Fixette ®
Fixette ® – the fast, flexible
marking for already cured
elastomeric products
w
w
w
.se
rip
s
la
tic
c
a.
om
Fixette ®
The Fixette ® is a transfer marking, especially designed
for rubber, to be used after the vulcanization. During
a hot pressing process the color transfers permanently
into the cured rubber product.
Elastomeric article: Labelling of finished rubber products
Operation:
highly-qualified special marking for the rubber
industry and very fast and automated application
process, with an excellent durability
Colors:
color scale (Pantone, HKS, RAL)
Color matching:
matt
Rubber definition:
applicable on all popular elastomeric types –
material tests are recommended- for e.g. SBR,
EPDM
Transfer parameters:
320°F - 356°F (160°C - 200°C) — 10 - 20 sec. — 3 - 4 Bar
Length for roll:
Endless-customized on the clients’ production
process, with Scanner Marks
Length for sheet:
min. 4 inches, max. 55 inches
Width for sheet:
1 till 20 inches and bigger till maximum 47 inches –
depending on the clients’ requirements
Backing material:
foil 75µm / 0,0029’’
Transfermaterial:
ca. 20µm / 0,00078’’
Durability:
min. 1 year
Adhesion / Abrasion:
good to very good
Storage: dry, dark areas
Delivery form:
roll = endless, sheet = width x length, pierced
into form
Package:
according to customer instructions
Extra:
The application is suitable for the following
industries: Motorsport, Automotive, Industrial,
Sports and Leisure
Structure / Design: Using Instructions
1: Sheet
heatpress
backing
2: Roll
color layer
elastomeric
ground
1:
Seri Plastica GmbH
Define and
clean the rubber
sur face.
2: Apply Fixette
®
with the color layer
on the rubber.
3:
Define hot press/
stamp process and
operate so.
4:
Take off the
base material Ready!
Velaskostraße 6
85622 Feldkirchen
Ger many
Telefon:
+49 (0)89 - 903 80 75
Characteristics
Advantages
Material
Special developed material and color for a standard,
fast and process reliable application. The optimal
characteristics like transfer and durability, distinguish
this product from others.
Customer individual product
The Fixette ® is being developed individually during
different process parameters for each field of application. This way it is assured, that all its elements generate ideal results.
Telefax:
+49 (0)89 - 904 39 16
[email protected]
www.seriplastica.com
Fixette ®
1
Material
define area (clean, dry, siliconefree) on the
rubber (tire oder elastomeric article)
3
Apply
place the Fixette ® with the color layer to the
rubber into the defined area
5
Heatprocess
2
Label
choose marking tool (sheet, roll, pierced
into form)
4
Placement
put the rubber into the
heattransferpress
6
Removal
instruction
for use
preassure: 3 - 4 Bar
time: 10 - 20 sec.
temperature: 320° F - 356° F (160° C - 200° C)
7
Finishing
remove after treatment – attention! hot!!
8
Ready!
Seri Plastica GmbH
Velaskostraße 6
85622 Feldkirchen
Ger many
Telefon:
+49 (0)89 - 903 80 75
Telefax:
+49 (0)89 - 904 39 16
[email protected]
www.seriplastica.com
pull off the backing from the warm rubber of
the finished label
in addition to the manual use of the label it
also fits whithin an automatic process using
rollaplications