TOOLING
COMPONENTS
Clamping Kits.................................. 2-5
Step Blocks & Kits........................... 6-7
Driver Studs................................... 8-12
Bolts, Screws............................... 13-19
Nuts, Washers............................. 20-29
Clamps......................................... 30-43
Swivel Screw Clamps.................. 44-46
Screws.......................................... 47-48
Hand Knobs.......................................49
Rest Pads...................................... 50-51
Index Plungers & Bushings......... 52-56
Jig Feet, Rest Buttons................. 57-58
Fixture Keys................................. 59-60
Leveling Pads and Mounts......... 60-62
Ball Bearing Parallels........................63
Thread Repair Inserts.................. 64-68
Collet Stops.......................................69
TOOLING COMPONENTS
Super Clamp Kits
Super Clamp Kits
Metric Kits
Part
No.
Table
T-Slot
Size
English
Kits
Stud
Size
Weight
(lbs/kit)
WITH 25MM THICK STEP BLOCKS
68101 10MM M8 x 1.25
18
68102 12MM M10 x 1.5
18
68103 14MM M10 x 1.5
18
23
68104 14MM M12 x 1.75
68105 16MM M12 x 1.75
23
68106 17MM M12 x 1.75
24
68107 18MM M16 x 2.0
28.3
68108 20MM M16 x 2.0
28.3
WITH 38MM THICK STEP BLOCKS
68110 14MM M12 x 1.75
30
68111 16MM M12 x 1.75
30
68112 17MM M12 x 1.75
30
68113 18MM M16 x 2.0
44.3
68114 20MM M16 x 2.0
44.3
68115 22MM M20 x 2.5
58
See individual components
for material information.
Kit Contains:
•6 Step Blocks
•6 Serrated End Clamps
•4 Coupling Nuts
•4 Flange Nuts
•4 T-Slot Nuts
•1 T-Slot Cleaner
•1 Holder (wooden base,
metal tray)
•Bridgeport type milling
machines use Part Nos. 20206,
20212, 20306 and 20312.
•24 Studs – 4 each of:
– English Kits:
3”, 4”, 5”, 6”, 7” and 8” long.
– Metric Kits:
Kit No. 68101: 80mm, 110mm, 125mm,
150mm, 175mm and 200mm long.
Kit No. 68102-06 & 68110-12:
80mm, 110mm, 140mm, 150mm,
175mm and 200mm long.
Kit No. 68107-08 & 68113-15:
80mm, 110mm, 150mm, 175mm,
200mm and 250mm long.
Steel
Table
Step
Block
Wt.
T-Slot
Stud
Part No. (lbs/kit)
Size
Size
WITH 1” THICK STEP BLOCKS
20201
18
3/8
5/16-18
20202
18
7/16
3/8-16
20203
18
1/2
3/8-16
20204
18
9/16
3/8-16
20205
23
9/16
1/2-13
20206
23
5/8
1/2-13
20207
24
11/16
1/2-13
20208
28.3
11/16
5/8-11
20209
28.3
3/4
5/8-11
20210
28.3
13/16
5/8-11
WITH 1-1/2” THICK STEP BLOCKS
20211
30
9/16
1/2-13
20212
30
5/8
1/2-13
20213
30
11/16
1/2-13
20214
44.3
11/16
5/8-11
20215
44.3
3/4
5/8-11
20216
44.3
13/16
5/8-11
20217
58
13/16
3/4-10
20218
58
7/8
3/4-10
20219
58
1
3/4-10
20222
59
1-1/16
3/4-10
WITH 2” THICK STEP BLOCKS
20220*
90
1
7/8-9
20221*
99
1-1/16
1-8
* Kits shipped in all wooden holders
English Kit is included in the
Expanded Clamp Kit (Part Nos.
21502-21510 – see page 4)
View contents of kits at www.te-co.com
Punch
Press Kits
Super Clamp
Kits
With Clamps
See individual components
for material information.
Part
No.
Stud
Size
Clamps
4 Each
Weight
Kit Contains:
20701
20702
20703
20704
3/8-16
1/2-13
5/8-11
3/4-10
30801
30802
30803
30804
12
16
21
28
•4 Coupling Nuts
•8 Flange Nuts
•4 Step Clamps
•24 Studs - 4 each of
3”, 4”, 5”, 6”, 7”
and 8” long.
•1 Holder
Punch Press Kit shown
with clamps (optional).
2
(lbs/kit)
Without Clamps
Part
No.
Stud
Size
Weight
20710
20711
20712
20713
20715
20716
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
9.5
13
17
22.75
30
39
(lbs/kit)
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Super
Kits
T-Nut &Clamp
Stud Kits
English Kits
See individual components
for material information.
Part
No.
20601
20602
20603
20604
20605
20606
20607
20608
20609
20610
20611
20612
20613
20618
20614
20615
20616
20617
Kit Contains:
•4 Flange Nuts
•4 T-Slot Nuts
•1 T-Slot Cleaner
•24 Studs – 4 each of
– English Kits: 3”, 4”, 5”,
6”, 7” and 8” long.
– Metric Kits:
Kit No. 68201-06: 80mm,
110mm, 140mm, 150mm,
175mm and 200mm long.
Kit No. 58207-09: 80mm,
110mm, 150mm, 175mm,
200mm and 250mm long.
•1 Holder (wooden base, metal tray)
•Bridgeport type milling machines
use Part No. 20606.
•English Kit is included in the Milling
Machine Clamp Kit (see below).
Table
T-Slot
Size
Stud
Size
Weight
3/8
7/16
1/2
9/16
9/16
5/8
11/16
11/16
3/4
13/16
13/16
7/8
1
1-1/16
1
1-1/16
1-1/8
1-1/16
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
7/8-9
1-8
8
8
8
8
12
12
13
16.3
16.3
16.3
24
24
24
25
30
30
30
39
(lbs/kit)
Metric Kits
Part
No.
68201
68202
68203
68204
68205
68206
68207
68208
68209
Versatility is expanded when
used with Step Block & Clamp Kit (see page 6).
Table
T-Slot
Size
Stud
Size
Weight
10MM
12MM
14MM
14MM
16MM
17MM
18MM
20MM
22MM
M8 x 1.25
M10 x 1.5
M10 x 1.5
M12 x 1.75
M12 x 1.75
M12 x 1.75
M16 x 2.0
M16 x 2.0
M20 x 2.5
8
8
8
12
12
13
16.3
16.3
24
(lbs/kit)
View contents of kits at www.te-co.com
Super
KitsClamp Kits
MillingClamp
Machine
See individual components
for material information.
Kit Contains:
•4 Soft Clamps – 6” long
•4 Coupling Nuts
•4 Flange Nuts
•4 T-Slot Nuts
•1 T-Slot Cleaner
•24 Studs with flats – 4 each of
3”, 4”, 5”, 6”, 7” and 8” long
•1 Holder (wooden base, metal tray)
•Bridgeport type milling machines
use Part No. 20506
Part No.
Table
T-Slot
Stud
Size
Size
0501
2
20502
20503
20504
20505
20506
20507
20508
20509
20510
20511
20512
20513
3/8
7/16
1/2
9/16
9/16
5/8
11/16
11/16
3/4
13/16
13/16
7/8
1
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
Clamps
6” Long 4 Each
Weight
(lbs/kit)
30701
30701
30701
30701
30702
30702
30702
30703
30703
30703
30704
30704
30704
12
14
14
14
19
19
19
25
25
25
30
30
30
Versatility is expanded when used
with Step Block Kit (see page 6).
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
3
TOOLING COMPONENTS
Machinist Clamp Kits
Super Clamp Kits
52-piece Kit Contains:
•4 Coupling Nuts
•6 Flange Nuts
•6 T-Slot Nuts
•1 T-Slot Cleaner
•24 Studs – 4 each of:
– English Kits: 3”, 4”, 5”,
6”, 7” and 8” long.
– Metric Kits: 80mm,
110mm, 125mm, 150mm,
175mm and 200mm long.
•6 Step Blocks
•6 Serrated End Clamps
•1 Holder
•Bridgeport type milling machines use Part No. 20402
See individual components
for material information.
English Kits
Part
Wt.
No.
(lbs/kit)
Metric Kits
Part
Wt.
No.
(lbs/kit)
Table
T-Slot
Size
Stud
Size
WITH 25MM THICK STEP BLOCKS
68001 18.5
12MM M10 x 1.5
68002 18.5
14MM M10 x 1.5
68003
24
14MM M12 x 1.75
68004
24
16MM M12 x 1.75
68005
24
17MM M12 x 1.75
68006
29
18MM M16 x 2.0
68007
29
20MM M16 x 2.0
WITH 1” THICK
20412
18.5
20413
18.5
20414
18.5
20401
24
20402*
24
20403
24
20404**
24
20415
29
20416
29
20417
29
Table
T-Slot
Size
Stud
Size
STEP BLOCKS
7/16
3/8-16
1/2
3/8-16
9/16
3/8-16
9/16
1/2-13
5/8
1/2-13
11/16
1/2-13
5/8
1/2-13
11/16
5/8-11
3/4
5/8-11
13/16
5/8-11
*Comes with t-nut part #41410 (pg. 21)
**Comes with t-nut part #41411 (pg. 21)
View contents of kits at www.te-co.com
Expanded Clamp Kits
Part
No.
Kit Contains:
•4 Soft Clamps
•4 Step Clamps
See individual
•6 Plain Clamps
components
for
•4 Coupling Nuts
material
information.
•4 Flange Nuts
•4 T-Slot Nuts
•1 T-Slot Cleaner
•6 Step Blocks
•6 Serrated End Clamps
•24 Studs with flats – 4 each of 3”, 4”,
5”, 6”, 7” and 8” long.
•1 holder (wood base w/2 metal holders)
4
Table
T-Slot
Size
Stud
Size
Soft
Clamps
4 Each
Step
Clamps
4 Each
21502 7/16
3/8-16
30701
30801
21502 7/16
3/8-16
30701
30801
21503
1/2
3/8-16
30701
30801
21503
1/2
3/8-16
30701
30801
21504 9/16
3/8-16
30701
30801
21504 9/16
3/8-16
30701
30801
21505 9/16
1/2-13
30702
30802
21505 9/16
1/2-13
30702
30802
21506
5/8
1/2-13
30702
30802
21506
5/8
1/2-13
30702
30802
21507 11/16
1/2-13
30702
30802
21507 11/16
1/2-13
30702
30802
21508 11/16
5/8-11
30703
30803
21508 11/16
5/8-11
30703
30803
21509
3/4
5/8-11
30703
30803
21509
3/4
5/8-11
30703
30803
21510 13/16
5/8-11
30703
30803
21510 13/16
5/8-11
30703
30803
Plain
Clamps
2 each
Wt.
(lbs/kit)
30401
30402
32
30403
30401
30402
32
30403
30401
30402
32
30403
30404
30405
38
30406
30404
30405
38
30406
30404
30405
38
30406
30407
30408
48
30409
30407
30408
48
30409
30407
30408
48
30409
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
SuperClamp
ClampKits
Kits
Basic
See individual components
for material information.
Kit Contains:
•14 Clamps
• Holder (metal tray)
Versatility is expanded when used
with the T-Nut & Stud Kit (see page 3).
Serrated
Plain
Step
Part End Clamps Clamps Clamps Stud Wt.
No.
2 Each
2 Each 2 Each Size (lbs/kit)
20901
20902
20903
30501
30502
30503
30504
30505
30506
30507
30508
30509
30401
30402 30801 3/8-16
30403
30404
30405 30802 1/2-13
30406
30407
30408 30803 5/8-11
30409
11
13
15
View contents of kits at www.te-co.com
Jig Bore Kit
See individual components for material information.
•For jig borers and jig grinders
•Will clamp anything within the range of the machine
•Aluminum heel rests prevent marring of the table top surface
•Hex bolts in clamps and coupling nuts allow adjustment of
height within the range of the machine
•Clamps, t-bolts, studs, coupling nuts and flange nuts have
a black oxide finish
•Includes holder (wooden base, metal tray)
•For detailed information on the aluminum heel rest and
hex bolt, see page 7.
•For detailed clamp information, see page 8.
Coupling
Single
Part Stud
Stud
Nut
“U” Clamp Toe Clamp Hex Bolt
T-Bolt
No.
Size
4 Each 4 Each
4 Each
4 Each
4 Each
4 Each
Flange
Nut
20 Each
Heel
Rest
4 Each
1401 3/8-16 40520
2
41503
30001
30820
45101
46215, 46216
41603
40215
30002
30821
46216, 46217
40216
46218, 46219
40217
Visit us online at www.te-co.com
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
5
TOOLING COMPONENTS
Step Block Kits
English
Kit Contains:
•10 Step Blocks
•1 Holder
•Blocks work in conjunction
with Serrated End Clamps
(see page 37)
•Two halves = One Block
Part
No.
20801
20805
20807
4
Each
4
Each
2
Each
Weight
40102
40105
40108
40103
40106
40109
40104
40107
40110
8
33
40
4
Each
4
Each
2
Each
Weight
40103M
40106M
40109M
40104M
40107M
40110M
8
33
40
Metric
Part
No.
Versatility is expanded when used
with the T-Nut & Stud Kit (see page 3).
20801M 40102M
20805M 40105M
20807M 40108M
View contents of kits at www.te-co.com
Step Block & Clamp Kits
See individual components
for material information.
Versatility is expanded
when used with the
T-Nut & Stud Kit
(Part No.’s
20601-18,
68202-09,
see page 3).
Kit Contains:
•6 Step Blocks
•6 Serrated End Clamps
•1 Holder
English
Steel
Step
Step
Block
Wt.
Blocks
Stud
Part No. (lbs/kit)
2 Each
Size
Serrated
End
Clamps
2 Each
WITH 1” THICK STEP BLOCKS
40102
5/16
30501
21001
10
40103
or
30502
40104
3/8
30503
40102
30504
21002
11
40103
1/2
30505
40104
30506
40102
30507
21003
12
40103
5/8
30508
40104
30509
WITH 1-1/2” THICK STEP BLOCKS
40105
30504
21004
27
40106
1/2
30505
40107
30506
40105
30507
21005
28
40106
5/8
30508
40107
30509
40105
30510
21006
34
40106
3/4
30511
40107
30512
WITH 2” THICK STEP BLOCKS
40108
7/8
30513
*21007
60
40109
or
30514
40110
1
30515
Metric
Steel
Step
Block
Wt.
Part No. (lbs/kit)
Step
Blocks Stud 2 Each
Size
Serrated
End Clamps
2 Each
WITH 25MM THICK STEP BLOCKS
40102M
30501M
21001M
10
40103M
M10 x 1.5
30502M
40104M
30503M
21002M
11
40102M
40103M M12 x 1.75
40104M
30504M
30505M
30506M
40102M
30507M
21003M
12
40103M
M16 x 2.0
30508M
40104M
30509M
WITH 38MM THICK STEP BLOCKS
21004M
27
40105M
40106M M12 x 1.75
40107M
30504M
30505M
30506M
21005M
28
40105M
40106M
M16 x 2.0
40107M
30507M
30508M
30509M
21006M
34
40105M
40106M
M20 x 2.5
40107M
30510M
30511M
30512M
*Kits furnished with flatboard holder
6
(lbs/kit)
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
(lbs/kit)
TOOLING COMPONENTS
Step Blocks
•Larger sizes have chamfered
holes for ease of use
•Blocks work in conjunction with
Serrated End clamps (see page 36)
•Two halves = One Block
A
B
A
B
English
Steel
Part
No.
Metric
Steel
Part
No.
40102M
40103M
40104M
Wt.
(lbs/100
Height
pcs.)
Adj. Range
A
WITH 25MM THICK STEP BLOCKS
21
19MM to 41MM 1-1/16
49
29MM to 64MM 1-39/64
203
64MM to 152MM 3-3/4
B
11/16
1-1/16
2-15/32
WITH 38MM THICK STEP BLOCKS
40105M
40106M
40107M
174
305
506
45MM to 102MM 2-17/32
64MM to 152M
3-3/4
89MM to 229MM 5-21/64
1-43/64
2-15/32
3-7/16
WITH 51 MM THICK STEP BLOCKS
40108M
40109M
40110M
230
400
670
45MM to 102MM 2-17/32
64MM to 152MM 3-3/4
89MM to 229MM 5-21/64
1-43/64
2-15/32
3-7/16
*Indicates chamfered holes
Wt.
(lbs/100
Height
pcs.)
Adj. Range
A
B
WITH 1” THICK STEP BLOCKS
40102
40103
40104*
21
49
203
3/4 to 1-5/8
1-1/8 to 2-1/2
2-1/2 to 6
1-1/16
1-39/64
3-3/4
11/16
1-1/16
2-15/32
WITH 1-1/2” THICK STEP BLOCKS
40105
40106*
40107*
174
305
506
1-3/4 to 4
2-1/2 to 6
3-1/2 to 9
2-17/32
3-3/4
5-21/64
1-43/64
2-15/32
3-7/16
WITH 2” THICK STEP BLOCKS
40108
40109*
40110*
40111
230
400
670
2115
1-3/4 to 4
2-17/32
2-1/2 to 6
3-3/4
3-1/2 to 9
5-21/64
4-7/8 to 10-1/2
7-3/8
1-43/64
2-15/32
3-7/16
4-3/4
Hex Bolt Part No. 45101
Aluminum Heel Rest
Black Oxide Finish
•Heel Rests prevent marring of
the table top surface
•Material: Aluminum
Stud Part No. 40520
Part
No.
Stud
Size
0215
4
40216
40217
0.375
0.875
1.875
T-Bolt
•Thread Class 2A UNC
•Material: Medium
Carbon Alloy Steel
•Black Oxide
Finish, Heat
Treated
Part
No.
•Black Oxide Finish
•Material: 1045 Steel
6215
4
46216
46217
46218
46219
A
B
1.88
2.50
3.50
4.50
6.00
1.00
1.75
1.75
1.75
1.75
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
7
TOOLING COMPONENTS
“U” Clamp
•Included in jig bore kit (page 5)
•Material 1018 Steel
•Black Oxide Finish
•Case Hardened
Part No.
A
B
30001
30002
2.00
3.00
0.656
1.656
Single Toe Clamp
•Included in jig bore kit (page 5)
•Material 1018 Steel
•Black Oxide Finish
•Case Hardened
A
B
2.75
3.50
0.688
1.438
Threaded Rod
Stainless Steel Driver Studs
•Black Oxide Finish
•Medium Carbon Steel
•Material: 303 Series
Stainless Steel
•Rolled Threads
8
Part No.
30820
30821
Part No.
A
B
45170
45171
45172
45173
45174
45175
45176
45177
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1 ft.
1 ft.
1 ft.
1 ft.
1 ft.
1 ft.
1 ft.
1 ft.
45160
45161
45162
45163
45164
45165
45166
45167
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
3 ft.
3 ft.
3 ft.
3 ft.
3 ft.
3 ft.
3 ft.
3 ft.
45150
45151
45152
45153
45154
45155
45156
45157
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
6 ft.
6 ft.
6 ft.
6 ft.
6 ft.
6 ft.
6 ft.
6 ft.
Part
No.
Thread
A
B
C
40374
40376
40378
1/4-20
1/4-20
1/4-20
3.00
4.00
5.00
1.00
1.00
1.00
40474
40476
5/16-18
5/16-18
3.00
4.00
1.00
1.13
40574
40576
40578
40580
40584
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3.00
4.00
5.00
6.00
8.00
1.13
1.25
1.25
1.25
1.25
40785
40787
40789
40793
1/2-13
1/2-13
1/2-13
1/2-13
4.00
5.00
6.00
8.00
1.50
1.50
1.50
1.50
40876
40878
40880
40884
5/8-11
5/8-11
5/8-11
5/8-11
4.00
5.00
6.00
8.00
1.75
1.75
1.75
1.75
40971
40973
40977
40981
40983
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3.00
4.00
6.00
8.00
10.00
1.25
1.75
2.00
2.00
2.00
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Driver Studs
•Black Oxide Finish
•Tensile Strength: 125,000 p.s.i. min
•Medium Carbon Steel
•Most studs have wrench flats
•Special lengths and sizes quoted upon request
Part
No.
Thread
A
B
C
Weight
Flats (lbs/100pcs)
40301
40302
40303
40304
40305
40306
40307
40308
40309
40310
40311
40312
40313
40314
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
1/2
3/4
1
1
1
1
1
1
1
1
1
1
1
1
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
2
3
3
4
4
5
6
6
7
8
8
9
9
10
40401
40402
40403
40404
40405
40406
40407
40408
40409
40410
40411
40412
40413
40414
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
1/2
3/4
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
3
4
5
6
7
8
9
10
11
12
13
14
16
16
40501
40502
40503
40504
40505
40506
40507
40508
40509
40510
40511
40512
40513
40514
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
1/2
3/4
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
4
6
8
10
12
13
16
18
21
23
25
27
29
31
Part
No.
Thread
A
B
C
Weight
Flats (lbs/100pcs)
40601
40602
40603
40604
40605
40606
40607
40608
40609
40610
40611
40612
40613
40614
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
7/16-14
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
1/2
3/4
1
1
1-1/4
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
5
8
10
13
15
18
20
23
25
28
30
33
35
38
40701
40702
40703
40704
40705
40706
40707
40708
40709
40710
40711
40712
40713
40714
40715
40716
40717
40718
40719
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
9
10
12
14
16
1/2
3/4
1
1
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
NO
NO
NO
YES
YES YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
7
9
12
14
17
19
22
24
27
29
32
34
37
39
44
49
59
69
79
40801
40802
40803
40804
40805
40806
40807
40808
40809
40810
40811
40812
40813
40814
40815
40816
40817
40818
40819
40820
40821
40822
40823
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
9
10
12
14
16
18
20
22
24
1/2
3/4
1
1
1-1/4
1-1/2
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES YES
YES
YES
YES
YES
YES
YES
12
16
19
23
27
31
34
38
42
46
49
53
57
61
68
76
91
106
121
136
161
176
201
(Driver Studs continued on page10)
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
9
TOOLING COMPONENTS
Driver Studs (continued)
10
Part
No.
Thread
A
40901
40902
40903
40904
40905
40906
40907
40908
40909
40910
40911
40912
40913
40914
40915
40916
40917
40918
40919
40920
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
41001
41002
41003
41004
41005
41006
41007
41008
41009
41010
41011
41012
41013
41014
41015
41016
41017
41018
41019
41020
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
Weight
Flats (lbs/100pcs)
Part
No.
3
1
3-1/2 1-1/4
4
1-1/2
4-1/2 1-3/4
5
2
5-1/2
2
6
2
6-1/2
2
7
2
7-1/2
2
8
2
9
2
10
2
12
2
14
2
16
2
18
2
20
2
22
2
24
2
YES
YES YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
32
38
43
49
54
60
66
71
77
83
88
99
111
133
156
178
201
223
246
268
41101
41102
41103
41104
41105
41106
41107
41108
41109
41110
41111
41112
41113
41114
41115
41116
41117
41118
41119
41120
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
9
10
12
14
16
18
20
22
24
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
43
49
56
62
78
84
88
97
103
109
116
128
141
166
191
216
241
266
291
316
B
C
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
Thread
A
B
C
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
9
10
12
14
16
18
20
22
24
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
Weight
Flats (lbs/100pcs)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
58
67
76
86
95
104
114
123
133
142
151
170
189
226
264
301
339
376
414
451
May Be Used With:
•T-Nuts, see pgs. 20-22
•Flange Nuts, see pgs. 22-24
•Flat Washers, see pgs. 26-27
•Spherical Washers, see pgs. 28-29
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Driver Studs – Various Thread Lengths
•Black Oxide Finish
•Medium Carbon Steel
•Special lengths & sizes quoted upon request
•Metric studs dimensioned in millimeters
Metric
Part
No.
English
Thread
A
B
C
D
60251
60252
60253
60254
60255
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
50
65
80
95
110
20
20
27
27
31
12
12
12
12
12
60351
60352
60353
60354
60355
60356
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
50
65
80
95
110
140
20
20
27
31
31
35
12
12
12
12
12
12
60451
60452
60453
60454
60455
60456
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
50
65
80
95
110
140
20
20
27
31
35
35
16
16
16
16
16
16
60551
60552
60553
60554
60555
60556
60557
60558
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
50
65
80
95
110
140
175
200
20
20
27
31
39
39
39
39
16
16
16
16
16
16
16
16
60651
60652
60653
60654
60655
60656
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
80
110
150
175
200
250
21
47
47
47
47
47
18
18
18
18
18
18
60751
60752
60753
60754
60755
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
80
110
150
175
200
27
47
55
55
55
20
20
20
20
20
60851
60852
M24 x 3.0
M24 x 3.0
160
300
100
100
35
35
Part
No.
Thread
A
B
C
D
40350
40351
40352
40353
40354
40355
40356
40357
40358
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1.50
2.00
2.50
3.00
4.00
5.00
6.00
7.00
8.00
0.88
1.00
1.00
1.50
1.75
1.75
2.00
2.00
2.50
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
40450
40451
40452
40453
40454
40455
40456
40457
40458
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
1.50
2.00
2.50
3.00
4.00
5.00
6.00
7.00
8.00
0.75
1.00
1.00
1.50
1.50
1.75
2.00
2.00
2.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
40550
40551
40552
40553
40554
40555
40556
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1.50
2.00
3.00
4.00
5.00
6.00
8.00
0.63
1.00
1.50
1.50
1.75
2.00
2.50
0.63
0.63
0.63
0.63
0.63
0.63
0.63
40770
40771
40772
40773
40774
40775
40776
40777
40778
40779
40780
40781
40782
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1.50
2.00
3.00
4.00
5.00
5.50
6.00
6.50
7.00
8.00
9.00
10.00
12.00
0.63
1.00
1.50
1.50
1.75
1.75
2.00
2.00
2.00
2.50
2.50
3.00
3.00
0.63
0.63
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
Part
No.
Thread
A
B
C
D
40850
40851
40852
40853
40854
40855
40856
40857
40858
40859
40860
40861
40862
40863
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
2.00
2.50
3.00
4.00
5.00
5.50
6.00
6.50
7.00
8.00
9.00
10.00
12.00
14.00
1.00
1.00
1.50
1.75
1.75
2.00
2.00
2.00
2.00
2.50
2.50
2.50
3.00
3.00
0.63
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
40950
40951
40952
40953
40954
40955
40956
40957
40958
40959
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
12.00
14.00
1.50
1.75
1.75
2.00
2.00
2.50
2.50
2.50
3.00
3.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
41050
41051
41052
41053
41054
41055
41056
41057
41058
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
12.00
1.00
1.75
1.75
2.00
2.50
2.50
3.00
3.00
3.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
41150
41151
41152
41153
41154
1-8
1-8
1-8
1-8
1-8
4.00
5.00
6.00
8.00
12.00
1.75
1.75
2.00
2.50
3.00
1.50
1.50
1.50
1.50
1.50
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
11
TOOLING COMPONENTS
Metric Studs
•Black Oxide Finish
•Tensile Strength: 125,000 p.s.i. min.
•Medium Carbon Steel
•Dimension in millimeters.
•Special lengths and sizes quotedupon request
Part
No.
12
Thread
A
B
C
(lbs/100pcs)
Weight
60201
60202
60203
60204
60206
60208
60210
60211
60213
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
50
65
80
95
110
140
150
175
200
20
20
27
27
31
35
35
35
35
2
2.7
3
4
5
6
7
8
9
60301
60302
60303
60304
60306
60308
60310
60311
60313
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
M8 x 1.25
50
65
80
95
110
140
150
175
200
20
20
27
31
31
35
35
35
35
4
5
6
8
9
11
12
13
16
60401
60402
60403
60404
60406
60407
60408
60410
60411
60413
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
M10 x 1.5
50
65
80
95
110
125
140
150
175
200
20
20
27
31
35
35
35
35
35
35
6
8
9
11
13
15
17
19
21
24
60501
60502
60503
60504
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
50
65
80
95
20
20
27
31
8
11
13
15
Part
No.
Thread
A
B
C
(lbs/100pcs)
Weight
60506
60507
60508
60510
60511
60513
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
M12 x 1.75
110
125
140
150
175
200
39
39
39
39
39
39
18
21
24
26
30
35
60603
60604
60606
60607
60609
60611
60613
60615
60616
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
M16 x 2.0
80
95
110
125
150
175
200
250
300
21
31
47
47
47
47
47
47
47
24
29
33
38
48
55
63
80
96
60703
60704
60706
60707
60709
60711
60713
60715
60716
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
M20 x 2.5
80
95
110
125
150
175
200
250
300
27
31
47
55
55
55
55
55
55
38
45
51
58
72
84
97
124
148
60805
60807
60809
60811
60813
60815
60816
M24 x 3.0
M24 x 3.0
M24 x 3.0
M24x 3.0
M24x 3.0
M24 x 3.0
M24 x 3.0
100
125
150
175
200
250
300
39
55
63
63
63
63
63
69
82
100
120
137
175
213
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Heavy Duty T-Slot Bolts –
4140 Steel
•Black Oxide Finish
•4140 Steel
•T-Slot Bolt head is undersized to fit machine
table slot
•Thread Class 2A UNC
•Special lengths and sizes quoted upon request
Part
No.
Thread
A
B
C
D
E
F
Table
Slot
(lbs/100pcs)
45458
45459
45469
45460
45470
45461
45462
45463
45464
45471
45465
45466
45467
45468
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3-1/2
4
4-1/2
5
6
8
9
3/4
1
1
1
1
1-1/4
1-1/2
1-1/2
1-1/2
2
2
2
2
2
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
45560
45569
45561
45570
45562
45563
45564
45571
45565
45566
45572
45567
45568
45573
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
6
7
8
10
12
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
3
3
3
3
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
45659
45660
45661
45662
45668
45663
45669
45664
45665
45666
45667
45670
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
8
10
12
7
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
3
3
3
45760
45761
45762
45763
45764
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
4
5
6
7
8
45858
45866
45859
45860
45861
45862
45863
45864
45865
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
3-1/2
4-1/2
4
5
6
8
7
10
12
Weight
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
15
15
16
17
18
19
22
23.5
26.5
30
32
39
48
54
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
29
31
33
35
37
42
45
50
53
61
70
75
96
114
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
56
58
64
69
76
81
90
117
93
143
166
107
2
2
2
2
2
9/16
9/16
9/16
9/16
9/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
7/8
7/8
7/8
7/8
7/8
99
115
132
149
166
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
1
1
1
1
1
1
1
1
1
135
160
150
165
188
231
210
274
319
T-Slot Cleaner Part No. 50101
•This 1” wide t-slot cleaner allows for easy
removal of chips from the machine table
•Made of steel for durability
•Weight per 100 pcs. = 11.3 lbs.
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
13
TOOLING COMPONENTS
Tugger® T-Slot Bolts
•Black Oxide Finish
•Medium Carbon Steel
•T-Slot Bolt head is undersized to fit machine table slot
•Thread Class 2A UNC
•Special lengths and sizes quoted upon request
14
Part
No.
Thread
A
B
C
D
E
F
45203
45205
45207
45209
45210
45211
45212
45213
45214
45215
45216
45217
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1-1/2
1
3/16 11/16 13/16
2
1-1/2 3/16 11/16 13/16
2-1/2
2
3/16 11/16 13/16
3
2
3/16 11/16 13/16
3-1/2
2
3/16 11/16 13/16
4
2
3/16 11/16 13/16
4-1/2
2
3/16 11/16 13/16
5
2
3/16 11/16 13/16
5-1/2
2
3/16 11/16 13/16
6
2
3/16 11/16 13/16
7
2
3/16 11/16 13/16
8
2
3/16 11/16 13/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7
8
10
11
12.5
14
15
17.5
19
20
23
26
45402
45404
45406
45408
45409
45410
45411
45412
45413
45414
45415
45416
45417
45418
45419
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1-1/2
1
2
1-1/2
2-1/2
2
3
2
3-1/2
2
4
2
4-1/2
2
5
2
5-1/2
2
6
2
7
2
8
2
9
2
10
2
12
2
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
14
17
19
22
23.5
26.5
29
32
35
39
70
48
54
59
71
45501
45502
45504
45506
45507
45508
45509
45510
45511
45512
45513
45514
45515
45516
45517
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
1-1/2
1 11/32 1-1/8 1-5/16
2
1-1/2 11/32 1-1/8 1-5/16
2-1/2
2 11/32 1-1/8 1-5/16
3
2 11/32 1-1/8 1-5/16
3-1/2
2 11/32 1-1/8 1-5/16
4
2 11/32 1-1/8 1-5/16
4-1/2
2 11/32 1-1/8 1-5/16
5
2 11/32 1-1/8 1-5/16
5-1/2
2 11/32 1-1/8 1-5/16
6
2 11/32 1-1/8 1-5/16
7
2 11/32 1-1/8 1-5/16
8
2 11/32 1-1/8 1-5/16
9
2 11/32 1-1/8 1-5/16
10
2 11/32 1-1/8 1-5/16
12
2 11/32 1-1/8 1-5/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
25
29
33
37
42
45
49
53
57
61
69
75
88
96
114
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Table Weight
Slot (lbs/100pcs)
Part
No.
Thread
A
B
C
D
E
F
45601
45602
45603
45604
45605
45606
45607
45608
45609
45610
45611
45612
45613
45614
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
45701
45702
45703
45704
45705
45706
45707
45708
45709
45710
45711
45712
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
7/8-9
3
4
5
6
7
8
9
10
12
14
16
18
2
2
2
2
2
2
2
2
2
2
2
2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
45801
45802
45803
45804
45805
45806
45807
45808
45809
45810
45811
45812
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
1-8
3
4
5
6
7
8
9
10
12
14
16
18
2
2
2
2
2
2
2
2
2
2
2
2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
2
1-1/2 15/32 1-1/4 1-9/16
2-1/2
2 15/32 1-1/4 1-9/16
3
2 15/32 1-1/4 1-9/16
3-1/2
2 15/32 1-1/4 1-9/16
4
2 15/32 1-1/4 1-9/16
4-1/2
2 15/32 1-1/4 1-9/16
5
2 15/32 1-1/4 1-9/16
5-1/2
2 15/32 1-1/4 1-9/16
6
2 15/32 1-1/4 1-9/16
7
2 15/32 1-1/4 1-9/16
8
2 15/32 1-1/4 1-9/16
9
2 15/32 1-1/4 1-9/16
10
2 15/32 1-1/4 1-9/16
12
2 15/32 1-1/4 1-9/16
Table Weight
Slot (lbs/100pcs)
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
46
52
58
64
69
74
81
86
93
105
117
129
143
166
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
84
99
115
132
149
166
184
199
232
265
300
332
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
2-1/16
1
1
1
1
1
1
1
1
1
1
1
1
123
144
165
188
210
231
252
274
319
360
404
453
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Tugger® T-Slot Bolt Super Clamp Kit
Kit Contains:
•24 T-Slot Bolts
– Short Series: 4 each of 1-1/2”,
2”, 2-1/2”, 3”, 3-1/2” and 4” long
– Long Series: 4 each of 3”, 4”, 5”,
6”, 7” and 8” long
•8 Flange Nuts
•6 Step Blocks
•6 Serrated End Clamps
•1 T-Slot Cleaner
•1 Holder (wooden base/metal tray)
Part T-Slot
Bolt
No.
Size
Length
WITH 1” THICK STEP BLOCKS
21350
3/8
Short
3/8-16
21351
3/8
Long
3/8-16
21352
1/2
Short
1/2-13
21353
1/2
Long
1/2-13
21354
5/8
Short
5/8-11
21355
5/8
Long
5/8-11
WITH 1-1/2” THICK STEP BLOCKS
21356
1/2
Short
1/2-13
21357
1/2
Long
1/2-13
21358
5/8
Short
5/8-11
21359
5/8
Long
5/8-11
21360
3/4
Long
3/4-10
See individual components for material information.
Tugger® T-Slot Bolt Kits
Tugger® T-Slot Bolt /Stud Kits
See individual components
for material information.
See individual components
for material information.
Kit Contains:
Kit Contains:
•24 T-Slot Bolts:
– Short Series: 4 each
of 1-1/2”, 2”,
2-1/2”, 3”, 3-1/2”
and 4 long
– Long Series: 4 each of
3”, 4”, 5”, 6” 7” and 8” long
•8 Flange Nuts
•1 T-Slot Cleaner
•1 Holder
•20 T-Slot Bolts
•4 Studs
•6 Flange Nuts
•4 Coupling Nuts
•1 T-Slot Cleaner
•1 Holder
Part
No.
Thread
Size
21330
1332
2
21334
21331
21333
21335
21336
3/8-16
1/2-13
5/8-11
3/8-16
1/2-13
5/8-11
3/4-10
Table Bolt Slot Series
3/8
1/2
5/8
3/8
1/2
5/8
3/4
4 Each
O.A.L.
Short 1-1/2 thru 4
Short 1-1/2 thru 4
Short 1-1/2 thru 4
Long
3 thru 8
Long
3 thru 8
Long
3 thru 8
Long
3 thru 8
Thread
Size
Part
No.
Thread
Size
Table
Slot
Set Incl. 4 Ea
T-Slot Bolts
Stud
Length
21340
1341
2
21342
21343
21344
3/8-16
1/2-13
5/8-11
3/4-10
1-8
3/8
1/2
5/8
3/4
1
1-1/2”, 2”, 2-1/2”, 3”,4”
2”, 3”, 4”, 5”, 6”
3”, 4”, 5”, 6”, 8”
3”, 4”, 5”, 6”, 8”
4”, 5”, 6”, 8”, 10”
4
5
6
7
8
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
15
TOOLING COMPONENTS
Heavy Duty 4140 Steel T-Bolts
Stainless Steel T-Bolts
•Black Oxide Finish
•4140 Steel
•Thread Class 2A UNC
•Special lengths and sizes quoted upon request
•Material: 304 Stainless Steel
•Special lengths and sizes quoted upon request
16
Part
No.
Thread
A
B
C
D
E
46480
46481
46482
46483
46484
46485
46486
46487
46580
46581
46582
46583
46584
46585
46586
46680
46681
46682
46683
46684
46685
46686
1/2-13 1-1/2
1
5/16 7/8
1/2-13
2
1-1/2 5/16 7/8
1/2-13 2-1/2
2
5/16 7/8
1/2-13
3
2
5/16 7/8
1/2-13
4
2
5/16 7/8
1/2-13
5
2
5/16 7/8
1/2-13
6
2
5/16 7/8
1/2-13
8
2
5/16 7/8
5/8-11
2
1-1/2 13/32 1-1/8
5/8-11 2-1/2
2 13/32 1-1/8
5/8-11
3
2 13/32 1-1/8
5/8-11
4
2 13/32 1-1/8
5/8-11
5
2 13/32 1-1/8
5/8-11
6
2 13/32 1-1/8
5/8-11
8
2 13/32 1-1/8
3/4-10 2-1/2 1-3/4 17/32 1-5/16
3/4-10
3
2 17/32 1-5/16
3/4-10 3-1/2
2 17/32 1-5/16
3/4-10
4
2 17/32 1-5/16
3/4-10
5
2 17/32 1-5/16
3/4-10
6
2-1/2 17/32 1-5/16
3/4-10
8
2-1/2 17/32 1-5/16
Table Weight
Slot (lbs/100pcs)
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
15
17
19
22
28
33
39
50
30
33
38
46
55
63
82
56
59
66
68
81
96
120
Part
No.
Thread
A
B
C
D
E
46260
46261
46262
46263
46264
46265
46266
46267
46460
46461
46462
46463
46464
46465
46466
46467
46468
46469
46560
46561
46562
46563
46564
46565
46566
46567
46568
46569
46660
46661
46662
46663
46664
46665
46666
46667
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
1-1/2
1
1/4 11/16
2
1-1/2 1/4 11/16
2-1/2
2
1/4 11/16
3
2
1/4 11/16
3-1/2
2
1/4 11/16
4
2
1/4 11/16
5
2
1/4 11/16
6
2
1/4 11/16
1-1/2
1
5/16 7/8
2
1-1/2 5/16 7/8
2-1/2
2
5/16 7/8
3
2
5/16 7/8
3-1/2
2
5/16 7/8
4
2
5/16 7/8
5
2
5/16 7/8
6
2
5/16 7/8
7
2
5/16 7/8
8
2
5/16 7/8
2
1-1/2 13/32 1-1/8
2-1/2
2 13/32 1-1/8
3
2 13/32 1-1/8
3-1/2
2 13/32 1-1/8
4
2 13/32 1-1/8
5
2 13/32 1-1/8
6
2 13/32 1-1/8
7
2 13/32 1-1/8
8
2 13/32 1-1/8
10
2 13/32 1-1/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7
9
11
12
13
15
18
21
14
17
18
21
24
27
32
38
43
49
29
32
37
42
45
54
62
72
81
96
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3
3-1/2
4
5
6
7
8
10
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
58
65
67
80
94
106
118
144
2
2
2
2
2
2
2
2
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
Table Weight
Slot (lbs/100pcs)
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Tugger® T-Bolts
•Black Oxide Finish
•Medium Carbon Steel
•Heat Treated
•Thread Class 2A UNC
•Special lengths and sizes quoted upon request
Part
No.
Thread
A
B
C
D
E
46201
46202
46203
46204
46205
46206
46207
46208
46209
46210
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1-1/2
1
2
1-1/2
2-1/2
2
3
2
3-1/2
2
4
2
5
2
6
2
7
2
8
2
46401
46402
46403
46404
46405
46406
46413
46407
46414
46408
46409
46410
46411
46412
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1-1/2
1
5/16
2
1-1/2 5/16
2-1/2
2
5/16
3
2
5/16
3-1/2
2
5/16
4
2
5/16
4-1/2
2
5/16
5
2
5/16
5-1/2
2
5/16
6
2
5/16
7
2
5/16
8
2
5/16
10
2
5/16
12
2
5/16
46501
46502
46503
46504
46505
46506
46513
46507
46514
46508
46509
46510
46511
46512
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
46600
46601
46602
46603
46610
46604
46611
46605
46606
46607
46608
46609
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7
9
11
12
13
15
18
21
25
27
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
14
17
18
21
24
27
30
32
35
38
43
49
59
70
1-1/2
1 13/32 1-1/8
2
1-1/2 13/32 1-1/8
2-1/2
2 13/32 1-1/8
3
2 13/32 1-1/8
3-1/2
2 13/32 1-1/8
4
2 13/32 1-1/8
4-1/2
2 13/32 1-1/8
5
2 13/32 1-1/8
5-1/2
2 13/32 1-1/8
6
2 13/32 1-1/8
7
2 13/32 1-1/8
8
2 13/32 1-1/8
10
2 13/32 1-1/8
12
2 13/32 1-1/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
25
29
32
37
42
45
50
54
59
62
72
81
96
115
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
7
8
10
12
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
56
58
65
67
73
80
90
94
106
118
144
168
2
2
2
2
2
2
2
2
2
2
2
2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Table Weight
Slot (lbs/100pcs)
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
17/32 1-5/16
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
17
TOOLING COMPONENTS
Eye Bolts
Metric sizes manufactured
upon request
•Black Oxide Finish
•ASTM A311 Material
•Thread Class 2A UNC
•Special sizes quoted upon request
•Many sizes conform to TCMAI standards
Part
Thread
No.
A
B
+.001
-.000
C
D
+.000
-.005
E
F
42930
42931
42935
42936
42937
42938
42940
42941
42942
42943
42945
42946
42950
42951
42955
42956
3/16
3/16
1/4
5/16
1/4
5/16
5/16
3/8
3/8
3/8
3/8
3/8
5/8
5/8
3/4
3/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
5/8-11
5/8-11
3/4-10
3/4-10
2
3
3
3
4
4
3
3
3-3/4
5
3-3/4
5
4-1/2
6
4-1/2
6
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
Weight
(lbs/100pcs)
3/4
1-1/4
1-1/2
1-1/2
2
2
1-1/2
1-1/2
2
2-1/2
1-1/2
2
2
2-1/2
2
2-1/2
3.2
4.3
6.9
6.8
8.9
8.6
10.6
10.3
12
16
25
31
44
56
65
83
Latch Swing Bolts
•Black Oxide Finish – steel only
•Case Hardened – steel only
•Material: 12L14 Steel or 303 Stainless Steel
•Thread Class 2A UNC
•Special sizes quoted upon request
•Metric sizes manufactured upon request
•Many sizes conform to TCMAI standards
Steel
Part
No.
43001
43002
43013
43003
43004
43014
43005
43006
43015
43007
43008
43016
43009
43010
43011
43012
18
Stainless
Steel
Thread
Part No.
A
B
43021
43022
43033
43023
43024
43034
43025
43026
43035
43027
43028
43036
43029
43030
43031
43032
+.001
-.000
C
D
1/4-20 1-1/2 1/4
1/4-20 2-1/2 1/4
1/4-20 2-5/8 1/4
5/16-18
2
5/16
5/16-18
3
5/16
5/16-18 3-3/16 5/16
3/8-16 2-1/2 3/8
3/8-16 3-1/2 3/8
3/8-16 3-3/4 3/8
1/2-13 3-1/8 1/2
1/2-13 4-1/8 1/2
1/2-13 4-7/8 1/2
5/8-11 3-1/2 5/8
5/8-11 4-3/4 5/8
3/4-10 4-1/2 3/4
3/4-10
6
3/4
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
+.000
-.005
E
F
G
H
5/16
3/4
1-3/16
5/16 1-1/4 2-3/16
1/4 2-5/16 2-5/16
3/8
1
1-5/8
3/8
1-3/8
2-5/8
5/16 2-13/16 2-13/16
1/2
1-3/8
2
1/2
2
3
3/8 3-5/16
3.38
5/8
1-3/4
2-1/2
5/8
2-1/4
3-1/2
1/2 4-5/16 4-5/16
3/4
1-5/8
2-3/4
3/4
2-1/2
4
7/8
2
3-5/8
7/8
3
3-5/16
Weight
(lbs/100pcs)
1/4
1/4
1/4
5/16
5/16
21/64
3/8
3/8
25/64
1/2
1/2
33/64
5/8
5/8
3/4
3/4
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
3
4.1
5
6
9
9.5
10
14
20
28
30
37
45
55
65
83
TOOLING COMPONENTS
Plain Forged Eye Bolts
•C1030 Material
•Hot Forged
•For safe working load
rating and breaking strength
information, see table below.
Part
No.
Thread
A
43102
43103
43104
43105
3/8-16
1/2-13
5/8-11
3/4-10
B
C
D
Weight
(lbs/100pcs)
1-1/4
1
1-21/32
1-1/2 1-3/16 2-1/16
1-3/4 1-3/8
2-1/2
2
1-1/2 2-13/16
15
25
56
94
Shoulder Forged Eye Bolts
•C1030 Material
•Hot Forged
•For safe working load
rating and breaking strength
information, see table below.
Part
No.
Thread
A
B
C
D
43202
43203
43204
43205
3/8-16
1/2-13
5/8-11
3/4-10
E
F
G
Weight
(lbs/100pcs)
1-1/4
1
1-21/32 11/16 3/16 1-3/16
1-1/2 1-3/16 2-1/16 7/8
1/4 1-13/32
1-3/4 1-3/8
2-1/2 1-1/8 1/4 1-11/16
2
1-1/2 2-13/16 1-1/4 5/16 1-13/16
18
35
75
101
Standard Eyebolt Rated Capacity
Eye Bolt
Plain
Shoulder
Size
Part No. Part No.
Safe
Working
Load
Breaking
Strength
1,300 lbs.
2,400 lbs.
4,000 lbs.
5,000 lbs.
6,300 lbs.
12,000 lbs.
20,000 lbs.
25,000 lbs.
3/8”
1/2”
5/8”
3/4”
43102
43103
43104
43105
43202
43203
43204
43205
Rated capacity is for STRAIGHT LIFTS – angle lifts should be avoided.
If using angle lifts, SHOULDER EYEBOLTS are recommended and
MUST BE USED WITH A STEEL WASHER so they seat on the
shoulder at all times. Load limits are reduced by 75% on angle lifts.
Also see our selection of hoist rings, pages 140-159.
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
19
TOOLING COMPONENTS
T-Slot Nuts
•Black oxide finish, case hardened
•1018 Material
•The last thread is incomplete on T-Slot
Nuts to prevent the stud from turning
through the bottom of the nut.
•Many sizes conform to TCMAI standards
•Special sizes quoted upon request
•Standard package quantity:
– 41401- 41419: 25 pcs.
– 61401- 61413: 25 pcs.
* T-Slot Nuts are undersized to fit machine table slot
** English T-Slot Nut will fit this size metric machine T-Slot.
Inch
Part
No.
Tapped
*English **Metric
Through Thread Table Slot
Table
Part No.
A
B
Slot
C
D
E
F
1401
4
41402
41401T
41402T
1/4-20
1/4-20
5/16
3/8
8MM
10MM
1/4 3/16 9/16
3/8 15/64 9/16
9/16
9/16
1.7
2.5
41403
41433
41434
41403T 5/16-18
41433T 5/16-18
41434T 5/16-18
3/8
7/16
1/2
10MM
12MM
13MM
3/8
1/2
1/2
7/8
7/8
7/8
4.2
5.8
7.7
41404
41405
4
1406
41404T
41405T
41406T
3/8-16
3/8-16
3/8-16
7/16
1/2
9/16
12MM
12MM
15MM
1/2 7/32 11/16 7/8
1/2 9/32 7/8
7/8
5/8 11/32 7/8 1-1/8
5.4
7.3
12.7
41407
4
1408
41407T 7/16-14
41408T 7/16-14
1/2
1/2
13MM
13MM
1/2
3/8
6.8
4.6
1409
4
41410
41411
41412
4
1413
41409T
41410T
41411T
41412T
41413T
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
9/16
5/8
5/8
11/16
3/4
15MM
16MM
16MM
18MM
20MM
5/8 11/32 7/8 1-1/8
5/8 11/32
1
1-1/8
3/4 3/8 1-1/8 1-1/8
3/4 7/16 1-1/8 1-1/4
3/4 15/32 1-1/4 1-1/4
11.4
13.4
16.9
21.3
24.2
1415
4
41416
4
1417
41415T
41416T
41417T
5/8-11
5/8-11
5/8-11
11/16
3/4
13/16
18MM
20MM
21MM
3/4 7/16 1-1/8 1-1/4
3/4 15/32 1-1/4 1-1/4
1 9/16 1-1/4 1-1/2
19
22.2
37
41418
41419
41420
41421
41422
41418T
41419T
41420T
41421T
41422T
3/4-10
3/4-10
3/4-10
3/4-10
3/4-10
13/16
7/8
1
1
1-1/16
21MM
1 9/16
23MM
1 9/16
26MM
1
5/8
26MM 1-1/2 3/4
27MM 1-1/8 11/16
1-1/2
1-1/2
1-3/4
1-3/4
2
33.9
40.5
57.6
84
76.6
41423
41424
41425
4
1429
41423T
41424T
41425T
41429T
7/8-9
7/8-9
7/8-9
7/8-9
1
1-1/16
1-1/8
1-5/16
26MM
1
5/8 1-5/8 1-3/4
27MM 1-1/8 11/16 1-5/8
2
29MM 1-1/2 3/4 1-3/4
2
34MM 1-1/4 15/16
2
2
53.6
71.2
97.6
109
41426
1427
4
41428
4
1430
41426T
41427T
41428T
41430T
1-8
1-8
1-8
1-8
1-1/16
1-1/8
1-1/4
1-5/16
27MM
29MM
32MM
34MM
66.2
91.3
98.8
102.5
41432
41432T 1-1/4-7
1-3/8
36MM 1-3/4 1-1/8 2-1/2 2-1/2 208.5
1/4
5/8
7/32 11/16
9/32 7/8
9/32
7/32
7/8
3/4
1-1/4
1-1/2
1-5/8
1-3/4
1-5/8
1-1/8 11/16 1-5/8
1-1/2 3/4 1-3/4
1-1/4 7/8
2
1-1/4 15/16
2
7/8
7/8
2
2
2
2
Wt.
(lbs/
100 pcs)
Continued on page 21
20
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
T-Slot Nuts (continued)
NEW Inch Sizes
Part
No.
Tapped
*English **Metric
Through Thread Table Slot
Table
Part No.
A
B
Slot
C
D
E
F
Wt.
41470
41470T 1/4-20
3/8
10MM
3/8
1/4
5/8
41471
41471T 5/16-18
7/16
12MM
1/2 7/32
3/4
41472
41473
41474
41476
41478
41472T
41473T
41474T
41476T
41478T
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
7/16
1/2 9/16
5/8
5/8
12MM
13MM
15MM
16MM
16MM
1/2 1/2 5/8
5/8
7/8
41475
41477
41479
41480
41475T
41477T
41479T
41480T
1/2-13
1/2-13
1/2-13
1/2-13
9/16
5/8
5/8
11/16
15MM
16MM
16MM
18MM
5/8 11/32 7/8
1 5/8 3/8
1
1 7/8 7/16 1-3/16 1-3/16
3/4 13/32 1-1/8 1-1/8 41481
41482
41483
41481T 5/8-11
41482T 5/8-11
41483T 5/8-11
11/16
3/4
13/16
18MM
20MM
21MM
3/4 13/32 1-1/8 1-1/8 3/4 1/2 1-1/4 1-1/8 1 9/16 1-3/8 1-1/2 41484
41486
41485
41487
41484T
41486T
41485T
41487T
3/4-10
3/4-10
3/4-10
3/4-10
13/16
13/16
7/8
1
21MM
1
21MM
1
23MM
1
26MM 1-1/4
41488
41490
41489
41488T
41490T
41489T
7/8-9
7/8-9
7/8-9
1
1-1/16
1-1/8
26MM 1-1/2 3/4
27MM 1-1/2 3/4
29MM 1-1/2 3/4
1-3/4 1-1/2 1-3/4 1-1/2 1-3/4 1-1/2 41491
41491T
1-8
1-1/8 29MM 1-1/2 3/4
1-3/4 1-3/4
(lbs/
100 pcs)
7/8 1 7/32 3/4
1 9/32 7/8
1 11/32 7/8
1 3/8
1
1 7/16 1-3/16 1-3/16
9/16
17/32
5/8
3/4
1-3/8
1-1/4
1-1/2
1-1/2
1-1/2 1-1/2 1-1/2 1-1/2 Metric
Part
No.
Tapped
Through Thread
Part No.
A
61401
61402
61401T
61402T
M6 x 1.0
M6 x 1.0
8MM
10MM
5/16
7/16
10
11
6
6
14
16
19
22
3
5
61403
61404
61405
61403T M8 x 1.25
10MM
7/16
11
6
16
22
5
61404T M10 x 1.5
61405T M10 x 1.5
12MM
14MM
1/2
9/16
13
16
7
9
19
22
22
29
6
12
61406
61407
61408
61406T M12 x 1.75 14MM
61407T M12 x 1.75 16MM
61408T M12 x 1.75 17MM
9/16
5/8
11/16
16
16
19
9
9
11
22
25
29
29
29
32
12
14
21
61409
61410
61409T M16 x 2.0
61410T M16 x 2.0
18MM
20MM
3/4
13/16
19
25
11
14
29
32
32
38
19
36
61411
61412
61413
61411T M20 x 2.5
22MM
7/8
25
14
35
38
36
61412T M24 x 3.0
61413T M24 x 3.0
27MM
33MM
1-1/16
1-5/16
29
32
18
24
41
51
51
51
69
106
Stainless Steel T-Nuts
•300 Stainless Steel
•The last thread is incomplete
to prevent the stud from
turning through the bottom
of the nut.
* T-Nuts are undersized to fit
machine table slot.
**Metric *English
Table Table Slot
Slot
B
C
D
E
F
Wt.
(lbs/
100pcs)
*English
Part
Thread Table Slot
No.
A
B
C
D
E
F
47401
47403
47404
47405
47409
47410
47412
47415
47416
1/4-20
5/16-18
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/16
3/8
7/16
1/2
9/16
5/8
11/16
11/16
3/4
1/4
3/8
3/8
1/2
1/2
5/8
3/4
3/4
3/4
3/16
1/4
13/64
9/32
11/32
11/32
7/16
7/16
15/32
1/2
5/8
5/8
7/8
7/8
1
1
1
1-1/4
Weight
(lbs/100pcs)
9/16
7/8
7/8
7/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
3
6
6.5
9
12
15
22
20
23
21
TOOLING COMPONENTS
Quarter Turn T-Slot Nuts
•Sintered Metal
•The last thread is incomplete to prevent the stud
from turning through the bottom of the nut
•Special sizes quoted upon request
Insert 1/4
Turn T-Nut
Twist 1/4
Turn T-Nut
Quarter Turn T-Nut Application
Flange Nuts
•Black oxide finish, case hardened
•12L14 Material
•Available in Coarse or Fine Threads
•Standard package quantity:
41601- 41607: 25 pcs.
41701- 41707: 25 pcs.
•Many sizes conform to TCMAI standards
•Special sizes quoted upon request
•Metric: Dimension in millimeters
English
Part
Thread Table Slot
No.
A
B
Metric
Table
Slot
C
D
E
F
41450
41451
41452
41453
41454
41455
41456
41457
12MM
12MM
15MM
16MM
18MM
20MM
18MM
26MM
3/8-16
3/8-16
1/2-13
1/2-13
5/8-11
5/8-11
1/2-13
3/4-10
7/16
1/2
9/16
5/8
11/16
3/4
11/16
1
1/2
1/2
5/8
5/8
3/4
3/4
3/4
1
0.208
0.271
0.333
0.333
0.427
0.458
0.427
0.615
0.438
0.500
0.563
0.625
0.688
0.75
0.688
1
Weight
(lbs/100pcs)
0.75
1
0.94
1.25
1.38
1.50
1.3
1.75
2.7
4.6
5.3
8.9
11.9
15.7
14.2
33.6
* Quarter Turn T-Slot Nuts are undersized to fit machine table slot
UNC Flange Nuts
Part
No.
Thread
A
B
C
D
E
41601
41602
41603
41604
41605
41606
41607
41608
41609
41611
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/4 -7
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-3/4
2
2-1/2
5/16
3/8
1/2
9/16
11/16
13/16
1
1-1/8
1-1/4
1-1/4
Weight
(lbs/100pcs)
3/32
1/2
1/8
9/16
1/8 11/16
5/32
3/4
3/16
7/8
3/16 1-1/16
1/4 1-1/4
1/4 1-7/16
1/4 1-5/8
1/4 1-13/16
3
4
5
7
11
18
31
42
59
66
UNF Flange Nuts
Part
No.
Thread
A
B
C
D
E
41701
41702
41703
41704
41705
41706
41707
41708
41709
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
7/8-14
1-14
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-3/4
2
5/16
3/8
1/2
9/16
11/16
13/16
1
1-1/8
1-1/4
Weight
(lbs/100pcs)
3/32
1/2
1/8
9/16
1/8 11/16
5/32
3/4
3/16
7/8
3/16 1-1/16
1/4 1-1/4
1/4 1-7/16
1/4 1-5/8
3
4
5
7
11
18
31
42
59
Metric
Part
No.
61601
61602
61603
61604
61605
61606
61607
22
Thread
A
B
C
D
E
M6 x 1.0
M8 x 1.25
M10 x 1.5
M12 x 1.75
M16 x 2.0
M20 x 2.5
M24 x 3.0
16
19
22
27
33
40
49
8
10
13
17
21
25
32
2
2.5
3
4
5
6
7
10
13
17
19
24
30
36
Weight
(lbs/100pcs)
1.8
2.4
3.5
9.5
16.5
29
51
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Stainless Steel Flange Nuts
•303 Stainless Steel
•Special sizes quoted upon request
Can be used with:
•Driver Studs, page 8
•T-Bolts, pages 16
•Latch Bolts, page 18
Part
No.
Thread
A
B
C
D
E
47601
47602
47603
47604
47605
47606
47607
47608
47609
47611
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/4 -7
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-3/4
2
2-1/2
5/16
3/8
1/2
9/16
11/16
13/16
1
1-1/8
1-1/4
1-1/4
Weight
4
5
6
8
12
19
32
43
60
67
(lbs/100pcs)
3/32
1/2
1/8
9/16
1/8 11/16
5/32
3/4
3/16
7/8
3/16 1-1/16
1/4 1-1/4
1/4 1-7/16
1/4 1-5/8
1/4 1-13/16
Swivel Flange Nuts
•Black oxide finish, case hardened
•12L14 Material
•Head rotates but washer remains stationary upon
contact and holds rigidly without marring the workpiece
Can be used with:
•Driver Studs, pages 8-12
•T-Slot Bolts, pages 13-15
•T-Bolts, pages 16-17
Part
No.
Thread
A
B
C
D
E
42001
42002
42003
42004
42005
42006
42007
42008
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
5/8
3/4
7/8
1-1/8
1-3/8
1-5/8
1-3/4
2
3/8
7/16
17/32
23/32
29/32
1-1/64
1-1/8
1-15/64
Weight
(lbs/100pcs)
1/8
1/2
9/64 9/16
5/32 11/16
7/32 7/8
1/4 1-1/16
9/32 1-1/4
7/16 1-7/16
15/32 1-5/8
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
2
3
4
11
18
28
41
57
23
TOOLING COMPONENTS
Spherical Flange Nuts
Stainless Steel
Steel
•Nut: 303 Stainless Steel
•Equalizes thread loads when
used with Spherical Washers
Part
No.
Thread
A
B
C
D
E
F
41821
41822
41823
41824
41825
41826
1/4-20 5/8
5/16
5/16-18 3/4
3/8
3/8-16 7/8
1/2
1/2-13 1-1/8 11/16
5/8-11 1-3/8 13/16
3/4-10 1-5/8
1
3/32
3/32
1/8
5/32
3/16
1/4
1/2
9/16
11/16
7/8
1-1/16
1-1/4
3/4
1
1-1/4
1-1/2
1-3/4
2-1/4
Weight
(lbs/100pcs)
2
4
6
8
13
20
For spherical washers,
see pgs. 28-29
Spherical Flange Nut Assemblies
•Assemblies consist of Flange Nuts
(Part Nos. 41801-41811) and
Spherical Washers (Part Nos. 42741-42750)
For material information, see
individual components
Stainless Steel Spherical
Flange Nut Assemblies
•Assemblies consist of 1 Stainless Steel Flange
Nut (Part Nos. 41821-41826) and 1 Female
Spherical Washer (Part Nos. 47741-47745)
For material information, see
individual components
24
•Black Oxide Finish and
Case Hardened
•12L14 Material
•Many sizes conform to
TCMAI standards
•When used with
Spherical Washers
Flange Nuts will
equalize thread loads
•Standard package
quantity:
41801- 41807: 25 pcs.
Part
No.
Thread
A
B
C
D
E
F
41801
41802
41803
41804
41805
41806
41807
41808
41809
41811
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/4-7
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-3/4
2
2-1/2
5/16
3/8
1/2
9/16
11/16
13/16
1
1-1/8
1-1/4
1-1/4
3/32 1/2
1/8 9/16
1/8 11/16
5/32 3/4
3/16 7/8
3/16 1-1/16
1/4 1-1/4
1/4 1-7/16
1/4 1-5/8
1/4 1-13/16
Weight
(lbs/100pcs)
3/4
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
2-1/4
2-1/2
2-3/4
3
2
4
6
8
13
20
34
45
65
76
(lbs/100pcs)
Part
No.
Thread
Size
Total Degree
of Rotation
41901
41902
41903
41904
41905
41906
41907
41908
41909
41911
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/4-7
5
5
3
4
2
2
2
3
3
3
Part
No.
Thread
Size
Total Degree
of Rotation
41921
41922
41923
41924
41925
41926
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
5
5
3
2
2
2
Weight
3
6
8
11
16
25
43
56 77
104
Weight
(lbs/100pcs)
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
3
6
8
11
16
25
TOOLING COMPONENTS
Coupling (Extension) Nuts
Heavy Hex Nuts
•Low Carbon Steel Material
•Black oxide finish, case hardened
•Coupling Nuts can be used to join two or more
studs for a desired length.
•Many sizes conform to TCMAI standards
•Standard package quantity: 41501-41507: 25 pcs.
•Black Oxide Finish
•High Grade Alloy Steel
•Will outlast ordinary Hex Nuts when
used in repetitive operations
•Standard package quantity: 25 pcs.
Part
No.
Thread
A
B
C
(lbs/100pcs)
41501
41502
41503
41504
41505
41506
41507
41508
41509
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1/2
9/16
11/16
3/4
7/8
1-1/16
1-1/4
1-7/16
1-5/8
5/8
7/8
1
1-1/4
1-1/4
1-5/8
1-7/8
2-1/4
2-1/2
4
7
9
13
18
34
50
88
106
Metric
Part
No.
61501
61502
61503
61504
61505
61506
61507
Weight
Part
No.
Thread
A
B
C
(lbs/100pcs)
Weight
42101
42102
42103
42104
42105
42106
42107
42108
42109
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1/2
9/16
11/16
3/4
7/8
1-1/16
1-1/4
1-7/16
1-5/8
15/64
19/64
23/64
27/64
31/64
39/64
47/64
55/64
63/64
1
2
4
5
6
11
19
26
40
Heavy Hex Jam Nuts
•Black oxide finish, case hardened
•High Grade Alloy Steel
•Will outlast ordinary Hex Jam Nuts
when used in repetitive operations
•Standard package quantity: 25 pcs.
Dimensions in millimeters
Thread
A
B
C
(lbs/100pcs)
Weight
M6 x 1.00
M8 x 1.25
M10 x 1.5
M12 x 1.75
M16 x 2.0
M20 x 2.5
M24 x 3.0
13
14
16
22
27
32
38
16
19
24
32
40
51
64
3
4.6
9
18
30
52
94
Part
No.
Thread
A
B
C
(lbs/100pcs)
Weight
42201
42202
42203
42204
42205
42206
42207
42208
42209
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1/2
9/16
11/16
3/4
7/8
1-1/16
1-1/4
1-7/16
1-5/8
11/64
13/64
15/64
17/64
19/64
23/64
27/64
31/64
35/64
1
1
2
3
3
7
11
16
20
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
25
TOOLING COMPONENTS
Swing “C” Washers
•Black Oxide Finish
•Case Hardened
•1144 Material
•Shoulder screw furnished with each washer
•Shoulder diameter of the screw allows
pivotal motion
Part
No.
A
B
C
D
E
F
42850
42851
42852
42853
13/32
17/32
21/32
25/32
1
1/4
1-1/4 5/16
1-1/2 3/8
1-3/4 1/2
3/4
1
1-1/8
1-1/4
3/8
1/2
9/16
5/8
3/8
3/8
1/2
1/2
Shoulder
Screw
Size
(lbs/100pcs)
5/16-18
5/16-18
3/8-16
3/8-16
15
33
49
74
Weight
Hardened Flat Washers
•Black Oxide Finish and Case
Hardened (steel washers only)
•Material: C1010 Steel or
303 Stainless Steel
•Many sizes conform to
TCMAI standards
•Large quantities quoted
upon request
English
Steel
Part
No.
Metric
Part
No.
Stud
Size
A
B
C
63601
63602
63603
63605
63606
63608
63609
M6
M8
M10
M12
M16
M20
M24
7
9
11
13
17
22
26
16
19
22
29
35
44
51
3
3
3
3
3
5
4
Weight
(lbs/100pcs)
1
2
3
3
4
8
12
42600
42601
42602
42603
42604
42605
42606
42607
42608
42609
42610
42611
42612
42613
42614
Stainless
Steel
Stud
Part No.
Size
A
B
C
42660
42661
42662
42663
42664
42665
42666
42667
42668
42669
42670
42671
42672
42673
42674
#10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
#4
#6
#8
13/64
9/32
11/32
13/32
15/32
17/32
21/32
25/32
29/32
1-1/32
1-5/32
1-9/32
1/8
5/32
3/16
1/2
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-3/4
2
2-1/4
2-1/2
5/16
3/8
7/16
Weight
(lbs/100pcs)
3/32
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
3/16
7/32
9/32
5/64
5/64
5/64
0.5
1
2
2
3
3
4
8
8
12
19
28
0.5
0.5
0.5
Heavy Duty Hardened Flat Washers
•Black Oxide Finish
•Case Hardened
•C1010 Material
•Large quantities quoted upon request
Metric
26
Part
No.
Stud
Size
A
B
C
63619
63620
63621
63623
63624
63626
63627
M6
M8
M10
M12
M16
M20
M24
7
9
11
13
17
22
26
16
19
22
29
35
44
51
5
5
5
5
5
6
7
Weight
(lbs/100pcs)
2
2
3
4
6
12
18
English
Part
No.
Stud
Size
A
B
C
42619
42620
42621
42622
42623
42624
42625
42626
42627
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
9/32
11/32
13/32
15/32
17/32
21/32
25/32
29/32
1-1/32
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-3/4
2
Weight
(lbs/100pcs)
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
9/32
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
2
2
3
4
4
6
11
11
18
TOOLING COMPONENTS
Heavy Duty Hardened
Flat Washer Assortment
Part No. 42697
Hardened Flat
Washer Assortment
Part No. 42699
•Heavy Duty Flat Washer
Assortment Contains:
42621: 10 pcs.
42623: 10 pcs.
42624: 10 pcs.
42625: 10 pcs.
1 Holder
4 Holder Pins
•For material information,
see individual components.
•Flat Washer Assortment
Contains:
42601: 50 pcs.
42603: 50 pcs.
42605: 25 pcs.
42606: 25 pcs.
42607: 12 pcs.
42609: 12 pcs.
1 Holder
8 Holder Pins
•For material information,
see individual components.
Metric Heavy
Duty Hardened Flat
Washer Assortment
Part No. 63697
Metric Hardened Flat Washer
Assortment
Part No. 63699
•Metric Heavy Duty Flat Washer
Assortment Contains:
63621: 10 pcs.
63623: 10 pcs.
63624: 10 pcs.
63626: 10 pcs.
1 Holder
4 Holder Pins
•For material information,
see individual components.
•Metric Flat Washer
Assortment Contains:
63601: 50 pcs.
63602: 50 pcs.
63605: 25 pcs.
63606: 25 pcs.
63608: 12 pcs.
63609: 12 pcs.
1 Holder
8 Holder Pins
•For material information,
see individual components.
“C” Washers
Part
No.
•Black Oxide Finish
•Case Hardened
•1018 Material: 42801, 08, 09
•12L14 Material: 42802, 06, 07, 13, 14, 17, 20
•Many sizes conform to TCMAI standards
42801
42802
42806
42807
42808
42809
42813
42814
42817
42820
Stud
Size
A
B
C
3/16-1/4
3/16-1/4
5/16
5/16-3/8
5/16-3/8
5/16-3/8
7/16-1/2
7/16-1/2
5/8
3/4
9/32
9/32
11/32
13/32
13/32
13/32
17/32
17/32
21/32
25/32
3/4
1
1-1/4
1-1/4
1-1/2
1-3/4
1-7/8
2-1/4
2-1/8
2-1/2
Weight
(lbs/100pcs)
1/4
1/4
5/16
3/8
3/8
3/8
3/8
3/8
3/8
7/16
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
2
5
10
10
15
20
24
35
29
44
27
TOOLING COMPONENTS
Spherical Washers – Steel
•Black Oxide Finish
•Case Hardened
•Material: 12L14 steel
•Tops and bottoms also sold separately
•Reduces stress on threads
•Bottom Washer can be used with Spherical Flange Nuts
•Compensates for slight misalignment between the
workpiece and strap clamp
•Many sizes conform to TCMAI standards
•Special sizes quoted upon request
Assemblies
Steel
Part
No.
Male
Female
Part No. Part No.
Stud
Ref.
A
B
Size
C
42701
42702
42703
42704
42705
42706
42707
42708
42709
42710
42721
42722
42723
42724
42725
42726
42727
42728
42729
42730
42741
42742
42743
42744
42745
42746
42747
42748
42749
42750
3/16 and 1/4
5/16 and 3/8
7/16 and 1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
3/16
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
Total
Degree of
Rotation
(lbs/100pcs)
8 and 5
5 and 3
4 and 2
2
3
3
3
3
3
3
1
4
8
10
17
18
34
38
50
80
Weight
Male (Top) Spherical Washers
Steel
Part
Stud
No.
Size
A
B
+.000
-.005 Rad.
C
R
42721
42722
42723
42724
42725
42726
42727
42728
42729
42730
.120
.130
.188
.188
.219
.240
.330
.281
.312
.350
3/16 and 1/4
5/16 and 3/8
7/16 and 1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
9/32
13/32
17/32
21/32
25/32
15/16
1-1/16
1-3/16
1-5/16
1-9/16
5/8
7/8
1-1/8
1-3/8
1-5/8
1-3/4
2
2-1/4
2-1/2
2-7/8
3/4
1-1/4
1-1/2
1-3/4
2-1/4
2-1/2
2-3/4
3
3
3
Total
Weight
(lbs/100pcs)
1
1
3
4
7
9
17
16
22
28
Female (Bottom) Spherical Washers
28
Steel
Part
Stud
No.
Size
A
B
+.000
-.005 Rad.
C
R
42741
42742
42743
42744
42745
42746
42747
42748
42749
42750
.120
.156
.188
.219
.265
.240
.290
.350
.375
.390
3/16 and 1/4
5/16 and 3/8
7/16 and 1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
5/16
7/16
9/16
11/16
13/16
1
1-1/8
1-1/4
1-3/8
1-5/8
5/8
7/8
1-1/8
1-3/8
1-5/8
1-3/4
2
2-1/4
2-1/2
2-7/8
3/4
1-1/4
1-1/2
1-3/4
2-1/4
2-1/2
2-3/4
3
3
3
Total
Weight
(lbs/100pcs)
1
2
3
5
10
9
14
22
28
35
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Spherical Washers – Stainless Steel
•Material: 303 stainless steel
•Tops and bottoms also sold separately
•Reduces stress on threads
•Bottom Washer can be used with Spherical Flange Nuts
•Compensates for slight misalignment between the
workpiece and strap clamp
•Many sizes conform to TCMAI standards
•Special sizes quoted upon request
Assemblies
tainless Male
S
Female
Steel Part No. Part No.
Stud
Ref.
Part No.
A
B
Size
C
47701
47702
47703
47704
47705
47721
47722
47723
47724
47725
47741
47742
47743
47744
47745
1/4
3/8
1/2
5/8
3/4
3/16
1/4
5/16
5/16
3/8
Total
Degree of
Rotation
(lbs/100pcs)
8
5
2
2
3
1
4
8
10
17
Weight
Male (Top) Spherical Washers
Stainless
Steel
Stud
Part No.
Size
A
B
+.000
-.005
Rad.
C
R
47721
47722
47723
47724
47725
1/8
11/64
13/64
13/64
1/4
1/4
3/8
/2
5/8
3/4
9/32
13/32
17/32
21/32
25/32
5/8
7/8
1-1/8
1-3/8
1-5/8
3/4
1-1/4
1-1/2
1-3/4
2-1/4
Total
Weight
(lbs/100pcs)
1
1
3
4
7
Female (Bottom) Spherical Washers
tainless
S
Steel
Stud
Part No.
Size
A
B
+.000
-.005
Rad.
C
R
47741
47742
47743
47744
47745
1/8
11/64
7/32
7/32
1/4
1/4
3/8
1/2
5/8
3/4
9/32
13/32
17/32
21/32
25/32
5/8
7/8
1-1/8
1-3/8
1-5/8
3/4
1-1/4
1-1/2
1-3/4
2-1/4
Total
Weight
(lbs/100pcs)
1
2
3
5
10
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
29
TOOLING COMPONENTS
Nuzzler® Edge Clamps: Standard Grip
• Clamp Material: 1018 Steel
• Black Oxide Finish
• Features a double action,
adjustable nose which ex erts clamping pressures
both downward and inward
through a 45 degree angle.
• Noses have serrations for
better gripping of non finished or semi-finished Part
workpieces
No.
A
• Tapered slots prevent clamp
33818
1-7/8
from sliding off the work-
33820
2-3/8
33822
2-7/8
piece during tightening
33802 2-5/16
33891
2-3/4
• Length “A” is calculated
33806 3-5/16
with nose raised 1/8”
33711 3-5/16
33824
3-7/8
• Clamp Washer is included
33715
3-7/8
with each Edge Clamp
33804
4-1/8
33893 4-11/16
• Standard Grip includes
33808 5-3/16
33713 5-3/16
removable aluminum nose 33826 5-5/16
cap, which prevents damage
33717 5-5/16
33810 5-13/16
to your workpiece
33813
33828
7-1/8
7-1/4
Nose
Style
B
C
D
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
5/8
5/8
3/4
3/4
7/8
7/8
1-1/4
1-1/4
7/8
Bolt
Size
E
F
G
1/4
5/16
3/4
5/16
1-1/4 5/16
3/8
3/8
11/16
3/8
3/4
1/2
5/8
5/8
1-1/4
1/2
1-1/4
5/8
2
3/8
2-3/16 3/8
2-1/2
1/2
2-1/2
5/8
2
1/2
2
5/8
2-1/4
1/2
3-5/16 1/2
3
1/2
13/32
5/16
5/16
7/16
1/2
11/16
11/16
1/2
1/2
11/16
15/16
5/8
5/8
7/8
7/8
1-1/16
1-3/16
1-3/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
5/8
5/8
3/4
3/4
7/8
7/8
3/4
3/4
7/8
Wrench
Wt.
Size (lbs/100pcs)
5/32
5/32
5/32
3/16
3/16
1/4
1/4
1/4
1/4
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
30
35
40
43
49
88
88
112
112
73
76
123
123
155
155
216
255
205
Nuzzler® Edge Clamps: Low Grip
• Clamp Material: 1018 Steel
• Black Oxide Finish
• Features a double action,
adjustable nose which ex erts clamping pressures
both downward and inward
through a 45 degree angle.
• Noses have serrations for
Part
better gripping of non No.
A
finished or semi-finished 33817
1-7/8
33819
2-3/8
workpieces
33821
2-7/8
• Tapered slots prevent clamp
33801 2-5/16
33890
2-3/4
from sliding off the work-
33805 3-5/16
piece during tightening
33710 3-5/16
33823
3-7/8
• Length “A” is calculated
33714
3-7/8
33803
4-1/8
with nose raised 1/8”
33892 4-11/16
• Low Profile Nose provides a
33807 5-3/16
33712 5-3/16
greater machining clearance
33829
5-1/4
33825 5-5/16
• Clamp Washer is included
33716 5-5/16
with each Edge Clamp
33809 5-13/16
33812
33827
30
7-1/8
7-1/4
Nose
Style
B
C
D
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/4
1-1/4
1-1/2
1-1/2
2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
5/8
5/8
3/4
3/4
1-1/4
7/8
7/8
1-1/4
1-1/4
7/8
1/4
3/4
1-1/4
3/8
11/16
3/4
5/8
1-1/4
1-1/4
2
2-3/16
2-1/2
2-1/2
1-3/8
2
2
2-1/4
3-5/16
3
Bolt
Size
E
F
G
5/16
5/16
5/16
3/8
3/8
1/2
5/8
1/2
5/8
3/8
3/8
1/2
5/8
3/4
1/2
5/8
1/2
1/2
1/2
13/32
5/16
5/16
7/16
1/2
11/16
11/16
1/2
1/2
11/16
15/16
5/8
5/8
27/32
7/8
7/8
1-1/16
1-3/16
1-3/8
1/8
1/8
1/8
1/4
1/4
3/8
3/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/4
1/4
3/8
3/8
1/4
Wrench
Wt.
Size (lbs/100pcs)
5/32
5/32
5/32
3/16
3/16
1/4
1/4
1/4
1/4
3/16
3/16
1/4
1/4
5/16
1/4
1/4
1/4
1/4
1/4
25
29
35
38
44
81
81
100
100
63
73
117
117
235
141
141
207
252
189
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Nuzzler® Edge Clamps: High Grip
• Clamp Material: 1018 Steel
• Black Oxide Finish
• Features a double action,
adjustable nose which ex erts clamping pressures
both downward and inward
through a 45 degree angle.
• Noses have serrations for
better gripping of non finished or semi-finished Part
workpieces
No.
A
• Tapered slots prevent clamp
33815
5-1/4
from sliding off the work-
33811
6-1/8
33816 6-7/16
piece during tightening
33814
7-3/8
• Length “A” is calculated with
nose raised 1/8”
• Clamp Washer is included with each Edge Clamp
Nose
Style
B
C
D
H
H
H
H
2
1-1/2
2-1/2
1-1/2
1-1/4
1-1/4
1-1/2
1-1/4
1-3/8
2-1/4
2
3-5/16 Bolt
Size
E
F
G
3/4
1/2
7/8
1/2
27/32
1-1/16
15/16
1-3/16
1-1/4
1
1-1/2
1
Wrench
Wt.
Size (lbs/100pcs)
5/16
1/4
1/2
1/4
296
240
541
286
Nuzzler® Edge Clamps: Application
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
31
TOOLING COMPONENTS
Nuzzler® Edge Clamp Kits: Small
Kit Contains:
–4 Low Grip Clamps
–4 Standard Grip Clamps
–4 T-Slot Nuts
–8 Washers
–1 T-Handle Wrench
–1 Holder
•For material information, see individual components
Part
Edge Clamps
No.
2 Each
3800
2
23801
23802
23803
23804
23805
23806
23807
23808
33817-33818
33821-33822
33817-33818
33821-33822
33817-33818
33821-33822
33801-33802
33803-33804
33801-33802
33803-33804
33801-33802
33803-33804
33805-33806
33807-33808
33805-33806
33807-33808
33805-33806
33807-33808
T-Slot Table
Socket
Nut
Slot Cap Screw Weight
No.
Size
Size
Per Kit
41403T
3/8
5/16
5
41433T 7/16
5/16
5
41434T
1/2
5/16
5
41404T 7/16
41405T 1/2
3/8
5
3/8
5
41406T 9/16
3/8
5
41409T 9/16
1/2
10
41410T
1/2
10
1/2
10
5/8
41412T 11/16
Nuzzler® Edge Clamp Kits: Large
Kit Contains:
– 6 Low Grip Clamps
– 6 T-Slot Nuts
– 6 Washers
– 1 T-Handle Wrench
– 1 Holder
•For material information, see individual components
Part
Edge Clamps
No.
2 Each
23809
3810
2
23811
23812
23813
23814
23815
23816
23817
32
33817-33819-33821 33817-33819-33821
33817-33819-33821
33801-33890-33892
33801-33890-33892
33801-33890-33892
33823-33825-33827
33823-33825-33827
33823-33825-33827
T-Slot Table
Socket
Nut
Slot Cap Screw
No.
Size
Size
41403T
41433T
41434T
41404T
41405T
41406T
41409T
41410T
41412T
3/8
7/16
1/2
7/16
1/2
9/16
9/16
5/8
11/16
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
Weight
Per Kit
10
10
10
10
10
10
11
11
11
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Nuzzler® Edge Clamp Accessories
Aluminum Nose Cap
Clamp Washers
•Prevents damage to workpiece
•For standard grip clamps only
Part
No.
Height
Width
Fits Clamp
Number
33852
5/8
1
33850
5/8
1-1/4
33851
3/4
1-1/2
33853
7/8
1-1/2
33818-33820-33822
33802-33804-33891
33893
33806-33808-33810
33813
33824-33826-33828
Weight
(lbs/100pcs)
Part
No.
A
B
C
1
1
33720
33721
33722
33723
33724
33725
.410
.530
.780
.910
.340
.660
.74
.88
1.25
1.50
.62
1.10
.125
.125
.156
.156
.125
.125
1
T-Handle Wrenches
Adjustment Screws
•Alloy Steel Material
•Black Oxide Finish
Part
No.
Wrench
Hex Size
Adj.
Screw Size 33884
5/32
5/16-18 33880
3/16
3/8-16
33881
1/4
1/2-13
33882
5/16
5/8-11
33883
1/2
7/8-9
Fits Clamp
Number
Weight
(lbs/100pcs)
33817-33818-33819
33820-33821-33822
33801-33802-33803
33804-33890-33891
33892-33893
33805-33806-33807
33808-33809-33810
33811-33812-33813
33814-33823-33824
33825-33827
33828
33815-33829
33816
7
12
20
42
145
Part
No.
Thread
Wrench
Hex Size 33865
5/16-18
5/32
33864
3/8-16
3/16
33861
1/2-13
1/4
33862
5/8-11
5/16
33863
7/8-9
1/2
Fits Clamp
Number
Weight
(lbs/100pcs)
33817-33818-33819
33820-33821-33822
33801-33802-33803
33804-33890-33891
33892-33893
33811-33814-33823
33824-33825-33826
33827-33828
33805-33806-33807
33808-33809-33810
33812-33813
33815-33829
33816
2
1
2
2
10
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
33
TOOLING COMPONENTS
Center Clamps
•Material: 1018 Steel
•Case Hardened, Black Oxide Finish
•See Clamp Rest below to place in center groove
•Finger grips on both sides
30102 2-1/2 5/8
30103
4
1-1/4
30105
5
1-1/4
30106 5-1/2 1-1/4
30107
6
1-1/4
30108 4-1/2 1-1/2
30109
5
1-1/2
3/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
1-1/4
1-3/4
2
2-1/4
1-3/8
1-5/8
Stud
Size
Wt.
E
F
G
H (lbs/100pcs)
1/4
1/2
1/2
1/2
1/2
5/8
5/8
Clamp Rest
Clamp Supports
•Material: Low Carbon Steel
•Screw Case Hardened, Black Oxide Finish.
•Many sizes conform to TCMAI standards
•Clamp Rests can be used with Center Clamps
•Includes Washer, Spring
and Shaft Collar
•Black Oxide Finish
on washer only
Part
No.
A
B
C
D
Part
No.
A
B
C
D
E
44001
44002
44003
44004
44006
44008
44009
44010
1/4-20
3/8-16
1/2-13
1/2-13
5/8-11
3/4-10
5/16-18
5/16-18
1-1/4
2-1/4
2-3/8
3-7/8
3-7/8
3-7/8
1-7/8
2-1/4
1/8
7/32
1/4
1/4
1/4
1/4
3/16
3/16
5/32
11/32
11/32
11/32
15/32
15/32
7/32
7/32
7/16
9/16
11/16
11/16
7/8
1-1/16
1/2
1/2
Wt.
(lbs/100pcs)
4
12
41
30
39
78
5
5.5
1/2
3/4
3/4
3/4
3/4
7/8
7/8
3/16
3/8
3/8
3/8
3/8
1/2
1/2
1/8
9/32
9/32
9/32
9/32
9/32
9/32
16
65
81
93
109
116
228
Part
No.
Stud
Size
Weight
50801
50802
50803
50804
50805
50806
50808
1/4
5/16
3/8
1/2
5/8
3/4
1
4
4
8
12
19
26
31
(lbs/kit)
Shaft Collars
•Material: 12L14 Steel
•Zinc Plated
•Set screw draws collar
to stud
34
Part
No.
A
B
C
50901
50902
50903
50904
50905
50906
50908
1/4
5/16
3/8
1/2
5/8
3/4
1
1/2
5/8
3/4
1
1-1/8
1-1/4
1-5/8
9/32
11/32
3/8
7/16
1/2
9/16
5/8
Set Screw Weight
Thread (lbs/100pcs)
10-32
10-32
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
1
1
2
2
6
7
3
TOOLING COMPONENTS
Plain Clamps
English
•Tapered nose allows clamping in small areas
•Case Hardened
•Black Oxide Finish
•Material: 1018 Steel
Part
No.
A
B
C
D
30401 2-1/2
1
30402
4
1
30403
6
1-1/8
30404 2-1/2 1-1/8
30405
4
1-1/4
30406
6
1-1/4
30407 2-1/2 1-1/4
30408
4
1-1/2
30409
6
1-1/2
30410
4
1-1/2
30411
6
1-1/2
30412
8
1-3/4
30413
6
2
30414
8
2
30415 10
2
1/2
5/8
3/4
1/2
3/4
7/8
5/8
3/4
7/8
3/4
1
1-1/8
1-1/4
1-3/8
1-1/2
Part
No.
A
B
C
D
30401M
30402M
30403M
30404M
30405M
30406M
30407M
30408M
30409M
30410M
30411M
30412M
30413M
30414M
30415M
64
102
152
64
102
152
64
102
152
102
152
203
152
203
254
25
25
29
29
32
32
32
38
38
38
38
45
51
51
51
13
16
19
13
16
19
16
19
22
19
25
29
32
35
38
Wt.
(lbs/100pcs)
13/16 5/16 and 3/8 27/32
1-7/16 5/16 and 3/8 1-1/32
2-3/16 5/16 and 3/8 1-5/32
11/16
1/2
29/32
1-5/16
1/2
1-5/32
2-1/16
1/2
1-9/32
9/16
5/8
31/32
1-3/16
5/8
1-9/32
1-15/16
5/8
1-13/32
1-1/16
3/4
1-11/32
1-15/16
3/4
1-15/32
2-3/16
3/4
1-29/32
1-11/16 7/8 and 1 1-27/32
1-15/16 7/8 and 1 2-1/32
2-15/16 7/8 and 1 2-1/32
Metric Dimensions in millimeters
Stud Size
E
F
21
37
56
18
33
52
14
30
49
27
49
56
43
49
75
Stud Size
E
F
M6-M8-M10
M6-M8-M10
M6-M8-M10
M12
M12
M12
M16
M16
M16
M20
M20
M20
M24
M24
M24
21
26
29
23
29
29
25
31
34
33
37
48
44
52
52
24
48
105
24
67
37
31
83
150
75
164
321
274
425
618
Wt.
(lbs/100pcs)
24
48
105
24
67
37
31
83
150
75
164
321
274
425
618
Tapped End Clamps
•Material: 1018 Steel
•Case Hardened
•Black Oxide Finish
Part
No.
A
B
C
D
30902
30903
30905
30906
30907
30908
30909
30910
30912
30913
30914
30916
30917
30918
30919
30920
30921
30922
30923
2
2-1/2
2-3/4
3-1/4
4
3
4
5
4
4-1/2
5
6
4-1/2
5
5-1/2
6
6
7
8
5/8
5/8
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1/3/4
1-3/4
1-3/4
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
1
1
1
1/2
1/2
7/16
13/16
7/8
3/4
1
1-1/2
1
1-1/2
1-1/2
1-1/2
1
1-1/2
1-1/2
1-1/2
1-3/4
2-1/4
2-1/4
Stud Size
E
F
G
1/4
1/4
5/16 5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/16
1/4-20
9/16 1/4-20
13/16 5/16-18
7/8
5/16-18
15/16 5/16-18
9/16
3/8-16
3/4
3/8-16
3/4
3/8-16
3/4
1/2-13
13/16 1/2-13
1-1/4 1/2-13
2-1/4 1/2-13
7/8
5/8-11
15/16 5/8-11
1-7/16 5/8-11
2
5/8-11
1-1/4 3/4-10
1-1/4 3/4-10
1-3/4 3/4-10
Wt.
(lbs/100pcs)
10
14
33
39
48
55
76
94
70
76
85
114
111
120
142
152
----
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
35
TOOLING COMPONENTS
Serrated End Clamps
•Material: 1018 Steel
•Case Hardened
•Black Oxide Finish
•Used when a workpiece fixture
incorporates Step Blocks into the design
•Serrated teeth match all TE-CO Step Blocks
English
Part
Stud Size
No.
A
B
C
D
E
F
30501 2-1/2
1
30502
4
1
30503
6
1-1/8
30504 2-1/2 1-1/8
30505
4
1-1/4
30506
6
1-1/4
30507 2-1/2 1-1/4
30508
4
1-1/2
30509
6
1-1/2
30510
4
1-1/2
30511
6
1-1/2
30512
8
1-3/4
30513
6
2
30514
8
2
30515 10
2
1/2
5/8
3/4
1/2
3/4
7/8
5/8
3/4
7/8
3/4
1
1-1/8
1-1/4
1-3/8
1-1/2
13/16 1/4, 5/16 or 3/8
1-7/16 1/4, 5/16 or 3/8
2-3/16 1/4, 5/16 or 3/8
11/16
1/2
1-5/16
1/2
2-1/16
1/2
9/16
5/8
1-3/16
5/8
1-15/16
5/8
1-1/16
3/4
1-15/16
3/4
2-3/16
3/4
1-11/16
7/8 or 1
1-15/16
7/8 or 1
2-15/16
7/8 or 1
Metric Dimensions in millimeters
Part
No.
A
B
C
D
30501M
30502M
30503M
30504M
30505M
30506M
30507M
30508M
30509M
30510M
30511M
30512M
30513M
30514M
30515M
64
102
152
64
102
152
64
102
152
102
152
203
152
203
254
25
25
29
29
32
32
32
38
38
38
38
45
51
51
51
13
16
19
13
16
19
16
19
22
19
25
29
32
35
38
21
37
56
18
33
52
14
30
49
27
49
56
43
49
75
27/32
1-1/32
1-5/32
29/32
1-5/32
1-9/32
31/32
1-9/32
1-13/32
1-11/32
1-15/32
1-29/32
1-27/32
2-1/32
2-1/32
Stud Size
E
F
M6-M8-M10
M6-M8-M10
M6-M8-M10
M12
M12
M12
M16
M16
M16
M20
M20
M20
M24
M24
M24
Weight
(lbs/
(100pcs)
21
26
29
23
29
29
25
31
34
33
37
48
44
52
52
23
49
106
27
72
134
33
87
160
81
170
330
275
440
601
Wt.
(lbs/100pcs)
23
49
106
27
72
134
33
87
160
81
170
330
275
440
601
Soft Clamps
•Material: Mild Steel for easy modification
•Black Oxide Finish
36
Part
No.
A
B
C
D
30701
30702
30703
30704
6
6
6
6
1-1/8
1-1/2
1-1/2
1-1/2
3/4
3/4
7/8
1
2
2
2
2
Stud Size
E
F
5/16 or 3/8 1-5/32
1/2
1-7/32
5/8
1-9/32
3/4
1-11/32
Wt.
(lbs/100pcs)
120
160
179
194
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Step Clamps
•Material: 1018 Steel
•Black Oxide Finish
•Case Hardened
Part
No.
A
B
C
D
30801
30802
30803
30804
3-1/4
3-5/8
3-3/4
4-1/4
1
1-1/8
1-1/4
1-1/2
5/8
5/8
3/4
3/4
7/8
7/8
7/8
3/4
Stud
Size Thread Weight
E
F
G
H
J
K
L (lbs./100 pcs.)
3/8
1/2 5/8
3/4
1-3/16
1-7/16
1-7/16
1-7/8
1/2
1/2
3/4
3/4
1/2
1/2
3/8
3/8
1-1/8 3/4
1-1/8 7/8
1-3/8 3/4
1-3/8 13/16
3/8-16
3/8-16
3/8-16
1/2-13
50
66
84
118
Forged Plain Clamps
•Material: Forged high tensile carbon steel
•Black Oxide Finish
Part
No.
A
B
C
D
33901
33902
33903
33904
4
6
8
10
1-5/8
1-3/4
2-1/8
2-1/2
3/4
7/8
1-1/8
1-3/8
11/16
1-3/8
2
2-3/4
Stud Size
E
F
Wt.
(lbs/100pcs)
5/8 or 1/2 1-21/32
5/8 or 1/2 2-5/16
3/4
2-31/32
7/8
3-5/8
86
173
366
657
Forged Tapped Plain Clamps
•Material: Forged high tensile
carbon steel
•Black Oxide Finish
Part
No.
A
B
C
D
33911
33912
33913
33914
4
6
8
10
1-5/8
1-3/4
2-1/8
2-1/2
3/4
7/8
1-1/8
1-3/8
11/16
1-3/8
2
2-3/4
Stud Size
E
F
Tap
G
5/8 or 1/2 1-21/32 1/2-13
5/8 or 1/2 2-5/16 5/8-11
3/4
2-31/32 3/4-10
7/8
3-5/8
7/8-9
Wt.
(lbs/100pcs)
82
168
360
630
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
37
TOOLING COMPONENTS
Forged “U” Clamps
Part
No.
A
B
C
D
•Material: Forged high tensile carbon steel
•Black Oxide Finish
33920
33921
33922
33923
33924
4
6
8
10
12
1-3/4
2
2-3/8
2-3/4
3-1/4
3/4
7/8
1-1/8
1-1/4
1-3/8
2-9/16
4-5/16
6
7-11/16
9-5/16
Stud Size
E
Wt.
(lbs/100pcs)
5/8 or 1/2
5/8 or 1/2
3/4
7/8
1
86
193
400
638
798
Forged Finger-Tip Clamps
•Material: Forged high tensile carbon steel
•Black Oxide Finish
Part
No.
A
B
C
D
33930
33931
33932
4
6
8
1-5/8
1-3/4
2-1/8
3/4
7/8
1-1/8
11/16
1-1/4
1-3/4
Stud Size
E
F
5/8 or 1/2
5/8 or 1/2
3/4
1-21/32
2-3/8
3-1/8
Wt.
(lbs/100pcs)
71
151
304
Forged Gooseneck Clamps
•Material:
Forged high tensile
carbon steel
•Black Oxide Finish
Part
No.
A
B
C
D
33940
33941
33942
4
6
8
1-5/8
1-3/4
2-1/8
3/4
7/8
1-1/8
1/4
1
1-5/8
Stud Size
E
F
G
H
J
K
5/8 or 1/2
5/8 or 1/2
3/4
1-7/8
2-1/2
3-3/16
13/16 3/4 1-7/16
15/16
1
1-9/16
1-1/8 1-1/4 2-1/16
1-3/8
1-3/4
2-1/2
Wt.
(lbs/100pcs)
100
179
387
Forged Tapped Gooseneck Clamps
•Material: Forged
high tensile
carbon steel
•Black Oxide Finish
38
Part
No.
A
B
C
D
33950
33951
33952
4
6
8
1-5/8
1-3/4
2-1/8
3/4
7/8
1-1/8
Stud
Size
Tap
Weight
E
F
G
H
J
K
L (lbs./100 pcs.)
1/4 5/8 or 1/2 1-7/8 13/16 3/4 1-7/16 1-3/8 1/2-13
1
5/8 or 1/2 2-1/2 15/16 1
1-9/16 1-3/4 5/8-11
1-5/8
3/4
3-3/16 1-1/8 1-1/4 2-1/16 2-1/2 5/8-11
100
179
387
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Machinable Fixture Clamps
• Machinable steel washers provide more flexibility for holding round
or unusual shape parts.
• Parts can be held directly to the fixture plate surface or elevated
for through drilling.
• Special screw provided to hold
the washer in the proper place
during machining.
• Low Profile
• Made of mild steel for machinability
Part
No.
35320
35321
35322
35323
Max.
Holding
Clamps
Force Lbs. Per Pack
A
B
800 lbs.
2000 lbs.
4000 lbs.
6000 lbs.
4**
4**
4**
4**
C
D
1/4-20 1/8 0.40 .980
3/8-16 3/16 0.50 1.23
1/2-13 5/16 .100 1.48
5/8-11 3/8 .100 1.73
E
F
G*
.250
.350
.450
.550
.470
.710
.900
1.125
.250
.275
.300
.350
H***
.312
.406
.500
.593
* “G” is the amount of machinable stock.
** Every package includes one machining screw.
***“H” is the distance from edge of workpiece to drill & tap hole.
PitbullTM Clamps
• Extremely low bite
• Positive down force
• High resistance to rip-out
• Simple, sturdy, high quality
design and components
• Available in several sizes
and three styles
*Trademark of the Pitbull Company, Inc.
Max.
Part
Clamp Screw Holding Torque
No.
Description
Width Size Force Lbs. (in./lbs.)
35200 Tool Steel, Knife Edge .375
4-40
650 lbs.
16
35201 Tool Steel, Blunt Edge .375
4-40
650 lbs.
16
35202 Brass, Blunt Edge
.375
4-40
200 lbs.
5
35203 Tool Steel, Knife Edge .500
8-32
1500 lbs.
50
35204 Tool Steel, Blunt Edge .500
8-32
1500 lbs.
50
35205 Brass, Blunt Edge
.500
8-32
400 lbs.
25
35206 Tool Steel, Knife Edge .750 1/4-20 3600 lbs.
200
35207 Tool Steel, Blunt Edge .750 1/4-20 3600 lbs.
200
35208 Brass, Blunt Edge
.750 1/4-20 950 lbs.
50
35209 Tool Steel, Knife Edge 1.00 3/8-16 6000 lbs.
360
35210 Tool Steel, Blunt Edge 1.00 3/8-16 6000 lbs.
360
35211 Tool Steel, Knife Edge 1.50 1/2-13 12000 lbs. 1300
35212 Tool Steel, Blunt Edge 1.50 1/2-13 12000 lbs. 1300
*D: Clamp height
Total
Throw
.0075
.0075
.0075
.016
.016
.016
.024
.024
.024
.050
.050
.075
.075
Clamps
Per Pkg. A*
B
8
8
8
8
8
8
6
6
6
4
4
2
2
.150
.150
.150
.200
.200
.200
.300
.300
.300
.400
.400
.600
.600
.140
.140
.140
.187
.187
.187
.280
.280
.280
.450
.450
.640
.640
C
.375
.375
.375
.500
.500
.500
.750
.750
.750
1.00
1.00
1.50
1.50
D
E
.075 .260
.075 .260
.075 .220
.100 .390
.100 .390
.100 .340
.150 .570
.150 .570
.150 .440
.250 .710
.250 .710
.375 1.200
.375 1.200
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
39
TOOLING COMPONENTS
Fixture Clamps
Steel Stainless
Part Steel
Screw Thread Hex
Hex
No. Part No. Size Length Size
Height
35300
-
#8-32
3/8
5/16
.110
35301
-
#10-32
3/8
1/2
.160
35302
-
1/4-20
1/2
5/8
.190
35303
-
5/16-24
1/2
13/16
.190
35304
-
5/16-18
1/2
13/16
.190
35305
-
3/8-16
3/4
13/16
.250
35306
-
1/2-13
1
1
.375
35307
5/8-11 1 1/4 1 3/16
.500
-
35308 1/4-20
1/2
5/8
.190
-
35309 5/8-18
1/2
13/16
.190
Drill &
Tap Dist.* Max. Holding
Force Lbs.
.150
.250
.308
.400
.400
.400
.500
.590
.308
.400
205 lbs.
350 lbs.
800 lbs.
750 lbs.
750 lbs.
2000 lbs.
4000 lbs.
6000 lbs.
800 lbs.
750 lbs.
Total Clamps Throw Per Pkg.
.030
.040
.040
.040
.040
.050
.100
.100
.040
.040
10
10
10
12
12
10
8
4
4
4
•Hardened steel socket cap screw with an offset head and
a hexagonal washer
•Low profile makes computer
programming easier
•Small size allows more parts
per load
•Simple design keeps cost low
*NOTE: Distance from edge of workpiece to drill & tap hole.
Uniforce® Clamp
•A compact, economical workholding device enables you to fixture more parts on the machine table.
•This simple, efficient method of clamping workpieces will decrease your set up time, and increase
your profits and production.
Part
No.
35330
35331
35332
35333
35334
35335
35336
Thread Hex Key Max.
Holding Clamps Size
Size Spread Force Lbs. Per Pkg. A
B
C
#2-56
#4-40
#8-32
1/4-20
5/16-18
1/2-13
5/8-11
5/64
3/32
9/64
3/16
1/4
3/8
1/2
.265
.395
.540
.800
1.060
1.590
2.100
200 lbs.
310 lbs.
500 lbs.
1500 lbs.
2000 lbs.
3500 lbs.
6000 lbs.
6
6
8
6
4
2
2
.240
.360
.485
.735
.980
1.470
1.960
.27
.38
.57
.77
1.02
1.52
2.03
.320
.470
.625
.940
1.250
1.875
2.500
D
E
F
.210
.310
.410
.635
.820
1.215
1.625
.140
.185
.220
.375
.500
.750
1.00
.250
.375
.500
.750
1.00
1.50
2.00
*”F” means the distance between workpieces for clamp clearance. Drill and tap mounting hole
on the center of “F” dimension.
Knife Edge Clamps
•Bites into workpiece for secure clamping
•Follows contour of part for maximum contact
•Hardened steel
•For castings & rough cut stock
Part No.
35220
35221
35222
40
Thread
Size
3/8-16
1/2-13
5/8-11
Package Includes
(8) Cam Screws + Knife Edge W
(8) Cam Screws + Knife Edge W
(4) Cam Screws + Knife Edge W
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
TalonGripTM Vise Jaws Systems
Introducing a new and innovative product that will increase the
functionality of your standard 4 and 6 inch vises. TalonGripTM is a
simple bolt on system that will allow you to perform aggressive
machining operations while clamping on as little as .060 of an inch.
•Ideal for small lot sizes, difficult application or prototype work
when building a fixture would not be beneficial.
•Also available individually for fixturing with the Pitbull® Clamp
or soft jaw applications.
Vise Jaw Grips & Stops
Part
No.
ITEM
A
B
C
D
35420
35425
35410
35415
Recommended Qty. per
Gripping Height
pack
Extra grips .75 .500 .250 10-32
Extra grips .75 .500 .250 M5
Extra stops -
-
- 10-32
Extra stops -
-
-
M5
.060-.075
.060-.075
-
-
2
2
1
1
Fixture Grips
Part
No.
A
B
C
D
35430
35431
35432
35433
35434
35435
.75
.75
.75
.75
1.00
1.00
Steel Vise Jaw Set
Recommended Qty. per
Gripping Height pack
.750 .312 10-32
.750 .312 M5
1.000 .312 10-32
1.000 .312 M5
1.000 .500 5/16-18
1.000 .500 M8
.06-.120
.06-.120
.06-.120
.06-.120
.060-.220
.060-.220
NEW
Part
No.
Vise
A
B
C
D
2
2
2
2
1
1
35400
35401
35402
4”
4”/6”
6”
4.0
6.0
8.0
1.49
1.74
1.74
E
1.0
2.5
.688
1.0 2.5/3.88. 688/.94
1.0 3.88
.94
Set includes 4 TalonGrips, 1 stop with M5 screws
VersaGripTM Vise Jaws Systems
Allows you the versatility of clamping standard vise work as well as providing a solution for difficult applications that would normally require
fixturing or machining soft-jaws. By simply replacing your current
jaws with the VersaGrip system you can securely hold odd shaped parts
while machining at speeds and feeds never thought possible.
•Can accommodate a wide range of part sizes as well as
holding multiple parts in a single cycle
•Hardened (52-54 RC) VersaGrip has penetrating teeth
designed to bite into your workpiece preventing lateral
and horizontal movement
•Will hold flame cuts parts, castings, even parts with a
negative draft
Steel Vise Jaw Set
VersaGrip
Part
No.
A
B
C
35455
.750 .375 M5
Recommended Qty. per
Gripping Height pack
.060-.140
2
Part
No.
Vise
A
B
C
D
35450
35451
4”/6” 6.00 1.88
6” 8.00 1.88
1.0
1.0
E
2.5/3.88 .688/.94
3.88
.94
Set includes 4 VersaGrips
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
41
TOOLING COMPONENTS
ID ExpansionTM Clamp
•Low profile
•Ideal for secondary
operations on lathe parts
•Easily machined to size
on lathe or mill
•Excellent for palletized
setups
•Allows more parts per
workcube or fixture plate
•Clamp body made of mild
steel for machinability
•Tighten with hex key or
hydraulic pull cylinders
PATENT PENDING
Part Model
+.000
No.
No.
A
B
C
D
E -.002
F
G* H**
I
J
35260
#0
.86
.63
.59
.23
1.170
.49
.28
6-32 on .825 BHC
8-32 .30
35261
#1
.98
.75
.59
.23
1.240
.56
.48
6-32 on .910 BHC
1/4-20 .50
35262
#2
.98
.75
.59
.23
1.476
.79
.53 6-32 on 1.140 BHC 5/16-18 .56
35263
#3
1.13
.88
.69
.25
1.968 1.06 .71 8-32 on 1.550 BHC
3/8-16 .71
35264
#4
1.25
1.0
.81
.25
2.205 1.39 .90 8-32 on 1.790 BHC
1/2-13 .71
35265
#5
1.56 1.25 1.06 .31
2.736 1.65 1.15 10-32 on 2.200 BHC 5/8-11 .79
35266
#6
1.56 1.25 1.06 .31
2.972 2.03 1.15 10-32 on 2.515 BHC 5/8-11 .79
35267
#7
1.79 1.48 1.27 .31
4.232 3.06 1.15 1/4-20 on 3.646 BHC 5/8-11 .79
35268 #00
.42
.30
.24
.12
.787
.29
.16
2-56 on .540 BHC
2-56 .16
35269
#8
1.79 1.48 1.27 .31
5.232 4.06 1.15 1/4-20 on 4.648 BHC 5/8-11 .79
*”G”: Minimum diameter the “F” dimension can be machined or turned down to
**H: 3 mounting screws included
Machinable Uniforce Clamps
•Hold round and unusual shaped parts with ease
•Compact method allows more parts per load at a lower price than vise soft jaw
•Available with extra material on the clamping jaws so it can be machined to conform
to the shape of your
Part
workpiece
No. Description Model A* B
C
D
E F** G H***
I
•Specially designed steel
35350 1 Clamp Assembly w/Locking Plate
500 1.125 .50 .62 .420 .25 .18 .400 2-56
8-32
wedge spreads the
35351 1 Clamp Assembly, No Locking Plate 500 1.125 .50 .62 .420 .25 .18 .400 2-56
8-32
35352 1 Clamp Assembly w/Locking Plate
750 1.50 .75 .94 .632 .37 .26 .625 6-32 1/4-20
clamping force uni35353 1 Clamp Assembly, No Locking Plate 750 1.50 .75 .94 .632 .37 .26 .625 6-32 1/4-20
formly on both sides
35354 1 Clamp Assembly w/Locking Plate 1000 2.00 1.0 1.25 .820 .50 .39 .812 6-32 5/16-18
of the 7075-T6
35355 1 Clamp Assembly, No Locking Plate 1000 2.00 1.0 1.25 .820 .50 .39 .812 6-32 5/16-18
35356 1 Clamp Assembly w/Locking Plate 1500 3.00 1.5 1.87 1.215 .75 .62 1.20 10-32 1/2-13
aluminum channel
35357 1 Clamp Assembly, No Locking Plate 1500 3.00 1.5 1.87 1.215 .75 .62 1.20 10-32 1/2-13
35358 1 Clamp Assembly w/Locking Plate 2000 4.00 2.0 2.5 1.625 1.0 .80 1.625 1/4-20 5/8-11
•Unique locking plate
35359 1 Clamp Assembly, No Locking Plate 2000 4.00 2.0 2.5 1.625 1.0 .80 1.625 1/4-20 5/8-11
makes the clamp rigid
*A:The distance needed between workpieces for
while machining the
clamp clearance, drill and tap mounting holes on
jaws to your specifithe center of “A” dimension.
**F:The amount of machinable stock on jaws.
cations, without vibration
***Mounting Screws included.
42
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Compact Toe Clamp
•Positive down force
•Cam action
•Clamp base should be Installed
in a slot to retain location
•Mounting screws included
•Available in three sizes
•Clamps can be used in series
•Clamp base provides for higher clamping – height is determined
by depth of slot
Part Cam Total Distance Key
Mounting
No. Screw of Movement Size
Screws
A
B
C
D
E*
F
G
35230 MB-6
.050
3/16 5/16-18 x 3/4 LH 1.70 .75 .50 1.00 .090 .75 .25
35231 MB-8
.100
5/16 3/8-16 x 3/4 LH
2.12 1.00 .45 1.32 .110 1.00 .38
35232 MB-10
.100
3/8 1/2-13 x 1 1/4 SHCS 2.95 1.50 .99 2.00 .130 1.50 .50
*“E” is the distance needed between the front of the clamp base & the workpiece.
Dyna-Force Clamp
•Incredible clamping and hold down power
•Low profile, compact design
•High quality stainless steel construction
•Easy to install
•Smooth or serrated
•Available in five sizes
F
B
E
G
C
D
A
Part Clamp Drive
No. Travel Screw
35240 2.0
6mm
35241 2.0
6mm
35242 2.2
8mm
35243 2.2
8mm
35244 3.8 10mm
35245 3.8 10mm
*”A” is body diameter
Key
Size
Clamp Jaw**
& Hardiness
A*
B
C
D
E
F
Min Opt Max
G
G
G
5mm
5mm
6mm
6mm
8mm
8mm
smooth 34RC
serrated 44RC
smooth 34RC
serrated 44RC
smooth 34RC
serrated 44RC
3.25
3.25
4.50
4.50
4.50
4.50
20.00
20.00
25.00
25.00
30.00
30.00
24.90
24.90
29.90
29.90
37.90
37.90
19.00
19.00
24.00
24.00
29.00
29.00
19.90
19.90
24.90
24.90
29.90
29.90
4.50
4.50
5.00
5.00
7.00
7.00
13.50
13.50
15.00
15.00
20.00
20.00
5.00
5.00
6.50
6.50
7.50
7.50
6.75
6.75
8.35
8.35
10.75
10.75
**Smooth jaw only will have relief cut
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
43
TOOLING COMPONENTS
Bodies for Swivel Screw Clamp Systems
•Material: 12L14 Steel on all screw parts
•Black Oxide Finish
•Order pads separately – see page 45
Hand Knob Head Swivel Screw Clamps
Use when hand tightening is necessary.
Thread
A
B
C
D
Part
No.
31121 1/4-20 1-15/32
31122 1/4-20 1-31/32
31131 5/16-18 1-15/32
31133 5/16-18 2-15/32
31141 3/8-16 1-7/16
31142 3/8-16 1-15/16
31144 3/8-16 2-15/16
31154 1/2-13 2-15/16
31155 1/2-13 3-15/16
3/4
3/4
7/8
7/8
1
1
1
1-1/2
1-1/2
1-1/8
1-1/8
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
Use with
Small Pad
Use with
Large Pad
Wt.
(lbs/100pcs)
31501
31501
31502
31502
31503
31503
31503
31504
31504
31601
31601
31602
31602
31603
31603
31603
31604
31604
5
5
7
8
10
12
14
31
35
Hex Socket Head Swivel Screw Clamps
Use when space is limited and greater clamping pressures are needed.
Thread
Use with
A
B
C
Small Pad
Part
No.
31221
31222
31223
31224
31231
31232
31233
31234
31241
31242
31243
31244
31252
31253
31255
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
15/32
23/32
31/32
1-15/32
23/32
31/32
1-15/32
1-31/32
11/16
15/16
1-7/16
1-15/16
15/16
1-7/16
2-15/16
3/32
3/32
3/32
3/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
31501
31501
31501
31501
31502
31502
31502
31502
31503
31503
31503
31503
31504
31504
31504
Use with
Large Pad
Wt.
(lbs/100pcs)
31601
31601
31601
31601
31602
31602
31602
31602
31603
31603
31603
31603
31604
31604
31604
*
*
1
1
*
*
2
3
1
2
3
4
2
5
6
Knurled Head Swivel Screw Clamps
Use when finger tightening provides adequate pressure.
44
Part
No.
Thread
A
B
C
D
31321 1/4-20 1-15/32
31322 1/4-20 1-31/32
31331 5/16-18 1-15/32
31332 5/16-18 1-31/32
31333 5/16-18 2-15/32
31341 3/8-16 1-7/16
31342 3/8-16 1-15/16
31343 3/8-16 2-7/16
31344 3/8-16 2-15/16
31354 1/2-13 2-15/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
Use with
Small Pad
Use with
Large Pad
Wt.
(lbs/100pcs)
31501
31501
31502
31502
31502
31503
31503
31503
31503
31504
31601
31601
31602
31602
31602
31603
31603
31603
31603
31604
8
12
9
13
14
18
19
20
21
26
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Pads for Swivel Screw Clamp Systems
•Used to secure clamping of soft metal or angular
surface without damaging workpiece
•Assembly includes: 1 Swivel Clamp Body and 1 Pad
•For material information, see individual components
•Material: 12L14 Steel
•Black Oxide Finish
•Left Hand internal threads
Small Pad
Part
No.
Fit Body
Thread
Size
A
B
C
(left hand)
31501
31502
31503
31504
1/4-20
5/16-18
3/8-16
1/2-13
8-36
12-28
1/4-28
5/16-24
0.193 3/16
19/64 1/4
21/64 19/64
25/64 13/32
Internal
Thread
Weight 1/16
3/64
1/16
1/16
(lbs/100pcs)
1 1
1
2
Large Pad
Part
No.
Body
Thread
Size
A
B
C
D
(left hand)
(lbs/100pcs)
31601
31602
31603
31604
1/4-20
5/16
5/16-18 23/64
3/8-16
7/16
1/2-13 27/64
8-36
12-28
1/4-28
5/16-24
1
1
1
2
3/8
1/2
9/16
3/4
1/8
9/64
11/64
1/8
1/8
5/32
3/16
3/16
Internal
Thread
Weight
Swivel Screw Clamp Assemblies
•Assembly includes: 1 Swivel Clamp Body and 1 Pad
•For material information, see individual components
Hand Knob Head Swivel Screw Clamp Assemblies
Small Pad
Part
No.
A
B
C
D
E
31121S
31122S
31131S
31133S
31141S
31142S
31144S
31154S
31155S
1/4-20
1/4-20
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1.50
2.00
1.50
2.50
1.50
2.00
3.00
3.00
4.00
3/4
3/4
7/8
7/8
1
1
1
1-1/2
1-1/2
1-1/8
1-1/8
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
3/16
3/16
1/4
1/4
19/64
19/64
19/64
13/32
13/32
Large Pad
Wt.
(lbs/100pcs)
6
7
8
9
11
13
15
33
37
Part
No.
A
B
C
D
E
31121L
31122L
31131L
31133L
31141L
31142L
31144L
31154L
31155L
1/4-20
1/4-20
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1.60
2.10
1.60
2.60
1.60
2.10
3.10
3.10
4.10
3/4
3/4
7/8
7/8
1
1
1
1-1/2
1-1/2
1-1/8
1-1/8
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
3/8
3/8
1/2
1/2
9/16
9/16
9/16
3/4
3/4
Wt.
(lbs/100pcs)
6
7
8
9
11
13
15
33
37
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
45
TOOLING COMPONENTS
Swivel Screw Clamp Assemblies
•Assembly includes: 1 Swivel Clamp Body and 1 Pad
•For material information, see individual components
Hex Head Swivel Screw Clamp Assemblies
Small Pad
Large Pad
Part
No.
A
B
C
D
31221S
31222S
31223S
31224S
31231S
31232S
31233S
31234S
31241S
31242S
31243S
31244S
31252S
31253S
31255S
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
0.53
0.78
1.03
1.50
0.77
1.02
1.52
2.02
0.75
1.00
1.50
2.00
1.00
1.50
3.00
3/32
3/32
3/32
3/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
19/64
19/64
19/64
19/64
13/32
13/32
13/32
(lbs/100pcs)
Weight
1
1
2
2
1
1
3
4
2
3
4
5
4
7
10
Part
No.
A
B
C
D
31221L
31222L
31223L
31224L
31231L
31232L
31233L
31234L
31241L
31242L
31243L
31244L
31252L
31253L
31255L
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
0.59
0.84
1.09
1.59
0.86
1.11
1.61
2.11
0.86
1.11
1.61
2.11
1.06
1.56
3.06
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
Weight
(lbs/100pcs)
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
3/4
3/4
3/4
1
1
2
2
1
1
3
4
2
3
4
5
4
7
10
Knurled Head Swivel Screw Clamp Assemblies
Small Pad
46
Part
No.
A
B
C
D
E
31321S
31322S
31331S
31332S
31333S
31341S
31342S
31343S
31344S
31354S
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1.50
2.03
1.51
2.02
2.52
1.50
2.00
2.50
3.00
3.00
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
3/16
3/16
1/4
1/4
1/4
19/64
19/64
19/64
19/64
13/32
Large Pad
Wt.
(lbs/100pcs)
9
13
10
14
15
19
20
21
22
28
Part
No.
A
B
C
D
E
31321L
31322L
31331L
31332L
31333L
31341L
31342L
31343L
31344L
31354L
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1.59
2.09
1.61
2.11
2.61
1.61
2.11
2.61
3.11
3.06
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
3/8
3/8
1/2
1/2
1/2
9/16
9/16
9/16
9/16
3/4
Wt.
(lbs/100pcs)
9
13
10
14
15
19
20
21
22
28
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Dog Point Hand Knob Screws
•Material:
– Knob: Cast Aluminum
– Stem: 12L14 Steel
•Stem only: Black Oxide Finish, Case Hardened
•Many sizes conform to TCMAI standards
•Use when hand tightening is necessary for holding or clamping
•Dog point prevents damage to end threads
Part
No.
Thread
A
B
C
D
E
31025
31026
31027
31031
31032
31040
31041
31042
31050
31051
31052
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
Part
No.
Thread
A
B
C
D
E
43801
43802
43803
43804
43805
43806
43807
43808
43809
43810
43813
43811
43812
43814
43815
10-24
10-24
10-24
10-32
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
Weight
(lbs/100pcs)
1-1/2 3/4 1-1/8 1-1/4
2
3/4 1-1/8 1-3/4
2-1/2 3/4 1-1/8 2-1/4
2
7/8 1-1/2 1-3/4
2-1/2 7/8 1-1/2 2-1/4
2-1/6
1
2
1-3/4
2-9/16
1
2
2-1/4
3-1/16
1
2
2-3/4
2-9/16 1-1/2 2-1/2 2-1/4
3-1/16 1-1/2 2-1/2 2-3/4
3-9/16 1-1/2 2-1/2 3-1/4
5
5
6
9
9
12
14
15
35
31
39
Dog Point Knurled Head Screws
•Material: 12L14 Steel
•Black Oxide Finish
•Case Hardened
•Many sizes conform to TCMAI standards
•Use for light clamping or holding
•Knurled head allows better grip
•Dog point prevents damage to end threads
•Special sizes quoted upon request
1
1-1/2
2
1-1/2
2
2-1/2
1-1/2
1-1/2
2
2-1/2
2
2-1/2
3
3
3-1/2
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
3/4
3/4
3/4
3/4
1
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
Weight
(lbs/100pcs)
3/4
1-1/4
1-3/4
1-3/8
1-3/4
2-1/4
1-1/4
1-1/4
1-3/4
2-1/4
1-3/4
2-1/4
2-3/4
2-3/4
3-1/4
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
3
3
3
3
5
9
9
6
11
13
13
24
27
28
30
47
TOOLING COMPONENTS
Quarter Turn Screws
•Material: 1018 Steel
•Black Oxide Finish
•Many sizes conform to TCMAI standards
•Chamfered corners for self alignment of screw
Part
No.
Thread
A
B
C
D
E
43901
43902
43903
43904
43905
10-24
10-32
1/4-20
5/16-18
3/8-16
1
1
1-1/4
1-1/2
1-1/2
1/2
1/2
5/8
3/4
1
3/16
3/16
1/4
5/16
3/8
1/2
1/2
3/4
1
1
Weight
(lbs/100pcs)
3
3
5
9
11
Lock Screws
Slotted Lock Screws
Part Thread
Wt.
No.
A
B
C
D
E
F
(lbs/100pcs)
79110 8-32
7/16
3/16
5/16
3/16 .094/1.00
1
79111 5/16-18 5/8
3/8
5/8
1/4 .132/.128
2
79112 5/16-18 7/8
3/8
5/8
3/8 .194/.200
3
79113 3/8-16
1
7/16
3/4
3/8 .194/.200
4
79114 3/8-16 1-1/16 7/16
3/4
7/16 .225/.231
5
79115 3/8-16 1-1/8 7/16
3/4
1/2 .257/.263
5
Socket Head Lock Screws
Part Thread
No.
A
B
C
D
E
F
79130 8-32
7/16
3/16
5/16
3/16 .094/.100
79131 5/16-18 5/8
3/8
5/8
1/4 .132/.138
79132 5/16-18 7/8
3/8
5/8
3/8 .194/.200
79133 3/8-16
1
7/16
3/4
3/8 .194/.200
79134 3/8-16 1-1/16 7/16
3/4
7/16 .225/.231
79135 3/8-16 1-1/8 7/16
3/4
1/2 .257/.263
48
Hex
G
Wt.
(lbs/100pcs)
3/32
3/16
3/16
7/32
7/32
7/32
1
2
3
4
5
5
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Cast Aluminum Hand Knobs
•Many sizes conform to TCMAI standards
•Available tapped through, blank, or tapped
part way through
•Blank knob includes a cast center which
eliminates center drilling
•Use as a handle or clamping knob
Part
No.
A
B
C
D
43305
43307
43308
43309
43311
43312
43313
43315
43316
43317
43319
43320
43325
43327
1-1/8
1-1/8
1-1/8
1-1/2
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
2-1/2
3
3
3/4
3/4
3/4
7/8
7/8
7/8
1
1
1
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
Thread Thread Thread Weight
No. 1
No. 2
Depth (lbs/100pcs)
1/2
1/4-20
-
1/2
-
-
1/2
-
1/4-20
19/32 5/16-18
-
19/32
-
-
19/32
-
5/16-18
11/16 3/8-16
-
11/16
-
-
11/16
-
3/8-16
1-1/16 1/2-13
-
1-1/16
-
-
1-1/16
-
1/2-13
1-1/4 3/4-10
-
1-1/4
-
-
Thru
Blank
3/8
Thru
Blank
7/16
Thru
Blank
1/2
Thru
Blank 3/4
Thru
Blank
3
4
3
4
5
4
6
8
6
16
19
16
26
33
Plastic Ball Knobs
Part
No.
•Material: Black Plastic
•Lightweight, plastic construction keeps ball rust free
•Blank knob includes a cast center, which eliminates
center drilling
Thread
A
B
C
D
43601
10-32
43602
1/4-20
43603
1/4-28
43604 5/16-18
43605 5/16-24
43606
3/8-16
43607
3/8-24
43608
1/2-13
43609
1/2-20
43612
1/2-13
43613
1/2-20
43614* 5/8-18
*Molded Threads
3/4
1
1
1
1
1-3/8
1-3/8
1-3/8
1-3/8
1-7/8
1-7/8
1-7/8
5/16
7/16
7/16
7/16
7/16
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
7/8
Brass Weight
Insert (lbs/100pcs)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
2
4
4
4
4
8
8
8
8
20
20
20
49
TOOLING COMPONENTS
Threaded Flat Rest Pads
•Material: 1117 Steel
•Black oxide finish on all surfaces not qualified
•Case hardened
•Use to support and position workpiece
•Especially effective when supporting flat surfaces
Part
Thread
No.
A
6003
5
56004
56005
56013
56014
56015
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
+.0000
-.0003
B
0.50
0.75
1.00
0.50
0.75
1.00
Dia.
C
D
1
1
1
1
1
1
7/16
7/16
7/16
7/16
7/16
7/16
Wt.
(lbs/100 pcs)
12
12
12
12
12
12
Threaded Stack Rest Pads
•Material: 1117 Steel
•Black oxide finish on all surfacesnot qualified
•Case hardened
•Use to support and position workpiece
•Internal threads allow rest pads to be stacked to
support workpiece at desired height
50
+.0000
Part
Thread -.0003
No.
A
B
56106
6107
5
1/2-13
1/2-13
0.75
1.00
Dia.
C
D
E
1
1
7/16 1/2-13 x .48 dp
7/16 1/2-13 x .48 dp
Wt.
(lbs/100 pcs)
12
12
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Threaded Rest Pads with Self-Aligning Gripper
• Material:
– Body: 4140 Steel
– Ball: 52100 Steel
•Black oxide finish on all surfaces not qualified
•Case hardened
•Self-aligning gripper ball enables rest pad
to effectively support and position rough
or uneven workpiece surfaces
•Gripper ball swivels 10 degrees in any direction
+.000
Part
Thread -.005 Dia.
No.
A
B
C
D
E
F
56801
56802
56803
56804
3/8-16
3/8-16
1/2-13
1/2-13
0.75
1.00
0.75
1.00
3/4
3/4
3/4
3/4
3/8
3/8
3/8
3/8
0.093
0.093
0.093
0.093
.44
.44
.44
.44
Wt.
(lbs/100 pcs)
12
12
12
12
Threaded Rest Pads with Self-Aligning Ball
• Material:
– Body: 4140 Steel
– Ball: 52100 Steel
• Black oxide finish on all surfaces not qualified
• Case hardened
• Use to support and position workpiece
• Self-aligning ball enables rest pad to effectively
support and position smooth workpiece surfaces
• Ball swivels 10 degrees in any direction
+.000
Part
Thread -.005
No.
A
B
Dia.
C
D
E
56400
56401
56402
56410
56411
56412
3/4
3/4
3/4
3/4
3/4
3/4
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
0.50
0.75
1.00
0.50
0.75
1.00
7/16
7/16
7/16
7/16
7/16
7/16
3/8
3/8
3/8
3/8
3/8
3/8
Wt.
(lbs/100 pcs)
12
12
12
12
12
12
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
51
TOOLING COMPONENTS
Taper Index Plungers
Finished and Unfinished Ground
•For material information, contact TE-CO
•Many sizes conform to TCMAI standards
•Bushing not included – order separately
(see below)
Finished Ground
Part
Use with
No.
A*
B
C
D
E
F
G
H
J
K
Lbs.** Bushing No.
54900 .7518/.7515
7/8 7/16 1/2
1-3/8 5/16 1/2
1/2
3/32
5/16
22
54970
54902 1.1268/1.1265 1-1/4 9/16 3/4
2
3/8 3/4
3/4
1/8
3/8
48
54972
54904 1.5022/1.5018 1-5/8 11/16
1
2-1/4 3/8
1
1
1/8
7/16
68
54974
Wt.
(lbs/100 pcs)
22
67
135
Unfinished Ground
Part
Use with
No.
A*
B
C
D
E
F
G
H
J
K
Lbs.** Bushing No.
54901
.770/.765
7/8 7/16 1/2
1-3/8 5/16 1/2
1/2
3/32
5/16
22
54971
54903 1.145/1.140
1-1/4 9/16 3/4
2
3/8 3/4
3/4
1/8
3/8
48
54973
54905 1.520/1.515 1-5/8 11/16
1
2-1/4 3/8
1
1
1/8
7/16
68
54975
Wt.
(lbs/100 pcs)
22
67
135
*For proper installation use nominal drill diameter
**Approximate poundage required to completely retract plunger.
Taper Index Bushings
Finished and Unfinished Ground
Finished Ground
Part
No.
A*
B
C
+.002
-.000
Wt.
D
(lbs/100 pcs)
54970 .7518/.7515
4972 1.1268/1.265
5
54974 1.5022/1.5018
0.483
0.738
0.988
7/8
1-1/4
1-5/8
1/2
5/8
3/4
5
12
25
Unfinished Ground
52
Part
No.
A*
B
C
+.002
-.000
Wt.
D
(lbs/100 pcs)
54971
54973
54975
0.483
0.738
0.988
.770/.765
1.145/1.140
1.520/1.515
7/8
1-1/4
1-5/8
1/2
5/8
3/4
5
12
25
*For proper installation use nominal drill diameter
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Straight Index Plungers
Finished and Unfinished Ground
•For material information, contact TE-CO
•Many sizes conform to TCMAI standards
•Bushing not included – order separately (see below)
Finished Ground
Part
Use with
No.
A*
B
C
D
E
F
G
H
J
K
Lbs.** Bushing No.
54910 .7518/.7515
7/8 7/16 1/2
1-3/8 23/64 1/2
1/2
1/8
5/16
22
54980
54912 1.1268/1.1265 1-1/4 9/16 3/4
2
33/64 3/4
3/4
1/8
3/8
55
54982
54914 1.5022/1.5018 1-5/8 11/16
1
2-1/4 5/8
1 15/16 1/8
7/16
90
54984
54916 2.0023/2.0019 2-3/16 *** 1-3/8
3
27/32 1 15/16 3/16
***
150
54986
Wt.
(lbs/100 pcs)
22
69
139
300
Unfinished Ground
Part
Use with
No.
A*
B
C
D
E
F
G
H
J
K
Lbs.** Bushing No.
54911
.770/.765
7/8 7/16 1/2
1-3/8 23/64 1/2
1/2
1/8
5/16
22
54981
54913 1.145/1.140
1-1/4 9/16 3/4
2
33/64 3/4
3/4
1/8
3/8
55
54983
54915 1.520/1.515 1-5/8 11/16 1
2-1/4 5/8
1 15/16 1/8
7/16
90
54985
54917 2.020/2.015 2-3/16 *** 1-3/8
3
27/32 1 15/16 3/16
***
150
54987
Wt.
(lbs/100 pcs)
22
69
139
300
*For proper installation use nominal drill diameter
**Approximate poundage required to completely retract plunger
***Whistle notch not included for this part number
Straight Index Bushings
Finished and Unfinished Ground
Finished Ground
Part
No.
A*
B
C
D
J
54980 .7518/.7515
7/8
54982 1.1268/1.265
1-1/4
54984 1.5022/1.5018 1-5/8
54986 2.0023/2.0019 2-3/16
1/2
5/8
3/4
1
1/2
3/4
1
1-3/8
1/8
1/8
1/8
3/16
Wt.
(lbs/100 pcs)
4
10
22
50
Unfinished Ground
Part
No.
A*
B
C
D
J
54981
54983
54985
54987
.770/.765
1.145/1.140
1.520/1.515
2.020/2.015
7/8
1-1/4
1-5/8
2-3/16
1/2
5/8
3/4
1
1/2
3/4
1
1-3/8
1/8
1/8
1/8
3/16
Wt.
(lbs/100 pcs)
4
10
22
50
*For proper installation use nominal drill diameter
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
53
TOOLING COMPONENTS
Rotary Cam Operated Taper Index Plungers
Finished and Unfinished Ground
•For material information, contact TE-CO
•Many sizes conform to
TCMAI standards
•Bushing not included –
see page 53
•Vertical cam allows for
quick vertical motion
Finished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54920 .7518/.7515
7/8 7/16 1/2
1-3/8 5/16 1-1/8
3
3/32
5/16
54922 1.1268/1.1265 1-1/4 9/16 3/4
2
3/8 1-1/2 3-1/2
1/8
3/8
54924 1.5022/1.5018 1-5/8 11/16
1
2-1/4 3/8 1-7/8 4-1/2
1/8
7/16
Use with
Wt.
Bushing No. (lbs/100 pcs)
54970
54972
54974
35
91
184
Unfinished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54921
.770/.765
7/8 7/16 1/2
1-3/8 5/16 1-1/8
3
3/32
5/16
54923 1.145/1.140
1-1/4 9/16 3/4
2
3/8 1-1/2 3-1/2
1/8
3/8
54925 1.520/1.515 1-5/8 11/16
1
2-1/4 3/8 1-7/8 4-1/2
1/8
7/16
Use with
Wt.
Bushing No. (lbs/100 pcs)
54971
54973
54975
35
91
184
*For proper installation use nominal drill diameter
Vertical Cam Operated Taper Index Plungers
Finished and Unfinished Ground
•For material information, contact TE-CO
•Many sizes conform to TCMAI standards
•Bushing not included –
see page 53
•Vertical cam allows for
quick vertical motion
Use line art
image above
(Rotary style)
for dimensions
A-F, J, and K.
Finished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54930 .7518/.7515
7/8 7/16 1/2
1-3/8 5/16
1
3
3/32
5/16
54932 1.1268/1.1265 1-1/4 9/16 3/4
2
3/8 1-5/16 3-1/2
1/8
3/8
54934 1.5022/1.5018 1-5/8 11/16
1
2-1/4 3/8 1-7/16 4-1/2
1/8
7/16
Use with
Wt.
Bushing No. (lbs/100 pcs)
54970
54972
54974
32
90
163
Unfinished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54931
.770/.765
7/8 7/16 1/2
1-3/8 5/16
1
3
3/32
5/16
54933 1.145/1.140
1-1/4 9/16 3/4
2
3/8 1-5/16 3-1/2
1/8
3/8
54935 1.520/1.515
1-5/8 11/16
1
2-1/4 3/8 1-7/16 4-1/2
1/8
7/16
Use with
Wt.
Bushing No. (lbs/100 pcs)
54971
54973
54975
32
90
163
*For proper installation use nominal drill diameter
54
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Rotary Cam Operated Straight Index Plungers
Finished and Unfinished Ground
•For material information, contact TE-CO
•Many sizes conform to TCMAI standards
•Bushing not included – see page 53
•Rotary cam allows for quick horizontal motion
Finished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54940 .7518/.7515
7/8 7/16 1/2
1-3/8 23/64 1-1/8
3
1/8
5/16
54942 1.1268/1.1265 1-1/4 9/16 3/4
2
33/64 1-1/2 3-1/2
1/8
3/8
54944 1.5022/1.5018 1-5/8 11/16
1
2-1/4 5/8 1-7/8 4-1/2
1/8
7/16
54946 2.0023/2.0019 2-3/16 ** 1-3/8
3
27/32 2-1/8 5-3/4 3/16
**
Use with
Bushing No.
Wt.
(lbs/100 pcs)
54980
54982
54984
54986
35
92
185
418
Use with
Bushing No.
Wt.
(lbs/100 pcs)
54981
54983
54985
54987
35
92
185
418
Unfinished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54941
.770/.765
7/8 7/16
1/2 1-3/8 23/64 1-1/8
3
1/8
5/16
54943 1.145/1.140
1-1/4 9/16
3/4
2
33/64 1-1/2 3-1/2
1/8
3/8
54945 1.520.1.515
1-5/8 11/16
1
2-1/4 5/8 1-7/8 4-1/2
1/8
7/16
54947 2.020/2.015 2-3/16 **
1-3/8
3
27/32 2-1/8 5-3/4 3/16
**
*For proper installation use nominal drill diameter
**Whistle notch not included for this part number
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
55
TOOLING COMPONENTS
Vertical Cam Operated Straight Index Plungers
Finished and Unfinished Ground
Rotary Cam Operated Straight
Index Plunger line art shown
here for reference only.
•For material information, contact TE-CO
•Many sizes conform to TCMAI standards
•Bushing not included – see page 53
•Vertical cam allows for quick vertical motion
Use line art image on
pg. 56 (Rotary style)
for dimensions
A-F, J, and K.
Finished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54950 .7518/.7515
7/8 7/16 1/2
1-3/8 23/64 1
3
1/8
5/16
54952 1.1268/1.1265 1-1/4 9/16 3/4
2
33/64 1-5/16 3-1/2 1/8
3/8
54954 1.5022/1.5018 1-5/8 11/16
1
2-1/4 5/8 1-7/16 4-1/2 1/8
7/16
54956 2.023/2.0019 2-3/16 ** 1-3/8
3
27/32 1-5/8 5-3/4 3/16
**
Use with
Bushing No.
Wt.
(lbs/100 pcs)
54980
54982
54984
54986
33
90
167
354
Use with
Bushing No.
Wt.
(lbs/100 pcs)
54981
54983
54985
54987
33
90
167
354
Unfinished Ground
Part
No.
A*
B
C
D
E
F
G
H
J
K
54951
.770/.765
7/8 7/16 1/2
1-3/8 23/64 1
3
1/8
5/16
54953 1.145/1.140
1-1/4 9/16 3/4
2
33/64 1-5/16 3-1/2 1/8
3/8
54955 1.520.1.515 1-5/8 11/16
1
2-1/4 5/8 1-7/16 4-1/2 1/8
7/16
54957 2.020/2.015 2-3/16 ** 1-3/8
3
27/32 1-5/8 5-3/4 3/16
**
*For proper installation use nominal drill diameter
**Whistle notch not included for this part number
56
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Tapped Jig Feet
•Material: 1018 Steel, Black Oxide Finish
•Case Hardened
•Use to support or locate workpiece.
•Use to raise jigs and fixures off of machine table
Part
No.
+.001
-.000
A
B
C
D
4150
4
44151
44152
44153
44154
44155
44156
44157
44158
44159
3/8
1/2
3/4
1
1/2
3/4
1
3/4
1
1-1/2
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1-1/4
1-1/4
1-1/4
10-32
10-32
10-32
10-32
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/4
1/4
5/16
5/16
5/16
1/2
1/2
9/16
9/16
9/16
Wt.
(lbs/100 pcs)
3
4
6
8
8
12
16
24
32
49
Button Jig Feet
#Socket Head Cap Screw
*Flat Head Cap Screw
•Material: 12L14 Steel, Black Oxide Finish
•Case Hardened
•Many sizes conform to TCMAI standards.
•Screw not furnished
•Length dimension is finished ground
•Use to locate or support workpiece
•Use to raise jigs and fixures off machine table
Part
No.
+.001
-.000
A
B
Screw
Type &
Size
Wt.
(lbs/100 pcs)
4103
4
44104
44105
44107
44109
44110
44111
44113
44115
44117
44118
44119
44120
44121
44122
3/8
1/2
1/4
3/8
1/2
5/8
3/4
1
1/2
3/4
1
3/4
1
1-1/2
2
10-32*
10-32*
10-32*
1/4#
1/4#
1/4#
1/4#
1/4#
5/16#
5/16#
5/16#
3/8#
3/8#
3/8#
3/8#
1
2
1
2
3
4
5
7
6
10
13
21
29
44
60
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1-1/4
1-1/4
1-1/4
1-1/4
Pre-Set Buttons
•Material: 12L14 Steel
•Black Oxide Finish
•Case Hardened
•Many sizes conform to TCMAI standards
Part
No.
A
B
C
D
E
F
G
44290
44291
44292
44293
44294
10-32
1
14/-28 1-1/2
3/8-24
2
1/2-20 2-1/2
5/8-18
3
1/4
3/8
1/2
5/8
3/4
3/16 1/8 1/8
1/4 3/16 3/16
3/8 1/4 1/4
1/2 5/16 5/16
5/8 3/8 3/8
1/8
3/16
1/4
5/16
3/8
Wt.
(lbs/100pcs)
1
2
6
13
25
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
57
TOOLING COMPONENTS
Press Fit Rest Buttons –
Unfinished Ground
Part
No.
A
4201
4
44202
44203
44204
44205
44206
44207
44208
44209
44210
44211
44212
44213
44214
44215
44216
44217
44218
44220
44221
44222
44223
44224
44225
44226
44227
44228
44229
44230
44231
•Material: 1144 Stressproof Steel
•Through Hardened
•Black Oxide Finish on unqualified surfaces
•Many sizes conform to TCMAI standards
•Finished ground quoted upon request
+.015
+.005
B
C
D
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
7/8
7/8
7/8
1
1
1
1-1/4
1-1/4
1/2
1/2
1/2
5/8
5/8
7/8
7/8
1
1
1-1/4
1-1/4
1-1/2
1/4
.1880/.1885
3/8
.1880/.1885
1/2
.1880/.1885
1/4
.2505/.2510
3/8
.2505/.2510
1/2
.2505/.2510
1/4
.3755/3760
3/8
.3755/3760
1/2
.3755/.3760
5/8
.3755/.3760
3/8
.5005/.5010
1/2
.5005/.5010
5/8
.5005/.5010
3/8
.6255/.6260
1/2
.6255/.6260
5/8
.6255/.6260
1/2
.7505/.7510
5/8
.7505/.7510
1/4
.3130/.3135
3/8
.3130/.3135
1/2
.3130/.3135
7/16
.3755/.3760
3/4
.3755/.3760
7/16
.5005/.5010
3/4
.5005/.5010
7/16
.6255/.6260
3/4
.6255/.6260
3/8
.7505/.7510
7/16
.7505/.7510
3/4 1.0005/1.0010
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1
Wt.
(lbs/100 pcs)
1
1
2
2
3
3
4
5
6
7
10
12
14
15
18
20
28
32
2
3
4
6
8
1
16
16
23
24
26
59
Threaded Rest Buttons
Finished & Unfinished Ground
•Material: 1117 Steel
•Black Oxide Finish
•Case Hardened
•Many sizes conform to TCMAI standards
58
Part No.
Unfinished
Ground
“B” Dim.
+.015
+.005
44801
44802
44803
44804
44805
44806
44807
44808
44809
44810
44811
44812
44813
44814
44815
44816
Part No.
Finished
Ground
“B” Dim.
+.001
-.000
A
B
44821
44822
44823
44824
44825
44826
44827
44828
44829
44830
44831
44832
44833
44834
44835
44836
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
5/8
3/4
1
Thread
C
D
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
Wt.
(lbs/100pcs)
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
1
2
2
3
3
3
3
4
6
7
5
6
7
8
10
12
TOOLING COMPONENTS
Plain Fixture Keys
• Material: 1018 Steel
• Black Oxide Finish
• Case Hardened
• Many sizes conform to TCMAI standards
• Precision Ground
• Use to accurately align fixture
on machine table
• Special sizes quoted upon request
Part
No.
A
4501
4
44502
44503
44504
44505
44506
3/4
3/4
3/4
1
1-1/4
1-1/4
+.0000
-.0005
B
C
.5000
.5625
.625
.6875
.750
.8125
Socket
Head Screw
D
Wt.
(lbs/100 pcs)
1/4
1/4
5/16
5/16
5/16
5/16
4
5
6
8
11
13
1/2
1/2
1/2
1/2
1/2
1/2
Round Fixture Keys: Locking & Standard
• Material: 1018 Steel
• Black Oxide Finish
• Case Hardened
• Use to accurately align fixture on machine table
• Use standard keys on through holes
• Use locking keys in blind holes
• Locking keys are easily locked into position and removed
• Locking key assembly includes:
– Fixture Key
– Socket Head Cap Screw
– Split Ring
– Taper Plunger
• Split ring expands in hole by turning screw
Locking
Part
No.
Wt.
(lbs/100 pcs)
44520
44521
44522
44523
8
8
9
9
Standard
Part
Wt.
No.
(lbs/100 pcs)
44510
44511
44512
44513
5
6
6
6
+.000
-.001
A
+.000
-.001
B
5/8
11/16
11/16
3/4
11/16
3/4
13/16
13/16
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
59
TOOLING COMPONENTS
Precision Fixture Keys
•Material: 1018 Steel
•Black Oxide Finish
•Case Hardened
•Precision Ground
•Use to accurately align
fixture on machine table
Part
No.
44530
44531
44532
44533
44534
+.0000
-.0002
A
B
C
D
E
F
G
0.3748 15/16
0.4998 1-1/4
0.6248 1-9/16
0.7498 1-7/8
0.9998 2-1/2
3/8
1/2
5/8
3/4
1
10-24
1/4-20
1/4-20
5/16-18
5/16-18
15/32
5/8
25/32
15/16
1-1/4
9/32
3/8
31/64
9/16
3/4
9/16
3/4
15/16
1-1/8
1-1/2
Wt.
(lbs/100 pcs)
3
6
13
24
55
Radius End Precision Fixture Keys
•Material: 1018 Steel
•Black Oxide Finish
•Case Hardened
•Precision Ground
•Use to accurately align
fixture on machine table
Part
No.
44540
44541
44542
44543
44544
+.0000
-.0002
A
B
C
D
E
F
G
0.3748
0.4998
0.6248
0.7498
0.9998
15/16
1-1/4
1-9/16
1-7/8
2-1/2
3/8
1/2
5/8
3/4
1
10-24 15/32
1/4-20
5/8
1/4-20 25/32
5/16-18 15/16
5/16-18 1-1/4
9/32
3/8
31/64
9/16
3/4
9/16
3/4
15/16
1-1/8
1-1/2
Wt.
(lbs/100 pcs)
2
5
12
21
50
Toggle Pads
60
Black
Part
No.
Yellow
Part Thread
No.
A
B
C
D
E
44302
44303
44304
44305
44306
44307
44308
44362
44363
44364
44365
44366
44367
44368
1/4-20 5/8
5/8
1/2
5/16-18 11/16 11/16 9/16
3/8-16 3/4
3/4
5/8
1/2-13 7/8
1
3/4
5/8-11
1
1-1/16 7/8
3/4-10 1-1/4 1-5/16 1-1/16
1-8
1-5/8 1-11/16 1-3/8
13/32
7/16
1/2
17/32
9/16
3/4
1
Weight
(lbs/100pcs)
4
5
6
10
16
25
60
•Material: 12L14 Steel
•Black Oxide Finish or Zinc
Plate Yellow Chromate Finish
•Case Hardened
•Many sizes conform to
TCMAI standards.
•Pads swivel 10 degrees
from vertical in any direction
•Assures positive gripping
•Use when high clamping pressures are required
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Leveling Pads
Part
No.
Thread
A
B
C
D
E
44401
44402
44403
44404
3/8-16
1/2-13
5/8-11
3/4-10
1-1/4 7/8
5/8
1-7/8 1-1/8 3/4
2-1/2 1-1/4 7/8
3
1-1/2 1-1/16
3/16
1/4
5/16
1/2
Load
Limits
(lbs/100pcs)
Weight
3750 lbs.
5000 lbs.
6000 lbs.
7200 lbs.
14
47
67
138
•Material: 12L14 Steel
•Black Oxide Finish
•Case Hardened
•Many sizes conform to TCMAI standards
•Pads swivel 10 degrees from vertical in
any direction
•Large pad diameter provides solid support
•Use as a foot for machine tools, branches, electronic racks, etc.
•Special sizes quoted upon request
Zinc Plated Leveling Pads
•Material: 12L14 Steel with Zinc Plate
Yellow Chromate Finish
•Many sizes conform to TCMAI standards
•Pads swivel 10 degrees from vertical in
any direction
•Large pad diameter provides solid support
•Use as a foot for machine tools, benches, electronic racks, etc.
•Special sizes quoted upon request
Part
No.
Thread
A
B
C
D
E
44431
44432
44433
44434
3/8-16
1/2-13
5/8-11
3/4-10
1-1/4 7/8
5/8
1-7/8 1-1/8 3/4
2-1/2 1-1/4 7/8
3
1-1/2 1-1/16
3/16
1/4
5/16
1/2
Load
Limits
(lbs/100pcs)
Weight
3750 lbs.
5000 lbs.
6000 lbs.
7200 lbs.
14
47
67
138
Leveling Pad & Stud Assembly
•Material: 12L14 Steel with Zinc Plating
•Zinc coating deters rust
•Integral stud and hardened ball swivels
10 degrees from vertical in any direction.
•Swivel action facilitates leveling of machine tools, benches, electronic racks, etc. – even on rough surfaces
Part
No.
A
Thread
B
C
D
44450
44451
44452
44453
3/8-16
1/2-13
5/8-11
3/4-10
2-7/8
3-1/8
3-1/4
3-1/2
1-1/4
1-7/8
2-1/2
3
2-1/32
1-31/32
1-15/16
1-31/32
Load
Limits
(lbs/100pcs)
Weight
3750 lbs.
5000 lbs.
6000 lbs.
7200 lbs.
22
54
102
184
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
61
TOOLING COMPONENTS
Leveling Mount –
Light Duty
Poly Pads – Stud Style NEW
NEW
Ball and stud assembly are CNC machined
from solid bar stock. Zinc plated with
integrated stop collar. Lock nut included.
Ideal for use on light duty
machinery, fitness equipment
and other light duty applications.
•Material:
- Pad: 30% glass fiber
filled nylon
- Stud: 1117 zinc
plated steel
•Pop-out caps expose
holes for floor
mounting
•Volume order
stainless steel
version available
•Chrome plated steel cup
•Zinc plated steel stud
•Hard nylon or soft TPR
anti-skid bases available
•Special order stainless
steel version available
High quality, low cost
Part
No.
A
B
C
1100
7
71101
71102
71103
71104
71105
71106
71107
1.14
1.38
1.38
1.65
1.97
2.24
2.56
2.95
1.37
1.50
1.50
1.87
1.62
1.62
1.62
2.12
1/4-20 x 1
1/4-20 x 1
5/16-18 x 1 5/16-18 x 1-3/8
3/8-16 x 1
3/8-16 x 1
1/4-20 x 1
3/8-16 x 1-3/16
Pad
Material
PP
Nylon/TPR
Nylon/TPR
Nylon/TPR
Nylon/TPR
Nylon/TPR
Nylon
PP
Poly Pads – Tapped Style
NEW
Ball and tapped hex are CNC
machined from solid bar stock.
Zinc plated with integrated
stop collar.
•Material:
- Pad: 30% glass fiber filled nylon
- Hex nut: 1117 zinc plated steel
•Pop-out caps expose holes
for floor mounting
•Volume order stainless
steel version available
71140
71141
71142
71143
71144
71145
71146
71147
71148
.257
.257
.257
.354
.354
.354
.413
.413
.413
.944
.944
.944
.944
.944
.944
.944
.944
.944
3/8-16
1/2-13
5/8-11
3/8-16
1/2-13
5/8-11
3/8-16
1/2-13
5/8-11
Strong, durable, economical
62
71109
71110
71112
71113
71115
71116
71117
71119
71120
71122
71123
71125
71126
71127
71129
71130
71132
71133
71135
71136
71137
.257
.257
.257
.257
.257
.257
.257
.354
.354
.354
.354
.354
.354
.354
.413
.413
.413
.413
.413
.413
.413
1.97
1.97
1.97
1.97
1.97
1.97
1.97
3.15
3.15
3.15
3.15
3.15
3.15
3.15
4.33
4.33
4.33
4.33
4.33
4.33
4.33
5.29
7.29
5.29
7.29
5.29
6.29
7.29
5.29
7.29
5.29
7.29
5.29
6.29
7.29
5.53
7.53
5.53
7.53
5.53
6.53
7.53
3/8-16 x 4
3/8-16 x 6
1/2-13 x 4
1/2-13 x 6
5/8-11 x 4
5/8-11 x 5
5/8-11 x 6
3/8-16 x 4
3/8-16 x 6
1/2-13 x 4
1/2-13 x 6
5/8-11 x 4
5/8-11 x 5
5/8-11 x 6
3/8-16 x 4
3/8-16 x 6
1/2-13 x 4
1/2-13 x 6
5/8-11 x 4
5/8-11 x 5
5/8-11 x 6
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
.55
4000 lbs.
4000 lbs.
4000 lbs.
4000 lbs.
4000 lbs.
4000 lbs.
4000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
6000 lbs.
6000 lbs.
6000 lbs.
NEW
Strong and economical
leveler with fixed
non-swivel base.
Lag
Max Load
Hole Hex
Rating
1.66
1.66
1.66
1.66
1.66
1.66
1.91
1.91
1.91
Lag Wrench Max Load
Hole
Flat
Rating
Thermoplastic Fixed Foot
Part
No.
A
B
C
Tap
1.97
1.97
1.97
3.15
3.15
3.15
4.33
4.33
4.33
Part
No.
A
B
C
5/8
3/4
7/8
5/8
3/4
7/8
5/8
3/4
7/8
4000 lbs.
4000 lbs.
4000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
4000 lbs.
5000 lbs.
6000 lbs.
•Material:
-Base: Reinforced
PA6 nylon
-Stud: Zinc
plated steel
Shown with optional non-skid rubber pad
Part
No.
A
D
d
H
h
71150
71151
71152
71153
1.50
1.75
1.50
1.75
1.26
1.26
1.57
1.57
5/16-18
1/2-13
5/16-18s
3/8-16
2.01
2.26
2.01
2.26
.51
.51
.51
.51
Load
Rating
Pad
No.
1760 lbs.
1760 lbs.
1760 lbs.
1760 lbs.
NSP-01
NSP-01
NSP-02
NSP-02
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Ball Bearing Parallels
•Material:
– Plate: 1018 Steel
– Balls: Grade 200 Carbon Steel
•Black oxide finish on plate
•Designed to ease movement of heavy loads when machining
•Load capacity per ball: 3,000 lbs.
•All plates are 1/4” thick x 2-1/2” wide
•Balls are 3/8” diameter
Part
No. Length
50201
50202
50203
6
12
18
Number of
Balls per
Wt.
Plate
(lbs/100 pcs)
18
36
54
105
209
313
Ball Bearing Parallel Kits
Part
Plate
No.
No.
•Material:
– Plate: 1018 Steel
– Balls: Grade 200 Carbon Steel
•Black oxide finish on plate
•Designed to ease movement of heavy loads when machining
•Load capacity per ball: 3,000 lbs.
•All plates are 1/4” thick x 2-1/2” wide
•Balls are 3/8” diameter
50204
50205
50201
50202
Number of
Plates per
Wt.
Kit
(lbs/kit)
4
2
4.25
6.39
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
63
TOOLING COMPONENTS
TE-CO Threaded
Insert Kits
Installation Instructions:
Quantity
Part
of
Insert
Internal
No.
Inserts
Part No.
Thread
External
Thread
Coarse Thread/Fine Thread – Steel
42370
10
10
10
10
6
42313
42314
42315
42316
42318
10-24
1/4-20
5/16-18
3/8-16
1/2-13
3/8-16
7/16-14
1/2-13
9/16-12
3/4-10
42371
6
7
7
2
42318
42320
42322
42323
1/2-13
5/8-11
3/4-10
1-8
3/4-10
7/8-9
1/8
1 3/8-12
42372
10
10
10
10
6
42324
42325
42326
42327
42329
10-32
1/4-28
5/16-24
3/8-24
1/2-20
3/8-16
7/16-14
1/2-13
9/16-12
3/4-10
42373
1. Drill hole according to table.
TE-CO insert can be used in extra
deep or through hole.
Metric Internal/U.S. External – Steel
10
10
10
6
42332
42333
42334
42335
M6 x 1.0
M8 x 1.25
M10 x 1.5
M12 x 1.75
3/8-16
1/2-13
9/16-12
3/4-10
Quantity
Part
of
Insert
Internal
No.
Inserts
Part No.
Thread
External
Thread
Metric Internal/Metric External – Steel
42374
42375
64
10
10
10
10
10
42338
42339
42340
42341
42342
M3 x 0.5
M6 x 1.0
M4 x 0.7 M8 x 1.25
M5 x 0.8 M8 x 1.25
M6 x 1.0 M10 x 1.5
M8 x 1.25 M12 x 1.75
10
10
8
5
42342
42343
42344
42345
M8 x 1.25
M10 x 1.5
M12 x 1.75
M16 x 2.0
2. Use standard size tap according to table.
M12 x 1.75
M16 x 2.0
M16 x 2.0
M24 x 3.0
303 Stainless Steel, Passivated
42376
42377
10
10
10
10
6
42346
42347
42348
42349
42351
10-24
1/4-20
5/16-18
3/8-16
1/2-13
3/8-16
7/16-14
1/2-13
9/16-12
3/4-10
10
10
10
10
6
42352
42353
42354
42355
42357
10-32
1/4-28
5/16-24
3/8-24
1/2-20
3/8-16
7/16-14
1/2-13
9/16-12
3/4-10
3. Use bolt as illustrated to install TE-CO Insert. Nut prevents hang-up of TE-CO Insert on grip
of bolt. Use two nuts locked against each
other to shorten bolt to proper thread length.
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
TE-CO Threaded Inserts
Part
Internal Tap Drill
No.
Thread
Size
•Automatic self-locking external thread
with use-activated adhesive
•Will not back out or vibrate loose
•Immediately on installation, micro encapsulated epoxy molecules begin to set,
and the newly installed insert can be fastened
to within minutes. Adhesive continues to
cure overnight until completely set
•Adhesive seals against liquids and gases
to pressures of 6,000 psi and bonds to
virtually all metals
42310
42311
42312
42313
42314
42315
42316
42317
42318
42319
42320
42321
42322
42323
42324
42325
42326
42327
42328
42329
42330
42331
Tap Size
External
Thread
Length
Coarse Thread/Fine Thread - Steel
4-40
6-32
8-32
10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
5/8-11
3/4-10
1-8
10/32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
5/32
#7
F
5/16
23/64
27/64
31/64
17/32
21/32
21/32
49/64
49/64
7/8
1-9/32
5/16
23/64
27/64
31/64
17/32
21/32
49/64
7/8
10/32
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-3/8-12
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
7/8-9
1-8
.250
.280
.290
.406
.437
.484
.515
.656
.656
.656
.687
1.125
.781
1.250
.406
.437
.484
.515
.656
.656
.687
.781
Extra Heavy Wall - Steel
42358
42359
42360
42361
42362
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
42332
42333
42334
42335
42336
42337
M6 x 1.0
M8 x 1.25
M10 x 1.50
M12 x 1.75
M14 x 2.0
M16 x 2.0
27/64
31/64
17/32
49/64
7/8
1/2-13
9/16-12
5/8-11
7/8-9
1-8
.484
.515
.656
.687
.781
Metric Internal/U.S. External - Steel
5/16
27/64
31/64
21/32
49/64
7/8
3/8-16
1/2-13
9/16-12
3/4-10
7/8-9
1-8
.406
.484
.515
.656
.656
.781
Metric Internal/Metric External - Steel
42338
42339
42340
42341
42342
42343
42344
42345
M3 x 0.5
M4 x 0.7
M5 x 0.8
M6 x 1.0
M8 x 1.25
M10 x 1.5
M12 x 1.75
M16 x 2.0
42346
42347
42348
42349
42350
42351
42352
42353
42354
42355
42356
42357
10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5.1mm
6.9mm
6.9mm
8.6mm
10.4mm
14.0mm
14.0mm
21.0mm
M6 x 1.0
M8 x 1.25
M8 x 1.25
M10 x 1.5
M12 x 1.75
M16 x 2.0
M16 x 2.0
M24 x 3.0
6.5mm
7.5mm
7.5mm
10.5mm
12.5mm
17.0mm
17.0mm
20.0mm
303 Stainless Steel, Passivated
5/16
23/64
27/64
31/64
17/32
21/32
5/16
23/64
27/64
31/64
17/32
21/32
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
.406
.437
.484
.515
.656
.656
.406
.437
.484
.515
.656
.656
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
65
TOOLING COMPONENTS
Keylocking Inserts: Installation & Removal Information
1. Drill out old threads with a standard drill. Countersink
with a standard (82-100
degree) countersink.
Note: Drill is oversized, see charts for proper dimensions.
2. Tap new threads with a
standad tap. See charts for proper size and depth.
If necessary, Thread Repair Inserts
can be removed without damage
to the parent material.
1. Drill out material between keys
and internal thread with standard drill to specified depth from chart.
2. Bend the keys inward and break off.
3. Remove the old insert using an E-Z out or similar tool.
4. Install replacement insert into the original tapped hole.
3. Screw in the insert until
slightly below surface
4. Drive keys down with several hammer taps on the proper installation tool.
Technical Notes
Material: Carbon Steel Inserts: C1215 or equivalent
Stainless Steel Inserts: 303
Keys: 302
Finish:
Carbon Steel Inserts: Parkerized
Stainless Steel Inserts: Passivated
Tolerances: +.010 inch or +.25 mm unless specified otherwise
Keys:
Inserts with an internal thread size of 5/16 or M7 and
larger are furnished with (4) locking keys
66
Dimensions are expressed in inches, except metric inserts are in millimeters
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
Keylocking Inserts
Thinwall
Part Number
Carbon Stainless
Steel
Steel
42431
42432
42433
42434
42435
42436
42437
42438
42439
42440
42441
Insert
Installation
Internal
External
Thread Thread (Mod) Length
Class 2B Class 2A
42453
42454
42455
---
42456
---
42457
42458
---
42459
---
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
1/2-13
1/2-20
5/16-18
5/16-18
3/8-16
3/8-16
7/16-14
7/16-14
1/2-13
1/2-13
9/16-12
5/8-11
5/8-11
Thread Tap
Removal
Installation
Tool
Part No.
Tap
Drill
Size
C’Sink
Dia*
Size
Class 2B
Min.
Depth
Drill
Size
Drill
Depth
42482
42482
42483
42483
42484
42484
42485
42485
42486
42487
42487
I
I
Q
Q
X
X
29/64
29/64
33/64
37/64
37/64
0.32
0.32
0.38
0.38
0.44
0.44
0.51
0.51
0.57
0.63
0.63
5/16-18
5/16-18
3/8-16
3/8-16
7/16-14
7/16-14
1/2-13
1/2-13
9/16-12
5/8-11
5/8-11
0.37
0.37
0.43
0.43
0.50
0.50
0.56
0.56
0.62
0.68
0.68
7/32
7/32
9/32
9/32
11/32
11/32
13/32
13/32
15/32
17/32
17/32
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
0.31
0.31
0.37
0.37
0.43
0.43
0.50
0.50
0.56
0.62
0.62
*Tolerance: +.010, -.000
Heavy Duty
Part Number
Carbon Stainless
Steel
Steel
42410
42411
42412
42413
42414
42415
42416
42417
42418
42419
42420
42421
42422
42423
42424
42425
42426
42427
42428
Insert
Installation
Internal
External
Thread Thread (Mod) Length
Class 2B Class 2A
42445
42446
42447
42448
---
42449
---
42450
42451
---
---
42452
---
---
---
---
---
---
---
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
1-8
5/16-18
3/8-16
3/8-16
7/16-14
7/16-14
1/2-13
1/2-13
9/16-12
9/16-12
5/8-11
5/8-11
3/4-16
3/4-16
7/8-14
7/8-14
1-1/8-12
1-1/8-12
1-1/4-12
1-3/8-12
Thread Tap
Removal
Installation
Tool
Part No.
Tap
Drill
Size
C’Sink
Dia*
Size
Class 2B
Min.
Depth
Drill
Size
Drill
Depth
42470
42471
42471
42472
42472
42473
42473
42474
42474
42475
42475
42476
42476
42478
42478
42479
42479
42480
42481
I
Q
Q
X
X
29/64
29/64
33/64
33/64
37/64
37/64
45/64
45/64
53/64
53/64
1-1/16
1-1/16
1-3/16
1-5/16
0.32
0.38
0.38
0.44
0.44
0.51
0.51
0.57
0.57
0.63
0.63
0.76
0.76
0.88
0.88
1.14
1.14
1.27
1.39
5/16-18
3/8-16
3/8-16
7/16-14
7/16-14
1/2-13
1/2-13
9/16-12
9/16-12
5/8-11
5/8-11
3/4-16
3/4-16
7/8-14
7/8-14
1-1/8-12
1-1/8-12
1-1/4-12
1-3/8-12
0.37
0.37
0.37
0.43
0.43
0.50
0.50
0.56
0.56
0.68
0.68
0.68
0.68
1.00
1.00
1.31
1.31
1.44
1.56
7/32
9/32
9/32
11/32
11/32
13/32
13/32
15/32
15/32
17/32
17/32
21/32
21/32
25/32
25/32
31/32
31/32
1-3/32
1-7/32
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
5/16
5/16
5/16
5/16
5/16
5/16
0.31
0.31
0.31
0.37
0.37
0.43
0.43
0.50
0.50
0.62
0.62
0.62
0.62
0.87
0.87
1.12
1.12
1.25
1.37
*Tolerance: +.010, -.000
Thinwall: Metric
Part No.
Carbon
Steel
Insert
Installation
Internal
External
Thread Thread (Mod) Length
Class 2B Class 6G
62411 M5 x 0.8
62412
M6 x 1.0
62413 M8 x 1.25
62414 M8 x 1.0 62415 M10 x 1.5
62416 M10 x 1.25
62417 M12 x 1.75
62418 M12 x 1.25
M8 x 1.25
M10 x 1.25
M12 x 1.25
M12 x 1.25
M14 x 1.5
M14 x 1.5
M16 x 1.5
M16 x 1.5
8.00
10.00
12.00
12.00
14.00
14.00
16.00
16.00
Thread Tap
Removal
Installation
Tool
Part No.
Tap
Drill
Size
C’Sink
Dia*
Size
Class 2B
Min.
Depth
Drill
Size
Drill
Depth
42488
42489
42490
42490
42491
42491
42492
42492
6.9
8.8
10.8
10.8
12.8
12.8
14.75
14.75
8.25
10.25
12.25
12.25
14.25
14.25
16.25
16.25
M8 x 1.25
M10 x 1.25
M12 x 1.25
M12 x 1.25
M14 x 1.5
M14 x 1.5
M16 x 1.5
M16 x 1.5
9.5
11.5
13.5
13.5
15.5
15.5
17.5
17.5
5.50
7.50
9.50
9.50
11.50
11.50
13.50
13.50
4.00
4.75
4.75
4.75
4.75
4.75
4.75
4.75
*Tolerance: +.010, -.000
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
67
TOOLING COMPONENTS
Inserts: Knife Thread Inserts for Wood
External knife threads provide superior holding
power in hard and soft woods, particle board and
all wood products.
Use wherever field assembly or disassembly could
lead to thread erosion or stripping. The long pilot
ensures straight driving into a drilled hole. Install
with screw driver, bolt and nut, tapping head or
driving tool.
•Material: Brass
Insert
Part No. Drive
Tool
Part No.
Internal
Thread
Length
Overall
Major Diameter
External Thread
42378
N/A
4-40
.375
42379
42309
6-32
.375
42380
42386
8-32
.375
42381
42387
10-24
.500
42382
42387
10-32
.500
42383
42388
1/4-20
.500
42302
42388
1/4-28
.500
42384
42389
5/16-18
.625
42303
42389
5/16-24
.625
42385
42399
3/8-16
.625
42304
42399
3/8-24
.625
.350
.350
.350
.453
.453
.453
.453
.600
.600
.600
.600
Hole
Size
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
Inserts: Hexdrive Knife Thread Inserts for Wood
An inexpensive insert for use in ready-toassemble furniture, drawer pulls and
wherever ease of assembly or avoidance of
thread stripping is desired. Install with hex drive
wrench or drive tool.
•Material: Die cast zinc alloy
Insert
Part No. Drive
Tool
Part No.
Description
Length
42363
42368
8-32 Flanged
11mm
42306
42368
10-24 Flanged
11mm
42364
42369
1/4-20 Flanged
13mm
42365
42369
1/4-20 Flanged
20mm
42307
42300 5/16-18 Flanged 13mm
42308
42301
3/8-16 Flanged
25mm
42366
42369
1/4-20 Flush
13mm
42367
42369
1/4-20 Flush
20mm
42305
42300
5/16-18 Flush
20mm
Hole
Size
6mm
4mm
9mm
9mm
8mm
10mm
9mm
9mm
8mm
Hex
Dimension
4mm
4mm
6mm
6mm
8mm
10mm
6mm
6mm
8mm
Note: 11mm approximately 7/16”; 13mm approximately 1/2”; 20mm approximately 3/4”
68
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
TOOLING COMPONENTS
5C Collet Stop Assembly
5C Adjustable Collet Stop
Part Number 35001
Part Number 35002
3/8-24 UNF-2A
thread
1.041-24
thread
•Assembly includes:
– Adjustable Collet Stop: Part Number 35002
– Extension Tube: Part Number 35004
– Stop Wrench: Part Number 35009
•For use with 5C collets
•Fully threaded adjustment screw
•Fits collet with internal threads
•Overall length = 4.12
•Black Oxide Finish
5C Collet Stop Extension Tube
5C Collet Stop Wrench
Part Number 35004
Part Number 35009
•Adds 3” length to the collet stop
•Conveniently locates long parts
•Two or more tubes can be coupled for
desired length
•Internal thread & external thread = 1.041-24
•Easily tightens or removes collet stops
•Saves time and prevents damage to
precision collets
•Wrench mates perfectly with collet
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]
69
TOOLING COMPONENTS
View our website at
www.te-co.com
Click part number for list price
and available CAD models
70
937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]