Dumont #5SF
Same as the #5 forceps
but with the finest tips
ever produced by
Dumont.
Super Fine Tip,
0.025 mm x 0.005 mm,
Inox,
11 cm
No. 11252-00
Dumont #5
Fine Tips
Ceramic Coated
Dumont #5
The tips are expertly
finished under 40x
magnification and
polished on the inside.
The shanks are shaped
so that the tips close flat
for 3 mm and therefore
are less likely to open
under excess pressure.
Biologie tip,
0.05 x 0.01mm
Inox,
11 cm
Provides no reflection
while working under the
microscope. The scratch
and corrosive resistant
coating guarantees a long
lasting pair of forceps.
Biologie tip,
0.05 mm x 0.01 mm,
Inox with ceramic
coating,
11 cm
No. 11254-20
No. 11252-50
Standard tip,
0.10 mm x 0.06 mm,
Inox,
11 cm
Biologie tip,
0.05 mm x 0.02 mm,
Inox,
11 cm
No. 11251-20
No. 11252-20
Standard tip,
0.10 mm x 0.06 mm,
Dumoxel,
11 cm
Biologie tip,
0.05 mm x 0.02 mm,
Dumoxel,
11 cm
No. 11251-30
No. 11252-30
Standard tip,
0.10 mm x 0.06 mm,
Dumostar,
11 cm
Biologie tip,
0.05 mm x 0.02 mm,
Dumostar,
11 cm
No. 11295-00
No. 11295-10
Standard tip,
0.08 mm x 0.04 mm,
cannot be autoclaved,
Carbon,
11 cm
Biologie tip,
0.05 mm x 0.02 mm,
Titanium,
11 cm
No. 11251-10
No. 11252-40
FORCEPS
DUMONT® FORCEPS
Dumont #5
Bevelled, very fine
shanks for best
visibility
Additional Information:
For information on Dumont special alloys
and tip styles, see page 95.
For sharpening stones designed for Dumont
forceps, see page 128 and 129.
For information on Titanium see page 5.
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
87
®
Dumont microsurgery
forceps with microblunted, atraumatic tips
Dumont #L5
Outils Dumont S.A., Switzerland, has supplied their regular forceps to the research and medical
professions for many years. Now, in design collaboration with a foremost European supplier of
microvascular instruments, Dumont puts their over one-hundred years of experience with hand
fashioned tools into these precision instruments.
The sides of these forceps are distinctively ribbed providing a better holding surface for maximum
control of the instrument. The shanks are arched toward each other to transmit more holding
strength to the points. The smooth inside surfaces at the tips will, with gentle pressure, close flat
for 5 mm, increasing the total holding area considerably. The microscopically matched tips are
gently blunted to prevent tissue puncture.
The Inox steel alloy optimizes both stain resistance and hardness. From the middle of the shank to
the tips of the instrument the inside and outside surfaces are highly finished under the microscope.
These special microsurgery forceps are also recommended as micro needle holders because of their
gently blunted, atraumatic tips.
FORCEPS
Medical #5,
Straight tip,
0.10 x 0.06 mm,
Inox,
11 cm
Medical #5/45,
45° tip,
0.10 x 0.06 mm,
Inox,
11 cm
Medical #5A,
Off-center tip,
0.13 x 0.08 mm,
Inox,
11.5 cm
No. 11253-20
No. 11253-25
No. 11253-21
Dumont #5 Inox
microdissection forceps,
with slide for holding tips
together so that specimens
may be securely held and
retained. Slide may also be
locked in place so that
forceps can be used in
regular fashion. With
gently blunted, atraumatic
tips, fully autoclavable.
Tip 0.10 x 0.06 mm,
11 cm
No. 11253-27
No. 11253-20
88
Medical #7,
Curved tip,
0.17 x 0.10 mm,
Inox ,
11.5 cm
Medical #5/90,
90° tip,
0.10 x 0.06 mm,
Inox,
11 cm
Medical #7S,
Short curve tip,
0.17 x 0.10 mm,
Inox,
12 cm
No. 11273-20
No. 11253-29
No. 11273-22
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
DUMONT® FORCEPS
Dumont #5CO
Dumont #55
Dumont #5XL
Bevelled, as #5 but
with extra light and
fine shanks
FORCEPS
Dumont #5 Mirror
Finish Forceps
The last 5 mm of the inside of the
tips are highly polished to reduce
tissue sticking to the forceps. Ideal
for embryos, nerves, or any other
adhesive tissue. The mirror finish
handle is an identifying mark.
Standard tip,
0.10 x 0.06 mm,
Inox
11 cm
No. 11251-23
Similar to the number #5
forceps but designed
specially for extra precise
work. The entire forceps
have been honed down to
make this the lightest and
most precise Dumont
forceps available.
Biologie tip,
0.05 mm x 0.01 mm,
Dumostar
11 cm
No. 11295-20
Biologie tip,
0.05 x 0.02 mm,
Inox
11 cm
No. 11252-23
Biologie tip,
0.05 mm x 0.02 mm,
Inox,
11 cm
No. 11255-20
Biologie tip,
0.05 mm x 0.02 mm,
Dumostar,
11 cm
No. 11295-51
Longer version of the #5
microsurgery forceps,
0.10 x 0.06 mm
Inox,
15 cm
No. 11253-10
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
89
®
Dumont #5/45
Teflon Coated
Dumont #5
Dumont #5/45
Cover Slip Forceps
45° tips for
improved visibility
and control
Dumont #4
Similar to #5, but with
broader shanks
400%
FORCEPS
Standard tip,
0.13 mm x 0.08 mm,
Dumoxel,
11 cm
No. 11241-30
Biologie tip,
0.06 mm x 0.04 mm,
Dumoxel,
11 cm
Standard tip,
0.10 mm x 0.06 mm,
Dumoxel,
11 cm
Designed to pick up cover slips
out of multi-well plates. The
bottom tip is biologie thin for
easier insertion. The tip width
is squared for a better grip.
1 mm from tip to bend,
Upper tip: 0.10 x 0.08 mm,
Lower tip: 0.10 x 0.02 mm,
Dumoxel,
11.5 cm
No. 11251-35
Teflon coated #5 forceps,
anti-magnetic, ideal for
use in cryogenic
environments and
for EM samples.
Tip 0.10 mm x 0.06 mm,
11 cm
No. 11242-40
No. 11626-11
No. 11294-00
Standard tip,
0.13 mm x 0.08 mm,
Dumostar,
11 cm
No. 11251-33
90
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
DUMONT® FORCEPS
Dumont #7
Fine Tips
The tips are expertly finished
under 40x magnification and
polished on the inside. The
shanks are shaped so that
the tips close flat for 3 mm
and therefore are less likely
to open under excess
pressure.
Dumont #7
Large radius
curved shanks
Ceramic Coated
Dumont #7
Dumont #7b
Biologie tip,
0.07 mm x 0.04 mm,
Inox with ceramic
coating,
11cm
Standard tip with
serrations,
0.17 mm x 0.10 mm,
Inox,
11 cm
No. 11272-50
No. 11270-20
Dumont #6
Sharply angled
tips for access
to difficult areas
Standard tip,
0.17 mm x 0.10 mm,
Dumoxel,
11.5 cm
No. 11271-30
FORCEPS
Biologie tip,
0.07 mm x 0.04 mm,
Dumoxel,
11.5 cm
No. 11272-30
Biologie tip,
0.07 mm x 0.04 mm,
Titanium,
11.5 cm
No. 11272-40
Standard tip,
0.17 mm x 0.10 mm,
Dumostar,
11.5 cm
No. 11297-00
Biologie tip,
0.07 x 0.03 mm,
Inox,
11 cm
Biologie tip,
0.07 mm x 0.04 mm,
Dumostar,
11.5 cm
No. 11297-10
No. 11274-20
Standard tip,
0.17 mm x 0.10 mm,
Dumoxel,
11.5 cm
No. 11260-30
For more information on
titanium, see page 5.
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
91
®
Dumont Self-Closing Forceps
Dumont #3
Ideal for lifting and holding EM grids. They also have many other
applications where consistent pressure at the tips is important.
Correctly tensioned “cross-over” stainless steel shanks come to a
microscopically matched point.
Tapered and especially
sturdy shanks
FORCEPS
Biologie tip with medium
tension,
0.08 mm x 0.04 mm,
Dumoxel,
11.5 cm
Biologie tip,
0.10 mm x 0.06 mm,
Dumoxel,
11 cm
Standard tip,
0.20 mm x 0.12 mm,
Dumoxel,
11.5 cm
Standard tip,
0.17 mm x 0.10 mm,
Inox,
11 cm
Standard tip,
0.17 mm x 0.10 mm,
Dumoxel,
12 cm
No. 11262-30
No. 11267-30
No. 11231-20
No. 11231-30
No. 11261-30
Standard tip,
0.17 mm x 0.10 mm,
Dumostar,
12 cm
No. 11293-00
92
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
DUMONT® FORCEPS
Dumont SS
Dumont #45
Forceps with a very special feel. They have strong, thick
shanks falling off sharply to points of 0.10 mm x 0.06
mm. The tips are smooth on the inside for a gentle grip.
Applying full strength will not separate tips and a
strong hold on the smallest specimen is assured.
Dumont Ceramic
Tipped Forceps
Dumont AA
45° angle, tip
0.20 x 0.12 mm,
Inox,
13.5 cm
FORCEPS
No. 11203-25
Standard tip with
serrated grip,
0.20 mm x 0.12 mm,
12 cm
Dumoxel,
13.5 cm
Ceramic is six times harder than
stainless steel so the tip will hold
its geometry better than other
forceps. It is also static-free,
electromagnetic discharge safe
without carbon/metal additives,
chemically inert, and working
temperature resistant to 1500°C.
Tip size 0.4 mm x 0.2 mm.
13.5 cm
No. 11200-33
No. 11210-60
No. 11245-30
Delicate pattern
straight tip,
0.20 x 0.12 mm,
Inox,
13.5 cm
No. 11203-23
Replacement tips for 11210-60
No. 11210-61
Sold only by the dozen.
Not available individually.
Slip-proof acid and electric
shock resistant epoxy coating
covering 17.5 mm from the tips,
0.4 mm x 0.2 mm,
Inox
12.5 cm
No. 11210-10
Polished Inox alloy without
epoxy covering.
12.5 cm
No. 11210-20
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
93
®
Dumont #2
Mouse
Laminectomy
Forceps
Dumont Mini Forceps
Epoxy Coated
Dumont #2AP
FORCEPS
Style 3,
0.12 mm x 0.07 mm,
Inox,
7 cm
Style 4,
0.14 mm x 0.06 mm,
Inox,
7 cm
Style 5,
0.09 mm x 0.05 mm,
Inox,
8.2 cm
No. 11200-10
No. 11200-12
No. 11200-14
O-Rings for Forceps
These forceps can be
used to break off delicate
bone during mouse
laminectomies, as well as
fine skull bone removal.
0.40 x 0.02 mm,
Inox,
12 cm
These epoxy covered
forceps provide good
insulation for up to 220
AC voltage work and
show high imperviousness to chemical
solutions. Low transmittance of cold makes them
ideal for work with frozen
sections. Super cold sections will not adhere to
the gripping surfaces.
Tips 1.5 mm wide,
12 cm
No. 11223-20
These rubber o-rings fit our
Dumont forceps and keep them
closed with variable degrees
of pressure on the tips.
Pkg. of 10
No. 11200-00
No. 11220-21
94
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
DUMONT® FORCEPS
When choosing Dumont forceps, consider:
1. The style and shape of forceps you want
2. The fineness of the tips you require
3. The alloy best suited to your work
Styles
Dumont forceps come in a wide variety of shapes and sizes, from the world famous straight #5 to the extremely popular curved #7.
Below you will find a brief description of the most popular styles.
Dumont 2: Straight forceps with wide but thin tips often referred to as Mouse Laminectomy Forceps because of their popularity for breaking off
delicate bone during mouse laminectomies.
Dumont 3: Long straight forceps with course tips. Very popular in low magnification procedures or where longer, thicker forceps are needed.
Dumont 4: Straight forceps very similar to the #5 but with broader shanks and a slightly courser tip.
Dumont 5: The most popular style of Dumont straight forceps with fine tips which come in several styles including #55, #5CO, #5SF, #5XL and #5/45.
55: Similar to #5 but with lighter shanks which give the forceps a lighter spring action.
5CO: Similar to #55 but with even finer shanks producing the lightest spring action and longest meeting surface of any Dumont.
5SF: Standard #5 but with the finest tips ever produced by Dumont.
5XL: Similar to #5 but longer.
5/45: Standard #5 but angled 45°.
Dumont 6: Sharply angled forceps with courser tips. Perfect for access to difficult areas.
Dumont 7: Large radius, curved forceps with fine tips. The most popular curved style.
Medical: Available in almost any style. Denotes distinctive ribbing in the handle to maximize grip.
Tip Profiles
FORCEPS
Once you have decided which style Dumont is right for you, choose the right tip profile for your application. While not all styles come in all tip profiles,
below is a guide to help you decide which is right for you. The dimensions of these tips vary with each style. For specific dimensions please see each item.
Standard
The standard Dumont tips are designed for the most exacting work under the microscope.
In general, standard tips are used under magnification up to 20X.
Biologie
The imprint “Biologie” identifies forceps especially produced for the biological sciences. In overall shape and dimension these forceps are identical in
style but have the added feature of tips which are approximately twice as fine.
Dumont’s finest tips
We are frequently asked for the Dumont forceps with the finest tip. These forceps are four times finer than Biologie tipped Dumonts.
Please see page 87 and 91 for these items.
Alloys
Now that you have selected the right style and tip of forceps, you can move on to picking the right alloy for your application.
Carbon
Will stand hard use of the tips but has the disadvantages of staining easily, not being autoclavable, and being highly magnetic.
Inox
Is an alloy which has a certain amount of chromium added to carbon steel. This results in some loss of hardness but offers good stainless qualities.
Inox forceps are magnetic.
Dumoxel
Is a patented Dumont alloy which provides optimal stainless steel features while still retaining adequate hardness. This combination makes it the
most requested type of metal in Dumont forceps. Dumoxel is nonmagnetic.
Titanium
Forceps have several distinct advantages. They are fully corrosion resistant. For instance, salt water is non-reactive to this alloy. Although not as hard
as Inox, it is a more flexible metal. It is also 40% lighter than stainless steel and 100% nonmagnetic.
Dumostar
After years of research and testing, Dumont has developed this advanced alloy for the express purpose of maintaining fine tips. Made of 40% cobalt,
Dumostar is much more durable and elastic than the best stainless steels. It has a very high resistance to corrosive solvents such as sea water and
strong acids and also has a temperature resistance of up to 550°C (1022°F). FST has tested Dumont’s alloys in everyday use by some of our best
customers and found Dumostar forceps to last, on average, four times longer than Dumoxel and Inox. We believe that, despite its higher initial cost,
Dumostar is the most cost effective alloy for the research lab. Dumostar forceps are nonmagnetic.
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
95
®
The Most Finely Executed Points
Produced Anywhere!
Two of the most popular forceps are Nos. 11370-40 and 11370-42. They
have the most finely executed points available on forceps. They are
extremely light and superbly balanced. The spring action is gentle to
provide an extended fatigue-free working period. The shanks are slim for
better visibility and arched in such a way as to extend the maximum force
to the tips. The tips close flat for 6 mm from the points to give a larger
than usual holding area. The tips themselves have been expertly finished
under the microscope at 40x magnification.
Nos. 11399-80 and 11399-87 are extra delicate for precision microsurgery
or dissection. The bottom part, which provides gentle spring action, is
also slim to reduce weight. The grip portion is built up to give the “right”
weight to the fingers. The holes provide a good finger-hold and also help
to reduce weight. The tips have been finished to exceptional fineness
under 40x magnification.
FORCEPS
96
Straight,
MORIA MC40,
11 cm
Curved,
MORIA MC40/B,
11 cm
Straight,
MORIA 9980,
13 cm
Curved,
MORIA 9987,
13 cm
No. 11370-40
No. 11370-42
No. 11399-80
No. 11399-87
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
MORIA FORCEPS
Delicate MORIA Forceps
These forceps are made from a special alloy of Swedish steel to give
them strength, flexibility and lightness. The various patterns are
designed to give added ease of operation. Length, balance, spring
action and type of tip are perfectly matched.
Micro-serrations,
MORIA MC31,
10 cm
Smooth,
MORIA MC31/B,
10 cm
Micro-serrations,
MORIA MC32,
10 cm
Smooth,
MORIA MC32/B,
10 cm
No. 11370-31
No. 11373-12
No. 11370-32
No. 11373-22
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
FORCEPS
The forceps on this page have the
inside tip surfaces either smooth or
with atraumatic micro-serrations.
All tips are 0.5 mm and blunt.
97
®
SuperGrip Forceps
The tips are processed with MicroCrystals®, a method developed
by S&T® to infuse tungsten carbide on stainless steel. The
formation of this ultra-fine coating will guarantee atraumatic
handling of tissue while improving the
grip dramatically. The inset illustrates
the gripping surface similar to a match
head. The recommended use is where
forceps are utilized as needle holders
or when slippery tissues might be
encountered.
Pierse Fixation
Forceps
FORCEPS
Tip width
0.3 mm x 0.25 mm,
straight,
11 cm
No. 00108-11
98
Tip width
0.3 mm x 0.25 mm,
angled 45°,
11 cm
Tip width
0.3 mm x 0.25 mm,
straight,
11 cm
Tip width
0.3 mm x 0.25 mm,
angled 45°,
11 cm
No. 00109-11
No. 00632-11
No. 00649-11
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
For exceptional gripping
power with no damage to
sclera, vascular sheath and
epineurium. Has minute
tissue retention hole of
0.3 mm. behind tips. Flat
gripping surfaces are
0.1 x 0.4 mm.
Straight,
13 cm
No. 18155-13
·
FINESCIENCE.COM
FINE FORCEPS
5
mm
FORCEPS
The platform depicts the
usable area with
“guaranteed” parallel
closure. In this way a
reliable grip on sutures
can be ensured.
Suture Tying
Forceps
Flat handle,
9 mm wide.
Straight,
Tip diameter
0.3 mm
with tying
platform,
13.5 cm
No. 00272-13
Suture Tying
Forceps
with tip of 0.5 mm,
5 mm long tying
platform, with stop to
prevent too much
pressure being
applied,
10 cm
No. 18025-10
Vetro Grasping
Forceps
Serrated,
tip diameter 0.7 mm,
14 cm
No. 11900-14
EVO Forceps
EVO Forceps
Straight,
tip diameter 0.5 mm
15 cm
Curved,
tip diameter 0.5 mm
15 cm
No. 11800-00
No. 11800-01
The EVO Series
An evolutionary series of ergonomic instruments which are
lighter than titanium but still have all the benefits of stainless
steel. The fully fenestrated spring body is designed with a
stability rod to provide balance in your hand.
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
99
®
Tip width
0.5 mm
20x
magnification
Tip width
0.3 mm
Straight,
serrated,
7 cm
No. 11064-07
1x2 teeth,
7 cm
Serrated,
8.5 cm
No. 11084-07
No. 11069-08
Tip width
0.4 mm
Straight,
1x2 teeth,
7 cm
Tip width
0.6 mm
No. 11066-07
10x
magnification
FORCEPS
5
mm
Curved,
serrated,
7 cm
No. 11065-07
Smooth,
7 cm
1x2 teeth,
8.5 cm
No. 11083-07
No. 11070-08
100
USA 1-800-521-2109
Bishop-Harman.
These forceps are provided
with holes in the handles to
make them extra light and to
ensure a good grip. The tips
are 0.5 mm wide, either
delicately rounded with microserrations, or with 1x2 teeth,
angled upward as shown.
Delicate,
smooth tips,
angled 45°,
9 cm
Model “Bonn”.
The 1x2 forceps are by far the
finest of their kind available. The
teeth are only 0.1 mm wide and
fit perfectly into each other. The
smooth version features a very
narrow 5 mm long platform.
No. 11063-07
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
Curved,
1x2 teeth,
7 cm
No. 11067-07
·
FINESCIENCE.COM
FINE FORCEPS
The tips of these forceps
arch toward each other,
closing flat on a surface
1.3 mm wide x 0.2 mm high.
A bar inside the shanks
limits pressure applied.
Exceptional gripping power
is possible with minimal
damage to tissue.
Eye dressing forceps, serrated, tip width 0.8 mm
Straight,
9.5 cm
Curved,
9.5 cm
No. 11040-08
No. 11041-08
Tip width
1 mm
1.3
3
mm mm
Eye tissue forceps, with 1x2 teeth
FORCEPS
0.8 mm
1 mm
Straight,
9.5 cm
Curved,
9.5 cm
No. 11042-08
No. 11043-08
The octagon shaped grip
on these forceps provides
a particularly secure
finger hold for the tough,
yet delicate job.
With sliding lock,
smooth tips, straight,
11 cm
10 cm
No. 11071-10
No. 11062-10
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
101
®
Cover Glass Forceps
Plastic Forceps
These low cost fine plastic forceps are made of Acetyl. They are nonmagnetic, acid resistant and are able to withstand temperatures up
to 464°F (240°C). Tips do not spread under pressure.
Overall Length 11.5 cm
Package of 10.
4 mm
10
mm
5 mm
Round straight,
1.5 mm x 0.40 mm ,
Pkg. of 10
No. 11700-00
No. 11700-03
Sharp curved,
0.30 mm x 0.20 mm,
Pkg. of 10
Round curved,
1.5 mm x 0.40 mm,
Pkg. of 10
No. 11700-01
No. 11700-04
FORCEPS
Sharp straight,
0.40 mm x 0.25 mm,
Pkg. of 10
Angled,
10.5 cm
Straight,
10.5 cm
No. 11073-10
No. 11074-02
Sharp 45°,
0.30 mm x 0.20 mm,
Pkg. of 10
No. 11700-02
102
USA 1-800-521-2109
·
Cross action tissue
transport forceps with
gentle action, closing
flat on 4 mm wide and
8 mm deep. Inside
surfaces are finely
serrated.
10 cm
No. 11075-00
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
S TA N D A R D F O R C E P S
Live Insect
Handling Forceps
Ring Forceps
Ring forceps for transport of
tissue and organs.
FORCEPS
Very delicate live insect handling
forceps of18/8 stainless steel.
1 mm ID, 1.5 mm OD,
with limit screw,
8.5 cm
2.2 mm ID, 3 mm OD,
with limit screw,
9 cm
4.8 mm ID, 6 mm OD,
with limit screw,
9 cm
No. 11101-09
No. 11103-09
No. 11106-09
Narrow,
10 cm
Wide,
10 cm
No. 26029-10
No. 26030-10
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
103
®
Micro-Adson.
Our more delicate version of
the popular Adson forceps,
with tip width of 0.8 mm.
Micro-Adson forceps with fenestrated handle.
Our delicate Micro-Adson forceps, with five
windows to aid in stability and easy finger
adjustments.
Adson forceps.
Wide, strong grip
with narrow,
finely serrated
tips 1.5 mm wide.
Straight,
Serrated,
12 cm
No. 11006-12
1.5 mm
dia.
Straight,
Serrated,
12 cm
FORCEPS
No. 11018-12
Straight,
Serrated,
12 cm
Straight,
1x2 teeth,
12 cm
No. 11020-12
No. 11027-12
Straight,
1x2 teeth,
12 cm
No. 11019-12
Straight,
tungsten carbide
inlaid tip,
12 cm
No. 11506-12
For more information
on tungsten carbide
see page 19.
104
USA 1-800-521-2109
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
S TA N D A R D F O R C E P S
Adson pattern,
straight,
with DeBakey
serrations,
12.5 cm
No. 11617-12
Adson-Brown,
shark teeth,
12 cm
FORCEPS
No. 11627-12
Straight,
with DeBakey
serrations,
15 cm
No. 11616-15
Adson-Graefe tissue forceps.
Good hand grip on a light
forceps; fine sharp teeth
over 4.5 mm width,
12.5 cm
Atraumatic
DeBakey Serrations
No. 11030-12
This tooth pattern, as shown, consists of one row
of atraumatic teeth meshed with two opposite
rows of atraumatic teeth.
These two forceps are ideal for gentle and
atraumatic gripping of vessels, tissue and other
delicate structures.
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
105
®
Eye dressing forceps, serrated, tip width 0.8 mm
Eye dressing forceps, serrated, tip width 0.5 mm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
No. 11150-10
No. 11151-10
No. 11152-10
No. 11050-10
No. 11051-10
No. 11052-10
No. 11049-10
Titanium,
10 cm
Titanium,
10 cm
Titanium,
10 cm
No. 11650-10
No. 11651-10
No. 11652-10
Tip width 1.2 mm
FORCEPS
Eye tissue forceps, 1x2 teeth, tip width 0.5 mm
Eye tissue forceps, 1x2 teeth, tip width 0.8 mm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
No. 11153-10
No. 11154-10
No. 11155-10
No. 11053-10
No. 11054-10
No. 11055-10
Extra Fine Graefe Forceps
Graefe Forceps
This version of the Graefe forceps is similar to the standard
pattern with the exception that it is lighter and finer. The width
of the tips is only 0.5 mm instead of the regular 0.8 mm. They
are well suited for a variety of situations where light, fine,
forceps are required.
The Graefe forceps are one of the most popular forceps for
fine surgical procedures. They have a delicate pattern with
an overall length of 10 cm and 0.8 mm wide tips. Finely
serrated or with fine 1x2 teeth and gentle spring action.
106
USA 1-800-521-2109
·
CANADA 1-800-665-5355
For more
information on
titanium, see
page 5.
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
S TA N D A R D F O R C E P S
Straight
Curved
Straight
Curved
Length
cm
Straight
11008-13
12
11008-15
13
Length
cm
Straight
13
15
15
Narrow pattern.
Forceps have serrated tips 2 mm to
3.6 mm wide depending on length
of instrument. Lighter spring action
than standard pattern for grasping
more delicate tissue.
Price
11608-15
Standard pattern.
Broad pattern forceps with
serrated tips 2.5 mm to 4 mm
wide depending on length of
instrument. Strong spring action.
Straight
Curved
Length
cm
Straight
11002-12
12
11000-12
11002-13
13
11000-13
14.5
11002-14
14.5
11000-14
16
11002-16
16
11000-16
18
11002-18
18
11000-18
20
11002-20
20
11000-20
25
11002-25
25
11000-25
30
11000-30
Length
cm
Curved
Price
For more information on
titanium, see page 5.
14.5
11602-14
Length
cm
Curved
Length
cm
Curved
13
11009-13
12
11003-12
12
11001-12
15
11009-15
13
11003-13
13
11001-13
14.5
11003-14
14.5
11001-14
16
11003-16
16
11001-16
18
11003-18
18
11001-18
20
11003-20
20
11001-20
Price
Price
FORCEPS
Semken.
Forceps are slim patterned with long,
narrow shanks and finely serrated
tips 1.3 mm and 1.7 mm wide. The
spring action is gentle.
Price
Price
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
107
®
3
mm
2 mm
FORCEPS
Length
cm
1x2
Price
2x3
Price
Slim, 1x2
10
108
Price
11023-10
12
11021-12
14.5
11021-14
11022-14
11023-14
15.5
11021-15
11022-15
11023-15
USA 1-800-521-2109
11023-12
·
CANADA 1-800-665-5355
·
GERMANY +49 (0) 62 21 90 50 50
Strong forceps.
Curved, 1x2 teeth, used with
rongeur No. 16021-14 (see page 36)
in laminectomy to securely hold
spinal column,
14 cm
No. 11029-14
·
FINESCIENCE.COM
S TA N D A R D F O R C E P S
6 mm
1.5
mm
11
mm
FORCEPS
2
mm
Gillies.
1x2 teeth, straight,
with serrations,
15 cm
No. 11028-15
Russian.
With special cupped
pattern for
superior grip,
15 cm
Organ holding forceps.
With thumb screw,
14.5 cm
No. 11031-15
No. 11026-15
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
109
®
For more information on
titanium, see page 5.
16
mm
Straight,
18 cm
No. 11014-18
FORCEPS
Curved,
18 cm
No. 11015-18
110
Angled,
16 cm
Straight,
16 cm
No. 11080-02
No. 11602-16
USA 1-800-521-2109
·
CANADA 1-800-665-5355
Gerald Forceps
With serrated, slightly rounded
tips, very narrow shanks to
2.5 cm from tips, and a tip
width of 1.4 mm.
·
GERMANY +49 (0) 62 21 90 50 50
·
FINESCIENCE.COM
S TA N D A R D F O R C E P S
Mouse Handling Forceps
Prevents injuries while handling
small rodents.
Taylor Forceps.
Slim design with tips 1.5 mm wide.
Serrated and smooth versions
available.
Straight,
serrated tips,
17 cm
No. 11010-17
Straight,
with 1x2 teeth,
18 cm
Straight,
serrated,
18 cm
No. 11024-18
No. 11012-18
21 cm
Curved,
serrated tips,
17 cm
No. 11012-21
No. 11011-17
25 cm
FORCEPS
No. 11012-25
Straight,
smooth tips,
17 cm
No. 11016-17
Curved,
smooth tips,
17 cm
Curved,
with 1x2 teeth,
18 cm
Curved,
serrated,
18 cm
No. 11025-18
No. 11013-18
21 cm
No. 11017-17
No. 11013-21
The smooth tipped forceps are easier to
clean than serrated tips, making them
ideal for use in situations where tissue
or paraffin would tend to adhere to
serrations.
Potts-Smith Forceps
serrated, tip width 2 mm x 1.6 mm
80% actual
size
Long handles prevent injury from bites
and make picking up small rodents easy.
Serrated rubber gripping surface
(15 mm x 20 mm) for maximum hold and
minimal trauma.
21 cm
No. 11035-20
PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY · SEE INSIDE FRONT COVER FOR ORDERING INFORMATION
111