Limatherm SensorSp. z o.o.
ul. Tarnowska 1, 34-600 Limanowa
www.limathermsensor.pl
tel.
fax
e-mail
+48 18 337 99 19
+48 18 337 99 10
[email protected]
SENSOR
Temperature transmitters
IPAQ-H, IPAQ-H PLUS, IPAQ-HX
Specification
Characteristic
–universal transmitter
–mounting in connection head BA
–sensor error correction
–monitoring of sensor circuit interruption
–higher accuracy IPAQ+H PLUS
–intrinsically safe IPAQ-HX,
ATEX II 1G Ex ia IIC T4 – T6
Input
RTD 3-, 4-wire
TC B, E, J, K, L,N, R, S, T, U acc. to operating range
Pt100 -200÷1000ºC
Pt1000 -200÷200ºC
Ni100 -60÷250ºC
Ni1000 -10÷150ºC
resistance 0÷2000Ω
voltage -10÷500 mV
Input connections
Połączenia wejściowe:
1
2
3
1
RTD 3-przew.
wire
1
Output
2
RTD
4÷20 mA, 20÷4 mA
4
Measuring range
3
3
4
RTD 4-przew.
wire
4
1
2
3
1
2
-
+
3
4
T/C
4
1
2
3
4
RTD
Różnica temp.
Temperature
difference
–Pt100 min. -10°C
–TC, mV: min. 2 mV
–resistant inputs: min. 10Ω
2
Potencjometr
3-wire
3-przewod.
Potencjometr
4-wire
potentiometer 4-przewod.
potentiometer Połączenia wyjściowe:
Output connections
+
Zero point adjustment
I OUT
in full range
Dimensions[mm]
Accuracy
+
5
6
-
R LOAD
-
Ø33
Ø7
Response time
Ø44
PLUS – 0,05 % H – 0,1% for RTD,mV, resistance
PLUS – 0,1 % H – 0,2% for TC
0,2 s
Galvanic isolation
3750V AC for 1 min PLUS; 1500V AC for 1 min H
26
Max. lead wire resistance
500Ω for the entire TC loop; 25Ω per RTD wire
Lead wire connection
Power supply
6,5÷36V DC; 8÷30V DC Ex version
< 2,5 mm2
Operating conditions
temperature: -40÷85°C
humidity: up to 95% RH non-condensing
Ordering code
Temperature transmitter
IPAQ–H
–
–
Standard: none
Accurate: plus
Ex version: X
Temperature range: (0÷1000)°C or other
Input type: S or other
With adapter for 35mm rail mounting: A
T
166
Ordering example:
Transmitter IPAQ–H PLUS–(0÷1000)ºC–S
Quality Certificate or Calibration Certificate of Limatherm Sensor Accredited Laboratory for Temperature Measurements on request.
–