GRAIN
BUILDING NOTES:
- GLUE THREAD TO L.E. OF WING
- SAND STAB TO ABOUT 2/3 THICKNESS THEN
ROUND OFF EDGES
- EPOXY (THINNED) CARBON FIBER TOW ON BOTH
SIDES OF THE FUSELAGE
- WRAP CARBON FIBER TOW (WITH THINNED
EPOXY) TO NOSE SECTION OF FUSELAGE
- HATCHED AREAS ON FUSE INDICATES CARBON
FIBER TOW
- DOPE TWICE, SAND ONCE IN BETWEEN COATS
- USE 2 LOOPS OF 1/8” RUBBER FOR
CATAPULT, 7” LONG.
Baby Condor HLG/CLG
8” wingspan indoor funfly
THOMAS LEE. JANUARY 24th 2005
- USE 3/32” #10 A-GRAIN BALSA
- USE 1/16” #4 C-GRAIN BALSA FOR WINGS
- USE 1/32” #5 C-GRAIN BALSA FOR STAB
- USE 1/32” #4 C-GRAIN BALSA FOR FIN (SAND TO
APPROX HALF THICKNESS)
THIN FROM TO WINGTIPS
HIGHPOINT
1”
DIHEDRAL - 3/4” PER WINGTIP
OPTIONAL FINGERHOLD
FOR HLG VERSION (1/8” #10
A-GRAIN BALSA)
0
1”