MAXXMEMORY - SYSTEM
A traditional heavy rim planter design, made out of durable and long lasting
polyethylene with an integrated revolutionary and innovative self-watering
system, offering maximum water supply with minimum effort.
The MAXXMEMORY planters are rotationally molded out of polyethylene resin for optimum
strength and are weather and temperature resistant for a durable and long lasting life.
They are finished in a real U.V. resistant Terra Cotta look, which will match any decor.
Our polyethylene planters are lightweight and their shock resistance makes them durable and
long lasting. The weatherproof finish will not peel when exposed to the elements, thus allowing
these planters to be used outdoors as well as indoors.
The MAXXMEMORY has a self watering system which takes care of itself even for the thirstiest
plant. It will provide the plant up to 36 weeks with sufficient water and nutrients.
The MAXXMEMORY planter is the only planter of its kind which holds an equal amount of water
as potting soil.
Soil versus water capacities
14 Quarts soil/4 gallon water
30 Quarts soil/30 gallon water
48 Quarts soil/14 gallon water
INSTRUCTIONS
Every MAXXMEMORY planter comes with abundant mineral substrate to cover the bottom part. This to avoid soil
getting into the watering system and controls the water supply to the plant
Spread out the substrate over the bottom part, covering the wicks with a finger thick layer.
Add some soil, place the plant with his root ball in the desired place and finish filling with soil, pressing it firmly into
place.
Fill the planter reservoir but keep watering the plant directly for the next month, so the roots can find their way to
the moist area in the bottom part of the planter and can do its self irrigation. Liquid fertilizer can be added directly
to the water. Excessive rainwater will run out through the center of the planter.
The water level indicator will let you know if the reservoir needs to be filled.
OUTDOOR USE
Remove the Plastic Plug in the center of the bottom to insure proper drainage of excessive rain water.
To keep the planter in freezing conditions outside use the sides plug to drain the water out.
CAUTION
For indoor use place the planter on an adequate saucer to collect possible overflow.
PP Plastic-Products
A subsidery of CompassCo
PO Box 68755 – Virginia Beach, VA 23471
Ph: 1 757 961 0961 Fx: 1 757 499 5602
Info@ PPPlastic-Planters.com