Elite™ Bathtub/Whirlpool/Heated Soaker
Raised Outlet
Standard Outlet
• 66” x 32” x 19”
• 60” x 32” x 19”
Bathtub Features
• 60” x 30” x 19”
• 60” x 30” x 16”
• 54” x 30” x 19”
Ordering Information
• High gloss acrylic surface for a bright shine.
• Easy to clean, scratch and stain resistant.
• Slip resistant bottom for showering.
•Easy to install for both new construction
and remodel projects.
•Arm rests, head, neck and lumbar support for bathing.
•Reinforced integral apron with brace and gussets.
•Innovative design drains water away from
apron corners.
•Screw flange direct to stud, no T-brace or clips required.
•3” diameter feet, 7/16” O.S.B. and fiberglass
for maximum support.
•Covered with a protective film to maintain
finish during installation.
• 5 Year Consumer, 2 Year Commercial Limited Warranty.
• Meets ANSI and CSA Standards.
Whirlpool Features:
• Factory plumbed ready to install.
• Eight factory installed Jets.
• (Optional) F actory installed in-line heater.
Heated Soaking Bathtub (HST) Features:
• Factory plumbed ready to install.
• One low-pressure port to gently circulate warm water.
•Factory installed in-line heater.
Color Options* (color code replaces “xx” in SKU)
01 - White
02 - Almond
09 - Biscuit
22 - Black
64 - Silver Metallic
Shipping
Weight
Description Dimensions SKU
Elite™
Bathtub
Elite™
Whirlpool
Elite HST
™
66” x 32” x 19”
ETLxx663219 L or R
81 lbs
60” x 30” x 19”
ETLxx603219 L or R
71 lbs
60” x 32” x 19”
ETxx603219 L or R
71 lbs
60” x 30” x 16”
ETxx603016 L or R
68 lbs
54” x 30” x 19”
ETLxx543019L or R
64 lbs
66” x 32” x 19”
EWLxx663219 L or R-yy
92 lbs
60” x 30” x 19”
EWLxx603219 L or R-yy
92 lbs
60” x 32” x 19”
Wxx603219 L or R-yy
90 lbs
60” x 30” x 16”
EWxx603016 L or R-yy
70 lbs
54” x 30” x 19”
EWLxx543019L or R
83 lbs
66” x 32” x 19”
EHSTLxx663219 L or R-yyH
92 lbs
60” x 30” x 19”
EHSTLxx603219 L or R-yyH
92 lbs
60” x 32” x 19”
EHSTxx603219 L or R-yyH
90 lbs
60” x 30” x 16”
EHSTxx603016 L or R-yyH
70 lbs
54” x 30” x 19”
EHSTLxx543019 L or R
83 lbs
Additional Options
Trim Options for jets
(color code replaces “yy” in SKU)
00 Color Matched
01 Chrome
Inline Heater
Factory installed add “H” to end of SKU.
Sold Separately: HTR01
*Colors shown may vary slightly from the actual product due to variations
in the printing process of this document.
3-1/2"
66” x 32” x 19”
(56 gallons*)
8-3/4"
222mm
153⁄16”
15-3/16"
386mm
61-7/16"
31-7/8"
809mm
20"
51-3/8"
8-3/4"
222mm
19"
483mm
20"
508mm
11”
6”
33-1/2”
GFI Electrical
Outlet
8¾”
26-1/8"
15-3/16"
386mm
3-1/2"
31-7/8"
809mm
20"
55-7/16"
65-7/8"
1673mm
45-3/8"
66”
= Stud location
26-1/8"
RH installation shown - reverse for LH installation.
60” x 32” x 19”
(60 gallons*)
3-1/2"
8-3/4"
222mm
19"
483mm
20"
508mm
153⁄16”
15-3/16"
386mm
31-7/8"
809mm
20"
55-7/16"
65-7/8"
1673mm
45-3/8"
8-3/4"
222mm
19"
483mm
20"
508mm
11”
6”
33-1/2”
GFI Electrical
Outlet
8¾”
26-1/8"
14-3/16"
360mm
59-7/8"
55-7/16"
1542mm
3-1/2"
29-7/8"
759mm
18"
45-3/8"
60”
24-1/8"
= Stud location
RH installation shown - reverse for LH installation.
3-1/2"
8-3/4"
222mm
60” x 30” x 19”
(45 gallons*)
19"
483mm
20"
508mm
143⁄16”
14-3/16"
360mm
59-7/8"
55-7/16"
1542mm
29-7/8"
759mm
18"
45-3/8"
8-3/4"
222mm
19"
483mm
20"
508mm
11”
6”
31-1/2”
GFI Electrical
Outlet
8¾”
24-1/8"
3-1/2"
29-7/8"
759mm
18"
55-7/16"59-7/8"
1542mm
45-3/8"
14-3/16"
360mm
60”
24-1/8"
= Stud location
RH installation shown - reverse for LH installation.
60” x 30” x 16”
(44 gallons*)
3-1/2"
8-3/4"
20"
222mm 508mm
19"
483mm
143⁄16"
Floor Cut Out (6" x 11")
11"
6"
14-3/16"
360mm
29-7/8"
759mm
18"
55-7/16"
59-7/8"
1542mm
45-3/8"
8-3/4"
222mm
16"
406mm
17"
432mm
*GFI Electrical
Outlet
31½"
8¾"
Drain CL
24-1/8"
60"
3-1/2"
29-7/8"
759mm
18"
14-3/16"
360mm
59-7/8"
49-7/16"
1542mm
39-3/8"
* Optimum GFI receptacle locations. Actual locations may vary
depending on your stud layout.
A second GFI receptacle is required if whirlpool has an in-line heater.
24-1/8"
= Stud location
RH installation shown - reverse for LH installation.
3-1/2"
8-3/4"
222mm
54” x 30” x 19”
(39 gallons*)
16"
406mm
17"
432mm
143⁄16”
14-3/16"
360mm
29-7/8"
759mm
18"
49-7/16"
59-7/8"
1542mm
39-3/8"
20"
508mm
19"
483mm
24-1/8"
11”
6”
GFI Electrical
Outlet
31-1/2”
8¾”
54”
3-1/2"
= Stud location
RH installation shown - reverse for LH installation.
From bottom of overflow to drain
*
20"
508mm
19"
483mm
LYONS INDUSTRIES, INC.
53-7/8"
1368mm
53-7/8"
1368mm
30000 M-62 West
Dowagiac, MI 49047
phone: (800) 458-9036
fax: (269) 782-5159
www.lyonsindustries.com
e-mail: [email protected]
For more information, please visit us at lyonsIndustries.com
Design and features may change without notice.
Complies with ANSI Z124.1 and CAN/CSA-B45
CAN/ULC S102.2 Flame-75 & Smoke Developed-485 code.
Complies with ASME:A112.19.7 and CAN/CSA-B45.10
All product subject to manufacturing tolerance of [+] or [-] 1/8".
Printed in U.S.A.
4200-00160 12/13