Hendrickson ULTRA ROD® PLUS™ Two-piece Torque Rods
deliver all the benefits of the ULTRA ROD PLUS with added versatility by
featuring empty end hubs. These allow the perfect Hendrickson bushing
combination to be added for each application. The two-piece
ULTRA ROD PLUS design requires stocking only two part numbers,
eliminating large torque rod inventories. This can help
reduce part numbers and increase inventory turns.
■ The ULTRA ROD PLUS tube and spacer ends are
made out of a one-piece forging, eliminating the
standard end-hub assembly weld allowing for
greater structural integrity.
■ The 30" spacer end provides the ability to make any length torque rod
desired — just measure, cut, and weld. Refer to Hendrickson Assembly
Instructions Literature No. 59310-024, available online at www.hendrickson-intl.com.
Hendrickson Genuine Torque Rod Bushings — Whether the application is a lighter duty
on-highway truck or a severe vocational application,
Hendrickson offers the right bushings for the job.
XTRB™
BUSHINGS
XTRB Bushings used for severe duty applications,
are a combination of chemical bonding and a
mechanical design with a hardened steel
bar pin, steel casing, and bonded rubber.
BONDED
BUSHINGS
CONVENTIONAL
BUSHINGS
Bonded Bushings work great in a
vocational environment and are easy to
install with the funnel tool.
Conventional Bushings
press-in easily and provide
the durability needed for
medium applications.
Contact Hendrickson toll-free at 1-866-755-5968
SPACER END
TUBE END
SPACER END
TUBE END
Use the ULTRA ROD PLUS with any of the following Hendrickson bushings to achieve your desired torque rod configuration.
XTRB™ BUSHINGS
BONDED BUSHINGS*
CONVENTIONAL BUSHINGS
PART NO.
"A"
"B"
"C"
PART NO.
"A"
"B"
"C"
PART NO.
"A"
"B"
"C"
66649-002L
2¾"
43/8"
58
64400-002L
3¼"
43/8"
58
44695-000L
2¾"
43/8"
58
/"
/"
/"
66649-003L
2¾"
5¼"
7
/8"
64400-003L
3¼"
5¼"
7
/8"
NA
66649-005L
2¾"
43/8"
¾"
64400-005L
3¼"
43/8"
¾"
49210-000
2¾"
43/8"
¾"
66649-004L
2¾"
8"
3"
64400-004L
3¼"
8"
3"
44697-000L
2¾"
8"
3"
64400-006L
3¼"
8¾"
3"
NA
64400-007L
3¼"
7"
17/8"
46735-000L
2¾"
7"
17/8"
3¼"
58
6 /"
2¾"
58
6 /"
2"
64400-009L
3¼"
511/16"
¾"
46734-000L
2¾"
511/16"
¾"
64400-010L
3¼"
3¼"
11/8"
46736-000L
2¾"
3¼"
11/8"
64400-008L
2"
46737-000L
*Funnel Tool Part No. 66086-000 Re-bushing a torque rod with a bonded bushing is now easier with the use of a new funnel tool.
Contact your authorized Hendrickson distributor to order.
www.hendrickson-intl.com
Truck Systems Group
800 South Frontage Road
Woodridge, IL 60517-4904 USA
45745-272 Rev B 07-10
630.910.2800
Fax 630.910.2899
Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected.
© 2010 Hendrickson USA, L.L.C. (U.S. Rights) Hendrickson International Corporation (Rights Outside U.S.) All Rights Reserved
Printed in United States of America