Cat
®
TL943C
Telehandler
Specifications
Engine
Model
Gross Power (Basic)
Maximum Torque (Standard)
Bore
Stroke
Displacement
Boom Performance
Cat C3.4B Tier 4 Interim
83 kW
111.3 hp
450 Nm at 1400 rpm 332 lb-ft
99 mm
3.9 in
110 mm
4.3 in
3.4 L
207 .5 cu in
®
Weights
Operating Weight
12 032 kg
26,525 lb
Operating Specifications
Rated Load Capacity
Maximum Lift Height
Maximum Forward Reach
Frame Leveling
Top Travel Speed
Capacity at Max Height
Capacity at Max Reach
Turning Radius over Tires
Drawbar Pull (Loaded)
Boom Up
Boom Down
Tele In
Tele Out
Axles
• Trunnion mounted planetary 55 degree steer axles.
• Integral steer cylinder.
• High bias limited slip differential on front axle.
Brakes
4082 kg
13.1 m
9.6 m
10°
32.7 kph
3175 kg
544 kg
3.7 m
115.7 kN
9,000 lb
43 ft
31.5 ft
20.3 mph
7,000 lb
1,200 lb
12 ft
26,000 lb
• Service Brakes are inboard wet disc brakes on front and rear axles.
• Parking Brakes are spring-applied hydraulic release on front axle.
Light on dash indicates when brake is on.
Work Tools
Hydraulic
IT Coupler
Pallet Forks
Hydraulic System
Variable displacement load sensing axial piston pump
System Operating Pressure
276 bar
4,000 psi
Auxiliary Hydraulic Pressure
207 bar
3,000 psi
Auxiliary Hydraulic Flow
38 L/min
10 gal/min
at Boom Head
• Auxiliary Hydraulic Circuit used for all attachments equipped
with cylinders or other hydraulic components. Consists of valves,
controls and hydraulic lines.
Service Refill Capacities
Fuel Tank
Hydraulic System
144 L
157 L
38 gal
41.5 gal
Tires
Standard
Optional
370/75-28 Duraforce MT
370/75-28 Foam Filled
13.00 x 24 Foam Filled
13.00 x 24 12 PR
Transmission Speeds
Forward
Reverse
13.9 Seconds
10.2 Seconds
16.8 Seconds
14.9 Seconds
4 speed
3 speed
Lumber Forks
Cubing Forks
Carriages:
Standard Tilt
Wide Tilt
Side Shift
Standard Rotate
Wide Rotate
Swing
Dual Fork
Positioning
Includes
Auxiliary Electrics
(2) 1525 mm,
60 mm x 150 mm
(2) 1220 mm,
60 mm x 100 mm
(2) 1220 mm,
60 mm x 125 mm
(2) 1525 mm,
45 mm x 180 mm
(2) 1829 mm,
50 mm x 150 mm
(2) 1220 mm,
50 mm x 50 mm
Includes
Auxiliary Electrics
(2) 60 in, 2.36 in x 6 in
(2) 48 in, 2.36 in x 4 in
(2) 48 in, 2.36 in x 5 in
(2) 60 in, 1.75 in x 7 in
(2) 72 in, 2 in x 6 in
(2) 48 in, 2 in x 2 in
1270 mm
1829 mm
1220 mm
1270 mm
1829 mm
100°, 1829 mm, 4028 kg
Capacity, 2268 kg Swung
50 in
72 in
48 in
50 in
72 in
100°, 72 in, 9,000 lb
Capacity, 5,000 lb Swung
1270 mm
50 in
TL943C Telehandler
Dimensions
2.43 m (95.5 in)
All dimensions are approximate.
483 mm (19 in)
3.35 m (132 in)
2.42 m (95.3 in)
6.25 m (246 in)
Load Chart and Dimensions
14.6 m (48 ft)
14.6 m (48 ft)
IMPORTANT
13.4 m Rated
(44 ft) lift capacities shown are with machine
69° F
E
D
C
0 m (0 ft)
-1.2 m (-4 ft)
0°
4082 kg (9,000 lb)
50 60 70 80
DO NOT tip the machine forward to determine
the allowable20°
load.
4.9 m (16 ft)
Use only approved attachments with
3175 kg (7,000 lb)
4082 kg (9,000 lb)
3.7 m proper
(12 ft) material handler model/attachment
load capacity charts displayed in the
operator’s10°
cab. OSHA requires all rough
terrain forklift operators be trained
according to OSHA 29 CFR 1910.178 (1).
70 80
2.4 m (8 ft)
50 60
3175 kg (7,000 lb)
2267 kg (5,000 lb)
1814 kg (4,000 lb)
1360 kg (3,000 lb)
907 kg (2,000 lb)
1.2 m (4 ft)
544 kg (1,200 lb)
10°
6.1 m (20 ft)
40
3
TL94
2.4 m (8 ft)
20 30
3.7 m (12 ft)
D
will result.
A
10
4.9 m (16 ft)
20°
E
7.3 m unstable
(24 ft)
30°
and dangerous
machine conditions
-10
6.1 m (20 ft)
F
DO NOT exceed rated lift capacity loads, as
B
30°
7.3 m (24 ft)
2267 kg (5,000 lb)
40°
8.5 m (28 ft)
1814 kg (4,000 lb)
9.7 m (32 ft)
1360 kg (3,000 lb)
50°
10.9 m (36 ft)
-10
10
TL943
40
20 30
-6°
-2.4 m (-8 ft)
10.9 m 9.7 m 8.5 m 7.3 m 6.1 m 4.9 m 3.7 m 2.4 m 1.2 m 0 m
(36 ft) (32 ft) (28 ft) (24 ft) (20 ft) (16 ft) (12 ft) (8 ft) (4 ft) (0 ft)
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
©2012 Caterpillar
All rights reserved.
Printed in U.S.A.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
907 kg (2,000 lb)
60°
12.1 m (40 ft)
69°
equipped with carriage and pallet forks. The
must be level on a firm surface60°
with
12.1 m machine
(40 ft)
undamaged, properly inflated tires. Machine
and stability are 50°
based on rated
10.9 m specifications
(36 ft)
lift capacities at specific boom angles and
9.7 m boom
(32 ft) lengths. (If specifications are critical,
the proposed application
should be discussed
40°
8.5 m with
(28 ft)your dealer.)
544 kg (1,200 lb)
13.4 m (44 ft)
1.2 m (4 ft)
0 m (0 ft)
0°
Due to continuous product improvements,
machine specifications
and/or equipment
-6°
-1.2 mchanges
(-4 ft)
may be made without prior
notification. This machine meets or exceeds
-2.4 mANSI/ITSDF
(-8 ft)
B56.6-2005 as originally
10.9 m 9.7 mfor8.5
m 7.3 mapplications.
6.1 m 4.9 m 3.7 m
manufactured
intended
(36 ft) (32 ft) (28 ft) (24 ft) (20 ft) (16 ft) (12 ft)
2.4 m 1.2 m 0
(8 ft) (4 ft) (0
AEHQ6747-00 (03-2012)