MO500
Design
Mads Odgård
Concept
The fixture emits light directed primarily downwards. The opal shade is faintly illuminated, to mark out the route and make the fixture distinct against the night sky.
The downward light pattern is determined by the reflector type.
Finish
Aluminium coloured with textured surface, powder coated.
Material
Shade: Opal, high pressure moulded acrylic. Reflector: High pressure moulded polycarbonate. Housing: Die cast aluminium. Diffuser: Clear, high pressure moulded
acrylic.
Mounting
Top mounted on arm: for 3/4” pipe thread min 25mm, 9,5m cable. Top wire mounted variant: no cable, but approved for looping, max. 3x1,5mm² via an IP68
connector. Driver position: in the fixture head.
Weight
Max. 18.3 Lb
Label
cULus, wet location, IBEW
Product Code
Light source
Voltage
Finish
Electric shock protection cl.
Distribution/Trim
Reflector/Optics
Transition to pole
Features
MO-500-PT
54W LED/3000K
120-277V
NAT PAINT ALU
NOT APPLICABLE
T2
MATTE
DRA-DAV-TE/RSA-SRA-TE
DIM 0-10V
SURGE PROTECTOR
T3
POLISHED
54W LED/4000K
Specification notes
a. T2 distribution is only available with MATTE reflector.
MO500
PRODUCT SPECIFICATION
MO500 Post BI-SYM (T2)
Product description
Design
Mads Odgård
Concept
The fixture emits light directed primarily downwards. The opal shade is faintly illuminated, to mark out the route and make the
fixture distinct against the night sky. The downward light pattern is determined by the reflector type.
Finish
Aluminium coloured with textured surface, powder coated.
Material
Shade: Opal, high pressure moulded acrylic. Reflector: High pressure moulded polycarbonate. Housing: Die cast aluminium.
Diffuser: Clear, high pressure moulded acrylic.
M o u n t i n g Top mounted on arm: for 3/4” pipe thread min 25mm, 9,5m cable. Top wire mounted variant: no cable, but approved for
looping, max. 3x1,5mm² via an IP68 connector. Driver position: in the fixture head.
Weight
Max. 18.3 Lb
Label
cULus, wet location, IBEW
Product Code Light source
MO-500-PT
Distribution/Trim Reflector/Optics
Transition to pole
54W LED/3000K 120-277V NAT PAINT ALU NOT APPLICABLE
Voltage
Finish
Electric shock protect.
T2
MATTE
DRA-DAV-TE/RSA-SRA-TE DIM 0-10V
54W LED/4000K
T3
POLISHED
SURGE PROTECTOR
Features
S p e c i f i c a ti o n n o t e s
a. T2 distribution is only available with MATTE reflector.
1/3 yu
Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
MO500
MO500 Post BI-SYM (T2)
PRODUCT SPECIFICATION
Material description
2/3
Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
MO500
MO500 Post BI-SYM (T2)
PRODUCT SPECIFICATION
Light Measurements
3/3
Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
MO500
PRODUCT SPECIFICATION
MO500 Post ASYM (T3)
Product description
Design
Mads Odgård
Concept
The fixture emits light directed primarily downwards. The opal shade is faintly illuminated, to mark out the route and make the
fixture distinct against the night sky. The downward light pattern is determined by the reflector type.
Finish
Aluminium coloured with textured surface, powder coated.
Material
Shade: Opal, high pressure moulded acrylic. Reflector: High pressure moulded polycarbonate. Housing: Die cast aluminium.
Diffuser: Clear, high pressure moulded acrylic.
M o u n t i n g Top mounted on arm: for 3/4” pipe thread min 25mm, 9,5m cable. Top wire mounted variant: no cable, but approved for
looping, max. 3x1,5mm² via an IP68 connector. Driver position: in the fixture head.
Weight
Max. 18.3 Lb
Label
cULus, wet location, IBEW
Product Code Light source
MO-500-PT
Distribution/Trim Reflector/Optics
Transition to pole
54W LED/3000K 120-277V NAT PAINT ALU NOT APPLICABLE
Voltage
Finish
Electric shock protect.
T2
MATTE
DRA-DAV-TE/RSA-SRA-TE DIM 0-10V
54W LED/4000K
T3
POLISHED
SURGE PROTECTOR
Features
S p e c i f i c a ti o n n o t e s
a. T2 distribution is only available with MATTE reflector.
1/3 yu
Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
MO500
MO500 Post ASYM (T3)
PRODUCT SPECIFICATION
Material description
2/3
Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
MO500
MO500 Post ASYM (T3)
PRODUCT SPECIFICATION
Light Measurements
3/3
Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
MO 500 Bisymmetric Cable/top mounting
Design Mads Odgård
60065-I1
13.9”
9.8”
8.5”
19.7”
Light source
Voltage
Weight
Electric shock protection
Ingress protection
LED
Max 120-277V
18.3 Lbs
Cl. I
IP 66, wet location
Recommended cleaning substances:
Wipe off dust with a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122° F/ 50° C) with a mild detergent.
Warning: Scouring powder and similar substances will scratch surfaces.
All installation is subject to local code and jurisdiction. Consult a qualified electrician to
ensure correct branch circuit conductor.
Louis Poulsen Lighting A/S • Gammel Strand 28 • 1202 Copenhagen K • Denmark • Tel. +45 70 33 14 14 • Fax 33 29 86 69 • [email protected] • www.louispoulsen.com
60065-I1
*
> 25 mm
*
1
PTFE-tape
2
G 3/4”
BSPP
(DIN ISO 228)
For dimming wires use
class 1 wiring methods.
Cap dimming wires
(separately) if not used
*
DIMMING CONTROL
L
N
SELV
+
-
L
N
+ -
Grey - (0-10V Dim-)
Violet + (0-10V Dim +)
Refer to the instructions
included with the Cable
Hanger for mounting and
wiring instructions
x5
Green (Ground)
Black (Line)
White (Neutral)
MO 500 Asymmetric Cablehanger mounting
Design Mads Odgård
X60065-I2
13.9”
9.8”
8.5”
19.7”
Light source
Voltage
Weight
Electric shock protection
Ingress protection
LED
Max 120-277V
18.3 Lbs
Cl. I
IP 66, wet location
Recommended cleaning substances:
Wipe off dust with a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122° F/ 50° C) with a mild detergent.
Warning: Scouring powder and similar substances will scratch surfaces.
All installation is subject to local code and jurisdiction. Consult a qualified electrician to
ensure correct branch circuit conductor.
Louis Poulsen Lighting · 3260 Meridian Parkway · Fort Lauderdale, Florida · 33331 954-349-2525 · www.louispoulsen.com
60065-I2
*
> 25 mm
*
1
PTFE-tape
2
G 3/4”
BSPP
(DIN ISO 228)
For dimming wires use
class 1 wiring methods.
Cap dimming wires
(separately) if not used
*
DIMMING CONTROL
L
N
+
-
L
N
+ -
Grey - (0-10V Dim-)
SELV
Violet + (0-10V Dim +)
Refer to the instructions
included with the Cable
Hanger for mounting and
wiring instructions
x5
Green (Ground)
Black (Line)
White (Neutral)
Position 1
Position 6
2
1
2
2