P O W E R
T R A N S M I S S I O N
B E L T S
P R O D U C T S
A N D
S P R O C K E T S
DRIVE SOLUTIONS THAT DRIVE PERFORMANCE.
BLACKHAWK
®
®
0.120"
0.120"
0.120" 0.120"
0.120"
0.200"
0.200"
0.200" 0.200"
All belt sizes static conductive*
YELLOW
Sample Size: B1750
B – BLUE = 14mm PITCH
35mm WIDTH
1750 – 1750mm BELT LENGTH
BLUE
GREEN
WHITE
U.S. Patents: 5,209,705 and 5,421,789
ORANGE
RED
PURPLE
0.234"
0.234"
0.234" 0.234"
0.120"
0.180"
0.180"
0.180"
0.180"
0.180"
0.120"
0.120"
0.180"
0.180"
0.180"
0.375"
0.375"
0.375"
All belt sizes 0.375"
static0.200"
conductive*
0.375"
0.200"
0.200"
0.200"
0.234"
0.234"
0.234"
8mm
0.500"
0.500"
0.500" 0.500"
0.500"
0.234"
5.8mm
®
0.120"
0.120" 0.120"
0.120"
0.375"
0.375"
0.375"
0.120"
0.200"
0.200" 0.200"
0.200"
0.234"
0.234" 0.234"
0.234"
0.500"
0.500"
0.500"
14mm
9.8mm
®
17mm
8mm
YELLOW
Sample Size: 800 8M BH 35
800 – 800mm BELT LENGTH
8M – 8mm PITCH – UNIVERSAL TOOTH PROFILE
BH – BLACKHAWK Pd
35 – 35mm WIDE
®
8mm
WHITE
BLUE
65mm
SPROCKETS
14mm
POSITIVE DRIVE
Available in 13” Sleeve
MXL
XL
14
mm
GREEN
0.500"
0.500"
0.500"
14mm
L
H
XH
*
107mm
72mm
Static conductive*
Sample Size: Y-28S-SH
Y – MATCHES YELLOW BELTS
28 – NUMBER OF GROOVES
S – SPROCKET
SH – HUB TO MATCH SH BUSHING
8mm
PURPLE
ORANGE
16mm
RED
8mm
35mm
52.5mm
14mm
BLUE
25mm
5.3mm
14mm
GREEN
8.6mm
70mm
8mm
WHITE
32mm
14mm
RED
ORANGE
DUAL HI-PERFORMANCE
8mm
*
Sample Size: 800 8M 50
800 – 800mm BELT LENGTH
8M – 8mm PITCH – ROUND TOOTH PROFILE
50 – 50mm WIDE
5.3mm
Available in E Sections
product styles include ELATECH® M (Open
End), ELATECH® V (Jointed or Welded), iSYNC (cut to
width sleeves) and ELAflex SD™ (Truly Endless).
14mm
STD
SELF – TRACKING TK and ATK
FLAT BELT
§ELATECH
HY-T WEDGE
®
Static conductive*
Sample Size: 100S4.5M175
100 – 10mm WIDTH
S – SUPER TORQUE POSITIVE DRIVE BELT
4.5M – 4.5mm PITCH – MODIFIED ROUND TOOTH PROFILE
175 – 175mm BELT LENGTH
is a registered trademark of ELATECH S.r.l.
®
MATCHMAKER® SERIES
All belt sizes static conductive*
0.50"
TORQUE-FLEX
MATCHMAKER® SERIES
All belt sizes static conductive*
*
®
MATCHMAKER® SERIES
All belt sizes static conductive*
0.66"
0.41"
A
B
(side view)
1.25"
0.88"
0.53"
Sample Size: 5V1400
5V – 0.62” TOP WIDTH – NARROW PROFILE
1400 – 140.0” STANDARD EFFECTIVE LENGTH
0.75"
C
(Envelope uncogged construction shown)
D
®
3V / 3VX
5V / 5VX
8V
Sample Size: BX75
Manufactured in cut-edged molded cog and envelope cut cog construction in
3V and 5V profiles depending on length and drive requirements; envelope
non-cogged on all 8V’s.
HY-T WEDGE TORQUE TEAM
®
MATCHMAKER® SERIES
Cut-edge, molded cog
on all AX sizes,
BX up to 136”
CX up to 136”
All others are envelope
cut-cog construction.
B – 0.66” TOP WIDTH – CLASSICAL PROFILE
X – PREMIUM COGGED CONSTRUCTION
75 – APPROXIMATE 75” INSIDE LENGTH
(Cut-edge, molded cog construction shown)
®
MATCHMAKER® SERIES
AX
BX
TORQUE TEAM (LAMINATED)
®
All belt sizes static conductive*
All belt sizes static conductive*
CX
MATCHMAKER® SERIES
Commonly referred to as a “chip & saw” belt
Manufactured in
standard classical B, C
and D cross sections
with envelope
construction in
lengths over 136”.
(Envelope uncogged construction shown)
0.500"
†Various
0.31"
Sample Size: 3/BX112
3/ - 3 RIB JOINED CONSTRUCTION
B – 0.66” TOP WIDTH – CLASSICAL PROFILE RIB
X – PREMIUM COGGED CONSTRUCTION
112 – APPROXIMATE 112” INSIDE LENGTH
0.234"
SUPER TORQUE
®§
METRIC T, AT and ATL
XL, L, H and XH
HTD
HY-T TORQUE TEAM
H
Sample Size: D225L050
D – DUAL SIDED
225 – 22.5” BELT LENGTH
L – L PITCH – TRAPEZOIDAL TOOTH PROFILE
050 – 0.50” WIDE
ELATECH POLYURETHANE BELTS
®
8mm
®
*
L
PITCHES†
Sample Size: B75
B – 0.66” TOP WIDTH – CLASSICAL PROFILE
75 – APPROXIMATE 75” INSIDE LENGTH
0.375"
0.200"
8mm
14.6mm
®
L
0.180"
5.3mm
Sample Size: D1040 8M 20
D – DUAL SIDED
1040 – 1040mm BELT LENGTH
8M – 8mm PITCH – ROUND TOOTH PROFILE
20 – 20mm WIDE
HY-T PLUS
*
XL
0.120"
M
8.6mm
Static conductive*
*
50mm
8.6mm
XXH
DUAL POSITIVE DRIVE
®
5.3mm
8mm
8.6mm
105mm
14mm
Sample Size: 100XL025
100 – 10.0” BELT LENGTH
XL – PITCH – TRAPEZOIDAL TOOTH PROFILE
025 – 0.25” WIDE
HAWK
®
YELLOW
Sample Size: R14PU105STD
R – 14mm PITCH, 105mm WIDTH
PU – POLYURETHANE
STEEL CORD
STD – STANDARD CONSTRUCTION
Sample Size: GTR-22G-8M-12
GTR – FALCON SPROCKET
22G – 22 GROOVES/TEETH
8M – 8mm PITCH LENGTH
12 – MATCHES 12mm BELT
14
mm
U.S. Patents: 5,209,705 and 5,421,789
ACCULINEAR
*DRIVE CONDITIONS AND SERVICE VARIABLES IN COMBINATION WITH TIME IN OPERATION CAN RESULT IN LOSS OF STATIC CONDUCTIVITY. IT IS
RECOMMENDED THAT A CONDUCTIVITY CHECK BE ADDED TO DRIVE PREVENTATIVE MAINTENANCE PROGRAMS WHERE BELT STATIC CONDUCTIVITY IS A
REQUIREMENT. FOR MORE INFORMATION ON STATIC CONDUCTIVITY, VISIT US AT WWW.GOODYEAREP.COM/STATICCONDUCTIVE..
14
mm
(side view)
3VX, 5VX
5V, 8V
Sample Size: 5/8V1900
5/ – 5 RIB JOINED CONSTRUCTION
8V – 1.00” TOP WIDTH – NARROW PROFILE RIB
1900 – 190.0” STANDARD EFFECTIVE LENGTH
SINGLE ENVELOPE PLY ON 5V’S,
2 ENVELOPE PLIES ON 8V’S
(side view)
Manufactured in standard
classical BX and CX cross
sections with cut-edge,
cogged construction in
lengths 136” and under.
All belt sizes static conductive*
3VX, 5VX
Sample Size: 5/5VL800
5/ – 5 RIB JOINED CONSTRUCTION
5V – 0.62” TOP WIDTH - NARROW PROFILE RIB
L – LAMINATED CONSTRUCTION
800 – 80.0” STANDARD EFFECTIVE LENGTH
Manufactured in 3V, 5V and 8V cross sections with envelope construction in
lengths over 136” and cut-edge cogged, construction in lengths 136” and
under. Cogged belts are designated with 3VX and 5VX.
(Cut-edge, molded cog construction shown)
™
TORQUE TEAM PLUS
MATCHMAKER® SERIES
®
5VL
®
MATCHMAKER® SERIES
All belt sizes static conductive*
All belt sizes static conductive*
10mm
10mm
All belt sizes static conductive*
SOME SIZES AND BELT TYPES ARE NOT TO SCALE • ILLUSTRATIONS ARE REPRESENTATIVE OF THE
PRODUCT GROUP, AND MAY NOT REPRESENT ALL PRODUCTS AND VARIATIONS OF THE GROUP.
XPZ
3V / 3VX
5V / 5VX
5V, 8V
Sample Size: 5/8VF1900
5/ – 5 RIB JOINED CONSTRUCTION
5V – 0.62” TOP WIDTH – NARROW PROFILE RIB
F – TORQUE TEAM PLUS WITH FLEXTEN TENSILE MEMBER
1900 – 190.0” STANDARD EFFECTIVE LENGTH
SINGLE ENVELOPE PLY ON 5V’S, 2 ENVELOPE PLIES ON 8V’S
8V
Manufactured in 3V, 5V and 8V cross sections with a unique dual envelope
non-cogged construction.
(Envelope uncogged construction shown)
13mm
13mm
10mm
10mm
8mm
8mm
Sample Size: 3V950
3V – 0.38” TOP WIDTH – NARROW PROFILE
950 – 95.0” NOMINAL OUTISDE LENGTH
0.375"
0.375"
0.375"
10.7mm
54.5mm
37mm
0.234"
0.234"
0.234"
8mm
0.500"
0.500" 0.500"
0.500"
0.500"
0.234"
5.7mm
Sample Size: 8GTR-640-12
8GTR – 8mm PITCH
640 – 640mm BELT LENGTH
12 – 12mm WIDE
SPROCKETS
33mm
0.120"
0.180"
0.180"
0.180"
0.180"
0.180"
All
belt sizes static conductive*
0.120"
0.120"
0.180"
0.180"
0.180"
0.375"
0.375" 0.375"
0.375"
0.200"
0.375"
0.200"
0.200"
0.200"
XPA/SPA
22mm
22mm
Sample Size: XPA0707
X – PREMIUM COGGED CONSTRUCTION
PA – METRIC A PROFILE
0707 – 707mm DATUM LENGTH
XP INDICATES REMC CONSTUCTION
SP INDICATES ENVELOPE CONSTRUCTION
Raw-edge, molded cog
on all PZ sizes,
PA up to 3350
PB up to 3650
PC up to 3750
17mm
17mm
18mm
18mm
14mm
14mm
XPB/SPB
XPC/SPC
MATCHMAKER SERIES BELTS
®
ensure all belts of same size and type will measure within RMA matching limits.
®
BELT LENGTH CONVERSION
‡
Check belt type for measureme­­­­­nt method.
‡
SECTION
A, AX, 4L
B, BX, 5L
C, CX
D, DX
E
NOMINAL
TOP WIDTH
1/2”
21/32”
7/8”
1-1/4”
1-1/2”
(.500)
(.656)
(.875)
(1.250)
(1.500)
VARIABLE SPEED
FLEXTEN CLASSICAL
®
All belt sizes static conductive*
HOW TO OBTAIN INSIDE OR OUTSIDE LENGTH
UP TO 210” ADD OR SUBTRACT
OVER 210” ADD OR SUBTRACT
2.1” to/from Part Number 2.9” to/from Part Number
4.2” to/from Part Number 5.2” to/from Part Number 7.0” to/from Part Number 2.1” to/from Part Number
1.4” to/from Part Number
2.2” to/from Part Number
2.7” to/from ­Part Number
3.5” to/from Part Number
POLY-V
®
Cut-edge=Non-static conductive
J
A
Cut-edge construction
B
Sample Size: B47F 85500
B – 0.66” TOP WIDTH – CLASSICAL PROFILE
47 – APPROXIMATE 47” INSIDE LENGTH
F – FLEXTEN TENSILE MEMBER
85500 – LAWN & GARDEN EQUIVALENT PART NUMBER
C
OPEN END
180 – 18.0” NOMINAL OUTSIDE LENGTH
J – J SECTION POLY V
4 – 4 RIBS
*Check with Veyance for specific static conductivity details.
HEX
FHP
All belt sizes static conductive*
2L
A
3L
B
Sample Size: B OPEN END
B – 0.66” TOP WIDTH – CLASSICAL PROFILE
AVAILABLE ROLL LENGTHS 250’ AND 500’.
D – SECTION AVAILABLE ONLY IN 250’ ROLL LENGTHS
L
M
All belt sizes static conductive*
AA
BB
CC
CCP
BB – B SECTION DOUBLE – CLASSICAL PROFILE
0.66” CENTER WIDTH
75 – APPROXIMATE 75” INSIDE LENGTH
(Cut-edge, molded cog construction shown)
4L
5L
D
Veyance Technologies also offers a wide range of Goodyear Engineered Products brand bushings,
v-belt sheaves, synchronous belt sprockets, flat belt pulleys, flywheels,
and other metal power transmission products.
Job #: 11GPTP022
H
Sample Size: BB75
Sample Size: 4L560
4L – 0.50” TOP WIDTH
560 – 56.0” NOMINAL OUTSIDE LENGTH
C
K*
Static conductive*
Sample Size: 180J4
Sample Size: 3226V585
32 – 32/16” TOP WIDTH
26 – ANGLE OF SHEAVE GROOVE
V – VARIABLE SPEED PROFILE – WITH FLEXTEN TENSILE MEMBER
585 – 58.5 PITCH LENGTH
The GOODYEAR (and Winged Foot Design) trademark is used by Veyance Technologies, Inc. under license from The Goodyear Tire & Rubber Company. Goodyear Engineered
Products are manufactured and sourced exclusively by Veyance Technologies, Inc. or its affiliates. The following trademarks are licensed to Veyance Technologies, Inc.
by The Goodyear Tire & Rubber Company including Eagle Pd, Eagle NRG, GY Metric, and Flexten. ©2011 Veyance Technologies, Inc. All Rights Reserved.
700-821-947-461
Element: 2011 PTP Wall Chart - Small
Bleed:
.125”
Trim or Flat Size:
11.875” x14”
Live:
# of pages:
1
Colors:
4C
File Scale:
100%
Image Resolution:
300 dpi
Bindery:
v#: 1
Finished Size:
11.875” x14”
Notes:
1025463-09/11