Thin-Film Cascadable Amplifier 10 to 1000 MHz Technical Data

Thin-Film Cascadable Amplifier
10 to 1000 MHz
Technical Data
UTO/UTC 1043 Series
Features
Description
• Frequency Range: 10 to
1000 MHz
• High Dynamic Range
• Low Noise Figure: 2.5 dB
(Typ)
• Medium Power Output:
+8.0 dBm (Typ)
• Temperature Compensated
• Surface Mount Option
Applications
• Wideband RF System Front
End
Pin Configuration
The 1043 Series is a thin-film
bipolar RF amplifier using lossless
feedback for low noise, high
dynamic range and efficient
operation; and active bias circuits
to assure good temperature
compensation and increased
immunity to bias voltage variations. The 1043 Series amplifiers
are available in three packages:
the surface mount PlanarPak
PP-38 (.375 in. x .375 in.) case, the
TO-8 hermetic case and the
connectorized TC-1A case.
UTO—TO-8T
RF IN
GROUND
RFOUT
V+
CASE GROUND
UTC—TC-1A
RF IN
RF OUT
V+
• Surface Mount Assembly
Schematic
Maximum Ratings
Parameter
V+
RFIN
RFOUT
DC Voltage
Continuous RF Input Power
Operating Case Temperature
Storage Temperature
“R” Series Burn-In Temperature
Maximum
+17 Volts
+13 dBm
–55 to +125°C
–62 to +150°C
+125°C
Thermal Characteristics1
θJC
Active Transistor Power Dissipation
Junction Temperature Above Case Temperature
MTBF (MIL-HDBK-217E, AUF @ 90°C)
105°C/W
176 mW
19°C
767,000 Hrs.
Weight: (typical) PPA—0.5 grams; UTO—2.1 grams; UTC —21.5 grams
2
Electrical Specifications1
(Measured in 50 Ω system @ +15 VDC nominal unless otherwise noted)
Symbol
BW
GP
—
NF
P 1dB
—
—
IP3
IP2
HP2
ID
Typical
Guaranteed Specifications
TC = 25°C TC = 0 to 50°C TC = –55 to +85°C
Characteristic
Frequency Range
Small Signal Gain (Min.)
Gain Flatness (Max.)
Noise Figure (Max.)
Power Output @ +1 dB Comp. (Min.)
Input VSWR (Max.)
Output VSWR (Max.)
Two Tone 3rd Order Intercept Point
Two Tone 2nd Order Intercept Point
One Tone 2nd Harmonic Intercept Point
DC Current
10-1000
10.0
± 1.0
4.0
+6.0
2.0:1
2.0:1
—
—
—
—
10-1000
10.5
± 0.5
2.5
+8.0
<1.5:1
<1.7:1
+19.0
+28.0
+35.0
25
Unit
MHz
dB
dB
dB
dBm
—
—
dBm
dBm
dBm
mA
10-1000
9.0
±1.0
4.5
+6.0
2.0:1
2.0:1
—
—
—
—
Note: 1. Both RF input and RF output pins are at DC ground—no blocking capacitor.
Typical Performance Over Temperature (@ +15 VDC unless otherwise noted)
Key: +25°C
+85°C
-55°C
Noise Figure
Gain
4
Noise Figure, dB
Gain, dB
12
11
10
3
2
9
1
200
0
400
600
800
0
1000
200
Frequency, MHz
2.0
1.75
1.75
8
VSWR
9
1.5
1.25
7
200
400
600
800
200
Frequency, MHz
600
800
35
15
400
600
Frequency, MHz
200
800
1000
400
600
800
1000
Second-Harmonic Intercept Point
45
30
25
200
0
Frequency, MHz
HP2, dBm
20
0
1.0
1000
Second-Order Intercept Point
40
IP2, dBm
IP3, dBm
Third-Order Intercept Point
10
400
Frequency, MHz
25
1000
1.25
0
1000
800
1.5
1.0
0
600
Output VSWR
Input VSWR
2.0
VSWR
Power Output
@ 1 dB Gain
Compression, dBm
Power Output
10
400
Frequency, MHz
40
35
30
0
200
400
600
Frequency, MHz
800
1000
0
200
400
600
Frequency, MHz
800
1000
3
Automatic Network Analyzer Measurements (Typical production unit @ +25°C ambient)
Numerical Readings
FREQUENCY
MHz
100.0
200.0
300.0
400.0
500.0
600.0
700.0
800.0
900.0
1000.0
1100.0
1200.0
1300.0
1400.0
1500.0
Bias = 15.00 Volts
VSWR
IN
GAIN
dB
PHASE
DEGREES
PHASE
DEV
GROUP DELAY
ns
VSWR
OUT
ISOLATION
dB
1.09
1.19
1.29
1.36
1.39
1.38
1.32
1.22
1.08
1.08
1.25
1.44
1.61
1.73
1.80
10.77
10.67
10.67
10.72
10.83
10.95
11.05
11.19
11.14
10.95
10.43
9.69
8.73
7.63
6.46
160.26
152.36
137.24
122.72
108.58
94.02
78.88
61.92
43.90
25.03
5.65
–14.26
–31.95
–48.41
–63.92
–5.71
–4.78
–3.07
–.75
1.94
4.22
5.71
5.79
4.59
2.56
.02
–3.04
–3.90
–3.53
–2.20
.00
.43
.42
.39
.40
.42
.44
.48
.52
.54
.56
.51
.47
.44
.00
1.17
1.35
1.53
1.69
1.79
1.81
1.74
1.58
1.35
1.10
1.15
1.45
1.80
2.16
2.56
16.80
16.72
17.08
17.24
17.32
17.39
17.40
17.35
17.29
17.20
17.43
17.60
18.14
18.72
19.37
S-Parameters
Bias = 15.00 Volts
S 21
S 11
S12
S 22
FREQUENCY
MHz
Mag
Ang
dB
Ang
dB
Ang
Mag
Ang
100.00
150.00
200.00
250.00
300.00
350.00
400.00
450.00
500.00
550.00
600.00
650.00
700.00
750.00
800.00
850.00
900.00
950.00
1000.00
1100.00
1200.00
1300.00
1400.00
1500.00
.043
.065
.088
.113
.131
.146
.154
.161
.163
.158
.151
.142
.125
.103
.080
.052
.017
.025
.057
.131
.188
.236
.259
.279
132.7
104.3
87.0
73.5
65.9
57.4
49.2
41.2
34.0
26.5
20.2
12.0
4.5
–4.6
–14.7
–24.8
–53.0
177.0
153.7
128.2
112.5
88.9
87.9
80.0
10.733
10.682
10.607
10.572
10.599
10.632
10.685
10.757
10.784
10.885
10.865
11.017
11.080
11.173
11.216
11.235
11.167
11.113
10.971
10.422
9.693
8.713
7.607
6.496
167.3
159.2
151.1
143.2
135.6
126.0
120.6
113.5
105.9
98.6
91.0
83.1
75.0
66.5
57.7
48.6
39.0
29.1
19.4
–.7
–21.0
–39.0
–56.0
–72.2
–16.533
–16.771
–16.946
–16.949
–17.247
–17.155
–17.085
–17.273
–17.291
–17.319
–17.320
–17.373
–17.426
–17.279
–17.303
17.327
–17.281
–17.233
–17.276
–17.405
–17.669
–18.138
–18.694
–19.401
169.4
161.0
154.2
147.6
140.9
134.5
129.0
123.3
117.7
112.0
106.5
100.9
96.1
90.3
84.6
78.6
72.6
66.6
60.7
47.6
34.8
22.0
10.0
–1.2
.074
.109
.149
.181
.207
.233
.252
.267
.277
.280
.281
.273
.259
.239
.211
.176
.132
.085
.032
.083
.193
.291
.368
.433
114.0
96.5
83.7
73.9
65.2
57.7
50.8
43.5
36.7
30.0
23.6
17.1
9.9
3.0
–4.0
–11.9
–18.4
–25.8
–28.0
125.0
112.1
99.6
86.4
78.7
4
Product Options
UTO – 509R
Model Number Prefix
UTOUTMPPA-
Screening Option
Blank = No Screening
R = R-Series Screening
For more information on R-Series screening,
see Reliability Screening, Pub. 5963-3240E.
Model Number
UTC – 509-1
Model Number Prefix
UTCConnector Option
For TC-1 case the only connector option
available is the -1. The -1 option consists
of a SMA Female connector on both the
input and output (see note).
Model Number
Note: R-Series screening is not available in the TC-1 case as the case is non-hermetic.
Case Drawings
TO-8T
.300
TYP
.200
+.002
.017 - 001
.150
TYP
GROUND
RF OUT
3
GLASS RING
.060 DIA TYP
(3X)
2
.50
.450
DIA DIA MAX
4
.150
TYP
1
45
CASE
GROUND
.031
.031
0.185
±0.015
RF IN
V+
APPROXIMATE WEIGHT 2.1 GRAMS
NOTES (UNLESS OTHERWISE SPECIFIED):
1. DIMENSIONS ARE SPECIFIED IN INCHES
2. TOLERANCES:
xx ± .02
xxx ± .010
Case Drawings
TC-1
.820
1.000
RFOUT
RF IN
V+
.460
.890
PRODUCT MARKING
AREA
AGC (IF REQUIRED)
.38
(2) PL
.460
DC INPUT
.500
.350
.310
.890
.350
SMA JACK (FEMALE)
(2) PL
.310
.19
.100
GND
.24
.640
.180
.905
2-56 UNC-2B x .15 DEEP
THREADED INSERT
(4) PL
.250
.095
.570
TYPICAL WEIGHT WITH CONNECTORS = 21.5 GRAMS
NOTES: 1. THE TC-1 CASE IS A NON-HERMETIC CASE.
2. THE ONLY CONNECTOR OPTION AVAILABLE FOR THE TC-1 CASE IS THE –1, SMA FEMALE CONNECTORS AT BOTH INPUT AND OUTPUT PORTS.
NOTES (UNLESS OTHERWISE SPECIFIED):
1. DIMENSIONS ARE SPECIFIED IN INCHES
2. TOLERANCES:
xx ± .02
xxx ± .010
Contact Teledyne Microwave Solutions:
650-691-9800
650-962-6845 fax
Check for updates:
www.teledynemicrowave.com