TECHNICAL SPECIFICATION
TEMPERATURE PROBE
AT-487 (PT100)
ENSURING SYSTEM PERFORMANCE
The AT-487 temperature sensor is installed on the chamber wall and does not penetrate into the fluid.
The probe is designed to prevent high surface temperatures on the UV chamber.
Technical Specification
Model number
Manufacturer
Mounting
Element material
Housing material
IP rating
Connection cable
Type
Accuracy
Resistance
Pressure rating
Connection
Operating temperature range
Storage temperature range
*
AT-487
ETS UV by Neptune Benson
M6 stud
Mild steel stud M6
Polyacetal
NEMA6 (IP67)
AT-573
PT-100
+/- 1°C
100 ohms at 100°C
Not applicable, no direct contact with fluid
4 pin
-50°C up to + 70°C *
-50°C up to + 70°C
Only calibrated 0°C up to 100°C
neptunebenson.com • ets-uv.com • 238 Commercial Drive Beaver Dam, WI 53916 • 920.885.4628
2015 03