SO-LRP
CUSTOM OUTSIDE CORNER
With Perpendicular Fins
NOTE: Larger Sizes Are
Available.
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
Model # SO-LRP
m
m
)M
IN
I
M
UM
RA
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
6"
The formed
extruded
aluminum
profile
shall incorporate
a continuous
The
aluminum
profile
shall incorporate
a continuous
integral
integral
fin for contact
surface to
contact
to conventionally
fin
for surface
conventionally
installed installed
gypsum gypsum
drywall.
drywall.
Theprofile
fins shall
be be
7/8"primed
wide and
shall
be tapered to theprimer
edge.
The
formed
shall
with
corrosion-resistant
The taperedwith
fins shall
be punched
with
to accept
compatible
materials
normally
in holes
use staggered
in conjunction
with
commercial
standard screw
interiors,
fastening.
i.e.: joint
A series
compound,
of continuous
latex and
grooves
enamelshall
paints,
be
extruded
into the face
of the fins to provide greater bonding surface.
and
wall covering
adhesives.
The extruded profiles shall be primed with corrosion-resistant
primer compatible with materials normally in use in conjunction with
MATERIAL:
Aluminum
alloy................3003
or paints,
equal
commercial interiors,
i.e.: joint
compound, latex andH-14
enamel
Finish......................................Factory
primed
and wall covering
adhesives.
(1
52
.4
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
DI
US
Pittcon ÍÑÚÌÚÑÎÓÍr LLC
SPECIFY
ANGLE
Metal Thickness........................ .090" typical
MATERIAL: Aluminum alloy............6063 T5 or equal
Note:
Other thicknesses ranging from .062" to .125" are availFinish..............................Factory
primed
able upon
request, with some restrictions applying.
Check
factory for your needs.
1/2"
(12.7 mm)
Nominal
SO-LRP
NO SCALE
1"
(25.4 mm)
Nominal
OUTSIDE CORNER W/PERP. FINS
SECTION
EXAMPLE DETAIL
For use with conventional metal stud construction and 1/2" or 5/8"
GPDW.
The SO-LRP is a large radius outside corner or column cover with
perpendicular fins for corner drywall constructions similar to that
depicted here. Screws through the installation fins must always
engage metal or wood substructure to ensure proper installation.
SO-LRP
TAPE &
SPACKLE
TAPE &
SPACKLE
METAL
STUDS
1/2" OR 5/8"
GPDW
SO-LRP
NO SCALE
STUD WALL
PLAN/SECTION
All details, methods and specifications are the exclusive property of Pittcon
Softformsr LLC. Pittcon reserves the right to change any specifications or
details without prior notification. All Softformsr profiles are available in
standard 10' lengths ±1/8" (2.048 M). Other lengths are available as special
order items. For custom shapes, sizes, or for special finishes, please contact
the factory or your nearest Pittcon sales representative.
r
© 2008 第½±² ÍÑÚÌÚÑÎÓÍ ÔÔÝ
r
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SO 51
SO-LRT
1"
(25.4 mm)
Nominal
1/2"
(12.7 mm)
Nominal
CUSTOM OUTSIDE CORNER
WITH TANGENTIAL FINS
NOTE: Larger Sizes Are
Available.
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
Model # SO-LRT
Pittcon ÍÑÚÌÚÑÎÓÍr LLC
The extruded profiles shall be primed with corrosion-resistant
primer
compatible
with materials
normally in use in conjunction
with
MATERIAL:
Aluminum
alloy................3003
H-14 or equal
commercial interiors,
i.e.: joint compound, latex and enamelprimed
paints,
Finish......................................Factory
and wall covering adhesives.
m
m
)M
IN
IM
U
M
(1
52
.4
The
aluminum
profile
shall shall
incorporate
a continuous
integral
The formed
extruded
aluminum
profile
incorporate
a continuous
fin
for surface
contact to
conventionally
installedinstalled
gypsum gypsum
drywall.
integral
fin for surface
contact
to conventionally
The
formed
shall
be primed
with
corrosion-resistant
drywall.
The profile
fins shall
be 7/8"
wide and
shall
be tapered to theprimer
edge.
compatible
materials
normally
use staggered
in conjunction
with
The taperedwith
fins shall
be punched
withinholes
to accept
commercial
interiors,
i.e.: joint
compound,
latex and
enamelshall
paints,
standard
screw
fastening.
A series
of continuous
grooves
be
and
wall covering
adhesives.
extruded
into the face
of the fins to provide greater bonding surface.
R
A
D
IU
S
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
6"
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
SPECIFY
ANGLE
1-1/2"
(38.1 mm)
Nominal
Metal Thickness........................ .090" typical
MATERIAL:
T5.125"
or equal
Note:
OtherAluminum
thicknessesalloy............6063
ranging from .062" to
are available upon
request, with some restrictions applying.
Check
Finish..............................Factory
primed
factory for your needs.
SO-LRT
OUTSIDE CORNER W/TANGENT FINS
NO SCALE
SECTION
EXAMPLE DETAIL
For use with conventional metal stud construction and 1/2" or 5/8"
GPDW.
The SO-LRT is a large radius outside corner or column cover with
perpendicular fins for corner drywall constructions similar to that
depicted here. Screws through the installation fins must always
engage metal or wood substructure to ensure proper installation.
SO-LRT
TAPE &
SPACKLE
METAL
STUDS
TAPE &
SPACKLE
1/2" OR 5/8"
GPDW
SO-LRT
NO SCALE
STUD WALL
PLAN/SECTION
All details, methods and specifications are the exclusive property of Pittcon
Softformsr LLC. Pittcon reserves the right to change any specifications or
details without prior notification. All Softformsr profiles are available in
standard 10' lengths ±1/8" (2.048 M). Other lengths are available as special
order items. For custom shapes, sizes, or for special finishes, please contact
the factory or your nearest Pittcon sales representative.
r
© 2008 第½±² ÍÑÚÌÚÑÎÓÍ ÔÔÝ
r
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SO 52
SO-LRPT
CUSTOM OUTSIDE CORNER
With One Perpendicular Fin
NOTE: Larger Sizes Are
Available.
SAMPLE SPECIFICATION
specify as: SOFTFORMS®
DI
US
Model # SO-LRPT
Pittcon ÍÑÚÌÚÑÎÓÍ LLC
UM
(1
52
.4
m
m
)M
IN
IM
3330 W. Flower Street
Phoenix, AZ 85017
(800) 637-7638
(602) 233-9100
Fax: (602) 233-9400
6"
6409 Rhode Island Avenue
Riverdale, MD 20737
(800) 637-7638
(301) 927-1000
Fax: (301) 699-8690
RA
r
The formed
extruded
aluminum
profile
shall incorporate
a continuous
The
aluminum
profile
shall incorporate
a continuous
integral
integral
fin for contact
surface to
contact
to conventionally
fin
for surface
conventionally
installed installed
gypsum gypsum
drywall.
drywall.
Theprofile
fins shall
be be
7/8"primed
wide and
shall
be tapered to theprimer
edge.
The
formed
shall
with
corrosion-resistant
The taperedwith
fins shall
be punched
with
to accept
compatible
materials
normally
in holes
use staggered
in conjunction
with
commercial
standard screw
interiors,
fastening.
i.e.: joint
A series
compound,
of continuous
latex and
grooves
enamelshall
paints,
be
extruded
into the face
of the fins to provide greater bonding surface.
and
wall covering
adhesives.
The extruded profiles shall be primed with corrosion-resistant
primer compatible with materials normally in use in conjunction with
MATERIAL:
Aluminum
alloy................3003
or paints,
equal
commercial interiors,
i.e.: joint
compound, latex andH-14
enamel
Finish......................................Factory
primed
and wall covering
adhesives.
SPECIFY
ANGLE
1/2"
(12.7 mm)
Nominal
Metal Thickness........................ .090" typical
MATERIAL: Aluminum alloy............6063 T5 or equal
Other thicknesses ranging from .062" to .125" are availFinish..............................Factory
primed
able upon
request, with some restrictions applying.
Check
Note:
factory for your needs.
SO-LRPT
NO SCALE
1"
(25.4 mm)
Nominal
OUTSIDE CORNER
W/ONE PERPENDICULAR FIN
EXAMPLE DETAIL
For use with conventional metal stud construction and 1/2" or 5/8"
GPDW.
The SO-LRPT is a large radius outside corner or column with
perpendicular fins for corner drywall constructions similar to that
depicted here. Screws through the grooved fins must always
engage metal or wood substructure to ensure proper installation.
SO-LRPT
METAL
STUD
TAPE &
SPACKLE
TAPE &
SPACKLE
1/2" OR 5/8"
GPDW
SO-LRPT CUSTOM CORNER
NO SCALE
PLAN/SECTION
All details, methods and specifications are the exclusive property of Pittcon
Softformsr LLC. Pittcon reserves the right to change any specifications or
details without prior notification. All Softformsr profiles are available in
standard 10' lengths ±1/8" (2.048 M). Other lengths are available as special
order items. For custom shapes, sizes, or for special finishes, please contact
the factory or your nearest Pittcon sales representative.
r
© 2008 第½±² ÍÑÚÌÚÑÎÓÍ ÔÔÝ
r
PREFORMED ARCHITECTURAL PROFILES
FOR DRYWALL CONSTRUCTION
SO 53