VANGUARD® VM-1020-7X15-46-A OR RG
Model Specifications
LED Panel Technology
LED Panel Access
Mounting Type
Character Height
Characters per Line³
LED Panel Weight
Dimensions
LED Panel Face Finish
LED Panel Housing Finish
Ventilation
Border Width
Pixel Matrix
Pixel Pitch
Viewing Distance
Typical Amber LED Panel Intensity
Typical Red/Green/Amber LED Panel Intensity
LED Color
Operating Temperature Range
Humidity Range
High-intensity LED
Front access
Surface mount
12"
3
19 lbs per sign panel
1' 5" H x 2' 7" W x 2" D
Kynar semi-gloss black paint
Mill finish aluminum
Passive ventilation system
2.0" All Sides
7 rows by 15 columns
1.8" (46mm)
600 feet
9,200 cd/m2
Amber: 9,200 cd/m2, Red: 5,000 cd/m2, Green: 5,000 cd/m2
Amber or Red/Green/Amber
-34°F to +115°F
0-99% Non-condensing
Equipment Cabinet
Front access single door
Pole mount
Corbin #2
3' 3" H x 2' 0" W x 1' 1" D
135 lbs
DDMS Controller
Mill finish aluminum
Forced air ventilation with filtered intake
120/240-3 wire plus ground
NTCIP Version 1 or 2
Cellular, fiber-optic, direct Ethernet or radio Ethernet
Local control through LCD/Keypad
Cabinet Access
Mounting Style
Lock Key Type
Dimensions
Weight
Sign Controllers
Cabinet Finish
Ventilation
Power Source
Communications Protocol
Communications Options
Optional Auxiliary Control Panel
NOTES
1.
2.
3.
Amps Per Leg numbers are based on maximum load of typical DDMS, including a fully loaded 15A convenience outlet. Amps per leg value for 120/240 3W+G system. This number could vary depending on options installed in DDMS, such as additional control cabinet. Contact Daktronics for more information.
Typical Power includes a partially illuminated LED sign (with 30% pixels at 100% intensity), along with DDMS controller, DDMS cabinet ventilation, external communication equipment within DDMS cabinet.
Consistent with Daktronics continuous improvement program, all product features are subject to change without notice.
Typical Power Numbers
Model
VM-1020-7x15-46-A or RG
# of LED
Panels
per site
Typical "Per Set" Power
(Amber and Red/
Green/Amber)
1
124 W
2
136 W
3
147 W
4
159 W
5
171 W
6
182 W
Amps
Per Leg
16
12" Characters
Amber or Red/Green/Amber
VANGUARD® VM-1020-7X15-46-A OR RG
VM-1020 DDMS Parameters
2+
E-PASS Toll
To I-494
• A DDMS set includes: 1 – 6 LED panel(s) and a DDMS cabinet
$2.00
8 MIN
Mount 1 to 6 LED
panels per static panel
All DDMS controlled
by a single controller in
DDMS cabinet
• Multiple LED panels can be mounted to a single or multiple static panels
• Multiple lines require multiple LED panels
Conduit for signal
and power cable
provided by others
(350 Feet Max. Run)
Static Panel(s) + LED Panel(s) = DDMS Panel(s)
• LED panels are flexible in their ability to be aligned and oriented to static text on the static panel
• Each LED panel employs a single line matrix
• Max power cable run is 350 feet from farthest LED panel to DDMS cabinet
• All LED panels must be the same matrix width
Pole Mounted
DDMS Cabinet
• Toll, travel time, and status information can be intermixed and displayed on multiple LED panels within a set
DDMS Set
Optional Equipment
Mounting Kit
For additional configuration options, contact Daktronics.
117 Prince Drive PO Box 5120 Brookings, SD 57006-5120
tel 888-325-8726 605-692-0200 x57060 fax 605-697-4700
www.daktronics.com email [email protected]
Vanguard® is a registered trademark of Daktronics
Copyright © 2012 Daktronics DD1645256 Rev 04 121412