Datasheet ● 802.3at PoE+ Injector
DATASHEET
Gigabit PoE Injector, 802.3at PoE+, with digital Input/Output
Reliable, standard-compliant power for PoE/PoE+ devices
Product Highlights





Gigabit compatible
Fully IEEE 802.3at standard compliant, IEEE 802.3af backward compatible
Power on/off PoE output via digital input
Monitor PoE device connected via digital output
Extreme wide input voltage range to support battery or solar power
The avisec PoE+ injector is a unique high power PoE injector with an
802.3af/at compatible output which can get controlled and monitored
via digital input/output.
Remote power on/off PoE output
The PoE output can get enabled/disabled trough a digital input. The
PoE+ injector can be extremely useful if used with 3G/4G mobile
router to remote control PoE output. The PoE output can easily get
enabled/disabled trough an SMS if connected to a digital output of a
3G/4G router. This feature offers unique options to:


Remote power on/off PoE device or to cold start PoE devices as required
Power on/off PoE device by schedule based on 3G/4G router cron table configured
Monitor PoE output
The PoE+ injector offers a unique feature to easily monitor PoE output. This feature signals if a PoE device
is connected. The PoE+ injector can be extremely useful if used with 3G/4G mobile router to remote
monitor PoE output. Simply receive an SMS if a PoE device gets connected/disconnected. This feature
offers easy troubleshooting or offers instant alarm if a PoE device gets connected/disconnected.
PoE+ injector for solar or battery powered solutions
The wide input voltage range from 5 to 36VDC makes this PoE injector extremely useful to power any
PoE/PoE+ device from a large variety of battery or solar powered systems.
© avisec ag ● Rugghölzli 2, 5453 Remetschwil, Switzerland ● +41 56 500 50 20 ● [email protected]
Datasheet ● 802.3at PoE+ Injector
Specification
Power
Physical dimension
Input voltage: 5 to 36 VDC or 48 to 56 VDC
Maximum input power: 30 W
Maximum output power: 25.5 W
Powered device can be up to 100m away from injector
Size: 120mm x 95mm x 38mm
Weight: 170g
Mounting
DIN mount
Data
Supports 10/100/1000Base-T, full duplex
Compatibility
Complies with IEEE 802.3af/at standard
Digital input/output
Input: pull to VDC/GND to disable PoE+ out
Output: VDC if PoE device connected, GND if no PoE
device connected
Environmental
Operating temperature: -40°C to 75°C
Storage temperature: -40°C to 75°C
Humidity: 5 to 90%, non-condensing
Additional features
Short-circuit protection
Regulatory
EU: EN550032, EN550024, CE
Warranty
2 years’ hardware warranty included
Package Contents
PoE+ Injector including DIN mount adapter
6-Pin connector
Ordering information
160347 Universal PoE+ Injector DIN mount
No liability or responsibility for any errors or missions in the content.
Specifications are subject to change without notice.
Copyright © avisec ag, Switzerland. All Rights Reserve
© avisec ag ● Rugghölzli 2, 5453 Remetschwil, Switzerland ● +41 56 500 50 20 ● [email protected]