Card holder
RE 29928/12.08
Replaces: 11.08
1/4
Type VT 3002
Component series 2X
H/A/D4842
Table of contents
Features:
Content
Page
Ordering code
1
Features
1
Technical data
2
Notes on installation
2
Unit dimensions
3, 4
– The card holder allows for simple installation and wiring of
individual electronics cards in Euro-card format , e.g. in control
cabinets
– Screwable or snappable to hat rail
– With additional adapter (included in scope of supply) which
can be mounted vertically on a hat rail
– Rugged base
– Card locking and releasing by lever actuation
– Connection via screw terminals
Ordering code
VT 3002
Card holder
2X
*
Further details in the clear text
= VT 3002
Single Euro-format
Double Euro-format (only in version 32D)
=1
=2
Component series 20 to 29
= 2X
(20 to 29: Unchanged mounting and connection dimensions)
15H =
32D =
32F =
48F =
64G =
15-pin socket connector, form H
32-pin socket connector, form D
32-pin socket connector, form F
48-pin socket connector, form F
64-pin socket connector, form G
2/4
Bosch Rexroth AG Hydraulics
VT 3002 RE 29928/12.08
Technical data (For applications outside these parameters, please consult us!)
Terminal voltage according to VDE 0110 C
Current carrying capacity
U max. 48 VAC/DC
VT 3002…15H
I 15 A
VT 3002…32D
I 4A
VT 3002…32F
I 4A
VT 3002…48F
I 4A
VT 3002…64G
I 3A
A Plug-in screw terminals max 4 mm2, form H = 6 mm2
Connection cross-section
Type of connection (socket strip)
Pinout
VT 3002…15H
15-pin socket connector, form H, DIN 41612
VT 3002…32D
32-pin socket connector, form D, DIN 41612
VT 3002…32F
32-pin socket connector, form F, DIN 41612
VT 3002…48F
48-pin socket connector, form F, DIN 41612
VT 3002…64G
64-pin socket connector, form G, DIN 41612
VT 3002…15H
Even-numbered, rows d/z
VT 3002…32D
Even-numbered, rows a/c
VT 3002…32F
Even-numbered, rows b/z
VT 3002…48F
Even-numbered, rows d/b/z
VT 3002…64G
Even-numbered, rows f/d/b/z
Permissible ambient temperature range
ϑ –20 to +70 °C
Weight single/double Euro-format
m 0.5 kg / 0.8kg
Notes on installation
Push down the yellow operating levers and insert card completely. The card can only be unlocked and withdrawn after repeated actuation of the locking lever.
For the connection of cables, the connection web between
the two card guide rails can be removed or snapped in on the
other side.
Card holder for forms H 15-pin, D 32-pin, F 32-pin, and F 48-pin
Card holder for form G 64-pin Hat rail mounting only possible
in vertical position
95
2 4 6 8 1012 14161820 22242628 30 32
2 4 6 8 1012 14161820 22242628 30 32
2 4 6 8 1012 14161820 22242628 30 32
2 4 6 8 1012 14161820 22242628 30 32
z
2 4 6 8 1012 14161820 22242628 30 32
2 4 6 8 1012 14161820 22242628 30 32
2 4 6 8 1012 14161820 22242628 30 32
d
b
f
d
b
z
f
d
177
26 30
d
b
z
b
z
140
140
127
140
127
22
28
127
2 4 6 8 1012 14161820 22242628 30 32
14 18
140
127
20 24
127
b
2 4 6 8 1012 14161820 22242628 30 32
10
12 16
140
d
b
z
z
c
a
6
8
32
2 4 6 8 1012 14161820 22242628 30 32
2 4 6 8 1012 14161820 22242628 30 32
c
z
d
a
d
z
4
Dimension with hat rail and Euro-card 100 x 160 mm
1)
72
63
40
Ø4,2 (2x)
40
Ø4,2 (2x)
VT 3002-1-2X/64G
VT 3002-1-2X/48F
63
63
63
40
Ø4,2 (2x)
40
Ø4,2 (2x)
40
Ø4,2 (2x)
VT 3002-1-2X/32F
VT 3002-1-2X/32D
VT 3002-1-2X/15H
Electronic card with front panel
1,5
Card locking mechanism
3/4
Hydraulics Bosch Rexroth AG
RE 29928/12.08 VT 3002
Unit dimensions (dimensions in mm)
4/4
Bosch Rexroth AG Hydraulics
VT 3002 RE 29928/12.08
Unit dimensions (dimensions in mm)
VT 3002-2-2X/32D
X:
63
40
X
c2 c4 c6 c8 c10 c12 c14 c16 c18c20 c22 c24 c26 c28 c30 c32
a2 a4 a6 a8 a10a12 a14a16 a18 a20 a22 a24 a26 a28 a30 a32
c2 c4 c6 c8 c10 c12 c14 c16 c18 c20 c22 c24 c26 c28 c30 c32
169
234
262
273,8
276
220
a2 a4 a6 a8 a10a12 a14 a16 a18 a20 a22 a24 a26 a28 a30a32
Ø4,2 (2x)
Bosch Rexroth AG
Hydraulics
Zum Eisengießer 1
97816 Lohr am Main, Germany
Phone +49 (0) 93 52 / 18-0
Fax
+49 (0) 93 52 / 18-23 58
[email protected]
www.boschrexroth.de
© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It
may not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not
release the user from the obligation of own judgment and verification. It
must be remembered that our products are subject to a natural process
of wear and aging.