SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
A.1
A.1.1
A.2
A.2.1
A.3
A.3.1
A.4
A.4.1
A.5
A.6
A.6.1
A.7
A.8
A.8.1
A.9
A.9.1
A.9.2
A.10
A.11
A.12
A.12.1
A.12.2
Description of Item
SUB HEAD A-EARTH WORK
Earth work in surface excavation not exceeding 30cm in depth but
exceeding 1.5m in width as well as 10 M2 on plan lead upto 50m and
lift
to soil
1.5m, disposed soil to be levelled and neatly dressed:
All up
kind
Unit
Unit Rate (Rs.)
Amount (Rs.)
5000
Sqm.
45.54
2,27,700.00
250
Cum
148.25
37,062.50
250
Cum
51.88
12,970.00
150
Cum
367.66
55,149.00
400
Cum
101.50
40,600.00
300
Cum
41.75
12,525.00
200
Cum.
843.65
1,68,730.00
5000
Sqm.
11.25
56,250.00
100
Per hour
55.00
5,500.00
50
Per hour
27.50
1,375.00
350
Per trolley
245.28
85,848.00
150
cum
123.85
18,577.50
5
2
Each
Each
2,000.00
5,000.00
10,000.00
10,000.00
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 M2 on plan) including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m.
All kind of soil.
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for
depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
All kind of soil.
Extra for excavating trenches for pipes, cables, etc., in all kinds of soil
for depth exceeding 3 m in depth & above.(Rate is over corresponding
basic item for depth upto 1.5 metre.)
All kind of soil.
Filling available excavated earth/fine sand/coarse sand/stone aggregate
(excluding rock) in trenches, plinth sides of foundation, etc. in layers not
exceeding 20cm in depth, consolidating EA deposited layer by ramming
and watering, lead up to 50M and with all lift.
Extra for every additional lift of 1.5 m or part thereof in excavation
/banking excavated or stacked materials.
All kinds of soil.
Supplying and filling in plinth with Jamuna sand under floors including
confirming Zone-III of IS : 383, watering, ramming consolidating and
dressing complete.
Surface dressing of the ground i/c removing vegetation, grass and in
equalities up to 15cm average deep and disposal of rubbish upto 50mt
lead as directed by EIC with all lead & lift.
All kinds of soil
Dewatering of the sewer manhole/ broken water mains or drains and the
like by deploying 5 HP to 8 HP dewatering pump i/c supplying of
labours, pumps, etc.
Pumps running with liquid fuel i/c cost of fuel
Pumps running with electricity with all cables etc. complete, but
electricity shall be provided by GAIL at free of cost.
Disposal of earth / rubbish / debris etc. from time to time by tractor
trolley (capacity not less than 2.5 cum net assumed 2 cum) including
supplying of labours for loading and unloading, necessary operators and
fuel etc. for tractor trolley to any place within or out side of
GAILGAON as directed by EIC( up to 5 Km).
Disposal of earth, aggregate, sand, dismantled or waste material etc.
from time to time by tractor trolley including supplying of labours for
loading and unloading, necessary operators and fuel etc. for tractor
trolley to any place within or outside GAIL GAON as directed by EIC.(
up to 5 Km)
Removing of roots of all type of trees and stacking of serviceable
material and disposal of unserviceable material from drains, building
foundations , sewer lins etc. (the girth of tree shall be measured at
ground level):
Up to girth of tree up to 300mm at ground level
Girth of tree beyond 300mm and up to 900mm at ground level
Total Part -A
B.1
Quantity
SUB HEAD B: CEMENT CONCRETE, R.C.C. WORK , BRICK
WORK ETC.
Providing and laying in position cement concrete of specified grade
excluding the cost of centring and shuttering-Work upto floor V level:
7,42,287.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
B.1.1
Concrete of mix 1:2:4 (1 cement: 2 coarse sand:4graded stone Aggregate
20 mm nominal size).
Concrete of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40mm nominal size).
Reinforced cement concrete work in walls (any thickness) suspended
floors,roofs,footing ,landing, walls chajjas,lintels,beams and
shelves,coloumns, balconies,facias up to floor five level excluding the
cost of cantering and shuttering finishing and reinforcement .
Concrete of mix 1:1.5:3 (1 cement: 1.5 coarse sand:3graded stone
Aggregate 20 mm nominal size)
Centering and shuttering i\c strutting and propping, etc.and removal of
form in all types of cement concrete and R.C.C. work at all levels.
Reinforcement for R.C.C., work including straightening cutting,
bending, binding and placing in position complete for work upto floor V
levels.
Cold twisted bars.
Dismantling cement concrete / pathway, brick work /PCC / etc. of any
mix as directed by EIC all complete.
Dismantling of RCC of any mix as directed by EIC all complete.
Dismantling including stacking of serviceable material and disposal
within 50 metres lead: -WBM/BM/SDBC.
Dismantling of tile work/stone work in flooring/ skirting/ dado/cladding
laid in cement mortar including stacking material within 50 mt lead for
thickness 10mm to 40mm.
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
with 50 metres lead.
Providing & fixing 40mm to 50mm thick precast cement concrete Jali
1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 6mm nominal size)
reinforced with 1.6 mm dia mild steel wire including centring and
shuttering, roughening cleaning, fixing and finishing in cement mortar
1:3 (1 cement: 3fine sand) etc. complete excluding plastering of the
jambs, sills and soffits .
Providing, hoisting and fixing upto floor five level precast reinforced
cement concrete in lintels, beams and bressumers including setting in
cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centering
and shuttering and finishing smooth with 6mm thick cement plaster 1:3
(1 cement: 3 fine sand) on exposed surfaces but excluding the cost of
reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size).
Extra for providing and mixing water proofing material like 'MASTER
PROOF" IWP-1' (M/s Choksey), Pidiproof LW (M/s Pidilite) or
equivalent ( AS PER IS: 2645-2003) in cement concrete work @ 100 ml
per 50Kg of cement or as specified by manufacturer.
Providing and mixing water proofing material in cement concrete work
or attending water seepage from the buildings as per manufacturer’s
specification of approved brand of M/s CICO, Dr. Fixit , Pidilite or as
directed by EIC.
Providing, supplying and adding plasticizer MASTERPLAST PL-1 or
EQUIVALENT (AS PER IS 9103-1973) in concrete at the rate, as
specified by the manufacturer. the rate, as specified by the
manufacturer.
Providing and fixing of precast cement concrete kerb stone of size 500
X 300 X 125 MM with cement slurry etc. complete of K K Manhole &
Grating Co. Pvt.Ltd. or equivalent.
Brick work with bricks of class designation 75 in foundation and plinth:
B.1.2
B.2
B.2.1
B.3
B.4
B.4.1
B.5
B.6
B.7
B.8
B.9
B.10
B.11
B.12
B.13
B.14
B.15
B.16
B.16.1
B.17
B.18
Cement mortar 1:6 (1 cement: 6 coarse sand)
Brick work with bricks of class designation 75 in super structure for all
floor levels in cement mortar 1:6 (1cement: 6 coarse sand)
Half brick work at any level with bricks of class designation 75 with
cement mortar 1:4 ( 1 cement :4 coarse sand ).
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
250
Cum
4,921.70
12,30,425.00
175
cum
3,920.65
6,86,113.75
200
Cum
6,319.20
12,63,840.00
450
Sqm..
309.80
1,39,410.00
3500
KG
66.50
2,32,750.00
100
Cum
598.06
59,806.00
10
Cum
1,176.40
11,764.00
10
Cum
108.90
1,089.00
200
Sqm.
32.65
6,530.00
300
Sqm.
18.15
5,445.00
50
Sqm..
641.80
32,090.00
10
Cum
7,484.20
74,842.00
50
Lts.
64.09
3,204.50
50
KG
95.00
4,750.00
50
Lts.
73.30
3,665.00
100
Each
75.00
7,500.00
60
Cum
4,170.75
2,50,245.00
100
Cum
5,325.10
5,32,510.00
100
Sqm..
647.90
64,790.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
Quantity
Unit
B.19
Extra for providing and placing in position in 2 nos. 6mm dia M.S. bars
at every third course of half brick masonry
100
5
B.20
Providing and fixing at or near ground level precast cement concrete in
kerbs, edgings etc., as per approved pattern and setting in position with
cement mortar 1:3 (1 cement ; 3 coarse sand ) including the cost of
required centering, shuttering, and finishing smooth with 6mm thick
cement plaster 1:3 (1 cement : 3 fine sand ) on exposed surface complete
including taking out of old Kerb wherever required and disposal within
township as directed by EIC with all lead & left 1:2:4 (1 cement: 2
coarse sand : 4 graded stone aggregate 20mm nominal size)
Unit Rate (Rs.)
Amount (Rs.)
Sqm..
69.50
6,950.00
Cum
5,236.95
26,184.75
46,43,904.00
Total Part -B
SUB HEAD - C : FINISHING WORK
C.1
C.1.1
C.1.2
C.1.3
C.2
C.3
C.4
C.5
C.6
C.7
C.8
C.9
C.9.1
Providing plastering work as per following:
12 mm thick plaster in 1:6 ( 1 cement :6 coarse sand )
6 mm thick plaster in 1:3 ( 1 cement :3 coarse sand )
15mm thick plaster in 1:6 (1 cement : 6 coarse sand)
Repairs to the plaster in patches or replastering as per the existing
thickness i/c cutting, dismantling old plaster in proper shape and raking
out the joints, applying the cement slurry and plastering the surface of
the wall complete at all floor levels i/c necessary scaffolding etc. and
disposal of the rubbish within township as directed by EIC with all lead
& lift & up to 20mm thick with cement mortar 1:4 ( 1 cement : 4 fine
coarse sand).
Neat Cement punning
Cement plaster 15mm thick with cement mortar 1:3 ( 1cement : 3coarse
sand ) finished with a floating coat of neat cement including rounding of
junctions where required.
Providing flush pointing on brick work, stone work with cement mortar
1:3 (1 cement : 3 fine sand) i/c raking out the old damaged joints
complete.
Flush Pointing on concrete pathway made between road kerb stone and
walkways etc. with cement mortar 1:3 (1 cement : 3 fine sand) including
raking out joints removal of rubbish, cleaning etc. wherever required,
complete with disposal of rubbish within township as directed by EIC..
Washed stone grit plaster on exterior walls of height upto 3M above
level in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4
coarse sand) furrowing the under layer with scratching tool, applying
cement slurry on the under layer @ 2 Kg of cement per square metre,
top layer 15mm cement plaster 1:1/2:2 (1 cement1\2 coarse sand: 2
stone chipping 10mm nominal size) in panels with groove all around as
per approved pattern including scrubbing and washing, the top layer
with brushes and water to expose the stone chippings, complete as per
specification and direction of Engineer-in-charge (payment for
providing grooves & scaffolding for work at height above 3m shall be
made separately)
Forming groove of uniform size in the top layer of washed stone grit
plaster as per approved pattern using wooden battens, nailed to the under
layer including removal of wooden battens, repair to the edges of panels
and finishing the groove complete as per specifications and direction of
the Engineer-in-charge of size 15- 25mm wide & 15 mm deep.
1500
250
500
Sqm.
Sqm.
Sqm.
142.25
120.35
164.75
2,13,375.00
30,087.50
82,375.00
750
Sqm.
221.15
1,65,862.50
1000
Sqm.
36.35
36,350.00
100
Sqm.
217.55
21,755.00
100
Sqm.
95.65
9,565.00
200
Sqm.
52.20
10,440.00
200
Sqm.
492.45
98,490.00
300
RM
29.45
8,835.00
100
Sqm.
8.55
855.00
Providing white wash with approved quality of lime on old or new work
with necessary scraping and applying putty, etc. ( two or more coats).
On old work with necessary scraping and applying putty etc. ( one or
more coats)
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
C.10.1
On new work with necessary scraping and applying putty etc. ( two or
more coats)
Distempering with dry distemper of approved brand and manufacture
and of required shade to give an even shade i/c necessary surface
preparation.
On old work (One ore more coat)
C.10.2
On new work ( two or more coats)
C.9.2
C.10
C.11
C.11.1
C.11.2
C.12
C.12.1
C.13
C.13.1
C.14
C.14.1
C.14.2
C.15
C.15.1
C.16
C.17
C.18
C.19
C.20
C.21
C.22
C.22.1
C.22.2
C.23
C.23.1
C.23.2
C.24
C.24.1
Finishing walls with water proofing cement paint of approved brand and
manufacture and of required shade to give an even shade.
Old work (one or more coats @ 2.20 kg/10 M2) complete.
New work (Two or more coats applied @ 3.84 kg/10 M2).
Finishing walls with textured exterior paint of required shade :
Old work (One or more coats) applied @ 1.82 ltr/10 M2
Finishing walls with Acrylic Smooth exterior paint of required shade:
Old work (One or more coat applied @ 0.90 ltr/10 M2).
Painting with synthetic enamel paint of approved brand and
manufacture and of required shade to give an even shade for wood/
steel work i/c necessary surface preparation.
On old work ( one or more coats )
On new work (two or more coats )
Wall painting with plastic/ acrylic emulsion paint of approved brand and
manufacture to give an even shade:
On old work of required shade ( one or more coats)
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade:Two or more coats on new work.
Repainting of GI pipes and fittings with approved quality synthetic
enamel paint for old work 15mm dia to 50mm dia pipes
Painting of GI pipe and fittings with synthetic enamel paint over a ready
mixed priming coat for new work 15mm dia to 50mm dia pipes.
Applying priming coats with ready mixed pink or grey primer of
approved brand and manufacture on wood work.
Applying priming coats with ready mixed red oxide/zinc chromate
primer of approved brand and manufacture on steel galvanized iron
/steel works.
Painting of GI pipe and fittings with two coats of anti corrosive
bitumastic paint of approved quality. (15mm dia to 80mm dia).
Distempering with OBD/ acrylic washable distemper (ready made) of
approved manufacturer and of required shade and colour complete, as
per manufacturer's specification.
New work (two or more coats) over and including water thinnable
priming coat with cement primer
One or more coats on old work
French spirit polishing to give smooth appropriate finish as directed by
EIC.
For new work Two or more coats i/c a coat of wood filler with all
necessary surface preparation complete.
One or more coats on old work
Stone work (machine cut edges) for wall lining etc. (veneer work) upto
10 metre height, backing filled with a grout of average 12 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment matching the stone shade : (To be secured to the backing and
the sides by means of cramps and pins which shall be paid for
separately) :
40 mm thick red sand stone
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
50
Sqm.
11.75
587.50
500
Sqm.
26.00
13,000.00
500
Sqm.
61.80
30,900.00
500
500
Sqm.
Sqm.
51.20
54.40
25,600.00
27,200.00
50
Sqm.
106.75
5,337.50
200
Sqm.
56.55
11,310.00
2000
1750
Sqm.
Sqm.
41.35
63.05
82,700.00
1,10,337.50
100
Sqm.
46.85
4,685.00
50
Sqm.
71.65
3,582.50
200
RM
7.18
1,436.00
100
RM
14.75
1,475.00
100
Sqm.
30.75
3,075.00
25
Sqm.
24.95
623.75
50
RM
10.70
535.00
4000
Sqm.
79.65
3,18,600.00
100
Sqm.
25.70
2,570.00
100
Sqm.
175.50
17,550.00
100
Sqm.
88.95
8,895.00
100
Sqm.
2,098.60
2,09,860.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
C.25
Wall lining butch work with Dholpur stone 40 mm thick rough facing
on the exposed surface with stone strips of minimum length 300 mm
and required width including embedding every tenth layer and bottom
most layer in masonry or concrete after making necessary chases of size
75x75mm and by providing layer of 75mm thick strips i/c 12mm thick
bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing
in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture
of pigment to match the shade of stone complete as per direction of
Engineer-in-charge.( scaffolding above 3 mt height will be paid
separately).
Providing and fixing copper pins 7.5 cm long 6 mm diameter for
securing adjacent stones in stone wall lining in cement mortar 1:2 (1
cement : 2 coarse sand) including making the necessary chases.
Providing and applying textured wall coating system consisting of twin
pack fine grade silica dry flakes / granules made of special grade of
'Heritage' or equivalent in approved shade and texture; mixed In-situ
with 100% acrylic polymer bonding agent; applied over plastered
surface; the flakes etc., bonding material, mixing, method of application
surface preparation, thickness etc. all shall be as per manufacturer's
recommendations and specifications. (Plaster to be paid separately).
Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer, 3mm thick water proofing membrane, black
finished reinforced with glass fibre matt consisting of a coat of bitumen
primer for bitumen membrane @ 0.40 ltr/M2. by the same membrane
manufactured of density at 25°C, 0.87 - 0.89 kg/ltr and viscosity 70 160 cps. Over the primer coat the layer of membrane shall be laid using
butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane
shall be as under : Joint strength in longitudinal and transverse direction
at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse
direction as 60/80N. Softening point of membrane not less than 150°C.
Cold flexibility shall be upto -2°C when tested in accordance with
ASTM, D - 5147. The laying of membrane shall be got done through the
authorised applicator of the manufacturer of membrane :
C.26
C.27
C.28
C28.1
C.29
C.30
C.31
C.32
3 mm thick
Filling the gap in between aluminium frame & adjacent RCC/ Brick/
Stone work by providing weather silicon sealant over backer rod of
approved quality as per architectural drawings and direction of Engineerin-charge complete Upto 5mm depth and 5 mm width.
Providing and fixing of G.I. chicken mesh on wall etc. as directed by
EIC including required
Melamine polishing on wood work (one more coat)
Varnishing with flatting of approved brand manufacture one or more
coats on old work.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
30
Sqm.
1,380.90
41,427.00
100
Each
29.10
2,910.00
10
Sqm..
900.00
9,000.00
200
Sqm.
399.75
79,950.00
10
RM
83.05
830.50
100
Sqm..
27.50
2,750.00
50
Sqm.
73.80
3,690.00
50
Sqm.
39.90
1,995.00
17,00,402.25
Total Part -C
SUB HEAD- D : FLOORING
D.1
D.1.1
D.2
D.3
Cement concrete flooring 1:2:4 (1 cement:2 coarse sand :4 graded stone
aggregate of 20mm nominal size) finished with a floating coat of neat
cement including cement slurry rounding off edges,etc in patch repair
or re-flooring as directed by EIC.
Upto 50mm thick with 20mm nominal size stone aggregates.
Providing & laying 30mm - 40mm thick fine dressed /rubbed red sand
stone flooring over 20mm (average) thick base with joints 5mm thick
finished flush base with 1:5 (1 cement: 5 coarse sand)
Repairing of old red sand stone including removal and refixing of old
sand stone with necessary levelling and dressing over 20 mm thick
average cement mortar 1:5 (1 cement ; 5 coarse sand ) including
pointing with cement mortar 1:2 ( 1 cement : 2 coarse sand) with as
admixture of pigment to match the shade of old surrounding flooring to
the stone.
350
Sqm..
316.80
1,10,880.00
100
Sqm.
627.03
62,703.00
500
Sqm.
200.00
1,00,000.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
D.4
Repairs/new marble chips flooring either skirting in patch or reflooring
40mm thick marble chips flooring rubbed and polished to granolithic
finish under layer 31mm thick cement concrete 1:2:4 (1cement: 2coarse
sand :4 graded stone aggregate 12.5 mm nominal size) and top layer
9mm thick with, required shade marble chips of size 4mm to 7mm
nominal size laid in cement marble powder mix 3:1 (3 cement:1 marble
powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7
marble chips) by volume including preparation of surface, laying of
cement slurry etc. complete as directed by E.I.C.
D.4.1
D.4.2
D.5
D.5.1
D.6
D.7
D.8
D.9
D.10
D.11
D.12
D.12.1
D.12.2
D.12.3
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
Light shade pigment with white cement
Light shade pigment with ordinary cement.
Kota stone slab flooring in floor/skirting/dado etc. over average 20mm
thick base laid over and joined with grey cement slurry mixed with
pigment to match the shade of the slab including rubbing and polishing
complete.
2
2
Sqm.
Sqm.
615.30
553.70
1,230.60
1,107.40
25mm thick in 1:4 (1 cement : 4 coarse sand)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS:15622 (thickness to be specified by the manufacture) of approved
make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, etc. over 12mm thick bed of
cement Mortar 1:3 (1 Cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg. per M2. including pointing in while cement
mixed with pigment of matching shades complete.
Providing and laying Ceramic anti skid floor tiles of any size (thickness
to be specified by the manufacturer) of 1st quality conforming to
IS:15622 of approved make in all colours, shades laid on 20mm thick
bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including
pointing the joints with white cement and matching pigments etc.
complete.
Providing and fixing " Durastone"/ Endura tiles of size upto 600mm X
600 mm of thickness as per manufactureres & of approved colour and
pattern\ laid over 20 MM cement mortar 1:6 (1 cement : 6 coarse sand)
jointed with cement slurry mixed with matching pigment complete of "
Somany " or "Johnson" or equivalent.
Providing and laying 20-22mm thick chequered pre-cast cement
concrete tiles of approved shade , make, pattern in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate of 10 mm nominal
size) mixed with pigment or without pigment on 20 mm thick (average)
bed of cement mortar 1:4 (1 cement : 4 coarse sand) including finishing
the joints including taking out old tiles and hacking the old surface
wherever required and disposal of rubbish etc. within township as
directed by EIC with all lead & lift.
Same as above but excluding the cost of chequered cement concrete tile
(the old tiles shall be provided by GAIL or available usable tile at site ).
50
Sqm.
1,100.85
55,042.50
500
Sqm.
793.60
3,96,800.00
500
Sqm.
834.05
4,17,025.00
100
Sqm.
1,400.00
1,40,000.00
50
Sqm.
819.15
40,957.50
20
Sqm.
88.00
1,760.00
20
Sqm.
660.00
13,200.00
10
10
10
Sqm.
Sqm.
Sqm.
3,132.05
1,435.70
1,555.90
31,320.50
14,357.00
15,559.00
Providing & fixing 20 mm thick both side machine cut & both side
polished with edges rounded off, kota stone in shelves wherever
required.
Marble stone flooring with 18mm thick marble stone (sample of marble
shall be approved by Engineer-in-charge) over 20mm (average) thick
base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed
with cement slurry including rubbing and polishing complete with:
Markrana white second quality as approved by EIC
Raj nagar plain as approved by EIC
Udaipur green marble as approved by EIC
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
D.13
Providing and fixing 18mm thick gang saw cut mirror polished
premoulded and prepolished) machine cut for kitchen platforms, vanity
counters, window sills , facias and similar locations of required size of
approved shade, colour and texture laid over 20mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels. area of slab over 0.50 M2
Grinding & polishing on marble work/ GRANITE WORK /kota stone
work / terazzo flooring or other flooring, where ever required to give
high gloss finish complete with all labour and materials, etc.
Making moulding in marble / granite etc. with polisihing as directed by
EIC.
Providing and laying polished vitrified floor tiles in different sizes
(thickness to be specified by the manufacturer) with water absorptions
less than 0.08% and confirming to IS : 15622 of approved make in all l
colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4
coarse sand) including grouting the joints with white cement and
matching pigments etc., complete. size of tile 600x600mm
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08%
and conforming to IS: 15622, of approved brand & manufacturer in all
colours and shade in skirting, riser of steps, laid with cement based high
polymer modified quick set tile adhesive (water based) conforming to
IS: 15477, in average 6 mm thickness, including grouting of joints of
tile size 600mmx600mm.
Proving and fixing/repairing Glass Mosaic Tiles 25mmX25mm size wall
cladding with approved designs,pattern and colours as per direction of
Engineer In Charge.
Providing and laying bitumen mastic wearing course (as per
specifications) with industrial bitumen of grade 85/25 conforming to IS :
702 prepared by using mastic cooker and laid to required level and slope
including providing antiskid surface with bitumen precoated fine
grained hard stone chipping of approved size at the rate of 0.005 cum
per 10 M2 and at approximates spacing of 10cm centre to centre in both
directions, pressed into surface protruding 1mm to 4mm over mastic
surface, including cleaning the surface, removal of debris etc. all
complete. ( Considering bitumen using 10.2% as per MORTH
specification .)
25mm thick.
40 mm thick
Providing and laying 40mm thick Cement concrete chequered tiles of
approved made of 400 x 400 mm size with required colour over and
including 20mm thick (avg.) bed of cement mortar 1:6 (1 cement : 6
coarse sand) including finishing the joints complete using cement with
pigment.
D.14
D.15
D.16
D.17
D.18
D.19
D.19.1
D.19.2
D.20
D.21
D.22
D.23
D.23.1
D.24
Providing and laying 60mm thick factory made cement concrete
interlocking paver block of M-30 grade made by block making machine
with strong vibratory compaction and of approve size and design/ shape
laid in required colour and pattern over and including 50mm thick
compacted bed of course sand , filling the joints with coarse sand etc. all
complete as per the direction Engineer-In-Charge .
Removing the existing brick on edge flooring and relaying the same by
using the same bricks after removing the mortar and debris in required
level and slope( cost of cement, sand shall be paid separately)
Brick on edge flooring with bricks of class of designation 75 laid over
12mm cement mortar including & grouting with cement slurry etc.
complete in cement mortar with F.P.S bricks.
1:6 (1 cement : 6 coarse sand) with FPS bricks
Dry brick on edge flooring with bricks of class designation 7.5 on a bed
of 12mm mud mortar including filling joints with Jamuna sand( with
F.P.S. bricks)
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
10
Sqm.
3,769.70
37,697.00
2000
Sqm.
196.85
3,93,700.00
500
RM
210.65
1,05,325.00
50
Sqm.
1,402.55
70,127.50
250
Sqm.
1,597.20
3,99,300.00
5
Sqm.
1,586.70
7,933.50
25
25
Sqm.
Sqm.
811.95
1,299.15
20,298.75
32,478.75
20
Sqm.
600.00
12,000.00
50
Sqm.
543.39
27,169.45
50
Sqm.
110.00
5,500.00
200
Sqm.
615.40
1,23,080.00
25
Sqm.
508.40
12,710.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
D.25
Providing and fixing homogeneous Polyvinyl chloride sheet / tile in
flooring and skirting in approved pattern on a smooth and damp proof
base using rubber based adhesives of approved quality and manufacturer
like Dunlop S-758, Fevicol SR 998 or equivalent including rolling with
light wooden roller weighing about 5Kg all complete as directed by
Engineer-in-charge, in approved colour and shade including removal of
existing damaged PVC flooring & preparation of surface wherever
required.
2.0 mm thick (sheet)
2.0 mm thick (tile)
38mm thick wood block flooring of first class teak wood laid over
25mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 10mm nominal size) to be paid
separately coated with a thin layer of hot bitumen penetration 80/25
(blown type) @ 2.45 kg per M2. including fixing blocks in position after
dipping in hot bitumen (blown type) up to half depth, planed, levelled
smooth and finished complete.
Providing and laying 8.3 mm thick( S-C-3) laminated wooden flooring 7
cut panel skirting ( matt finished) consisting of panels of size 1194mm
x 194mm having class of use - 23 / 33, wear resistance level of AC-4 as
per EN 13329 with a high pressure laminate surface treated with
aluminium oxide and a specially painted surfaces guard + on top of a
high density fibre board with a density of 910 kg / cum. including PE
foam and polyethylene sheet complete as per specified below. The
panels having a click system tongue and groove joint to secure a long
lasting joint with the edges duly impregnated with paraffin. The floating
laminate flooring shall be laid over a 0.20mm thick polythene film to
form a vapour barrier and 2mm to 3mm thick foam or equivalent under
layer to reduce impact sound etc., complete all as per manufacturers
specification and directions of Engineer in charge at all height and levels
etc. for: ( Basic cost Rs 1500/- Per M2).
Door profile for above item ( Basic cost of flooring Rs.350.72/- per
metre.)
D.25.1
D.25.2
D.26
D.27.1
D.27.2
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
100
10
Sqm.
Sqm.
1,027.47
1,091.77
1,02,747.00
10,917.70
5
Sqm.
6,377.10
31,885.50
10
Sqm.
1,938.28
19,382.77
10
RM
490.07
4,900.72
28,19,096.14
Total Part -D
SUB HEAD - E: ROOFING & STEEL WORK
E.1
E.2
Providing corrugated / plain G.S. sheet roofing fixed with polymer
coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and
G.I. limpet washers or with G.I. limpet washers filled with white lead
and including a coat of approved steel primer and two coats of approved
paint on overlapping of sheets complete (for all slopes, vertical surface,
circular surface etc.) excluding the cost of purlins, rafters and trusses.
0.80 mm thick with zinc coating not less than 275 gm/M2 at all height.
Providing ridges or hips of width 60cm over all width plain G.S. sheet
fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I.
limpted and bitumen washers complete. 0.80 mm thick with zinc
coating not less than 275 gm/M2.
5
Sqm.
813.35
4,066.75
10
RM
539.45
5,394.50
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
E.3
Supply & Fixing of Pre-painted coloured Trapezoidal profiled sheeting
1000-1020 mm cover width, 28 -30 mm high crests manufactured out of
0.50 mm TCT hi-tensile pre-painted Zincalume /Galvalume steel (AZ150 gsm. Aluminium –Zinc alloy metallic coating of total both sides 550
Mpa yield stress as per AS-1397). Colour/ Exterior coat of SMP (Silicon
Modified Polyester) / BHP XRW paint system, 20 micron top coat
applied over 5 micron primer and a 5 micron polyester back coat
applied over 5 microns primer OR equivalent coating/painting. The
sheet shall have wide pans with stiffening ribs for effective water
shedding and special male/female ends with full return legs on side laps
for purlin support. The male end of the sheet shall have anti-capillary
flute at side laps to prevent leakages. The sheet shall be fixed by means
of Galvanised self-drilling self tapping fasteners (12-14x55 with EPDM
seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs
long to suit site dimensions. The scope includes all sealing of joint,
curves , edges or other accessories with silicon sealant.
E.4
E.5
The bidder may consider CLIPLOCK system instead of self drilling
screw system without any change in specification, rates and terms and
conditions of the work.
The work will include cost of all labour, equipments, materials,
submission of shop drawing, cost of consumables, fasteners/CLIP
LOCK, washers etc. The work is to be carried out directly as per
specifications and direction of engineer incharge and the manufacturer.
- 0.50 mm thick TCT (Total Coated Thickness) / 0.45 BMT (Base
Metal Thickness) precoated sheet of make "TATA BlueScope", "Lloyd"
, Interacrh or equivalent confirming with minimum tensile strength 550
Mpa confirming AS : 1397. The sheet should pass 1000 hour salt test as
per relevent test.
Supply & Fixing of Pre-painted coloured Trapezoidal profiled / PLAIN/
CURVED & PROFILED sheeting in ridges, curved surface, North light
Curve, Apron Piexce Gutter etc., manufactured out of 0.50 mm TCT hitensile pre-painted Zincalume /Galvalume steel (AZ-150 gsm.
Aluminium –Zinc alloy metallic coating of total both sides 550 Mpa
yield stress as per AS-1397). Colour / Exterior coat of SMP (Silicon
Modified Polyester) / BHP XRW paint system, 20 micron top coat
applied over 5 micron primer and a 5 micron polyester back coat
applied over 5 microns primer OR equivalent coating/painting. The
sheet shall be fixed by means of Galvanised self-drilling self tapping
fasteners (12-14x55 with EPDM seals). The sheet shall be supplied in
lengths maximum upto 6-12 Mtrs long to suit site dimensions. The
scope includes all sealing of joint, curves , edges or other accessories
with silicon sealant. The bidder may consider CLIPLOCK system
instead of self drilling screw system without any change in specification,
rates and terms and conditions of the work.
The bidder may consider CLIPLOCK system instead of self drilling
screw system without any change in specification, rates and terms and
conditions of the work.
The work will include cost of all labour, equipments, materials,
submission of shop drawing, cost of consumables, fasteners/CLIP
LOCK, washers etc. The work is to be carried out directly as per
specifications and direction of engineer incharge and the manufacturer.
- 0.50 mm thick TCT (Total Coated Thickness) / 0.45 BMT (Base
Metal Thickness) precoated sheet of make "TATA Blue Scope", "Lloyd"
, Interacrh or equivalent confirming with minimum tensile strength 550
Mpa confirming AS : 1397 The sheet should pass 1000 hour salt test as
per relevent test.
Steel work welded in built up section / single section / framework I/c
cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer using structural steel etc. as required for any type
of structural steel work welded or bolted or riveted or fixed or grouted in
concrete or any other type of work within the plant boundary etc.at all
height as per direction of EIC.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
25
Sqm.
631.28
15,781.98
10
Sqm.
631.28
6,312.79
5000
KG
73.65
3,68,250.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
E.6
Steel work welded in built up sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of approved
steel primer using structural steel etc. as required.
In stringers, treads, landings etc. of stair cases including use of
chequered plate wherever required, all complete.
In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works.
Providing and fixing hand rail of approved size by welding etc. to steel
ladder railing, balcony railing, staircase railing and similar works,
including applying a priming coat of approved steel primer.
M.S. tube.
G.I. pipes
Steel work in built up tubular ( round, square or rectangular hollow
tubes etc.) trusses etc. including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete
Hot finished welded type tubes
Removing old fencing & Re- fixing Chain link fencing of standard
design of 10 SWG with 50x50 mm diamond shape with 5 rows of
strainer GI 8 SWG & U clamps, the old fencing will be supplied by
GAIL & including the cost of GI 8 SWG strainers & U clamps as
directed by EIC.
E.6.1
E.6.2
E.7
E.7.1
E.7.2
E.8
E.8.1
E.9
E.10
E.11
E.12
E.13
E.13.1
E.13.2
P&F Chain link fencing of 10 SWG guage with 50x50 mm diamond
shape. Chain link GI hot dipped, rates are inclusive of 5 rows of strainer
GI 8 SWG which to be fixed fixed with chain link properly by U clamps
if required including taking out the old damaged fencing wherever
applicable and stacking the same as directed by EIC.
Providing & erecting galvanized punched tape Concertina Coil (PTCC,
single coil ) of approx. 610mm dia having thickness of spring core wire
2.5 mm thick and tape 0.5mm thick, number of circle in one coil shall
be 60 nos, weight of coil shall be 10-11 kg/ coil and coverage of the one
coil shall be 8-10 running meter and The spring core wire to be hot
dipped and average galvanising coating shall be 230gm/M2. Coil shall
be properly binded with J clips & horizontal wire & shall be erected on
top of existing boundary wall. The cost shall include Quater pin and J
Clips as per specifications including all fixing arrangements required to
fully tie the coil on top of existing boundary to the entire satisfaction of
EIC.
The rate quoted shall be for running meter of the coil in final laid
position inclusive all fixing arrangements etc.as asked in the item.
Further, the coil to be approved by GAIL and the - work shall be got
executed through specialised agency (to be approved by GAIL) having
similar experience in the field.
Supply of MS bush/pivot for gate repairing as directed by EIC
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a priming
coat of approved steel primer.
Using M S Angles 40 X 40 X 6 mm for diagonal braces
Using flats 30x6mm for diagonal braces & central cross piece sections.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
100
KG
74.30
7,430.00
200
KG
86.50
17,300.00
200
200
KG
KG
97.45
105.15
19,490.00
21,030.00
100
KG
95.85
9,585.00
500
Sqm.
151.80
75,900.00
200
Sqm.
525.55
1,05,110.00
1800
RM
220.00
3,96,000.00
15
Each
88.00
1,320.00
10
Sqm.
2,942.00
29,420.00
10
Sqm.
2,785.45
27,854.50
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
E.14
Providing and fixing pressed steel door frames conforming to IS: 4351
manufactured from commercial mild steel sheet of 1.60 mm thickness
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed
mild steel welded or rigidly fixed together by mechanical means,
including M.S. pressed butt hinges, 2.5mm thick with mortar guards,
lock strike-plate and shock absorbers as specified and applying a coat of
approved steel primer after pre-treatment of the surface as directed by
Engineer-in-charge. Items also includes the filling of frame frofile with
cement concrete 1:2:4 ( 1 cement: 2 coarse sand:4 stone aggregate
12.5mm nominal size) including shuttering for filling concrete, before
fixing at site as per direction of EIC.
Profile B- Fixing with adjustable lugs with split end tail to EA jamb.(
single rebate frame)
Profile C- Fixing with adjustable lugs with split end tail to EA jamb.(
double rebate frame)
Profile E- Fixing with adjustable lugs with split end tail to EA jamb. (
composite frame profile both side double rebate )
Grading roof mixed with water proofing compound as recommended by
manufacturer with:
Cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size)
Cement mortar 1:3 ( 1 cement: 3 coarse sand) avg. 15 mm thick
Fabrication of various structure steel sections/ or laying Reinforcement
at all levels for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete. Or as directed by EIC.
Structural steel will be supplied by GAIL at free of cost. The item
includes transportation charges from warehouse to the site of
fabrication and from site of fabrication to the site of installation. The
item also includes cost of all tools & tackles consumables taxes etc.
including contractor profit and overhead and complete in all respect
Providing and applying two part, tough and electrometric Polysulphide
Sealant, conforming to BS:4254, Dr. Fixit Pidiseal PS of M/s Pidilite
Industries Ltd., or equivalent in the expansion joint as per
manufacturer’s specifications including providing and fixing of back up
material like close cell polyethylene foam board , masking tape,
application of compatible primer Dr. Fixit Pidiprime A, , tooling,
finishing, removal of masking tape etc.for all sizes of expansion joints.
Servicing / repairing of the M.S. rolling shutters of all size complete
including necessary greesing,oiling, denting and repairing, ensuring the
satisfactory operation of rolling shutter in all respect etc.. Item includes
supplying &fixing of any kind of part excluding ball bearing, gear box
and shaft etc.
i) up to 10 M2
ii) above 10 M2
Providing & fixing of bearing/ crank shaft etc. for rolling shutter.
Supplying and fixing rolling shutters of approved make, made of
required size M.S. laths, interlocked together through their entire length
and jointed together at the end by end locks, mounted on specially
designed pipe shaft with brackets, side guides and arrangements for
inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire
springs manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 – part 1 and M.S. top cover of required
thickness for rolling shutters
80x0.9 mm MS laths with 0.9mm thick top cover.
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2mm and braced with flat iron diagonals 20x5mm size,
with top and bottom rail of T-iron 40x40x6mm, with 40mm dia steel
pulleys, complete with bolts, nuts, locking arrangement, stoppers,
handles, including applying a priming coat of approved steel primer.
E.14.1
E.14.2
E.14.3
E.15
E.15.1
E.15.2
E.16
E.17
E.18
E.18.1
E.18.2
E.19
E.20
E.20.1
E.21
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
10
RM
360.50
3,605.00
10
RM
383.75
3,837.50
5
RM
418.60
2,093.00
5
Cum
5,021.05
25,105.25
5
Cum
8,116.10
40,580.50
500
KG
12.27
6,132.50
50
KG
489.58
24,479.00
5
5
5
Each
Each
Each
825.00
1,430.00
1,100.00
4,125.00
7,150.00
5,500.00
5
Sqm.
1,738.30
8,691.50
5
Sqm.
4,977.95
24,889.75
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
E.22
Providing & fixing non-asbestos high impact Polypropylene reinforced
cement 6mm thick corrugated sheets (as per IS: 14871) roofing up to
any pitch and fixing with polymer coated J, or L hooks, bolts and nuts
8mm dia. G.I. plain and bitumen washers or with self drilling fastener
and EPDM washers etc. complete (excluding the cost of purlins, rafters
and trusses), including cutting sheets to size and shape wherever
required.
Providing and fixing all type of ridges and hips in non asbestos fibre
cement high impact polypropylene reinforced roofing with suitable
fixing accessories or self drilling fastener and EPDM washers etc.
complete
Providing of self adhesive bitumastic tape of STP or equivalent for
patch repairing work wherever required.
50 MM Width
100 MM Width
Supply of Galvanized steel barbed wire
Providing of M.S.welded wire mesh of required size and of approved
quality.
Providing & fixing 6mm thick plain clear embossed Polycarbonate sheet
U/V stabilized for sheds, canopies, etc. with self driven screws,
aluminium trapezoidal top & tottom section, EPDM gasket, etc.
complete as per direction of EIC. ( the actual work done will be
measured for payments.)
E.23
E.24
E.24.1
E.24.2
E.25
E.26
E.27
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
10
Sqm.
389.45
3,894.50
20
RM
338.45
6,769.00
10
10
100
RM
RM
KG
88.00
165.00
52.00
880.00
1,650.00
5,200.00
100
KG
55.00
5,500.00
10
Sqm.
1,650.00
16,500.00
13,06,828.02
Total Part -E
SUB HEAD - F: WOOD WORK & ALUMINIUM WORK ETC.
F. 1
Supply of following materials of approved brand & manufacturer at site
including carriage, all taxes & duties etc. , as per instructions of EIC.
F.1.1
F.1.2
F.1.3
F.1.4
F.1.5
F.1.6
F.1.7
F.1.8
Glass panes 4mm thick
Glass panes 5mm thick.
4 mm thick frosted
8 mm thick plain glass panes with edges rounded off
10 mm thick plain glass panes with edges rounded off
12 mm thick plain glass panes with edges rounded off
5 mm thick wired glass sheet
Decorative glass shelf supports of S.S./ Brass with necessary screws etc.
complete, suitable for glass of 5 to 10 MM thickness
Decorative glass door pivot of S.S./ Brass with necessary screws etc.
complete, suitable for glass of 8 to 12 MM thickness including it's
placement / fixing as directed by EIC
Decorative handle of S.S./ Brass or other suitable material, with
necessary screws etc. complete, suitable for glass of 8 to 12 MM
thickness including it's placement / fixing as directed by EIC
Decorative knob of S.S./ Brass or any other material, with necessary
screws etc. complete ,suitable for glass of 8 to 12 MM thickness
including it's placement / fixing as directed by EIC
Decorative locking arrangement for glass doors of showcase with all
necessary accessories complete including it's placement / fixing as
directed by EIC
Stainless Steel wire mesh of average width of aperture 1.4mm with wire
of dia 0.50 mm
2nd class Teak wood beading of size 40mm X 12 mm
2nd class Teak wood beading of size 18 mm X 5 mm
2nd class Molded beading 25mm to 40mm x avg 5mm thick
2nd class teak wood lipping 25x3mm
4 mm thick Teak ply wood plain lining
6 mm thick commercial ply wood
8 mm thick commercial ply wood
12 mm thick commercial ply wood
F.1.9
F.1.10
F.1.11
F.1.12
F.1.13
F.1.14
F.1.15
F.1.16
F.1.17
F.1.18
F.1.19
F.1.20
F.1.21
400
20
10
10
10
10
10
Sqm.
Sqm..
Sqm..
Sqm.
Sqm.
Sqm.
Sqm.
330.00
500.00
330.00
660.00
770.00
880.00
1,100.00
1,32,000.00
10,000.00
3,300.00
6,600.00
7,700.00
8,800.00
11,000.00
20
Each
55.00
1,100.00
10
Each
250.00
2,500.00
10
Each
200.00
2,000.00
10
Each
55.00
550.00
10
Each
200.00
2,000.00
400
Sqm.
830.00
3,32,000.00
500
10
100
50
10
150
10
10
RM
RM
RM
RM
Sqm.
Sqm.
Sqm.
Sqm.
125.00
30.00
100.00
22.00
242.00
360.00
840.00
580.00
62,500.00
300.00
10,000.00
1,100.00
2,420.00
54,000.00
8,400.00
5,800.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
F.1.22
F.1.23
F.1.24
F.1.25
F.1.26
F.1.27
F.1.28
F.1.29
F.1.29.1
F.1.29.2
F.1.30
F.1.30.1
F.1.30.2
F.1.31
F.1.32
F.1.32.1
F.1.32.2
F.1.32.3
F.1.32.4
F.1.32.5
F.1.33
Description of Item
18 mm thick block board with commercial ply veneering on both side
25 mm thick block board with commercial ply veneering on both side
1mm thick laminated sheet
24 gauge anodized aluminium sheet
18 mm thick Prelaminated particle board with one side decorative and
other side balancing lamination, flat pressed 3 layer & graded (medium
density) grade I, type II conforming to IS:12823 (exterior grade)
25 mm thick Prelaminated particle board with one side decorative and
other side balancing lamination, flat pressed 3 layer & graded (medium
density) grade I, type II conforming to IS:12823 (exterior grade)
Supply of putty for wood work & steel work
Oxidised mild steel sliding door bolt
300mm x16 mm
250 mm x16 mm
Oxidised mild steel tower bolt
250x10 mm
200x10 mm
Nickel plated mild steel piano hinges 1 mm thick 35 mm wide
Aluminium tower bolts anodized transparent or dyed / powder coated
300x10 mm
250x10 mm
200x10 mm
150x10 mm
100x10 mm
Aluminium sliding door bolt anodized transparent or dyed / powder
coated
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
50
20
10
10
Sqm.
Sqm.
Sqm.
Sqm.
700.00
900.00
350.00
202.40
35,000.00
18,000.00
3,500.00
2,024.00
5
Sqm.
699.38
3,496.90
5
Sqm.
792.55
3,962.75
200
KG
220.00
44,000.00
20
20
Each
Each
95.00
90.00
1,900.00
1,800.00
10
10
100
Each
Each
RM
45.00
40.00
45.00
450.00
400.00
4,500.00
10
200
100
500
100
Each
Each
Each
Each
Each
75.00
60.00
48.00
38.00
30.00
750.00
12,000.00
4,800.00
19,000.00
3,000.00
F.1.33.1
F.1.33.2
F.1.34
F.1.34.1
F.1.34.2
F.1.34.3
F.1.35
F.1.36
300 X 16 mm
250 X 16 mm
Aluminium handles anodized transparent or dyed / powder coated
125 mm
100 mm
75 mm
Aluminium round shape handle (anodised AC 15)/ powder coated
Aluminium hasp and staples up to 75 mm size anodized / powder coated
100
100
Each
Each
160.00
130.00
16,000.00
13,000.00
400
500
100
10
Each
Each
Each
Each
50.00
38.00
32.00
49.00
20,000.00
19,000.00
3,200.00
490.00
25
Each
25.30
632.50
F.1.37
F.1.38
Aluminium hook and eye up to 200mm long anodized / powder coated
Aluminium hanging floor door stopper anodized transparent or dyed
Twin rubber stopper/ powder coated
Rubber pad/ buffer up to 50mm long.
Brass 100mm mortice latch and lock and a pair of anodized aluminium
lever handles/ powder coated
Brass night latch of approved quality
Aluminium casement stays anodized coating transparent or dyed 250mm
/ powder coated
100
Each
22.00
2,200.00
500
Each
65.00
32,500.00
100
Each
12.10
1,210.00
250
Each
260.00
65,000.00
2
Each
495.00
990.00
50
Each
50.00
2,500.00
50
Each
315.00
15,750.00
50
Each
300.00
15,000.00
500
RM
80.00
40,000.00
500
Pair
8.00
4,000.00
20
Each
840.00
16,800.00
F.1.39
F.1.40
F.1.41
F.1.42
F.1.45
F.1.46
A pair of anodized Al. lever handle for 100 mm mortice latch & lock/
powder coated
Bright finished brass 100 mm mortice latch with one dead bolt and a
pair of lever handles of existing matching colour
Nickel plated MS pipe from 20mm to 25 mm dia
Nickel plated MS bracket for curtain rod
F.1.47
Universal Hydraulic door closer (ISI make)
F.1.48
F.1.49
F.1.50
Bright finished brass cup board or wardrobe locks of size 65mm
Multipurpose lock 65 mm for drawers, etc.
5 mm thick superior quality mirror glass sheet including backing 6 mm
ply
100
10
Each
Each
80.00
50.00
8,000.00
500.00
25
Sqm.
1,148.15
28,703.75
Mirror of superior make glass 60x45 cm
Hard board 6 mm thick
20
10
Each
Sqm.
310.00
175.00
6,200.00
1,750.00
F.1.43
F.1.44
F.1.51
F.1.52
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin
bonded) (600x600x12 mm)
F.1.54 Semi perforated ceiling tiles (600x600x12 mm)
F.1.55 3 mm thick translucent white acrylic plastic sheet
F.1.56 Double action hydraulic floor spring as per IS: 6315 marked and
stainless steel cover plate
F.1.57 Magnetic catchers
F.1.58 Heavy duty telescopic channels for drawers of length of 12 inch to 24
inch
F.1.59 Sliding glass Al. channels of sizes 25mm x 12mm ( E- section )
F.1.60 Glass runner for glass sliding shutters for showcase ,etc.
F.1.61 Al. powder coated door sills
F.1.62 Spring door closer
F.1.63 Rubber based Adhesive ( SR-998 of Fevicol or equivalent)
F.1.64 25mm dia Aluminium plastic coated decorative type curtain rod
F.1.65 Bracket for fixing 25mm dia Aluminium plastic coated decorative type
curtain rod
F.1.66 Supply of the following items
F.1.66.1 All sizes of aluminium beading for Al. doors / windows to match the
existing type with or without powder coating as directed by EIC.
F.1.66.2 PVC / neoprene felt
F.1.67 19 mm dia decorative Aluminium curtain rod in wood/ cedar finish
Vista or equivalent with necessary screws etc. complete.
F.1.68 Bracket / end cap for above item Vista or equivalent with necessary
screws etc. complete.
F.1.69 Curtain hook for above Vista or equivalent with necessary screws etc.
complete.
F.1.70 Providing wood work in frames of door windows/clear storey windows
and other frames, wrought framed fixed in position including primer
and painting two or more coats with synthetic enamel paint of approved
brand & manufacture item includes repairing of plaster, touching/
painting of damaged wall as per existing wall paint finish & shade
complete in all respect wherever required.
F.1.53
F.1.70.1 IInd class teak work
F.1.70.2 Sal Wood
F.1.71 MS butt hinges with necessary screws etc. complete, up to 125 mm long
F.1.72
F.1.73
F.1.74
F.1.75
F.2
F.2.1
F.3
F.4
Motorized Roller blinds motor
Roller blinds remote
12 mm thk Toughend glass frame less door
Toughend door fitting Door ' patch fitting( Total 5 Items) Make Doorma
Top patch, Bottom patch, Corner Bottom lock Patch, Glass door Pivot
,Floor Spring
Providing and fixing 32/35 MM panelled or panelled and glazed
shutters for doors, windows and clerestory windows including ISI
marked black enamelled M.S. butt hinges with necessary screws
excluding, panelling (which will be paid for separately, taking out the
old shutter wherever required and depositing the same with GAIL.
Second class teak wood
Providing and fixing 32/35 mm thick ISI marked flush door shutters nondecorative type, core of block board construction with frame of 1st class
hard wood and well matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both faces of shutters
including ISI marked Stainless Steel butt hinges with necessary screws.
including 2nd class teak wood lipping 25 mm minimum depth on all
edges of shutter) overall area of door shutter to be measured) worn-out
shutter wherever required to be deposited with GAIL.
Extra for providing and fixing flush doors with teak veneering in place
of commercial veneered ply.On one side in item No. F.3 above.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
10
Each
120.00
1,200.00
10
5
Each
Sqm.
120.00
570.00
1,200.00
2,850.00
30
Each
1,700.00
51,000.00
100
Each
20.00
2,000.00
20
Each
140.00
2,800.00
20
20
100
500
10
100
RM
Each
RM
Each
KG
RM
55.00
8.00
77.00
75.90
110.00
100.00
1,100.00
160.00
7,700.00
37,950.00
1,100.00
10,000.00
50
Each
20.00
1,000.00
60
RM
55.00
3,300.00
100
RM
22.00
2,200.00
10
RM
165.00
1,650.00
25
Each
55.00
1,375.00
25
Each
16.50
412.50
0.5
0.5
Cum
Cum
90,495.80
73,331.40
45,247.90
36,665.70
50
Each
133.70
6,685.00
2
1
5
Each
Each
Sqm.
10,800.00
7,650.00
1,900.00
21,600.00
7,650.00
9,500.00
2
Each
14,119.00
28,238.00
5
Sqm.
2,563.75
12,818.75
25
Sqm.
1,684.75
42,118.75
10
Sqm.
394.90
3,949.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
F.5
Providing and fixing 32/35mm thick wire gauge shutter using
galvanized M.S. wire gauge of I.S. gauge of designation 85G with wire
of dia 0.63mm doors windows and clerestory windows including
necessary screws black enamelled Ms butt hinges etc. wherever required
with second class teak wood including primer and painting two or more
coats with synthetic enamel paint of approved brand & manufacture
including removal of damaged shutter & its disposal as directed by EIC.
F.6
F.6.1
F.6.1.1
F.6.1.2
F.6.2.
F.6.2.1
F.6.2.2
F.7
F.7.1
F.8
F.8.1
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular and other sections
of approved make conforming to IS: 733 and IS: 1285, anodized
transparent of dyed to required shade according to IS: 1868 (minimum
anodic coating of grade AC 15), fixed with rawl plugs and screws or
with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and sides with required
including PVC/neoprene felt etc. Aluminium sections shall be smooth
rust free straight mitered and jointed mechanically wherever required
including cleat angle, aluminium snap beading for glazing/ panelling,
C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing, fittings
and panelling to be paid for separately).
For fixed portion
Anodized aluminium (anodized transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15)
Power coated aluminium (minimum thickness of powder coating 50
micron)
For shutters of doors, windows & ventilators including providing and
fixing hinges/pivots and making provision for fixing of fittings
wherever required.
Anodized aluminium (anodized transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15)
Power coated aluminium (minimum thickness of powder coating 50
micron)
Providing and fixing 12mm thick prelaminated three layer medium
density (exterior grade) particle board Grade I, Type II conforming to IS:
12823 bonded with phenol formaldehyde synthetic resin, of approved
brand and manufacture in panelling with C.P. brass/ stainless steel
screws etc. complete as per architectural drawings and directions of
engineer-in-charge.
Providing & fixing Pre-laminated particle board with decorative
lamination on one side and balancing lamination on other side
P&F in position 100 mm. Fabric louvers blinds of high quality material
weave and finish fabric with resistance to abrasion. The mechanism
will be incorporated in 35mmx30mm. Powder coated extruded
aluminium head rail. The rail will have delrin aceatal resistance to
abrasion. The mechanism will be incorporated in 35mmx30mm. Powder
coated extruded aluminium head rail. The rail will have delrin aceatal
resin wheels and delrin hooks, interconnected by stainless spring steel
spacer. All blinds are to be equally spaced with a minimum overlap of
17mm in closed fully titled position. The louvers will be controlled with
left or right hand mechanism as instructed with the hooks to which
louvers are attached to be of self centering type which automatically
maintains the vanes (louvers) in parallel. The traverse of louver to be
controlled by a polyester braided cord tensioned by weight and attached
to leading vane. Rotation or tilting of vanes to be controlled by ball
chain which revolves a shaft actuating a gear mechanism. The rotation
of vances to be 180 degree in both directions.
The price shall be complete including necessary screws, plugs, cutting
adjusting the blinds to required shape where necessary to entire
satisfaction of engineer-in-charge. Approved make shall be of VISTA
or MAC
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
50
Sqm.
2,914.00
1,45,700.00
100
KG
343.70
34,370.00
500
KG
373.00
1,86,500.00
50
KG
397.75
19,887.50
500
KG
427.60
2,13,800.00
50
Sqm.
1,017.25
50,862.50
25
Sqm..
1,000.00
25,000.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
F.9
Providing and fixing/repairing of Semi - Unitised System Based
Structural Glazings complete in all respect as per the Elevation / Section
/ Plan Drawings enclosed, fabricated out of Heavy Duty Aluminium
Extruded Profiles of Mahavir Aluminium Ltd. or equivalent make as
per the Sections provided at MPH comprising of Corners Mullion,
Normal Mullion, Top and Bottom Transom, Normal Transom and
double Glass Glazing Shutter. All profiles conforming to Alloy 63400
WP with Chemical Composition and Mechanical Properties as per IS733; all profiles anodized in approved shade and all profiles provided
with Masking Tapes to provide safety against external scratches at site
(Masking Tapes to be removed only at the time of handing over as per
the instructions of the Engineer). ( the cost of glazing will be paid in
separate item)
Providing & fixing double glazed dual sealed insulated glass with silicon
structural sealant and weather proofing using weather proofing sealant(
Dow corning and waker make) silicon joint visible from outside. The
insulated glass made of two parts first 6mm thick toughened SGG
Reflectasol Green or equivalent with coating inside and light
transmission-26%, Solar factor-0.36,RHG-320w/M2 and second 5mm
thick clear float glass separated by spacers to create 12 mm dehydrated
air space and hermetically sealed by using double sealed organic sealant
(priming sealant of thermoplastic, solvent free polyisubutylene which is
applied on both the sides of spacer, secondary sealant comprising of
two component of polysulphide in the right proportion for final outer
seal i/c perforated channel for air spaces. The reflective type Glass and
clear glass should be of make M/s Saint-Gobain Glass or equivalent.
F.10
F.11
F.12
F.12.1
F.13
F.14
F.15
F.16
F.17
F.18
F.18.1
F.18.2
F.19.1
Providing and applying structural silicon of approved make in structural
glazing of MPH, etc. as per the instruction of the Engineer-In-Charge
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0
mm thick & 2100 mm long with SS screws etc. .complete as per
direction of Engineer-in-Charge.
Powder coated minimum thickness 50 micron aluminium tubular handle
bar.
Providing & Fixing SS Door Handle 500mm long
Providing & Fixing SS Tower bolt 300x10mm
Providing & Fixing SS door stopper
Providing & fixing Dead Door lock with cylinder
Providing and fixing 12 mm thick frameless toughened glass door
shutter of approved brand and manufacture, including providing and
fixing top & bottom pivot & spring type fixing arrangement and making
necessary holes etc. for fixing required door fittings, all complete as per
direction of Engineer-in-charge (Door handle, lock and stopper etc.to be
paid separately).
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. complete as per the architectural drawings
and the directions of engineer-in-charge . (Cost of aluminium snap
beading/PVC/neoprene felt/ gasket shall be paid in basic item):
With glass panes of 4 mm thickness
With glass panes of 5 mm thickness
Suplly & fixing 12.5 mm thick Gypsum board for repairing existing
false ceiling with all necessary materials and labour complete as per
direction of EIC.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
5
Sqm.
4,845.00
24,225.00
5
Sqm.
3,381.90
16,909.50
15
Rm
143.00
2,145.00
2
Each
507.90
1,015.80
5
5
5
5
Each
Each
Each
Each
2,109.37
282.33
266.58
3,108.98
10,546.85
1,411.65
1,332.90
15,544.90
10
Sqm.
4,692.70
46,927.00
10
10
Sqm.
Sqm.
790.00
1,009.00
7,900.00
10,090.00
10
Sqm..
720.00
7,200.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from M.S.
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm
wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm
centre to centre, one flange fixed to the ceiling with dash fastener 12.5
mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to
the angle hangers of 25x10x0.50 mm of required length with nuts &
bolts of required size and other end of angle hanger fixed with
intermediate G.I. channels 45x15x0.9 mm running at the spacing of
1200 mm centre to centre, to which the ceiling section 0.5 mm thick
bottom wedge of 80 mm with tapered flangesof 26 mm each having lips
of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction
perpendicular to G.I. intermediate channel with connecting clips made
out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including
fixing perimeter channels 0.5 mm thick 27 mm high having flanges of
20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs at
450 mm centre, with 25mm long dry wall screws @ 230 mm interval,
including fixing of gypsum board to ceiling section and perimeter
channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm
c/c, including jointing and finishing to a flush finish of tapered and
square edges of the board with recommended jointing compound ,
jointing tapes , finishing with jointing compound in 3 layers covering
upto 150 mm on both sides of joint and two coats of primer suitable for
board, all as per manufacturer's specification and also including the cost
of making openings for light fittings, grills, diffusers, cutouts made with
frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the
cost of painting with :
F.19.2.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095Part I
Providing and fixing/repairing acoustical tiles ceiling of approved
F.20
quality on exposed face fixed to a grid made out of anodised aluminium
(with 15 micron anodic coating ) T-section 35 x15x1.5 mm size main
runners and corss runners 23.5x19x1.5 mm fixed to main runners of
armstrong make or equivalent (The tiles should have Humidity
Resistance (RH) of 95%, NRC 0.90, Light Reflectance >88%, Thermal
Conductivity k = 0.032 w/m K, Colour White & black, Fire
Performance Class 0/ Class 1 (BS476 Class 6&7) in module size of 600
X 1200 X 15 mm, suitable for Green Building application, with
Recycled content of 88% (FG). )
Providing and fixing/repairing Armstrong ‘Wood Works Acoustical
F.21
Wall Paneling’ RH90 with grooved wall panels made of wood fibres
and surface treated to resist fire (UK Class 1; BS476), 16mm thick of
size 2440mmx128 mm OR 600mmx1200mm providing a minimum
sound absorption level of 0.70 NRC with acoustical fleece and 50mm
Glass fibre quilt of density 32kg/mt3 to be affixed to wall at all height
using Steel framework as per the instructions laid down by the
manufacturer.
Providing and fixing/repairing Armstrong ‘Optra Acoustical Wall
F.22
Panelling’ with square edges made of fibre glass substrate 25mm thick
and wrapped on the front side with an acoustically transparent and fireresistant fabric with an option of colours as per the choice of the
Architect/ Project Engineer of size 2100x600 or 600x600 mm providing
a minimum sound absorption level of 0.90 NRC to be affixed to wall at
all height using Wall panel impalers supplied by M/s Armstrong
Industries India Pvt. Ltd and construction adhesives as per the
instructions laid down by the manufacturer, complete as per direction of
EIC.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
20
Sqm..
804.80
16,096.00
10
Sqm.
2,500.00
25,000.00
10
Sqm.
3,500.00
35,000.00
10
Sqm.
3,500.00
35,000.00
F.19.2
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
F.23
Providing and Fixing Aluminium False Ceiling system of TRAC 84C
or equivalent comprising of 84mm x 12.5mm deep panels with 23.9mm
flange roll formed out of 0.5mm thick Alloy AA 3105/3005/5050
chromatised and stove enamelled (coil coated) on the both sides in
manufacturer’s standard colour shades (colour and shade as approved
by GAIL). Panels shall be fixed on to roll formed carriers 32mm wide x
39mm deep out of 0.6mm galvanised steel with cut-outs to hold the
panels in a module of 100mm at max. 1.6RM c/c. Carriers to be
suspended from roof / truss by 4mm dia galvanised steel wire rod
hangers with special height adjustment suspension clips at max. 1.3m
c/c. Hangers fixed to roof by ‘J’ hooks and nylon inserts or to truss
members by regular industrial grade 18G GI wire. Panels shall be
factory cut in lengths upto max. 5m to suit site dimensions / shop
drawings. Edge profile / wall angle/partition/structural ceiling to be
19x19x0.5mm thick of Aluminium matching the colour of panel.
The work shall include fixing of Light Fittings, Air-conditioning
Diffusers, Fire alarm (Light Fittings, Air-conditioning Diffusers, Fire
alarm to be paid separately) including making suitable Cutouts for the
same as required as per site condition all complete as per instruction and
direction of Engineer In Charge.
Providing and fixing FABRIC FLORIDA Vinyl coated fibber glass
rolling blinds of 0.35 mm thick of approved colour & width 18003000mm with roller tube of extruded aluminium alloy 38mm O.D a
minimum wall thickness of 1.00 mm duly anodized with clutch
mechanism & endler of high strength fiberglass reinforced polyester,
with brackets of atomized steel power coated, bottom weight with
aluminium tube powder coated in color matching to the fabric complete
as per direction of EIC. All complete including cost of all material,
labour, fixing properly at site of MAC or equivalent make.
Providing & fixing head rail for vertical blind etc. complete (Vista /
Mac or equivalent) complete with all necessary accessories.
Providing & fixing vertical strip 100 mm breadth & upto max. 2.1m
length for repairing existing vertical blinds of approved fabric louvers
blinds of high quality material weave and finish fabric with resistance
to abrasion including chail, balalnce weight, etc. complete (Vista / Mac
or equivalent) complete with all necessary accessories.
Repair & Servicing of all sizes of aluminium door including floor
springs etc.for smooth operation of door, complete with all labour
(replacement of spares if required to be paid separately).
Providing and fixing anodised /powder coated aluminium grill (anodised
transparent or dyed to required shade according to IS: 1868 with
minimum anodic coating of grade AC 15) of approved design/pattern,
with approved standard section and fixed to the existing window frame
with C.P. brass/ stainless steel screws @ 200mm centre to centre,
including cutting the grill to proper opening size for fixing and operation
of handles and fixing approved anodised aluminium standard section
around the opening, all complete as per requirement and direction of
Engineer-in-charge. (Only weight of grill to be measured for payment).
F.24
F.25
F.26
F.27
F.28
F.29
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
10
Sqm..
1,100.00
11,000.00
30
Sqm..
2,015.20
60,456.00
25
RM
330.00
8,250.00
10
Each
100.00
1,000.00
25
Each
220.00
5,500.00
50
KG
398.45
19,922.50
5
5
RM
RM
199.55
187.95
997.75
939.75
Providing and fixing factory made UPVC door frame made of UPVC
extruded section having an overall dimension as below (tolerance +
1mm) with wall thickness 2.0mm + 0.2mm, corners of the door trame
to be mitred and welded of plastic, galvanized brackets and stainless
steel screws. The hinge side vertical of the frame reinforced by
galvanized M.S tube of size 19x19mm and 1m + 0.1 mm wall
thickness and 3 nos. stainless steel hinges fixed to the frame
complete as per manufactures specification and direction of Engineerin-charge.
F.29.1
F.29.2
F.30
Extruded section profile size 48x40 mm.
Extruded section profile size 42x50 mm.
Providing and fixing to existing door frames.
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
F.30.1
24mm thick factory made PVC door shutters made of styles and rails of
a UPVC hollow section of size 59x24 mm and wall thickness 2 mm
+0.2 mm with inbuilt edging on both sides. The style and rails metred
and joined at the corners by means of M.S galvanised/plastic brackets
of size 75x220 mm having wall thickness 1.0 mm and stainless steel
screws. The style of the shutter reinforced by inserting galvanised M.S
tube of size 20x20 mm and 1 mm + 0.1 mm wall thickness. The lock
rail made up of 'H' section, a UPVC hollow section of size 100X24mm
and 2mm + 0.2 mm wall thickness fixed to the shutter style by means
of plastic/galvanised M.S. 'U' sleats. the shutter frame filed with a
UPVC multi-chambered single panel of size not less than 620 mm,
having overall thickness of 20 mm and 1 mm + 0.1 mm wall thickness.
The panels filled vertically and tie bar at two places by inserting
horizontally 6 mm galvanised M.S rod and fastened with with nuts and
washers, complete as per manufacture's specification and direction of
Engineer-in-charge. (For W.C and bathroom door shutter.)
F.30.2
F.31.1
F.31.2
Unit
Unit Rate (Rs.)
Amount (Rs.)
5
Sqm.
2,645.70
13,228.50
5
Sqm.
2,761.85
13,809.25
10
10
KG
KG
103.15
110.95
1,031.50
1,109.50
30mm thick factory made Polyvinyl Chloride (PVC) door shutters made
of styles and rails of a UPVC hollow section of size 60x30 mm and wall
thickness 2 mm +0.2 mm with inbuilt decorative moulding edging on
one sides. The style and rails metred and joined at the corners by
means of M.S galvanised/plastic brackets of size 75x220 mm having
wall thickness 1.0 mm and stainless steel screws. The style of the
shutter reinforced by inserting galvanised M.S tube of size 25x20 mm
and 1 mm + 0.1 mm wall thickness. The lock rail made up of 'H'
section, a UPVC hollow section of size 100X30mm and 2mm + 0.2
mm wall thickness fixed to the shutter style by means of
plastic/galvanised M.S. 'U' cleats. the shutter frame filed with a UPVC
multi-chambered single panel of size not less than 620 mm, having
overall thickness of 20 mm and 1 mm + 0.1 mm wall thickness. The
panels filled vertically and tie bar at two places by inserting horizontally
6 mm galvanised M.S rod and fastened with with nuts and washers,
complete as per manufacture's specification and direction of Engineerin-charge.
F.31
Quantity
Providing and fixing M.S. grills of required pattern in frames of
windows etc. with M.S. flats, square or round bars etc. including
priming coat with approved steel primer all complete
Fixed to steel windows by welding.
Fixed to openings /wooden frames with rawl plugs screws etc.
25,49,259.85
Total Part -F
G.1
G.2
G.3
G.4
G.4.1
SUB HEAD- G: SANITARY, DRAINAGE & WATER SUPPLY
WORK ETC.
Providing & fixing hand pump ( India Marka-II" medium duty ) by
boring of dia 150mm dia upto required depth, lowering casing pipe,
filling gravels, including the cost of casing pipe of 110mm dia PVC pipe
- 6kg/cm2 -50 mt length, GI pipe with fittings - 40mm dia -35mt length,
gravel, boring charges, installation, making cavity, well development for
12 hrs., clamping, bore cap, transportation, labor charges, etc. complete
in all respect as per satisfaction of EIC.
Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/bore
log, including hire & running charges of all equipments, tools, plants &
machineries required for the job, all complete as per direction of
Engineer –in-charge, rate is applicable upto 90 metre depth below
ground level - 300mm dia
Providing and placing in position filters of 25 mm diameter G.I. pipe
with brass strainer of approved quality.
Providing & laying perforated PVC pipe 100 -150 mm dia UV resistant
& ISI approved
100mm - 150 mm diameter
1
Each
40,000.00
40,000.00
100
RM
358.90
35,890.00
2
RM
582.65
1,165.30
100
RM
319.00
31,900.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
G.5
Supplying & filling the river pebbles (p-gravel) of size of 6-12 mm size
in to the bore.
Providing and fixing on wall face un plasticised- Rigid PVC rain water
pipes conforming to Is: 13592 Type A including jointing with seal ring
conforming to IS 5382 leaving 10mm gap for thermal expansion.
Single socketed pipes
75mm diameter
100/110 mm diameter
150 mm diameter
Cleaning of the sewer manholes of all depths in GAIL PATA including
disposal of the slush/rubbish to the dumping area in inside GAIL depth
upto 5.50 MTR
Cleaning of sewer line of all dia. between two manholes / manhole /
chamber and at all depths including disposal of removed rubbish within
GAILGAON as directed by EIC.
Making connection of G.I. distribution branch with G.I. main of
following sizes by providing and fixing tee, including cutting and
threading the pipe etc. complete
25 to 40mm nominal bore
50 to 80mm nominal bore
Providing & Fixing of CPVC Gate valve 50mm dia. With approved
quality
Providing & Fixing of CPVC Gate valve 40mm dia. With approved
quality
Providing & Fixing of CPVC Gate valve 25mm dia. With approved
quality
Providing & Fixing of Pillar cock self closing system (Hindware) With
approved quality
Providing and fixing wall mounted WC of approved make including
concealed cistern, seat covers, etc. complete ( Hindware or equivalent)
as per the approved design and make as per existing provided in MPH(
Auditorium).
Supply of following materials of approved brand & manufacturer at site
as per instructions of EIC.
Providing of Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain
& brass threaded fittings including fixing the pipe with clamps at 1.00
m spacing/ the cost of cutting chases and making good the
same/trenching ,refilling including testing of joints complete. This
includes jointing of pipes & fittings with one step CPVC solvent cement
and testing of joints complete as per direction of Engineer in Charge for
external/concealed work/Internal work.
Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia.
white/ Ivory vitreous china ware wash basin
Flat back of size of 550x400 mm
Flat back of size of 630x450 mm
Flat back of size of 600x480 mm
White/ Ivory- oval shape wash basin of size about 560x410mm ( counter
sunk/ counter top)
kitchen sink.- White glazed fire clay sink size 600x450x250mm
Stainless steel kitchen sink with CI bracket of sink size 610x460 bowl
depth 200 mm without drain board
G.6
G.6.1
G.6.2
G.6.3
G.7
G.8
G.9
G.9.1
G.9.2
G.10
G.11
G.12
G.13
G.14
G.15
G.15.1
G.15.1.1
G.15.1.2
G.15.1.3
G.15.1.4
G.15.1.5
G.15.1.6
G.15.2
G.15.2.1
G.15.2.2
G.15.2.3
G.15.3
G.15.4
G.15.5
G.15.6
Stainless steel kitchen sink with CI bracket of sink size 470 X 420 mm
OR 535x460 bowl depth 178mm without drain board
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
5
Cum
750.00
3,750.00
50
50
25
RM
RM
RM
134.50
218.60
300.61
6,725.00
10,930.00
7,515.25
20
Each
1,138.50
22,770.00
20
Each
330.00
6,600.00
2
2
Each
Each
338.90
721.95
677.80
1,443.90
2
Each
1,898.41
3,796.82
2
Each
1,160.27
2,320.54
2
Each
435.18
870.36
2
Each
1,371.26
2,742.52
2
Each
9,000.00
18,000.00
10
50
50
10
10
10
RM
RM
RM
RM
RM
RM
55.00
68.00
95.00
130.00
185.00
300.00
550.00
3,400.00
4,750.00
1,300.00
1,850.00
3,000.00
50
5
5
Each
Each
Each
550.00
725.00
725.00
27,500.00
3,625.00
3,625.00
3
Each
1,375.00
4,125.00
5
Each
1,350.00
6,750.00
2
Each
2,845.00
5,690.00
5
Each
2,120.00
10,600.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
G.15.7
Description of Item
Stainless steel kitchen sink with CI brackets of sink size of 510x1040
mm bowl depth 178 mm with drain board.
White china vitreous division plate Partitions for urinals of about
690x325mm
G.15.9 White china vitrious flat back urinal of about 590x390x375 mm
G.15.10 White vitreous china pedestal type (European type /wash down type)
water closet pan
G.15.8
G.15.11 White vitreous china water closet squatting pan (India type)Orissa
pattern WC pan of 580x440 mm
G.15.12 White 10 lit. low level PVC cistern with complete fittings of approved
make with PVC flushing pipe band complete.
G.15.13 Fitting for cistern like syphon, washer etc.
G.15.14 Plastic seat with lid of approved quality for EWC pan with hinges
rubber buffers etc. complete.
G.15.14.1 Plastic seat with lid of required colour.
G.15.15
G.15.16
G.15.17
G.15.18
G.15.19
G.15.20
G.15.21
G.15.22
G.15.23
G.15.24
G.15.25
G.15.26
Angle valve / pillar cock -15mm dia
CP Concealed valves 15mm dia
C. P. brass Bottle trap with washer complete
Wall mixer/ wash basin mixer - 15mm dia
C.P. brass mixer with diverter - 15mm dia
CP brass toilet paper holder as per existing size
CP brass towel rod with bracket of approved make complete of size
600x20mm
PVC connection pipe 450/600 mm long with CP brass unions
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with
length not less than 700 mm i/c PVC waste fittings
CP copper pipe with nut for geyser, wash basin, W.C, etc. up to 600mm
long with CP brass unions
CP brass shower rose of up to 100 mm dia of approved brand
600x120x5 mm glass shelf with edges rounded off supported on
anodized angle fame and guard rail complete.
G.15.27 CP brass soap dish
G.15.28 CP brass waste of approved quality for sink wash basin with coupling
complete 32-40mm
G.15.29 GI fittings like elbow, Nipple up to 200 long, Socket, reducessor etc.
G.15.29.1 15mm to 25 mm dia
G.15.29.2 32mm to 50mm dia
G.15.30 GI union 15 to 25mm of approved quality.
G.15.31 GI union 32 to 50mm of approved quality.
G.15.32 G.I. Pipes complete with G.I. fittings and clamps
G.15.32.1 15mm Nominal bore
G.15.32.2 20mm Nominal bore
G.15.32.3 25mm Nominal bore
G.15.32.4 32mm nominal bore
G.15.32.5 40mm Nominal bore
G.15.32.6 50mm Nominal bore
G.15.33 Gun metal gate valve with C.I. wheel (Screwed end)
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
5
Each
3,000.00
15,000.00
5
Each
825.00
4,125.00
10
Each
1,600.00
16,000.00
50
Each
700.00
35,000.00
50
Each
450.00
22,500.00
50
Each
530.00
26,500.00
150
Each
151.80
22,770.00
150
Each
330.00
49,500.00
500
5
100
25
2
10
Each
Each
Each
Each
Each
Each
275.00
934.91
360.00
976.00
976.00
225.00
1,37,500.00
4,674.55
36,000.00
24,400.00
1,952.00
2,250.00
100
Each
500.00
50,000.00
500
Each
35.20
17,600.00
300
Each
30.00
9,000.00
250
Each
55.00
13,750.00
100
Each
50.00
5,000.00
150
Each
250.00
37,500.00
100
Each
63.25
6,325.00
150
Each
80.00
12,000.00
1000
Each
15.18
15,180.00
50
Each
31.63
1,581.25
50
Each
75.00
3,750.00
10
Each
138.33
1,383.30
150
RM
105.00
15,750.00
50
RM
125.00
6,250.00
50
RM
160.00
8,000.00
50
RM
180.00
9,000.00
25
RM
220.00
5,500.00
5
RM
275.00
1,375.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
G.15.33.1 25mm nominal bore
G.15.33.2 32mm nominal bore
G.15.33.3 40 mm nominal bore
G.15.33.4 50mm nominal bore
G.15.34 Ball valve (brass) with High or low pressure with plastic floats
G.15.34.1 20mm nominal bore
G.15.34.2 25 mm nominal bore
G.15.35 Brass ferrule with C.I. mouth cover including boring and tapping the
main
G.15.35.1 15mm nominal bore
G.15.35.2 20mm nominal bore
G.15.35.3 25mm nominal bore
G.15.36 Polyethylene water storage tank ISI: 12701 with cover and suitable
locking arrangement
G.15.37 Surgeon type wash basin of size 660x460 mm
G.15.38 15mm CP brass pillar tap with elbow operative lever.
G.15.39 PVC float valve set with plastic float and rod etc. For PVC cisterns
G.15.40 UPVC trap with extension piece of required length
G.15.41
G.15.42
G.15.43
G.15.44
G.15.45
G.15.46
G.15.47
G.15.48
G.15.49
G.15.49.1
Cistern washer (tortoise)
Brass face for bib cocks
PVC flushing pipe for cistern
PVC Cistern knob / handle with or without lever of required size and
shape
M-Seal
100 ML Acid in bottle along with cleaning materials like clothes, brush
etc.
PVC Clamps with necessary screws etc. for up to 100mm dia pipe
PVC bends/shoe/ collar/ cap/ Tee/ cowl etc.. for up to 100mm dia pipe
with necessary screws & or adhesives wherever required
Heavy duty gun metal gate valve with CI wheel
15 mm dia
G.15.49.2 20mm dia
G.15.49.3 25mm dia
G.15.50 PTMT (An Engineering thermoplastic) grating Circular type Up to 150
mm nominal dia, domed shape
G.15.51 Stainless steel circular grating of approved quality of size upto 150 mm
dia for floor traps
G.15.52 15mm nominal size short/ long body bib cock
G.15.53 CP brass Health facet set with pipe
G.15.54 CP brass kitchen sink mixture
G.15.55 Automatic syphon system set for urinal cistern
G.15.56 Flush pipe for auto cistern
G.15.57 Supplying pig lead at site of work.
G.15.58 Flush pipe with union spreaders and clamps all in C.P. brass for single
stall
G.15.59 Flush pipe with union spreaders and clamps all in C.P. brass for double
stall
G.15.60 Flush pipe with union spreaders and clamps all in C.P. brass for range of
three stall
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
5
Each
449.10
2,245.49
5
Each
563.13
2,815.67
5
Each
627.63
3,138.14
5
Each
909.51
4,547.57
2
Each
210.00
420.00
2
Each
305.00
610.00
2
Each
140.00
280.00
2
Each
160.00
320.00
2
Each
220.00
440.00
4.50
2,250.00
1,100.00
550.00
2,200.00
2,750.00
2
5
Per litre
capacity
Each
Each
175
Each
110.00
19,250.00
20
Each
101.20
2,024.00
200
500
50
Each
Each
Each
55.00
44.00
49.50
11,000.00
22,000.00
2,475.00
100
Each
33.00
3,300.00
50
KG
388.30
19,415.00
200
Each
278.30
55,660.00
15
Each
14.58
218.63
100
Each
66.00
6,600.00
2
Each
210.00
420.00
2
Each
280.00
560.00
2
Each
350.00
700.00
2
Each
35.00
70.00
150
Each
27.50
4,125.00
300
10
10
10
10
100
Each
Each
Each
Each
Each
KG
100.00
550.00
1,540.00
110.00
275.00
104.64
30,000.00
5,500.00
15,400.00
1,100.00
2,750.00
10,464.00
10
Each
270.00
2,700.00
10
Each
400.00
4,000.00
10
Each
520.00
5,200.00
500
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
G.15.61 white vitreous china auto cistern of 10 lt capacity with complete fittings
and with bracket etc. complete.
G.15.62 Decorative CP brass toilet fixtures of Jaquare make or equivalent
G.15.62.1 Wall mixture (Cat. No.-7219)
G.15.62.2 Basin mixture (Cat. No.-7167)
G.15.62.3 Wall mixture three in one with provision of ( hand shower & over head
shower) (Cat. No.-7281)
G.15.62.4 Angle valve (Cat. No.-7053)
G.15.62.5 Bib cock (Cat. No.-7037)
G.15.62.6 Hand shower (telephonic) with pipe & stand (Cat. No.-7537)
G.15.62.7 Over head shower (Cat. No.-7489)
G.15.62.8 Urinal valve auto closing system with pipe (Cat. No.077)
G.15.63 Decorative toilet fixtures-Queen's collection of Jaguar or equivalent.
G.15.63.1 Glass shelf (Cat. No.-7771)
G.15.63.2 Towel rack (Cat. No.-7781)
G.15.63.3 Toilet paper holder (Cat. No.-7751)
G.15.63.4 Towel ring (Cat. No.-7721)
G.15.63.5 Soap dish (Cat. No.-7733)
G.15.63.6 Tumbler holder (Cat. No.-7741)
G.15.64 Decorative sanitary china vitreous fixtures of Hindware or equivalent.
G.15.64.1 EWC with seat cover (Cat. No.-20024)
G.15.64.2 Vitreous china pedestal for wash basin
G.15.64.3 Cistern with fittings (Cat. No.-20024)
G.15.64.4 EWC sheet cover (Cat. No.-20024)
G.15.65 C.I. cover with / without frame for manhole chamber.
G.15.65.1 455x610mm (approx.) rectangular C.I. cover (light duty) the weight of
the cover to be not less than 23 kg.
G.15.65.2 500mm (approx.) diameter C.I. cover (medium duty) the weight of the
cover to be not less than 58kg.
G.15.65.3 300 X 300 MM size C.I.Cover for gully trap etc. with frame
G.15.65.4 300 X 300 MM size C.I.Cover without frame
G.15.66 Precast R.C.C. manhole cover and frame of required shape (KK
Manhole & Gratings Co. Pvt. Ltd. or equivalent).
G.15.66.1 Rectangular shape 600x450mm with or without hole.
G.15.66.2 Rectangular shape cover without frame about 600x450
G.15.67 Pipe repair kit of LOCTITE or equivalent as directed by EIC (2inch X 6
feet size).
G.15.68 Pipe repair kit of LOCTITE or equivalent as directed by EIC (4inch X
12 feet size).
G.15.69 Metal magic stick of LOCTITE or equivalent as directed by EIC( about
113 gms).
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
10
Each
1,600.00
16,000.00
5
Each
2,667.50
13,337.50
5
Each
2,992.00
14,960.00
5
Each
3,657.50
18,287.50
5
Each
1,050.50
5,252.50
5
Each
1,089.00
5,445.00
5
Each
1,980.00
9,900.00
5
Each
1,474.00
7,370.00
5
Each
1,485.00
7,425.00
2
Each
1,705.00
3,410.00
5
Each
2,530.00
12,650.00
5
Each
819.50
4,097.50
5
Each
764.50
3,822.50
5
Each
874.50
4,372.50
5
Each
850.30
4,251.50
2
Each
1,430.00
2,860.00
2
Each
650.00
1,300.00
2
Each
2,200.00
4,400.00
5
Each
825.00
4,125.00
5
Each
373.62
1,868.08
5
Each
849.09
4,245.45
10
Each
416.85
4,168.45
10
Each
267.41
2,674.10
10
Each
769.07
7,690.65
25
Each
550.00
13,750.00
5
Each
4,730.00
23,650.00
5
Each
6,820.00
34,100.00
10
Each
1,023.00
10,230.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
G.15.70 Fast set steel putty of LOCTITE or equivalent as directed by EIC (about
500 gms. Kit).
G.15.71 Under water repair putty of LOCTITE or equivalent as directed by EIC
(about 113 gms ).
G.15.72 Concrete repair epoxy of LOCKTITE of about 113 gms. or equivalent as
approved (application as per manufacture's recommendation) for
repairing of concrete surface etc. as per site requirement and as directed
by EIC.
G.15.73 Anti slip coating of LOCKTITE or equivalent as approved (application
as per manufacture's recommendation) on any surface as per site
requirement and as directed by EIC.
G.15.74 Water closet squatting pan (Indian type W.C. pan)with 100mm sand
cast lron P or S trap, litre low level white P.V.C. flushing cistern with
manually controlled device (handle lever) confirming to IS : 7231, with
all fittings and fixtures complete
G.15.74.1 White Vitreous china Orissa pattern W.C. pan of size 580x440xmm
with integral type foot rests.
G.15.75 White vitreous china pedestal water closet squatting pan (European type
W.C. pan) with 10, litre low level white P.V.C. flushing cistern with
manually controlled device (handle lever) confirming to IS : 7231
G.15.75.1 W.C. pan with ISI marked white solid plastic sheet and lid.
G.15.75.2 W.C. pan with ISI marked white solid plastic sheet and lid.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
5
Each
3,503.50
17,517.50
5
Each
1,287.00
6,435.00
10
Packet
951.50
9,515.00
2
Ltr.
6,380.00
12,760.00
2
Each
3,625.22
7,250.43
2
Each
3,385.89
6,771.78
2
Each
3,340.18
6,680.37
2
Each
5,164.08
10,328.16
2
Each
5,118.47
10,236.93
10
Each
5,802.50
58,025.00
10
Each
5,390.00
53,900.00
100
KG
54.50
5,450.00
G.15.76 White vitreous china pedestal type water closet squatting pan (European
type W.C. pan)with sheet and lid ,10, litre low level white vitreous
china flushing cistern & C.P. bend with fittings & C.I. brackets, 40mm
flush bend , overflow arrangement with specials standard make and
mosquito proof coupling of approved municipal design complete
G.15.76.1 W.C. pan with ISI marked white solid plastic sheet and lid.
G.15.76.2 W.C. pan with ISI marked white solid plastic sheet and lid.
G.15.77 CP single lever basin mixer with popup with braided hoses. Jaquar item
no - KUB 35051 B
G.15.78 CP high flow single lever bath & shower mixer (concealed body with
button spout) composite one piece body VGN- 27137
G.15.79 Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead
jointing up to 300mm dia
15,88,440.46
Total Part -G
SUB HEAD -H : ROAD WORK, PATHWAYS, etc.
H.1
Scarifying WBM road surface including consolidation of the aggregate
received from scarifying with power road roller of 8 to 10 tonne
capacity including disposal of rubbish with in township will all lead &
lift as directed by EIC.
H.2
Supply and stacking of graded stone aggregate 90mm to 45 mm at site.
H.3
Supplying and stacking of graded stone aggregate 63mm to 45 mm at
site.
Supply and stacking 53 mm to 22.4 mm size stone aggregate.
Supply and stacking of mooram at site.
Supply and stacking of stone chippings at site 13.2mm/11.2 mm
Laying water bound macadam with stone aggregate, stone chippings and
blinding material including screening , sorting, spreading to template
and consolidation with road roller ( Payment for stone aggregate,
chippings, mooram etc.will be paid separately)
H.4
H.5
H.6
H.7
100
Sqm.
12.60
1,260.00
25
Cum
1,121.90
28,047.50
50
Cum
1,272.90
63,645.00
50
50
50
Cum
Cum
Cum
1,296.15
646.55
1,432.00
64,807.50
32,327.50
71,600.00
200
Cum
388.85
77,770.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
H.8
H.8.1
H.8.2
H.9
H.9.1
H.9.2
H.9.3
H.9.4
H.9.5
H.9.6
H.10
Description of Item
a) On WBM surface @ 0.75kg/ M2.
b) On bituminous surface @ 0.50kg/ M2.
P/L non pressure NP3 class (Meadium duly) RCC pipes with collars
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
cement : 2fine sand) including testing of joints etc. complete.
100 mm dia
150mm dia
250 mm dia
300 mm dia
450 mm dia
600 mm dia
Supply & fixing Reflective sign plate made out of 2mm thick
Aluminium sheet, faces to be covered with non Reflective sheeting
H.13
H.14
H.14.1
H.15
H.15.1
Unit Rate (Rs.)
Amount (Rs.)
100
50
Sqm.
Sqm.
43.65
31.75
4,365.00
1,587.50
10
10
20
50
10
15
RM
RM
RM
RM
RM
RM
423.36
635.05
1,058.41
1,270.10
1,905.15
2,490.15
4,233.60
6,350.50
21,168.20
63,505.00
19,051.50
37,352.25
5
Sqm.
2,860.00
14,300.00
10
Sqm.
4,400.00
44,000.00
10
Each
377.08
3,770.80
50
Sqm.
505.80
25,290.00
50
Cum
6,788.15
3,39,407.50
50
Sqm.
179.50
8,975.00
Supply & fixing Reflective sign plate made out of 2mm thick
Aluminium sheet, faces (back ground) and the matter & GAIL logo with
Engineering Grade Reflective sheeting after the etching treatment of
Aluminium sheeting. The backside of sheeting should be covered with
two coats of epoxy coating. This plate is to be fixed on a frame of
angle iron 40mmX40mmX3mm with help of stainless nut
bolts/Aluminium rivets. Comp, in all respects and at all height.
H.12
Unit
Providing and applying tack coating using hot straight run bitumen of
grade 80/100 including heating the bitumen, spraying the bitumen with
mechanically operated spray unit fitted on bitumen boiler or as directed
by EIC, cleaning and preparing the existing road surface as per
specifications.
and the matter & GAIL logo with Engineering Grade Reflective
sheeting after the etching treatment of Aluminium sheeting. The
backside of sheeting should be covered with two coats of epoxy
coating. This plate is to be fixed on a frame of angle iron
40mmX40mmX3mm with help of stainless nut bolts/Aluminium rivets.
Comp, in all respects and at all height.
H.11
Quantity
Providing and fixing Cat's Eye (glow studs) heavy duty integral stem,
reflective, aluminium die cast with elegant finish of size 100x100mm
and 20mm high having a stem of 50mm (or12mm dia. 90mm long)
screwed and nailed to fix into the road surface or at the nosing of the
central verge. The road studs should have reflectors fitted on one side of
the studs (3 Nos. 7 element of 1 No., 29 element reflector) complete as
per direction of EIC.
Providing and applying 2.5 mm thick road marking strip (retroreflective) of specified shade / colour using hot thermoplastic material
by fully / semi automatic thermoplastic paint applicator machine fitted
with profile shoe, glass beads dispenser, propane tank heater and profile
shoe heater, driven by experienced operator on road surface including
cost of material, labour T&P, cleaning the road surface of all dirt, seals,
oil, grease and material etc. complete as per direction of Engineere-InCharge and accordance with applicable specification.
Providing and laying bituminous macadam using crushed stone
aggregates of specified grading premixed with bituminous binder,
prepared in Hot Mix Plant, transported to site, laid over previously
prepared surface with paver finisher to the required level and grade and
alignment and rolled, as per of MOSRTH specification to achieve the
desired compaction.
50 mm average compacted thickness
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone
chippings of 13.2mm and 11.2mm size respectively per 100 M2. and 52
kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm
and 11.2 mm size respectively including a tack coat with hot straight run
bitumen including consolidation with road roller of 6 to 9 tonne capacity
etc. complete. (tack coat to be paid for separately) :
With paving Asphalt grade VG - 10 heated and then mixed with solvent
at the rate of 70 grams per kg of asphalt.
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
H.16
Providing and laying seal coat of premixed fine aggregate ( passing 2.36
mm and retained on 180 micron sieve) with bitumen using 128 kg of
bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60
cum of fine aggregate per 100 M2 of road surface including rolling and
finishing with road roller all complete.
Supply of marble dust
Stone dust
Providing and laying 25 MM thick semi-dense bituminous concrete
using bituminous binder @ 4.5 to 05 % of mix and filler as per clause
508 of MOSRTH specification including preparation of surface, hot
mixed in hot mix plant and hot laid with mechanical paver finisher to
required grade, level and alignment, rolling with smooth wheeled
vibratory and tandem rollers to achieve desired compaction, complete in
all respect.
Construction of granular sub-base by providing close graded Material
conforming to specifications, mixing in a mechanical mix plant at
OMC, carriage of mixed material by tippers to work site, for all leads &
lifts, spreading in uniform layers of specified thickness with motor
grader on prepared surface and compacting with vibratory power roller
to achieve the desired density, complete as per specifications and
directions of Engineer-in-Charge
With material conforming to Grade-III (size range 26.5 mm to 0.075
mm ) having CBR Value-20
Providing built up spray grout as per clause 506 of MORTH (formerly
MOST) specification for patch repairs work only including primer coat
and tack coat (Number of layers of course, aggregate shall be as per site
requirement)
Providing and filling in position bitumen mix filler of proportion 80Kg
of hot bitumen, 1 Kg or cement and 0.25 cubic metre of coarse sand for
expansion joints.
H.16.1
H.16.2
H.17
H.18
H.18.1
H.19
H.20
H.21
Providing and laying design mix cement concrete in roads, taxi tracks
and runway having a minimum works test beam flexural strength of 300
Kg per M2 at 28 days using not less than 340 Kg of cement per Cum of
finished concrete, coarse sand and graded stone aggregate of 40mm
nominal size in appropriate proportions as per specified design criteria
approved by Engineer-in-charge mechanically vibrated using needle and
surface vibrators including steel form work with sturdy M.S. channel
sections including curing and providing and filling construction joints
and dummy joints with shalijet primer or equivalent including rounding
of the edges and filling the grooved 10x25mm deep at top for
construction joint sealing compound (conforming to IS: 4254) including
making necessary arrangement for expansion joints etc. all complete.(
Mix design to be done in approved lab.)
Following may be noted: 1. Sealing compound / Poly sulphide is
included in the item. 2. Plasticiser if used in the design mix, is included
in the item, nothing extra will be paid. 3. Concrete has to be finished
with vacuum dewatering system, rates of which are inclusive in the item
4. Groove of the size is to be made by diamond cutter machine.
Thickness of the groove may vary from 5 mm to 10 mm but depth will
remain 25 mm. no extra will be paid . 5. Only steel shuttering of good
quality will be used , which will be paid separately.
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
50
Sqm.
65.80
3,290.00
5
10
Cum
Cum
1,000.00
1,000.00
5,000.00
10,000.00
2000
Sqm.
234.62
4,69,240.00
15
Cum
2,029.50
30,442.50
50
Cum
4,358.56
2,17,928.00
50
Per cm
depth per
cm width
per 100 mtr
186.10
9,305.00
25
cum
6,126.85
1,53,171.25
18,31,191.10
Total Part -H
SUB HEAD-I : SERVICES ETC.
I.1
Services for attending repair & maintenance jobs by deputing adequate
manpower as per direction of EIC.
The carpentry services by deputing ( 1 carpenter + 1 helper ) alongwith
tools and tackles with small consumable material.
The broadly scope of activities shall be as under:
144
PER
MONTH
13,608.00
19,59,552.00
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
96
PER
MONTH
13,608.00
13,06,368.00
48
PER
MONTH
6,281.00
3,01,488.00
96
PER
MONTH
13,608.00
13,06,368.00
284.59
243.94
1,42,295.00
6,09,850.00
13,608.00
4,08,240.00
Refixing of pelmets the existing wall with screws of required plug of
soft wood and using pelmet if required or any other device.
Only taking out and refixing MS/Aluminium/Brass of all types of
hardware fitting such as aldrop , tower bolt, hinges, door stopper ,
handles, hasps and staples , towel rail , soap dish, hooks and eye, name
plates, small wooden board glass selves , cub board knob and locks with
repairing and servicing of hydraulic door closure as directed by EIC.
I.2
I.3
I.4
I.5
I.5.1
I.5.2
I.6
Taking out and refixing of M.S grills /wire mess /glass in window etc.
of any size with new screws /putties etc. as directed by EIC.
Eassying and adjusting door windows and ventilators , cup board
shutters and frames and kitchen cabinet racks etc. as required including
petty repair an replacing the old and missing screws if necessary
complete in all respect.
Any other miscellaneous carpentry /wood work jobs required for day to
day repair & maintenance.
Services for attending repair & maintenance jobs by deputing adequate
manpower as per direction of EIC.
The plumbing services by deputing ( 1 plumber + 1 helper ) alongwith
tools and tackles with small consumable material such as Dhaga,
Safeda, fevicol, washer etc..
The broadly scope of activities shall be as under:
Rewashering/gland packing to the bib cock/stopcock/pillar cock/ball
valves/mixers (for all type of GI fittings) refixing of PVC waste pipe,
arresting leakage in wash basin, sink , cistern , geysers etc. and
removing of air of tanks , including making the same satisfactory for
operation.
services for laying, fixing of pipes and fitting GI/CP/PTMT and all
sanitary fixtures.
Taking out and refixing after performing required repairing and
adjustment of sink, wash basin, urinal, bathroom, tub, (European seat
WC) cistern (low level /high level), including grouting of nut bolt of
geysers/exhaust fan complete.
Any other miscellaneous plumbing jobs required for day to day repair &
maintenance.
Services for attending darin/sewer/chockage /related jobs by deputing
adequate manpower of 1 sweeper alongwith tools and tackles with small
consumable,etc.
The broadly scope of activities shall be as under:
Removing chokage of the trap/waste trap of sink/basin/bath/WC urinal
etc. complete with all operations upto the receiver manhole including the
CI pipe/fittings soil pipes i/c disposing the malba to the dumping
ground.
Any other general cleaning and sweeping works required during day to
day maintenance.
Services for attending repair & maintenance jobs by deputing adequate
manpower as per direction of EIC.
The masonry services by deputing ( 1 mason + 1 helper ) alongwith
tools and tackles.
The broadly scope of activities shall be as under:
Pplaster patch repair jobs, repairing drain, floors,walk ways,
pathways,tiles, making banni, etc.
Any other masonry jobs required during day to day maintenance.
Services of carpentry, plumbing, masonry, welding, painting, helper,
sweeper,labour by deputing manpower for 8 hrs. per day including
necessary tools and tackles.
Services of carpenter/plumber/ mason/welder/painter, etc.
Services of helper/sweeper/labour,etc
Services for attending repair & maintenance jobs by deputing adequate
manpower as per direction of EIC.
The welding related services by deputing ( 1 welder + 1 helper )
alongwith electric welding machine & welding rods & other tools and
tackles, etc.
500
2500
30
Each
Each
PER
MONTH
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
Quantity
Unit
24
PER
MONTH
Unit Rate (Rs.)
Amount (Rs.)
10,404.00
2,49,696.00
The broadly scope of activities shall be as under:
Repairing & refixing of MS gate, grills, door / window frames, hinges,
handle, locking arrangement, manhole covers, etc.
Any other welding related jobs required during day to day maintenance.
I.7
Note:
Services for monitoring the e- complaints, printing job cards, closing the
job cards, assisting GAIL for technical jobs, maintaining records, etc. by
deputing technocal manpower ( having diploma in civil engineering with
computer knowledge) for 8 hrs. per day as per direction of EIC.
1. The contractor shall ensure weekly off considering 26 days
working to the workers deputed under item no- I-1, I-2, I-3, I-4, I-6
& I-7 & quote the rates accordingly.If the worker is worked less
than 26 days in a month, the payment shall be made on prorata
basis.
2. Incase the worker is called on a holiday or weekly off, the
worker should be given weekly off on other day & failing which the
worker should be paid overtime as per provision of the
corresponding act as applicable.
62,83,857.00
Total Part -I
SUB HEAD-J: MISCELLANEOUS WORK,
J.1
J.2
J.3
J.4
J.5
J.6
J.7
J.7.1
J.7.2
J.7.3
J.7.4
J.7.5
J.7.6
J.7.7
J.7.8
J.7.9
J.7.10
J.7.11
J.7.12
J.7.13
J.7.14
J.7.15
J.7.16
J.7.17
J.7.18
J.7.19
J.7.20
J.7.21
J.7.22
Supplying at site 2.25m long pre- cast RCC fencing post as per standard
CPWD specification & direction of EIC.
Supplying at site 3.60m long pre- cast RCC GOOSE NECK fencing
post as per standard CPWD specification & direction of EIC.
Supplying at site 2.0 m long pre- cast RCC fencing post/strut as per
standard CPWD specification & direction of EIC.
Supply of letter box as per existing size and shape at GAIL GAON of
make LiterX or K.K. manhole or equivalent as approved by EIC.
Supply of Fiber Glass Reinforced translucent plastic sheet about 2mm
thick.
Supply of Epoxy Grout
Supplying "Fischer" make or equivalent bolt/ anchor bolt etc. all
complete. All tools and tackles , required for execution of the work like
drill machine, Press Gun etc., are to be arranged by the contractor.
RGM 10 X 130 MM , ITEM NO.: F00J50257
RM 10 , ITEM NO.: F002J50271
RGM 12 X 160 MM , ITEM NO.: F00J50258
RM 12 , ITEM NO.: F002J50272
RGM 16 X 165 MM , ITEM NO.: F00J50287
RM 16 , ITEM NO.: F002J50273
RGM 20 X 260 MM , ITEM NO.: F00J50260
RM 20 , ITEM NO.: F002J50274
RGM 24 X 300 MM , ITEM NO.: F00J50261
RM 24 , ITEM NO.: F002J50275
FAZ II 12/30 ITEM NO.: F002J95419
FAZ II 16/25 ITEM NO.: F002J95836
FZA 12 X 40 M 8/15 NO.: F002J60715
FZA 14 X 40 M 10/25 NO.: F002J60718
FZA 18 X 80 M 12/25 NO.: F002J60721
FBN 10/15+23 NO. F002J45142
FBN 12/15+35 NO. F002J45147
FBN 16/25+45 NO. F002J45151
EAM 8 NO. F002J60812
EAM 10 NO. F002J60813
EAM 12 NO. F002J60814
FISHER MAKE INJECTION MORTAR , ONE CARTRIDGE 360 ML
+ 2 STATIC MIXER, FISV 360 S ARTICLE NO.: F002J94405
5
Each
231.11
1,155.55
5
Each
330.00
1,650.00
5
Each
209.00
1,045.00
500
Each
616.00
3,08,000.00
5
Sqm.
440.00
2,200.00
10
KG
500.00
5,000.00
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
51.81
62.37
85.80
82.50
128.32
107.80
212.41
200.20
521.40
324.50
91.08
177.10
132.00
125.07
321.20
26.95
39.82
106.26
9.13
13.20
22.00
259.05
311.85
429.00
412.50
641.60
539.00
1,062.05
1,001.00
2,607.00
1,622.50
455.40
885.50
660.00
625.35
1,606.00
134.75
199.10
531.30
45.65
66.00
110.00
5
Each
1,369.50
6,847.50
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
J.7.23
FISHER MAKE INJECTION MORTAR , ONE CARTRIDGE 390 ML
+ 2 STATIC MIXER, FISM 390 S ARTICLE NO.: F002J93048
2
Each
1,584.00
3,168.00
5
2
2
KG
KG
KG
514.80
294.03
342.54
2,574.00
588.06
685.08
100
300
100
100
5
Tonne
Kg
Cum
Cum
1000 Nos
5,240.00
14.00
1,120.00
1,200.00
4,800.00
5,24,000.00
4,200.00
1,12,000.00
1,20,000.00
24,000.00
75
Per Hour
880.00
66,000.00
5
Sqm.
12,650.00
63,250.00
50
Sqm.
154.00
7,700.00
200
Sqm..
74.35
14,870.00
500
RM
33.00
16,500.00
2000
RM
75.00
1,50,000.00
100
RM
27.50
2,750.00
J.8
J.8.1
J.8.2
J.8.3
J.9
J.9.1
J.9.2
J.9.3
J.9.4
J.9.5
J.10
J.11
J.12
J.13
J.14
J.15
J.16
Supplying "Choksey" make following material (all tools and tackles
required for using / applying the material is to be supplied / made
available by the contractor) :
Thunder proof
PAINTEX (Acrylic white crack filling compound)
KLEARSIL (Pure acrylic crack filling compound)
Supply of following material at site as directed by EIC.
Supply of Portland cement.
Supplying white cement
Supply and stacking of coarse sand.
Supply and stacking of coarse aggregate20 mm nominal size
Supply of bricks class designation 75
Supply and operation of JCB for desilting , excavation, drain cleaning ,
dressing and other misc. works on hourly basis including the cost of
fuel, operator, helper etc. as per requirement of GAIL and instruction of
EIC.
Providing and fixing of signage boards of non metallic, Photo
Luminescent Rigid Sheet type with auto glow properties and with high
intensity luminous properties of approved quality and make in all colour
and pattern with or without hanging arrangement complete (any
structural arrangement required will be paid for separately).
Dry Cleaning/washing horizontal/vertical blinds available in public
buildings made of synthetic cloth/special cloth material using approved
detergent. The rate shall include cost of taking out the blinds and
refixing the same all complete to the entire satisfaction of EIC. (Payment
shall be made based on opening area of windows only.)
Cleaning the sand stone/grit wash/other stone surface and removing dirt,
dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable
growth etc., including providing, applying and washing the surface with
liquid Ammonia Chemical of 5% solution and other chemical cleaning
agent as approved by Archaeological Survey of India/ Engineer-incharge, of approved brand and manufacturer, with the help of required
scrubbers and also cleaning with machine operated water jet mixed with
desired quantity of fine silica where ever required, without causing any
scratching/ damage to the stone surface and finally washing the surface
with clean water with the help of pressure jet machine, complete in all
respect, including taking all precautions to safeguard ventilators,
windows, doors etc. by suitable covering so as to avoid any damage to
the building/ structure, all as per direction of Engineer-in-charge (The
rate is inclusive of all materials & labours involved including
scaffolding).
Cleaning of drains of all sections inside GAIL premises including
dewatering manually or with pumps and removal of
grass,vegetation,malba,brick, scrap mud, earth etc. and keeping the
malba away from the drain & malve, etc. shall be disposed off at the
location shown by EIC with in the GAIL GAON premises.
Cleaning of outside Nala from corner of NTPC side GAIL boundary to
connecting in main nala on Phaphund road including dewatering
manually or with pumps and removal of grass,vegetation,malba,brick,
scrap mud, earth etc. and keeping the malba away from the drain &
malve, etc. shall be disposed off at the location shown by EIC.
Providing, erecting & dismantling of barricading with 40 mm dia MS
pipe of panel size 2.50m X 1.50m horizontal & vertical respectively
with GI sheet including all barricading material, clamping etc.
Complete. The barricading is to be fixed as per requirement of EIC &
F&S Deptt. on the requirement basis. This item also includes the proper
arrangement of glow signage with reflecting material for writing
warning/ caution matter on the GI sheet barricading as per direction of
EIC..
SCHEDULE OF RATES (SOR)
TENDER NO.:GAIL/PA14/47678/8000006352/SD [E-Tender Bid Invitation No.- 8000006352]
SUBJECT: CIVIL REPAIR & MAINTENANCE WORKS AT GAIL GAON TOWNSHIP, DIBIYAPUR, DIST. AURAIYA (U.P)
GAIL'S ESTIMATE
SR.NO.
Description of Item
J.17
Providing & fixing 4mm thick Aluminium composite panel cladding of
approved shade & pattern of INDO BOND or equivalent make (
exterior grade) sandwiched between two skins of 0.5mm with
thermoplastic core of mid low density poythene ACP cladding to be
fixed on grid of standard size of aluminium section 25mmx50mm
framing by anchored screws and double tape of approved quality
including sealing the joints by the silicon sealant (789-Doorcorning
make) to make joints leak proof including the cost of cutting bending &
fixing of ACP sheets, scaffolding etc., complete as per direction of
Engineer-In-Charge, (scaffolding to be paid separately)
Cutting hole up to 30cm x30cm or less in any dimension RCC floors,
walls or in roof of any thickness for passing any type of pipe or cable or
for any other purpose as per plant requirement etc. and repairing the hole
after insertion of drains pipe comp.. So as to make it leak proof.
J.18
J.19
J.20
J.21
J.22
J.23
Making chase up to 10cms x10cmsx 10cms or less in any dimension
either brick wall/Floor/roof or in RCC wall/floor/roof and making good
after laying of any type of cable or pipes etc.
Erection & dismantling of scaffolding on height above 3 m from
supporting structure or Ground level which ever is less up to any height,
as per instruction of EIC. Supply of all scaffolding material, manpower
for erection, etc. shall be in the scope of contractor.
Note: The scaffolding charges shall be paid in this item for carrying out
the all jobs of SOR for the height having more than 3 m. The
measurement shall be measured based on the actual plan area of
scaffolding & corresponding height erected at site. No job shall be
allowed for jobs having height more than 3mt without scaffolding). The
scaffolding is to be fixed as per requirement of EIC & F&S Deptt.))
Applying ANTI-CORROSIVE bitumastic coating on foundations,
drains, floors, etc. (two or more coats) to give an even surface including
dismantling & repair of damaged surface, all complete.
Providing and applying Non-shrink grout (CNS 50) or as approved
(prepared as per manufacture's recommendation) for grouting of bolts,
filling up of pockets etc. in concrete / RCC works as per site
requirement, all complete.
Pressure grouting in RCC or any other surface by making holes of
required dia. and fixing of appropriate nipple and then grouting of
cement slurry mixed with water proofing compound by means of
pressure grouting machine as directed by EIC complete with all labour
(Materials like cement, waterproofing compound will be paid
separately).
Total Part -I
Quantity
Unit
Unit Rate (Rs.)
Amount (Rs.)
15
Sqm.
3,500.00
52,500.00
100
Each
196.40
19,640.00
200
RM
77.65
15,530.00
10000
PER Sqm.
PER RM
HEIGHT
20.63
2,06,300.00
20
Sqm.
54.15
1,083.00
20
KG
13.76
275.20
50
Per Hole
55.00
2,750.00
17,50,465.99
Note:.
Note:
1. The contractor shall quote the rates of all materials to be supplied in this contract by considering the necessary wastage, carriage, all taxes & duties,
etc.. The final measurement shall be measured for finished item executed at site as per CPWD specifications.
2. The contractor shall quote the rates of team work services of the carpentry, plumbing, sweeping, masonry, welding by considering the cost of
necessary tools, tackles, nails, screws, putty, thread, taflon tape, welding electrode, welding machine, fevicol, safeda, etc. for attending the complaints
under team work or wherever petty nature of consumables are not mentioned in the items.
3. The scaffolding charges shall be paid in the item no- J-20 for carrying out the all jobs of SOR for the height having more than 3 m. The measurement
shall be measured based on the actual plan area of scaffolding & corresponding height erected at site. No job shall be allowed for jobs having height
more than 3mt without scaffolding). The scaffolding is to be fixed as per requirement of EIC & F&S Deptt.))
Total Part -J