Sto SE & Co. KGaA Ehrenbachstraße 1 DE-79780 Stühlingen, Germany
Declaration of Performance 01-0162-3
according to CPR No. 305/2011
1/3
Declaration of performance
No. 01-0162-3
for the construction product
StoTherm Mineral 5
1.
Product type
External Thermal Insulation Composite System
2.
Batch number
see the product packaging
3.
Intended use
thermal insulation of external walls
4.
Manufacturer
Sto SE & Co. KGaA, Ehrenbachstr. 1, D-79780 Stühlingen
5.
Authorised person
not relevant
6.
System or systems of evaluation and
verification of constancy of performance
system 1 for the reaction to fire
system 2+ for all other essential characteristics
7.
Notified body
MPA Stuttgart NB 0672
has performed the initial type test on reaction to fire under system 3 and
issued a test- and classification report
WIEN-ZERT NB 1139
carried out an initial inspection of the factory and continuous surveillance,
evaluation and recognition of the factory production control in accordance
with the System 2+ as well as on the basis of ETAG 004 and issued an EC
certificate of conformity.
8.
European Technical Assessment
ETA-13/0901 StoTherm Mineral 5
Sto SE & Co. KGaA Ehrenbachstraße 1 DE-79780 Stühlingen, Germany
Declaration of Performance 01-0162-3
according to CPR No. 305/2011
2/3
9.
Declared performance
Essential characteristics
Performance
Harmonised technical
specification
Reaction to fire
A2-s1,d0 to B-s2,d0
(according to system configuration)
EN 13501-1:2010
Water absorption
(Base coat with Finishing coat)
< 0,5 kg/m² (10 variants)
> 0,5 kg/m² (1 variant)
ETAG 004:2000
Impact resistance
Category I bis II
(according to system configuration)
ETAG 004:2000
Water vapour permeability
≤ 1,0 m
ETAG 004:2000
Release of dangerous substances
-
in accordance to guidance
paper „H“ (Aug. 2002)
Bond strength between base coat and insulation
product
≥ 0,08 MPa
ETAG 004: 2000
Bond strength between adhesive and substrate
(concrete)
≥ 0,25 MPa
ETAG 004: 2000
Bond strength between adhesive and insulation
product (MW panel / MW lamella)
≥ 0,08 MPa
ETAG 004: 2000
Hygrothermal behaviour
passed
ETAG 004: 2000
Freeze / thaw behaviour
passed
ETAG 004: 2000
10.
The performance of the product in accordance with nos. 1 and 2 corresponds to the declared performance in accordance
with no. 9. The manufacturer is solely responsible for compiling this declaration of performance in accordance with no. 4.
Signed for the manufacturer and on behalf of the manufacturer of:
27.11.2015
Sto SE & Co. KGaA D-79780 Stühlingen, Germany
By proxy Dr. Hans Klein / Head of Approvals and Testing Procedures
Sto SE & Co. KGaA Ehrenbachstraße 1 DE-79780 Stühlingen, Germany
Declaration of Performance 01-0162-3
according to CPR No. 305/2011
3/3
Sto SE & Co. KGaA
Ehrenbachstrasse 1
D-79780 Stühlingen, Germany
01-0162-3
13
StoTherm Mineral 5 ETA-13/0901
External Thermal Insulation Composite System
thermal insulation of external walls
Reaction to fire
A2-s1,d0 to B-s2,d0
(according to system configuration)
Water absorption
(Base coat with Finishing coat)
< 0,5 kg/m² (10 variants)
> 0,5 kg/m² (1 variant)
Impact resistance
Category I bis II
(according to system configuration)
Water vapour permeability
≤ 1,0 m
Release of dangerous substances
-
Bond strength between base coat and insulation
product
≥ 0,08 MPa
Bond strength between adhesive and substrate
(concrete)
≥ 0,25 MPa
Bond strength between adhesive and insulation product
(MW panel / MW lamella)
≥ 0,08 MPa
Hygrothermal behaviour
passed
Freeze / thaw behaviour
passed
0672