L i m i t l e s s .
I n g e n i o u s .
Quality management
certified according to
DIN EN ISO 9001:2000
by German TÜV-CERT
S t r o n g .
General construction approvals
Z-8.22-64, Z-8.22-64.1
Allround Scaffolding ®
Made of
galvanised steel or
corrosion-proof aluminium
Layher
®
More Possibilities. The Scaffolding System.
More possibilities. Unique connection technology.
Layher Allround Scaffolding.®
I n g e n i o u s .
S t r o n g .
L i m i t l e s s .
Positive connection from
the word go:
the wedge head is slid
over the perforated rosette . . .
. . . and immediately
secured against falling out by using the
wedge.
A blow with a hammer on
the wedge then transforms
the positive connection
into an unsurpassed forcetransmitting rigid joint.
The main use of the Layher Allround
scaffolding system is for demanding
scaffolding applications – where
conventional scaffolding technology
cannot be used optimally and
economically. With Layher Allround
scaffolding, you are making an investment in a perfected and complete
system with all the necessary approvals,
and hence in rapid, safe, profitable and
highly versatile scaffolding construction.
The unique combination of positive and
rigid connection in a fast and non-bolted
system permits a choice of automatically
right-angled, linear or angled connections with built-in safety. The original
Layher Allround scaffolding offers –
particularly in complex scaffolding con-
struction – an unmatched range of uses,
unbeatably fast assembly, and persuasive economic arguments, not least
thanks to a comprehensive range of
accessories – this means unrestricted
all-round versatility from one set of
parts.
Positive connection
from the word go – thanks to the idealfor-site wedge locking principle. This
means safe one-man assembly to whatever height is required. A blow with a
hammer transforms the positive connection into an unbeatably firm and secure
force-transmitting joint.
Force-transmitting joint
is the result of superior design: the end
of the wedge head precisely matches the
radius of the standard – so forces are
introduced centrally into the standard
over a wide area.
Rapid assembly
Up to 8 connections at various angles
can be made in one plane with the
statically ideal Allround connector. The
assembly of the system is selfexplanatory.
If required, you can insert tubular or
U-ledgers to accommodate the system
scaffolding decks: the stiffening effect of
the latter means that longitudinal
ledgers parallel to the deck (locked
against lift-off) are superfluous – a material and weight saving that brings
additional assembly and transportation
benefits.
More possibilities. With rapidly assembled safety.
Unbeatable Allround application . . .
. . . w i t h
m a x i m u m
e c o n o m i c
Layher Allround scaffolding
system made of aluminium:
It can take the strain, but it won’t strain
you.
It’s the same from both the ergonomic
and the business viewpoints: whenever
scaffolding has to be manhandled –
down manholes, through narrow engineering plants – and whenever physical
constraints prevent the use of steel or
whenever low weight is crucial – for
example at trade fairs, or for stages and
sets – the identically designed aluminium version has clear-cut advantages.
And it pays off, thanks to:
low transport weights,
reduced load on ground,
faster assembly.
e f f i c i e n c y.
More possibilities. The original.
The Layher Allround force connector makes it possible.
U n l i m i t e d
o p e r a t i n g
p o t e n t i a l .
For industry, chemical plants, power stations,
construction sites, aircraft hangars, shipyards,
theatres and arenas, at any site or facility,
Layher’s “original” does full justice to its
reputation as an all-rounder. Whether it’s a
working, protecting, facade or supporting
scaffolding unit; whether it’s indoors, rolling
or overhead, even for the trickiest floor layouts
and assembly situations, or for complex architectural features and for compliance with
stringent safety requirements – thanks to its
unique connection technology and unparalleled assembly speed, Layher Allround
scaffolding has become established on the
market as a synonym for modular scaffolding.
The Layher system advantages:
Ingenious connector technology
8 connections in one plane, automatic
right-angles and flexible angle selection,
self-locking during assembly, materialsaving.
Comprehensive range of parts
Unlimited use, unbelievable potential,
special and one-off solutions; can be
used in conjunction with other Layher
scaffolding and protective systems.
Precision
Time saved in assembly – safe handling;
officially approved.
We’re there for you. Wherever and whenever you need us.
Layher in Germany
Branches and delivery warehouses nationwide.
Layher International
Subsidiaries:
Argentina, Australia, Austria, Belgium, Bulgaria,
Chile, Colombia, France, Hungary, Italy, Lithuania,
The Netherlands, New Zealand, Norway, Poland,
Peru, Russia, Singapore, Spain, Sweden,
Switzerland, United Kingdom, USA.
Representatives:
Croatia, Czech Republic, Denmark, Estonia, Finland, Hong Kong,
Japan, Jordan, Kuwait, Latvija, Lebanon, Libya, Oman, Philippines,
Romania, Saudi-Arabia, Serbia, Slovakia, Slovenia, South Africa,
Ukraine, United Arab Emirates
and many other countries.
Wilhelm Layher GmbH & Co.KG
Scaffolding Grandstands Ladders
Post Box 40
74361 Gueglingen-Eibensbach
Germany
Phone +49 71 35 70-0
Fax
+49 71 35 70-372
E-mail [email protected]
www.layher.com
The Layher Product Range
Protective
Systems
Event Systems
SpeedyScaf®
Allround®
Scaffolding
Ladders
Rolling Towers
Accessories
More Possibilities
Ref. No. 8116.201 Edition 01.08.2008