HS10S
Reverse rinsing filter combination
with rotatable connector flange
Product specification sheet
Application
4
6
2
10
0
bar
15
5
r
ba
8
10
16
0
HS10S combination water supply units integrate a check valve
with test point, reverse rinsing fine filter, pressure reducing valve
and shutoff valve in one appliance. They ensure a continuous
supply of filtered water. The fine filter stops the ingress of foreign
bodies, for example rust particles, strands of hemp and grains of
sand. The check valve protects the mains water system against
back pressure, back flow and back syphonage of health threatening liquids. The pressure reducing valve prevents over-pressure
damage and reduces water consumption.
All individual units correspond to the requirements of current DIN/
DVGW specifications. Technical features of each unit also apply
to the combination assembly.
Special Features
•
DIN/DVGW-approved for connection sizes 11/2" and 2".
Requested for connection sizes 1/2" to 11/4"
•
Double Spin Technology for connection sizes 1/2" to 11/4"
•
Construction
EN0H-1101GE23 R0407 • Subject to change
The domestic water station comprises:
o Cartridge with external rotor enabling simultaneous
cleaning in lower and upper filter areas
o Visual function check possible
Especially compact because pressure reducing valve, fine
filter, check valve and shutoff valve are combined in one unit
•
Filtered water supplied even during reverse rinsing
•
Patented reverse rinsing system - fast and thorough cleaning
of the filter with small amount of water
•
Automatic reverse rinsing actuator with bayonet connector
can be retrofitted
•
Shock resistant clear synthetic material filter bowl enables
easy checking of filter contamination
•
Inlet pressure balancing - fluctuating inlet pressure does not
influence outlet pressure
Valve and filter inserts fully interchangeable
•
Housing with inlet and outlet pressure gauges
•
Check valve on inlet
•
Test point for check valve
•
Fine filter in clear filter bowl
•
Ball valve with drain connection
•
Spring bonnet with adjustment knob and setting scale
•
Valve insert complete with diaphragm and valve seat
•
•
Threaded or soldered union connections
•
Shutoff valve
Range of Application
•
Double ring wrench
Materials
Medium
Inlet pressure
Water
Maximum 16.0 bar with clear filter bowl
Maximum 25.0 bar with red-bronze filter bowl
1.5 - 6.0 bar
•
Dezincification resistant brass housing
Outlet pressure
•
Brass shutoff valve and connectors
•
High grade synthetic material check valve cartridge
The filter is constructed for drinking water installations. In case of
a process water application the filter has to be proven individually.
•
Stainless steel fine filter
Technical Data
•
Red-bronze or shock-resistant, clear synthetic material filter
bowl
•
High-quality synthetic material spring bonnet
•
High-quality synthetic material valve insert
•
Fibre-reinforced NBR diaphragm
Installation position
Operating temperature
Operating pressure
Connection size
•
NBR seals
Horizontal, with filter bowl downwards
Maximum 40 °C with clear filter bowl
Maximum 70 °C with red-bronze filter bowl
Minimum 1.5 bar
1/
2"
- 2"
www.honeywell.com
1
HS10S Reverse rinsing filter combination
Method of Operation
The combination water supply unit combines check valve,
reverse rinsing fine filter, pressure reducing valve and shutoff
valve in one appliance.
Water flows first through the check valve. This causes the valve
stem to push against the spring force and open the valve.
The downstream reverse rinsing fine filter holds back any dirt
particles in the water. These particles are then completely flushed
out by reverse rinsing.
Filters with Double Spin Technology have turbine blades which
circulate the water and thereby set the rotor on the upper filter
into a rotational motion. The internal impeller rinses off particles
that have adhered to the upper filter at the intersecting points
with the rotor.
The integral pressure reducing valve functions on a balanced
force principle whereby the force exerted by a diaphragm is
balanced against the force of an adjustment spring. The inlet
pressure has no influence on opening or closing of the valve. Inlet
pressure fluctuation does not therefore affect the outlet pressure.
Options
HS10S-...AA =
Threaded male connections filter mesh size
100 µm
HS10S-...AAM = Red-bronze filter bowl, Threaded male
connections filter mesh size 100 µm
Connection size
Connection size
Nominal size
diameter
Weight
Dimensions
kvs-value
DIN/DVGW Approval No.
Double Spin Technologie
R
DN
1/ "
2
3/
20
1"
25
11/4"
32
11/2"
40
15
2"
50
kg
mm
L
l
H
h
D
4.0
4.1
5.7
6.3
8.1
10
255
110
439
350
97
2.7
268
110
439
350
97
3.2
305
130
493
353
97
7.6
327
130
493
353
97
8.9
Yes
Yes
370
408
150
150
590
590
417
417
120
120
12.6
13.0
DW-9321 AT 2381
No
No
4"
requested
Yes
Yes
Accessories
Z11S
Automatic reverse rinsing actuator
For automatic filter cleaning at presettable intervals
AF11S
Filter insert complete
Available with filter meshes 20 µm, 50 µm, 100 µm,
200 µm, 300 µm, 500 µm
AF11DS Filter insert complete
AF11S
Z11S
2
www.honeywell.com
AF11DS
Available with filter meshes 100 µm, for filters with
Double Spin Technology
EN0H-1101GE23 R0407 • Subject to change
Filters with other mesh widths available on request
HS10S Reverse rinsing filter combination
Installation Example
Installation Guidelines
Typical Applications
•
Install in horizontal pipework with filter bowl downwards
•
o This position ensures optimum filter efficiency
Install shutoff valves
•
Ensure good access
•
o Pressure gauge can be read off easily
o Degree of contamination can be easily seen with clear filter
bowl
o Simplifies maintenance and inspection
The installation location should be protected against frost
Combination water supply units of this type can be fitted
wherever check valves, filters, pressure reducing valves and
water distributor units are required. They are particularly suitable
for all types of household applications to comply with standards
and for industrial and commercial use within the limits of their
specifications.
•
Fit immediately after water meter
o Corresponds to DIN 1988, Part 2
Combination water supply units of this type are installed:
•
To comply with standards and where space is limited, for
example in modernisation of old buildings
•
Where there is existing metal or plastics pipework
•
For protection against noise when the static pressure at take
off points exceeds 5.0 bar (DIN 4109)
•
If the static pressure exceeds the maximum permissible
operating pressure of an installation
•
If pressure fluctuations in the downstream system must be
avoided
•
If the downstream system includes appliances which must be
protected against dirt
EN0H-1101GE23 R0407 • Subject to change
Flow Diagram
www.honeywell.com
3
HS10S Reverse rinsing filter combination
Spare Parts
HS10S Filter Combinations (from 2007 onwards)
1
No. Description
6
3
14
Part No.
1/
0901515
0901517
0901518
1
Spring bonnet completet
(with setting scale)
3
2" + /4"
1
1" + 1 /4"
11/2" + 2"
2
Valve insert complete
(without filter)
1/
2"
+ 3/4"
1" + 11/4"
11/2" + 2"
D06FA-1/2
D06FA-1A
D06FA-11/2
3
Seal ring set
(Pack of 10)
1/
2"
0901444
0901445
0901446
0901447
0901448
4
Check valve
cartridge
2
4
Dimension
+ 3/4"
1"
11/4"
11/2"
2"
1/
3/
2"
4"
1"
11/4"
11/2"
2"
5
8
7
5
Test valve
6
Pressure gauge (0-10 bar)
Pressure gauge (0-16 bar)
Pressure gauge (0-25 bar)
7
Filter insert complete
Filter mesh 100 µm
without Double Spin
Technology
8
Filter insert complete for
filters with Double Spin
Technology
9
Clear filter bowl
11
2421100
M38K-A10
M38K-A16
M38K-A25
1/
- 3/4"
1" - 11/4"
11/2" - 2"
AF11S-1/2A
AF11S-1A
AF11S-11/2A
1/
AF11DS-1/2A
AF11DS-1A
2"
2"
1"
- 3/4"
1/
1
2" - 1 /4"
1
1 /2" - 2"
KF11S-1A
KF11S-11/2A
10 Red-bronze filter bowl
1/
1
2" - 1 /4"
11/2" - 2"
FT09RS-1A
FT09RS-11/2A
11 O-ring set
(Pack of 10)
1/
0900747
0900748
12 Drain connector
1/ "
2
- 2"
AA76-1/2A
13 Ball valve complete
1/ "
2
- 2"
KH11S-1A
14 Shutoff valve
1/
9
1
2" - 1 /4"
11/2" - 2"
3/
2"
4"
1"
11/4"
11/2"
2"
1/ " - 3/ "
15 Double ring wrench
2
4
for removing filter bowl
1" - 11/4"
and spring bonnet (no fig.) 11/2" - 2"
12
Automation and Control Solutions
Honeywell GmbH
Hardhofweg
D-74821 Mosbach
Phone: (49) 6261 810
Fax: (49) 6261 81309
http://europe.hbc.honeywell.com
www.honeywell.com
- 2"
Filter mesh 100 µm
with Double Spin
Technologie
13
1/ "
2
2166200
2110200
2164400
2164500
2164600
2164700
Manufactured for and on behalf of the
Environmental and Combustion Controls Division
of Honeywell Technologies Sàrl, Ecublens, Route
du Bois 37, Switzerland by its Authorised Representative Honeywell GmbH
EN0H-1101GE23 R0407
Subject to change without notice
© 2007 Honeywell GmbH
2192900
2193100
2193200
2193300
2193400
2193500
ZR10K-3/4
ZR10K-1
ZR10K-11/2