STATUS OF EP&M RATE CONTRACT ITEMS AS ON
04.01.2008
Sl.
No.
1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
Name of the R/C items
2
Alpin(Paper Pin)
ASTM-D PVC Pipes
Ayurvedic Veterinary Medicines
Absorbent Cotton
Black Hexagonal Bolts with nuts
Canvas Boot(Jungle Boot)
Canvas Shoe(P. T. Shoe)
Caps(Peak Cap, Forage Cap)
Cement Water Proofing Compound
C.I.Reflux Valve
Chloroxylenol Solution IP
Collapsible gate
Compact Desk-cum-Bench
Computer Table
Concrete Pipe(RCC Hume Pipe)
Copper Choke
Cotton Tag
Cresol with soap solution I.P.
ISI Marked Direct Action Hand Pump
DMS Ankle Boot(Black)
Drugs & Medicines
FRP Door Shutter & Door frame
G. I. Stay Wire
Great Coat
G. I. Barbed Wire
G.I. Flat
H. T. Insulator(disc insulator)
H. T. Stay Set
Hospital Bed Stead
ISI Marked India Mark-II Deep Well Hand
Pump and G. I. Riser Pipe 32mm
ISI Marked Rigid UPVC Pipes
Page
No.
Date of
original
validity
3
20.12.2007
07.08.2008
11.03.2008
19.02.2008
10.10.2008
28.10.2008
10.12.2008
04.05.2008
17.08.2008
11.02.2008
19.02.2008
28.01.2009
16.10.2008
30.05.2008
21.01.2009
28.10.2008
22.06.2007
19.02.2008
24.09.2007
03.06.2008
21.02.2008
14.2.2009
03.01.2009
24.07.2008
22.12.2007
03.03.2007
29.06.2008
13.03.2009
11.09.208
24.09.2007
07.08.2008
Present
period of
validity/
extension
4
20.06.2008(E)
22.06.2008(E)
24.03.2008
22.06.2008(E)
03.09.2007
24.03.2008
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
Khaki Woollen Beret Cap
L. T. Cross Arm
L. T. G. I. Pin
L. T. Stay Set
Lead Acid Storage Battery
LDPE Bag
Leather and Foot Wear Articles
M. S. Panelled Door and Window
M. S. Veranda Grill
M. S. Window Grill
Main Switch
Metal Rolling shutter
Metal table
Mineral Mixture
M.S./G. I. Pipes, fittings and franges
Nitrile Rubber Pump Bucket and Seat Valve
Nylon Socks
Office Paste
ORS Powder
Paints
P. S. C. Poles
Pin Insulator
Rain Coat
Soft Paraffin IP
Stamp Pad Ink
Steel Chair
Steel Door & Window Frame
Steel Shelving Cabinet
Steel Truss Angular & Purlins
Steel Window
Submersible Pump
Surgical Dressing
Tubular Truss & Purlins
Tarpaulins
Type writer ribbon
‘V’ Type Cross Arm
Woolen Jerseys Socks & Hostopes
10.10.2008
09.07.2007
17.07.2007
13.03.2009
19.08.2008
24.03.2009
16.08.2007
05.09.2007
01.02.2009
01.02.2009
30.08.2008
26.03.2009
15.11.2007
26.02.2007
05.12.2008
26.10.2007
09.08.2008
27.11.2008
19.02.2008
21.10.2008
07.08.2007
05.07.2007
21.11.2008
25.02.2008
27.11.2008
17.03.2009
14.03.2009
19.11.2007
14.03.2009
26.03,2009
25.12.2006
29.02.2008
03.03.2009
02.11.2008
25.02.2008
30.07.2007
17.08.2008
09.01.2008
17.01.2008
16.02.2008
05.03.2008
15.05.2008
26.02.2008
26.04.2008
07.02.2008
05.01.2008
19.05.2008
25.12.2007
30.01.2008
DIRECTORATE OF EXPORT PROMOTION AND MARKETING,
GOVERNMENT OF ORISSA, BHUBANESWAR.
********
LIST OF STORE ITEMS COVERED UNDER RATE CONTRACT
DISCLAIMER
“The list of rate contract items of Directorate of Export Promotion &
Marketing is being provided for information purposes only. Information
transmitted from this Website cannot be used for establishing legal
agreement. DEPM do not accept any responsibility for the accuracy of the
information nor for any expenses or damages incurred directly or
indirectly resulting from the use. Please check with the DEP&M, Orissa,
Ashoka Market Complex, Ashok Nagar, Bhubaneswar-9 for the correct
and updated information:”
Sl. No.
1
1.
Description of the
store item
2
ALPIN
(Paper Pin Straight)
M. S. Pin , Paper Straight
Nickel Plated made from
0.80mm 21 gauge dia wire
of length 28mm
conforming to IS:56531988.
Unit
Rate per
unit
Rs.
4
3
Rate per
100 gm
net weight
in plastic
container
size 10cm
x 6cm x
3.5cm
TERMS OF DELIVERY AND TAXES
13.00
Period of
validity
5
20.06.2008
Name of the rate
contract holding SSI
units
6
1. M/s. B. K. Products,
S.E.-12, Industrial
Estate, Cuttack-10
2. M/s. Ravi Industries,
S.E.-10, I.E., CTC-10.
:
1) The rate is ex-factory, inclusive of cost of packing in plastic container and exclusive of value
added tax which may be charged extra as admissible if any.
2.
Rate contract Circular No. 306 dt.10.1.08
Description of the store
Unit
Rate per
item
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
ASTM-D PVC PIPES
Upto 8” for schedule 40
and 80 only.
As per
Statement-A
Upto 5” for schedule 40 &
80 only
-do-
07.08.2008
(Extension vide
circular
No.1682
dt.25.02.2008)
Subject to
validity of EPM
registration
certificate and
VAT clearance
certificate.
-do-
Upto 12”
-do-
-do-
½” to 8” N.D. for schedule
40 and 80 only
-do-
-do-
1. ½”,to 6” except 3½” in
schedule-40
2. ½”,to 5” except 3½” in
schedule-80
Upto 6” for schedule 40 &
80 only and 8” for
schedule 80 only
1. Upto 2”, 3”, 4” & 5” for
schedule 40 and 80
only
-do-
-do-
-do-
-do-
-do-
-do-
-do-
-do-
1¼”, 1½”, 2”,3”,4”,5”,6”.8”
in Schedule-40 and
Schedule-80
-do-
-do-
½”nd to 8”nd in Schedule40 & Schedule-80
½”,¾”, 1”, 1¼”, 1½”,
2”,3”,4”,5”,6” & 8” in
schedule-40 & 80
-do-
-do-
Upto 12”
STATEMENT – A.
1. Duro Pipes (P) Ltd., Plot
No.51/A, Sector-A,
Zone-A, I.E.,
Mancheswar,
Bhubaneswar.
2.Konark Pipe & Synthetics
(P) Ltd., B-9, I.E.,
Mancheswar,
Bhubaneswar.
3.Jaiswal Plastic Tubes
Ltd., Ganeswarpur I.E., NH5, P.O. Januganj, Balasore.
4.Lingaraj Pipes (P) Ltd.,
Plot No.13-A, I.E.,
Chandaka, Khurda.
5. Swastik PVC Pipe, Sana
Kusastali, Bada
Kusastali, Ganjam.
6.Krishna Plast Pipes (P)
Ltd., I.E., Railway Station
Road, Bargarh.
7.Shree Plastics (P) Ltd.,
Andhapasara Road,
Berhampur, Ganjam.
8. Oriplast Ltd., O.T. Road,
Balasore.
(Included consequent
upon the orders dt.
11.9.2003 of the Hon’ble
High Court passed in
WPC No. 6923/2002,
No.5456/ 2003 &
No.4653/2003.
9. PGL Supply & services (P)
Ltd., Plot No.4A, Chandaka
Nuecleus Complex, SectorB,Patia, Bhubaneswar
10. Hari Udyog(P) Ltd., O.T.
Road, Balasore
11.Jhalani Steel Tubular
Poles, S-3/67, Mancheswar,
I.E., Bhubaneswar
Statement of rates of different sizes of UPVC Pipes as per ASTM (D)-1785/89 along with average
weight in kg. Per running meter Rate per kg. Rs.66.00Rupees sixty six) only.
Sl.
Sizes in
Schedule-40
Schedule-80
Schedule-120
No.
inches
Quantity in
Rate
Quantity in Rate per
Quantity in Rate per
kg. per
per mtr. kg. per
mtr. (Rs.)
kg. per
mtr. (Rs.)
running
(Rs.)
running
running
metre
metre
metre
1
½
0.248
16.36
0.310
20.46
0.344
22.70
2
¾
0.330
21.78
0.421
27.78
0.454
29.96
3
1
0.486
32.07
0.617
40.72
0.677
44.68
4
1¼
0.666
43.95
0.858
56.62
0.946
62.43
5
1½
0.785
51.81
1.036
68.37
1.150
75.90
6
2
1.059
69.89
1.436
94.77
1.620
106.92
7
2½
1.658
109.42
2.192
144.67
2.356
155.49
8
3
2.173
143.41
2.934
193.64
3.364
222.02
9
3½
2.605
171.93
3.578
236.14
3.901
257.46
10
4
3.089
203.87
4.288
283.00
5.418
357.58
11
5
4.184
276.14
5.959
393.29
7.731
510.24
12
6
5.445
359.37
8.185
540.21
10.497
692.80
13
8
8.188
540.40
12.436
820.77
17.349
1145.03
14
10
11.625
767.25
18.425
1216.05
25.533
1685.17
1. The weight per running meter is indicative for conclusion of rate of different classes and sizes of
PVC pipes as per ASTM-D-1785/89. However, actual weight may vary subject to provision of
relevant specification.
2. The rates are ex-factory, exclusive of excise duty, cess on excise duty, OST, Surcharge on Sales
Tax and Entry Tax as admissible, if any.
3. The cost of “O” ring is not included in the rates of contract.
4. All pipes shall be accepted subject to testing by CIPET, Bhubaneswar.
5. The threading and belling charges (per piece) are to be paid extra as shown below.
Sl.
Sizes
Rate
No.
1
½” to 1”
Rs.5.16 (Rupees five and paise sixteen only)
2
1¼” to 2½”
Rs.5.43 (Rupees five and paise forty-three only)
3
3” to 3½”
Rs.6.54 (Rupees six and paise fifty-four only)
4.
4”
Rs.7.52 (Rupees seven and paise fifty-two only)
5
5”
Rs.11.77 (Rupees eleven and paise seventy-seven only)
6
6”
Rs.12.51 (Rupees twelve and paise fifty-one only)
7
8”
Rs.15.22 (Rupees fifteen and paise twenty-two only)
8
10”
Rs.21.28 (Rupees twenty-one and paise twenty-eight only)
9
12”
Rs.25.01 (Rupees twenty-five and paise one only)
6. Description:
i)
Polyvinyl Chloride (PVC) Plastic Pipe as per ASTM-D-1785/89 length of the pipe
laying length will be as specified by the purchaser. Colours off the pipe shall be blue
or as per the requirement of the purchaser. The length of the pipe shall be inclusive
of threading and belling portion.
ii)
Pipe shall be supplied with both ends threaded with external thread and necessary
jointing coupler will be supplied free of cost in each pipe or pipe shall be supplied
with one end male thread and other end female thread. The female end grooving
internal thread is to be belled in order to accept the male end while jointing the pipes
as per the indentor’s requirement. Jointing of pipe will be done by any of the
following system which will be prescribed by the purchaser in the purchase order.
a)
The threads will be in accordance with DIN/ACME/BIS Specifications as per the
requirement of the purchaser.
b)
The threads will be in accordance with the DIN/ACME/BIS Specifications as per the
requirement of the purchaser. Pipes will be provided with a grooving at the root of
the male thread to accommodate a flexible rubber ‘O’ ring as per the purchaser/s
requirement to make the joint water tight.
i)
2” ND SCHEDULE-4-120 UPVC PIPE.
The pipe will conform to ASTM-D-1785/89 having external threads at the one end and
internal thread on the other (Belled end). The threading shall conform to DIN-2999 Pt.I
except that the nominal length of thread shall be 30mm as specified in DIN 4925, Part-I. The
external threaded and shall have a groove of rectangular cross section for accommodation of
a Rubber ‘O’ ring placed at nominal distance of 5 from the end of the thread. The root
diameter of the groove shall be 6.68 + 0.2 mm and the width shall be 4.1 mm + 0.1mm. The
belled end having internal threads shall have an additional bell preceding the thread to
accept (and keep compressed) a Rubber ‘O’ ring. The length of the additional bell shall be
15mm ±m2.0mm. The dia of the additional bell shall be 61.5±0.2mm.
ii)
5” ND SCHEDULE-40 UPVC PIES:
The pipe will conform to ASTM-D-1785/89 having external thread one end and internal
thread on the other (belled end). The threading conform to trapezoidal thread 140x6 of DIN2925, Pt.II, the thread end shall have a groove of rectangular cross section for
accommodating a rubber ‘O’ ring placed at the nominal distance of 5mm from the end of the
thread. The root diameter of the groove shall be equal to the minor dia of the thread and the
width shall be 6.4mm+0.1mm. The belled end having internal thread shall have an
additional bell preceding the thread to accept (and keep compressed) a rubber ‘O’ ring the
length of the additional bell shall be 18mm±2.0mm. The inner diameter of the additional bell
shall be 142.6mm±0.2mm.
iii) Specification 2nd Schedule-80 UPVC well casing pipe conforming to ASTM-D-1785/89 are
made with end with parallel external thread (with worth) with a 450 chamber. Each pipe is to
be supplied with an injection moulder PVC double socket with parallel thread (with worth)
separate by a stop function of the middle and provisional for fitting 4mm smooth ‘O’ ring
made of nitrile rubber shore hardness of 65-70 between the end of the thread on each side of
the stopper ‘O’ ring will be supplied at extra cost.
7. The specific gravity of the material of the pipe shall be 1.40 to 1.46 /cc.
8. Purchaser requiring any other type of jointing system may intimate the Directorate the details of
the same in order to examine and take steps to incorporate in the Rate contract.
9. The name of the manufacturer along with batch number, class of pipe and sizes of pipe shall be
stenciled legibly on each pipe length.
TERMS OF DELIVERY AND TAXES
:
1. Pre-delivery inspection of all supplies shall be made jointly by the technical officers of the
Directorate of Export Promotion & Marketing, Orissa, Bhubaneswar and CIPET, Bhubaneswar.
2. The indenting officers are required to intimate the Directorate of EPM to conduct PDI before
taking delivery of the materials from factory-site. Their purchase order should also contain the
Clause PDI by the Directorate of EPM., Orissa, Bhubaneswar.
3. In case of urgent requirement, the indentor may also conduct their own PDI.
4. Time allowed for delivery of goods: Supplies will be made in respect of pipes of all sizes worth of
Rs.2.00 lakhs per month but not before 20 days from the date of receipt of the supply order. The
schedule may however be mutually decided between the purchaser and the rate contract holding
SSI unit.
RATE CONTRACT CIRCULAR NO. 3982 dt. 8.8.06, 4525 dt.11.9.06, 6304 dt.1.12.06, 6802
dt.23.1 2.06, 651 dt.22.1.07, 1558 dt.27.2.07, 1855 dt.6.3.07, 2897 dt.2.5.07,6020 dt.4.8.07, 6424
dt.22.8.07,572 dt.21.1.08 & 1682 dt.25.2.2008
3.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
AYURVEDIC &
VETERINARY
MEDICINES
a) Stomachic Tonic
Powder (As per
Statement-‘A’-I)
b) Antizymotic powder(As
per Statement-‘A’-I)
c) Astringent Powder(As
per Statement-‘A’-I)
d) Dry Dressing
Powder(As per
Statement-‘A’-I)
Note: The detailed
compositions of each of the
above veterinary medicines
is mentioned at Statement‘A’-I
Per kg.
58.00
Per kg
61.00
Per kg
34.00
Per kg
36.00
11.03.2008
1) M/s. Baal Gopal
Agrovet & Chemical
Industries (P) Ltd.,
Plot No.41, New I.E.,
Jagatpur Cuttack.
2) M/s. Kosmic
Laboratories, Shed –
2/63, New I.E.,
Jagatpur, Cuttack754021
3) M/s. Usha Ayurvedic
Pharmacy, Meria
Bazar, Cuttack753001
4) M/s. Amrit
Pharmaceutical &
Research Centre,
Arabinda Nagar, 2nd
Lane, Berhampur-4
5) M/s. Narayan
Pharmaceuticals Pvt.
Ltd., Plot No.149,
Sector-A. Zone-A, I.E.,
Mancheswar,
Bhubaneswar
6) M/s. Kingsy
Pharmaceutical
Works, D-2/6,
Mancheswar I.E.,
Bhubaneswar-10.
(Annual Production
capacity 1.80 lakh
packets)(upto
31.12.07)
TERMS OF DELIVERY AND TAXES
:
1) The rates are ex-factory, inclusive of cost of packing exclusive of Orissa entry tax, & Value Added
Tax which may be charged extra, as admissible, if any.
2) The packing of the store item shall be in polyethylene bag legibly printed with the name of the
medicine batch number, date of manufacturing, net weight and name and address of the
manufacturer.
RATE CONTRACT CIRCULAR NO.
1961 dt.12.3.07,2668 dt.20.4.07,3612 dt.4.6.07,3980 dt.20.6.07,5742 dt.23.7.07, 6425 dt.22.8.07,
7169 dt.29.9.07
STATEMENT-‘A’-I
Composition of Ayurvedic veterinary medicines as given by the Dean, Faculty of Veterinary Science &
Animal Husbandry, Orissa University of Agriculture and Technology, Bhubaneswar vides his letter
No.210 OVE dtd. 2.7.87 and Drugs controller, Orissa, Bhubaneswar in Drug Licence No.66-Ayurva,
vide Letter No.2738/DC-DOMRAIOR-4/86,dtd.12.3.86.
Sl.No.
Name of the Medicine
Composition
Percentage by weight
1.
Stomachie tonic Powder 1. Gentiana Kurro
20%
2.Swertia Chirreta
6%
3. Strychos Nux Vomica 3%
4.Ferrula Foetida
7%
5.Aerous Calamus
4%
6.Zingiber Officinale
6%
7.Cuminum cymium
5%
8.Corroandrum sativum 1%
9.Allium Capa
3%
10.allium sativum
2%
11.Embellia ribes
4%
12.Aggle Marmelus
2%
13.Piper Nigrum
2%
14.Emolica Officinalis
3%
15.Terminalia bellirie
3%
16.Terminalia Chebule
4%
17.Tinospora Cordifelia
4%
18.sodium Biacarbonate 5%
19.Black salt
16%
Total
100%
2.
Antizymotic Powder
1.Ferula Foetida
10%
2.Strychno Nux vomiea
8%
3.Sinapsis Nigrum
2%
4.Capsicum annum
4%
5.Cur curma Longa
3%
6.Foeniculum Vulgare
4%
7.coziandrum Sativum
4%
8.Zingiber Officinale
4%
9.Cuminum cyminum
6%
10.Piper Nigrum
7%
11.Azadirachita Tndica
4%
12.Acrous Calamus
4%
13.allium sativum
3%
3.
4.
4.
Description of the
store item
Astringent Powder
Dry Dressing Powder
Unit
14.Carcum Capticum
15.Piper longum(Piper
longam)
16.Myristia Fragrans
17.Sodium Bicarbonate
Total
1.Holexhena
Antidyxcenteria
2.Accacia Catechu
3.Tinospore Cordifolia
4.Punica Grenatum
5.Phyallenthus
Embelica
6.Ternubakua
vekkuruca
7.Terminalia chebule
8.Aegle marmales
9.Coyperus Rotondus
10.Zingiber officinate
11.Kaoline
12.Ferrous Sulphate
13.Creates calcium
carbonate
14.Alum
Total
1.Pulv Bisalyakarani
Pulv Neemseed
3.Boric acid
4.Zinc Oxide
5.Calcium Carbonete
6.Magnesium Sulphate
7.Kaolin
8.Neptheline
9.Benzine Hex-chloride
10.Sulphur
Total
Rate per
unit
Rs.
Period of
validity
ABSORBENT COTTON
Absorbent Cotton IP Grade
500 gms. net pack
Rate per 500
gm net pack
41.40
19.02.2008
6%
5%
8%
18%
100%
10%
6%
6%
4%
6%
6%
3%
6%
6%
6%
15%
10%
9%
7%
100%
20%
50%
03%
03%
10%
02%
05%
01%
00.5%
05.5%
100%
Name of the rate
contract holding SSI
units
1. Lakshmi Surgicals (A
unit of Lakshmi Health
Care Products Pvt. Ltd.),
40-F, Mancheswar Indl.
Estate, Bhubaneswar-10
2. Surgiplast (India), Main
Road, Kukudakhandi,
Ganjam.
TERMS OF DELIVERY & TAXES :
1. The rate is ex-factory, inclusive of cost of packing and exclusive of value added tax which may be
charged extra as admissible if any.
2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations
charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of
one year from the date of issue of rate contract.
3. The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
Rate Contract Circular No. 1201 dt.20.02.2007, 1380 dt.23.2.2007
5.
Description of the store
item
Unit
BLACK HEXAGONAL
BOLTS WITH NUTS OF
16 MM DIA
CONFORMING TO IS
NO.1363/67.
Sl.
No.
6.
Size in
mm
1
25
Rate
per
Kg.
-do-
2
35
-do-
46.65
3
40
-do-
46.55
4
50
-do-
46.30
5
65
-do-
45.60
6
75
-do-
45.30
7
85
-do-
45.20
8
100
-do-
44.50
9
125
-do-
44.20
10
150
-do-
44.00
11
175
-do-
43.85
12
200
-do-
43.35
13
225
-do-
43.25
14
250
-do-
43.15
15
275
-do-
43.00
16
300
-do-
42.90
PIPES
Period of
validity
As per
Statement
given below
10.10.2008
for a period of
one year from
the issue of
the R/c
circular.
TERMS OF DELIVERY
AND TAXES:
2)
The rate contract
holding firm shall furnish
manufacturers
test
certificate
along
with
purchase invoices of M.S.
round 16mm dia from
OSIC Cuttack/SAIL/RINL
while preferring bills at
the time of supply of store
items.
3)
The
delivery
schedule may be mutually
decided
between
the
indentor and the supplier.
RATE CONTRACT
CIRCULAR NO.7421
Dt.11.10.07
Unit
&
Name of the rate
contract holding SSI
units
1) M/s. Kirti Industrial
Enterprises, 11/9-I.E.,
Cuttack-10.
1) The rates recommended
for conclusion of Rate
Contract are ex-factory,
exclusive of
Orissa entry
tax and value added tax
which may be charged
extra, as admissible, if
any.
46.95
Description of the store
item
C.I./SS.
FITTINGS
Rs.
Rate per unit
Rs.
Rate per unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
Cast Iron fittings for spigot
and socket pressure pipe
(for lead joint) for water,
gas
and
sewerage
conforming
to
IS
No.1538/93 80mm to 300
mm nominal dia meter.
31.68 per kg
or 31676.00
per MT
TERMS OF DELIVERY AND TAXES
03.01.2007
1. M/s. Utkal Foundry &
Engg. Co. Ltd., At/P.O.
Remed, Sambalpur.
:
RATE CONTRACT CIRCULAR NO. 7421 dt.11.10.07
7.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
CANVAS BOOT
(JUNGLE BOOT)
Canvas Boot with Rubber
Sole (Jungle Boot) as per
the sample & design
approved by Orissa Police
generally conforming to IS
No.3736/1995.
Per pair
TERMS OF DELIVERY AND TAXES
1)
2)
3)
8.
151.00
28.10.2008
Name of the rate
contract holding SSI
units
1.Baba Enterprises,
H.O.92, Shaktinagar, Link
Road,CTC(Annual
Production capacity24,000 pairs)
2.Venus Shoes & Leather
Products,Rasulgarh,Bhuba
neswar(Annual Production
Capacity 150000 pairs)
3.Meher Footwear
Industries,
Saragiguda,Titilagarh33,Bolangir(Valid upto
6.6.2008)
4.New Step, Old station
Road, Rourkela-1(Valid
upto 28.10.2008)
5.Classic shoes, Plot
No.2273,tarol,New
I.e.,Jagatpur,Cuttack
(Valid upto 24.11.2007)
:
The rate is ex-factory inclusive of cost of packing, exclusive of VAT and entry tax, which may be
charged extra, as applicable, if any.
The delivery schedule may be decided between the R/C holder and the indenting officer.
Since the rate is fixed as per DGS&D rate it was decided that the unit will manufacture the
canvas boot conforming to the IS specification as per the DGS&D sample to be supplied by the
Orissa Police Hqrs., Cuttack.
RATE CONTRACT CIRCULAR NO. 7690 dt.29.10.2007
Description of the store
Unit
Rate per
item
unit
Rs.
CANVAS SHOES
(P.T.SHOES)
Period of
validity
10.12.2008
Name of the rate
contract holding SSI
units
1.M/s. Venus Shoes &
Leather Products,
Rasulgarh, BBSR.(From
Canvas shoes with rubber
sole (P. T. Shoes) generally
conforming
to
IS
No.3735/89 and as per
the design approved by
Orissa Police.
Per pair
81.00
Subject to
validity of
EP&M Regn.
& VAT
clearance
certificate
11.12.07 to
10.12.08)(Annual
Production Capacity 270000 pairs as per DIC
PMT Regn. Certificate)
2.M/s. Baba Enterpries,
H-92,Shaktinagar, Link
Road, Cuttack (11.12.07 to
10.12.08) (Annual
Production Capacity 24,000 pairs as per the
NSIC Certificate
3.M/s. Meher Foot wear
Industries, Sargiuda,
Tutukagarh-767033,
Dist:Bolangir(Orissa)(Upto
6.6.08)
4. M/s. New Step, Old
station road, Rourkela-1
(Upto 10.12.08)
5.M/s. Classic Shoes,
Ramesh Colony, Tarola,
Plot No.2273, Jagatpur,
Cuttack (Upto
10.12.08)(Annual
Production Capacity –
25,000 pairs as per the
DIC PMT Regn. Certificate)
TERMS OF DELIVERY AND TAXES :
1. The rate is ex-factory, inclusive of cost of packing and exclusive of VAT and Orissa entry tax
which may be charged extra, as admissible, if any.
2. The delivery schedule may be mutually decided between the rate contract holder and the
indenting officer.
3. Purchasing officers are requested to conduct PDI of shoes before lifting the same from the
factory site.
9.
RATE CONTRACT CIRCULAR NO. 8528(200/EPM dt. 11.12.2007
Description of the store
item
COMPUTER TABLE
Unit
Rate per
unit
Rs.
Period of
validity
30.05.2008
Name of the rate
contract holding SSI
units
M/s. Konark Industries,
SE-11,I.E.,Cuttack-10
Specification of the Computer Table
Computer table made out of M.S.Square tube and ISI marked Pre laminated Board conforming to the
design, drawing and specification of DTET, Orissa, Cuttack. Drawing is enclosed.
i. Frame & leg – Made out of 25x25x1.25mm M.s.Square tube coforming I.S.-7138
ii.Tap,Key Board,fileshelf UPS shelf,CPU shelf & drawer: Made out of 18mm thick pre laminated board
(ISI marked)
iii.Key Board – Key Board should be with sliding arrangement for smooth to & fro operation.
iv. Fixing of P.L.Board to frames: Shall be fixed with wood screw of size 8 x 38mm. Three nos. of pre
laminated board used to provide vertical support to key board and drawer box shall be fixed to top
board with the help of angle fabricated from CR sheet 0.8mm with screws.
v.side bidding in Prelaminated Board – Plastic/wood.
vi.Stiffener – M.S.squate tube stiffener of size 25x25x1.25mm shall be provided under.(1)Top-1 no.(2)File
Shelf-2 nos.(3)UPS & CPU Shelf-2 nos.
vii.Joining of members in the frame – By four side continuous welding with good finish.
viii.Finish – Painting shall be smooth and uniform and free from burrs and dents and colour as agreed
between the purchaser and supplier.
1. 36”WX22”DX30”H
Per each
Rs.1771.49
(914X559X762mm) with
drawer (Detail drawing is
enclosed Annexure-‘A’)
2. 32”Wx22”Dx30”H
Per each
Rs.1426.53
(813x559x762mm)
Without drawer(Detail
drawing is enclosed vide
Annexure’B’)
Terms of Delivery:
1.The rates are ex-factory inclusive of excise duty and exclusive of value added tax which may be
charged extra as admissible if any.
2.The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided
between the rate contract holder and Indenting Officer.
Rate Contract Circular No.3499 dt.31.5.2007,466 dt.17.1.08
10.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
CAPS:
1. Peak Cap (for R.I.
Inspector, Subedar & Submajor).
Per each
140.00
Khaki Barathela with dark
tan leather head band 4
khaki eyelets at the back
portion Chin Strap, Fixed
on to 2 Ashoka Lion Cap
buttons (Nickel Coated) as
per specification provided
by
Orissa
Police
Department.
2. Forage Cap (For Sgt.
S.I., Jam. ASI & H.M.):
Dark blue serge, diameter
across top 10”, Sides 3”
deep bound black braided
ribbon 2” deep rounded
Peak 2” deep at the centre
to drap at an angle of 45%
chin strap 5/8” wide
buttoned on to 2 gorget
buttons
behind
the
corners of the peak and
filled with an adjusting
Per each
131.00
04.05.2008
1. M/s. Suruchi, Mahatab
Road, Kalinga Lane,
Cuttack-12.
black patent leather chin
strap fixed with 2 Ashoka
Lion Cap buttons (Nickel
Coated) and removable
khaki Terri cotton suiting
cover.
(As
per
specifications provided by
Orissa Police Department).
TERMS OF DELIVERY AND TAXES
:
1) The supply of stores should be made strictly in conformity with the specification of Orissa Police
with regard to quality, shade, sizes and perfect workmanship.
2) The delivery schedule however may be mutually decided between the rate contract holder and
the indenting officer.
3) The above rates are ex-factory inclusive of cost of packing, exclusive of Orissa entry tax and VAT
which may be charged extra, if any.
RATE CONTRACT CIRCULAR NO. 2949 dt.5.5.07
11.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
CEMENT
WATER
PROOFING COMPOUND.
Integrated Cement Water
Proofing
Comp-ound
(Nominal sett-ing) in liquid
form conforming to IS:
2645/75
(maximum
chloride content 0.25%
and maximum sulphate
content-Nil.
Per kg
18.40
17.08.2008
1. M/s. Winco Cement
Waterproofing Co. (P)
Ltd., At. Uttereswar
Temple Street,
Gosaninuagaon,
Berhampur, Ganjam.
(Annual Production
Capacity 150 MT)
TERMS OF DELIVERY AND TAXES :
• The rates are ex-factory and inclusive of Excise Duty cost of packing and exclusive of VAT
and Orissa entry tax which may be charged extra, as admissible, if any.
•
The delivery schedule may be mutually decided between the indenting officer and the
supplier.
RATE CONTRACT CIRCULAR NO. 6354 dt.20.8.07
12.
Description of the store
item
Unit
C.I.REFLUXE VALVE
CONFORMING TO IS:NO.
5312(Pt-I)/84
1. Swing check type
Per each
Rate per
unit
Rs.
Period of
validity
11.02.2008
Name of the rate
contract holding SSI
units
1.Anupama Industries,
Plot No.738, Rasulgarh,
Bhubaneswar
2.Tyfore Engineers, 32-A,
flanged refluxe (NonSec-A, Zone-A, I.E.,
return)Valve without by
Mancheswar,
pass arrangement for
Bhubaneswar-10.(Annual
water Works Purpose
production capacity 40
single door pattern
nos. Rs.1.00 lakh)
conforming to IS:No.
5312(Pt.I)/84
Nominal
Nominal
size
pressure
2360.00
80 mm
1.0 Mpa
4900.00
100 mm
1.0 Mpa
6330.00
150mm
1.0 Mpa
8100.00
200 mm
1.0 Mpa
9540.00
250 mm
1.0 Mpa
13,400.00
300 mm
1.0 Mpa
TERMS OF DELIVERY AND TAXES :
• The rates are ex-factory and inclusive of VAT which may be charged extra, as admissible,
if any.
•
The delivery schedule may be mutually decided between the indenting officer and the
supplier.
RATE CONTRACT CIRCULAR NO. 978 dt.12.02.2007, 82 dt.3.1.03
13.
Description of the store
item
CHLOROXYLENOL
SOLUTION B.P.C.
a) 450 ml. in Amber
Glass Bottle.
Unit
Rate per
unit
Rs.
39.00
Period of
validity
19.02.2008
Name of the rate
contract holding SSI
units
1. I.D.D.Pvt. Ltd.,
Madhupatna, I.E.,
Cuttack-10.
2.Bharat Salt & Chemical,
Industries Ltd.,
Nayasarak, Cuttack-2
3. Jagannath Chemical &
Pharmaceuticals Works
Pvt. Ltd., A-29, 30, 31,
I.E., Cuttack-10.
4.Bubuna Chemicals, D2/2,New I.E.,Jagatpur,
Cuttack-21
5.Novo Pharmaceuticals
Pvt. Ltd., I.E., Cuttack-10
TERMS OF DELIVERY AND TAXES :
• The rate is ex-factory inclusive of cost of packing and exclusive of VAT which may be
charged extra, as admissible, if any.
•
The delivery schedule may be mutually decided between the indenting officer and the
supplier.
•
The H&FW Deptt., Govt. of Orissa, will pay 1% of rate contract rate towards
transporation charges for supply of Drugs & Medicines at different stores/ Medicals of
the State for a period of one year from the date of issue of rate contract.
RATE CONTRACT CIRCULAR NO. 1216 dt.20.2.07, 1841 dt.1.3.07
14.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
COLLAPSIBLE GATE:
Conforming
to
ISS
No.10521/1983 made out
of M. S. Channel (19x10x3)
mm, M. S. Flat (25x5) mm,
(19x5) mm in latties, M.S.
Flat (25x12)mm and M.S.
Angles (25x25x5) mm in
top and bottom rails
including clamp-ing and
locking arrangement with
gap between collapsible
channel 4” apart and
necessary painting.
3 sets of latties
4 sets of latties
28.01.2009
1) Agarwala Fabricators,
At/P.O.-Attabira,
Baragarh.
2) Kalinga Industries,
I.E., Sambalpur.
3) Panigrahi Fabricators
& Engineering
Workshop,
Shantipada, Bolangir.
Per kg.
Per kg.
TERMS OF DELIVERY AND TAXES
37.00
36.60
:
1) The rates are ex-factory and exclusive of VAT and Orissa entry tax which may be charged
extra, as admissible, if any.
2) The minimum time allowed for delivery of goods and delivery schedule may be mutually
decided between the rate contract holders and the indenting officer.
RATE CONTRACT CIRCULAR NO. 783 dt.29.1.2008
15.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
COMPACT DESK- CUMBENCH: (DUAL DESK):
The Compact Desk-cumBench (Dual Desk) is for
the High School, Upper
Primary School and Lower
Primary School students.
The frame shall be made
out of square tube of size
25x25x1.25mm
thick
conforming to IS: 7138.
16.10.2008
As per list given bellow.
The desk top, shelf, bench
seat, back rest and book
protector shall be made
out
of
pre-laminated
medium
density
fibre
board of 18mm thick
conforming
to
IS:
14587/98.
The
prelaminated medium density
fibre boards shall be fixed
by slotted counter shunk
head wood screw of size
No.8 x 40 mm long
conforming to IS: 6760/72
with the square tubes. The
square tube frame shall be
painted with red-oxide
primer and bright colour
paints such as yellow,
green, olive green and
blue. The edges of the prelaminated boards shall be
painted with bright wood
paint colours with proper
adhesion. The Desk-cumBench shall be made as
per the drawing and
design approved by the
School & Mass Education
Department, Government
of Orissa appended to the
prospective offer notices.
The Desk-cum-Bench shall
be of following sizes.
Sizes:
1. 42”x33”x30”
(LxWxH)
2. 36”x30”x28”
(LxWxH).
Per each
2039.00
Per each
1699.00
NAME OF THE R/C HOLDERS :
1.
2.
3.
4.
5.
6.
7.
8.
9.
Agarwalla Fabricators, At/P.O. Atabira, Bargarh.(Annual Production capacity 400 nos.)
Sanjeeb Enterprises, Jagannath Road, Madhupatna, Cuttack.(Annual Production capacity
Rs.30,00,000/-)
Orissa Steel & Wire Products Ltd., B-14, I.E., Cuttack-10.
Mahalaxmi Steel Industries, Durgabazar, Jagatsinghpur(Annual Production Capacity
Rs.75,000/-)
Jagannath Industries, Station Road, Baripada, Mayurbhanj(Annual Production Capacity 2 MT)
Kalinga Industries, Baraipalli, Sambalpur.
Utkal Metal Products(P)Ltd.,C-3,I.E.,Berhampur,Ganjam
Rollex Enterprisers, I.E., Cuttack-10.
Xenium & Xenium, Uditnagar Chowk, Rourkela.(Annual Production Capacity 100 MT)
10. Subash Iron & Agricultural Industries, I.E., Kesinga, Kalahandi (Annual Production Capacity
18,000 nos.)
11. Mealonie Colour Chamber, In front of Biswambar Vidyapith, Puri.(Annual Production Capacity
250 nos.)
12. Vijoy Engineering, At/P.O. Raghunathpur, Baripada, Mayurbhanj(Annual Production Capacity
4 MT)
13. Chhatia Panchayat Industries L.E. Co.Op. Society Ltd., At/P.O. Chhatia, Jajpur.
14. Dev Steel Industry, Plot No.4/330, Raghunathpur, P.O. Samantarapur Nuagaon Chhak,
Bhubaneswar (Annual Production Capacity 8 Lakh)
15. Kartik Enterprisers, I.E., Cuttack-10.
16. Delux Steel Industries, Plot No.738, Jail Road, Jharpada, Bhubaneswar.
17. Konark Enterprises, A-40, I.E., Cuttack-10.
18. Orissa Agrico Pvt. Ltd., B-9, I.E., Cuttack-10.
19. Basanti Industries, Netajinagar, I.E., Cuttack-10.
20. Kiran Enterprises, Gopalgaon, Chunabhati, Balasore (Annual Production Capacity 400 nos.)
21. Mohalaya Welding & Fabrication Works,Qr.No.B/139,Koelnagar,Rourkela
22. Narayani Welding Workshop, Gosani Nuagaon, Berhampur.
23. M.M. & Co., I.E., Cuttack-10.
24. Prachi Works Ltd., 35-Sector-A, Zone-B, I.E., Bhubaneswar.
25. Ananda Fabricators & Engineers,Plot No.172,New I.E.,Jagatpur,Cuttack
26. Padma Auto Body Builders, Plot No.144, Zone-C,New I.E., Jagatpur, Cuttack-21
27. A. H. Industries, Nayachouk, Madhupatna, Cuttack
28. Meera Industries, Hemsurpara, Angul.
29. Steel Tex,At-Hotatuta Road, Talcher, Angul
30. Laxmi Metal Industries, At/P.O.-Main Road, Phulbani (Annual Production Capacity 96 Nos.)
31. Maa Autobody Builders,Bidyadharpur,Cuttack
32. Grand Fabricators, Lewis Road, Bhubaneswar.
33. Dibyadutee Chemicals & Engg., Plot No.38, I.E., Jagatpur, Cuttack
34. Rinki Steel Industries, Chandrasekharnagar, Bolangir(Annual Production Capacity 30 MT)
35. Kanika Furniture Pvt. Ltd., N.H.-5, Bampada, Chhanapur, Balasore. (Annual Production
Capacity 60 MT)
36. Unique Enterprises, Netajinagar, Khhanagar, Cuttack.(Annual Production Capacity
Rs.10,00,000/-)
37. Leo Engineers (P) Ltd., 93-B, New I.E., Jagatpur, Cuttack.
38. Sonax Industries, I.E., Kajidiha, Cuttack.
39. Vasavi Steels, Bhapur Bazar, Khaja Street, Berhampur.(Annual Production Capacity 300 nos)
40. Swasti Furniture Inds.,Plot No.72/D,Sec.A,Zone-D(Annual Production Capacity 18 Lakh)
41. Ashutosh Industries, Plot No.271/F, Sector-A, Zone-B, Mancheswar I.E., BBSR.(Annual
Production Capacity Rs.1.3 crore)
42. Shiba Shakti Industries, Gulipatna,Umerkot,Nabarangpur
43. Krishna Industries, Nayachouk,Madhupatna, Cuttack
44. Classic Metal Products, Jagannath Road, I.E.,Cuttack-10(Annual Production CapacityRs.60,00,000/-)
45. Maa Metal Industries, At-Ganesh Bazar, Main Road, Phulabani(Valid upto 18.3.2008)
46. Choudhury Fabrication Works, At/P.O.-Bamra, Sambalpur(valid upto 16.10.2008)
47. Radha Enterprises, At/P.O.-Nayasarak,Cuttack(valid upto 16.10.2008)
48. M.N.Engg.,Plot No.71,fishery lane,Chintamaniswar,Bhubaneswar(valid upto 6.6.2008)
49. Raja Steel Industries,Ranipata,Via-Paralakhemundi,Gajapati(valid upto 16.10.2008)
50. Sri Aurobindo Fabrication,At-Hasinpur,P.O.-Ganiganja,Via-Baripada,Bhadrak(valid upto
16.10.2008)
51. Soor Engg.,Plot No.159,New I.E.,Jagatpur,Cuttack(valid upto 16.10.2008)
52. Sana Iron & Steel Industry, DNK Junction,At/P.O.-Malkangiri(valid upto 16.10.2008)
53. Konark Industries,SE-II, I.E., Cuttack-10(valid upto 16.10.2008)
54. CEF Engineering, Plot No.17,Rasulgarh,Bhubaneswar(Production capacity as per DIC – 30
Lakh)
55. Kalinga Equipments, New Mancheswar,I.E., S-1/110 & 107, BBSR
56. Allied Industries, B-1,I.E.,Cuttack
TERMS OF DELIVERY & TAXES :
2. The rates are ex-factory, exclusive of VAT and entry tax which may be charged extra as
admissible, if any.
3. The minimum time allowed for delivery of goods is as follows:
a)
Orders upto Rs.5,000/- … 30 days.
b)
Orders from Rs.5,000/- to Rs.10,000/- … 45 days
c)
Orders for subsequent of Rs.5,000/- … 15 days more.
4. The delivery schedule may be mutually decided between the rate contract holders and the
indenting officers.
RATE CONTRACT CIRCULAR NO. 7561 dt.17.10.07, 8821 dt.22.12.07, 181 dt.7.1.08, 189 dt.7.1.08,
539 dt.19.1.08, 1876 dt.4.2.08, 2544 dt.9.4.08
16.
Description of the store
item
Unit
Rate per
unit
Rs.
CONCRETE PIPE
(RCC HUME PIPE)
21.01.2009
CLASS NP2
Subject
to
validity
of
EP&M Regn.
&
VAT
clearance
certificate.
Pre-cast
re-inforced
concrete pipes suitable for
collar joint class NP2
conforming
to
IS
No.458/2003.
Diameter of the pipe
in mm
100
150
200
250
300
350
400
450
500
600
700
800
900
1000
1100
1200
Period of
validity
(Unit rate per
meter in Rs.)
92.00
117.00
145.00
173.00
229.00
269.00
306.00
365.00
414.00
580.00
760.00
934.00
1184.00
1411.00
1631.00
1887.00
Name of the rate
contract holding SSI
units
CLASS - NP2
COLLARS
Re-inforced concrete Collar
suitable for pipes of class
NP2 conforming to IS
No.458/2003.
(Unit rate per
meter in Rs.)
100
150
200
250
300
350
400
450
500
600
700
800
900
1000
1100
1200
21.00
25.00
30.00
34.00
44.00
52.00
59.00
88.00
104.00
128.00
164.00
221.00
261.00
305.00
372.00
452.00
CLASS-NP3
Pre-cast
reinforced
concrete pipes suitable for
flush
joint
Class-NP2
conforming
to
IS
No.458/2003.
(Unit rate per
meter in Rs.)
100
150
200
250
300
350
400
450
500
600
700
800
900
1000
1100
1200
CLASS-NP4
Pre-cast
reinforced
concrete pipes suitable for
flush
joint
Class-NP4
113.00
146.00
205.00
252.00
364.00
582.00
646.00
715.00
816.00
1110.00
1364.00
1774.00
2217.00
2692.00
3128.00
3604.00
(Unit rate per
meter in Rs.)
conforming
No.458/2003.
100
150
200
250
300
350
400
450
500
600
700
800
900
1000
1100
1200
to
IS
121.00
161.00
231.00
291.00
414.00
632.00
697.00
771.00
915.00
1355.00
1761.00
2285.00
2752.00
3550.00
4116.00
4766.00
1)
M/s. Krishna Cement Products, I.E., Bargarh, Pin-768028.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipe –100,150, 250, 300,350, 400, 450, 600, 900, 1000 and 1200.
NP2 Collar –100,150, 250, 300,350, 400, 450, 600, 900, 1000 and 1200.
NP3 Pipe– 250,300,350, 450, 600, 800, 900, 1000 and 1200.
NP4 Pipe – 250, 300, 350, 450, 600, 800, 900, 1000 & 1200.
2)
Balaji Spun Pipes & Industries, Dumduma, P.O. Aiginia, Bhubaneswar.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipe –100,150, 200,250, 300, 350, 400,450,500 & 600.
NP3 Pipe – 600
NP4 Pipe – 600
3)
D. P. Industries, Bidubazar, Via. Bahanaga, Dist. Balasore-756042.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300,350,400,450,500,600, 800, 900 and 1200.
NP2 Collar- 100,150,200,250,300,350,400,450,500,600, 800, 900 and 1200.
NP3 Pipes – 300, 400, 600, 900, 1000, 1200mm.
4)
Trinath Concrete Works, Kothapeta, Rayagada.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2Pipes–100,150,200,250,300,350,400,500,600,700,800,900,1000 & 1200.
NP2 Collars–100,150,200,250,300,350,400,500,600,700,800,900,1000 & 1200.
NP3 Pipes – 350,400,450, 500, 600, 700, 800, 900, 1000, 1100 & 1200.
5)
East India Concrete Products, At/P.O. Rairangpur, Dist. Mayurbhanj.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes- 100,150,250,300,350,450,500,600,700,800,900,1000 & 1200.
NP2 Collars-100,150, 200,300,350,400,500,600,700,800 and 900.
NP3 Pipes- 300,350,450, 600, 800, 900, 1000 and 1200.
NP4 Pipes- 300,350,450, 600, 800, 900, 1000 and 1200.
6)
Jyoti Concrete Products, At. Bebarta Kateni, P.O. Korian, Dhenkanal.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300,350,400,450,500,600,700,800,900,1000 & 1200
NP2 Collars – 100,150,200,250,300,350,400,450,500,600,700,800,900,1000,1100 & 1200
NP3 Pipes – 100,150,200,250,300,350,400,450,500,600,700,800,900,1000, 1100 & 1200
NP4 Pipes -100,150,200,250,300,350,400,450,500,600,700,800,900,1000, 1100 & 1200
7)
Neelachal Concrete Products (P) Ltd., At. Bampada, P.O. Chhanpur, Dist. Balasore-756056
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300,350,400,450,500,600,700,800,900,1000 & 1200
NP2 Collars –100,150,200,250,300,350,400,450,500,600,700, 800 & 900.
NP3 Pipe –300,350,400,450, 600,700,800,900,1000 & 1200
NP4 Pipes - 300,350,400,450, 600,700,800,900,1000 & 1200
8)
Geetanjali Cement Products, At. Gotidhara, P.O. Balanda, Sundargarh.
(Valid upto 22.11.2008 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 300, 450,600, 700, 800, 900, 1000 & 1200
NP3 Pipes – 300, 350, 400, 450, 600, 700, 800, 900, 1000 & 1200.
9)
Orissa Cement Art Works, At/P.O. Jhankarpalli, Sambalpur.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100,150,250,300, 400,450,500,600,700,800,900,1000, 1100 & 1200
NP3 Pipes -350,400,450,500,600,700,800,900,1000, 1100 & 1200
NP4 Pipes -350,400,450,500, 600,700,800,900,1000,1100 & 1200
10)
Hirakhand Pipes, At. Jagannath Road, P.O. Sohela, Bargarh-768028
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100, 150,200, 300,450, 600, 800, 900, 1000 & 1200.
NP2 Collars – 100, 150,200,300, 450, 600, 800, 900, 1000 & 1200.
NP3 Pipes- 350, 450, 600,800,900, 1000 &1200.
11)
Khandagiri Cement Works, P.O. Aiginia, Khandagiri, Bhubaneswar.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100,150,200,250,300, 450, 500, 600, 700, 800, 900, 1000,1100 &1200.
NP3 Pipes – 350, 450, 600, 700, 800, 900, 1000 & 1200.
NP4 Pipes – 350, 450, 600, 700, 800, 900, 1000 & 1200.
12)
Utkal Cement Products, At/P.O. Tamando, Khurda.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100,150,200,250,300,350,400,450,500,600,700,800,900 &1000.
NP2 Collars – 300, 600 & 900.
NP3 Pipes – 350,400,450,500, 600, 700, 800, 900, 1000, 1100 & 1200.
NP4 Pipes - 350,400,450,500, 600, 700, 800, 900, 1000, 1100 & 1200.
13)
Keonjhar Hume Pipe Industries, At/P.O. Ghutur, Near AIR Station, Keonjhar-751001.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700,800, 900, 1000, 1100
and 1200mm dia.
NP2 Collars – 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100
and 1200.
NP3 Pipes – 350,400,450,500, 600, 700, 800, 900, 1000, 1100 & 1200.
NP4 Pipes - 450,500, 600, 700, 800, 900, 1000, 1100 & 1200.
14)
National Cement Products, At/P.O. Dhurupada, Dist. Keonjhar-758001.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300,350,400,450,500,600,700,800,900,1000,
1000 & 1200
NP2 Collars – 100,150,200,250,300, 450,500,600,700,800,900,1000 & 1200
NP3 Pipes –350,400,450,500,600,700,800,900,1000, 1100 & 1200
NP4 Pipes -350,400,450,500,600,700,800,900,1000, 1100 & 1200
15)
Jai Jagadamba Spun Pipe, At/P.O. Jhankarpalli, Sambalpur.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100, 150, 200, 250,300, 350,400, 450,500, 600, 700, 800, 900, 1000 and 1200.
NP2 Collars – 100, 150, 200, 250,300, 350,400, 450,500, 600, 700, 800, 900, 1000 and
1200.
NP3 Pipes – 150, 200, 350, 400, 450, 500, 600, 700, 800, 900, 1000 and 1200.
NP4 Pipe - 150, 200, 350, 400, 450, 500, 600, 700, 800, 900, 1000 and 1200.
(Valid upto 4.12.2006 subject to validity of EPM Registration & VAT clearance Certificate)
16)
Laxmi Cement Products, At. Badadohar, P.O. Khariar, Dist. Nuapada.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 600
NP3 Pipes – 350, 450, 600, 900, 1000 and 1200.
(Valid upto 16.08.2006 subject to validity of EPM Registration & VAT clearance Certificate)
17)
Maruti Cement Products, At. Eheraguda, P.O.-Pitamahal, Dist: Rayagada-765002.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300,350,400,450,500, 600,700,900,1000, 1100 & 1200
NP2 Collars –100,150,200,250,300,350,400,450,500, 600,700, 900,1000, 1100 & 1200
NP3 Pipes- 300,350,400,450,500, 600,700,800,900,1000, 1100 and 1200
(Valid upto 21.01.2009 subject to validity of EPM Registration & VAT clearance Certificate)
18)
Maa Santoshi Concrete Products, At. Subarnapur, P.O. Malatigunderpur, Dist. Sambalpur.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300, 450, 600, 900 & 1200
NP3 Pipes- 300,350, 450, 600, 900,1000 and 1200
(Valid upto 23.08.2006 subject to validity of EPM Registration & VAT clearance Certificate)
19)
Navajyoti Spunpipe Industry, At. Ralaba, P.O. Rangipur, Via. Berhampur, Ganjam.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes -100,150,200,250,300,350,400,450,500,600,700,800,900,1000,1100 and 1200.
NP3 Pipes – 100,150,200,250,300,350, 400, 450, 500, 600, 700, 800, 900, 1000, and 1200.
(Valid upto 04.12.2006 subject to validity of EPM Registration & VAT clearance Certificate)
20)
Kunal Spun Pipe, Mundher, N.H.-42, Sambalpur.
(Valid upto 07.05.2008 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipe –100,150, 200, 250, 300,350, 400, 450,500, 600, 700, 800, 900, 1000 and 1200.
NP2 Collar –100,150,200, 250, 300,350, 400, 450,500, 600, 700, 800, 900, 1000 and
1200.
NP3 Pipe– 100, 200, 300,350,400, 450, 500, 600, 700,800, 900, 1000 and 1200.
NP4 Pipe – 100, 200, 300, 350, 400, 450, 500,600,700, 800, 900, 1000 & 1200.
(Valid upto 04.12.2006 subject to validity of EPM Registration & VAT clearance Certificate)
21)
Sri Laxmi Concrete Works, At. Viranarayanpur Road, P.O. Kothapeta, Rayagada.(Annual
Production Capacity-3000 nos.)
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes – 100,150,200,250,300,400,500,600,700,800,900,1000, 1200.
NP2 -Collars 300,400,500,600,700,800,900,1000 and 1200
NP3 Pipes – 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 & 1200.
22)
23)
Panda Hume Pipes, At. Aruapalli, P.O.Gaunju, Berhampur,Ganjam-761002
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP3 Pipes- 350, 450, 600, 800, 900, 1000 and 1200
Chandrama Cement Products, Jolko, At/P.O. Utkela, Dist. Kalahandi.
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200, 400,450,500,600,700,800,900,1000 & 1200
NP2 Collars –150,200, 300, 400,450,500,600,700,800,900,1000 & 1200
NP3 Pipes – 350,400,450, 600,700,800,900,1000, 1100 & 1200
24)
25)
Amulya Cement Products, Nuakote, Maidalpur,Nabarangpur
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes-100,150,250, 300,450, 600, 900, 1000 & 1200.
NP3 Pipes – 450, 600, 900, 1000 and 1200
NP4 Pipes – 350, 450, 600, 900 and 1200.
Bishnu Enterprisers, 30, Pani Market Complex, Uditnagar, Rourkela-769012,
Dist:Sundergarh
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
26)
NP2 Pipes –100,150,200,250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200
NP3 Pipes – 100,150,200,250,300,350,400,450, 500,600,700,800,900,1000, 1100 & 1200
Kalinga Concrete Products(P) Ltd., Lanjipalli Road, Berhampur, Dist: Ganjam
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,250,300,450,500,600,800,900,1000,& 1200
NP3 Pipes – 350,450, 600,800, 900,1000& 1200
27)
Bhubaneswar Spun & Cement Works, At-Kusum Khunti, P.O.-Dangriduda, Dist:
Kahalandi
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes –100,150,200,250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200
NP2 Collars –150,200, 250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200
NP3 Pipes – 100,150,200,250,300,350,400,450, 500,600,700,800,900,1000, 1100 & 1200
28)
Konark Spun Pipes & Co., Kundraguda, P.O.-Anchala, Via-Borigumma-764056,
Dist:Koraput
(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)
29)
NP2 Pipes –100,150,200,250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200
NP2 Collars –100,150,200, 250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200
NP3 Pipes – 350,400,450, 500,600,700,800,900,1000, 1100 & 1200
Arati Cement Products, At: Onelliamal. P.O.-Karlapada, Dist:Kalahandi
(Valid upto 25.09.2008 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes-300,450, 600, 900, 1000 & 1200.
NP3 Pipes – 350,450, 600, 800, 900, 1000 and 1200
NP4 Pipes – 350, 450, 600,800, 900,1000 and 1200.
30)
Thakur Cement Products, At-Dhurkuti, P.O.-Santapur, Dist:Kalahandi
(Valid upto 13.11.2008 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes-300,350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 & 1200.
NP3 Pipes – 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200
NP4 Pipes 600, 700, 800, 900, 1000, 1100 and 1200.
NP2 Collars –300,350, 400,450,500,600,700,800,900,1000,1100 & 1200
31)
Wesix Hume Pipe Industries Pvt. Ltd., Baripada-757001, Mayurbhanj (Valid upto
21.01.2009 subject to validity of EP&M & VAT clearance certificate)
NP2 Pipes-100,150, 250, 300, 350, 400, 450, 600, 800, 900, 1000& 1200.
NP3 Pipes – 300, 350, 450, 600, 800, 900, 1000and 1200
NP4 Pipes 600, 700, 800, 900, 1000, 1100 and 1200.
NP2 Collars –300, 350, 450, 600, 800, 900, 1000 & 1200
32)
Maruti Cement Product, At/P.O.-Khariar, Dist: Nuapada (Valid upto 21.01.2009 subject to
validity of EP&M & VAT clearance certificate)
NP2 Pipes-100,150, 200, 250, 300,350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 &
1200.
NP3 Pipes – 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200
NP2 Collars –100, 150, 200, 250, 300,350, 400,450,500,600,700,800,900,1000,1100 &
1200
33)
Jaya Durga Spun Pipes, At/P.O.-Madhapur, Dist: Boudh (Valid upto 21.01.2009 subject to
validity of EP&M & VAT clearance certificate)
NP2 Pipes-100, 150, 200, 250, 300, 400, 450, 600, 700, 800, 900, 1000, 1100 & 1200.
NP3 Pipes –350, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200
NP2 Collars –100, 150, 200, 250, 300, 400,450,600,700,800,900,1000,1100 & 1200
NAME OF R/C HOLDERS :
2. Krishna Cement Products, I.E., Bargarh, Pin-768028.(Annual Production Capacity-12,000 nos.
as per the DIC PMT Regn. Certificate)
3. Balaji Spun Pipes & Industries, Dumduma, P.O. Aiginia, Bhubaneswar. .(Annual Production
Capacity-Rs.7,68,000/- as per the DIC PMT Regn. Certificate)
4. D. P. Industries, Bidubazar, Via. Bahanaga, Dist. Balasore-756042. .(Annual Production
Capacity-6600 mtrs. as per the DIC PMT Regn. Certificate)
5. Trinath Concrete Works, Kothapeta, Rayagada. .(Annual Production Capacity-15000 mtrs, 9000
nos. as per the DIC PMT Regn. Certificate)
6. East India Concrete Products, At/P.O. Rairangpur, Dist. Mayurbhanj. .(Annual Production
Capacity-11400 mtrs. as per the DIC PMT Regn. Certificate)
7. Neelachal Concrete Products (P) Ltd., At. Bampada, P.O. Chhanpur, Dist. Balasore756056.(Annual Production Capacity-9000 sfts. as per the DIC PMT Regn. Certificate)
8. Geetanjali Cement Products, At. Gotidhara, P.O. Balanda, Sundargarh. .(Annual Production
Capacity-5,000 nos. as per the DIC PMT Regn. Certificate)
9. Orissa Cement Art Works, At/P.O. Jhankarpalli, Sambalpur. .(Annual Production Capacity-6000
nos. as per the DIC PMT Regn. Certificate)
10.
Hirakhand Pipes, At. Jagannath Road, P.O. Sohela, Bargarh-768028.(Annual Production
Capacity-20,000 mtrs. as per the DIC PMT Regn. Certificate)
11.
Khandagiri Cement Works, P.O. Aiginia, Khandagiri, Bhubaneswar. .(Annual Production
Capacity-Rs.40,65,000/- as per the DIC PMT Regn. Certificate)
12.
Utkal Cement Products, At/P.O. Tamando, Khurda. .(Annual Production Capacity-9450
mtrs. as per the DIC PMT Regn. Certificate)
13.
Keonjhar Hume Pipe Industries, At/P.O. Ghutur, Near AIR Station, Keonjhar-751001.
.(Annual Production Capacity-8700 nos. as per the DIC PMT Regn. Certificate)
14.
Konark Spun Pipe & Co., Kundraguda, P.O. Anchala, Near Boriguma, Koraput – 764056.
.(Annual Production Capacity-24940 pairs as per the DIC PMT Regn. Certificate)
15.
Bishnu Enterprises, Plot No.17, I.A., Kalunga, Sundargarh. .(Annual Production Capacity37,500 metres as per the DIC PMT Regn. Certificate)
16.
Kalinga Concrete Products (P) Ltd., Lanjipalli Road, Berhampur. .(Annual Production
Capacity-1100 M.T. as per the DIC PMT Regn. Certificate)
17.
National Cements Products, At/P.O. Dhurupada, Dist. Keonjhar. .(Annual Production
Capacity-Rs.24,00 lakh as per the DIC PMT Regn. Certificate)
18.
Jai Jagadamba Spun Pipe, At/P.O. Jhankarpalli, Sambalpur. .(Annual Production Capacity12,000 MT as per the DIC PMT Regn. Certificate)
19.
Laxmi Cement Products, At. Badadohar, P.O. Khariar, Dist. Nuapada. .(Annual Production
Capacity-15000 mtrs as per the DIC PMT Regn. Certificate)
20.
Maa Santoshi Concrete Products, At. Subarnapur, P.O. Malatigunderpur, Dist. Sambalpur.
.(Annual Production Capacity-12,000 nos. as per the DIC PMT Regn. Certificate)
21.
Navajyoti Spunpipe Industry, At. Ralaba, P.O. Rangipur, Via. Berhampur, Ganjam. (Annual
Production Capacity-6400 nos. as per the DIC PMT Regn. Certificate)
22.
Kunal Spun Pipe, Mundher, N.H.-42, Sambalpur. .(Annual Production Capacity-750 MTas
per the DIC PMT Regn. Certificate)
Maruti Cement Products, At.Beheraguda, P.O. Pitamahal, Rayagada. .(Annual Production
Capacity-6000 sets. as per the DIC PMT Regn. Certificate)
23.
24.
Sri Laxmi Concrete Works, At. Viranarayanpur Road, P.O. Kothapeta, Rayagada. .(Annual
Production Capacity-3,000 nos. as per the DIC PMT Regn. Certificate)
25.
Panda Hume Pipes, At. Aruapalli, P.O.Gaunju, Berhampur, Ganjam-761002. (Annual
Production Capacity-2,000 nos. as per the DIC PMT Regn. Certificate)
26.
Bhubaneswar Spun Pipes Cement Works, Kusumkhunti, Dangriguda, Dist. Kalahandi.
.(Annual Production Capacity-89587 mtrs. as per the DIC PMT Regn. Certificate)
27.
Chandrama Cement Products, Jolko, At/P.O. Utkela, Dist. Kalahandi. .(Annual Production
Capacity-Rs.10,00,000/- as per the DIC PMT Regn. Certificate)
28.
Amulya Cement Products, Nuakote, Maidalpur, Nabarangpur.(Annual Production Capacity6000 nos. as per the DIC PMT Regn. Certificate)
Jyoti Concrete Products, At. Bebarta Kateni, P.O. Korian, Dhenkanal.
Arati Cement Products, At: Onelliamal, P.O.: Karlapada, Dist: Kalahandi. (Annual
Production Capacity-3600 nos. as per the DIC PMT Regn. Certificate)
Thakur Cement Products, At-Dhurkuti, P.O.Santapur, Dist: Kalahandi.(Annual Production
Capacity-7200 MTR. as per the DIC PMT Regn. Certificate)
Wesix Hume Pipe Industries Pvt. Ltd., Baripada-757001, Mayurbhanj
Maruti Cement Product, At/P.O.-Khariar, Dist: Nuapada
Jaya Durga Spun Pipes, At/P.O.-Madhapur, Dist: Boudh. (Annual Production Capacity- Rs.
20, 00,000- & Rs.45, 00,000/-as per the DIC PMT Regn. Certificate)
29.
30.
31.
32.
33.
34.
35.
TERMS OF DELIVERY & TAXES :
1) The above rates are ex-factory and exclusive of Orissa entry tax and value added tax which may
be charged extra as admissible, if any.
2) Breakage of 4% or as the case may be, in case of actual testing of pre-cast reinforced concrete
pipes may be borne by the indenting authority.
3) The delivery period may be mutually decided between the rate contract holding SSI units and the
indenting officer.
RATE CONTRACT CIRCULAR NO. 602 dt.22.01.2008, 1044 dt.06.02.2008
17.
Description of the store
item
COPPER CHOKE
Ballast (Choke Coil) copper
wire wound for use in 240
Volts, 50Hz A.C. supply for
fluorescent tubular lamps
of the 40W and 20W rated
wattage and conforming to
IS:1534
(Pt.I)/77
with
Amendment No.1.
Unit
Per each
Rate per unit
Rs.
100.00
Period of
validity
28.10.2008
from the date of
issue of the
circular
(Subject
to
validity
of
EP&M
Regn.
Certificate)
The ballast shall be so
designed and constructed
that in normal use their
performance is reliable
and without danger to the
user or surrounding. They
shall
be
mechanically
robust and shall be so
designed and constructed
as to with stand the
change of temperature and
moisture
in
the
surrounding. All exposed
metal points shall either
be constructed of nonerrus
material
or
adequately
protected
against
corrosion.
Adequate robust means of
fixing shall be provided to
ensure
satisfactory
mechanical and thermal
contact with the surface in
which they are mounted.
Name of the rate contract
holding SSI units
1. Standard Point
Electronics, At.
Gobardhanpur, P.O.
Gada Damodar Palli,
Via. Dharakot, Dist.
Ganjam.
(Annual production
capacity as mentioned in
the DIC PMT Certificate is
Rs.2,00,000/2. Blue Circle Instruments,
Shed No.32, I.E.,Rasulgarh,
Bhubaneswar
(Annual Production
Capacity – 6000 nos.
Rs.13.20 lakhs)
TERMS 0F DELIVERY AND TAXES :
1. The rate is ex-factory inclusive of cost of packing, exclusive of VAT may be charged extra, as
admissible, if any.
2. The delivery schedule may be mutually decided between the contractor and the indenting officer.
RATE CONTRACT CIRCULAR NO. 7680 Dt.29.10.2007,253 dt.8.1.08
18.
Description of the store
item
Unit
Rate per unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
COTTON TAG
The cotton yarn shall be
three fold yarn, white
colour
lace
shall
be
without
cores
and
minimum 32 twists per
decimeter. Both ends of
the lace shall be provided
with tags of metallic sheet
of not less than 25mm
length with tapering ends.
The metallic portions must
be free from rust, cracks
and other surface defects.
The metallic portion of the
tags
shall
be
plated
chromium over nickel;
length of the lace portion
shall be 175mm. The lace
portion
of
the
tag
(excluding metal) shall
weight minimum 0.80 g.
for 100 cm. length. The tag
shall conform to the
requirement
of
IS:
8499/88. The lace shall be
round
and
uniformly
twisted and pieces shall
not come out in normal
use.
Per
bundle
i.e. 100
nos. of
tags
shall be
tied
together with
elast-ic
cord at
both the
ends in
the form
of bundle.
7.70
22.06.2008
(Extension vide
circular No.113
dt.4.1.08)
1. B. K. Products, S.E.12, I.E., Cuttack-10.
TERMS OLF DELIVERY & TAXES :
1. The rate is ex-factory, exclusive of excise duty, Orissa entry tax and value added tax (VAT) which
may be charged extra as legally leviable, if any.
2. The delivery schedule may be mutually decided between the contractor and the indenting officer.
RATE CONTRACT CIRCULAR NO. 3175 dt.23.06.2006
19.
Description of the store
item
CRESOL
WITH
SOAP
SOLUTION IP
Cresol with Soap Solution
IP
Unit
450 ml.
in
Amber
Glass
Bottle
Rate per unit
Rs.
44.26
Period of
validity
19.02.2008
Name of the rate contract
holding SSI units
1) I.D.D. (P) Ltd., I. E.,
Madhupatna,
Cuttack-10
2) Surgiplast India,
Main Road,
Kukudakhandi,
Ganjam.
TERMS OF DELIVERY & TAXES :
1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax which may be
charged extra as admissible if any.
2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations
charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of
one year from the date of issue of rate contract.
3.The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
RATE CONTRACT CIRCULAR NO. 1209 dt.20.2.2007, 1388 dt.23.2.07
20.
Description of the store
item
DIRECT ACTION HAND
PUMP CONFORMING TO
IS:14106/96.
ISI Marked Direct action
hand pump consisting of
1) Cylinder Assembly, 2)
Pump Head Assembly, 3)
Retrieving Rod Assembly,
Rising
Main
&
Combinations
Spanner
suitable
for
tube-well
assembly consisting of
upper casing, lower casing
and well screen assembly
conforming
to
IS
Specification No.14106/96
with subsequent amendment, if any, for the depth
of 40 metres.
Marking
Unit
Rate per unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
24.3.2008
Rate per
set
7,012.00
For a period of
one year from
25.09.2006 to
24.09.2007
(subject
to
validity of EPM
Regn.
certificate, VAT
clearance
certificate and
BIS licence)
The pump head cylinder and other components of the pump shall be
marked as under
1)
The pump head shall have a name plate with the name of the
manufacturer and serial number of pump.
2)
The head flange, intermediate flange and the stand flange shall
have steel punch impression of manufacturers identification
mark, deep enough to be visible after galvanizing.
3)
All unplasticised PVC pipes including cylinder pipe shall be
clearly and indelibly marked (Preferably screen printed) with the
following:a) Manufacturer’s identification mark.
b) Name of the component
c) Batch No. which can be co-related with production /internal
quality records.
Packing:
All the materials are to be duly packed as per I.S. No.14106/96 and
subsequent amendment if any to withstand road transit at the suppliers
cost and risk.
1) Oriplast Ltd.,
O.T. Road, Balasore.
TERMS OF DELIVERY & TAXES :
•
•
•
The rate is ex-factory inclusive of excise duty, packing charges but exclusive of inspection
charges, VAT and entry tax which may be charged extra, as applicable, if any. The indenting
authority should ensure valid BIS licence of the store item at the time of purchase.
Inspection of the store item will be conducted by B.I.S. Inspection of CIPET may be made at the
instance of indenting officers, if necessary.
Minimum time to be allowed for delivery of goods will be mutually decided by the indenting
officer and the contractor.
RATE CONTRACT CIRCULAR NO. 4844 dt. 25.09.2006, 6811 dt.23.12.06, 2108 dt.19.3.07, 7463
dt.15.10.07
21.
Description of the store
item
D.M.S. ANKLE BOOT:
(BLACK)
Unit
Type-I conforming to IS
No.11226/93 (As per detail
specification furnished by
Orissa Police attached at
Annexure ‘A” from Page 4
to 9)
Per
Pair.Exfactory
inclusive
of cost
of
packing
Rate per unit
Rs.
Period of
validity
336.00
3.6.2008
Name of the rate contract
holding SSI units
1.
Venus Shoes &
Leather Products,
At/P.O. Rasulgarh,
Bhubaneswar-10.
2.
New Steps, Old
Station Road,
Rourkela-1
3.
Meher Footwear
Industries,
Sergiguda, Titilagarh,
Bolangir.
4. Baba Enterprises,
Plot No.92,
Shaktinagar, Link
Road, Cuttack753012
ANNEXURE-A.
SPECIFICATION TAKEN FROM IS: 11226/93 FOR
DMS ANKLE BOOT (BLACK) TYPE-I
1. Scope:- This specification covers the requirements of Orissa Police and the requirements of
material quality and their sizes to be used in different components and manufacture, in line with
the similar products prescribed by Bureau Indian Standards.
Table 1
Shape, Design & Pattern
The DMS Ankle Boot Type-I shall be made out of Black/jug grain Chrome upper leather unlined
but plain toe cap and counter, without steel toe cup, loose below tongue and two nos. of metal rivets
fitted at the corners of quarters to secure it firmly to the vamp, cotton lace and jug loop at the back
strap, sole should be rubber sole, direct moulded as per IS: 11226/1993. The foot-wear shall be made
by vulcanizing or direct moulding process. The moulded rubber sole and heel in the finished boots shall
have an anti-slip design as per fig.2 of IS: 11226/93. It shall be free from visible defects, such as
blowholes, cuts, cracks, cavities, flash and spew. The boot shall be provided with full socks. The boot
shall be Ankle high with extra reinforcement in the quarter where the eyelets fitted and made riveted
and stitched.
Size: As per the requirements of Purchaser.
Materials: The DMS Ankle boot (Black) shall be manufactured with the following materials.
a. Upper Leather: Full Chrome leather black printed conforming to IS: 5677/1986.
b. Toe cap and counter: Full chrome black plain leather confirming to IS:
5677/1986.
c. Toe puff and stiffener: Toe puff and stiffener material shall be vegetable tanned
sole leather splits conforming to type-I of IS: 7554/1974.
d. Insole material: Leather board conforming to IS: 5867/1970 shall be used.
e. Shocks: Pigments splits leather.
f.
Bottom Materials : Rubber sole and heel shall confirm to IS: 11226/93, Table-I
Thread :
Upper closing – Rot proof cotton sewing threads variety No.35 is conforming to IS: 1720/1978.
OR Nylon thread of 5 ply may be used subject to agreement between the manufacturer and purchaser.
Laces: Fabric laces or Nylon laces – colour matching with colour of upper leather shall be provided. The
length shall be 90 ± 5 cm conforming to IS:4778/1982.
Tape – Cotton tape size – 19 ±1 mm, width variety No.8 of 1895/1982.
Grinderies :
a) Eyelets: Aluminium or steel eyelets, conforming to IS: 5041/1978 shall be used.
b) Lasting tack: Mild steel rust proof tacks, size 12 mm ± 1mm and 10mm ± 1mm.
c) Shank: Iron shanks conforming to Type-I of IS: 10945/1984 shall be used.
d) Bifurcated rivets: Bifurcated rivet size 8 mm (5/16”) to be fitted at the corner of quarter to secure
it firmly to the vamp.
e) Toe compound: Gum glue or latex based hard setting cement compound shall be used.
A) Thickness of leather components
Thickness
i) Vamp
ii)Quarters
iii)Toe cap & outside counter and jugloop
iv)Tongue
v)Full socks
vi)Insole
vii)Toe puff & Stiffener
B) Direct moulded rubber sole (finished):
Minimum
1.5mm
1.5 mm
1.2mm
1.0mm
0.8mm
2.5mm
2.0 mm
Component
Material
i) At fore part Rubber
ii)At Waist
-doiii)Heel (finished)
-doiv)Heel filler
Pulp or fibre board
or light wood
Thickness mm
14.0 ±1
9.0 ± 1
35.0 ± 1
10.00
MANUFACTURE: DMS Ankle Boot.
Upper stitching: The number of stitches shall be 20-25 per decimeter and in two rows, about 3 mm
apart, on the toe caps and counter and two rows about 5 mm apart on sides. The distance between the
two rows of stitching at the quarter facing shall not exceed 2mm. The first row of stitching – shall be
approx. 3mm from the edge of the quarter facing. All loose ends of threads shall be properly secured.
The back seams of the quarters shall be reinforced with a NEWAR. The joined top of the quarter shall be
strengthened by means of 25±1 mm wide Leather strap at the back. The counter shall be turned over
within 15mm at the top of the leg so as to form a Jugloop, six eyelets shall be fitted equidistantly in
each face, each eyelets being properly clenched without any distortion.
Height of Leg: 150±2mm for size-8, shall increase or decrease by 2mm from size to size.
Marking: Size and supplier’s name/trade mark shall be incorporated in the mould so as to make them
legible on the waist of out sole.
IS:11226/1993
Indian Standard
LEATHER SAFETY FOOTWEAR HAVING DIRECT MOULDED
RUBBER SOLE SPECIFICATION (FIRST REVISION)
1. SCOPE: This standard prescribes the requirements, methods of sampling and tests for leather
safety footwear having steel toe caps and direct moulded rubber soles.
2. REFERENCES: The Indian Standards listed in Annex-A are necessary adjuncts to this standard.
3. TERMINOLOGY: For the purpose of this standard, the definition given in IS:2050 : 1991 shall
apply.
4. TYPES: The leather safety footwear having direct moulded rubber soles, shall be of following
three types depending on their design.
Type 1
Type 2
Type 3
Ankle boots
Jodhpuri Shoes
Derby Shoes
However such footwear with modified design may also be made as agreed to the purchaser and the
manufacturer.
5.
REQUIREMENTS:
Leather safety footwear namely, Ankle boot, Derby Shoe pattern or Jodhpuri Shoe pattern
5.2.1
5.2.2
5.2.3
5.2.4
or similar designs other than these, as agreed to between the manufacturer and the
purchaser, shall be made from chrome tanned upper leather with cleated soles and heals
with slip-resistant pattern by direct vulcanizing or by direct moulding process.
Materials.
Upper Leather: For upper, full chrome leather conforming to IS: 5677 : 1986 shall be
used.
Unless otherwise specified, the leather shall be black or brown and printed with pebble
grain or any print agreed to between the purchaser and the manufacturer.
Insole Material: Leather board conforming to IS:5867/1970 shall be used, Chrome fibre
board (reconstituted) may also be used if agreed to between the purchaser and the
manufacturer.
Stiffener: Stiffener material shall be vegetable tanned sole leather splits conforming to
Type 1 of IS: 7554/1974.
Lining Material: Lining leather conforming to Type-1 or Type 3 of IS : 3840/1979 shall be
used.
NOTE–While checking the conformity of upper leather, stiffener material and lining leathers to be
relevant standards mentioned under 5.2.1, 5.2.3 and 5.2.4 respectively, the sampling
shall be done in accordance with IS : 5868/1983.
5.2.5 Threads: Rot-proof cotton sewing threads variety No.35 conforming to IS : 1720/1978 and
rot-proof linen thread complying with the requirements given in Annex B shall be used for
stitching of upper. The colour of thread used shall be as agreed to between the purchaser
and the manufacturer.
5.2.6
Grinderies
5.2.6.1 Lasting tacks : Mild steel, rust proof, 12.0 ± 1 mm and 10.0 ± 1 mm long lasting tacks shall
be used.
5.2.6.2 Shanks : Iron shanks conforming to Type-1 of IS : 10945 : 1984 shall be used. Where the
outer sole design provides equal bridging support, shanks may not be used. An
illustration of such a sole design is given in Fig.1. However any other design of sole with
in-built bridging support may also be used.
5.2.6.3 Eyelets : Aluminium or steel eyelets conforming to size (collar diameter) 10 of Table-1 of IS
: 5041/1978 shall be used.
Table 1 : Requirement of Direct Moulded Rubber Sole and Heels (Clause 5.2.1.1)
Sl.
No.
1
i
ii
iii
iv
v
vi
NOTES:
Characteristic
2
Relative density, Max
Hardness, Shore A,
Tensile strength, MPa, Min
Flexing resistance
a) Number of cycles for initial
crack, Min
b) Cut growth at the end of 1 20 000
cycles, percent, Max
Change in initial hardness, Shore A, after
ageing at 100±1ºC for 24 h
Elongation at break, percent, Min
Requirement
3
1.30
70±5
10.5
Method of Test,
Ref. to IS:
4
3400 (Part-9):1978
3400 (Part-2):1980
3400 (Part-1):1987
60 000
400
+5
250
3400 (Part-4):1987 and
3400 (Part-2):1980
3400 (Part-1): 1987
1. If the heels are compounded from same mix of soles, then it may not be tested for Sl.
No.(iv) and (vi)
2. Reading from 30 to 95 in shore durometer. Type A are approximately same as
those in IRHD.
TERMS OF DELIVERY & TAXES :
1) The rate is ex-factory inclusive of cost of packing, exclusive of Orissa entry tax and VAT which
may be charged extra, as admissible, if any.
2) Time allowed for delivery of goods:
a) Orders upto Rs.5000.00
…
30 days
b) Orders upto Rs.5000.00 to Rs.10,000.00..
45 days.
c) For every subsequent of Rs.5000.00
…
15 days.
RATE CONTRACT CIRCULAR NO. 3572 dt.4.6.07,4237 dt.2.7.07
22.
DRUGS & MEDICINES –
25 ITEMS.
1. Benzyl
Benzoate
Application IP 25%
W/V
450 ml. in
Amber
Glass
Bottle 20
bottles per
box
510.20
21.2.2008
1. Chemie (India), I.E.,
Cuttack.
2. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack.
3. Bubuna Chemicals,
D-2/2, New I.E.,
Jagat-pur, Cuttack
4. Novo Pharmaceuticals Pvt. Ltd., I.E.,
Cuttack-10.
5. Bharat Salt &
Chemical Indus-tries
Ltd., Nayasarak,
Cuttack-2.
6. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
7. Eastern India
Pharmaceutical
Laboratory, B-22,
I.E., Bhubaneswar.
8. I.D.D. (P) Ltd., I.E.,
Cuttack
9. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack.
10. Surgiplast (India),
Station Road,
Berhampur
11. Bijoy Surgicals &
Chemicals, Plot No.
120, New I.E.,
Jagatpur, Cuttack
12. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10.
(Twelve units only).
2. Tab.
Chlorophenaramine maleate
4 mg. IP.
10 Tab. in
strip
10 strip in
5.48
CB Box
3. Tab.
Chloroquine
Phosphate IP 250
mg (Coated.)
10 Tabs.
per strip
10 Strip
per box.
29.55
1. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack
2. Bharat Salt & Chemical
Industries Ltd., Nayasarak,
Cuttack-2
3. Jagannath Chemical &
Pharmaceutical Works (P)
Ltd., Nayasarak, Cuttack
4. Kingsy Pharmaceutical
Works, I.E., Mancheswar,
Bhubaneswar
5. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
6. Swaraj Chemical &
Pharmaceutical Works, New
I.E., Jagatpur, Cuttack
7.Phyto Pharmaceuticals (P)
Ltd., I.E., Jagatpur, Cuttack.
8. Universal Chemical &
Pharmaceutical Industries,
I.E., Jagatpur, Cuttack.
9. Eastern Chemical
Industries Pvt. Ltd., I.E.,
Cuttack-10.
(Nine Units only).
1. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack.
2. Bharat Salt & Chemical
Industries Ltd., Nayasarak,
Cuttack-2.
3. Jagannath Chemical &
Pharmaceutical Works (P)
Ltd., Nayasarak, Cuttack
4. Eastern Chemical
Industries Pvt. Ltd., I.E.,
Cuttack-10.
5. Kingsy Pharmace-utical
Works, I.E., Mancheswar,
Bhubaneswar
6. Panacea (P) Ltd.,
184/185, New I.E.,
4.Tab. Diazapam IP 5 mg.
4. (a) Tab. Diethyle
Carbamazine Citrate IP 100 mg.
(Aluminium foil).
10 Tabs.
in strip.
10 strips
in CB
Box.
10 Tabs.
in strip.
10 strips
in CB
Box.
7.00
Jagatpur, Cuttack
7. Novo Pharmaceuticals
Pvt. Ltd., I.E., Cuttack-10.
8. Monday Medicines,
Jaleswar, Balasore
9. Eastern Chemical
Industries Pvt. Ltd., I.E.,
Cuttack-10
( Nine units only)
14.70
1. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack
2.Kingsy Pharmaceutical
Works, I.E., Mancheswar,
Bhubaneswar.
( Two units only )
5(b)
Tab.
Diethyle
Carbamazine Citr-ate
IP 50 mg (Aluminium
foil)
6.Tab.
Dried
Al.
Hydroxide 250 mg +
Magnesium Hydroxide
10 Tabs.
in strip.
10 strips
in CB
Box.
10 Tabs.
in strip.
10 strips
10.80
1. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack
2. Bhart Salt & Chemical
Industries Ltd., Nayasarak,
Cuttack-2.
3. Jagannath Chemical &
Pharmaceutical Works (P)
Ltd., Nayasarak, Cuttack
4. Swaraj Chemical &
Pharmaceutical Works, New
I...E., Jagatpur, Cuttack
5. Phyto Pharmaceuticals (P)
Ltd., I.E., Jagatpur, Cuttack
6. Universal Chemical &
Pharmaceutical Industries,
I.E., Jagatpur, Cuttack
7. Novo Pharmaceuticals
Pvt. Ltd., I.E., Cuttack-10.
( Seven units only)
13.26
1. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack
2. Universal Chemical &
Pharmaceutical Industries,
I.E., Jagatpur, Cuttack
3. Novo Pharmaceuticals
250 mg + methyle
polysiloxane 50 mg
NFI.
Pvt. Ltd., I.E., Cuttack-10
4. Eastern Chemical
Industries Pvt. Ltd., I.E.,
Cuttack-10
in CB
Box.
( Four Units only).
7.
Syp.
Diethyle
Carbamazine Cit-rate
IP 50mg/ 5ml.
450 ml.
A.G.
Bottle 20
bottles per
box
8.Cap. Doxycycline IP
100 mg. (Aluminium
foil.)
10 Caps
in strip.
10 strips
in CB
Box.
356.85
61.49
1. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack
2. Kingsy Pharmaceutical
Works, I.E., Mancheswar,
Bhubaneswar
3. Swaraj Chemical &
Pharmaceutical Works, New
I.E., Jagatpur, Cuttack
4. Bharat Salt & Chemical
Industries Ltd., Nayasarak,
Cuttack5. Novo Pharmaceuticals
Pvt. Ltd., I.E., Cuttack-10
6. Jagannath Chemical &
Pharmaceutical Works (P)
Ltd., Nayasarak, Cuttack
7. Phyto Pharmaceuticals (P)
Ltd., I.E., Jagatpur, Cuttack
8. Eastern Chemical
Industries Ltd., I.E.,
Cuttack-10
( Eight units only )
1. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack.
2. I.D.D. (P) Ltd.,
Madhupatna,
Cuttack-10.
( Two units only)
1. Universal Chemical &
Pharmaceutical Industries,
I.E., Jagatpur, Cuttack
2. I.D.D. (P) Ltd.,
Madhupatna, Cuttack-10
3. Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack
4. Jagannath Chemical &
9.Tab. Frusemide IP 40
mg.(Aluminium foil)
10 Tabs.
Per strips
in
Aluminiu
m Foil, 10
strips in
C.B.Box
17.19
10.Tab. Furazo-lidon IP
100
mg.(aluminium
foil)
10 Tabs.
in strip.
10 strips
Aluminiu
m Foil in
CB Box
14.24
Pharmaceutical Works (P)
Ltd., Nayasarak, Cuttack
5. Phyto Pharmaceuticals (P)
Ltd., I.E., Jagatpur, Cuttack
6. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
7. Kingsy Pharmaceutical
Works, I.E., Mancheswar,
Bhubaneswar
8. Eastern Chemical
Industries Ltd., I.E.,
Cuttack-10
( Eight units only)
1. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack.
( One units only )
11.Tab. Ibuprofen IP
400 mg. (Coated).
10 Tabs.
in strip.
10 strips
in CB Box
32.40
1.Bubuna Chemicals, D2/2, New I.E., Jagatpur,
Cuttack.
2.Kingsy Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar.
3. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
4. Novo Pharmaceuticals Pvt. Ltd., I.E.,
Cuttack-10
5. Jagannath Chemical
& Pharmaceutical Works
(P) Ltd., Nayasarak,
Cuttack
6. Bharat Salt &
Chemical Industries Ltd.,
Nayasarak, Cuttack-2
7. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack
8. Eastern Chemical
Industries Ltd., I.E.,
Cuttack-10
(Eight units only)
12.Tab.
Mebendazole
IP
100
mg.
(Aluminium Foil)
6 Tab. in
strip
10 strips
aluminiu
m foil in
CB Box
9.00
1. Bubuna Chemicals,
D-2/2, New I.E.,
Jagatpur, Cuttack.
2. Bhart Salt &
Chemical Industries
Ltd., Nayasarak,
Cuttack-2.
3. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
4. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar
5. Swaraj Chemical &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack.
6. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack.
7. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
8. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack
9. Eastern Chemical
Industries Ltd., I.E.,
Cuttack-10.
( Nine Units only)
13.(a) Tab. Metronidazole IP 400 mg.
(Coated)(Aluminium
10 Tabs.
in strip.
10 strips
39.50
1. Bubuna Chemicals,
D-2/2, New I.E.,
Jagatpur, Cuttack.
2. Novo Pharmaceuticals Pvt. Ltd., I.E.,
Cuttack-10.
3. Bharat Salt &
Chemical Industries
Ltd., Naya Sarak,
Cuttack.
4. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Foil)
13.(b) Tab. Metronidazole IP 200 mg.
(Coated)(Aluminium
foil)
Nayasarak, Cuttack.
5. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar.
6. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
7. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack
8. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack.
9. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack.
10. Monday Medicines,
Jaleswar, Balasore.
(Ten units only)
in
aluminiu
m foil in
CB Box
10 Tabs.
in strip in
Aluminiu
m Foil,
10 strips
in CB Box
21.28
1. Bubuna Chemicals,
D-2/2, New I.E.,
Jagatpur, Cuttack.
2. Bharat Salt &
Chemical Industries
Ltd., Naya Sarak,
Cuttack.
3. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
4. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar
5. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack
6. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack
7. Monday Medicines,
Jaleswar, Balasore
8. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack
9. Novo Pharmaceuticals
Pvt. Ltd., I.E.,
Cuttack-10
10. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
11. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10.
( Eleven Units only)
14.Mercurochrome
Solution 2% NFI.
450 ml in
A.G. bottle
20 bottles
in CB Box
15. Methyle Salicylate
Ointment B.F..
500 gms.
in A.G.
Bottle
78.26
500 gms.
in Polyjar
pack
39.22
16.(a)
Nitrofurazone
Ointment
USP
(Water
miscible
base.
401.00
1. Bubuna Chemicals,
D-2/2, New I.E.,
Jagatpur, Cuttack.
2. Bharat Salt &
Chemical Industries
Ltd., Naya Sarak,
Cuttack.
3. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
4. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar
5. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack
6. Phyto Pharmaceuticals (P) Ltd.,
I.E., Jagatpur,
Cuttack
7. Novo
Pharmaceuticals
Pvt. Ltd., I.E.,
Cuttack-10
8. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack
9. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
10. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10
(Ten units only)
16.(b).
Nitrofurazone
ointment USP 500 mg
W/V 2% (polyglycol
Base).
500 gm in
Amber
glass jar,
20 jar in
C.B.Box
1292.80
1.
Chemie India, I.E.,
Cuttack.
2.
I.D.D. (P) Ltd., I.E.,
Cuttack-10
3. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10
4. Bubuna Chemicals, D2/2, New I.E.,
Jagatpur, Cuttack
5. Surgiplast (India), Station
Road, Berhampur
6.Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack.
(Total Six units only)
17.Tab.
Paracetamol
IP-500 mg.
10 Tabs.
per strip
in
aluminiu
m foil.
10 strips
in CB Box
20.62
1. Chemie India, I.E.,
Cuttack.
2. I.D.D. (P) Ltd., I.E.,
Cuttack-10
3. Surgiplast (India),
Station Road,
Berhampur
4. Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack
(Four units only)
1. Surgiplast (India),
Station Road,
Berhampur
2. Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack.
(Two units only)
1. Chemie India, I.E.,
Cuttack
2. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack
3. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack
4. I.D.D. (P) Ltd., I.E.,
Cuttack-10
5. Panacea (P) Ltd.,
184/185, New I.E.,
18.Syp.Paracetamol IP
125 mg/5ml.
450 ml in
Ambar
Glass
bottle
27.35
Jagatpur, Cuttack
6. Surgiplast (India),
Station Road,
Berhampur
7. Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack
(Seven units only)
19.Tab.
Riboflavin
(Vit.B2 ) IP 10 mg
(Aluminium foil)
10 Tabs.
per strip
in
aluminiu
m foil.
10 strips
in CB Box
8.56
1. Bubuna Chemicals,
I.E., Jagatpur,
Cuttack.
2. Bharat Salt &
Chemical Industries
Ltd., Nayasarak,
Cuttack.
3. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
4. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar
5. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
6. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack
7. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack
8. Novo
Pharmaceuticals Pvt.
Ltd., I.E., Cuttack-10
9. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10
(Nine units only)
1. Eastern India
Pharmaceutical
Laboratory, B-22,
I.E., Bhubaneswar.
2. Novo
Pharmaceuticals Pvt.
Ltd., I.E., Cuttack-
20.(a) Tab. Salbutamol
IP-4 mg.
10 Tabs.
per strip.
10 strips
in CB Box
9.56
21.Tab.
Sulphamethoxazole 400mg +
Trimethoprim 80mg. IP
(Aluminium foil)
10 Tabs.
per strip
in
aluminiu
m foil.
10 strips
in CB Box
45.50
10.
3. I.D.D. (P) Ltd., I.E.,
Cuttack-10
4. Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack.
5. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack.
6. Bharat Salt &
Chemical Industries
Ltd., Nayasarak,
Cuttack.
7. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack
8. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack
9. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack
(Nine units only)
1. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
2. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack
3. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar
4. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10.
5. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack.
6. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack.
7. Universal Chemical &
Pharmaceutical
22.(a) Cap. Tetracycline 500mg. IP
(Aluminium Foil)
10 Caps.
per strip
aluminiu
m foil.
10 strips
in CB Box
70.06
Industries, I.E.,
Jagatpur, Cuttack.
8. Novo
Pharmaceuticals Pvt.
Ltd., I.E., Cuttack10.
(Ten units only)
1. Universal Chemical &
Pharmaceutical
Industries, I.E.,
Jagatpur, Cuttack.
2. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
(Two units only)
22. (b) Cap. Tetracycline 250mg. IP
(Aluminium Foil).
10 Caps.
Per strip
aluminiu
m foil.
10 strips
in CB Box
42.25
23. (a) Tr. Iodine
(Strong) USP.
450 ml in
Ambar
Glass
Bottle
44.65
1. Bubuna Chemicals,
I.E., Jagatpur,
Cuttack.
2. Bharat Salt &
Chemical Industries
Ltd., Nayasarak,
Cuttack-2.
3. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack
4. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10.
5. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar.
6. Swaraj Chemicals &
Pharmaceutical
Works, New I.E.,
Jagatpur, Cuttack.
7. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack.
8. Monday Medicines,
Jaleswar, Balasore
9. Universal Chemical &
Pharmaceuticals,
I.E., Jagatpur,
Cuttack
10. Novo
Pharmaceuticals Pvt.
Ltd., I.E., Cuttack10.
11. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack.
(Eleven units only)
23.(b) Tr. Iodine USP.
450 ml in
Ambar
Glass
Bottle
20 Bottle
per box.
905.05
1. Bubuna Chemicals,
I.E., Jagatpur,
Cuttack.
2. Eastern Chemical
Industries (P) Ltd.,
I.E., Cuttack-10.
3. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack.
4. I.D.D. (P) Ltd.,
Madhupatna,
Cuttack-10.
5. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack.
6. Universal Chemical &
Pharmaceuticals, I.E.,
Jagatpur, Cuttack
(sixunits only)
24.(a) Tab. Vitamin-C
(Ascorbic Acid) 500mg
IP (Aluminium Foil)
10 Tabs.
per strip
in
aluminiu
m foil.
10 strips
in CB Box
25.Compound Benzoic
Acid ointment
I.P.(Whit’s Field
500 gm.
in polyjar
pack
15.71
1240.65
1. Bubuna Chemicals,
I.E., Jagatpur,
Cuttack.
2. Jagannath Chemical
& Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
3. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack-10.
4. Phyto
Pharmaceuticals (P)
Ltd., I.E., Jagatpur,
Cuttack.
5. I.D.D. (P) Ltd., I.E.,
Cuttack-10.
6. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack.
7. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar
Ointment IP.
20 jars
per box
8. Universal Chemical &
Pharmaceuticals,
I.E., Jagatpur,
Cuttack
(Eight units only)
1. Novo
Pharmaceuticals Pvt.
Ltd., I.E., Cuttack10.
2. Eastern India
Pharmaceutical
Laboratories, B-22,
I.E., Bhubaneswar.
3. Bharat Salt &
Chemical Industries
Ltd., Nayasarak,
Cuttack.
4. Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack.
5. I.D.D. (P) Ltd., I.E.,
Cuttack-10.
(Five units only)
1. Novo
Pharmaceuticals Pvt.
Ltd., I.E., Cuttack10.
2. Eastern India
Pharmaceutical
Laboratories, B-22,
I.E., Bhubaneswar.
3. Bharat Salt &
Chemical Industries
Ltd., Nayasarak,
Cuttack.
4. Bijoy Surgicals &
Chemicals, New I.E.,
Jagatpur, Cuttack.
5. I.D.D. (P) Ltd., I.E.,
Cuttack-10.
(Five units only)
1. Eastern Chemical
Industries Pvt. Ltd.,
I.E., Cuttack.
2. Bubuna Chemicals,
I.E., Jagatpur,
Cuttack.
3. Kingsy
Pharmaceutical
Works, I.E.,
Mancheswar,
Bhubaneswar.
(Three units only)
1. Chemie (India), I.E.,
Cuttack-10.
2. Surgiplast (India),
Station Road,
Berhampur.
3. Bijoy Surgicals &
Chemicals, Plot
No.120, New I.E.,
Jagatpur-20.
4. Panacea (P) Ltd.,
184/185, New I.E.,
Jagatpur, Cuttack.
(four units only)
TOTAL NUMBER OF UNITS HOLDING RATE
CONTRACT FOR THE ABOVE ITEMS - 24.
1.
Chemie (India), I.E., Cuttack-10.(Upto 22.2.07)
2. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack(Upto 31.12.07)
3. Eastern India Pharmaceutical Laboratories, I.E., Bhubaneswar(Upto 21.2.08)
4. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar(Upto 31.12.07)
5. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack.(Upto 31.12.07)
6. Monday Medicines, Jaleswar, Balasore(Upto 31.12.07)
7. I.D.D. (P) Ltd., Madhupatna, Cuttack-10.(Upto 21.2.08)
8. Swaraj Chemicals & Pharmaceutical Works, New I.E., Jagatpur, Cuttack(Upto 21.2.08)
9. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10.(Upto 21.2.08)
10. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2(Upto 21.2.08)
11. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack((upto 21.2.08)
12.Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack.(Upto 21.2.08)
13.Surgiplast (India), Station Road, Berhampur((Upto 30.6.07)
14.Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack(Upto 20.2.08)
15.Bijoy Surgicals & Chemicals, Plot No. 120, New I.E., Jagatpur, Cuttack(Upto 30.6.07)
16.Eastern Chemical Industries (P) Ltd., I.E., Cuttack-10.(Upto 21.2.07)
TERMS OF DELIVERY & TAXES :
1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax which may be
charged extra as admissible if any.
2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations
charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of
one year from the date of issue of rate contract.
3.The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
RATE CONTRACT CIRCULAR NO. 1325 dt.22.2.07
23.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
FRP DOOR SHUTTER
AND FRP DOOR FRAME.
FRP Door shutters (GRP)
of 32mm thick. (Detail
specification at AnnexureA and drawing B & B-1 are
enclosed)
FRP Door Frame (GRP) of
75mmx100mm
(Detail
specification at AnnexureA and drawing and design
at
Annexure-C
are
enclosed.
Per sqr.
mtr.
Per running
metre
1930.00
14.02.2009
(Extension vide
circular
No.8186
26.11.07)
1. Fibre Space Composites
Pvt. Ltd., Plot No.A/25,
Sector-B, Chandaka
I.E., Patia,
Bhubaneswar.
328.00
TERMS OF DELIVERY & TAXES :
1)
2)
3)
The rate is ex-factory, inclusive of cost of packing and exclusive of VAT which may be charged
extra as applicable, if any.
In case of bulk supply, pre-delivery inspection may be made compulsory at the desire of the
purchaser and as such one out of ten lots supplied by the unit shall be tested by CIPET, BBSR.
The test certificate issued by the CIPET shall be submitted to the purchaser in order to ensure
the quality of the store item.
The delivery schedule may be mutually decided between the rate contract holder and the
indenting officer.
RATE CONTRACT CIRCULAR NO. 1241 dt. 14.02.2008
24.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
03.01.09
1. Orissa Steel & Wire
Products (P) Ltd., B14, I.E., Cuttack-10.
(Annual production capacity
– 450 T. Rs.316 lakhs
G.I. STAY WIRE
G.I.STAY WIRE as per ISS
No.2141/79. The relevant
standard indicated therein
Grade-4 having minimum
tensile strength 700N/mm
square
and galvanised
with heavy quoted wire
hand type conforming to
ISS-4826
with
latest
amendment etc.
Size:
A) 7/8 SWG(4mm)
2. Sheo Industries, C-8,
I.E., Cuttack-10.
B) 7/10 SWG(3.15
mm)
Per MT
Per MT
44,232.00
44,644.00
TERMS OF DELIVERY & TAXES :
1. The rates are ex-factory exclusive of VAT and entry tax which may be charged extra, as admissible,
if any.
2. The delivery schedule may be mutually decided between the indenting officer and the contractor.
RATE CONTRACT CIRCULAR NO. 120 dt. 04.01.2008
25.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
42,850.00
Rate per
M.T
22.06.08
(Extenstion vide
circular No.113
dt.4.1.08)
Name of the rate contract
holding SSI units
G.I.BARBED WIRE
G.I.
BARBED
WIRE
conforming
to
IS
No.278/78 with minimum
breaking load of completed
barbed wire 370 kg or 3.70
KN.
.
1. M/s. Orissa Steel &
Wire Products (P) Ltd.,
B-14, I.E., Cuttack-10
M/s. Sheo Industries,
C-8, I.E., Cittack-10.
2. M/s. Sheo Industries,
I.E., Cuttack-10
TERMS OF DELIVERY & TAXES :
1.
The rate is inclusive of excise duty, exclusive of VAT and entry tax which may be charged
extra, as admissible, if any.
2.
The delivery schedule may be mutually decided between the contractor and the indentor.
RATE CONTRACT CIRCULAR NO. 6820 dt.23.12.06, 113 dt.4.1.08
26.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
G. I. FLAT
G. I. Flat of standard sizes
5.6 mtrs. Long conforming
to IS No.2062, 2629 &
4759.
Rate per Kg.
1. 50x6mm
2. 75x10mm
TERMS OF DELIVERY & TAXES :
03.09.2007
35.25
36.85
1. M/s. New Modern
Technomech (P) Ltd., S2/29, I.E., Chhancha,
Baripada, Mayurbhanj757001.
1. The rates are ex-factory, exclusive of central excise duty, VAT and entry tax which may be
charged extra, as admissible, if any.
2. Minimum time allowed for delivery of goods will be mutually decided between the indenting
officer and the supplier.
Rate Contract Circular No. 1339 dt.04.03.2006, 2235 dt.24.3.07
Description of the store
item
27.
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
GREAT COAT:
A) Great Coat for Reserve
Inspectors and surgents as
per the sample approved
by Orissa Police. The cloth
are to be used conforming
to
IS:674/74
(2nd
Revision).
Per each
545.00
DIMENSIONS:
Length – 49-51”
Chest - 53-55”
sleeve – 34-35”
Whorst – 57”
Skirt –
67”
Neck – 19”
Back – 20”
Turned off – 6”
Length of half belt-10”
B)
Great Coat for ASI,
Habildars and Constables
as per sample approved by
Orissa Police. The cloth
are to be used conforming
to IS No.679/74 (2nd
revision). The lining cloth
shall be nylon lining cloth.
DIMENSIONS:
Length – 49-51”
Chest - 53-55”
sleeve – 34-35”
Whorst – 57”
Skirt –
67”
Neck – 19”
Back – 20”
1. The Great coat shall
be made out of light
grey crish feize cloth.
515.00
28.01.2009
subject to
validity of EPM
registration and
VAT certificate.
1. Goenka Enterprise,
Town Hall Road,
Ward No.12, Holding
No.336, Cuttack-9.
(Annual Production
Capacity –12000 Pcs.)
(Valid upto
25.10.2008)
2. Sushree Garments,
New Rousa Patna,
Cuttack. (Valid upto
19.12.2008)
3. Vishal Industries,
Rovers Street, Buxi
Bazar, Cuttack-1
(Annual Production
Capacity – 6000 nos.)
(Valid upto
24.07.2008)
4. Kalinga Industries,
Jaunliapatti,
Cuttack-9. (Annual
Production Capacity15000 Pcs. )(Valid
upto 28.01.2009)
5. Saswot Industries,
Taranibihar,
Bidanasi, Cuttack
(Annual Production
Capacity –
Rs.25,00,000/-)
(Valid upto
08.04.2008)
6. Usha Udyog &
Garments, Meria
Bazar, Cuttack
(Annual Production
Capacity –
Rs.10,00,000/-)
(Valid upto
22.07.2008)
7.
2. Turned down collar
shall be provided.
3. 4 button holes on left
front and 4 button
eyelets on right front
shall be provided.
4. Double belt at back
with button holes on
left strap and 3 button
eye lets on right strap
shall be provided.
5. Turned up cutt shall
be provided.
6. Two side pockets with
flap unbutton on each
attached to be inside
tongue
shall
be
provided.
7. Inside
lining
cloth
shall be silken in case
of
great
coat
of
Surgent/
Reserve
Inspector. In case of
great
coat
of
Habildar/ ASI nylon
lining cloth shall be
provided.
8. The
cloth
shall
conform to IS No.
679/74 (2nd revision).
TERMS OF DELIVERY & TAXES :
1. The rates are ex-factory, exclusive of value added tax (VAT) and entry tax which may be charged
extra as admissible, if any.
2. The delivery schedule may be mutually decided between the indenting officer and the supplier.
RATE CONTRACT CIRCULAR NO. 775 dt.29.01.2008, 1006 dt.6.2.2008
28.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
H.T. INSULATOR (DISC.
INSULATOR)
11 KV
(Disc.
string insulator
Insulator)
for
Rate per
each
30.09.2007
28)
ayur Electro Ceramics
M
overhead
power
line
conforming to IS:731/71
(P) Ltd., At/P.O.
Pratapgarh, Via.
Rairangpur, Dist.
Mayurbhanj-50.
1) Tongue & Clevis
type EMS-45KN
226.00
2) Ball & Socket Type
EMS-70 KN
236.00
TERMS OF DELIVERY & TAXES :
1.
2.
3.
4.
The rates are ex-factory inclusive of cost of packing and exclusive of entry tax and VAT which
may be charged extra, as admissible, if any.
The delivery schedule may be mutually decided between the rate contractor holder and the in
denting officer.
The rate contract holding firm shall furnish drawings and details of parameters of the store
item at the time of execution of supply order.
The rate contract holding firm shall have to get its products type tested at CPRI/NIT/NTH at
an interval of 2 years.
RATE CONTRACT CIRCULAR NO. 4166 dt.25.6.07
29.
Description of the store
item
H.T. STAY SET
1. M.S. Stay Rod of 20mm
dia 1800mm in length,
one side formed an eye
and
welded
with
internal dia 40mm with
one thimble and the
other side of the rod is
threaded and fitted with
2
nos.
of
suitable
hexagonal nuts and
with one round washer
of
3mm
thickness
complete
with
M.S.Anchor
plate
250x250x6mm,
dimensions with centre
hole of 22mm dia. The
entire
rod,
plate,
thimble,
nuts
and
washer should be hot
dipped galvanised as
per IS:2633-1972 (As
per
OSEB
Drawing
No.9634/92)
2. Single Bow tum buckle
made of 16mm dia
Unit
Per set
Rate per
unit
Rs.
583.00
Period of
validity
13.03.2009
(Subject
to
validity
of
EP&M
Registration
certificate
&
VAT Clearance
Certificate)
Name of the rate contract
holding SSI units
1. Indian Metal Industries,
Nayabazar, Cuttack-4
2. Kirti Industrial
Enterprise,11/9, I.E.,
Cuttack-10
3. New Modern Technomech
Pvt. Ltd., S-2/29.
Chancha I.E., Station
Bazar, Baripada,
Mayurbhanj-757001.
M.S.Rod and the centre
rod of 20mm dia of
length 450mm with one
end formed an eye and
welded. The threaded
length of the centre rod
should be 300 mm. The
base channel of the bow
of size 75x40x6mm and
180 mm in length with
thimble and 2 nos.
suitable
hexagonal
nuts. The items should
be
hot
dipped
galvanised
as
per
IS:2633/1972 (as per
OSEB
Drawing
No.9635/92).
TERMS OF DELIVERY & TAXES :
1. The rate is ex-factory, exclusive of excise duty, value added tax (VAT) and Orissa Entry Tax which
may be charged extra as admissiable if any.
2. The delivery schedule may be mutually decided between the contractor and the indenting officer.
RATE CONTRACT CIRCULAR NO. 2219 dt.25.3.2008
30.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
HOSPITAL BED STEAD
1. Hospital Bed Stead,
General purposes, top
made out of 1.25mm
C.R. sheetwith plate
corner
fittings
conforming
to
IS:5029/79
with
amendment No.1 & 2,
with four Nos. of
mosquito net pole of
1.50 mtr. Length each
made out of 19.05mm
OD x 1.22mm thick
M.S. Tube & Provision
of two nos of 50mm
length M.S.Tube of
25.40mm
O.D.
x
1.22mm thick at four
corners of the bed for
installing
mosquito
Rate per
each
2200.00
8.4.2009
(Subject
to
validity
of
EP&M
Regn.
Certificate)
1. Konark Industries, S.E.11, I.E., Madhupatna,
Cuttack-10
2.Rollex Enterprisers, TypeII-12, I.E., Cuttack-10.
3.Radha Enterprises,
Nayasarak,Cuttack
4.Steelex Industries,
A.B.Road, Nima Sahi,
Cuttack-753001.
5.Leo Engineers Pvt.
Ltd.,93/B/1, New, I.E.,
Phase-II, Jagatpur,
Cuttack(Valid upto
11.9.2008)
net.
2. Hospital Bed Stead
general purposes, top
made out of 1.25mm
G.P.Sheet with plate
corner
fittings
conforming
to
IS:5029/79
with
amendment No. 1 & 2
with four nos of
mosquito net pole of
1.50 mtr length each
made out of 19.05 mm
O.D. x 1.22mm thick
M.S. tube & provision
of two nos of 50mm
length M.S. tube of
25.40mm
O.D.
x
1.22mm thick at four
corners of the bed for
installing
mosquito
net.
2190.00
TERMS OF DELIVERY & TAXES :
1. The rates recommended for conclusion of rate contract are ex-factory, exclusive of VAT and
Orissa Entry Tax, which may be charged extra, as admissible if any.
2. Minimum time allowed for delivery of goods will be mutually decided between the indenting officer
and the contractor.
RATE CONTRACT CIRCULAR NO. 2559 dt.9.4.2008
31.
Description of the
store item
ISI marked Direct Action
Hand Pump consisting
of
(i)CylinderAssembly
(ii)Pump Head Assembly
(iii)RetrievingRod Assembly
Rising
main
&
combination & spanner
suitable for tube well
assembly consisting of
upper
casing,
lower
casing & well screen
assembly conforming to
IS:
Specification
No.14106/96
with
subsequent
amendment, if any, for
the depth of 40 mtrs.
Unit
Per set
Rate per
unit
Rs.
Rs.7,179.00
Period of
validity
Name of the rate
contract holding SSI
units
Upto 24.3.2008
(Subject
to
validity of EPM
regn.
Certificate, VAT
Clearance
Certificate
&
BIS) licence
M/s. Ori Plast Ltd., O.T.
Road, Balasore.
TERMS OF DELIVERY & TAXES :
1.
The Rates is ex-factory, inclusive of excise duty, exclusive of Inspection charges, VAT and entry
tax which may be charged extra, as admissible, if any. The Indenting authorities should ensure
valid BIS Licence of the store item at the time of purchase.
2.
Inspection of the store item will be conducted by BIS. Inspection by CIPET may be made at the
instance of Indenting Officers, if necessary.
3.
Minimum time to be allowed for delivery of goods will be mutually decided between the Indenting
Officer and the contractor.
RATE CONTRACT CIRCULAR NO. 4844 dt.25.09.2006, 6811 dt.23.12.2006, 2108 dt.19.3.2007, 7463
dt.15.10.2007
32.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
ISI MARKED DEEP WELL
HAND
PUMP
STANDARD(SWDP)
AND
32mm N. B. RISER PIPE
IS:NO.15500
(PT-2)/
2004
ISI Marked Deep well
Hand
Pump
Standard
(SDWP)
conforming to
IS:15500(Part-2)
2004
complete with accessories
and alongwith 8 nos. of
riser
pipe
of
32mm
nominal bore, hot dip
galvanised screwed and
socketed, fitted with socket
made of
seamless or
machined from solid bar,
sockets fitted at one end
and thread protector at the
other end and & with 8
nos. of connecting rods
made of bright bar electro
galvanised
fitted
with
coupler and fitted with
stand assembly, suit-able
for use in bore wells/
casing of 100 mm and
125 mm N. B. minimum
(composite set)
ISI Marked Deep well
Hand
pump
Standard
(SDWP)
conforming
to
IS:15500
(Part-2)2004
with latest amendments
Per each
9092.00
24.03.2008 (E)
subject
to
validity of EPM
registration and
BIS licence.
1. Bhagirathi Metal
Industries Pvt. Ltd., S1/116 & 101, IDCO’s
New I.E., Rasulgarh,
Bhubaneswar-10.
2. M.M. & Co., B-30, I.E.,
Cuttack-10.
3. Orissa Pump & Engg.
Co. Ltd., B-7, 8 & 9,
I.E., Jagatpur, Cuttack21. 4. Koshala Udyog,
B-23, I.E., Rourkela-4.
(Upto 31.8.2007)
Per each
5156.00
with 8 nos. of connecting
rod made out of bright bar
of 12mm dia meter and 3.0
mtrs. long with hexagonal
coupler as per the relevant
IS specification referred
therein but without riser
pipe.
Additional length of Riser Per each
Pipe, 32mm nominal bore
hot dipped galvanized
screwed and socketed in
3.0 mtrs. length with a
tolerance of ± 0.25mm
conforming to IS:1239
(Pt.I)/latest
amendment
medium class. One end of
the riser pipe shall be fitted
with
hot
dipped
galvanized socket and the
other end with
thread
protector. The socket shall
be manufactured from
seamless pipe with the
dimension (length and
diameter) as specified in
IS:1239
(Pt.II)/latest
amend-ment and shall be
hot dipped galvanized.
492.00
TERMS OF DELIVERY & TAXES :
1. The rate contract are f.o.r. destination inclusive of cost of packing, exclusive of VAT and entry tax
which may be charged extra, as admissible, if any.
2. The delivery schedule will be mutually decided by the indentor and the supplier.
3. Only ISI marked stores shall be supplied. BIS licence should be valid at the time of supply of
stores.
4. The rate contract of SSI units shall be automatically suspended/ cancelled in case of BIS licence is
suspended/ cancelled.
INSPECTION: The indenting officer shall get the inspection conducted by any agency appointed by
him. The rate contract holder will provide necessary facilities for smooth inspection.
Inspection charges, if any, will be borne by the indenting officer.
RATE CONTRACT CIRCULAR NO. 1923 Dt.9.3.2007, 2566 dt.18.4.2007
33.
Description of the store
item
Unit
Rate per
unit
Period of
validity
Name of the rate contract
holding SSI units
Rs.
ISI MARKED COMMON
SALT – IRON FORTIFIED
CONFORMING TO IS: NO.
12981/91
Per bag
6.35
15.9.2008
1. Prince International,
Health Care (P) Ltd.,
A/2, Bhagabanpur, Indl.
Estate, Patrapada,
Bhubaneswar
(Production Capacity as
per DIC PMT Certificate –
24000 M.T.)
TERMS OF DELIVERY & TAXES :
•
•
The rate s exfactory, inclusive of cost of packing of 500 gm. Net pack in LDPE bag and
25 Kg. i.e. 50 nos. of 500 gm. Net pack in HDPE Bag and exclusive of value added tax
and exclusive of VAT and entry tax which may be charged extra, as admissible, if any.
The minimum time allowed for delivery of goods and the delivery schedules may be
mutually decided between the rate contract holder and the Indenting Officer.
RATE CONTRACT CIRCULAR NO. 4874 dt.25.09.2006.
34.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
ISI MARKED RIGID UPVC
PIPES:
Technical Specification of
ISI Marked UPVC Pipes IS:
No.4985/2000.
The Rigid Unplasticized
PVC pipes for plain as well
as socket ended pipes
including
those
for
portable water supplies
conforming
to
IS:4985/2000 shall have
the following requirement:
1. Raw materials: The raw
material
used
shall
conform
to
the
IS:4985/2000
IS:10124/1998
and
IS:14182/1994.
2. Classes: The class of
pipes shall be pressure
rating (working pressure)
at 27°C from Class-I to
Class-4.
3. Length: The effective
length of pipe shall be 4,5,
Rate per
meter
As per
Statement-A
07.08.2008)
subject
to
validity of EPM
registration and
BIS licence &
VAT Clearance
Certificate
Name of the rate contract
holding SSI units
or 6 meters. The Pipes may
be supplied in other
lengths
as
per
the
requirements of indentor.
4. Marking: Each pipe
shall
be
clearly
and
indelibly marked in ink or
stenciled conforming to IS
Specifications and shall
show the following.
•
Manufacturers name
and trade mark.
Outside diameter.
Class of pipe and
pressure rating.
Batch or lot number.
Colour marking as per
ISS:
Each pipe shall be
marked
with
BIS
standard mark.
•
•
•
•
•
The weightage, meterage
and rates of each class
and size of pipe shall be in
conformity as per the rate
chart enclosed.
5. Solvent Cement should
be packed in suitable
plastic
container
with
proper sealing.
MARKING:
B.
C.
D.
E.
Manufacturer name
and trade name.
Type
Batch
No.
/Manufacturing
date.
Quantity.
The Colour of the pipe
shall be grey/ivory grey.
TERMS OF DELIVERY & TAXES :
•
•
•
The store item shall be ISI marked.
Only ISI marked stores shall be supplied. BIS licence would be valid at the time of
supply of stores.
Rate contract of the SSI units will be automatically suspended/ cancelled in case the
•
•
•
•
BIS licence is suspended/cancelled.
The ISI certification marks, the name of the manufacturer or trade mark only with batch
No., Class of pipes and sizes of pipes shall be stencilised legibly on each pipe.
Any suspension/cancellation of BIS licence shall be intimated to this
Directorate/indentor’s by the Contractor.
All pipes would be accepted subject to testing by CIPET, BBSR.
Pre-delivery inspection for all supplies of PVC pipes shall be conducted jointly by the
technical officer of the Directorate of EP&M & CIPET, Bhubaneswar.
TIME ALLOWED FOR DELIVERY OF PIPES:
•
The delivery period will be normally for 15 days or as mutually decided between the rate
contract holder and the indenting officer.
RATE CONTRACT CIRCULAR NO. 3974 dt.8.8.06, 4533 dt.11.9.06, 5224 dt.13.10.06, 6296
dt.1.12.06, 6794 dt.23.12.06, 314 dt.10.1.07, 1558 dt.27.2.07, 1905 dt.9.3.07, 3685 dt.7.6.07, 3822
dt.14.6.07, 4263 dt.3.7.07, 6012 dt.4.8.07, 6028 dt.4.8.07, 6044 dt4.8.07, 564 dt.21.1.08, 1682
dt.25.02.2008,2128 dt.19.3.2008
NAME OF THE UNITS:
NOMINAL OUT DIAMETER OF PIPE FOR WHICH R/C HAS BEEN CONCLUDED AGAINST EACH
ITEM.
1. Duro Pipes (P) Ltd., Plot No.51/A, Sector-A,
Zone-A, I.E., Mancheswar, Bhubaneswar.
(Valid upto 07.08.2007 subject to validity of EPM
Regn, BIS licence and VAT clearance certificate)
2. Konark Pipe & Synthetics (P) Ltd., B-9, I.E.,
Mancheswar, Bhubaneswar.
(Valid upto 07.08.2007 subject to validity of EPM
Regn, BIS licence and VAT clearance certificate)
3. Krishna Plast Pipes (P) Ltd., I.E., Railway
Station Road, Bargarh.
(Valid upto 07.08.2007 subject to validity of EPM
Regn, BIS licence and VAT clearance certificate)
4. Jaiswal Plastic Tubes Ltd., Ganeswarpur I.E.,
N.H-5, P.O. Januganj, Balasore.
(Valid upto 07.08.2007 subject to validity of EPM
Regn, BIS licence and VAT clearance certificate)
5. Lingaraj Pipes (P) Ltd., Plot Nlo.13-A, I.E.,
Chandaka, Khurda.
(Valid upto 07.08..2007)
6. Shree Plastics (P) Ltd., Andhapasara Road,
Berhampur, Ganjam.
(Valid upto 07.08.2007)
Upto 250mm
Upto 200mm
i.Upto 200mm
ii. 250mm in Class 1 & 2 for socket ended
pipe
Upto 315mm
1. 90mm to 315mm in Class-I
63mm to 315mm in Class-II
63mm to 180mm in Class-III
(Both plain and bell ended)
2. 200mm to 315mm in Class-III
(Plain ended)
1. 90mm to 110mm , 160mm and
200mm in Class-I
2. 63mm to 110mm and 160mm in ClassII
3. 40mm to 110mm and 140mm to
180mm in Class-III (Both plain and
bell ended)
7. M/s. Oriplast Ltd., O.T. Road, Balasore.
Included consequent upon the orders
dt.11.09.2003 of the Hon’ble High Court, Orissa,
Cuttack passed in the WPC No.6923/02 and WPC
No.4653/2003 & 5456/2003.
(Valid upto 07.08.2007 subject to validity of EPM
Regn, BIS licence and VAT clearance certificate)
8. M/s. Swasteek PVC Pipes, At- Sanakusastali,
Badakustali, Berhampur, Ganjam, Orissa
(valid upto 7.2.2008)
9.M/s. PGL Supply & Services (P) Ltd., Plot No.1A, Chandaka Neucleus Complex, Sector-B, Patia,
Bhubaneswar
10.M/s. Hari Udyog (P) Ltd., O.T.Road, Balasore
Upto 630mm
a) 90mm to 110mm and 200mm socket
ended & 125 mm to 180 mm plain
ended in Class-I
b)63mm to 110mm plain ended & socket in
Class-II, 125mm to 180mm & 200 mm
socket ended in Class-II
c)40mm to 110mm & 200 mm with socket
ended & 125mm to 180 mm plain
ended in Class-III
a)90 to 110mm, 140, 160,180mm &
200mm in Class-I socket pipe
b)63 mm to 110 mm, 140, 160, 180mm &
200mm in Class-II socket pipe
c)40 to 110mm, 140 to 180mm & 200mm
in Class-III socket pipe
a)Class-I – 90mm to 250mm
b)Class-II-63 mm to 260mm
c)Class-III 40 to 250mm
all are socket ended
STATEMENT-A
Statement of rates of different sizes of ISI Marked UPVC Pipes as per IS No.4985/2000 along with
average weight in Kg. per running metre. Rate per Kg. Rs.67.25 (Rupees sixty seven and paise twenty
five) only including cost of solvent cement.
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Size
in
mm
25
32
40
50
63
75
90
110
125
140
160
180
200
Class-I
0.25 mpa
Qty. in kg. Rate per
per
meter
running
(Rs.)
meter
0.606
40.75
0.889
59.78
1.123
75.52
1.384
93.07
1.832
123.20
2.304
154.94
2.829
190.25
Class-II
0.4 mpa
Qty. in
Rate per
kg. per
meter
running (Rs.)
meter
0.476
32.01
0.667
44.85
0.940
63.21
1.346
90.51
1.751
117.75
2.180
146.60
2.847
191.46
3.642
244.92
4.405
296.23
Class-3
0.6 mpa
Qty. in
Rate per
kg. per
meter
running (Rs.)
meter
0.281
18.89
0.428
28.78
0.677
45.52
0.939
63.14
1.344
90.38
1.935
130.12
2.553
171.68
3.169
213.11
4.080
274.38
5.221
351.11
6.459
434.36
Class-4
0.8 mpa
Qty. in
Rate per
kg. per
meter
running (Rs.)
meter
0.152
10.22
0.236
15.87
0.347
23.33
0.553
37.18
0.835
56.15
1.204
80.96
1.682
113.11
2.510
168.79
3.257
219.03
4.133
277.94
5.383
362.00
6.725
452.25
8.338
560.73
14
15
16
17
18
19
20
21
22
23
35.
36.
220
250
280
315
350
400
450
500
560
630
3.636
4.379
5.594
7.002
8.770
11.227
14.148
17.404
22.004
27.728
244.52
294.48
376.19
470.88
589.78
755.01
951.45
1170.41
1479.76
1864.70
Description of the
store item
Unit
5.605
6.788
8.597
10.864
13.821
17.444
22.225
27.364
34.385
43.450
376.93
456.49
578.14
730.60
929.46
1173.10
1494.63
1840.22
2312.39
2922.01
Rate per
unit
Rs.
8.110
10.054
12.615
15.989
20.132
25.582
32.344
39.999
50.095
63.418
Period of
validity
545.39
676.13
848.35
1075.26
1353.87
1720.38
2175.13
2689.93
3368.88
4264.86
10.507
13.080
16.355
20.593
26.211
33.267
42.025
52.109
65.182
82.365
706.59
879.63
1099.87
1384.87
1762.68
2237.20
2826.18
3504.33
4383.48
5539.04
Name of the rate
contract holding SSI
units
KHAKI WOOLEN BERET Per each
Rs.24.00
10.10.2008
1.M/s. Suruchi, Mahatab
CAP (APR & OR)
from the date of Road, Kalinga Lane,
1.Khaki Woolen Beret Cap
issue of this Cuttack-12 (Annual
(APR)
as
per
the
rate
contract Production Capacity –
specification
of
Orissa
circular
1,20,000 nos.)
Police, Cuttack as follows:
(Subject
to 2.M/s. Utkal Enterprises,
Khaki Woolen Cloth round
validity
of Behind Hind Cinema,
shaped with thick cotton
EP&M
Rgn. Ranihat, Cuttack-7(Annual
lining inside and a tape of
Certificate
& production capacity –
VAT Clearance 1,20,000 nos. as per the
½” width to fit the head
Rs.25.00
Certificate
DIC PMT regn. Certificate)
with a small bow with Per each
3.M/s. Goenka Enterprises,
black band tape.
Town Hall Road, Cuttack-9
2.Khaki woolen Beret Cap
(20,000 nos. as per the DIC
(OR)
as
per
the
PMT Regn. Certificate)
specification
of
Orissa
(Valid upto 29.08.2008)
Police, Cuttack as follows:
4.M/s. Saswot Industries,
Khaki Woolen cloth round
Tarinivihar, Bidanasai,
shaped with thick cotton
Cuttack (Annual Production
lining inside and a tape of
Capacity – Rs.25,00,000/½” width to fit the head
as per the DIC PMT Regn.
with a small bow with
Certificate) (Valid upto
black band tape and red
08.04.2008)
woolen Diamond shaped
piece stitched on the
center of forehead to
accommodate
the
cap
badge.
Terms of Delivery:
1.The rate is ex-factory, inclusive of cost of packing & excise duty but exclusive of Value Added Tax and
Orissa entry tax which may be charged extra as admissible if any.
2.The delivery schedule may be mutually decided between the Indenting Officer and the rate contract
holding SSI unit.
Rate Contract Circular No. 7401 dt.11.10.07,7748 dt.02.11.2007, 8179 dt.26.11.07
Description of the store
Unit
Rate per
Period of
Name of the rate contract
item
unit
validity
holding SSI units
Rs.
L.T.CROSS ARM:
1. L.T.Cross
Arm
3
Per kg.
30.60
09.01.2008(E)
1. Sheo Industries, E-8,
Phase 4 wire made out
of
M.S.
Channel
75x40mm
as
per
OSEB
Drawing
No.3815/74
having
approx weight of 7.88
Kg.
2. L.T.Cross Arm Single
phase 2 wire made out
of
M.S.
Channel
75x40mm
as
per
Drawing No.3815/75
having approx weight
of 3.62 Kg.
subject
to
validity of EPM
Regn. certificate
and
VAT
clearance
certificate.
32.20
Industrial Estate,
Cuttack-10.
2. Utkal Metal Products (P)
Ltd., C-3, I.E.,
Berhampur-10, Dist.
Ganjam.
3. Indian Metal Industries,
Nayabazar, Cuttack-4.
4. Jena Engineering
Works, Utkal Ashram
Road, Berhampur-1,
Dist. Ganjam.
TERMS OF DELIVERY & TAXES :
•
•
The rates are ex-factory exclusive of value added tax and Orissa
entry tax which may be charged extra as admissible, if any.
The delivery schedule may be mutually decided between the
indenting officer and the supplier.
RATE CONTRACT CIRCULAR NO. 3441 dt. 10.07.2006, 6347 dt.20.8.07
37.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
L.T. G.I. Pin
1.
L.T.
G.I.
Pin
conforming
to
IS:7935/75 & R.E.C.
standard 0.2
Rate per
each
2.
11
KV
G.I.
conforming
IS:2486(Pt.I)/71
Pin
to
Rate per
each
3.
33
KV
G.I.Pin
conforming
to
IS:2486(Pt.I)/71
Rate per
each
29.00
46.00
17.01.2008(E)
subject
to
validity of EPM
Regn.
Certificate and
VAT clearance
certificate.
1. New Modern
Technomech (P) Ltd.,
S-2/29, Chancha
I.E., Station Bazar,
Baripada,
Mayurbhanj-757001.
150.00
Ex-factory
TERMS OF DELIVERY & TAXES :
•
•
The rates are ex-factory exclusive of value added tax and entry tax which may be charged
extra as admissible, if any.
The delivery schedule may be mutually decided between the indenting officer and the
contractor.
RATE CONTRACT CIRCULAR NO. 3634 dt. 18.07.2006, 6347 dt.20.8.07
38.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
L.T.STAY SET
1. M.S.Stay Rod of 16mm
dia1800mm in length
one side formed an eye
and
welded
with
internal dia 40mm with
one thimble and the
other size of therod is
threaded and fitted with
2
nos.
Suitable
hexagonal nuts and
with one round weasher
of 3mm thick ness
complete with one M.S.
anchor
plate of size
150x150x6mm
with
centre hole of 40mm
dia. The entire rod,
plate, thimble, nuts and
washer should be not
dipped galvanised as
per IS:2633/72 (As per
OSEB
Drawing
No.9636/92)
2. Single bow turn buckle
made of 16mm dia M.S.
Rod and the centre rod
of 20mm dia of length
450mm with one end
formed an eye and
welded. The threaded
length of the centre rod
should be 300mm. The
base channel of the bow
of size 50x50x6mm and
180mm in length with
thimble and 2 nos
suitable Hexagonal nuts
with items should be
hot dipped galvanised
as per IS:2633/1972 (As
per
OSEB
Drawing
No.9635/92)
Rate per
set
333.00
13.03.2009
(Subject
to
validity
of
EP&M
Regn.
Certificate
&
VAT Clearance
Certificate)
1. Indian Metal Industries,
Nayabazar, Cuttack-4
2. Kirti Industrial
Enterprise,11/9, I.E.,
Cuttack-10
3. New Modern Technomech
Pvt. Ltd., S-2/29. Chancha
I.E., Station Bazar,
Baripada, Mayurbhanj757001.
TERMS OF DELIVERY & TAXES :
1. The rate is ex-factory, exclusive of excise duty and value added tax which may be charged extra
as admissible, if any.
2. The delivery schedule may be mutually decided between the contractor and the indenting officer.
RATE CONTRACT CIRCULAR NO. 2271 dt.27.03.2008
39.
Description of the store
item
LEAD ACID
BATTERY:
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
STORAGE
ISI Marked lead acid
storage battery for motor
vehicles as per IS No.
7372/95 (Uncharged):
Rate per
each
15.07.2008
1. Jyoti Battery
Industries, New I.E.,
Jagatpur, Cuttack21.
Type of Batteries
a)
b)
c)
d)
e)
f)
g)
h)
i)
6 V 17 plates 120AH
6 V 19 plates 135AH
6 V 21 plate 150 AH
12V 7 plate 45 AH
12V 9 plate 60AH
12V 13 plate 88AH
12V 19 Plates 135AH
12V 21 plates 150AH
12 V 25 plates 180 AH
1763.00
1902.00
2039.00
1521.00
1792.00
2581.00
3793.00
4225.00
4869.00
TERMS OF DELIVERY & TAXES :
1.
2.
3.
4.
The rates are ex-factory and exclusive of excise duty & exclusive of entry tax and VAT which
may be charged extra, as admissible if any.
The battery should bear ISI certificate mark as per IS No.7372/95 and the rate contract
holding firm shall produce the valid BIS licence at the time of delivery of the store item and at
the time preferring bills for payment.
There shall be service guarantee for one year from the date of putting the battery into
operation after initial charging. All repairs shall be carried out by the contractor during this
period free of charges including freight, if any. The storage life of the battery shall be
guaranteed for a period of 24 (twenty-four) months from the date of supply.
The delivery schedule will be mutually decided by the indentor and the supplier
RATE CONTRACT CIRCULAR NO. 6334 dt.20.8.07
40.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
L.D.P.E. BAG:
Low
Density
Poly-thene
Rate per
107.00
24.03.2009
1.
Poly Printex, Plot No.
Bag excluding vest and
type and ‘D’ punched type
prepared out of polyethylene
film
having
nominal
thickness
of
0.04mm ± 25% conforming to IS No.2508/84
(Size of the bags will be
decided
as
per
the
requirement
of
the
purchaser).
kg
subject
to
validity of EPM
Regn. certificate
&
VAT
clearance
certificate.
718/1, Bomikhal,
Rasulgarh,
Bhubaneswar.
(Production Capacity as
per DIC – 60 Ton.)
2. Orissa Polymer, Plot
No.171, New I.E.,
Jagatpur, Cuttack.
(Production Capacity as
per DIC – 72,000 Kg.)
3. Konark Plastic
Industries, IDCO Plot
No.70, Industrial Estate,
Kalunga, Rourkela,
Dist. Sundargarh.
(Production Capacity as
per DIC – 90 M.T.)
4. Associated Plastic (P)
Ltd., At. Ganeswar-pur
Industrial Area, P.O.
Januganj,
Dist.Balasore.
(Production Capacity as
per DIC – 126 M.T.0
5. Auro Plastics, 145,
Sector-A, Zone-a, I.E.,
Bhubaneswar
(Production Capacity as
per DIC – 65 M.T.)
6. Modern Poly Pack
Industries, B-6, I.E.,
Balasore. (Production
Capacity as per DIC –
28 M.T.)
7. Jit Pack, 65, New I.E.,
Jagatpur, Cuttack.
8. Polychem India, At/P.O.
Khadipada, Puri751002 (Production
Capacity as per DIC –
36 M.T.)
9. Balaji Plastic,
Industrial Estate,
Berhampur-760008.
Dist. Ganjam.
(Production Capacity as
per DIC – 96 M.T.)
10. Rawlley Engineers, B-56, I.E.,Rourkela
(Production Capacity as
per DIC – 200 M.T.)
11. Krishna Polymer (P)
Ltd., Railway Station
Road, Near Industrial
Estate, Bargarh.
(Production Capacity as
per DIC – 360 M.T.)
12. Arnapurna Plastics, B9, Indl. Estate,
Berhampur, Ganjam
(Production Capacity as
per DIC – 68 M.T.)(Valid
upto 29.01.2009)
TERMS OF DELIVERY & TAXES :
1. The rate is ex-factory, exclusive of value added tax and entry tax which may be charged extra as
admissible, if any.
2. Time allowed for delivery of goodsand the delivery schedule may be mutually decided between the
rate contract holder and the indenting officer.
RATE CONTRACT CIRCULAR NO.
41.
Description of the store
item
2211 dt.5.03.2008
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
LEATHER & FOOT-WEAR
ARTICLES.
a)
Sergeant
Boot/Ankle Derby
Boot
(Brown)
Detail specification
attached
at
Annexure-A.
Rate per
pair
500.00
16.02.2008(E)
b)
Officers
&
ASI
Shoes
(Brown)
Rubber
Sole.
Detail specification
attached
at
Annexure-B.
Rate per
pair
368.00
16.08.2007
c)
Sam
brown
Leather Belt made
out of Katai.
Rate per
pair
220.00
16.08.2007
1. M/s. Venus Shoes &
Leather Products,
Bhubaneswar.
2. M/s. Meher Shoe,
Industries, Bolangir.
3. M/s. New Steps,
Rourkela.
4. M/s. Premier Foot
Wears,Plot
No.18,N.H.5,
At/P.O.- Pahal,
Bhubaneswar
1. M/s. Venus Shoes &
Leather Products,
Bhubaneswar.
2. M/s. Meher Shoe,
Industries, Bolangir.
3. M/s. New Steps,
Rourkela.
4. P.K.Leather,
Sundargarh.
5. M/s. Premier Foot
Wears,Plot
No.18,N.H.5,
At/P.O.- Pahal,
Bhubaneswar
1. M/s. Venus Shoes &
Leather Products,
Bhubaneswar.
d)
ASI Belt (Black &
Brown) made out
of Katai.
Rate per
pair
98.00
16.08.2007
e)
Constable
Belt
(Black & Brown).
Rate per
pair
91.00
16.08.2007
2. M/s. New Steps,
Rourkela.
3. P.K.Leather,
Sundargarh.
4. M/s. Premier Foot
Wears,Plot
No.18,N.H.5,
At/P.O.- Pahal,
Bhubaneswar
1. M/s. Venus Shoes &
Leather Products,
Bhubaneswar.
2. M/s. New Steps,
Rourkela.
3. M/s. Premier Foot
Wears,Plot
No.18,N.H.5,
At/P.O.- Pahal,
Bhubaneswar
1. M/s. Venus Shoes &
Leather Products,
Bhubaneswar.
2. M/s. New Steps,
Rourkela.
3. P.K.Leather, New
Colony, Rangadhipa,
Sundargarh.
4. M/s. Premier Foot
Wears,Plot
No.18,N.H.5,
At/P.O.- Pahal,
Bhubaneswar
ANNEXURE-A
SPECIFICATION OF SURGENT BOOT (BROWN)/ANKLE BERBY BOOT.
29)
SCOPE:
This specification covers the requirements of shape design, pattern and size as per the
requirements of Orissa Police and the requirements of material quality and their sizes to be used
in different components and manufacture in line with the similar products prescribed by Bureau
of Indian Standard and other standards.
30)
SHAPE, DESIGN & PATTERN:
The surgeant boot shall be made out of brown chrome upper leather fitted with 7 pairs of eyelets
and cotton laces with well tanned compressed sole leather provided with full socks. The boots
shall be provided with half tongue and shall be made by riveted and stitched method of
construction.
31)
SIZE:
As per the requirements of the purchaser.
32)
MATERIALS:
The surgeant boots shall be manufactured with the following materials.
b)
Upper Leather:
Plain chrome leather of brown colour conforming to IS:578.
c)
Lining Leather: Vegetable tanned lining leather conforming to IS:3840/79 in vamp and
canvas lining at quarter conforming to IS:177.
d)
Socks : Chrome split leather conforming to IS:578.
e)
Bottom materials: Vegetable tanned compressed fuffalo (Sole and Heel) sole leather
conforming to IS:579 (Pt.I).
f)
Bottom Fillings: Leather currings both chrome or vegetable tanned leather
g)
Thread:
i) Upper closing: cotton thread, variety No.55 of IS:1720 or silk/synthetic/linen thread of
suitable quality mayo be used.
• Sole stitching: linen thread 90 tex x 8 construction having breaking load 23 kg. min at
50 cm. gauge length.
h)
Lace: Cotton lace, length 112 cm (44”) – Breaking load 23 kg. Min. at 50 cm gauge length.
i)
Toe Compound : A hard setting cement or gum compound.
j)
Grinderies:
A) Eyelets : Brass coated steel eyelets, 7.5mm collar dia, of brown colour conforming to
IS:5041.
B) Lasting Tacks – Rust proofed mild steel lasting tacks length 12±1mm & 10±1mm.
C) Rivets : Spear pointed mild steel blue cut tacks length 12±1mm.
D) Heel Pin : Rust proofed iron pins, size-25±1mm or spiral heel pin 32±1mm long.
E) Shanks : Galvanised steel shanks, width – 12mm, min. Thickness – 1.2 to 1.3mm.
33)
THICKNESS
(BROWN)/ANKLE DERBY BOOTS}.
Sl.
No.
a)
b)
c)
d)
e)
f)
g)
h)
OF
LEATHER
Components
Full Vamp
Quarters
Tongue & back strap
Quarter lining
Full socks
Insole
Middle sole
Outer sole & sole piece
COMPONENTS
Minimum
thickness
1.2mm
1.2mm
1.0mm
1.0mm
1.0mm
3.0mm
3.0mm
4.0mm
{SURGENT
BOOT
I)
j)
k)
l)
34)
Top piece of heel
Seat lifts & split lifts
Stiffness
Toe puff
4.5mm
2.6mm
2.1mm
1.5mm
MANUFACTURE:
Upper stitching – 25 to 30 stitches/cm, width of back strengthening leather - 25±1mm.
Top of loop from top to back within 13mm.
Quarter side stitching – three rows 2mm apart
Quarter face stitching – Two rows 20mm apart
Distance of top eyelets from top line of quarter - 25±1mm.
Top piece of heel shall be secured within19±1mm spear pointed brass rivets
Height of leg - 15±2mm for size 8, increase or decrease by 3mm from size to size.
Height of heel - 30±2mm for all sizes.
ANNEXURE-B
SPECIFICATION OF OFFICERS & ASI SHOES (BROWN) : WITH RUBBER SOLE/GENTS LEATHER
SHOES (BROWN)
1.
SCOPE
This specification covers the requirements of shape design, pattern and size as per the
requirements of Orissa Police and the requirements of material quality and their sizes to be used in
different components and manufacture in line with the similar products prescribed by Bureau of
Indian Standards and other Standards.
2.
SHAPE, DESIGN & PATTERN
Brown officers shoe, Derby design with toe cap made out of brown chrome leather upper
fitted with 5 pairs of eyelets, cotton laces and full socks, sole and heel should be made out
of micro rubber sheet.
3.
SIZE
As per the requirements of the purchaser.
4.
MATERIALS:- The Officers & ASI shoes,brown,with rubber sole/gents leather
shoes(Brown)shall be manufactured with the following materials:UPPER LEATHER:- Plain chrome tanned leather of brown colour conforming to IS:578.
Lining leather:a) For quarter-Vegetable tanned lining leather conforming to IS:3840
b) For Vamp- Cotton drill conforming to IS:174
Bottom materials:a) Insole & Middle Sole:-Vegetable tanned compressed sole leather conforming to
IS:579(Pt.I)
b) Outer sole & Heel – Micro rubber sheet of Sam thick (NIR or trot Brand).
Full socks:-Natural split leather.
Thread:a) Upper closing-Cotton thread mercerized, 3 ply or glazed 6 ply(Breaking load – 2 Kg. Min
at 50cm gauge length
Or
Silk or synthetic thread of suitable quality may be used subject to agreement between
the purchaser and supplier.
Adhesives for sole & heel – Dendrite adhesives PC-65 for attaching the Mirco-rubber sheet
for sole & heel.
Lace- Cotton lace 55cm. (22”) length, Minimum breaking load 23 Kg. at 18 cm. grip.
Grinderies:a) eyelets-Aluminium shoe eyelets, 6.3mm core dia matching to the shade of upper as per
IS:5041
b)
c)
Lasting Track-rust proofed mild steel lasting tacks, length 12±1mm & 10±1mm.
Rivets-Spear pointed mild steel Blue cut tracks, length 12±1mm.
d)
Shanks-Galvanised steel shanks wideth-12mm, Min, thickness-1.2 to 1.3mm.
4.9
The compounded:-A hard setting cement or gum compound.
5.
Thickness of leather compound:
(Officers & ASI shoes Brown with Rubber Sole)
Sl. No.
a
b
c
d
e
f
g
h
I
j
Components
Vamp
Quarters
Toe Cap
Tongue & Back Strap
Quarter Lining
Full socks
Insole
Middle sole
Stiffeners
Toe Puff
Minimum Thickness:
1.2mm
1.2mm
1.2mm
1.0mm
1.0mm
1.0mm
2.6mm
1.1mm
1.1mm
1.1mm
6.
Thickness of Micro Rubber sheet used in Sole & Heel – 8mm Min.
7.
Manufacture:- Upper stitching – 3 to 4 stitches/cm.
Height of finished heel – 25 to 28mm
TERMS OF DELIVERY & TAXES :
•
The rates are ex-factory, inclusive of cost of packing and exclusive of VAT and Orissa
Entry Tax which may be charged extra, as admissible if any.
•
The delivery schedule may be mutually decided between the rate contract holder and the
indenting officer.
RATE CONTRACT CIRCULAR NO. 4160 dt. 17.08.2006, 162 dt.6.1.07,2340 dt.7.4.07, 4230 dt.2.7.07
42.
Description of the
store item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
LEATHER PUMP
BUCKET &
SEAT VALVE.
Leather Pump Bucket
conforming
to
IS
No.1015/1956.
Size
1) 3½”
2) 3”
17.11.2005
Per each
1. Ambika Leather
Bucket
Bhubaneswar.
23.85
20.80
Leather Seat Valve
conforming
to
IS
No.1015/1956.
Size
1) 3½”
2) 3”
Per each
14.75
13.75
TERMS OF DELIVERY & TAXES :
RATE CONTRACT CIRCULAR NO. 4412 dt. 18.11.2004
43.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
M. S. PANNELED DOOR &
WINDOW
1. M.S. Panelled
door
double leaved with M.S.
Frame,
over
all
size
including frame, 1980 mm
H x 1070 mm W made out
of the following materials
conforming to relevant
Indian
Standard
Rate per
Kg.
33.80
05.03.2008(E)
(As indicated
against each
unit)
1.
2.
3.
Choudhury Fabrication Works,
At/P.O. Bamra,
Sambalpur.
Konark Enterprises,
A-40, I.E., Cuttack10.
Sri Lakshmi
Specification.
Frame: 35x35x6mm M.S.
Angle Shutter Stile: Top &
Bottom rail 25x25x3mm
M.S. Angle.
4.
Door Panel : 1.0mm C.R.
Sheet Panel stiffener
covering width of each leaf
– 19x5mm. M.S. Flat 3
nos. on each leaf. Hinges:
Size 100mm-6 nos (3 nos.
on each side) bought out
as per ISS. Hold fast.
35x35x6mm M.S. Angle
175mm length bifurcated
at the top – 3 nos. on each
side.
Handle : 19x5mm M.S.
Flat, fabricated-04 Nos.
Aldrop : 2 Nos. bought out
as per ISS Tower Bolt – 2
Nos. bought out as per
ISS. Approximate Weight –
54 kg.
2. M.S. Pannelled
Door
Single leaved with M.S.
frame,
over
all
size
including frame, 1830mm
Height x 910mm width
made out of following
materials conforming to
relevant ISS.
Frame: 30x30x5mm M.S.
Angle Shutter Stile: Top &
Bottom rail 25x25x3mm
M.S. Angle. Door Panel :
1.0mm C.R. Sheet.
Panel stiffener covering
width of leaf – 19x5mm.
Flat 3 nos. Hinges: Size
100mm-3nos bought out
as per ISS.Hold fast.
30x30x5mm M.S. Angle
150mm length bifurcated
at the tip – 3 nos. on one
side. Handle : 19x5mm
M.S. Flat, fabricated02Nos. Aldrop : 2 Nos.
bought out as per ISS.
Tower Bolt – 2 Nos. bought
out as per ISS.
5.
6.
7.
8.
9.
10.
11.
32.00
12.
13.
14.
15.
16.
Industries, Kakigaon
Road, Semiliguda764036 Dist.
Koraput.
Labanya Industries,
At/P.O. Khalari,
Angul759122.
Padma Auto Body
Builders, Plot
No.144-A, Zone-C,
New I.E., Jagatpur,
Cuttack.
Utkal Metal Products
Pvt. Ltd., C-3,
Industrial Estate,
Berhampur760010,
Dist. Ganjam.
Agarwalla
Fabricators, At/P.O.
Attabira, Dist.
Bargarh.
Aroni Steel
Industries, At/P.O.
Khariar, Dist.
Nuapada.
Mina Fabrication &
Welding Works, Main
Road, Umerkote,
Nabarangpur.
Orissa Agrico (P) Ltd.,
B-9, I.E., Cuttack-10.
Vijay Engineering,
At/P.O. Rathunathpur, Ward No.22,
Kaiphulia, Baripada757001, Mayurbhanj
Leo Engineers (P)
Ltd., 93-B, New I.E.,
Phase-II, Jagatpur,
Cuttack.
Kishan Udyog, Canal
Avenue, Dist.
Bargarh-768028.
Panigrahi Fabricators
& Engg. Workshop,
Shantipada, Near
College Square,
Bolangir.
Sreema Steel
Furniture Works,
Industrial Estate,
Sunabeda-763001,
Dist. Koraput.
Kalinga Industries,
11/2, I.E., Baraipali,
Approximate Weight –
36.5kg.
3. M.S. Pannelled Window
double leaved with M.S.
frame and grill over all size
including frame, 1220mm
Height x 910mm width
made out of following
materials conforming to
relevant
ISS.
Frame:
35x35x6mm M.S. Angle.
Shutter
Stile:
Top
&
Bottom rail 25x25x3mm
M.S. Angle. Window Panel
: 1.0mm C.R. Sheet.
Panel stiffener covering
width of each leaf –
19x5mm.
M.S. Flat 2 nos. of each
leaf. Hinges: Size 100mm4nos. 2 Nos. on each side
bought out of ISS. Hold
fast. 35x35x6mm M.S.
Angle 100mm length
bifurcated tip –2 nos. on
one side. Handle :
19x5mm Flat, 2 Nos.
fabricated(inside).
Tower Bolt – 4 Nos. bought
out as per ISS.
Horizontal Grills : 12 mm
M.S. Round at 100mm
spacing.
Approximate Weight –
39kg.
4. M.S. Pannelled Window
single leaved with M.S.
frame and grills over all
size
including
frame,
760mm Height x 610mm
width
made
out
of
following
materials
conforming to relevant ISS.
Frame: 30x30x5mm M.S.
Angle. Shutter Stile: Top &
Bottom rail 25x25x3mm
M.S. Angle. Window Panel
: 1.0mm C.R. Sheet.
Panel stiffener covering
width of
each leaf –
19x5mm.
M.S. Flat 1 No. Hinges:
Size 100mm-2nos bought
17.
18.
19.
29.10
20.
21.
22.
23.
24.
25.
32.90
Sambalpur-768150.
Samaleswari
Fabrication Work,
At/P.O. Khariar,
Dist. Nuapada766107.
Ashutosh Steel
Industries,
Chandrasekhar
Nagar, Dist.
Bolangir.(Valid upto
29.03.2007)
Shiva Shankar Engg.
Works & Traders,
Nilakantheswar
Mandir Road,
Jeypore, Dist.
Koraput-764003.
(Valid upto
21.10.2006).
Hindustan Engg. &
Fabrication
Industries, NKT
Road, Jeypore764003, Dist.
Koraput. (Valid upto
31.03.2007)
Sahoo Fabrication,
At/P.O. Bamra,
Station Basti,
Sambalpur (Valid
upto 15.09.2006)
Neelatara Fabrication (Blue-Star)
Fabrication Unit,
Municipality Stall
No.1&2, Block-3,
M.G. Road, Jeypore,
Koraput.(Valid upto
21.7.2007).
Nanda Industries, Atcontractor Colony,
Burla,
Dist:Sambalpur
(Upto 5.9.07)
Nanda enterprises,
At- Contractor
Colony, Burla,
Sambalpur (Upto
5.9.07)
Maruti Engineering
Works, At/P.O. Bell
Road, Jeypore,
Koraput (Upto
8.8.07)
out of
ISS. Hold fast.
30x30x5mm M.S. Angle
100mm length bifurcated
tip –4 (2nos. on one side.)
Handle : 19x5mm
M.S.
Flat. fabricated 2 nos.
(inside). Tower Bolt – 2Nos.
bought out as per ISS.
Horizontal Grills : 12 mm
M.S. Round at 100mm
spacing .
Approximate
Weight
–
17.5kg.
26.
General Fabrication
& Engineering
Works, at/p.o. –
Semiliguda, Koraput
(Upto 5.9.07)
TERMS OF DELIVERY & TAXES :
•
The rates are ex-factory, exclusive of VAT/entry tax which may be charged extra as legally
leviable if any.
Minimum time allowed for delivery of goods is as follows:
a) Order upto …Rs. 5000/- …………………
30 days
b) Orders from Rs.5000/- to Rs.10000/- ..
45 days
c) Orders for every subsequent of Rs.5000/- … 15 days
However the delivery schedule may be mutually decided between the rate contract holder and
the indenting officer.
•
•
RATE CONTRACT CIRCULAR NO. 4442(200)/EPM dt. 06.09.2006, 6482 dt.7.12.06, 177 dt.6.1.07,
2092 dt.19.3.07, 2762 dt.24.4.07, 3621 dt.4.6.07, 7463
dt.15.10.07, 8807 dt.22.12.07
44.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
M.S.VERANDAH GRILL:
M.S.Varandah Grill made
out of M.S.Angle 25x25x3
mm at the Periphery &
M.S.Flat 25x6 mm in the
inner design conforming to
IS:1977/96with hold fast
made out of M.S.Angle as
used in periphery as per
the Design approved by
the purchaser.
Rate
Kg.
per
36.70
01.02.2009
(Subject to
validity of
EP&M Regn. &
VAT Clearance
Certificate)
As per table below.
NAME OF THE UNITS:
1.
2.
3.
4.
Mohanty Engg. Works, Plot No.1530, Naharkanta, Hanspal, Bhubaneswar. (Prpduction
capacity as per DIC – 60 M.T.)
Meera Fabriation, Near Nehrugali, Padmapur, Rajaborasamber, Bargarh (Prpduction capacity
as per DIC – 18 M.T.)
Agarwalla Fabricators, At/P.O. Attabira, Bargarh (Prpduction capacity as per DIC – 6 M.T.)
Choudhury Fabrication Works, At/P.O. Bamra, Sambalpur (Prpduction capacity as per DIC –
5.
6.
7.
8.
9.
10.
11.
15 M.T.)
Dev Steel Industry, Plot No.4/330, Raghunathpur, Nuagaon Chhak, Bhubaneswar
(Prpduction capacity as per DIC – 8 Lakhs
Maa Metal Industries, At/Ganesh Bazar, Phulbani, Kandhamal (Prpduction capacity as per
DIC – 60 M.T.)
Sahoo Fabrication, At/P.O.-Bamra,Sambalpur (Prpduction capacity as per DIC – 10 M.T.)
Jena Engineering Works, Utkal ashram Road, Berhampur, Ganjam (Prpduction capacity as
per DIC – 84 M.T.)
Sreema Steel Furniture Works, Indl. Estate,Sunabeda,Koraput
Monashis Steel & Agriculture Industry, At/Bhatli Road, Baragarh (Prpduction capacity as per
DIC – 9 Ton)
Leo Engineering (P) Ltd., 93-B-1,New Indl. Estate,Jagatpur,Cuttack (Prpduction capacity as
per DIC – Rs.20,00,000/-)
TERMS OF DELIVERY:
1)
2)
The rate is ex-factory & exclusive of value added tax and excise duty which may be
charged extra as admissible, if any.
Minimum time allowed for delivery of goods and the delivery schedule may be
mutually decided between the indenting officer and the rate contract holder.
RATE CONTRACT CIRCULAR NO. 954 dt.02.02.2008
45.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
M.S.WINDOW GRILL
M.S.Window grill made out
of M.S. Flat conforming to
IS: No.1977/1996 as per
the design approved by the
purchaser
Per Kg.
37.65
01.02.2009
Noted
against
each unit &
Subject
to
validity of EPM
registration and
VAT clearance
certificate.
NAME OF THE R/C HOLDING UNITS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Agarwala Fabricators, At/P.O. Attabira, Dist. Bargarh-768027. (Annual Production Capacity – 6
MT as per DIC Regn. Certificate)
Orissa Agrico (P) Ltd., B-9, I.E., Cuttack-10.
Indravati Engineering Works, At-ITI Road, Bhawanipatna, Kalahandi.
Dev Steel Industry, Plot No.4/330, Raghunathpur, P.O. Samantarapur, Nuagaon Chhak,
Bhubaneswar(Annual Production Capacity – 8 lakh as per DIC Regn. Certificate)
Mina Fabrication & Welding Works, Main Road, Umerkote, Nawrangpur
Shiva Sankar Engg. & Traders, Nilakantheswar Mandir Road, P.O. Jeypore, Dist. Koraput.
(Annual Production Capacity – 120 MT as per DIC Regn. Certificate)
Nanda Enterprises, At/P.O.-Burla, Sambalpur(Annual Production Capacity – 18 MT as per DIC
Regn. Certificate)
Meera Fabrication, At-Near Nehrugali, Padmapur, Rajabarasambar, Baragarh(Annual
Production Capacity – 18 MT as per DIC Regn. Certificate)
Choudhury Fabrication Works, At/P.O.-Bamra, Sambalpur(Annual Production Capacity – 15
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
MT as per DIC Regn. Certificate)
Konark Enterprises, A-40,I.E.,Cuttack-10
Mohanty Engg. Works, Naharkanta, Hanspal, Bhubaneswar, Dist. Khurda(Annual Production
Capacity – 60 MT as per DIC Regn. Certificate)
Annapurna Fabricators, Main Road, Gosani Nuagaon, Berhampur(Annual Production Capacity
– 24 Ton as per DIC Regn. Certificate)
Nanda Industries, Contractor Colony, Burla, Sambalpur
Jena Engineering Works, Utkal Ashram Road, Berhampur(Annual Production Capacity – 84 MT
as per DIC Regn. Certificate)
Chhatia Panchayat Industries Light Engg. Co-operative Society Lt., At/P.O.-Chhatia,
Jajpur(Annual Production Capacity – 240 MT as per DIC Regn. Certificate)
Monashis Steel & Agriculture Industry, Bhatliroad, Baragarh(Annual Production Capacity – 9
MT as per DIC Regn. Certificate) (Valid upto 6.6.2008)
Maa Metal Industries, At-Ganesh bazaar, Main road, Phulabani( Valid upto 18.3.2008)
Sambit Enterprisers, Plot No.86,New I.E.,Jagatpur, Cuttack(Annual Production Capacity –
35,00,000/- as per DIC Regn. Certificate)( Valid upto 16.6.2008)
Leo Engineers (P) Ltd., 93-B, New I.E., Phase-II, Jagatpur, Cuttack. (Annual Production
Capacity – 20,00,000/- as per DIC Regn. Certificate)(Valid upto 24.6.2008)
Murarka Industry, Khetarajpur,Sambalpur(Annual Production Capacity – 12 MT_
TERMS OF DELIVERY & TAXES :
1. The rate is ex-factory, exclusive of VAT and excise duty which may be charged extra as admissible, if
any.
2. The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided
between the rate contract holder and the indenting officer.
Rate Contract Circular No. 933 dt.02.02.2008, 1810 dt.1.3.2008
46.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
30.8.2008
1. M/s. Laxmi Electrical
Industries, New I.E.,
Plot No.88, Jagatpur,
Cuttack.
MAIN SWITCH
Metal
clad
Fuse
Combination
used
in
distribution circuit and
motor circuit the rated
voltages of which does not
exceeding 1000 VAC 50Hz
or 1200 VDC conforming
to IS:4064 (Pt.I), IS:4064
(Pt-II)
with
utilization
category AC – 22.
Size:
16 Amp 240 VDP
16 Amp 415 VTP
32 Amp 240 VDP
32 Amp 415 VTP
63 Amp 415 VTP
100 Amp 415 VTP
Rate per
unit
182.00
350.00
302.00
454.00
1161.00
The enclosures shall be
made of at least 1.6mm
C.R. Sheet steel with
adequate mechanical &
electrical endurance to
withstand tests as per
relevant IS.
2115.00
TERMS OF DELIVERY & TAXES :
a.The rates are ex-factory inclusive of excise duty and exclusive of Orissa Entry tax and VAT
which may be charged extra, as admissible, if any.
b.
The delivery schedule may be mutually decided between the rate contract holder and the
indenting officer.
Rate Contract Circular No. 6636 dt.31.8.07
47.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
METAL ROLLING
SHUTTER.
Metal
Rolling
Shutter,
conforming to IS:6248/71
Specifi-cation
of
metal
Rolling shutter conforming
to IS No.6248/71.
Per kg.
38.70
26.03.2009
1. Choudhury
Fabrication Works,
At/P.O.- Bamara,
Sambalpur (
Production capacity
as per DIC 10 Ton)
2. Agarwala Fabricators,
At/P.O.-Attabira,
Dist. Bargarh768027.
3. Sahoo Fabrication,
At/P.O. Bamra
(Station Basti),
Sambalpur-768221 (
Production capacity
as per DIC 10 Ton)
4. Rinki Steel Industries,
Kasaipada, P.O.
Rajendra College,
Bolangir
5. A.H.Industries,
Nayachouk,
Madhupatna,
Cuttack-10
Measurement of Shutter:
1. Height – Actual height of the wall opening and height of the wall covered by the bracket plate.
2.
i)
Breadth:- For shutter having width up to 3.5 mtrs. - Actual breadth of the wall opening
plus 130 mm.
For shutter having width 3.5 mtrs. and above up to 8 mtrs. – Actual breadth of the
wall opening plus 150 mm.
3. Curtain : - The thickness of the steel sheet for which the lath sections have been rolled shall be
of 0.9 mm for shutter up to 3.5 mtrs. Width and 1.25 mm thick sheet for shutter above 3.5 mtrs.
Width.
4. Lock Plate: A fabricated lock plate of revetted construction made of mild steel sheet of 3.15 mm
thickness reinforced with mild steel angles section of 35 x 35 x 5 mm size at the bottom shall be
interlocked with bottom moth lath sections of curtain, so as to provide contract against the steel
when closed. Alternatively the lock plate may also be fabricated out of unequalled mild steel
angles or “TEE” section.
ii)
Guide Channel
Clear width of shutter
i) Up to 3.5 Mtrs
ii)3.5 mtrs and above up to 8 mtrs.
Depth of the guide channel min.
.…
….
65 mm
75 mm
5. Bracket Plates : It shall be fabricated out of mild steel sheet of 3.15 mm thickness. The
thickness and size of the bracket plate shall be proportionately higher for different height of
rolling shutters.
6. Roller :- The suspension shaft of the Roller shall be made of steel conforming to heavy duty of
ISS No.1161/60, specification for steel tube for structural purpose (Second Revision) and of
sufficient diameter so as to resist deflection and shall not exceed 5 mm per meter width.
7. Hood Cover : Hood cover shall be made of mild steel of 0.90 mm thick. Safety divides for width
up to 2.5 mtrs. properly fabricated and reinforced bottom lock plate shall be provided to give
protection. For width above 2.5 mtrs. Safety device of anchoring rods or centre hasp and staple
as per 7.9.1. and 7.9.2 of ISS may be provided.
TERMS OF DELIVERY & TAXES :
•
The rate is ex-factory, exclusive of value added tax and Orissa entry tax which may be
charged extra as admissible, if any.
a) The minimum time allowed for delivery of goods the delivery schedule may be mutually
decided between the rate contract holder and the indenting officer.
Rate Contract Circular No. 2288 dt.27.3.2008
48.
Description of the store
item
Unit
METAL TABLE:
Metal Table (office type)
conforming
to
IS
No.3498/93
with
steel
frame and steel top with
the following specification.
1. Frame and foot rest
made out of ERW mild
steel square tubes
25x25x1.25mm size.
Per each
Rate per
unit
Rs.
Period of
validity
15.05.2008(Ext
ension
vide
circular
No.8519
dt.11.12.07)
Name of the rate contract
holding SSI units
As per table below:
2. Top made out of
1.25mm thick C.R.
Sheet.
3. Drawer box and cup
boards made out of 1
mm C.R. Sheet.
4. Lock: The lock should
be with 6 levers with
keys of non-corrosive
materials conforming
to IS No.729/1979.
5. Knee space width –
560 mm min.
Size of the Table:
48”x Width 24” x 30”
Height with 3 drawers.
Drawer Box size: 22” x
14” x 17” Depth x width x
height.
54” x 30” Depth x 30”
height with 3 drawers and
one cup board (Drawer
box
size
22”x14”x17)
(Depth x width x height).
Cup board wise : 22”
Depth x 14” Width x 17”
height.
Metal Table (Office Type)
conforming to IS No.
3498/93 with steel
frame and 18 mm prelaminated board with
the
following
specification:
1. Frame and foot rest
made out of ERW mild
steel square tube 25”
x 25” x 1.25 mm size.
2. Top made out of 18
mm
pre-laminated
board.
3. Drawer box made out
of 1 mm C. R. Sheet.
4. Lock : The lock shall
be with 6 levers with
keys of non-corrosive
materials conforming
to IS:729/1979.
2298.00
3329.00
5. Handle: Each drawer
shall be fitted with
corrosion
resistance
metal handle.
6. Knee space width 560
mm min.
48”Wx24”Dx30”h with 3
drawer, Drawer box size
22”x14”x17” (DxWxH).
2636.00
60”Wx36”Dx30”H with 3
drawers and one cup
board (Drawer box size:
22”x14”x17” (DxWxH).
3935.00
72”Wx36”Dx30”h with 3
drawer and one cup
board. Drawer box size :
22”x14”x17” (DxWxH) cup
board size : 22”x14”x17”
(DxWxH).
4085.00
42”Dx24”Wx30”h with 2
drawers also with the
following
specification.
Drawer
Box
size
:
22”x14”x12” (DxWxH).
42”Dx24”Wx30”H without
drawer and cup board
and with foot rest.
2331.00
966.00
TERMS OF DELIVERY & TAXES :
1. The rates are ex-factory exclusive of Value Added Tax and entry tax which may be charged extra as
admissible if any.
2.The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided
between the rate contract holder and Indenting Officer.
Rate Contract Circular No. 5936 dt.16.11.06, 6786 dt. 23.12.06, 432 dt.12.01.07, 956 dt.8.2.07,
2070 dt.16.3.2007,3263 dt.23.5.2007,5570 dt.13.7.07,7187
dt.29.09.07,8519 dt.11.12.07, 197 dt.7.1.08,1093 dt.7.2.08
NAME OF UNITS HOLDING R/C.
1. Konark Industries, S-11, I.E., Madhupatna, Cuttack.
2. Sri Ram Industries, A-4, I.E.,Rasulgarh, BBSR
3. Ashoka Engineering, 2nd Chandraprava Street, Berhampur.
4.Meera Industries, Hemsurpara,Angul
5. Subhasree Steel Industries, Plot No.4756/6012, VSS Nagar, Bhubaneswar.
6.Shrikrushna Steel Industries, 372, Shastrinagar, Unit-4, Bhubaneswar.
7.Shakti Enterprisers, I.E., Berhampur.
8.CEF Engineering, Plot No.17, Rasulgarh, Bhubaneswar.
9.Devi Engineering Enterprises, Mining Sqr., Keonjhar
10.Ashirbad Industries, Darakhapatna, Kalyaninagar, Cuttack.
11.Steelex Industries, A.B. Road, Nimasahi, Cuttack-1.
12.Vasavi Steels, Bhapur Bazar, Berhampur.
13.Basanti Industries, Netajingar,I.E.,Cuttack-10
14.Metalex Industries, C-14, I.E.,Cuttack-10
15.Prince Steel Industry, Plot No.179-A,Zone-B.,Mancheswar I.E.,Bhubaneswar
16.Laxmi Metal Industries, DFO Chouk,Phulbani
17.Shakti Engineering & Steel, Korian, Dhenkanal.
18.Sanjeeb Enterprises, Jagannath Road, Madhupatna, Cuttack
19.Jagannath Industries, Station Road, Baripada, Mayurbhanj.
20.Steel Tek, At. Hatatota Road, Talcher, Angul.
21.Priya Steel Industries, 288, Rasulgarh, Bhubaneswar.
22.Deluxe Steel Industries, Plot No.738,Jail Road, Jharpada, Bhubaneswar
23.Green Gospeller, Plot No. 136, I.E., Mancheswar, Bhubaneswar
24.Shree Jagannath Steel Industries,At-Bisinagar, Chhatrabazar, Canal Road, Cuttack
25. Rinki Steel Industries, At. Kasaipada, P.O. Rajendra College, Dist. Bolangir
26. Orissa Agrico Pvt. Ltd., B-9, I.E., Cuttack.
27.Mealonie Colour Chamber, Infront of Viswamber Vidyapitha, Puri.
28. Orissa Steel & Wire Products (P) Ltd., B-14, I.E., Cuttack-10.
29. Kartik Enterprises (P) Ltd., I.E., Cuttack-10.
30. Labanya Industries, At/P.O. Khalari, Dist. Angul.
31. Konark Enterprises, A-40, I.E., Cuttack-10.
32. A.H. Industries, Nayachouk, Madhupatna, Cuttack.
33. Rollex Enterprisers, I.E., Cuttack-10.
34. Sonax Industries, At. Kajidiha, Khapuria, Cuttack-10.(Upto 21.03.2008)
35.Padma Auto Body Builders, Plot No.114/A, Zone-C, New I.E., Jagatpur, Cuttack.
36.Classic Metal Products, Jagannath Road, I.E., Cuttack-10
37.Sana Iron & Steel Industries, Main Road, DNK, Malkanagiri
38.Krishna Industries, Nayachowk, Madhupatna, Cuttack.
39.Dev Steel Industries, 4/330, Raghunathpur, Nuagaon Chhak, Bhubaneswar.
40.Kalinga Equipments, New I.E., Mancheswar, Rasulgarh, Bhubaneswar
41.Maa Metal Industries, Ganesh Bazar, Main Road, Phulbani.
42.Kiran Enterprises, Gopalgaon, Chuna Bhati, Balasore.
43.Narayani Welding Workshop, I.E., Gosaninuagaon, Berhampur, Ganjam.
44.Xenium & Xenium, Uditnagar, Rourkela.
45.Krishna Steel Industries, M.G.Road, Jeypore
46.Unique Enterprises, Netajinagar(Khanagar),Cuttack-10(Upto 5.2.08)
47.M.N. Engineering, Plot No.71, Fishery Lane, Chintamaniswar, Bhubaneswar.
48.Ashutosh Industries, Plot No.211/F.,Sector-A, Zone-B, Mancheswar, I.E., Bhubaneswar
49.Vijaya Steel Industries, M.G.Road, Jeypore
50.Hesper Industries, Palasuni, Rasulgarh.
51.Raja Steel Industries, Ranipeta, Paralakhemundi, Gajapati
52.Uma steels, Aska Road, Near Gate bazaar, Berhampur
53.Bhagyalaxmi Steel Furniture Works, At. Canal Street, Gate Bazar,Berhampur
49.
54.Pravat Steel Industries, At/P.O.-Kankadapal, Dhenkanal
55.Kalinga Industries, 11/2, I.E., Baraipali, Sambalpur
56.Sahu Steel Industries, At-Junudihi, Sambalpur Road, Bolangir.
57.Leo Engineering (P) Ltd., 93-B, New I.E., Jagatpur, Cuttack
58.Shah Industries, I.E.,Baraipali, Sambalpur
59.Sahoo Fabrication, At/P.O.-Bamra, Sambalpur
60.Swasti Furniture Industries, Plot No.72/D, Sector-A, Zone-D, I.E.,Mancheswar,
Bhubaneswar(Upto 3.3.08)
61. Monashis Steel & Agriculture Industries, At-Bhatili Road, Word No.7, Dist.Bargarh
62. Mahalaxmi Steel Industries, Durgabazar, Jagatsinghpur
63.Allied Industries,B-1,I.E.,Cuttack-10
64.Sree Aurobinda Fabrication,At-Hasinpur,P.O.-Ganiganja,Via-Baripada,Bhadrak
Description of the store
Unit
Rate per
Period of
Name of the rate contract
item
unit
validity
holding SSI units
Rs.
M. S. /G. I. PIPES,
FITTINGS & FLANGES
Rate per
1. G. I. Socket confor-ming unit.
to
IS
No.1239
05.12.2008
1.
M/s. Surekha
(Pt.II)/1992
Industries, At/P.O.
Jagatpur, Cuttack15 mm
10.50
Kendrapara Road, Dist.
20mm
11.50
Cuttack-754921. (Annual
25mm
16.50
production capacity as
32mm
21.50
reflected in the DIC PMT
40mm
26.00
Regn. Certificate 7200
50mm
35.50
nos., 9600nos., 7200
65mm
50.50
nos., 7200nos.
80mm
77.00
100mm
109.00
125mm
146.50
150mm
206.50
2.G.I. Tee conforming to IS
No.1239 (Pt.II)/ 1992 15
mm
15mm
20mm
25mm
32mm
40mm
50mm
65mm
80mm
100mm
125mm
150mm
30.00
35.50
50.50
69.00
92.00
132.00
197.50
327.00
494.50
734.00
1120.50
2. G.I. Bends confor-ming
to
IS
No.
1239
(Pt.II)/1992
15 mm
20mm
30.00
46.00
25mm
32mm
40mm
50mm
65mm
80mm
100mm
125mm
150mm
4.G.I. Screw Bass flanges
conforming to IS No.
6392/71
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100mm
125mm
150mm
5.Plate flanges conforming
to IS No.6392/1971
15 mm
20mm
25mm
32mm
40mm
50mm
65mm
80mm
100mm
125mm
150mm
175mm
200mm
250mm
300mm
62.00
91.50
102.00
165.00
246.00
312.00
575.00
1146.00
1494.00
79.00
93.00
102.50
136.50
157.00
183.50
227.50
309.00
361.50
494.50
574.00
72.00
89.50
102.00
140.50
158.00
198.00
242.00
305.50
351.00
475.00
600.00
721.50
818.00
1235.50
1729.00
TERMS OF DELIVERY & TAXES :
It was decided that unit who has not registered with Excise Authority will give an undertaking that they
are not availing MODVAT benefits on procurement of Ra-material. If during the period of contract
MODOVAT benefit is availed they will intimate to this Directorate immediately for revision of rate. In
case of SSI units registered with the Excise Authority the unit concerned have to furnish a certificate
from Central Excise Office that the units is not availing MODOVAT/CENVAT benefit against purchase of
raw-material for manufacture of the said item covered under EP&M rate contract. After receipt of
undertakings/ certificate, rate contract will be concluded either exclusive or inclusive of Excise Duty on
the basis of undertaking/certificate.
The rate recommended for conclusion of rate contract are ex-factory and exclusive of value added tax.
The delivery period may be mutually decided between the Indentor and rate contract holder.
Rate Contract Circular No. 8454 dt.6.12.07
Description of the store
item
50.
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
MINERAL MIXTURE
1.
Mineral mixture for
supplementing poultry
feeds conforming to IS
No.5672/92.
2.
Mineral Mixture for
supplementing
cattle
feed conforming to IS
No.1664/92 (Type-II).
Rate per
Kg.
11.50
26.02.2008
1. M/S. Baal Agrovet &
Chemical Industries (P)
Ltd., 41, New I.E.,
Jagatpur, Cuttack-21.
PARALLEL:
20.00
2. Usha Ayurvedic
Pharmacy, Meriabazar,
Cuttack.
TERMS OF DELIVERY & TAXES :
•
•
The rates are ex-factory inclusive of cost of packing and exclusive of value added tax and
entry tax which may be charged extra, as admissible, if any.
Minimum time allowed for delivery of goods
a) Orders upto Rs.10,000/…
b) For every additional Rs.10,000/- …
•
7 days
7 days.
However the delivery period may be mutually decided between the indentor and the rate
contract holder.
Rate Contract Circular No. 1279 (200) dt. 27.02.2006, 3690(200) dt. 21.07.2006.
Description of the store
item
51.
NITRILE RUBBER PUMP
BUCKET & SEAT VALVE
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
Rate per
each
1. ISI Marked Nitrile
Rubber Pump
Bucket as per IS
No.14104/94.
10.15
2. ISI Marked Nitrile
Rubber sealing’
Ring
for
India
Mark-II, Deep Well
Hand Pump as per
IS No.14104/94.
7.70
26.04.2008
(Extension vide
circular
No.8186
26.11.07)
1. Orissa Rubber
Products,
At. Saraswatipur,
O.T. Road,
P.O./Dist. Balasore.
3. ISI Marked Nitrile
Rubber sealing’
Ring
for
India
Mark-III , Deep
Well Hand Pump
(VLOM) as per IS
No.14104/94
5.35
4. ISI Marked Nitrile
Rubber sealing’
Ring (lower valve)
as
per
IS
No.14104/94.
6.10
5. ISI Marked Nitrile
Rubber sealing’
Ring (upper valve)
as
per
IS
No.14104/94
2.60
6. ISI Marked Nitrile
Rubber sealing’
Ring (Lower valve)
for India Mark-III,
Deep Well Hand
Pump (VLOM)
as
per
IS
No.14104/94
5.10
7. ISI Marked Nitrile
Rubber ‘O’
Ring
for
India
Mark-III, Deep Well
Hand
Pump
(VLOM) as per IS
No.14104/94
2.95
TERMS OF DELIVERY & TAXES :
The rates are ex-factory, inclusive of cost of packing & exclusive of Value Added Tax and Orissa Entry
Tax which may be charged extra as admissible if any.
The delivery schedule may be mutually decided between the rate contract holder and the Indenting
Officer.
Rate Contract Circular No. 5500 dt.27.10.06
52.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
NYLON SOCKS
Nylon Socks, plain knitted
type with reinforced heel
Rate per
pair
28.50
09.08.2008(Ext
ension vide
1. Orissa Wool Industries,
B-24, I.E., Cuttack-
and toe, made out of yard
nylon yarn, liner density
30 Tax, top knitted with
double
layer
covered
elastic yarn, khaki colour
and free size (adults) as
per approved sample of
I.G. of Orissa Police,
Cuttack
circular
No.8746
dt.19.12.07)
10. (Annual
Production Capacity60,000 pairs)
Weight of 10 pairs of
socks. 600 gm. Minimum
foot length 270 ± 5mm
length of socks (leg length)
320±5mm Dept of rib top
portion: 50±5mm Width of
foot length at centre
100±5mm
TERMS OF DELIVERY & TAXES :
The rate is ex-factory, inclusive of cost of packing & excuse duty but exclusive of Value Added Tax and
Orissa Entry Tax which may be charged extra as admissible if any.
The delivery schedule may be mutually decided between the Indenting Officer and the rate contract
holding SSI unit.
Rate Contract Circular No. 6201 dt.10.08.07
53.
Description of the store
item
Unit
Rate per
unit
Rs.
12.25
Period of
validity
Name of the rate contract
holding SSI units
OFFICE PASTE
Per Kg.
27.11.2008
M/s. B.K.Products, SE-12,
Office Paste, Type-B 300
I.E., Cuttack-10( Annual
ml. net packed in plastic
production capacity
container with stapper &
Rs.3,00,000/bruch conforming to IS:
No.2257/89
TERMS OF DELIVERY & TAXES :
The rate is ex-factory, inclusive of cost of packing & exclusive of Value Added Tax and Orissa Entry Tax
which may be charged extra as admissible if any.
The delivery schedule may be mutually decided between the Indenting Officer and the rate contract
holding SSI unit.
Rate Contract Circular No. 99 dt.04.01.2008
54.
Description of the store
item
Unit
Rate per
unit
Rs.
ORS POWDER:
ORS Powder (WHO/
Citrate formula)
Period of
validity
Name of the rate contract
holding SSI units
19.02.2008
20.5 gms
in pack
1.82
1. 1. Jagannath
Chemical &
Pharmaceutical
Works (P) Ltd.,
Nayasarak, Cuttack.
2. Monday Medicines,
3.
4.
5.
6.
Sekhbad, Jaleswar,
Balasore.
Swaraj Chemical &
Pharmaceutical
Works, Plot No.21 &
22, I.E. New,
Jagatpur, Cuttack.
Eastern Chemical
Industries (P) Ltd.,
I.E., Cuttack-10
Trimurty Chemical
Industries, 31,
Cantonment Road,
Cuttack-1(Upto
31.12.07)
Kingsy
Pharmaceutical
Works, D-216,
Mancheswar, I.E.,
Bhubaneswar
(Annual Production
capacity 1.80 lakh
packets)(Upto
31.12.07)
TERMS OF DELIVERY & TAXES :
1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax which may be
charged extra as admissible if any.
2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations
charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of
one year from the date of issue of rate contract.
3.The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
Rate Contract Circular No. 1223 dt.20.2.07,1373 dt.23.2.07, 6231 dt.13.8.07, 7162 dt.29.9.07
55.
Description of the store
item
PAINTS:
Unit
Rate per
unit
Rs.
21.10.2008
76.00
71.00
2. Enamel Paints interior
IS:133/75.
White
1. 4 Ltr. container
Name of the rate contract
holding SSI units
Ltr./kg
1.Aluminium Paints IS:
2339/75
1. 4 Ltr. container
2. 20 Ltr. container.
Period of
validity
67.17
1.
Rollex Paints &
Chemicals, I.E.,
Cuttack
(Sl.No. 1 to 18, 21 &
23 to 26 ( Total 24
items)
2. Garnet Paints &
Chemicals, I.E., Phase-II,
Jagatpur, Cuttack
(From Sl.No.1 to 5, 7 to 18,
2. 20 Ltr. container
Black.
Chocolate.
62.56
Rex-oxide,
1. 4 Ltr. container
2. 20 Ltr. container
55.30
51.10
Other Colour:
1. 4 Ltr. container
2. 20 Ltr. container
3.
Synthetic
Enamel
Exterior
finishing
IS
No.2932/74.
66.35
62.30
White:
1. 4 Ltr. container.
2. 20 Ltr. container.
Black,
Chocolate.
83.50
78.60
Red-oxide,
1. 4 Ltr. container
2. 20 Ltr. container
71.60
61.10
Other Colour:
1. 4 Ltr. container
2. 20 Ltr. container
81.00
76.00
4.
Enamel
Exterior
finishing IS:2933/75:
White:
1. 4 Ltr. container.
2. 20 Ltr. container.
85.00
80.00
Black:
1. 4 Ltr. Container
2. 20 Ltr. container
67.60
61.70
Yellow:
1. 4 Ltr. container
2. 20 Ltr. container
81.00
76.00
5. Road Marking Paint
IS;164/81:
Black
1. 4 Ltr. container
2. 20 Ltr. container
49.00
45.00
20, 23 to 26 (Total 22 items)
Golden Yellow:
1. 4 ltr. container
2. 20 ltr. container
56.00
53.40
White:
1. 4 ltr. container
2. 20 ltr. container
76.00
71.00
6. Ready-mixed paint
brushing red lead nonsetting,
priming
IS:
102/62
1. 4 ltr. container
2. 20 ltr. container
165.00
164.00
7. Ready mixed paint
brushing,
priming,
plaster IS:109/68
1. 4 ltr. container
2. 20 ltr. container
54.50
55.10
8. Ready mixed paint
brushing, gray filler for
enamel for use over
primer IS:110/83.
1. 4 ltr. container
2. 20 ltr. container
49.00
46.00
9. Ready-mixed paint air
drying red-oxide zinc
chrome
priming
IS:2074/92.
1. 4 ltr. container
2. 20 ltr. container
53.00
48.00
10. Ready-mixed paint
brushing wood primer,
pink. IS:3536/66.
1. 4 ltr. container
2. 20 ltr. container
51.50
45.10
11. Ready mixed paint
brushing aluminium redoxide primer IS:5660/70.
1. 4 ltr. container
2. 20 ltr. container.
12. Dry Distemper
emulsion IS:427/68.
oil
59.60
57.40
1. 5 kg. container
2. 20 kg. container
13.
Distemper
emulsion
paint
general
purpose
428/69.
28.50
22.40
oil
for
LS:
1. 5 kg. container
2. 20 kg. container
14.
Cement
IS:5410/92
paint
30.95
25.90
:
1. 5 kg. container
2. 20 kg. container in
drum packing.
23.35
21.90
15.
Plastic
emulsion
paint for interior use
IS:5411/74 (Pt.I)
1. Deep shade 4 ltr.
container.
2. White
4
ltr.
container
92.00
90.00
16. Ready mixed paint,
brushing,
bituminous
black lead free, acid
alkali, heat resistant.
IS:158/81.
1. 4 ltr. container
2. 20 ltr. container.
31.00
28.00
17. Coal Tar Black paint
IS:290/69.
1. 5 kg. container
2. 20 kg. container
27.10
25.30
18.
Bituminous
compound
for
waterproofing
and
cooling
purpose
IS:1580/91.
1. 5 kg. container
2. 20 kg. container.
19. Bituminous, Black,
Lead free, Acid, Alkali
18.70
17.00
water
and
chlorine
resistant IS: 9862/81.
1. 4 ltr. container.
2. 20 ltr. container.
39.20
36.20
20. Ready mixed paint
brushing and finishing
exterior semi-gloss for
general
purpose
IS:117/64.
Golden Yellow :
1. 4 ltr. container
2. 20 ltr. container
61.60
57.50
21. Ready mixed paint,
brushing and finishing
semi-gloss for general
purpose
(red-oxide
)
IS:123/62.
1. 4 ltr. container
2. 20 ltr. container
42.10
39.10
22. Ready mixed paint
air drying semi-gloss for
general
purpose
IS:168/75.
White:
1. 4 ltr. container
2. 20 ltr. container
Black,
Chocolate.
66.00
64.00
Red-oxide,
1. 4 ltr. container
2. 20 ltr. container.
46.00
44.00
Other colour:
1. 4 ltr. container
2. 20 ltr. container
65.00
62.90
23. Ready-mixed paint,
brushing and finishing
interior semi-gloss for
general
purpose
IS:641/64.
1. 4 ltr. container.
2. 20 ltr. container
76.70
73.70
24.
French
IS:348/68
Polish
2. 4 ltr. container
3. 20 ltr. container
44.20
40.00
25. Ready-mixed paint
brushing finishing, semigloss for general purpose
(Black) IS No.128/62.
2. 4 ltr. container
3. 20 ltr. container
43.10
40.80
26. Thinner for synthetic
enamel.
1. 4 ltr. container
2. 20 ltr. container
28.50
25.50
TERMS OF DELIVERY & TAXES :
1.The rates recommended for conclusion of rate contract are ex-factory,inclusive of cost of packing.
Exclusive of Excise duty, Value Added Tax and Entry Tax which may be charge extra as admissible if
any.
2.Minimum time allowed for delivery of goods. The delivery schedule may be mutually decided between
the rate contract holder and the Indenting Officer.
56.
Rate Contract Circular No. 7597 dt.22.10.07, 75 dt.3.1.08
Description of the store
Unit
Rate per
Period of
item
unit
validity
Rs.
PIN INSULATOR:
(11 KV & 33 KV)
Porcelain
Insulator
for
overhead
power
lines
within a nominal voltage,
greater than 1000 Volt
conforming
to
IS
No.731/77 (Pin Insulator)
Per each
1. 11 KV Pin Insulator
05.01.2008(E)
subject
to
validity of EPM
Regn.
Certificate and
VAT clearance
certificate.
58.00
2. 33 KV Pin Insulator
250.00
TERMS OF DELIVERY & TAXES :
Name of the rate contract
holding SSI units
1. Mayur Electro
Ceramics (P) Ltd.,
Pratapgarh, Via.
Rairangpur, Dist.
Mayurbhanj-757050
•
•
•
•
The rates are ex-factory, inclusive of cost of packing and exclusive of VAT and entry tax
which may be charged extra as admissible, if any.
The delivery schedule may be mutually decided between the R/C holder and the
indenting officers.
The rate contract holding firms shall furnish drawing and details of parameters of the
store item at the time of execution of supply order.
The rate contract holding firm shall have to get its product type tested at C.P.R.I. /N.T.H.
at an interval of 2 years.
Rate Contract Circular No. 3405(200)/EPM dt. 06.07.2006,6347 dt.20.08.07
57.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
RAIN COAT:
Waterproof coat with hood
(Rain Coat with hood):Length
at
back
54”
circumference
at
the
bottom 64” and length of
the
sleeves
from
the
middle of the neck 35”
made out of rubberised
double structure water
proof cloth upper layer is
of polyester or mercerised
cloth and lower layer is
thin mercerised cloth with
rubber layer in between
having plain cut two hip
pockets 6½” square with
flap 2½” deep double
standup collar 3½” at the
point in front and 2” in the
middle at the back opening
at the bottom of the back
17” long shoulder reinforced
by
super
impressed piece of the
same
material.
Five
buttons down the front
with double flap on bottom
hole side and two side
loops for belt 2” wide or
suitable length of the same
materials used for the coat
fitted with brass buckles.
The
double
texture
rubberised
cloth
shall
conform
to
the
IS
No.6110/93.
Per each
490.00
21.11.2008
Name of the rate contract
holding SSI units
1. Kalinga Industries,
Jaunliapatti, Cuttack9.(Valid upto
21.11.2008)(Annual
Production Capacity 15000
Pcs.)
2. Vishal Industries, Rovers
Street,Buxibazar, Cuttack1(Valid upto
24.7.2008)(Annual
Production Capacity 9000
Nos.)
3Goenka Enterprise, Town
Hall Road, Ward No.12,
Holding No.336,Cuttack-9
(Valid upto
25.10.2008)(Annual
Production capacity 10000
Pcs.)
4.Usha Udyog & Garments,
Purushottam Complex,
Meria Bazar, Cuttack1(Valid upto
22.7.2008)(Annual
Production capacity
Rs.10,00,000/-)
5.Saswot Industries, Tarani
Vihar, Bidanasi, Cuttack
(Valid upto
8.4.2008)(Annual
Production capacity
Rs.25,00,000/-)
6.Sushree Garments,New
Rausa Patna,Cuttack-1
(Valid upto 21.11.2008)
Hood :- 20” high, 12”
width 11” width at the
beck with button and
button
holed
strap
fastening at the front 4”
from the button.
TERMS OF DELIVERY & TAXES :
•
•
•
The rate is ex-factory, exclusive of value added tax (VAT) and Orissa entry tax which may
be charged extra as admissible, if any.
Minimum time allowed for delivery of goods; i) orders upto Rs.5,000/- … 10 days, ii) for
every subsequent Rs.5000/- … 5 days.
However, the delivery schedule may be mutually decided between the rate contract holder
and the indenting officer.
Rate Contract Circular No. 8133 dt.22.11.2007
58.
Description of the
store item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate
contract holding SSI
units
Per Ltr.
POLYETHYLENE
ROTO
MOULDED
WATER
STORAGE
TANK:
06.07.2006
1. Orissa Plastic
Processing Ltd.,
At. Alupur, O.T.
Road, Balasore756001.
ISI
Marked
Polyethylene Roto Moulded
cylindrical
Vertical
Water Storage Tank
conforming
to
IS
No.12701/96.
Capacity:
a. 200 Ltrs.
2.87
b.
500 Ltrs.
2.86
c.
1000 Ltrs.
2.64
TERMS OF DELIVERY & TAXES :
Rate Contract Circular No. 3643 dt. 07.07.2005
59.
Description of the store
item
Unit
Rate per
unit
Period of
validity
Name of the rate contract
holding SSI units
Rs.
P.S.C. POLES
a) 7.5 mtr. Long PSC
Pole working load
140 kg. At 600 mm
from the top with
depth of planting
1500mm
with
earthing
arrangements
conforming
to
IS
No.1678/78 as per
OSEB drawing No.
5817, IS No. 1343/60.
Per each
b) 7.5 mtr. Long PSC
Pole
working
load
200 kg. At 600 mm
from the top with
depth
of
planting
1500mm
with
earthing
arrangements
conforming
to
IS
No.1678/78 as per
OSEB Drawing No.
5818 & IS
No.1343/60.
a) 8 mtrs. Long PSC Pole
working load
200 kg. At 600 mm
from the top with
depth
of
planting
1500mm
with
earthing
arrangements
conforming
to
IS
No.1678/78 as per
OSEB Drawing No. 4.
924.00
1094.00
1209.00
07.02.2008(E)
1. Neelachal Concrete
Products (P) Ltd.,
Bampada, P.O.
Chhanpur, Dist.
Balasore-756056
2. Konark Construction
& Engineers Ltd.,
Telengapentha,
Cuttack-51
3. O.C.P.India (P) Ltd.,
Rasulgarh,
Bhubaneswar
4. R. N. Mishra, At/P.O.
Choudhury Bazar,
Cuttack.
5. Orissa Concrete
Industries, At/P.O.
Jatni, Dist. Khurda.
6. Lite Manufacturing
Pvt. Ltd., Goods Shed
Road, Khajuria Road,
Berhampur, Ganjam
7. Balaji PSCC Poles
Industries, 14/370,
Gajapati Nagar, P.O.
Sainik School, BBSR
8. K.D.B.Udyog,
Patharla,
Govindapur,
Bargarh(only 8 mtrs.
Long PSC Pole)
TERMS OF DELIVERY & TAXES :
•
The rates are ex-factory, exclusive of excise duty, VAT and entry tax which may be
charged extra as admissible, if any.
• Time allowed for delivery of goods:
a) Orders upto 500 Poles in 45 days but not before 30 days from the date of receipt
of the order.
• However the delivery schedule may be mutually decided between the rate contract
holder and the indenting officer.
Rate Contract Circular No. 3990 dt. 08.08.2006, No.4396 dt. 05.09.2006,5663 dt.4.11.06,842
dt.5.2.07,5699 dt.21.7.07
60.
Description of the store
item
SOFT PARAFFIN, I.P.
(WHITE)
3. 1 Kg. in Polyjar
Pack.
4. 15 Kg. in Polyjar
Pack
Unit
Rate per
unit
Rs.
Per Kg.
90.00
Period of
validity
25.02.2008
1253.00
Name of the rate contract
holding SSI units
•
•
Chemie (India), I.E.,
Cuttack-10.
Surgiplast (India),
Berhampur.(Upto
30.06.2007)
TERMS OF DELIVERY & TAXES :
1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax which may be
charged extra as admissible if any.
2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations
charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of
one year from the date of issue of rate contract.
3.The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
Rate Contract Circular No. 1478 dt.26.2.200
61.
Description of the store
item
Unit
Rate per
unit
Rs.
6.00
Period of
validity
Name of the rate contract
holding SSI units
Stamp Pad Ink
M/s. B.K.Products, S.E.-12,
Per 30ml.
27.11.2008
Stamp Pad Ink, violet
I.E., Cuttack-10
bottle
(Subject to the
validity of EP&M (Annual Production Capacity
colour, Grade-A 30 ml. net
Regn. Certificate – Rs.3,00,000/-)
packed in plastic container
& VAT Clearance
with stopper conforming to
Certificate)
IS:No.393/85
TERMS OF DELIVERY & TAXES :
1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax and Orissa
Entry Tax which may be charged extra as admissible if any.
2.The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
Rate Contract Circular No. 612 dt.22.1.08
62.
Description of the store
item
Unit
Rate per
unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
STEEL CHAIR
As per list below.
SPECIFICATION FOR
STEEL CHAIR:
Steel Chair made out of
steel
square
Tube,
consisting of seat and back
plastic woven seasoned
non-teak,
non-sal,
hardwood
such
as
Dhaura, Asan, Kangra,
Chakunda,
Kasi
and
Tentra frame and hand
rest made of the same
wood.
Per each
541.00
17.03.2009
subject
to
validity of EPM
Regn.
Certificate and
VAT Clearance
Certificate
SPECIFICATION :
1. Frame:
25x25x
1.25mm square tube.
2. Seat Size : 450 mm x
450 mm seasoned nonteak, non-sal, hardwood
such as Dhaura, Kangra,
Chakunda,
Kasi
and
Tentra frame with plastic
woven cane.
3.
Seat
height:
from
ground level – 450 mm.
4. Hand rest : Made out
from non-teak, non-sal,
hard-wood
such
as
Dhaura, Asan, Kangra,
Chakunda and
Kasi
height from top of seat to
top of hand rest – 235 mm.
5.
Back
inclined
backwards 5º to 10º from
the vertical height having
size of 450mm x 250 mm.
TERMS OF DELIVERY & TAXES :
•
The rate is ex-factory, exclusive of VAT and entry tax which may be charged extra, as
admissible, if any.
The minimum time allowed for delivery of goods and the delivery schedule may be mutually
decided between the rate contract holder and the indenting officer.
Rate Contract Circular No. 2098, dt.18.3.2008,2551 dt.4.4.2008
NAME OF R/C HOLDERS :
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
Konark Industries, SE II,I.E.,Madhupatna, Cuttack(Production capacity as per DIC – 2.00
crores)
A.H.Industries, Nayachouk,Madhupatna,Cuttack-10
Padma Auto Body Builders,Plot No.144 A, Zone-C, New I.E.,Jagatpur, Cuttack
Kalinga Equipments, New I.E.,Mancheswar,S-1/110 & 107,BBSR
Sanjeeb Enterprisers,Jagannath Road, I.E.,Cuttack-10(Production capacity as per DIC –
Rs.10,00,000/-)
Rollex Enterprisers,Type-II,I.E.,Cuttack-10
Ranjita Steelex Industry, A1, A2, I.E.,Bhubaneswar
Krishna Steel Industries, M.G.Road, Jeypore, Koraput(Production capacity as per DIC –1.5
M.T.)
Steelex Industries, A.B.Road, Neemasahi,Cuttack
Maa Metal Industries, Ganesh Bazar, Main Road, Phulbani(Production capacity as per DIC –
Rs.6,04,000/-)
Rinki Steel Industries, At-Kasaipada, P.O.-Rajendra College, Bolangir(Production capacity as
per DIC – 30 MT)
Vasavi Steels, Bhapur Bazar, Berhampur, Ganjam(Production capacity as per DIC –600 nos.)
Konark Enterprises, A-40,I.E.,Cuttack-10
Classic Metal Products, I.E.,Cuttack-10(Production capacity as per DIC – Rs.60,00,000/-)
Krishna Industries, Nayachouk,Madhupatna,Cuttack
Unique Enterprises, Netajinagar,Khannagar,Cuttack-10
Shree Krishna Steel Inds., Plot No.372,Sastrinagar,Bhubaneswar(Production capacity as per
DIC – 108 MT)
Ashirbad Industries,Darkhapatna,Kalayaninagar,Cuttack(Valid upto 19.10.2008)
M.N.Engg., Plot No.71, Fishery Lane, Chintamaniswar,Bhubaneswar(Production capacity as
per DIC – 36 MT)(Valid upto 6.6.2008)
Dev Steel Industry, 4/330,Raghunathpur,P.O. Samantarapur, Nuagaon Chhaka, BBSR
( Production capacity as per DIC – 8 lakhs)
Kiran Enterprises, At-Gopalgaon, Chunavati-Lane,Balasore ( Production capacity as per DIC
– 3 lakhs)
Kanika Furniture (P) Ltd., At-N.H.-5, Bampada, P.O.-Chhanapur, Kuruda, Balasore
(Production capacity as per DIC – 37 M.T.)
Green Gospeller,Plot No.136,Sector-A,Zone-A,I.E.,Mancheswar,Bhubaneswar
Raja Steel Industries, At-Ranipeta,Paralakhemundi,Gajapati
Jagannath Industries, Station Road, Baripada, Mayurbhanj( Production capacity as per DIC –
19.62 MT)
Devi Engineering enterprises, Mining Square, Keonjhar (Production capacity as per DIC –300
M.T.)
Meera Industries, Hemsurpara, Angul (Production capacity as per DIC – 600 Nos.)
Ashutosh Industries, Plot No.211,Mancheswar I.E.,Bhubaneswar ( Production capacity as per
DIC – 1,30 crores)
Steel Tek,At-Hatatota Road, Talcher,Angul ( Production capacity as per DIC – 30 lakhs)
Ashirwar Engineering & Electricals, I.E.,Cuttack-10
Aroni Steel Industries, At/P.O.-Khariar,Nuapada ( Production capacity as per DIC – 1000
nos)
Delux Steel Industries, Plot No.738, Jail Road, Jharpada, Bhubaneswar (Production capacity
as per DIC – 42 nos.)
Narayani Welding Workshop, Gosani Nuagaon, Berhampur (Production capacity as per DIC –
44 M.T.)
Ashoka Engineering Works, 2nd Chandra Prava street,Berhampur
35.
36.
37.
38.
63.
Leo Engineers(P)Ltd.,93/B.,New I.E.,Phase-II,Jagatpur,Cuttack(Valid upto 24.6.2008)
Umi Industries, Plot No.4741, Badagada, Bhubaneswar (Production capacity as per DIC –12
M.T.)(Valid upto 5.5.2008)
Radha Mohan Ray, Agricultural Equipments,I.E.,Cuttack-10(Valid upto 7.5.2008)
Priya Steel Industries, Plot No.228,Rasulgarh,Bhubaneswar(Valid upto 5.2.2009)
Description of the store
item
STEEL DOOR & WINDOW
FRAME
1. Steel angle iron door
frame as per the drawing
No.379/84
of
B.D.A.,
BBSR Steel Angle Iron
frame
shall
be
manufactured
from
standard rolled steel angle
section
of
40mmx40mmx6mm
size
with corners of the frame
duly
metered
and
electrically welded with
fish tail hold fasts made
out of M.S. flat size
200mm x 50mm x 30mm
wide and 5mm thick
welded to the frame at the
rate of 6 nos. per frame
with 10mm dia M.S. round
bar to be welded at the
bottom at the bay with
M.S. Hinges of size 10mm
14SWG thick at the rate of
3 nos. and 50mm size one
no. for single leaf shutter
aldrop staple and tower
bolt hinges duly welded to
the frame with one coat of
anti-corrosive
red-oxide
zinc chrome primer.
2. Steel Angle iron window
frame with MS Rod Flat
grating as per drawing
No.379/84 of BDA, BBSR.
Steel angle iron window
frame with M.S. rod flat
grating manufactured from
standard rolled steel angle
section 40mm x 40mm x
6mm with corners of the
frame duly metered and
Unit
Rate per unit
Rs.
Per Kg.
40.00
38.00
Period of
validity
14.03.2009
subject
to
validity
of
EP&M
Regn.
certificate.
Name of the rate contract
holding SSI units
1. Agarwalla Fabricators,
At/P.O. Attabira, Dist.
Bargarh768027(Production
capacity-18MT).
2. Nanda Enterprises,
Contractor Colony,
Burla, Sambalpur
(Production capacity 18
MT)
3. Nanda Industries,
Contractor Colony,
Burla, Sambalpur (
Production capacity 10
MT)
4. Kaling Industries, 11/2,
I.E., Baraipali,
Sambalpur
5. Murarka Industry,
Khetrarajpur,
Sambalpur ( Production
Capacity 12 MT)
6. Meera Fabrication, Near
Nehrugali, Padmapur,
Rajberasambar,
Bargarh
7. Tarini Enterprisers,
At/P.O. Gopalpur,
Cuttack (Production
Capacity Rs.5,00,000/-)
electrically welded with
fish tail hold fasts made
out of MS flat of size
200mm x 50mm x 30mm
wide and thick at the rate
of 4 nos. per frame with
MS hinges of size 75mm
and 14 SWG thick at the
rate of 3 nos. for each
single leaf shutter tower
bolt ring and steel grating
made of MS rod 16mm dia
supported
with
19mmx5mm
MS
flat
properly welded to the
window frame with one
coat of anti-corrosive red
oxide zinc chrome primer.
3. Steel angle iron window
frame with MS grill as per
drawing
No.379/84
of
BDA, BBSR. Steel angle
iron window frame MS grill
manufactured
from
standard rolled steel angle
section 40mm x 40 mm x
6mm corner of the same
duly
metered
and
electrically welded with
fish tail hold flats made
out of MS flat of size
200mm x 50mm x 30mm
wide and 5mm thick at the
rate of 4 nos. per frame
with MS hinges of sizes
75mm and 14 SWG thick
at the rate of 3 nos. for
each single leaf shutter
tower bolt, ring and MS
grills made out of 19mmx
5mm flats properly welded
to window frame with one
coat of anti-corrosive red
oxide zinc chrome primer.
38.00
TERMS OF DELIVERY & TAXES :
1. The rate are ex-factory and exclusive of VAT and Orissa entry tax which may be charged extra, as
legally admissible, if any.
2. The delivery schedule may be mutually decided between the rate contract holders and the indenting
officer.
64.
Rate Contract Circular No. 2026 dt. 15.03.2008
Description of the store
Unit
Rate per unit
item
Rs.
STEEL
SHELVING
CABINET:
Per each
A) Steel shelving cabinet
made out of 1mm C.R.
Sheet
with
adjustable
shelves door handles, six
lever locks with 3 way
bolting system, one coat of
primer and 2 coats of
enamel paints conforming
to IS No.3312/84 without
stove enameling of the
components.
Size :
1. 78”x36”19”
2. 52”x30”x17”
Period of
validity
Name of the rate contract
holding SSI units
19.05.2008(Ext
enstion
vide
circular
No.8519
dt.11.12.07)
5453.00
3402.00
TERMS OF DELIVERY & TAXES :
The rates are ex-factory and exclusive of Value Added Tax & Entry Tax which may be charged extra as
admissible if any.
Terms of Delivery:-The minimum time allowed for delivery of goods and the delivery schedule may be
mutually decided between the rate contract holder and the Indenting Officer.
Rate Contract Circular No. 6008 dt.20.11.06, 6682 dt.18.12.2006,423 dt.12.1.07,949 dt.8.2.07,2050
dt.16.3.07,3142 dt.17.5.07,3989 dt.21.6.07, 6000 dt.4.8.07, 7177
dt.29.9.07,
8519
dt,11.12.07,
8786
dt.22.12.07,1086
dt.07.02.2008
NAME OF THE R/C HOLDING UNITS:
1.Konark Industries,SE-11,I.E.,Madhupatna, Cuttack-10(Upto 19.5.2008)
2.Ashoka Engineering, Chandraprava Street, Berhampur(Upto 19.5.2008)
3.Shakti Enterprisers, I.E.,Berhampur(Upto 19.5.2008)
4.Meera Industries, Hamsurpada, Angul(Upto 19.5.2008)
5.Mealonie Colour Chamber,Infront of Viswambar Vidyapitha, Puri(Upto 19.5.2008)
6.Krishna steel Industries,M.G.Road,Jeypore(Upto 19.5.2008)
7.Grand Fabricators,Plot No.2894,Jhaunbania,Lewis Road,BBSR(Upto 19.5.2008)
8.Rinki Steel Industries,At-Kasaipada,P.O.-Rajendra College,Bolangir(Upto 19.5.2008)
9.Shakti Engg. & Steel,at/P.O.-Korian,Dist:Dhenkanal(Upto 19.5.2008)
10.Shree Jagannath Steel Industries,At-Bisinagar,Chhatrabazar,Canal Road,P.O.-College (Upto
19.5.2008)
11.Choudhury Fabrication Works,At/P.O.-Bamra,Sambalpur(Upto 19.5.2008)
12.Jagannath Industries,Station Road,Baripada(Upto 19.5.2008)
13.Laxmi Metal Industry,D.F.O.Chouk,Main Road,Phulbani(Upto 19.5.2008)
14.Shree Krushna Steels Industries,Plot No.372,Shastrinagar,Unit-IV,BBSR(Upto 19.5.2008)
15.Deluxe steel Industries,Plot No.738,Jail Road, Jharpada,BBSR(Upto 19.5.2008)
16.Basanti Industries, At/P.O.-Khannagar,Cuttack(Upto 19.5.2008)
17.Narayani Welding workshop,Gosaninuagoan,Berhampur(Upto 19.5.2008)
18.Dev Steel Industries,4/330,Raghunathpur,P.O.-Samantarapur,Nuagaon Chhak,BBSR(Upto
19.5.2008)
19.Steel Tek,At/Ratatota Road,Angul(Upto 19.5.2008)
20.Subhashree Steel Industries,Plot No.4756/6092,VSS Nagar,BBSR(Upto 19.5.2008)
21.Pravat Steel Industries,At/P.O.-Kankadapal, Dist:Dhenkanal(Upto 19.5.2008)
22.Devi Engg. Enterprises, At-Mining Sqr., Keonjhar(Upto 19.5.2008)
23.Green gospeller, Plot No.136,Sec-a,zone-A,I.E.,Mancheswar,BBSR(Upto 19.5.2008)
24.Vasavi Steels,Bhapur Bazar,Khajastreet,Berhampur(Upto 19.5.2008)
25.Steelex Industries,A.B.Road,Neemasahi,Cuttack(Upto 19.5.2008)
26.Classic Metal Products,Jagannath Road,I.E.,Madhupatna,Cuttack-10(Upto 19.5.2008)
27.Rollex Enterprisers,Type-II-12,I.E.,CTC-10(Upto 19.5.2008)
28.Padma Auto Body Builders,Plot No.144-A,Zone-C,New I.E.,Jagatpur,CTC(Upto 19.5.2008)
29.Labanya Industries,At/P.O.-Khalari,Angul(Upto 19.5.2008)
30.Krishna Industries,Nayachouk,Madhupatna,CTC-10(Upto 19.5.2008)
31.Orissa Steel & Wire Products(P)Ltd.,B-14,I.E.,CTC-10(Upto 19.5.2008)
32.A.H.Industries,Nayachouk,Madhupatna,CTC-10(Upto 19.5.2008)
33.Kartik enterprisers(P)Ltd.,I.E.,CTC-10(Upto 19.5.2008)
34.Metalex Industries,C-4,I.E.,CTC-10(Upto 19.5.2008)
35.Priya Steel Industries,Plot No.228,Rasulgarh,BBSR(Upto 19.5.2008)
36.Ashirbad Industries,Darkhapatna,Kalyaninagar,CTC(Upto 19.5.2008)
37.CEF Engineering,Plot No.17,Rasulgarh,BBSR(Upto 19.5.2008)
38.Sana iron & Steel Industries,Main Road,Malkanagiri(Upto 19.5.2008)
39.Swastik Engg. Works,At/P.O.-Ujalpur,sundergarh(Upto 19.5.2008)
40.Ranjita Steelex Industry,A1/42,I.E.,BBSR(Upto 19.5.2008)
41.Kiran enterprisers,Gopalgaon,Chunavati lane,Balasore(Upto 19.5.2008)
42.Tarini enterprisers,At/P.O.-Gopalpur,CTC(Upto 30.3.2008)
43.Sheo Industries,C-8,I.E.,CTC-10(Upto 19.5.2008)
44.Sanjeeb Enterprisers,Jagannath Road,Mahdupatna,CTC-10(Upto 19.5.2008)
45.Xenium & Xenium,Uditnagar,Rourkela,sundergarh(Upto 19.5.2008)
46.Sonax Industries,At-Kajidiha,Khapuria,CTC-10(Upto 19.5.2008)
47.Konark Enterprises,A/40,I.E.,CTC-10(Upto 19.5.2008)
48.Sreema Steel Furniture Works,I.E.,sunabeda(Upto 19.5.2008)
49.Kalinga Equipments,S-1/110-107,New I.E.,Mancheswar,BBSR(Upto 19.5.2008)
50.Prince Steel Industry,Plot No.179/A,Zone-B,Mancheswar I.E.,BBSR(Upto 19.5.2008)
51. Umi Industries,Plot No.4741,Badagada,BBSR(Upto 5.5.2008)
52. Maa Metal Industries,Ganesh bazaar,Main road,Phulbani(Upto 19.5.2008)
53.Sri Ram Industries,A-4,I.E.,Rasulgarh,BBSR(Upto 19.5.2008)
54. Durga Steel,At/P.O.-Banarpal,Angul(Upto 19.5.2008)
55. Unique Enterprises,At/P.O.-Netajinagar,Khananagar,CTC(Upto dt.05.02.08)
56.Ashutosh Steel Industries,Chandrasekharnagar,Bolangir(Upto 29.3.08)
57.M.N.Engineering,Plot No.71,Fishery Lane,Chintamaniswar,BBSR(Upto 19.5.2008)
58.Sri Aurobindo Fabrication,At/Hasinpur,P.O.-Ganiganja,Via-Barapada,Bhadrak(Upto 19.5.2008)
59.Ashutosh Industries, Plot No.56,Sector-A,Zone-D,Mancheswar,I.E.,BBSR (Upto 19.5.2008)
60.Vijay steel Industries, M.G.Road, Jeypore(Upto 19.5.2008)
61.Maa Tankapani Engineering Works, Tankapani Road, Badagada, Plot No.4241, Bhubaneswar (Upto
19.5.2008)
62.Thakur Enterprises,Junuspatra College Square, Cuttack(Upto 19.5.2008)
63Shri Manasa Steel Industries, R.K.Nagar, Rayagada (Valid upto 19.5.08)
64. Hesper Industry,Plot No.916/6431,Palasuni,Rasulgarh,BBSR(Valid upto 19.5.08)
65.Raja Steel Industries, Ranipeta,Paralakhemundi,Gajapati(Valid upto 19.5.08)
66.Uma Steels, Aska Road, Near Gate Bazar, Berhampur(Valid upto 19.5.08)
67.Bhagyalaxmi Steel Furniture Works, At-Canal Street, Ist Military Lane, Gate Bazar, Berhampur(Valid
upto 19.5.08)
68.Kalinga Industries, 11/2, Baraipali,Sambalpur(Valid upto 19.5.08)
69.Sahu Steel Industries, At-Junadihi, Sambalpur Road, Bolangir(Valid upto 19.5.08)
70. Leo Engineers (P) Ltd., New I.E., Jagatpur, Cuttack(Valid upto 19.5.08)
71. Shah Industries,I.E.,Baraipali,Sambalpur(Valid upto 19.5.08)
72.Sahoo Fabrication,At/P.O.-Bamra,Sambalpur(Valid upto 19.5.08)
73.Swasti Furniture Industries,Plot No.72/D,Sector-A,Zone-D,I.E.,Mancheswar,BBSR(Valid upto 3.3.08)
74. Sahoo Engineering Works, At-Haridabadi,P.O.-Daspali,Dist:Nayagarh-84(Upto 12.4.08)
75.Ashutosh Steel Inds., Chandrasekhar Nagar, Bolangir(Upto 21.3.08)
76. Monashis Steel & Agriculture Industries, At-Bhatli road, Ward No.7,Baragarh(Upto 21.3.08)
77.Radha Mohan Ray Agricultural Equipments,At-C-16,I.E.,Kajidiha Madhupatna,Cuttack(Upto
7.5.2008)
78.Mohalaxmi Steel Inds., Durgabazar, Jagatsinghpur(Upto 19.5.2008)
79.Shivasakti Industries, Gulipatra, Umerkote, Nabarangpur(Upto 19.5.2008)
80.Allied Industries, B-1, I.E., Cuttack-10(Upto 19.5.2008)
65.
Description of the store
item
STEEL TRUSS ANGULAR
& PURLINS
Unit
Rate per
MT
(A) Angular Steel Truss
Revetted
welded
type
including bottom runner
ties made out of M.S.Angle
but excluding purlins.
Size-75x75x6 mm
55x65x6 mm
50x50x6 mm
(B)Purlins made
M.S.Angles
out
Rate per unit
Rs.
34,090.00
Period of
validity
14.03.2009
(Subject
to
validity
of
EP&M
regn.
Certificate
&
VAT Clearance
Certificate)
Name of the rate contract
holding SSI units
See table below
of
31,312.00
(C)Purlins made out of
M.S.Channels
31,483.00
TERMS OF DELIVERY & TAXES :
1.The rates are ex-factory, exclusive of VAT and Orissa entry tax which may be charged extra as
admissible, if any.
2.The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided
between the indenting officer and the contractor.
Rate Contract Circular No. 2034 dt.15.03.2008
NAME OF THE UNITS HOLDING R/C.
1.Shiva Sankar Engg. Works & Traders, Nilakantheswar Mandir Road, At/P.O.- Jeypore,
Koraput(Production Capacity 120 MT)
2.General Fabrication & engineering Works, At/P.O.- Semiliguda,Koraput(Production capacity 60 MT)
3.Nanda Industries, Contractor Colony, P.O. Burla, Sambalpur (Production capacity Rs.20,00,000/-)
4.Choudhury Fabriocation Works, at/P.O. Bamra, Sambalpur(Production capacity 20MT)
66.
5.Kalinga Industries, Baraipali, Sambalpur
6.Neeltara Fabrication Unit, M.G. Road, Jeypore, Koraput.(Production capacity 60 MT)
7. Mina Fabrication & Welding Works, Mian Road, Umerkote, Dist.Nabarangpur.
8.Agarwalla Fabricators, At/P.O. Attabira, Bargarh.(Production capacity 12 MT)
9.Sreema Steel Furniture Works, I.E.,Sunabeda, Koraput
10.Indravati Engineering Works, ITI Road, Bhawanipatna, Kalahandi
11.Nanda Enterprises, Contractor colony, Burla, Sambalpur(Production capacity Rs.10,00,000/-)
12Shri Laxmi Industries, Kakigaon Road, Semiliguda, Koraput.(Production capacity 143 MT)
13.Sahoo Fabrication,At/P.O.-Bamra,Stationbasti,Sambalpur(Production capacity 100MT)(valid upto
08.04.2008)
14.A.K.Steel Industries, At/P.O.Rangamatiguda, Dist. Nabarangpur.(Production capacity 60 MT) (valid
upto 15.09.2008)
15.Hindustan Engg. & Fabrication Industries, NKT Road, Jeypore, Koraput.(Production capacity 180
MT)(valid upto 31.03.2008)
Description of the store
Unit
Rate per unit Period of
Name of the rate contract
item
Rs.
validity
holding SSI units
STEEL WINDOW:
Steel Window (Fixed type)
with fixture-without glass
confor-ming
to
IS:No.
1038/83
Rate per
Kg.
44.80
Steel Window (Openable)
type
with-out
fixture
fittings
and
glasses
conforming to IS:1038/83
47.80
26.03.2009
(Subject
to
validity
of
EP&M
Regn
certificate and
VAT clearance
certificate.
1. Nanda Enterprises,
Contractor Colony, P.O.Burla, Sambalpur
2. Aggrwala Fabricators,
At5/P.O.- Attabira,
Baragarh
TERMS OF DELIVERY & TAXES :
•
•
The rates are ex-factory, exclusive of VAT and Orissa entry tax which may be charged
extra, as admissible, if any.
Minimum time allowed for delivery of goods and the delivery schedule may be mutually
decided between the rate contract holder and the indenting officer.
Rate Contract Circular No. 2263 dt.27.03.2008
67.
Description of the store
item
SUBMERSIBLE PUMP:
Unit
Rate per unit
Rs.
Submersible Pump with
squirrel cage induction
type, submersible electric
motor to run on 3 phase
line voltage ranging from
320V to 450V conforming
to
IS:8034/89
with
following specification:
Sl.
Model
H.P.
Period of
validity
Name of the rate contract
holding SSI units
25.12.2007(E)
St
Outlet
Head range
1. M/s. Anupama
Industries, Plot No.738,
Rasulgarh,
Bhubaneswar-10
Discharge
Rate per
No.
1
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
2
3
D6L 54/4
D6L 45/8
D6L 63/8
D6l 72/4
D6L 72/5
D6L 54/10
D6L 72/10
D6L 81/7
D8L 504/2
D8L 603/2
D8L 702/6
D6H 09/7
D6H 27/5
D6H 9/5
D6H 9/3
D6L 45/6
6
10
13
8
11
14
21
20
10-5
12-5
42
3 HP
5 HP
2 HP
1 Single
7.5
ag
e
(size
mm)
mtr.
L.P.M.
each
Ex-factory
4
5
6
7
8
4
8
8
4
5
10
10
7
2
2
6
7
5
5
3
6
75
75
75
75
75
75
75
75
125
125
125
50
50
32
25
80
20
33
45
24
30
48
60
36
24
25
45
47
38
30
20
25
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
36
73
70
38
48
93
94
63
43
46
96
76
59
54
35
55
400 to 700
300 to 600
500 to 800
500 to 950
500 to 950
400 to 700
500 to 950
700 to 1300
500 to 1100
600 to 1300
1000 to 2800
170 to 67
320 to 100
155 to 110
145 to 110
600 to 300
20,789.00
25,512.00
35,571.00
20,818.00
24,037.00
34,630.00
36,057.00
28,042.00
25,249.00
31,503.00
50,871.00
17,472.00
18,036.00
12,193.00
12,809.00
22,646.00
TERMS OF DELIVERY & TAXES :
1) The rates are ex-factory and exclusive of VAT and entry tax which may be charged extra,
as admissible, if any.
2) The impeller used in submersible pump should be made of bronze/ stainless materials.
3) The manufacturer shall furnish guarantee and after sales service including replacement
at free of cost for 15 (fifteen) months from the date of supply or 12 (twelve) months from
the date of installation.
4) The indenting officer will pay the testing charges extra on production of test certificate
along with money receipt towards payment of testing fees for each pump set tested, if
the indenting officer orders for testing of pump set by any testing agencies/ laboratories.
5) The delivery schedule will be mutually decided by the indentor and the supplier.
Rate Contract Circular No. 6752 dt. 26.12.2005,942 dt.8.2.07, 5477 dt.10.7.07
68.
Description of the store
item
SURGICAL DRESSING
Unit
Rate per unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
Surgical Dressings:
(Gauze & Bandage)
Handloom cotton bandage
cloth,
bleached
nonsterilised woven in plain
weave with 20s count yarn
in warp way and 20s count
yarn in weft way with well
Sqr.
Mtr.
9.95
29.02.2008
1.Maa Durga Handloom
Industries, Tirigia.
2.Biraja Surgical Industries,
Nuagarh, Telengapentha,
Cuttack-51.
3.Singhanath handloom,
Gopinathpur, Baramba,
formed selvage, ends 150
threads/dm. min. and pick
85 thread/dm. min. mass57± 5g/m2 conforming to
IS: 863/ 1988. Than size –
16.5 mtrs x 90 cm.
Cuttack
4.Mama Surgicals,
Nuapatna, Cuttack.
5. Shyamakali Weaving
Factory,
Baramba,Gopinathpur,
Cuttack.
6. Indian Handlooms,
Champeidwar, Ragadipada,
Cuttack
7.Durga Madhab Village
Handloom Industries, At.
Dandasahi, P.O. Rajranpur,
Dist. Nayagarh
8.Bijoy Surgicals &
Chemicals, Jagatpur,
Cuttack
9. Chemie (India), Cuttack10.Shivasakti Surgicals,
Tigiria, Cuttack.
11. Smart Surgicals, At.
Gopinathpur, P.O.
Singhanath Pitha, Via.
Badamba, Dist. Cuttack.
12.Surgiplast India, Station
Road, Berhampur.
13.Satyabadi Gauge and
Bandage, Nuapatna, Tigiria,
Cuttack
14.Gayatri Bandage, Jajpur
15.Debashisa Gauge &
Bandage Enterprises,
Dhenkanal
16.Lakshmipati Bandage &
Gauze, Gajapati.
17.JBS Products, I.E., Old
Jagannath Road,
Madhupatna, Cuttack10(upto 31.12.07)
18.Biraja Surgical
Industries, Padmanav
Nagar, Brahmanigram,
Cuttack
19. Bijoy Surgicals &
Chemicals, Plot No.120,
Phase-II, New I.E., Jagatpur,
Cuttack-21 (Upto 31.12.07)
20.Subham Handloom &
Surgicals, At/P.O.Nuapatna, P.S.-Tigiria,
Cuttack-35
21.Subham Medicare, Plot
No.82, Patrapada, BBSR
22.Das & Sons Gauze &
Bandage, At/P.O.Nuapatana, Block-Tigiria,
Dist:Cuttack-754035
Handloom Cotton gauge,
bleached, absorbent, nonsterilized, woven in plain
weave with 26s count
yarns,
ends
75
threads/dm. min. and
picks 55 threads/dm.
min. Mass 30 ± 5 g/m2
conforming
to
IS
:
758/88. Than Size : 16.5
mtrs. x 60 cm.
5.64
1.Maa Durga Handloom
Industries, Tirigia.
2.Biraja Surgical Industries,
Nuagarh, Telengapentha,
Cuttack-51.
3.Singhanath handloom,
Gopinathpur, Baramba,
Cuttack
4.Mama Surgicals,
Nuapatna, Cuttack.
5. Shyamakali Weaving
Factory,
Baramba,Gopinathpur,
Cuttack.
6. Indian Handlooms,
Champeidwar, Ragadipada,
Cuttack
7.Durga Madhab Village
Handloom Industries, At.
Dandasahi, P.O. Rajranpur,
Dist. Nayagarh
8.Bijoy Surgicals &
Chemicals, Jagatpur,
Cuttack
9. Chemie (India), Cuttack10.Shivasakti Surgicals,
Tigiria, Cuttack.
11. Smart Surgicals, At.
Gopinathpur, P.O.
Singhanath Pitha, Via.
Badamba, Dist. Cuttack.
12.Surgiplast India, Station
Road, Berhampur.
13.Satyabadi Gauge and
Bandage, Nuapatna, Tigiria,
Cuttack
14.Gayatri Bandage, Jajpur
15.Debashisa Gauge &
Bandage Enterprises,
Dhenkanal
16.Lakshmipati Bandage &
Gauze, Gajapati.
17.JBS Products, I.E., Old
Jagannath Road,
Madhupatna, Cuttack10(upto 31.12.07)
18.Biraja Surgical
Industries, Padmanav
Nagar, Brahmanigram,
Cuttack
19.Bijoy Surgicals &
Chemicals, Plot No.120,
Phase-II, New I.E., Jagatpur,
Cuttack-21 (Upto 31.12.07)
20.Subham Handloom &
Surgicals, At/P.O.Nuapatna, P.S.-Tigiria,
Cuttack-35
21.M/s. Subham Medicare,
Plot No.82, Patrapada, BBSR
22. Das & Sons Gauze &
Bandage, At/P.O.Nuapatana, Block-Tigiria,
Dist:Cuttack-754035
Handloom cotton cloth for
plaster of paris bandage
variety-I, bleached, woven
in plain weave with 30s
count yearn ends 130
threads/dm. min. and
picks 75 threads/dm,.
min.
Mass
40
g/m2
conforming
to
IS
6237/71. Than Size : 16.5
mtrs. x 90 cm.
Handloom
cotton
gauge
7.96
1.Maa Durga Handloom
Industries, Tirigia.
2.Biraja Surgical Industries,
Nuagarh, Telengapentha,
Cuttack-51.
3.Singhanath handloom,
Gopinathpur, Baramba,
Cuttack
4.Mama Surgicals,
Nuapatna, Cuttack.
5.Chemie (India), Cuttack-10
6.Smart Surgicals, At.
Gopinathpur, P.O.
Singhanath Pitha, Via.
Badamba, Dist. Cuttack.
7.Surgiplast India, Station
Road, Berhampur.
8.JBS Products, I.E., Old
Jagannath Road,
Madhupatna, Cuttack10(upto 31.12.07)
9.Biraja Surgical Industries,
Padmanav Nagar,
Brahmanigram, Cuttack
10. Bijoy Surgicals &
Chemicals, Plot No.120,
Phase-II, New I.E., Jagatpur,
Cuttack-21 (Upto 31.12.07)
11. Subham Handloom &
Surgicals, At/P.O.Nuapatna, P.S.-Tigiria,
Cuttack-35
roll bleached absorbent
non-sterilised, woven in
plain weave with 26s
count yarns, ends 75
threads/dm. min. and
picks 55 threads/dm.
min. Mass : 30 ± 5 g/m2
conforming to IS:758/88
Roll size : 3.0 mtr. x 60
cm.
Handloom cotton bandage
5.80
1.Maa Durga Handloom
Industries, Tirigia.
2.Biraja Surgical Industries,
Nuagarh, Telengapentha,
Cuttack-51.
3.Singhanath handloom,
Gopinathpur, Baramba,
Cuttack
4.Mama Surgicals,
Nuapatna, Cuttack.
5. Shyamakali Weaving
Factory,
Baramba,Gopinathpur,
Cuttack.
6. Indian Handlooms,
Champeidwar, Ragadipada,
Cuttack
7.Durga Madhab Village
Handloom Industries, At.
Dandasahi, P.O. Rajranpur,
Dist. Nayagarh
8.Bijoy Surgicals &
Chemicals, Jagatpur,
Cuttack
9. Chemie (India), Cuttack10.Shivasakti Surgicals,
Tigiria, Cuttack.
11. Smart Surgicals, At.
Gopinathpur, P.O.
Singhanath Pitha, Via.
Badamba, Dist. Cuttack.
12.Surgiplast India, Station
Road, Berhampur.
13.Satyabadi Gauge and
Bandage, Nuapatna, Tigiria,
Cuttack
14.Debashisa Gauge &
Bandage Enterprises,
Dhenkanal
15.Lakshmipati Bandage &
Gauze, Gajapati.
16.JBS Products, I.E., Old
Jagannath Road,
Madhupatna, Cuttack10(upto 31.12.07)
17.Biraja Surgical
Industries, Padmanav
Nagar, Brahmanigram,
Cuttack
18.Bijoy Surgicals &
Chemicals, Plot No.120,
Phase-II, New I.E., Jagatpur,
cloth,
bleached,
nonsterilized woven in plain
weave with 26s count
yarns in warp way and
20s count yarn in weft
way, ends 150 threads per
dm. Min. and picks 85
threads dm. Min. Mass :
57 ± 5 g/m2 conforming to
IS: 863/88 per packet
consisting of 12 (twelve)
rolls. Size of each Roll :
4.0 mtr x 60 cm.
11.22
Cuttack-21 (Upto 31.12.07)
19. Subham Handloom &
Surgicals, At/P.O.Nuapatna, P.S.-Tigiria,
Cuttack-35
1.Maa Durga Handloom
Industries, Tirigia.
2.Biraja Surgical Industries,
Nuagarh, Telengapentha,
Cuttack-51.
3.Singhanath handloom,
Gopinathpur, Baramba,
Cuttack
4.Mama Surgicals,
Nuapatna, Cuttack.
5. Shyamakali Weaving
Factory,
Baramba,Gopinathpur,
Cuttack.
6. Indian Handlooms,
Champeidwar, Ragadipada,
Cuttack
7.Durga Madhab Village
Handloom Industries, At.
Dandasahi, P.O. Rajranpur,
Dist. Nayagarh
8.Bijoy Surgicals &
Chemicals, Jagatpur,
Cuttack
9. Chemie (India), Cuttack10.Shivasakti Surgicals,
Tigiria, Cuttack.
11. Smart Surgicals, At.
Gopinathpur, P.O.
Singhanath Pitha, Via.
Badamba, Dist. Cuttack.
12.Surgiplast India, Station
Road, Berhampur.
13.Satyabadi Gauge and
Bandage, Nuapatna, Tigiria,
Cuttack
14.Gayatri Bandage, Jajpur
15.Debashisa Gauge &
Bandage Enterprises,
Dhenkanal
16.Lakshmipati Bandage &
Gauze, Gajapati.
17.JBS Products, I.E., Old
Jagannath Road,
Madhupatna, Cuttack10(upto 31.12.07)
18.Biraja Surgical
Industries, Padmanav
Nagar, Brahmanigram,
Cuttack
19.Bijoy Surgicals &
Chemicals, Plot No.120,
Phase-II, New I.E., Jagatpur,
Cuttack-21 (Upto 31.12.07)
20.Subham Handloom &
Surgicals, At/P.O.Nuapatna, P.S.-Tigiria,
Cuttack-35
TERMS OF DELIVERY & TAXES :
1.The rates are ex-factory,inclusive of cost of packing and exclusive of value added tax which may
be charged extra as admissible if any.
2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations
charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of
one year from the date of issue of rate contract.
3.The delivery schedule may be mutually dicided between the rate contract holder and the
indenting officer.
69.
Rate Contract Circular No.1834 dt.1.3.07,3270 dt.23.5.07,5544 dt.12.7.07,6271 dt.17.8.07, 6278
dt.17.08.07,7414
dt.11.10.07,8144
dt.22.11.07,
8990
dt.31.12.07,27 dt.2.1.08, 34 dt.2.1.08, 668 dt.24.1.08,711
dt.25.1.08
Description of the store
Unit
Rate per unit Period of
Name of the rate contract
item
Rs.
validity
holding SSI units
TUBULAR
TRUSS
&
PURLINS
Mild steel tubular trusses
made out of ERW Tubes,
grade Y&T 210 Conforming
to IS No.1161/79 (3rd
Revision) duly painted with
red-oxide
primer.
The
detailed
material
composition is as follows:
a) M.S.Pipe
(ERW)
60.3mm
OD
771.74kg.
b) M.S. Pipe (ERW)
48.3mm
O.D131.59kg
c) MS Plate 6mm86.087kg.
d) M.S. plate 12 mm –
11.10- kg
e) M.S.
Electrodes
4mm – 156 Nos.
f) Oxygen Gas 1/6
Rate per
MT
42,478.00
02.03.2009
subject
to
validity of EPM
Regn.
Certificate and
VAT clearance
Certificate.
1.M/s. Nanda Enterprises,
At/P.O.- Burla, Sambalpur
(Annual Production capacity
– Rs.10,00,000/-
Cyl.
g) D.A. Gas – 1/12 cyl
h) Red oxide primer –
1.75 ltr.
Mild Steel Tubular Purlins
with runners brasing for
tubular trusses made out
of ERW tubes, Grade YST
210 conforming to ISS
No.1161/79 (3rd Revision)
duly painted with Redoxide primer.
Rate per
MT
42,228.00
TERMS OF DELIVERY & TAXES :
•
The rates are ex-factory, exclusive of VAT and Orissa entry tax which may be charged
extra as admissible, if any.
•
The minimum time allowed for delivery of goods and the delivery schedule may be
mutually decided between the indenting officer and the contract holder.
Rate Contract Circular No. 1860 dt.4.3.2008
70.
Description of the store
item
TARPAULIN
Common Water proofed
duck
and
paulin
(Tarpaulin) conforming to
IS No.2089/77 made out
of
cotton
duck
IS
No.1422/83
•
•
Variety-II
Variety-III
Unit
Rate per unit
Rs.
Rate per
Sqr.
Mtr.
Period of
validity
02.11.2008
87.70
70.75
Name of the rate contract
holding SSI units
1. Utkal Tarpaulin Industry,
I.E., Berhampur, Ganjam-8.
2. Konark Tarpaulin
Industries, Bapujinagar,
Bye-Pass Road, Jeypore764001, Dist. Koraput.
3.Das Tarpaulin, Plot No.42,
Shakti Nagar, Arunodaya
Market, Cuttack-12.
4. Modi Enterprisers,
At/P.O. Nayasarak, Cuttack2.
5. Modi Dyeing & Proofing
Works (P) Ltd., 59, New I.E.,
Jagatpur, Cuttack-21.
6.Hindustan Tarpaulin
Industries, I.E., Sri
Ramchandrapur,
Chhatrapur, Ganjam
7.Western Proofing
Industries, Khetrajpur,
Sambalpur - 753003
(Total 7 units)
8.Padhi Industries,Private
Plot 1380, Phase-2,
Bhimatangi, Bhubaneswar-2
(Valid upto 20.12.2007)
TERMS OF DELIVERY & TAXES :
1.The rates are exfactory & exclusive of value added tax which may be charged extra as applicable if
any.
2.The delivery schedule may e mutually decided between the Indenting Officer and the rate contract
holding SSI units.
3.In order to avoid any complaint regarding quality, the Indenting Officers are requested to take delivery
of the store items after conducting quality testing of their own. However on specific requisition from the
Indenting Officers, the technical officers of the Directorate of EP&M, Orissa will conduct Pre-delivery
Inspection.
Rate Contract Circular No. 7825 dt.3.11.2007,8041 dt.19.11.2007
71.
Description of the store
item
Type Writer Ribbon
Type writer Ribbon (Type1) heavy inking conforming
to IS:No.4174/77. The
cotton fabric shall conform
to IS:No.4686/80. The
ribbon shall be of the
following dimensions.
a) Length of Ribbon, 10
mtrs. ± 0.25mm
b)Width of Ribbon, 12.7
mm ± 0.4 mm
c) Thickness of Ribbon 0.14
to 0.18mm
Unit
Per roll
Rate per unit
Rs.
18.05
Period of
validity
25.02.2008
Name of the rate contract
holding SSI units
Konark Tapes, Kalyaninagar,
College Square, Cuttack
Terms of Delivery:
1.The rates are ex-factory, inclusive of cost of packing, exclusive of Value Added Tax and entry tax
which may be charged extra as admissible, if any.
2.The delivery schedule may be mutually decided between the rate contract holder and the Indenting
Officer.
3.In order to avoid any complaint regarding quality, the Indenting Officers are requested to take delivery
of the store item after conducting quality testing of his own. On specific requisition from the Indenting
Officer, the technical officers of the Directorate of Export Promotion & Marketing will conduct predelivery inspection(PDI) for which intimation should be sent to this Office sufficiently in advance.
Rate Contract Circular No.1485 dt.26.02.2007
72.
Description of the store
item
‘V’ TYPE CROSS ARM
Unit
Rate per unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
‘V’ Type Cross Arm:
3. 11 KV “V” Cross Arms
made
out
of
I.S.M.C.M.S. Channel
75x40 mm with two
Per Kg.
37.90
30.01.2008(E)
Mentioned below
coats of
Rex Oxide
Paints as per drawing
No.2624/73 of OSEB
having
approximate
weight of 11.2 kg.
4. 33 KV Cross Arm
made
out
of
I.S.M.C.M.S. Channel
100x50 mm with 2
coats of Rex Oxide
paints as per Drawing
No.1589/69 of OSEB
having
approximate
weight of 16.80 kg.
Per Kg.
37.80
TERMS OF DELIVERY & TAXES :
•
The rates are ex-factory and inclusive of Excise Duty,VAT and entry tax which may be
charged extra, as admissible, if any.
•
The delivery schedule may be mutually decided between the indenting officer and the
supplier.
Rate Contract Circular No. 6834 dt.7.9.07
Name of the Rate Contract holders
1. Sheo Industries, C-8, I.E., Cuttack-10(Annual Production Capacity Rs.87,00,000/2. Utkal Metal Products (P) Ltd., C-3, I.E., Berhampur-760 010, Ganjam(Annual Production Capacity
200MT, Rs.5,65,432/-)
3. Jena Engineering Works, Utkal Ashram Road, Berhampur, Pin-760001, Dist. Ganjam(Annual
Production Capacity 84 MT)
4.Sahoo Fabrication,At/P.O.-Bamra(Station Basti,Dist:Sambalpur-21(Annual Production Capacity 1000
nos. Rs.4,00,000/-)
5.MM& Company,I.E., Cuttack
6.Orissa Steel & wire Products Ltd.,B-14,I.E.,Cuttack-10(Annual Production Capacity 240MT
Rs.32,00,000/-)
7.Chhatia PanchayatIndustries Light engineering Co. Coperative Society Ltd.,At/P.O.-Chhatia,
Dist:Jajpur
8.Indian Metal Industries,Nayabazar,Cuttack-4
9.Konark enterprises, A-40,I.E.,Cuttack-10
10.Krishna Engineering Works,M.G.Road,P.O.-Jeypore,Dist:Koraput(60 MT Rs.5,00,000/-)
11.New Modern Technomech(P)Ltd., S-2/29,I.E.,Chancha,Baripada,Dist:Mayurbhanj(60 MT
Rs.5,00,000/-)
12.M.N.Engineering,Plot No.71, Fishery Lane, Chintamaniswar,BBSR,Dist:Khurda
73.
Description of the store
item
WOOLLEN
JERSEYS
SOCKS AND HOSE TOPS.
A. Khaki Woollen Jerseys
Unit
Rate per unit
Rs.
Period of
validity
Name of the rate contract
holding SSI units
with shoulder slits/plain
knitted
worsted
conforming
to
IS
No.2360/77
with
reinforcement made out of
marine wool.
Size:
80, 85,90, 95, 100,
105 cm.
B. Khaki woolen socks
knitted
worsted
conforming to IS: 2187/73
made out of Marino wool.
Size:
23, 24, 25, 26, 27,
28, 29, 30, 31 cm.
C. Khaki woollen hostops
knitted
worsted
conforming to IS: 2523/63
made out of marino wool.
Size:
45x6, 45x6.5,
50x6, 50x6.5 cm.
D. Khaki woollen jerseys
with shoulder slits/plain
knitted
worsted
conforming to IS: 2360/77
without
reinforcement
made out of worsted wool.
Sizes:
80, 85, 90, 95, 100
& 105 cm.
E. Khaki woollen socks
knitted
worsted
conforming to IS: 2187/73
made out of worsted wool.
Sizes:
23,24, 25, 26, 27,
28, 29, 30,31 cm.
F. Khaki woollen hostops
knitted worsted conforming to IS: 2523/63 made
Rate per
Piece
08.04.2008
1.
Orissa Wool
Industries, B-24, I.E.,
Cuttack-10. (Annual
Production Capacity
18000 nos.)
(Sl. No.’A’ to ‘F’)
2.
Sushree Garments,
New Rousa Patna,
Cuttack-753001.
(Annual Production
Capacity 5200 Pcs.)
(Sl. No. ‘A’,‘B’,‘D’& ‘E’
3.
Shakti Knitting Works,
At. Gopabandhu Vihar,
New Rousa Patna,
Buxi Bazar, Cuttack.
(Annual Production
Capacity Rs.10.00
lakhs)
(Sl. No. ‘A’,‘D’ and sizes
of 25, 26 & 27 of Sl.
No.A, B & E.
4. Saswot Industries,
Tarinibihar,
Bidanasi, Cuttack
(Annual Production
Certificate
Rs.15,00,000/)(Sl.No.A & D)
out of worsted wool.
Size:
45x6, 45x6.5, 50x6,
50x6.5 cm.
(A)
Khaki
Woollen
Jerseys with shoulder
slits/plain
knitted
worsted conforming to IS
No.2360/77
with
reinforcement made out
of marine wool.
Sl.
No
(a)
(b)
(c)
(d)
(e)
(f)
Size
in
cm
80
85
90
95
100
105
Weight of
10 pcs in
cms.
4480
5330
5610
5900
6180
6460
264/316/334/353/371/387/-
B. Khaki woolen socks
knitted
worsted
conforming
to
IS:
2187/73 made out of
worsted wool.
Sl.
No.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
Size
in
cm
23
24
25
26
27
28
29
30
31
Weight of
10 pcs in
Gms.
850
920
1000
1060
1130
1200
1270
1340
1410
C. Khaki woollen hostops
knitted
worsted
conforming
to
IS:
2523/63 made out of
39/42/45/48/52/54/57/60/63/-
marino wool.
Sl.
No.
Size in
cm
(a)
(b)
(c)
(d)
45
45
50
50
x
x
x
x
6
6.5
6
6.5
Weight
of 10
pcs in
cms.
1110
1170
1250
1310
D. Khaki woollen jerseys
with shoulder slits/plain
knitted
worsted
conforming
to
IS:
2360/77
without
reinforcement made
out of worsted wool.
Sl.
Size
Weight of
No. in
10 pcs in
cm
Gms.
(a)
80
3980
(b)
85
4830
(c)
90
5110
(d)
95
5480
(e)
100
5680
(f)
105
5960
E. Khaki woollen socks
knitted
worsted
conforming
to
IS:
2187/73 made out of
Marino wool.
Sl.
Size
Weight of
No. in
10 pcs in
cm
Gms.
(a)
23
850
(b)
24
920
(c)
25
1000
(d)
26
1060
(e)
27
1130
(f)
28
1200
(g)
29
1270
(h)
30
1340
(i)
31
1410
F. Khaki woollen hostops
66/69/74/77/-
191/229/241/255/268/280/-
54/58/62/66/70/74/78/81/85/-
knitted
worsted
conforming
to
IS:
2523/63 made out of
worsted wool.
Sl.
Size in
Weight
No. cm
of 10
pcs in
Gms.
(a)
45 x 6
1110
(b)
45 x 6.5 1170
(c)
50 x 6
1250
(d)
50 x 6.5 1310
48/
50/54/56/-
TERMS OF DELIVERY & TAXES :
• The rates are ex-factory and inclusive of cost of packing and exclusive of VAT and entry tax which
may be charged extra, as admissible, if any.
•
•
The delivery schedule may be mutually decided between the indenting officer and the supplier.
In order to avoid any complaint regarding quality, the Indenting Officers are requested to take
delivery of the store items after doing quality testing of their own. However, on specific requisition
from the Indenting Officer the technical officer of his Directorate of EP&M,Orissa,will conduct predelivery inspection of the store items.
Rate Contract Circular No. 6309 dt.18.8.07, 6685 dt.4.9.07