ANTIFOULING
Optimum Performance
Aluminium
Very Strong
Steel
Strong
Wood
Moderate
Glass Fibre
Mild
Above Water
Below Water
Micron Extra
®
Ideal for High Speed Craft
High strength, self-polishing antifouling that
provides up to 2 seasons protection in high fouling
areas from one application (3 coats). Improved
resin system offers more time between application
and immersion – up to 12 months. Contains Biolux.
Contains Copper Oxide and Preventol A4S
Thinners No.3
MICRON EXTRA
Black
Blue
Dover white
Green
Grey
Navy
Red
Coverage
2.5 L
YBA994/2.5
YBA920/2.5
YBA904/2.5
YBA924/2.5
YBA964/2.5
YBA929/2.5
YBA944/2.5
25m2/2.5 L
175240
175223
175220
175226
175236
175229
175232
750 ml
YBA994/750
YBA920/750
YBA904/750
YBA924/750
YBA964/750
YBA929/750
YBA944/750
7.5m2/750 ml
175242
175225
175222
175228
175237
175231
175234
Micron® Optima
The ultimate performer in eroding antifoulings
with revolutionary activator and new resin
system for unparalleled effectiveness over a full
season. Solvent free for easy clean up.
Contains Copper Oxide and Zinc Pyrithione
Thinners: Water
MICRON OPTIMA
Black
White
Light blue
Red
Coverage
2L
175239
175219
175238
175235
YBA993/2
YBA903/2
YBA973/2
YBA953/2
16.6m2/2 L
Cruiser® Uno
One coat antifouling formulated for both power and sailing boats (up to 25 kts). One season's antifouling
protection from one application. Can be immersed the same day. Compatible with most antifoulings,
no need to be sanded before reapplication. Not compatible with VC systems.
Contains Copper Oxide and Preventol A4S. Thinners No.3
CRUISER UNO
Black
Blue
Navy
Red
White
Coverage
3L
175160
175148
175152
175157
175144
YBA295/3
YBA210/3
YBA234/3
YBA255/3
YBA203/3
2
25.5m /3 L
2.5 L
175159 YBA295/2.5
175147 YBA210/2.5
175151 YBA234/2.5
175156 YBA255/2.5
175143 YBA203/2.5
21.3m2/2.5 L
750 ml
175161 YBA295/750
175149 YBA210/750
175153 YBA234/750
175158 YBA255/750
175145 YBA203/750
6.4m2/750 ml
Trilux
Bright coloured medium performance, hard antifouling suitable for all substrates including aluminium.
Offers protection in medium conditions where a hard, scrubbable antifouling is required. Ideal for fast
powerboats and dry sailed craft. Contains Biolux. Also suitable for propellers, outdrives and sterngear.
Contains Copper Thiocyanate and Preventol A4S. Thinners No.3
TRILUX
Black
Blue
Grey
Scarlet
Green
White
Coverage
2.5 L
750 ml
175197 YBA591/2.5
175188 YBA515/2.5
YBA563/2.5
175195
175192 YBA550/2.5
175191 YBA521/2.5
175184 YBA508/2.5 175187 YBA508/750
26.3m2/2.5 L
7.9m2/750 ml
375 ml
175198 YBA591/375
175189 YBA515/375
175196 YBA563/375
175193 YBA550/375
175185 YBA508/375
3.9m2/375 ml
505
ANTIFOULING – cont’d
Interspeed Ultra
Waterways Plus
No longer just extra strong, a new, improved
formula makes this superior antifouling ultra
strong. It is ideal for high-speed craft or craft on
drying and mud berths. Can be burnished.
Contains Biolux. Contains Copper Oxide and
Preventol A4S. Thinners No. 3.
A copper based antifouling formulated for use in
fresh and brackish water. Waterways Plus can
be applied several weeks before immersion,
which makes it an ideal product for hire fleet
operators and inland waterway users.
Contains Copper Oxide and Zineb.
INTERSPEED
ULTRA
Black
Blue
White
Grey
Light blue
Princess grey
Green
Red
Coverage
2.5 L
750 ml
175182
175171
175163
175179
175169
175181
175167
175174
YBA393/2.5
YBA333/2.5
YBA303/2.5
YBA363/2.5
YBA331/2.5
YBA366/2.5
YBA323/2.5
YBA341/2.5
23.5m2/2.5 L
175183
175172
175164
175180
175270
175168
175175
YBA393/750
YBA333/750
YBA303/750
YBA363/750
YBA331/750
WATERWAYS PLUS
Bright red
Mid blue
Coverage
2.5 L
183713
183714
YBA365/2.5
YBA364/2.5
2
21.3m /2.5 L
-
YBA323/750
YBA341/750
7m2/750 ml
VC Offshore with Teflon®
VC 17M Extra
10 times thinner than traditional antifouling
new VC 17M Extra avoids the age-old problem
of “build up” of antifouling. Because it contains
Teflon®, VC 17M Extra antifouling has a super
smooth, fast surface without requiring sanding,
which minimises drag. This new formulation
is suitable for both cruising and racing boats.
Contains Copper Metal, Copper Thiocyanate
and Zinc Pyrithione. Thinners : VC General Thinner.
VC 17M EXTRA
Graphite
Bright White
Fluo-Orange
Coverage
2L
750 ml
181931 YBA762/2 181932 YBA762/750
181933 YBA766/2 181934 YBA766/750
181935 YBA769/750
22 m2/2 L
VC OFFSHORE
WITH TEFLON®
Black
Blue
Red
Shell white
Coverage
2L
175210
175204
175206
175202
750 ml
YBA797/2
YBA717/2
YBA747/2
YBA707/2
21.6 m2/2 L
175211
175205
175207
175203
YBA797/750
YBA717/750
YBA747/750
YBA707/750
2
8.1 m /750 ml
Prop-O-Drev Primer
Trilux Prop-O-Drev
Hard antifouling specially formulated for use on
outdrives outboard legs, propellers
and sterngear. Aerosol spray is ideal for
painting awkward shapes and difficult to reach
areas. Quick and easy application saves you
time and effort. Suitable for use on aluminium
and stainless steel.
A low-friction antifouling with Teflon®. It is ideal for use on outdrives,
propeller’s, trim tabs etc, where the aerosol container ensures easy
application of the antifouling to awkward areas. It is suitable for use
on aluminium. Contains Copper Thiocyanate.
Thinners : VC General Thinner.
PRIMOCON AEROSOL
300 ml
183720
506
8.3 m2/750 ml
VC Offshore with Teflon® is a high strength
antifouling with Teflon® which dries to a smooth,
hard, scrubbable finish, ideal for racing and
sailing boats. VC Offshore with Teflon® was
chosen by some of the leading contenders
for the Volvo Ocean Race 2001/2.
Contains Copper Oxide and Preventol A4S.
Thinners : VC General Thinner.
YPA688/300
TRILUX PROP-O-DREV/
VC PROP-O-DREV PRIMER
Black
Grey
500 ml
175212
175209
YBA798/500
YBA768/500
VARNISHES
Perfection Varnish
High performance 2-pack polyurethane varnish. Very high gloss.
The ultimate product for durability, gloss-retention and UV-resistance.
Apply over bare wood, existing 2-pack varnish or UCP.
Thinners No.9
PERFECTION VARNISH
Sikkens Cetol Marine
750 ml
175389
Coverage
Transparent satin impregnating
oil/varnish based on a modified alkyd
resin.
Beautifully emphasises the wood grain.
Easy application suitable for use on
tropical hard wood.
A primer and finish on teak decks and
other wooden parts. Use for exterior
work above the waterline.
Thinner: Sikkens AK
YVA853/A750
8.3 m2/750 ml
Schooner
A traditional tung oil based yacht varnish for classic yachts, suitable for
all internal and external wood. Schooner contains UV absorbers for a
long lasting finish and its easy to brush formulation gives a deep,
rich gloss.
Thinners No. 333
SCHOONER
Coverage
750 ml
YVA086/750
175379
10.5 m2/750 ml
375 ml
YVA086/375
175378
5.25 m2/375 ml
SIKKENS CETOL
Natural
Teak
Light
Coverage
750 ml
175113
IVA300/750
IVA310/750
175114
IVA315/750
183721
7.5 m2/750 ml
Goldspar
This internationally renowned varnish gives a full gloss polyurethane
finish. It is easy to use and dries quickly making it ideal when fast
overcoating is necessary.
A hard varnish, it is abrasion resistant and can be used over existing
varnish. Its new improved formula incorporates enhanced UV filters.
Thinners No. 1
GOLDSPAR
Coverage
750 ml
YVA213/750
175384
9 m2/750 ml
UCP
A universal clear primer for bare wood.
Exceptional adhesion properties make it
ideal as a primer to be overcoated by
most International finishes or varnishes.
Note: Do not use in conjunction
with Intertox.
Do not use on oily wood.
Thinners No. 9
375 ml
YVA213/375
175383
4.5 m2/375 ml
UCP
Coverage
375 ml
YPA600/375
175347
6.6 m2/375 ml
Goldspar Satin
Tough, abrasive resistant, UV resistant and fast drying, Goldspar Satin
offers the same features of its gloss counterpart, but dries to a beautiful
satin finish. Primarily for interior use.
Thinners No. 1
GOLDSPAR
SATIN
Coverage
2.5 L
175385 YVA251/2.5
25.8 m2/2.5 L
750 ml
175387 YVA251/750
7.7 m2/750 ml
Intertox
Unique clear preservative with 2 active
biocides to protect against wet and dry
rot and fungal stains.
To be used on bare wood.
Note: Do not use in conjunction
with UCP.
Do not use on oily wood.
Thinners No.1
375 ml
175386 YVA251/375
3.86 m2/375 ml
Original
A conventional general purpose yacht varnish with good gloss retention,
UV filters and excellent non-blooming qualities. Easy to apply over any
type of existing varnish and easy to re-coat. It is suitable for interior and
exterior use, whatever the construction.
Thinners No.1
ORIGINAL
Coverage
2.5 L
175380 YVA202/2.5
29.3 m2/2.5 L
750 ml
175382 YVA202/750
8.8 m2/750 ml
INTERTOX
Coverage
1L
YMA117/1
175298
8-12 m2/1 L lt *
* depending on porosity of wood
375 ml
175381 YVA202/375
4.4 m2/375 ml
507
FINISHES
& UNDERCOATS
Perfection
A 2-pack high performance polyurethane,
providing extremely durable gloss that will
last up to 5 years.
Can be used on wood GRP, steel and
aluminium (alloy) over appropriate primers.
May only be applied over existing
2-pack paints,
2-pack primers,
Perfection Undercoat of UCP. Thinners No.9.
Toplac
Premium 1-pack topside gloss paint.
A high performance formulation, it will retain
its colour and gloss up to 3 times longer
than conventional gloss paint.
Flow Agent 333 / Thinners No. 1
TOPLAC
Med. white
Snow white
Bounty
Donegal Green
Mauritius Blue
Oxford Blue
Coverage
2.5 L
175273
175276
181953
181954
181952
181951
YKA184/2.5
YKB000/2.5
YKJ292/2.5
YKT541/2.5
YKF991/2.5
YKB993/2.5
30m2/2.5 L
Brightside
Premium 1-pack polyurethane topside gloss
paint. Its Teflon® containing formula produces
a hardwearing, scratch resistant, easy clean
surface. Fast drying.
Flow Agent 333 / Thinners No. 1
BRIGHTSIDE
Black 051
Fire Red 504
Largo Blue 946
White 001
Coverage
508
250 ml
YDY999/250
YDC286/250
YDB946/250
YDB000/250
3.375m2/2.5 L
175262
175254
175251
175244
PERFECTION
Platinum A183
Mediterranean White A184
Off White A192
Royal Blue A216
Snow White B000
Jade Mist Green B663
Mauritius Blue F991
Flag Blue K990
Fighting Lady Yellow S056
Cream S070
Chilli Red
Rochelle Red S299
Jet Black Y999
Coverage
750 ml
YHA183/750
YHA184/750
YHA192/750
YHA216/750
YHB000/750
YHB663/750
YHF991/750
YHK990/750
YHS056/750
YHS070/750
YHE294/A750
YHS299/750
YHY999/750
9m2/750ml
181936
181937
181938
181941
181943
181944
181945
181946
181947
181948
185563
181949
181950
TOPLAC
Atlantic grey 289
Baltic blue 163
Bondi blue 016
Bounty 350
Danube blue 104
Donegal green 077
Ivory 812
Jet black 051
Landerdaule blue 936
Mauritus blue 018
Med. White 545
Oxford blue 105
Rochelle red 011
Rustic red 501
Snow white 001
Yellow 101
Coverage
175281
175278
175288
175283
175280
175287
175275
175289
175286
175282
175274
175279
175285
175290
175277
175284
BRIGHTSIDE
Black 051
Beige 090
Clipper White 003
Fire Red 504
Flag Blue 990
Largo Blue 946
Norfolk Green 241
Rescue Orange 265
Cream 027
Sapphire Blue 830
Seattle Grey 251
Snow White 001
Squall Blue 923
Coverage
750 ml
YDY999/750
175263
YDG090/750
175259
YDB003/750
175248
YDC286/750
175255
YDK990/750
175261
YDB946/750
175252
YDD583/750
175257
YDD265/750
175256
YDC089/750
175253
YDB830/750
175249
YDF051/750
175258
YDB000/750
175245
YDB923/750
175250
10.1m2/750ml
BRIGHTSIDE
Clipper White 003
White 001
Coverage
750 ml
YKF684/750
YKB914/750
YKU898/750
YKJ292/750
YKE938/750
YKT541/750
YKA187/750
YKY999/750
YKS936/750
YKF991/750
YKA184/750
YKB993/750
YKS299/750
YKZ501/750
YKB000/750
YKS101/750
9m2/750ml
2.5 L
175246
175243
YDB003/2.5
YDB000/2.5
33.8m2/2.5 L
Matting additive
A matting solution for mixing with
International Paint finishes and varnishes to
produce a satin or matt effect finish.
A 1:1 mix with Toplac produces a similar gloss
level to Goldspar Satin varnish.
May be added up to 25:75 by volume for a
flat-matt finish.
For interior and exterior use.
MATTING ADDITIVE
One-pack Matting Additive
Two-pack Matting Additive
175319
183736
750 ml
YMA715/750
YZM914/750
Pre-Kote
Undercoat for Toplac, Brightside, Interdeck
and Danboline. Excellent covering power
allows for easy colour changing.
Thinners No.1.
PRE-KOTE
2.5 L
750 ml
375 ml
YUG879
Blue grey
175377
/750
879
YUB000
YUB000
YUB000
White
175374
175376
175375
/2.5
/750
/375
001
2
2
2
30 m /2.5 L
9 m /750 ml
4.5 m /375 ml
Coverage
Perfection undercoat
Interdeck
A high performance extremely tough, long
lasting 2-pack undercoat for use under
Perfection gloss. May only be applied over
existing 2-pack finishes or primers, UCP or
bare GRP. White may be tinted with up to
10 % of Perfection gloss to achieve a range
of colours.
Specially formulated anti-skid deck paint
designed for use over all suitably primed
substrates. Contains a fine aggregate.
Low sheen finish.
Thinners No. 1
Thinners No.9.
PERFECTION UNDERCOAT
Blue 302
White 001
Coverage
750 ml
YRA302/750
175358
YRA003/750
175357
2
9 m /750 ml
INTERDECK
White 001
Beige 090
Cream 027
Grey 289
Pale Blue 339
Squall Blue 923
Coverage
750 ml
175267
175272
175270
175271
175268
175269
YJB000/750
YJG090/750
YJC089/750
YJF684/750
YJB339/750
YJB923/750
2
7 m /750 ml
Non-Slip additive
Danboline
For addition to International Paint gloss finishes and varnishes
to provide a non-slip surface.
Non-Slip Additive is effectively colourless when mixed into paint,
so no change in shade should be observed.
1 sachet per 750 ml paint.
High opacity bilge paint with
excellent coverage. Ideal for
bilges and engine bays.
NON-SLIP ADDITIVE
175320
20 mg
YMA905/1
Thinners No. 1.
DANBOLINE
Grey
Red
White
Coverage
2.5 L
YMA100
175293
/2.5
-
-
YMA102
/2.5
2
27 m /2.5 L
175296
509
750 ml
YMA100
175294
/750
YMA101
175295
/750
YMA102
175297
/750
2
8.25 m /750 ml
PRIMERS
Interprotect
High performance, 2-component, quick drying epoxy
based primer for high performance paint schemes on
all rigid substrates.
Thinners No. 7
Etch Primer
A primer for the effective pre-treatment of alloy surfaces.
Apply one coat only.
Thinners No. 7
INTERPROTECT
Grey
White
Coverage
500 ml
YPA110/500
175333
9m2/500ml
ETCH PRIMER
Orange
Coverage
2.5 L
750 ml
175343 YPA403/2.5 175345 YPA403/750
175340 YPA400/2.5 175342 YPA400/750
20.3m2/2.5 L
6m2/750ml
Primocon
A quick drying, general purpose below waterline
primer, ideal for metal keels and hulls prior to
antifouling, or for use as a barrier/sealer coat between
unknown or incompatible antifoulings. Replaces
Metallic Pink Primer for below water application.
Thinners No. 3
Yacht Primer
General purpose primer for use on wood, steel and
alloy above water. Replaces Metallic Pink Primer for
above water application.
Thinners No. 1
YACHT PRIMER
Grey
Coverage
2.5 L
750 ml
175338 YPA275/2.5 175339 YPA275/750
30m2/2.5 L
9m2/750ml
PRIMOCON
Grey
Coverage
2.5 L
750 ml
175354 YPA984/2.5 175356 YPA984/750
18.5m2/2.5 L
5.6m2/750ml
THINNERS
Type
1 litre
500 ml
Description - Use
Thinner No.1
175370
YTA800/1
175371
YTA800/500
General purpose thinner and equipment cleaner for 1-pack paints
and varnishes (except Brightside).
Thinner No. 3
175366
YTA085/1
175367
YTA085/500
Thinner and equipment cleaner for antifoulings (except VC).
Not suitable for thinning Micron Optima.
Thinner No. 7
175364
YTA061/1
-
-
Thinner and equipment cleaner for epoxy-type International Paint
products.
Thinner No. 9
175363
YTA006/1
-
-
Thinner and equipment cleaner for 2-pack polyurethane-type
International Paint products and UCP.
Thinner No. 10
175365
YTA063/1
-
-
For use with 2-pack polyerethanes and for spraying 1-pack varnishes
and finishes where a faster thinner is required.
Flow Agent 333
-
-
175368
YTA333/500
Premium flow-agent for thinning Brightside and other 1-pack paints
and varnishes.
VC General Thinner
Sikkens AK Thinner
Thinner and equipment cleaner for VC products.
Can also be used to remove VC 17 m.
General purpose thinner and equipment cleaner
for Sikkens one pack wood care products.
1 litre
175369
510
YTA600/1
175108
500 ml
ITA100/500
Epiglass – epoxy resin systems
B
A
C
D
Model
E
Description – Use
1.2 kg pack
A
International Paint’s Epiglass® HT9000 system is a versatile epoxy resin system suitable for a wide variety
of uses on boats of all types. In addition to the high strength and durability associated with epoxy resins,
175133 YAA900/AF1.2 this unique and easy to use 4 :1 mix ratio formula offers very special features.
Kit comes complete with 3 mixing cups.
Epiglass DIY pack
Epiglass Project Pack
B
3.75 L
Fast cure
175135 YAA900/F3.75
Standard cure
175137 YAA900/S3.75
3.75 L
HT55 DISPENSING PUMP
175392
Pump set
YXA053/1
500 ml
C
HT901 Epoxy Solvent
D
HT220 Wood Fibres
E
HT110 Glue Powder
175372
YTA901/500
1 Litre/175 gm
175395 YXA220/175
1 Litre/50 gm
183813
YXA110/50
Pump avoids spillage and contact of the resin and hardener with skin when mixing ;
an important factor when using epoxy materials.
Epiglass® Epoxy Solvent has been formulated for use with Epiglass® Epoxy Resin in surface preparation
and equipment cleaning. Epoxy Solvent should be used for wiping down surfaces prior to application
of resin, glue or fairing mixes.
This is a white cellulose fibre designed for adding to glue mixes when bonding wood and especially
for fillet bonding.
This extender produces a high strength epoxy glue when mixed with the Epiglass® resin mix. The viscosity
of the glue can be varied by the volume of Glue Powder added. Glue Powder should be added to the filling
and fairing mixes to improve trowelling and feather properties and to prevent sagging.
Osmosis
treatment
& protection
A
Model
Gelshield 200
A
B
Green
Grey
750 ml
Description – Use
2.5 L
Quick drying, high performance, 2-component epoxy for application to sound gelcoats to help
175335 YPA212/50 175334 YPA212/2.5
protect against “osmosis”. Provided in two shades (green and grey) to ensure complete coverage.
175337 YPA213/750 175336 YPA213/2.5 Suitable for use in temperatures down to 5oC. Thinners No. 7
Coverage
6m2/750ml
20.3m2/2.5 L
VC Tar2
1L
2.5 L
Black
Off white
Coverage
B
175264 YEA729/1 175265 YEA729/2.5 2-component epoxy primer which protects against osmosis in GRP and provides anti-corrosive
protection on steel and alloy. Provides a smooth surface without sanding. Compatible with VC Tar.
183814 YEA728/1 183815 YEA728/2.5 Thinners : VC general thinners
11.3m2/1 L
28.3m2/2.5 L
511
Fillers
A
B
Model
250 ml
A
Description – Use
A quick drying epoxy filler ideal for long-lasting repair onto all suitably primed substrates. Fast curing
1L
Watertite
time, excellent for filling small areas quickly and ideal for the DIY yachtsman. This super-smooth 2-pack
Epoxy
175142 YAV145/250 175141 YAV145/1 formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes
Filler
at up to 2 cm depth per application. It has excellent resistance to water penetration. Thinners No. 7
B
170 ml
Interfill
100 Wood
Filler
A conventional above-the-waterline wood filler, now packaged as part of the Interfill range. Quick drying,
creamy texture for filling screw holes and small fine cracks in paintwork. The matt white filler is touch dry
after approximately 11/2 hours. Thinners No. 1
175121
YAA041/170
-
SPECIALS
A
5L
B
20 L
A
Intertuf Black
175119
JBA016/5
B
Interstrip
Paint Remover
181955
YMA175/5
175118
Description – Use
JBA016/20
New from International® Paint is Interstrip Paint Remover, designed to remove single
component yacht paints such as enamels, antifoulings, primers and varnishes.
-
BOAT CARE
RANGE
A
Model
Narrow boat blacking paint. Thinners No. 1
B
C
D
E
F
G
H
I
Description – Use
Restorer/brightener for old and dirty hardwoods. Cleans and restores teak and other hardwoods to new.
Does not damage GRP, varnish, paintwork or aluminium. For use on any interior or exterior hardwood.
Finish with Teak Oil.
500 ml
1L
175316 YMA640/500
-
175311 YMA625/500
-
Gloss restorer for paintwork and GRP. Rubbing liquid for removing marks and yellowing, and for restoring
gloss to painted surfaces and GRP. For manual or slow machine use (800-1000 rpm).
Free from wax and silicone oils. Low Odour.
C
Gelcoat Stain
175310 YMA622/500
Remover
-
High strength GRP cleaning gel. Easy to use deep penetrating gel which dissolves stains and marks
on GRP like waterline or exhaust pipe stains. Will not run when applied on vertical surfaces.
D
Super
Cleaner
175309 YMA620/500
-
High strength cleaner for use on GRP and painted surfaces to remove wax, oil, grease and dirty marks.
First stage of surface preparation prior to painting. Biodegradable.
E
Boat
Shampoo
185579 YMA620/500 185578 YMB621/1
Universal cleaner for use on most surfaces. Will not remove wax and leaves a shiny water repellant
surface. Can be used with salt water, making it convenient to use anywhere.
F
Polwax
175312 YMA635/500
-
Cleaner, polish and wax in one. For quick and easy cleaning, polishing and waxing of oxidised GRP
and painted surfaces. Free from silicone oils. Low odour. For manual or machine use (800-100rpm).
G
Polish
with Teflon®
-
Ultimate quality polish with Teflon® containing wax for paintwork and GRP, providing a high gloss finish.
Excellent protection against dirt and oil contamination. May be used in direct sunshine.
For manual or machine use. Finish with Teflon Wax Sealer.
A
Teak Restorer
B
Liquid
Rubbing
175313 YMA636/500
H
Wax Sealer
with Teflon®
175314 YMA639/500
-
Ultra-performance deep-gloss wax sealer. Ultimate quality non-abrasive wax sealing solution with Teflon®.
Provides long-lasting high gloss hard-shell protection. Thin-film technology ensures that one bottle goes
a long way. May be left for an extended period prior to polishing off. Excellent protection against dirt
and oil contamination. May be used in direct sunshine. Contains UV protectors.
I
Teak Oil
175318 YMA645/500
-
Penetrating hardwood oil. Deep penetration wood treatment containing linseed and tung oils. Produces
a protective and easy-clean surface. For use on any interior or exterior hardwood. Penetrates even moist
wood. Contains an anti-rust wax for metal surfaces. Clean wood with Teak Restorer if required.
512