EDGEWATER® 33 x 22 SINGLE BOWL
STAINLESS STEEL KITCHEN SINK
18 GAUGE STAINLESS STEEL
EDGEWATER® 33 x 22 SINGLE BOWL
STAINLESS STEEL KITCHEN SINK
❏ 18SB.9332211.075
•Fabricated Single Bowl Stainless Steel
kitchen sink
•18 Gauge Stainless Steel
•9" Deep Bowl
•Zero radius corners
•Dual mount (top or under) installation
•Single hole
•Side and bottom sound pads with full spray insulation
•36" (914mm) cabinet required
•Includes:
- 7434000.075 Bottom Grid - 9028000.075 Waste Fitting - 791637-100.0070A Top Mount Sink Clips - 791676-100.0070A Undermount Sink Clips
- Cutout template
- Installation Instructions
•Limited Lifetime Warranty
Nominal Dimensions:
33" x 22" x 9"
(838 x 559 x 229mm)
Bowl Size:
30-1/4" (768mm) wide
16-1/2" (420mm) front to back
9" (229mm) deep
SEE REVERSE FOR ROUGHING-IN
DIMENSIONS AND PRODUCT SPECIFICATIONS
Compliance Certifications - Meets or
Exceeds the Following Specifications:
• ASME A112.19.3
To Be Specified:
❏ Color: Stainless Steel .075 L23
© 2017 AS America Inc.
spec_18SB.9332211.075 Edgewater 33x22 SS Kitchen Sink 2/17
EDGEWATER® 33 x 22 SINGLE BOWL
STAINLESS STEEL KITCHEN SINK
18 GAUGE STAINLESS STEEL
9"
(229 mm)
33"
(838 mm)
30-1/4"
(768 mm)
16-1/2"
(419 mm)
4-1/6"
(103 mm)
2-9/16"
(65 mm)
Ø1-3/8"
(35mm)
8-3/4"
(223 mm)
Ø3-9/16"
(91 mm)
Ø4-13/16"
(122 mm)
16-1/2"
(420 mm)
22"
(559 mm)
REINFORCEMENT BAR FOR
TOP MOUNTING, 4 PLACES
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE SUGGESTED.
*FITTINGS
NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.3.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
L24
© 2017 AS America Inc.
spec_18SB.9332211.075 Edgewater 33x22 SS Kitchen Sink 2/17