Form PACB-002
GOVERNMENT OF PAKISTAN
MINISTRY OF DEFENCE
PAKISTAN AERONAUTICAL COMPLEX BOARD
KAMRA
INVITATION TO TENDER AND GENERAL INSTRUCTIONS TO TENDERER
(FOB)
Tender No PACB/721/260815022/0266/P-3
Directorate of Central Procurement
Pakistan Aeronautical Complex Board
Kamra Distt. Attock
Tel: 051-9099-2543, 2244
Fax: 0092 (57) 9317491
November, 2015
PAC & PPRA Websites
Dear Sir,
1.
I invite you to tender for supply of store details in the attached Schedule to
Tender (Form PACB -02A)
2.
CONDITION GOVERNING CONTRACTS.
The “Contract” made as a result of
this Tender Inquiry shall mean the agreement entered in to between the parties i.e. the
“Purchaser” and the “Seller” on PACB Contract Form (PACB – 03) in accordance with
the law of contract Act, 1872 and those contained in PAC purchase procedures and
other special conditions that may be added to given contract for the supply of PAC
stores specified therein.
3.
DELIVERY OF TENDER.
(a)
Technical Offer: It shall contain all relevant specifications alongwith
essential literature / brochure in a separate envelope and clearly marked
“Technical Offer without prices”, tender number and date of opening.
(b)
Commercial Offer: It shall indicate prices quoted in figures as well as in
words and clearly marked on face of a separate envelope “Commercial
Offer with prices”, tender number and date of opening.
(c)
Both the “Envelops” of Technical offers and Commercial should be
enclosed in one cover, properly sealed and bear the address of Directorate
of Central Procurement (DCP) PACB Kamra with tender number and
opening date.
(d)
Technical offer i.e. without prices will be opened on the date and time
mentioned at Annex “B” of tender. However time and date for opening of
Commercial offers of all those firms whose technical offers are accepted
will be intimated later. Offers which are not technically accepted will be
returned to the firms un-opened.
Page 1 of 36
4.
FORM PACB - 02A & PACB - 02B:
Form PACB - 02A & PACB - 02B
(Annexure D & E) duly filled-in are to be returned with the offer duly signed by the
authorized signatory person.
5.
SINGLE/MULTIPLE OFFERS: Only one offer can be made in relevant
currency for same item. Multiple rates, if quoted, will be rejected. Multiple quotation
against the tender will also be rejected.
6.
DATE & TIME FOR RECEIPT OF TENDER: The tender must reach DCP PAC
Kamra by the date and time specified in the Schedule To Tender (PACB – 02A
attached). Tenders received after the appointed time will, NOT be entertained. The
appointed time will, however fall on next working day in case of closed/forced holiday,
telegraphed / Faxed / Telexed bids will be rejected unless specifically asked for.
7.
DELIVERY PERIOD:
Stores are required within minimum possible delivery
period not later than 30-09-2016 or within 03 months after signing of the contract,
in the shortest time frame. Offers with minimum delivery period are likely to be preferred.
However delivery period is to be factual as no extension will be subsequently granted
except under unavoidable circumstances beyond control of SELLER or under Force
Majeure for which intimation with full justification / evidences is to be dispatched well in
advance for consideration.
8.
RIGHTS RESERVED:
PAC Board Kamra reserves the right to accept or
reject any offer. The reasons of rejection will be intimated to the unsuccessful bidders.
Moreover, past performance of the firms may also be considered.
9.
ADDITION AND DELETION OF STORE:
The purchaser has the right to
increase or decrease the quantity of any item and cancellation of the contract partially or
fully without any financial repercussion on either side without assigning any reason
within 30 days of signing the contract. Such information will be passed on to the
SUPPLIER /SELLER through the fastest means e.g. telephone, telegram or fax etc.
10.
VALIDITY OF QUOTATION:
The quotation be valid till 30 June, 2016.
11.
TECHNICAL LITERATURE, SPECIFICATIONS AND INTERCHANGEABILITY:
Offers are to be submitted in duplicate supported by brochures and technical
literature in original. Offers must conform to tender specifications. A certificate of
complete interchangeability must be endorsed on the quotation for all substitute or in-lieu
items, otherwise the same are likely to be rejected. A copy of relevant page of
publication must be attached to prove correctness of offered / interchangeable / in-lieu
item. Prices of master, substitute and in-lieu items must be quoted separately.
12.
DEVIATION FROM SPECIFICATIONS: Stores received at consignee, if found
not conforming to the contract specifications will be rejected and replacement in
accordance with contractual specifications against rejected stores would be provided to
consignee as per delivery schedule laid down in the contract. The replacement will be
provided without any additional cost. In case stores are rejected after delivery schedule
of the contract, replacement is to be provided at the earliest or by the date advised by
Directorate of Central Procurement PAC Board. Rejected store will be returned after
receipt of its replacement.
Page 2 of 36
13.
PACKING: Stores must be dispatched in standard trade packing unless
otherwise specified to protect them against any damage. Any loss/damage caused due
to poor packing will be recovered from the Supplier. In case items are shipped thro Sea,
packing shall be sea worthy.
14.
RESTRICTION OF EXPORT / IMPORT LICENSE: Offer subject to restriction of
Import/Export License will not be entertained.
15.
APPLICATION OF OFFICIAL SECRET ACT 1923:
All matters connected with
this inquiry and subsequent actions arising thereafter fall within the scope of the
Pakistan Official Secret Act 1923 which forbid providing contractual information to
un-authorized / un-concerned person / organization. It is therefore, requested to ensure
complete secrecy regarding documents and stores concerned with the inquiry to limit the
number of employees having accesses to this information.
16.
QUOTING OF PRICES:
(a)
(b)
(c)
(d)
(e)
(f)
17.
Prices are to be quoted as follows: -
FOB price of the stores (Line Item Wise).
Percentage of agent commission (on Ex-Factory price). Agent commission
is to be exclusive of quoted price. Principal must indicate if agent
commission is not applicable. If there is no indication of agent commission
in principal’s Performa invoice, agent commission will neither be given by
the principal nor by the Buyer.
The prices must be stated for each item separately both in figures and
words. Additional information if any must be linked with entries on the
Schedule to Tender (Form PACB – 02A)
Original quotation from the foreign manufacturer / supplier / principal must
be attached in support of the quoted price. Principal is to endorse following
certificate on the original quotation.
“Certified that stores offered are factory new and from latest production and
prices quoted are not more than the international market prices and also
not more than those being charged from other buyers “.
Shelf / installed life of each item is to be mentioned separately.
Certificate as per attached Annex “A” duly signed by the principal and
agent must be attached with quotation.
PROVISION OF OEM CERTIFICATE:
Certificate of OEM for certified vendors or Agency Agreement must be
attached with quotation.
18.
DISQUALIFICATION:
Offers are liable to be rejected if: - (Please Read
Carefully)
(a)
There is deviation from any instruction described in this invitation to tender.
(b)
Offers are found conditional or incomplete in any respect.
(c)
Multiple quotations against the tender.
(d)
Multiple rates are quoted against one item.
Page 3 of 36
(e)
Manufacturer relevant brochure is not attached (in case of equipment
or major assemblies of equipment).
(f)
Annexure “A”, Form PACB-02A (Annexure “D”) and PACB-02B
(Annexure “E”) duly filled – in and signed by the Tenderers are not received with
the offer.
(g)
Offer received later than appointed time and date.
(h)
Tender specification if not confirming to the offer. In case of equipment/
major assemblies manufacturer’s brochures shows specifications different
from those given in tender.
(j)
Offer subject to restriction of Export License.
(k)
Over writing /erasing in prices.
(l)
Change in prices by the supplier after opening of commercial offers unless
asked by Directorate of Central Procurement PAC Board.
(m)
Validity of offer is not quoted as required in IT or made subject to
confirmation letter.
(n)
Offers not accompanied with prescribed tender/ Challan fee of Rs. 100/-
(p)
Earnest money not provided.
(q)
Performa Invoice of Principal / Principal Invoice, in duplicate clearly
indicating whether prices quoted are inclusive of the agent commission, is not
enclosed.
(r)
Agency agreement of agent with Principal / OEM and link between
Principal and OEM is not provided.
(s)
The validity of agency agreement has expired.
(t)
Offer without certification of OEM.
(u)
Offer with Prior sale condition.
19.
PAYMENT: Payment of 50% may be allowed on dispatch of stores through
Letter of Credit and remaining 50% (negotiable) on issuance of Certificate Receipt
Voucher (CRVs) by Consignee. 10% Performance Bank Guarantee is to be submitted
within 30 days of opening of LC.
20.
SEQUENCE OF QUOTATION: Quotation must be prepared according to the
serial no sequence of Schedule to Tender (Form PACB-02A).
21.
WARRANTY / GUARANTEE OF STORE:
Warranty / guarantee for a period
of one year be applicable for stores commencing from acceptance of store at consignee
(if applicable).
22.
COUNTRY OF ORIGIN AND MODE OF SHIPMENT: Following details must be
provided in your offer / quotation and Performa invoice; Page 4 of 36
(a)
Country of origin, place of manufacture of store and beneficiary should be
mentioned.
(b)
Name of port connecting PIAC aircraft / PNSC ship where from the store
will be shipped. The firm may like to ensure the availability of PIA flight or PNSC
operation from the port of shipment before signing the contract.
(c)
Where PNSC or PIAC do not operate, the supplier would ship the stores
through Pakistan / Foreign flag Vessel / Airline on freight pre-paid basis with prior
approval of procuring agency and claim it subsequently. Insurance and freight
charges should not exceed 10% of FOB value of the stores.
23.
FAX QUOTATION: Fax / Email quotations will not be accepted except when
specifically called for under emergency / urgency, however, Fax / Email quotation, if
received will only be considered subject to condition that original Performa invoice for
each quotation is received within 7 days of Tender Inquiry opening or as advised by
procurement agency. In case original quotation is not received within specified time, the
offer will be excluded from the competition without any notice to quotee.
24.
L C CHARGES:
Payment will be made through irrevocable and nontransferable Letter of Credit. LC opening / advising and confirmation and additional
charges will be borne by the beneficiary / supplier as per prevailing Bank rates. LC
charges with in Pakistan will be borne by the purchaser. Charges outside Pakistan are to
borne by the seller. Any additional charges due to request of supplier will be borne by
the supplier.
25.
QUALITY INSPECTION: Items supplied are liable to be inspected by the quality
inspectors of to the respective factory of PAC before acceptance.
26.
SUBMISSION OF CERTIFICATE:
The certificate
Annexure “A” is to be submitted along with offer / quotation.
as
per
attached
27.
TENDER OPENING:
Representative of Foreign Liaison Office will not be
allowed to attend Tender Opening unless it is registered with Pakistan Aeronautical
Complex Kamra. No unauthorized person will be allowed to attend the tender opening.
28.
EARNEST MONEY:
The Earnest money @ 5% (not exceeding 0.150 M)
will be deposited by all firms irrespective of registration status in favour of
CMA (DP) in the form of Bank Draft / Pay Order at the time of opening tenders (with
technical quotation), separate envelope. Earnest money will remain deposited till the
finalization of commercial quotes. It will be returned to unsuccessful bidders immediately
after finalization of commercial quotes and on receipt of Performance Bank Guarantee /
Bond acceptance Certificate from CMA RWP / DBA PAC Board Kamra, to the contractor
signing the contract. Quotations once submitted cannot be withdrawn (Partially / Fully)
during validity of the quotation. Firms not complying to the said instructions would be
liable for disciplinary action beside forfeiture of the earnest money.
(Note: - Earnest money must be provided in shape of Bank Draft / CDR and Pay
Order otherwise your quotation will be rejected.)
29.
END USER CERTIFICATE (EUC):
mentioned in the quotation.
EUC if required at any stage may be
Page 5 of 36
30.
CHECKING OF STORE: Store will be checked at consignee in the presence of
representative of Supplier if he arrives within 15 days after initiation of letter.
31.
WITHDRAWAL OF OFFER:
If the firm withdraws its offer or backs out from
providing items won by the firm within validity period at any stage of contract finalization,
the Competent Authority may place such firm under Embargo for a period of six months,
which may extend upto one year / forfeit the earnest money.
32.
TREASURY CHALLAN: Offer must be accompanied by Challan Form No.
F-32A of Rs, 100/- obtained from State Bank of Pakistan/ Govt treasury under
“Departmental Receipt Major Head 1221000” CMA (ISO’s) Rawalpindi on behalf of
“Director Central Procurement PAC Board Kamra“. Only one offer can be made for same
item on one Challan. Multiple offer / rates, if quoted will be rejected.
33.
PHOTO COPIES OF DOCUMENTS:
document must be provided with offer: (a)
(b)
(c)
Following
information’s
/
copies
of
Photo copies of valid registration and indexation of foreign principal with
PACB/DGDP applicable to the store / equipment offered is to be provided
with the quotation.
A copy of letter showing firm’s financial capability.
Photo copies of General Index number (GID) and National Tax number
(N T N).
34.
PRIOR INTIMATION REGARDING SUBMISSION OF QUOTATION: To avoid
misplacement of the quotations, all quottee firms are to intimate this office regarding
dispatch of their quotation giving details of the courier through telephone / fax, so that
courier service may be tracked to ensure your participation in the competition.
Yours sincerely,
(S ALI RAZA)
Flight Lieutenant
Asstt Dir Central Proc
PAC Board Kamra
Tel: 051-9099-2543
Enclosure: (i)
(iii)
(v)
(vii)
Certificate (Annex “A”)
Schedule of Stores (Annex “C”)
Form (PACB – 02B) (Annex “E”)
Details of Bank Guarantee (Annex “G)
(ii)
(iv)
(vi)
Page 6 of 36
Questionnaire (Annex “B”)
Form (PACB – 02A) (Annex “D”)
Form (PACB – 02C) (Annex “F”)
Annexure “A”
CERTIFICATE
TENDER/CONTRACT NoPACB/721/260815022/0266/P-3
It is certified that no person, firm, cooperation, subsidiary or entity in Pakistan or
elsewhere shall directly receive any rebate, bonus commission, gift or favour in cash or
kind other than commission allowed to M/S ( FULL NAME TITLE OF THE COMPANY
WITH ADDRESS) against contract No
dated
In case if it is discovered that contents of this certificate have been infringed / violated
by the supplier the purchaser will have the right to cancel the contract and / or impose a
penalty equal to 25% of the contract value.
AGENT-.
PRINCIPAL
Seal & Signature
Seal & Signature
COUNTERSIGNATURE
Director Procurement
Seal & Signature
Page 7 of 36
Annexure “B”
QUESTIONNAIRE TO BE FILLED IN BY TENDERER
1.
Whether stores offered confirmed to the specification to
Yes / No
this effect has been made in the quotation given in
Form PACB - 02
2.
Whether deviation from the demanded specification
Yes / No
is attached with Form PACB – 02A.
3.
Whether quotation has been submitted in duplicate
Yes / No
and prices have been shown on original copy only.
4.
Whether the prices are exclusive of taxes/duties if so
Yes / No
whether taxes/duties have been shown separately.
5.
Whether Form PACB – 02A and PACB – 02B duly
Yes / No
filled in and signed by the Tenderer have been
returned in herewith.
6.
Whether original invoice Performa from principal has
Yes / No
been enclosed herewith.
7.
Whether Treasury Challan amounting to Rs, 100/- has been
Yes / No
enclosed herewith.
8.
Whether copy of valid registration and indexation of
Yes / No
principal have been enclosed herewith.
9.
Whether financial capability and financial load of
Yes / No
contracts outstanding against your firm and of your tender
accepted by Organization under DGDP have been given.
10.
Whether store is to be checked at consignee presence
Yes / No
of your representative.
11.
Specimen of “End user certificate” attached with quotation (If applicable).
12.
Earliest date by which delivery can be affected
.
13.
In which appointment / capacity are you signing the tender documents
.
14.
It is confirmed that no taxes / duties and dues payable to Government are
outstanding at the part of vendor / firm.
Yes / No
(Signature of Tenderer)
(Name in Block Letters)
(Appointment in the Firm)
Dated: -
Page 8 of 36
Annexure “C”
SCHEDULE OF STORES
Tender Inquiry No: - PACB/721/260815022/0266/P-3
TENDER SUBMISSION TIME: -
Before 1030 Hrs on opening date
TIME & DATE OF OPENING
1100 Hrs on 09-11-2015
EXTENDED UP TO
1100 Hrs on 19-11-2015
PROC OF AIRCRAFT SPARES
(L/items = 1189)
AS PER FOLLOWING DETAILS
S No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Part No
3581
7012
7014
8107
215006
730015
893271
0-6/LB-6
1.5X10GB91
1.5X16GB91
1.5X16GB91-1CR18NI9TI
1.5X20/44200A
1.5X25GB91
114T-00-13
114T-00-36
114T-03-02
1300UJB(M)1-75
13Y38-16
14Y4-120
14Y6-100
16-00-03
16-3/KH-1
1C8-370-007
1C8-370-103
1C8-370-104
1C8-370-112
1CR18NI9TIF0.8
1D105-13-2.2-P
1D105-16-2-P
1D105-24.5-2.5-P
1D105-24-3-P
1D105-26-2.6-P
1D105-36.5-3.5-P
Noun
SPRING
GREASE
GREASE
BEARING"D"CLASS
SEAL RING ASSY
MICRO SWITCH ASSY
SPACER
LOCKING PIN
SPLIT PIN
SPLIT PIN
SPLIT PIN
SPLIT PIN
SPLIT PIN
RUBBER RING
RUBBER PAD
RUBBER PAD
BEARING
RUBBER HOSE
RUBBER HOSE
RUBBER HOSE
GASKET
GASKET
GASKET
WASHER
WASHER
SEALING RING
SAFETY WIRE
RUBBER RING
SEAL RING
SEAL RING
RUBBER RING
RUBBER RING
RUBBER RING
Page 9 of 36
U/I
EA
KG
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
MTR
MTR
EA
EA
EA
EA
EA
EA
EA
MTR
EA
EA
EA
EA
EA
EA
Qty
Req
50.00
1.00
5.00
20.00
30.00
30.00
50.00
2.00
600.00
500.00
2.00
50.00
220.00
5.00
25.00
15.00
15.00
2.00
50.00
15.00
30.00
30.00
3.00
80.00
40.00
30.00
10.00
60.00
90.00
15.00
80.00
30.00
30.00
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
1D105-5-1.5-P
1D105-5-1.6-P
1D105-6.8-1.6-P
1D105-8-2-P
1D106-32.2-26
1X12GB91
2#
2.5X16GB91
2.5X16GB91.10-ZND
2.5X20GB91
2.5X35GB91
2.5X45GB91
201-7811-04
211C-ZT-03WT
211-Z23-57WT
26-26
2C025021
2-S8X1600X1450
2X15GB91
2X20GB91
2X35GB91-1CR18NI9TI
2X36GB91-86
31-20-1020
3-2/GG3-8
34-110
34-62
34-66
34-72
34A-91
34C-89
365-010
3DT-107
3DT-111
3X35GB91-1CR18NI9TI
3X45GB91-ZND
3X60GB91
4124-1
452-212
49001=0.4
4D3006J3-14X2
54-00004
586-JXC103-5/HB2-70-83
5T4-10
5T6-10
6A1-152-2.5X34
6A3-75-1.2X11X45
6A4-18-16
6A4-18-22
6A4-186-19
6A4-187-13.6
6A4-187-27.6
6A4-187-74
6A4-20-16X25X2.5
RUBBER RING
SEAL RING
RUBBER RING
RUBBER RING
GASKET
SPLIT PIN
POLISHING COMPOUND
SPLIT PIN
SPL IT COTTER
SPLIT PIN
SPLIT PIN
SPLIT PIN
FILTERING PAPER
RUBBER HOSE
PIN
WASHER
RUBBER SEAL
PLEXI GLASS
SPILT PIN
SPLIT PIN
SPLIT PIN
Split Pin
OXYGEN HOSE
GASKET
FILTER ASSY
SEAL RING
SEAL RING
SEAL RING
SEALING RING
LEATHER CUP
RUBBER CUP
R UBBER GASKET
R. GASKET
SPLIT PIN
CUTTER PIN
SPLIT PIN
INSTRUMENT OIL
RUBBER RING
SEAL PUTTY CLOTH
SEAL RING
RUBBER WASHER
RUBBER SECTION MEMBER
HOSE
RUBBER PIPE
SPLIT PIN
SPRING
SEALING RING
SEALING RING
RETAINING RING
RUBBER RING
RUBBER RING
SEALING RING
RUBBER RING
Page 10 of 36
EA
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
MTR
EA
EA
MTR
MTR
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
200.00
130.00
80.00
20.00
70.00
100.00
15.00
40.00
50.00
20.00
150.00
50.00
20.00
15.00
40.00
15.00
15.00
90.00
20.00
500.00
60.00
30.00
15.00
8.00
15.00
15.00
60.00
10.00
15.00
5.00
15.00
4.00
4.00
20.00
25.00
100.00
1.00
15.00
30.00
50.00
20.00
50.00
100.00
15.00
20.00
2.00
35.00
2.00
100.00
75.00
50.00
2.00
2.00
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
6A4-202-38X45X2
6A4-203-10X18X3
6A4-203-15X25X3
6A4-20J2-10X18X2.5
6A4-25-10X18X3-E
6A4-26-5X2E
6A4-27E-75X5
6A4-303-1
6A4-303-12
6A4-303-13
6A4-303-14
6A4-303-20
6A4-303-24
6A4-303-26
6A4-303-28
6A4-303-31
6A4-303-33
6A4-303-36
6A4-303-37
6A4-303-6
6A4-303-8
6A4-304-12
6A4-304-13
6A4-304-14
6A4-304-15
6A4-304-17
6A4-304-5
6A4-304-7
6A4-304J3-14
6A4-305-1
6A4-305-2
6A4-41J1-18
6A4-41J1-19
6A4-41J3-22
6A4-7-17.6
6A4-7-23.6
6A4-7-49.4
6A4-91-34X40.2
6A6-36J-5
6A6-36J-7
6MA=0.3
730015A
7X7-2.15YB261-73
80-450-1
8SH-037-015
A17-2.6X6
A21-12X2J0
A21-16X2J1
A21-3.8X1.7J6H
A21-32X3.1J6-H
A21-5.1X5J1
A21-8X1.8J6
A21-8X2J1
SEAL RING
WASHER
SEALING RING
SEALING RING
RUBBER RING
R RING
RING
STOP RING
RING
RETAINING RING
RETAINING RING
STOP RING
RETAINING RING
RETAINING RING
RETAINING RING
RETAINING RING
RETAINING RING
RING
STOP RING
STOP RING
RING
SEAL RING
SEALING RING
R RING
SEALING RING
SEALING RING
SEAL RING
RUBBER RING
SEALING WASHER
SEAL RING
SEALING RING
SEAL RING
SEAL RING
SEAL RING
RUBBER RING
SEALING RING
SEALING RING
STOP RING
FITTER PLATE
FITTER PLATE
BUTYL FILM
SWITCH
STEEL CABLE
POLYSTER FIBER TAPE
SEALING WASHER
RIVET
SEAL RING
SEAL RING
SEAL RING
SEAL RING
RING
SEAL RING
SEALING RING
Page 11 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
EA
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
2.00
50.00
2.00
100.00
25.00
30.00
80.00
30.00
30.00
30.00
80.00
20.00
70.00
30.00
25.00
30.00
15.00
40.00
30.00
4.00
20.00
5.00
2.00
40.00
2.00
2.00
20.00
5.00
15.00
4.00
25.00
30.00
200.00
25.00
30.00
25.00
15.00
4.00
2.00
2.00
1.00
5.00
1.00
30.00
10.00
50.00
30.00
30.00
30.00
160.00
15.00
60.00
30.00
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
A23-17X10.8J6
A23-23X16J7
A23-24X18.2J1
A31-110X95X5
A41-3.5X23X25.7-III150-0
B01-6
BST1-011
BST1-104
BST1-112
BST1-113
BYQ250-00-02
BYQ250-00-03
C1.08.00
CA2-50V-5UF+50%-20%
CT-27
CTQ22-104
D2.5-1CR18NI9TI
DLY320-1MM
EF180504JTR1
F-23
FA3-20-2.6J6
FA3-25.5-1.2J1
FA3-3.8-1.7J7H
FA3-32-2.6J6
FA3-4.4-1.8J7H
FA3-8.5-1.7J7
FJ26-10
FS2A-106W
G1-01-04
GB6170-86-M3
HB1-134-5X14
HB1-207G-M2X26
HB1-510-27X33X2.5
HB2-6-8X6
HB3-54-A1.2X10X38
HB3-54-B1.5X9X57I
HB3-55-A1.2X9X35II230
HB4-121-3
HB4-56J1-57
HB4-56J6-22H
HB4-57J3-122
HB4-57J9-22
HB5-7-4
HB6-21-1/1
HD-3-1(G)
HD-3-1(R)
HW-912
HX1B
J5-4901-55
J6-5500-17
J6-7802-42
J7-0203-8
J7-0209-30H
SEAL RING
SEALING
SEAL RING
RING
SPRING
VARNISH
VALVE
WASHER
SAFETY CAPSULE
SMALL SUPPORT RING
POSTING PAPER
WASHER
CABLE SLEEVE
CAPACTIOR
ARMATURE
RUBBER GASKET
WIRE
OIL RESIS ASBESTOS SHEET
AVIATION BEARING
ANTI RUST OIL
RUBBER SEAL
SEAL
SEAL
SEALING RING
SEAL RING
SEAL
BULB
ELECT WIRE
RUBBER RING
NUT
BOLT
SCREW
GASKET
RUBBER RING
SPRING
SPRING
SPRING
GASKET
SEAL RING
SEALING RING
SEALING RUBBER RING
RING
PLASTIC COLLAR
DAMPER SPACER
TIP LIGHT GLASS
LAMP DOME
RED GUARD
VALVE CORE
RUBBER CUP
ADOPTER WASHER
FILTER
STOP WASHER
steel cable
Page 12 of 36
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
KG
EA
LTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
2.00
25.00
20.00
15.00
10.00
30.00
2.00
10.00
15.00
15.00
2.00
20.00
15.00
30.00
20.00
15.00
10.00
2.00
20.00
4.00
25.00
20.00
20.00
15.00
5.00
60.00
25.00
50.00
2.00
30.00
130.00
8.00
15.00
4.00
8.00
8.00
8.00
30.00
40.00
150.00
35.00
30.00
4.00
100.00
5.00
2.00
30.00
30.00
30.00
30.00
150.00
30.00
15.00
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
J7-0604-1650
J7-0604-56
J7-3900-130
J7-4003-58
J7-4806-3
J7-5101-3
J7-5104-1
J7-5503-122/2
J7-5503-175
J7-5505-490
J7-5505-590
J7-5511-243
J7-5512-560H
J7-6100-104
J7-6100-2090
J7-6103-103
J7-6103-401
J7-6110-63
J7-7202-3430
J7-7600-7
J7-7701-64
J7-7810-250
J7I-3900-120A
J7I-5502-2002/1
J7I-5502-2012
J7I-7701-20
J7II-0200-41A
J7II-0301-910-167H
J7II-0602-21/2
J7II-5102-2
J7II-5603-33
J7II-5606-2
J7II-6115-1304
J7II-6115-1306
J7II-7101-155
J7II-7600-1011
J7L-0226-0/A-6
J7L-0231-31
J7L-0601-23
J7L-0602-1010-2
J7L-0602-1502/1
J7L-0602-1511
J7L-0602-2002/2
J7L-0602-2004
J7L-0602-2010/2
J7L-0603-202
J7L-0603-4
J7L-0604-170/1
J7L-0604-170/2
J7L-0605-107
J7L-0605-454
J7L-4100-11/2
J7L-4100-214
ACTUATING CYLINDER
DIAPHRAGM
DISK
RING
EYE BOLT
SAFETY WASHER
WASHER
SEAL RING
FELT RING
SANDWICH
VALVE
RUBBER RING
HOSE
GASKET
DIAPHRAGM
BACKING PLATE
SEALING RING
WASHER
SLEEVE PIPE
GASKET
RUBBER BOLT
FLEXIBLE HOSE
SMALL SHAFT WITH BEARING
SEAL RING
SEAL RING
RUBBER SLEEVE
SECTION MEMBER
HEAT PROOF PAD
RUBBER BUSH
STOP RING
SHAFT
LOCK HOOK
CLAMP
CLAMP
PIPE
WASHER
RUBBER SECTION
WASHER
RUBBER SECTION MEM
POLYVINYAL CHOLORIDE SLEEVE
BUSH
CONVEX HEAD MEMBER
RUBBER SECTION
PLUG
THIMBLE
LOCK WASHER
SEAL RING
CANOPY SEAL
CANOPY SEAL
DIAPHRAGM
SCREW
RUBBER RING
STOP RING
Page 13 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
20.00
40.00
15.00
30.00
15.00
4.00
15.00
20.00
4.00
15.00
15.00
30.00
20.00
2.00
30.00
5.00
15.00
25.00
2.00
20.00
15.00
5.00
30.00
15.00
15.00
30.00
2.00
2.00
110.00
2.00
5.00
5.00
2.00
2.00
15.00
4.00
2.00
5.00
4.00
2.00
15.00
1.00
1.00
60.00
2.00
5.00
30.00
5.00
5.00
70.00
90.00
110.00
50.00
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
J7L-4100-253/1
J7L-4100-253/2
J7L-5101-2001
J7L-5101-231/2H
J7L-5505-7103
J7L-5508-351
J7L-5508-354
J7L-6100-6010
J7L-6107-4
J7L-6107-5
J7L-6110-6117
J7L-6500-4810
J7L-6501-7008
J7L-7103-833
J7L-7210-630-2
J7L-7600-303-1
J7L-7600-320
J7L-7600-685A
J7L-7600-686
J7L-7702-12
J7L-7702-320
J7LB-5311-212
J7LB-5505-5012
J7LP-0241-0-17
J7LP-0241-0-27
J7LP-0602-2002
J7LP-6102-7003
J7LP-6103-8004
J7LP-6500-2211
J7LP-7103-863
J7LP-7103-868
J7LP-7600-3001
J7LP-8400-450-1
JG7-5512-85
K6.00.03A
K6-02-04
KJY-19-3000
KJY8A-00-4
LQ5A-31-0
LS115B-220
LS115B-232
LS115B-240
LS115B-250
LS117-233-1
LS117-234-1
LS16B-15
LS16PH-40
LS16PH-60
LS16PH-62
M2.5X3GB71-76
M2.5X4GB71-76
ND-73
Q/11D-01-18-22
STOP RING
STOP RING
RUBBER RING
BRAKING CABLE
SHIELD RING
STOP RING
STOP RING
RUBBER WASHER
GASKET
CLAMP
WASHER
SLEEVE
STOPPER
COVER
GLASS
RUBBER WASHER
PIPE
SPRING
SEAL RING
WASHER
HOSE
PLACARD
PLACARD
PRESS PLATE
RUBBER SECTION
RUBBER SECTION
RUBBER WASHER
RUBBER RING
WASHER
RUBBER WASHER
RUBBER WASHER
GASKET
axle
BEND UNION
SEAL PAD
SEALING RING
VALVE
DIAPHRAGM
OIL CORE
ROTOR DISK
SEGMENT
STATOR DISK ASSY
PRESSURE DISK ASSY
SMALL SHAFT
BUSHING
SEAL RING
ROTORABLE DISK
STATIC DISK
BRAKE BLOCK
SCREW
SCREW
SURFACE LTEALING AGENT
WASHER
Page 14 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
40.00
120.00
2.00
2.00
30.00
40.00
15.00
15.00
15.00
15.00
4.00
5.00
5.00
1.00
1.00
2.00
15.00
20.00
20.00
5.00
25.00
20.00
15.00
2.00
2.00
15.00
15.00
2.00
15.00
9.00
2.00
2.00
10.00
15.00
15.00
40.00
5.00
30.00
30.00
60.00
100.00
20.00
15.00
500.00
500.00
30.00
80.00
80.00
100.00
30.00
15.00
1.00
25.00
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
Q/11D-01-20-24
Q/11D-06-5.8-1.8
Q/11D-12-20.5-26-1.5
Q/21D18-108X2-P
Q/21D18-5X1.5-P
Q/3A4-72LB6
Q/3A4-92-1
Q/3A4-94-1
Q/3A4-94-4
Q/3D149-42.3X2.5-A
Q/3D149-59.5X2.5-A
Q/3D150-20X24X0.8
QDF10-013
QMO-14-J1S
QMO-16-J1S
QMO-1-J1S
QMO-37-J11
QMO-63-J1S
QMO-69-J11
QS10A-06
QS11-60
QS5-02
QS5-10
QS6-07WT
QS6A-22200
QXF12A-100
QXF23-10
QXF32-004
QXF32-104
SV16-0.5X30
T1.02.02
T1.10.00
T1.17.00
T1.24.00
T1.44.00
T2M(T4M)5X1
TE-221
WWK-1B
XM-28-I
XY-401
YB-3
YJ1-129
YJ1-136
YL5G-100
YL7-003
YL7-004
YL7A-100
YXF10-002
YXF23-20
YXF60-0005
YY4-05
YYF31-0006
ZL-44561A
WASHER
stop ring
stop ring
SEALING RING
SEALING RING
SLEEVE
PLASTIC RING
SEALING RING
SEALING RING
seal ring
SEALING RING
WASHER
VALVE
SEAL RING
SEAL RING
SEAL RING
SEAL RING
SEAL RING
SEAL RING
WASHER
ARMATURE
DIAPHRAGM
VALVE
WIRE
VALVE
PISTONING
VALVE
GUIDE SLEEVE
CONE
INSULATING TAPE
GASKET
DIAPHRAGM ASSY
VALVE
VALVE ASSY
DIAPHRAGM
COPPER PIPE
GREASE
SWITCH
SEALING COMPOUND
GLUE
AREAL ORGANIC GLASS
PAD
PAD
FILTER ELEMENT
SEAL RING
SEAL RING
FILTER ELEMENT
WASHER
SELF CLOSING VALVE
SPECIAL WASHER
STOP WASHER
GASKET
RUBBER CUP
Page 15 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
KG
KG
EA
KG
KG
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
10.00
15.00
15.00
2.00
50.00
15.00
50.00
80.00
30.00
25.00
15.00
15.00
5.00
15.00
15.00
50.00
25.00
15.00
30.00
5.00
10.00
15.00
10.00
15.00
4.00
15.00
35.00
20.00
15.00
2.00
15.00
15.00
15.00
15.00
15.00
50.00
2.00
100.00
10.00
2.00
200.00
5.00
4.00
35.00
15.00
20.00
40.00
15.00
15.00
15.00
60.00
8.00
30.00
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
ZL-45004
325
944
1018
1200
1428
3160
4613
5905
7335
11844
14159
43003
043056
048502
048505
048514
058032
116109
187045
196049
282008
324000
325052
481866
540602
891281
900803
971067
981065
3124530
02/LB-6
05-210-20
10GB859-66
11182/A
114T00-24
114T01-00
114T04-05
114T04-06
114T04-09
114T12-00
114T19-00
114T-21-00
129T-30-02
13/32"IIBGB308-77
165-171
17.362.98
17.591.97
1A1-250-6X26
1A2-56
1C5-242-002
1C5-242-005
1C8-176-006
LOCKING WASHER
CHAIN
CAP
BEARING
BEARING
NIPPLE
SBR BLACK
SOCKET, TRANSISTOR MTG, TO-66
PLUG
SHROUD
NIPPLE
BRAKET
OSCILLATOR
TORODIAL
TRANSISTOR (NPN)
TRANSISTOR (NPN)
TRANSISTER
PCB
SUB ASSY CIRCUITE BOARD
LINK ROD ASSY
CAM
GEAR
DIODE (ORANGE COLOUR)
RUBBER RING
WASHER
SI STICK KIT C 689879
WASHER
BEARING
BEARING
BEARING
LOCKING PLATE
VANE WHEEL
INSERT
SPRING WASHER
ELBOW
SCREW
GLASS ASSY
SPRING
SPACER
OUTER CASE
ROTOR WITH SLEEVE
BRUSH PLATE ASSY
CABLE ASSY
DIAL
STEEL BALL
BASE PLATE ASSY
BIMETAL SPIRAL
BRUSH ASSY
HRH SCREW
LATCH
3 PIN RECEPTACLE
FOUR PIN SEALING
NIPPLE
Page 16 of 36
EA
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
16.00
5.00
5.00
40.00
15.00
60.00
1.00
20.00
10.00
20.00
3.00
20.00
1.00
2.00
5.00
50.00
7.00
3.00
2.00
2.00
1.00
1.00
1.00
4.00
4.00
4.00
2.00
2.00
15.00
20.00
20.00
1.00
2.00
2.00
2.00
2.00
2.00
3.00
3.00
1.00
5.00
1.00
15.00
2.00
8.00
10.00
1.00
1.00
2.00
4.00
1.00
3.00
2.00
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
1C8-940-001
1CR18NI9TI-0.5MM
1E6069007
1E8370009
1HB3-25-6.5
2.5X25GB91
2.5X8GB867LY10
201-7810-21
201-7811-00
202-007
202F253-71
20T0500
20T0600
20T0700
211-Z15
214-1000-03
214-1000-04
216-1100-03
218-1000-01
218-ZT-003
26-29
26T-03-00
2C6-022-026
2C6-901-036
2CX24BZF19M1J1
2CX24BZK19G1J1
2CX30LZK32M1J1
2CX30LZK32M1J1Z
2GB859-65MN
309F-625
309F-B1491
309F-B780
309F-Z331
34-40
34-83
34M-130
39.431.11
3DT-010
3GAX8GB119-66
3GB848-10
44M-46-1
44M-46-2
4C13.18D3
4DIV
4E6.563.004
4E8-285-035
4E8-315-020
4E8-957-034
4E8-959-002
4GB859-65MN
4GB93QSI3-1
5/16"DIIIGB308-64
5/32"IIBGB308-77
SPL NUT
STEEL SHEET
PCB
SEALING RING
CLAMP
SPLIT PIN
HRH RIVET
SCREW
GAS FILTER
PAD ASSY
BOOT
MOVABLE ASSY
CASING
DIVIATION CORRECTOR
GLASS FITTING
SPRING
SPRING CAP
ORANGE GLASS PANEL
GLASS PLATE
OUTER SLEEVE
WASHER
DEV. COMPENSIATOR
CHASSIS
CASE
PLUG
PLUG
PLUG
PLUG
SPRING WASHER
HANDLE SCREW
SECOND MEASURING HAND
SECOND HAND
GEAR ASSY
OIL DISTRIBUTOR VALVE
DRIVING ROD
SHAFT WITH BEARING
ROTOR
BELLOW ASSY
PIN
WASHER
OUTLET JOURNAL
INLET JOURNAL
WASHER
STEEL BALL
LAMP HOLDER
SPRING PLATE
COVER
GASKET
GASKET
SPRING WASHER
SPRING WASHER
STEEL BALL
STEEL BALL
Page 17 of 36
EA
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
2.00
15.00
6.00
2.00
30.00
434.00
40.00
8.00
5.00
10.00
25.00
2.00
10.00
4.00
3.00
10.00
10.00
1.00
2.00
2.00
9.00
1.00
1.00
4.00
1.00
3.00
1.00
3.00
50.00
6.00
2.00
5.00
5.00
5.00
6.00
10.00
1.00
2.00
4.00
6.00
2.00
2.00
4.00
50.00
50.00
15.00
20.00
50.00
20.00
4500.00
15.00
5.00
3.00
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
54-00001
54-00009
54-12300
54-12400
542B
5860-1.0MM
591-59
591-62
591-Z14
591-Z22
5C10-22-42
5C10-26-56
5C12-13-09
5C12-14-17
5SH.300.008
5SH.310.032
5SH-058-039
601PE.01
602GB-199-24
602GB-205-08
602GB-205-24
615253-019
6A1-100-M6
6A1-103-M6
6A1-107-M6
6A1-115-6X14
6A1-143-5X14X10
6A1-178-5X36X8
6A1-315LP-10
6A1-33-M4
6A1-33-M5
6A1-58-M6
6A4-16-6
6A4-191-5
6A4-21-16X27
6A4-21-25X39
6A4-21-4X12X17
6A4-220-2
6A4-222-4
6A4-226-10
6A4-227-8
6A4-302-12X14
6A4-302-16X18
6A4-302-30X33
6A4-302-32X34
6A4-302-4X6
6A4-302-8X10
6A4-306-3
6A4-311FA-13
6A4-7J1-11.6
6A4-7J1-9.6
6A6-10-B
6A6-13
WASHER
THREAD PLUG
SOFT WIRE
DAMPER
AMPLIFIER
AERO RUBBER PLATE
GLASS
WASHER
NEEDLE ASSY
RUBBER PIPE ASSY
SCREW
SCREW
COUNTERSUNK HEAD SCREW
SCREW
CASING ASSEMBLY
CASING ASSY
BASE ASSY
CAPACITOR, 0.01µF±10%,50 VDCW
WIRE PRESS FIXTURE
BUSH
BUSHING
BUTTON
NUT
NUT
SELF LOCKING NUT
BOLT
BOLT
BOLT
CONNECTOR
NUT
NUT
NUT
nipple
THREE WAY PIPE CONNECT
CONNECTOR
NOZZLE
NOZZLE
NIPPLE
FLAT NIPPLE
PLUG
PLUG
NIPPLE
NIPPLE
NIPPLE
NIPPLE
NIPPLE
NIPPLE
NIPPLE
STRAIGHT PIPE CONNECTOR
RUBBER SEAL
RUBBER SEAL
BUTTON PROTECTOR
WASHER
Page 18 of 36
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
1.00
1.00
30.00
10.00
4.00
2.00
8.00
4.00
3.00
6.00
15.00
6.00
1.00
1.00
1.00
1.00
1.00
10.00
3.00
2.00
2.00
1.00
10.00
8.00
20.00
15.00
2.00
3.00
2.00
15.00
5.00
8.00
2.00
5.00
8.00
8.00
4.00
5.00
600.00
5.00
1.00
20.00
8.00
2.00
2.00
300.00
200.00
4.00
4.00
2.00
9.00
8.00
8.00
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
6A6-141-4X200
6A6-40-7(4D)
6A6-42-24
6A6-42-31
6A6-52-7
6A6-52-8
6A6-54-1
6A6-54-2
6A6-54-7
6A6-55-3
6E6.133.026
6E6-472-003
6E8.476.009
6E8-142-049
6E8-282-044
7105MD9CB
7107MD9CB
721-081
7D17H-J8-305-1.7
7PN-100-01
7PW-100-17
7PW-100-18
8629169A
871-01-00
871-04-00
871-06-02
871-07-00
871-07-00/1
871-07-01
8GB859-65MN-CDD
8SH.370.035
8SH-022-005
8SH-301-007
941/7
A02-1/LS-16PH
A41-1X9X12-II
AF-200-0.1MM
AF-250
AF-250-0.35
AFP-250-0.35
AK1-2
AM2GB52-20
AN-2A
AZK-1
B-107
B2LKJ5-731-038
B801-62
B-GP.02±20%
BJD-1A/N886014
BK1-2
BM5GB53-45
BM6GB52-30CRMNSIA-H-2
BM6GB54-45/H-2
BONDING JUMPER
PROTECTIVE PIPE
LABLE SLEEVE
cover pc
SMALL SHAFT
SMALL SHAFT
CUP SHAPED JOINT
CUP ELBOW CONNECTION
CUP SHAPED JOINT
NIPPLE
Mounting Plate
LIGHT HOUSING
GLASS
GASKET
SPRING
3 POSITION 2 WAY RESET BUTT
THREE POSITION ONE WAY RES
CONTACT PIECE
O SHAPED SEALING WASHER
FRONT VERTICAL AXLE
PACK NUT
NUT
OUTER NUT
FRONT COVER ASSY
DECODING ASSEMBLAGE PLATE
DISPLAY PCB
MAIN UNIT ASSY
MAIN PLATE ASSY
MAIN UNIT PCB
SPRING WASHER
SEALING WASHER
BASE
OUTER COVER
BEARING
NAME PLATE
SPRING
ELECTRIC WIRE
WIRE
WIRE
WIRE
MICRO SWITCH
HEXAGONAL NUT
BUTTON
CONTROL SWITCH
CLOTH
TRANSFORMER
SAMPLE TERMINATION COXIAL
CAPACITOR 0.02UF
BUSH
MICRO SWITCH
SCREW
NUT
NUT
Page 19 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
MTR
EA
MTR
MTR
EA
EA
EA
EA
MTR
EA
EA
EA
EA
EA
EA
EA
EA
2.00
10.00
4.00
3.00
10.00
5.00
1.00
4.00
4.00
10.00
3.00
15.00
10.00
7.00
1.00
5.00
10.00
2.00
5.00
1.00
1.00
2.00
5.00
3.00
2.00
10.00
3.00
3.00
1.00
1.00
15.00
1.00
1.00
5.00
6.00
2.00
50.00
5.00
50.00
350.00
2.00
3.00
50.00
15.00
40.00
2.00
1.00
5.00
3.00
10.00
1.00
200.00
2.00
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
BM6GB54-45/ZL2
BM8GB54-66
BWH220
BYQ250-00-06
BYQ250-00-08
BYQ250-2-11-00A
BYQ250-2-20-00
BZ-3
C136100N
CT27-203-1-2-3
CX-1
CZ52-0.25UF±10%110V-50V
D436-37
DB-XM-1A
DIA4.763CIIGB308-64
DIA5.556CIIGB308-64
DT-2RV23A7
DT-6
E60024
E60064
F36018
F7512S
FA3-3.5-23-25.7
FFBL-1.5
FJ28-0.06A
FJ28-0.06T
FJ-28-0.06T
FJ28-0.17
FJ-37
FS1A-301
FS1A-500
FS1B-300Y
FS2A-023
FS2A-101
FS2A-102
FS2A-103
FS2A-300-Z
G10400
G7000102
GB6170-86-M2
GB65-85M3X6
GB68-85(M4X16)
GBK6-0001
GBK6-2000
GBK6-3000
GDG318-5002
GDG318-5100
GDG318-5200
GDG318-5204
GGJ8-090-000
GGJ8-111-000
GR-23
GT-DIS-03-01F
NUT (w/o Hole)
NUT
RESISTOR 200
BUFFER
CASING
END PIPE
METER CASE ASSY
FUSE SEAT
AVIATION BEARING
STEM
PIN JOINT
CAPACITOR
SCD
GLUE
STEEL BAL
STEEL BALL
EJECTION SWITCH
ELECTRIC GYRO
BALL BEARING
SPHERKAL BEARING
BEARING
BEARING
SPRING
WIRE
BULB
BULB
BULB
BULB
SIGNAL LIGHT
FLY WHEEL
ROCKER
FLY WHEEL
NUT
SUPPORT
BLOCK PIECE
SPRING PLATE
FLY WHEEL
REED ASSY
BEARING
NUT
SCREW
SCREW
CASING
ARMATURE IRON
COIL ASSY
SCREW PLUG
BASE ASSY
EJECTION CYLINDER ASSY
CUP SPRING
POTENIOMETER ASSY
VALVE HEAD
THERMO COUPLE
MOUNTING PLATE
Page 20 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
EA
EA
EA
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
30.00
3.00
20.00
5.00
7.00
4.00
20.00
50.00
2.00
5.00
50.00
2.00
50.00
5.00
5.00
2.00
2.00
10.00
20.00
3.00
1.00
1.00
1.00
100.00
40.00
230.00
3.00
50.00
4.00
3.00
3.00
10.00
3.00
7.00
2.00
1.00
2.00
4.00
2.00
40.00
5.00
15.00
6.00
1.00
5.00
1.00
3.00
1.00
1.00
2.00
3.00
15.00
1.00
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
GT-DIS-03-02
GT-DIS-03-04
GT-DIS-07-01F
GY-1
GY8-1A-05
GYY2-000-003
GZ-1200
GZ1301
H651-566-2
HB1-201G-M4X5/HB0-9-A
HB1-203FA-M5X7
HB1-203G-M2X5
HB1-203G-M3X6
HB1-203G-M4X9
HB1-205T-M2.5X6-0
HB1-521-10X18X2
HB1-521FA-5X12X1.5
HB1-521TC-10X20X1.5-SN
HB1-706-4X30
HB2-67-150
HB3-16LB-22
HB3-23-64
HB3-25-52
HB3-37LA-19
HB3-37LA-21
HB3-38LA-12
HB3-51-0.5X7X30
HB3-51-0.8X10X20III
HB4-50-10
HB4-67-4X21
HB4-67-6
HB6-17A11AG
HB6-17A-11AG
HB6-31-42X47
HB6-37-20X150
HM10GB1007
J6-7802-103
J6-7802-105
J7-0203-50
J7-0221-194
J7-0223-22/1
J7-0223-90/1
J7-0223-90/5
J7-0236-1
J7-0301-160/1
J7-0301-160/2
J7-0301-160/3
J7-0301-160/4
J7-0301-160/5
J7-0301-160/7
J7-0301-160/8
J7-0301-160/9
J7-0301-180A
COMPRESSIOR SPRING
WIRING CLIP
GUIDE COLUMN
NUT
HEAT RESISTNAT 3POINT SOCKET
LEAD SEALING RING
BEARING
BEARING
CHINA PIPE
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
WASHER
WASHER
WASHER
QUICK RELEASE STOP PIN
STEEL CABLE
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
TUBE CLAMP
SPRING
SPRING
WASHER
PIPE FITTING
PLUG
WIRE JOINT
TERMINAL
RUBBER PROTECTIVE
no.74-20x150
NUT
RING
CHAIN HOOK
SCREW
ACCESS COVER VALVE
RUBBER PAD
ACCESS COVER UP LOCK
UPPER PART OF LOCK
BOLT
PREFILE
SECTION MEMBER
PROFILE
PROFILE
PROFILE
PROFILE
PROFILE
PROFILE
ACCESS COVER
Page 21 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
25.00
25.00
1.00
4.00
2.00
7.00
2.00
25.00
15.00
20.00
7.00
10.00
140.00
3.00
25.00
6.00
7.00
8.00
35.00
2.00
6.00
30.00
8.00
20.00
10.00
1.00
1.00
2.00
1.00
1.00
3.00
1.00
5.00
40.00
20.00
3.00
2.00
6.00
8.00
5.00
5.00
2.00
2.00
3.00
15.00
15.00
5.00
20.00
15.00
20.00
20.00
20.00
40.00
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
J7-0301-34
J7-0301-651
J7-0301-681
J7-0302-20A
J7-0302-40
J7-0302-50
J7-0302-740A
J7-0302-742
J7-0310-30
J7-0310-612
J7-0604-1656
J7-0604-1661
J7-0604-2011
J7-0604-2658
J7-0604-50
J7-0604-52
J7-0604-57
J7-0605-454
J7-2043-73
J7-2045-53
J7-3000-602
J7-3500-37(Z)
J7-4001-16
J7-4001-22
J7-4001-9
J7-4003-101
J7-4003-11
J7-4003-32
J7-4003-56
J7-4004-2
J7-4004-6
J7-4100-19/3
J7-4100-37
J7-4102-114A
J7-4102-116
J7-4102-122
J7-4102-127
J7-4102-196
J7-4102-320
J7-4901-16
J7-4901-260
J7-4901-507
J7-5101-1130
J7-5101-1140
J7-5101-241
J7-5101-5213
J7-5102-125
J7-5102-131
J7-5102-133
J7-5311-1080
J7-5311-61
J7-5311-62
J7-5311-63
SCARFING RING
GASKET
GASKET
ACCESS COVER
SECTION MEMBER
SEALING PAD
ACCESS COVER
SCREW
BEARING
RING
PIN
ROLLER
ELBOW
CASE
BUSH
CAP
BUSH
screw
STUD
STOP BLOCK
BOLT
TRAILING EDGE SECTION MEMBER
BODY
NUT
PISTON
BOLT
HOOK
PISTON
NUT
NUT
WHEEL NUT
WASHER
PLUG
FILTER BLOCK
RETAINER
WASHER
NUT
SPECIAL WASHER
PIPE FITTING
SHAFT SLEEVE
LOWER JOINT
WASHER
PULLEY
PULLY
BUSH
BOLT
SUPPORTING RING
BUSH
NUT
T JOINT
CYLINCLER
COVER
PISTON
Page 22 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
20.00
4.00
140.00
30.00
20.00
15.00
10.00
100.00
3.00
3.00
2.00
2.00
2.00
2.00
5.00
4.00
3.00
4.00
4.00
15.00
3.00
1.00
1.00
2.00
3.00
2.00
15.00
2.00
2.00
10.00
3.00
1.00
10.00
4.00
4.00
2.00
2.00
4.00
2.00
1.00
1.00
4.00
20.00
15.00
4.00
2.00
3.00
2.00
4.00
2.00
3.00
2.00
2.00
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
J7-5311-73
J7-5311-77
J7-5501-38
J7-5501-50/1
J7-5501-50/2
J7-5503-101
J7-5503-102
J7-5503-116
J7-5503-153
J7-5503-174
J7-5503-90
J7-5505-1240
J7-5505-129
J7-5505-136
J7-5505-153
J7-5505-167A/1
J7-5505-176
J7-5505-189
J7-5505-19
J7-5505-21
J7-5505-210(L)
J7-5505-210(R)
J7-5505-220
J7-5505-223
J7-5505-234
J7-5505-235
J7-5505-292
J7-5505-30
J7-5505-461
J7-5505-620A
J7-5505-671
J7-5505-71
J7-5505-92
J7-5505-95
J7-5505-990
J7-5511-2850
J7-5511-3510
J7-5512-3
J7-5512-69(Y)
J7-5513-251
J7-5513-77
J7-5700-5118
J7-6100-1070
J7-6100-112
J7-6100-790
J7-6103-104/2
J7-6110-54
J7-6404-30
J7-6407-125
J7-7202-474
J7-7202-4985
J7-7202-840
J7-7219-104/2
BUSH
NUT
NUT
AXIS RH
AXIS LH
LINING
ELBOW NIPPLE
RING
ROD HEAD
ROD
COVER
VALVE
ROTATING JOINT
3WAY JOINT
ELBOW
PIPE UNION
PISTON
NIPPLE
FELT
ELBOW
HOUSING
HOUSING
THREADED PLUG
LID
OUTER SHELL
VALVE
COVER
CASING
SLEEVE
PIPE UNION
SLEEVE
THREADED PLUG
SPRING
COVERRING
VALVE
CLEAT
BRACKET
PRESS BLOCK
3 WAY CONNECTOR
3-WAY JOINT
JOINT
BOLT
clip
OUT BODY
NIPPLE
CLAMP
CASING
AIR BLEED SHORT PIPE
PIPE
BOLT
CLIP
COVER
TERMINAL LUG
Page 23 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
PR
EA
EA
EA
EA
EA
EA
PR
EA
EA
EA
EA
EA
PR
EA
EA
EA
EA
8.00
2.00
2.00
1.00
1.00
3.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
5.00
20.00
2.00
5.00
2.00
1.00
3.00
3.00
3.00
2.00
4.00
4.00
1.00
2.00
2.00
2.00
1.00
2.00
4.00
4.00
3.00
1.00
1.00
3.00
1.00
4.00
1.00
6.00
2.00
1.00
3.00
2.00
30.00
4.00
10.00
3.00
1.00
1.00
1.00
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
J7-7219-254/3
J7-7219-30
J7-7219-331
J7-7219-332/1
J7-7219-346
J7-7219-394
J7-7220-600/5
J7-7600-4
J7-7600-6
J7-7604-70
J7-7701-50
J7-7806-90
J7-7810-28
J7-7810-29A
J7-8400-750
J7I-4102-112A
J7I-4102-126A(L)
J7I-4102-126A(R)
J7I-4102-130A
J7I-4102-13A
J7I-4102-310A(L)
J7I-4102-310A(R)
J7I-5502-2004
J7II-0313-300-3
J7II-0606-105
J7II-5602-20
J7II-5603-16
J7II-5603-17
J7II-5603-18
J7II-5603-42
J7II-6115-1301
J7II-7103-510
J7L-0209-0-6
J7L-0603-38/1
J7L-0605-103
J7L-0605-104
J7L-0605-106
J7L-0605-108
J7L-4100-525
J7L-4100-6
J7L-4102-129
J7L-4102-160
J7L-4102-170
J7L-4102-170(L)
J7L-4102-170(R)
J7L-4102-305
J7L-4102-306
J7L-5101-103
J7L-5101-1101
J7L-5101-1414
J7L-5101-1417
J7L-5101-231-1H
J7L-5311-70
RUBBER PIPE
NIPPLE
SILICON PIPE
TERMINAL HANDLE
TERMINAL HANDLE
CABLE END
BONDING JUMPER
CONNECTOR
UNION
SEALING RING
RUBBER CAP
CLAMP
BUSH
COVER
VALVE COVER
UNT
UNIVERSAL JOINT
UNIVERSAL JOINT
ELBOW UNION
NUT
UNION
UNION
STOP SCREW
INNER COVER
RING
CASING
TORSIONAL SPRING
PIN
PIN
FORK
BOLT
RUBBER SLEEVE
SEAL
spacer
PISTON ROD
BUSH
NUT
WASHER
UPPER SHAFT SLEEVE
ELBOW UNION
SPRING RING
PISTON ROD
OUTER BODY
OUTER BODY
OUTER BODY
BOLT
JOINT
SHAFT
SHAFT
SPRING
SPRING
STEEL CABLE
ROD WITH PISTON
Page 24 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
1.00
7.00
5.00
2.00
2.00
10.00
2.00
1.00
4.00
4.00
30.00
2.00
9.00
6.00
8.00
4.00
4.00
4.00
1.00
1.00
4.00
4.00
4.00
2.00
2.00
5.00
2.00
3.00
2.00
1.00
3.00
50.00
10.00
2.00
2.00
4.00
5.00
4.00
5.00
2.00
4.00
1.00
1.00
4.00
1.00
4.00
4.00
1.00
2.00
1.00
1.00
1.00
3.00
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
J7L-5311-95
J7L-5505-1121
J7L-5505-1122
J7L-5505-1128
J7L-5505-1129
J7L-5505-1132
J7L-5505-1334
J7L-5505-246
J7L-5505-7004
J7L-5505-7005
J7L-5505-7007
J7L-5505-7100
J7L-5511-1631
J7L-5511-6001
J7L-5512-170
J7L-5603-19
J7L-6100-230
J7L-6100-903
J7L-6100-904
J7L-6103-7013
J7L-6103-7140
J7L-6103-7150
J7L-6104-6091
J7L-6104-6092
J7L-6107-70
J7L-6110-6161
J7L-6110-6170
J7L-6501-6105
J7L-7101-790/1
J7L-7202-516
J7L-7219-430
J7L-7219-50/3
J7L-7219-50/5
J7L-7219-50/6
J7L-7219-52
J7L-7219-53
J7L-7600-3350-1
J7L-7600-580A-1
J7L-7600-681
J7L-7600-682
J7L-7600-683
J7L-7600-684
J7L-7600-687
J7L-7600-688
J7L-7702-155
J7L-7806-130
J7LB-4901-245/1
J7LB-7209-05
J7LP-0239-0-43
J7LP-0239-7
J7LP-0601-250
J7LP-0602-1611
J7LP-4100-215Y
PLACARD
CASING
COVER
SPACER
PLATE
SPACER
SPACER
connector
BLOCKAGE
BLOCKAGE
T JOINT
OIL LEVEL OBSERVATION
CLEAT
JOINT
CONNECTOR
BUSH
PIPE
COVER
VALVE
pipe
VAL CAS
INVERTED FLT VAL
CONNECTING PIPE
VALVE
FILLER CAP
CHECK VALVE
VALVE
SPRING
BONDING JUMPER
CLAMP
TERMINAL HANDLE
SLEEVE
SLEEVE
RUBBERISED FABRIC TUBE
CONNECTOR
TERMINAL END
PIPE ASSY
PIPE
MOUNT
SECTOR VALVE
SECTOR VALVE
ROTARY NOZZLE
SPECIAL CASING
FIXED SLEEVE
COVER
SUPPORT ARM
BOLT
CLOTH COVER
PARTITION
SCREW
PLACARD
MIRROR PIECE
HALF AXLE
Page 25 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
2.00
4.00
3.00
200.00
48.00
4.00
4.00
2.00
1.00
4.00
2.00
3.00
2.00
1.00
1.00
2.00
1.00
5.00
2.00
1.00
3.00
3.00
1.00
1.00
2.00
5.00
15.00
1.00
2.00
4.00
1.00
1.00
2.00
1.00
4.00
9.00
1.00
1.00
30.00
15.00
15.00
35.00
6.00
25.00
8.00
2.00
5.00
4.00
10.00
30.00
3.00
10.00
10.00
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
J7LP-4901-241
J7LP-5505-570
J7LP-5511-1710
J7LP-5511-1712
J7LP-5511-1720
J7LP-5511-6002
J7LP-5512-1210
J7LP-6100-7030-2
J7LP-6100-7660-1
J7LP-6100-7851
J7LP-6103-100
J7LP-6103-8485
J7LP-6103-8510
J7LP-6103-8521
J7LP-6103-8522
J7LP-6103-8610
J7LP-6107-7120
J7LP-6110-0-7660
J7LP-6110-6171
J7LP-6110-7320
J7LP-6409-250
J7LP-7103-834
J7LP-7202-5570
J7LP-7215-222
J7LP-7219-105/1
J7LP-7219-105/3
J7LP-7219-105/4
J7LP-7219-105/5
J7LP-7219-105/6
J7LP-7219-105/7
J7LP-7219-254/3
J7LP-7219-50-4
J7LP-7219-51
J7LP-7701-130
J7LP-7701-30
J7LP-7701-561
J7LP-7701-81/1
J7LP-7701-81/2
J7LP-7701-81/3
J7LP-7701-81/4
J7LP-7801-590
J7LP-7810-30A
J7LP-8400-404
J7LP-8400-419
J7P-5101-621
JK2-1
JR-1
JT7-001
JZX-10M-RG4.523-259-5
JZZ-5E
K6.00.01
KJY19-0013
KJY-19-1000
SUPPORT ARM
COMPLEMENT UNIT DF DEP VALVE
PULL ROD
RING
PULL ROD
ELBOW CONNECTOR
JOINT
PIPE
PIPE
DISK
FUEL TANK NO.3 UPPER
JOINT
OIL PROOF DISK
VALVE CASING
VALVE
CASING
OUTER CASING ROCKET
PIPE
NIPPLE
CLAMP
TWO-LITRE OXY.BOTTLE
GASKET
OUTER SLEEVE
SHROUD
RUBBER LABEL HOSE
RUBBER LABEL HOSE
RUBBER LABEL HOSE
RUBBER LABEL HOSE
RUBBER LABEL HOSE
RUBBER LABEL HOSE
RUBBER PIPE
RUB.FABRIC PIPE
WIRE HANDLE
SLEEVE
SLEEVE
RIVET
BLUE HANDLE SLEEVE
WHITE HANDLE SLEEVE
RED HANDLE SLEEVE
YELLOW HANDLE SLEEVE
FOUR-LITRE OX. BOTTLE
STOWING CABLE
SHAFT
NUT
BUSH
TURN ON SWITCH
RELAY
CASING
RELAY
AUTO SYSTEM
MAIN BODY
SPRING
BELLOWS BOX
Page 26 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
4.00
2.00
2.00
3.00
1.00
1.00
2.00
1.00
5.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
3.00
5.00
10.00
4.00
1.00
4.00
5.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
2.00
2.00
1.00
15.00
30.00
6.00
40.00
9.00
1.00
15.00
5.00
1.00
5.00
3.00
2.00
4.00
5.00
4.00
1.00
6.00
2.00
1.00
2.00
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
KJY8A-00-1
KJY8A-00-10A
KPT06F18-32SX
L8-J3
LB7-04
LG3-645-104
LKJ2-148-000
LQ15-001
LQ15-003
LQ15-300
LQ15-400
LQ15A-51-0
LQ15C-005
LQ15D-002
LQ5A-19-0
LQ5A-27-0
LQ5A-41-0
LS115B-109
LS115B-202
LS117-205
LS117-213
LS16D-34
LS16DH-13
LS16P-16
LS16P-33
LS16P-70
LS16PH-50
LY12M-1.5MM
LY12M-2MM
M1.4X2GB67-66
M1.4X8GB65GZN
M1.6X8GB68-66
M100112
M2.5X12GB67-76
M2.5X5GB68G
M2.5X6GB30-66
M2.5X8GB65-35
M22759/4-8
M3-2X16GB67-66
M3X16GB67HP659-1
M3X16GB67-HP659-1
M3X16GB67-HPB59-1
M4X12GB65HPB59-1Y
M4X14BM2.5
M5.022.161
M5.464.004
M5-001-106
M5-240-011
M5-240-012
M5-292-013
M5-441-090
M5-441-107
M5-468-044
HOUSING
3 WAY PIPE
PLUG
PLUG
PIPE ASSY
2 PIN PLUG
VOLUME CONTROL (62KOHM)
SHAFT
WINDOW
BUSH
VETILATER ASSEMBLY
SCREW
TURBINE DISK
CASING
NUT
BUSH
BOLT
AXLE SLEEVE
PISTON
SPRING
COVER
PISTON
AIR VALVE NIPPLE BODY
GEAR
FLANGE
DISK
CASING
ALUM SHEET
ALUM SHEET
SCREW
SCREW
SCREW
HOUSING ASSEMBLY
SCREW
BOLT
BOLT
SCREW
WIRE
SCREW
SCREW
SCREW
SCREW
CYLINDER HEAD SCREW
SCREW
UPPER BASE SPEED REDUCER
NIPPLE WIT CAPILLARY TUBE
HOUSING ASSY
EXT ROD
EXT ROD SHORT
SPEED REDUCER
LOWER POINTER
POINTER W/BUSH
BELLOW ASSY
Page 27 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
KG
EA
EA
EA
EA
EA
EA
EA
EA
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
5.00
5.00
2.00
2.00
3.00
1.00
4.00
1.00
2.00
2.00
2.00
4.00
2.00
2.00
2.00
6.00
2.00
2.00
1.00
1.00
2.00
30.00
9.00
2.00
2.00
2.00
1.00
5.00
5.00
3.00
3.00
15.00
1.00
50.00
5.00
3.00
3.00
2.00
100.00
25.00
50.00
40.00
10.00
3.00
3.00
5.00
5.00
1.00
1.00
5.00
2.00
6.00
1.00
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
M5-468-057
M6.724.066
M8.950.236
M8-001-094
M8-001-095
M8-281-003
M8-402-005
M8-402-009
M8-903-031
M8-904-005
MBEU-1632GQ5
MS118-3418-14N
MS27473T18B32S
MS3106E20-27S
MS3106F-24-6PW
MS3126F14-12S
N5474062
N5483033
NK2-5(P)
P20J2A/S
P20J9Q
P20K3Q
P20K9AQ
P36J6MQ
P36K6Q
PD-13T
PD-2A
PD-2T
PD-7A
PJ250AB
PR16K4P
PR20J3A
PR20K10Q
PT06E-16-26S
PT06E-18-32SX
PTG08E22-55S
Q/11D-09-1.2-11-26
Q/2E151-2.8-69
Q/3A4-25J9-38X45X2
Q/3A4-72LB4
Q/3A4-91A12X18.2
Q/3A4-96G3
Q/3A4-97-4
Q/3A6-55-1
Q/3D1-1.2X19X47
Q/3D135-083
Q/6A4-77-4
Q/BM7.748.153
Q-2
Q30J55P
Q98-1
QAH142-4/150
QDF10-101
PRESSURE BELLOWS
UNIT
WASHER
CASING
CASING
SPRING
GLASS
GLASS
COUNTER SUNK SCREW
SCREW
SEAT PLUG
WIRE PRESSING CLIP
CONNECTOR
PLUG
PLUG
PLUG
NUT
WASHER
SWITCH
CONNECTOR
PLUG
PLUG
PLUG
PLUG
plug
PLUG
SOCKET
PLUG
SOCKET
plug
PLUG
SOCKET
PLUG
PLUG
PLUG
PLUG
spring
PROTECTIVE WASHER
RUBBER RING
SLEEVE
CHECK RING
bent union
nut
WIRE CONNECTING
SPRING
CLAMP
NOZZLE
GROUNDING RING
WASHER
PLUG
RUBBER LIQUID
OXYGEN BOTTLE
THREDED PLUG
Page 28 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
EA
1.00
6.00
2.00
5.00
6.00
3.00
2.00
3.00
20.00
8.00
6.00
2.00
1.00
4.00
4.00
5.00
8.00
4.00
1.00
5.00
4.00
2.00
2.00
1.00
1.00
4.00
10.00
6.00
20.00
2.00
20.00
8.00
2.00
1.00
1.00
1.00
6.00
2.00
4.00
3.00
1.00
10.00
10.00
8.00
4.00
1.00
2.00
2.00
8.00
4.00
10.00
2.00
5.00
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
QDF10-108
QDF10-114
QDF42-1000/1
QDF42-1004
QDF42-3000
QDF42-4000
QHC-1
QL10-00-2
QMO-41-J7
QS1-03
QS11-02
QS11-08
QS11-20
QS11A-01
QS11A-02
QS11A-04
QS11A-10
QS8-02
QS8-05
QS8-06
QSF1A-006
QSF6A-001
QXF11A-001
QXF25/1-0001
QXF25/1-0002
QXF25-00-1
QXF59/1-0002
QYF3-002
QYF3-003
QYF3-008
QYF3-022
RC07GF103J
RC07GF222J
RC07GF223J
RC07GF472J
RC20GF330K
RJ-0.5-1K-I
RJ-0.5-6.8K-I
RJ2-0.25-7.5M±5%
RX-4W-1OHM
RXF3A-00-1
RXYC-25-T-24±10%
S063-2
S1.04.00
S1-07-00
S1080
SFM-3
T1.02.00
T2M-D0.8
TB-5
TPX-1AY-2000Y
TPX-1AY-2001Y
TPX-1AYZ-2000
SPRING
CASING
ELETROMAGNET
ARMATURE
INLET VALVE
BLEED VALVE
damper
CAP
SEAL RING
NUT
GUIDE
SPRING PLATE
COIL ASSY
NIPPLE
LOCKING NUT
LOCKING WASHER
VENTILATION COVER
PUSH ROD
SCREW
ADUSTING UNION NUT
HANDLE
HOUSING
HOUSING
CASING
NIPPLE
BODY
VALVE
WASHER
WASHER
SCREW
PIN
RESISTOR 10K
RESISTOR 2200
RESISTOR 22K
RESISTOR 390
RESISTOR
RESISTER
RESISTOR
RESISTER
RESISTOR
HOUSING
RESISTOR
RING
HOUSE ASSY
BOURDON TUBE WITH NIPPLE
TAPE
TEFLON MEMBRANCE
VALVE
COPPER WIRE
FUSE
SPORT ARM
SUPPORT ARM
SUPPORT ARM
Page 29 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
MTR
EA
KG
EA
EA
EA
EA
1.00
5.00
4.00
1.00
10.00
10.00
6.00
10.00
10.00
3.00
20.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
10.00
2.00
2.00
15.00
2.00
4.00
6.00
10.00
9.00
3.00
6.00
25.00
2.00
5.00
20.00
20.00
10.00
20.00
3.00
4.00
4.00
6.00
2.00
1.00
7.00
3.00
5.00
10.00
3.00
10.00
15.00
10.00
5.00
3.00
1.00
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
TPX-1AYZ-2001
TPX-1AZ-2000Z
TPX-1AZ-2001Z
WQ2-067-012MX
WQ6-604-008
WQ8-684-005
WS-1-0.5-4.7K
X24J19CJ
X30J32CJ
X30K32PJ
X98-1
XA3359J
XC30530MD
XH33F32KH
XK11YJ4ZE
XKE14R3W
XKE14YF6ZQ
XKE18R5Q
XKE24R14Q
XKE24YF14ZQ
XKE30F24Q
XKE30F24ZQ
XKE30F24ZW
XKE30R24Q
XKE30R24UW
XKE30R24W
XKE30R24ZW
XKE30YF24ZQ
XKE30YF24ZW
XKE36R51UW
XNK-2
XPJ-3-5A
Y4Z
YB-1
YD-1-1V
YD13-11
YD13-15
YD13-26
YD-1-IV
YDF12-1
YDF12-12
YDF12-14
YDF12-33
YDF12-5
YDF14-1
YDF15-03
YDF15-4
YDF22-102
YDF22-105
YDF22-109
YDF22-111
YDF22-115
SUPPORT ARM
SPORT ARM
SUPPORT ARM
FILTER DJL-255
RECEPTICAL
SEAL RING
VARIABLE RESISTOR
PLUG
PLUG
PLUG
RUBBER LIQUID
CAPACITOR, MYLAR, 0.47µF±5%, 100
VDCW
body plug
SOCKET
PLUG
CABLE
PLUG
PLUG
PLUG
PLUG
PLUG
PLUG
SOCKET
PLUG
PLUG
PLUG
PLUG
SOCKET
PLUG
PLUG
SWITCH
WAVE ABSORBING RUBBER PLATE
4 PIN SOCKET
PLUG
WIRE FOR FLOURSCENT
SEAT
SEAT
WASHER
WIRE FOR LOOVESENT
DISTRIBUTING VALVE
THREDED PLUG
SLEEVE
PUSH ROD
FILTER
CASE
COIL
PISTON
SLEEVE
COVER
VALVE SEAT
SPRING PAD
PLUNGER
Page 30 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
1.00
5.00
4.00
3.00
1.00
3.00
2.00
3.00
2.00
2.00
1.00
EA
2.00
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
SET
MTR
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
2.00
1.00
2.00
4.00
1.00
5.00
6.00
4.00
2.00
6.00
1.00
3.00
20.00
10.00
1.00
2.00
5.00
1.00
2.00
2.00
1.00
40.00
8.00
2.00
2.00
20.00
25.00
2.00
2.00
10.00
2.00
2.00
3.00
5.00
1.00
4.00
6.00
2.00
6.00
4.00
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
YL5-004
YL5-300A
YL7-002
YL7-300
YL7-400
YLF11-00-2-1
YLF9-00-1
YLF9-00-4
YQY250-10-00
YXF20-10-4
YXF20-11
YXF23-10-1
YXF23-10-4
YXF23-11
YXF23-11-2W
YXF8-003
YXF9-001
YXF9-003
YY2-08
YY4-02
YYF15-00-1
YYF15-00-4
YYF15-00-5
YYF18-00-3
YYF21-00-2
YYF4-32
ZA10-5
ZCD-11
ZD-D1
ZHF28-450/180
ZHF-28-450/180
ZKC-20
ZL-45280A/ZL-44290A/ZL-44300A
ZL-49266
ZL-49294R
ZL-51250
ZL7-2
ZP-5
ZSD-9
ZSD-9(B)
ZSD-9(R)
ZSD-9(RED)
ZSD-9(Y)
ZX-0207KCL-1
VALVE
FILTER ELEMENT
FILTER CAP
FILTER ELEMENT
VALVE
BUZZER PLATE
HOUSING
BUSH
SUPPORT ASSY
BODY
VALVE
PIPE CONNECTION
BODY
VALVE
PIN
BODY
FITTING
CASE
SUPPORT
COVER
PLUG
STOP RING
SCREW
HOUSING
SPRING
FLANGE
GREASE
LIGHT ASSY
LOCKING WIRE
LANDING TAXING BULB
LIGHT
AUTO CIRCUIT BREAKER
GUIDE VALVE SET
PIN
NUT
PRIMARY VALVE
GREASE
SCREW
RED INDICATOR LIGHT
BLUE LIGHT
RED LIGHT
INDICATING LIGHT
YELLOW LIGHT
CABLE
Notes:1.
Quotation must be submitted on ‘FOB’ basis only.
2.
Payment will be made as per PAC Board procedure.
Page 31 of 36
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
KG
EA
KG
EA
EA
EA
SET
EA
EA
EA
KG
EA
EA
EA
EA
EA
EA
EA
5.00
9.00
10.00
10.00
10.00
100.00
3.00
2.00
3.00
8.00
4.00
3.00
8.00
5.00
2.00
4.00
1.00
2.00
1.00
1.00
3.00
5.00
3.00
3.00
2.00
1.00
20.00
30.00
1.00
3.00
40.00
5.00
2.00
15.00
1.00
5.00
40.00
4.00
30.00
4.00
7.00
4.00
7.00
2.00
3.
Packing of the stores should be adequately done with absolute resistant material
so as to avoid from any damage during transportation.
4.
Stores must be of latest production series.
5.
Shelf life items must have 90% life upon.
6.
MSDS and TDS for chemical items must be provided.
7.
All the Rubberized material / Lubricants / Greases / Chemical must be packed
separately / independently without honey combing or combined packing of two are more
items. Date of manufacture and date of expiry are to be clearly marked on all related
documents.
Page 32 of 36
Annexure “D”
Form PACB-02A
PAKISTAN AERONAUTICAL COMPLEX BOARD
KAMRA
SCHEDULE TO TENDER
1.
TENDER INQUIRY NO: PACB/721/260815022/0266/P-3
2.
Time and Date of opening Tender at 1100 Hrs on 09-11-2015
Extended up to
1100 Hrs on 19-11-2015
(1)
(2)
(3)
(4)
Item No
Part No. Description of stores
Unit of
Qty
with specifications
issue
(5)
Price per unit
(6)
Total price
Grand Total
Signature of Tenderer
(Capacity in which signing)
Page 33 of 36
Annexure “E”
Form PACB - 02B
UNDER TAKING
(Fill in and Return)
To:
Member Commercial
Pakistan Aeronautical Complex Board
Kamra Distt Attock
Dear Sir,
I/We hereby offer to supply to PAC Board the stores detailed in the Schedule
to Tender or such portion thereof as you may specify in the contract at the prices
given in Form PACB – 02A and further agree that this offer will remain valid up to
and will not be withdrawn or altered in terms of rates
quoted and the condition stated therein on or before this date. I/We shall be bound
by your communication of acceptance to be dispatched within the prescribed time.
I/We understood the instructions to Tenders and condition of contract as laid
down in Form PACB-10 titled “General Conditions Governing Contract” and
thoroughly examine specification / drawing and / or patterns quoted in the Schedule
to Tender and am/are fully aware to the nature of the stores required and my/our
offer is to supply stores strictly in accordance with the requirements.
Witness’s Signature:
Signature of Tenderers:
Name:
Name:
N.I.C No.
N.I.C No.
Address:
Capacity in which Signing:
Date:
Address:
Date:
Tele: Telex/Fax
Page 34 of 36
Annexure “F”
PACB-02C
SPECIAL INSTRUCTIONS
Under mentioned information must be available from your quotation else your
quotation will be rejected: (i)
Currency of quoted price.
(ii)
Delivery period (Not later than 30-09-2016 or within 03 months after
signing of the contract).
(iii)
Quotation Valid up to 30 June, 2016.
(iv)
Country of origin.
(v)
Port of shipment (for PNSC/PIAC only.)
(vi)
Terms of payment are as under:50% on shipment (negotiable) and remaining 50% on CRV’s with
10% Performance bank guarantee through CMA (DP) RWP.
(vii)
(viii)
(ix)
Name of beneficiary with complete address for Letter of Credit.
Foreign Bank (if any) for Letter of Credit confirmation.
Minimum acceptable contract value.
Page 35 of 36
Annexure “G”
GENERAL CONDITIONS FOR BG
(a)
To ensure timely and correct supply of stores, the firm will furnish an unconditional Bank
Guarantee within 30 days of the signing of the contract from a schedule Bank for an amount of
__________________ i.e. 10% of the total value of the contract (on a judicial Stamp paper of the
value of Rs 100/-). The Bank Guarantee shall be endorsed in favour of CMA who is the Account
Officer specified in the contract. The CMA concerned shall have the like power of seeking
encashment of the Bank Guarantee as if the same has been demanded by the purchase officer
himself.
(b)
The Bank Guarantees will be of following types with validity and amount has mentioned in
each type
(1) Bank Guarantee against contract performance
It will be between 10% of total
value of contract excluding taxes/duties and freight/handling charges etc. It shall remain
inforce till 60 days beyond the Delivery Period stipulated in the contract.
(2) Bank Guarantee against Advance/ Down Payment. It will be equal to amount paid in
advance /down payment shall remain valid till 60-days beyond the Delivery Period stipulated
in the contract.
(3) Bank Guarantee against Warranty Period. It will be for amount of 10% of contract
value excluding taxes/duties and freight /handling charges, etc. Duration of BG against
Warranty Clause is variable. Normally under DP-15, it is for one year for the general type of
equipment/ spares. For consumable goods, the warrantee period should also expire after
6 months or when the goods are fully consumed whichever is earlier or as per terms of
contract.
(c)
If the supply of store is on warranty, the supplier shall be bound to extend the validity of
Bank guarantee for such further reasonable period if so required by the purchase officer to cover
the warranty period.
(d)
If the supplier fails to provide the Bank guarantee within 30 days after signing a contract,
such failure shall constitute a breach of contract and the Director purchase shall be entitled to
make other arrangements at the risk and expense of the supplier if no other BG / earnest money
of the same supplier for an equal amount is held up for final release, with the purchaser against
any other completed contract(s). In the event of unsatisfactory performance or of any breach of
terms of the contract, Bank guarantee shall be forfeited to the Govt. at the discretion of the
purchaser. On satisfactory performance of the contract, the Bank Guarantee will be returned to
the supplier by CMA (DP) RWP on receipt of instruction from the purchaser i.e. Directorates of
Procurements etc.
(e)
In case of FOR tenders/contract it is imperative that BGs are obtained from
firms/suppliers/agents through scheduled Banks of State Bank of Pakistan so as to safeguard
the interest of the state.
(f)
In case of FOB tenders/contracts, Bank Guarantee is to be obtained preferably from LC
opening Bank of Pakistan and through supplier, LC opening Bank abroad. In case firm does not
agree to the aforesaid condition, then BG should at least, be obtained from supplier‘s country
Bank located in Pakistan or any enlisted scheduled Bank of Pakistan in favour of LC opening
Bank in Pakistan or any scheduled Bank of Pakistan, and the same will be a Bank to Bank
Guarantee in favour of CMA (DP) Rwp.
Page 36 of 36