0.75” (3/4-inch) Threshold Profile
1.00”
Floor
Flange
2.50” Enhanced
Contouring Area
Drip
Ledge
0.75” 0.5625” Apron Face
Exterior
Standard Slope
To Drain Outlet
Enhanced Slope
From Drip Ledge
Threshold Profile
0.1875” Floor Flange
Enhanced Entry Area Contouring
(Contouring limits water migration without
supplemental dam components)
Textured Shower Surface,
Sloping To Drain Outlet.
Front Drip Ledge
Site Applied Room
Side Floor Finish
Shower Stall Rests
On Sub-Floor
Underlayment (Sub Floor) Build-Up
(Subject to compliance with
regulations associated with
site installation requirements)
®
Oasis Lifestyle, LLC
1400 Pidco Drive
Plymouth, Indiana 47563
NOTE: A continuous (non-expanding)
void filling material is recommended
between floor and stall structure to
create a void-free installation.
0.625” Front
Apron Face
Full-Width Floor Flange
(Attachment limits threshold
distortion associated with
minimal threshold shower stalls)
Dwg. Title: 3/4-inch Contoured Threshold
Dwg. No: OTI-105.00
Dwg. Version: v 01.00
Description: 0.75” (3/4”) threshold incorporating
drip ledge, enhanced surface countouring and
floor flange in a minimal dam (threshold) design.
Dwg. Date: 02/06/11
Revision Date:
Dwg By: Smith
Revised By:
Implemented: 04/22/11
Sheet: 1 of 1