Submittal Sheet - Dero Bike Racks

ULTRA SPACE SAVER SQUARED
Submittal Sheet
CAPACITY
Modular construction
1 biker per arm
MATERIALS
Hanger is 1” square tube with steel slider head with
tamperproof locking bolts.
Upright is 2” square tube.
Feet are AISI C3 x 4.1 galvanized steel channel. Crossbeams
are 2” sched. 40 powdercoated pipe.
FINISHES
Powder Coat
Our powder coat finish assures a high level of adhesion and
durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied to exterior
3. Final thick TGIC polyester powder coat
81”
81”
Single Sided
Double Sided
30”
56”
Wall Mount
min.
ceiling
87"
Galvanized
An after fabrication hot-dipped galvanized finish is our
standard option.
36"
36"
30"
40"
56"
80"
57.5"
47.5"
116"
MOUNT
OPTIONS
Floor Mount Ultra Space Saver Squared have steel channel
feet (30” for single sided and 56” for double sided units)
which must be anchored to the floor.
Wall Mount
A wall mounted unit which contains special brackets is also
available.
Optional wheel stops
are available
WHEEL
STOPS
8”
Include optional wheelstops
16”
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
40”
36”
Aisle
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
19’4”
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Aisle
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
As a general rule of
thumb, this space can fit
approximately 60 bicycles.
The Ultra Space Saver Squared
parks one bike every 16” with a
typical bike extending out 40”
from the wall.
21’8”
www.dero.com
© 2016 Dero
|
1-888-337-6729