Agilent 5973, 5975, and 5977 Series GC/MSD
Supplies
Quick reference guide
Agilent supplies for Agilent
instruments
Agilent Technologies is committed to optimizing your
laboratory’s productivity, so we have produced this list of the
most commonly ordered supplies and parts for the 5973, 5975
and 5977 Series GC/MSD. Keep this list handy so you can
quickly find the supplies you need and minimize instrument
downtime. Electron impact ion
source supplies
5977 Ion source assembly
350 CI Ion source assembly
Ion source box
Ion source body
Draw out plate, 3 mm
Draw out plate, 6 mm
Draw out plate, 9 mm
Insulator, extraction lens ring
Draw out cylinder
Ion focus lens
Lens insulator
Entrance lens
Cap screw, gold-plated
High temperature filament,
1/pk
Transfer line socket
Repeller insulator
Repeller
EI Extractor transfer tip
Spring, Xfer
Wire, extraction lens
Jumper, extraction body
Screw set, M3x3L, gold plated
Stainless Inert Part Extractor
Source
No.
Source
Part No.
Part No.
(5977
only)
G3870-67750
G3870-67404
G1999-65001
G1099-20130
05971-20134
G3136-20530
G3870-67700 G3870-67720
G1072-20008
05971-20143
G3170-20530
G3170-20126
G3870-20021
G7005-60061
G1072-20008
05971-20143
G3170-20530
G3170-20126
G3870-20021
G7005-60061
G1999-65001
G2589-20043
G2589-20100
G2589-20045
G3440-20022
G1999-65001
G3870-20440
G3870-20444
G3870-20448
G3870-20449
G3870-20445
05971-20143
G3870-20530
G3170-20126
G3870-20021
G7005-60061
G1099-20136 G1099-20136
G1099-20133 G1099-20133 G1099-20133
G1099-20132 G2589-20044 G2589-20044
G3870-20542
G7005-20024
G7000-60827
G3870-60827
G1999-20022 G1999-20022 G3870-20446
Having trouble selecting the appropriate aperture diameters for the Agilent
5977A Series Ion Sources? Download publication number 5991-2106EN
from the Agilent Library agilent.com/chem/library
Chemical ionization ion source supplies
Part No.
MSD filaments
Part No.
Source body
Draw out plate
Draw out cylinder
Ion focus lens
Lens insulator
Entrance lens
Repeller insulator
Repeller
High temperature filament, 2/pk
Cap screw, gold-plated
Interface tip seal/spring
5977, 5975 and 5973 Series GC/MSD
Filament assembly (EI), 1/pk
Filament assembly (CI), 2/pk
G1999-20430
G1999-20446
G1999-20444
G1999-20443
G3170-20540
G3170-20126
G1999-20433
G1999-20432
G7005-60072
G1099-20021
G1999-60412
G7005-60061
G7005-60072
MS interface connections
Recommended
Column nut, self tightening MSD
Ferrule, 0.4 mm VG 0.1 - 0.25 col 10/pk
Ferrule, 0.5 mm VG 0.32 col 10/pk
Traditional using brass nut
Column nut for MS interface
Ferrule, 0.4 mm VG cond 0.32 col lng 10/pk
Ferrule, 0.5 mm VG cond 0.32 col lng 10/pk
Flexible metal ferrule
Swaging nut, Ultimate Union and QuickSwap
Ferrule, flexi inert 0.25 mm col 10/pk
Ferrule, flexi inert 0.32 mm col 10/pk
Ferrule pre-swage tool, capillary flow
Tools
Column installation tool for 5973/5975/5977
5975T Column insertion tool
Part No.
Inlet connections
Recommended
Column nut, self tightening inlet/detect
Ferrule, 0.4 mm VG 0.1 - 0.25 col 10/pk
Ferrule, 0.5 mm VG 0.32 col 10/pk
Flexible metal ferrule/Inert Flow Path
Column nut for long ferrule
Ferrule, flexi inert 0.25 mm col 10/pk
Ferrule, flexi inert 0.32 mm col 10/pk
Traditional
Universal column nut, 2/pk
Ferrule, 0.4 mm VG 0.1 - 0.25 col 10/pk
Ferrule, 0.5 mm VG 0.32 col 10/pk
Tools
Column install pre-swaging tool, graphite ferrules
Column install pre-swaging tool, metal ferrules
5190-5233
5181-3323
5062-3514
05988-20066
5062-3508
5062-3506
G2855-20555
G3188-27501
G3188-27502
G2855-60200
G1099-20030
G3880-20030
Electron multipliers and replacement horn
QuickSwap MS interface restrictors
QuickSwap restrictor, 0.092 mm id, 4/pk
QuickSwap restrictor, 0.100 mm id, 4/pk
QuickSwap restrictor, 0.110 mm id, 4/pk
QuickSwap restrictor, 0.120 mm id, 4/pk
QuickSwap restrictor variety pack, 2 of each of the above id
restrictors
5977 and 5975 Series GC/MSD
Triple axis detector assembly*
Triple axis electron multiplier
EM signal wire, low noise detector
5975 and 5973 Series GC/MSD
Electron multiplier replacement horn. Use with electron
multipliers with ‘straight’ horns
High energy dynode
Part No.
G3185-60361
G3185-60362
G3185-60363
G3185-60364
G3185-60300
* Included on 5975 triple axis detector systems
Having trouble identifying the key MS parts you need?
Try the Parts Finder selection tool today:
agilent.com/chem/PartsFinder
2
Part No.
5190-6194
5181-3323
5062-3514
05921-21170
G3188-27501
G3188-27502
5181-8830
5181-3323
5062-3514
G3440-80218
G3440-80217
Part No.
G3170-80105
G3170-80103
G3170-80008
05971-80103
G1099-80001
Pump supplies
Quiet Cover for GC/MS, for Agilent DS42, DS42i, Edwards
E2M1.5, and Pfieffer Duo 2.5 vacuum pumps
Foreline pump oil, Inland 45, 1 QT
High vacuum grease, 25 g
Diffusion pump fluid, 18.5 mL*
IDP Series tip seal kit for 5975T
Oil-mist filter for RV5 pump
Oil mist eliminator 3/4G and 3/8, for DS42 or DS42i
*
Tools
Part No.
Screwdriver, 3 in Pozidriv shaft No. 1 pt, fits No. 2-4 screws
Screwdriver, 4 in Pozidriv shaft No. 2 pt, fits No. 5-10
screws
Open end wrench, 1/4 and 5/16 in
Hex nut driver, 5.5 mm
Screwdriver, Torx T20
Screwdriver, Torx T15
Screwdriver, Torx T10
Tool-hand M5, for plug removal of the foreline pump
8 mm Hex key for DS42
Wrench, open end 10 mm
G6014A
6040-0834
6040-0289
6040-0809
IDP3TS
G6600-80043
SR03706556
Two required for 5977, 5975 and 5973 Series GC/MSD
Gas Clean filters
Replacement Gas Clean Carrier Gas filter
Gas Clean Carrier Gas Kit for 7890, includes Carrier Gas
filter, 1/8 in single connecting unit with bracket that installs
directly on the 7890
GC/MS filter kit. Includes: 1 connecting unit 1/8 in and 2
GC/MS filters
Chemical ionization gas purifier
Ion vacuum gauges
5977 Series
Ion vacuum gauge
5975 Series GC/MSD
Micro ion vacuum gauge
5975T LTM GC/MS
Ion gauge controller
Ion gauge tube
5973 Series GC/MSD
Ion gauge controller for 5973A
Triode gauge tube for measuring vacuum
Part No.
8710-0899
8710-0900
8710-0510
8710-1220
8710-1615
8710-1622
5182-3466
8710-1838
8710-2326
8710-2353
Part No.
CP17973
CP17988
Cleaning and maintenance supplies
Nylon gloves, lint-free, large, one pair
Nylon gloves, lint-free, small, one pair
Lint-free industrial wipes, 100% cotton 9 x 9 in, 300/pk
Ion source cleaning kit. Includes: lint-free cloths (15/pk),
abrasive sheets (5/pk), cotton swabs (100/pk), lint-free
nylon gloves, alumina powder, abrasive
Cloths, lint-free, 15/pk
Cotton swabs, 100/pk
Abrasive sheets, aluminium oxide green lapping paper, 600
mesh, 5/pk
Aluminum oxide powder, 100 g
GC/MS PFTBA 1 mL standard
PFTBA sample, certified, 10 g, 5.32 mL
PFDTD calibrant, 1 mL
PFHT- HighMass checkout sample
Replacement glass bulb for PFTBA and PFDTD test sample
Replacement glass vial for PFTBA and PFDTD test sample
MSD tool kit. Includes: source hold tool, lint-free cloth,
cotton swabs, lint-free nylon gloves, abrasive sheets,
wrenches, driving tools
CP17977
G1999-80410
Part No.
G3870-80030
G3170-80001
G3880-80010
G3880-80011
59864B
0960-0897
Quickly and easily find the right GC columns, filters
and vials for your application.
Try our selection tools:
agilent.com/chem/FindItNow
3
Part No.
8650-0030
8650-0029
9310-4828
5181-8863
05980-60051
5080-5400
5061-5896
393706201
05971-60571
8500-0656
8500-8510
5188-5357
G3170-80002
05980-20018
G1099-60566
Agilent Inert Flow Path solutions
Ensure a reliably inert GC flow path for higher sensitivity, accuracy, and reproducibility…especially at trace levels.
Flow path inertness is vital to your analysis; it is also on the cutting edge of GC. As the GC industry’s premier
measurement company, Agilent is uniquely positioned to ensure the inertness of every surface that touches your
sample, so you can achieve the parts-per-billion – or parts-per-trillion – detection levels that today’s analyses
demand.
By minimizing activity along every step of the GC and GC/MS flow path, Agilent Inert Flow Path solutions
improve system performance, ensure better results, and allow you to process more samples without unplanned
maintenance and recalibration.
To learn how to ensure your flow path is optimized for inertness, visit
www.agilent.com/chem/inert
This information is subject to change without notice.
© Agilent Technologies, Inc. 2014
Published in UK, April 22, 2014
5990-8819EN