Medium voltage - Cable
accessories up to 36 kV
Tapes
Connection technique
Tools
TABLE OF CONTENTS
General information........................................................................................................................ 6 – 7
CAST RESIN-TECHNIQUE ..................................................................................................................................................8 – 11
Straight-through joints for polymeric-insulated cable up to 6 kV.. ........................................................ 10
Transition joints from polymeric-insulated cable to belted cable up to 6 kV...................................... 11
HEAT SHRINKINGTECHNIQUE
............................................................................................................................................... 12 – 54
Straight-through joints for 3-core polymeric-insulated cable, armored,
without outer conductive layer.................................................................................................................... 14
Straight-through joints for 3-core polymeric-insulated cable, with concentric conductor,
without outer conductive layer.................................................................................................................... 15
Straight-through joints for 3-core paper-insulated belted cable............................................................ 16
Transition joints from paper-insulated belted cable to 3-core polymeric-insulated cable.. .............. 17
Transition joints from paper-insulated belted cable to 3 x 1-core polymeric-insulated cable......... 18
Terminations for connecting electrical machinery.................................................................................... 19
Indoor-terminations für 3-core polymeric-insulated cable
with outer conductive layer, unarmored..................................................................................................... 20
Indoor-terminations for 3-core polymeric-insulated cable
without outer conductive layer, armored................................................................................................... 21
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers ............................................................................ 22
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and .
different conductive layers, with Al-compression ferrule and screen wire-compression ferrule..... 23
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and .
different conductive layers, with Cu-compression ferrule and screen wire-compression ferrule...... 24
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen
and different conductive layers, with screw connector and screen wire-screw connector ............. 25
Indoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen,
unarmored........................................................................................................................................................ 26
Indoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen,
unarmored, with screw cable lug and screen wire-screw cable lug......................................................... 27
Outdoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR)
with wire screen, unarmored.. ...................................................................................................................... 28
Outdoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen,
unarmored, with screw cable lug and screen wire-screw cable lug...................................................... 29
Straight-through joints for cable with wire screen per core, unarmored............................................. 30
Straight-through joints for polymeric-insulated cable with common screen and armoring............. 31
Transition joints from paper-insulated belted cable to 3-core polymeric-insulated cable,
with single concentric screen, unarmored................................................................................................. 32
Transition joints from paper-insulated belted cable to 3 x 1-core polymeric-insulated cable......... 33
Spreading joints from 3-core to 3 x 1-core polymeric-insulated cable................................................. 34
Indoor-terminations for 3-core polymeric-insulated cable, (PE, XLPE, EPR)
with wire screen and different conductive layers, unarmored............................................................... 35
Outdoor-terminations for 3-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers, unarmored............................................................... 36
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers..................................................................................... 37
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers, with Al-compression ferrule and screen wire-compression ferrule....... 38
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers, with Cu-compression ferrule and screen wire-compression ferrule...... 39
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen
and different conductive layers, with screw connector and screen wire-screw connector............... 40
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers..................................................................................... 41
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers, with screw cable lug and screen wire-screw cable lug.......................... 42
2
GT Cable accessories up to 36 kV
TABLE OF CONTENTS
Outdoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers..................................................................................... 43
Outdoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen
and different conductive layers, with screw cable lug and screen wire-screw cable lug................... 44
Spreading joints from 3-core to 3 x 1-core polymeric-insulated cable.................................................... 45
Transition joints from 3-lead sheath cable to 3 x 1-core polymeric-insulated cable.......................... 46
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers..................................................................................... 47
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR)
with wire screen and different conductive layers..................................................................................... 48
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen
and different conductive layers, with screw cable lug and screen wire-screw cable lug.................... 49
Outdoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen
and different conductive layers, with screw cable lug and screen wire-screw cable lug.................... 50
Heat-shrinking tubes for bus bar insulation.............................................................................................. 51
Heat-shrinking tape for bus bar insulation................................................................................................ 52
Track-resistant heat-shrinking tubes – type SSKF
Track-resistant heat-shrinking tube – type SSKF on spools à 15 m....................................................... 53
Track-resistant insulating mold parts.......................................................................................................... 54
EleCTRO-TAPES
............................................................................................................................................... 56 – 64
High voltage splice tape no. 40.................................................................................................................... 57
High voltage-insulation tape no. 30............................................................................................................ 58
Semi-conducting tape no. 50....................................................................................................................... 59
Sealing tapes................................................................................................................................................... 60
Hotmelt adhesive tape type HB................................................................................................................... 61
Cable insulation compound no. 35............................................................................................................. 62
Glass fabric reinforced tape no. 70............................................................................................................. 63
Copper braid tape no. 60, copper braid tube no. 61............................................................................... 64
MOUNTING TECHNIQUE
............................................................................................................................................... 66 – 67
Constant force springs................................................................................................................................... 67
MOUNTING ASSISTANCE ............................................................................................................................................... 68 – 69
Cleaning tissue, cable cleaner, cable lubricant gel................................................................................... 69
CONNECTION
TECHNIQUE
............................................................................................................................................... 70 – 85
Screw connectors with shear-off head bolts, screen connector with shear-off head bolts,
screen wire cable lug with shear-off head bolt.. ....................................................................................... 71
Cu-compression ferrules, Cu-compression ferrules with oil stop.......................................................... 72
Cu-reduction compression ferrules............................................................................................................. 73
Al-compression ferrules non-tension, Al-compression ferrules with oil stop.. .................................... 74
Al-reduction compression ferrules with oil stop....................................................................................... 75
Al-Cu-compression ferrules.. ......................................................................................................................... 76
Cu-compression cable lugs, uncoated........................................................................................................ 77
Cu-compression cable lugs, tin-plated........................................................................................................ 78
Cu-compression cable lugs, longitudinal water-proof, uncoated........................................................... 79
Cu-compression cable lugs, longitudinal water-proof, tin-plated.. ........................................................ 80
Al-compression cable lugs, uncoated.......................................................................................................... 81
Al-compression cable lugs, tin-plated......................................................................................................... 82
Al-compression cable lugs, longitudinal water-proof, uncoated.. .......................................................... 83
Al-compression cable lugs, longitudinal water-proof, tin-plated........................................................... 84
Al-Cu-compression cable lugs, longitudinal water-proof, uncoated...................................................... 85
TOOLS
............................................................................................................................................... 86 – 91
Tool set............................................................................................................................................................. 87
Edge cutter, peeling tool............................................................................................................................... 88
Peeling tool, jacket cutter, transport case.................................................................................................. 89
Shrink-tool set type SWS 1, type SWS 2, spare parts............................................................................... 90
Article-number index............................................................................................................................92
GT Cable accessories up to 36 kV
3
GT Electrotechnical Products
Cable accessories. Just as important as the cable.
Since 1995 GT Elektrotechnische Produkte GmbH develops, produces and sells cable-accessories,
techniques and mounting supports for reliable cable connections.
Our competence is worldwide appreciated – for good reasons: our quality management and our research
for new technical and economical solutions give us the opportunity to offer you products which create
a standard in their field. The history of our company is short. But successful!
4
GT Cable accessories up to 36 kV
Low voltage
Telecommunication
Medium voltage
1995 In the foundation year we had been concentrated in building up offices and production.
Our name was quickly found: GT is the German abbreviation for “cable-accessories”.
1996
Our first development on the market: A range of cast resin joints with a lot of space for splicing.
Our customers like it till now. We started our production with a computerized bag filling
system for cast resin.
1998
GT-quality-management-system was certified according to DIN ISO 9000.
1999
A new range was created: Medium voltage - heat shrinking products.
2000
GT developed their own equipment for producing heat-shrinking tubes and produced their first
wall ducts.
2002
GT had to increase production area because of increasing demand.
2003
The company offered their employees an old age pension because of well-establishment.
2004
GT moved into a new, modern building. Production area increased by more than 1500 sqm.
2005
Development and introduction of new range of cast resin joints type GT 10 – GT 13.
2006
Introduction of new, proprietary GEL technique in the market.
Foundation of a company in Romania together with partners.
2007 Build up of a test laboratory for cable accessories according to DIN EN 50 303.
GT Cable accessories up to 36 kV
5
GT ... certainly the better connection
Product training
Quality and characteristics of products are only useful by a system-compatible application. We train our
employees and customers again and again with modern methods. This is our way of succeeding a high
level of safety by advising our customers in mounting of our products.
Quality
In order to guarantee customers’ confidence constantly we proof systematically all materials delivered to
us as well as products we deliver. Regular internal and external quality audits confirm high standard of our
processes. Laws and instructions are changing constantly. In October 2008 a new European standard will
be valid:
“Method of tests and test requirements ... (1,2 kV)“ for cable accessories for distribution cables with a
nominal voltage of 0,6/1,0 (1,2 kV). This new European standard DIN EN 50 393 will replace the old national
law DIN VDE 0278-623. We make tests with our test laboratory according to DIN EN 50 393 and create
a reliable documentation of test cuttings.
Recycling
We care and encourage ecological handling of resources.
6
GT Cable accessories up to 36 kV
Professional support service
We inform you competently about our products and their applications. Detailed, illustrated mounting
instructions assist in quick and errorless mounting.
We are always at your disposal
Our sales representatives are competently trained. In case of any questions they are at your disposal.
It goes without saying that we assist you in solving problems also during mounting at site.
Test desired?
Practical demonstration on site are welcome. There we can show the advantages of our products.
You can test our products practically.
What to do in case of emergency?
Failures in cable network happen in unsuitable time. One of our consultants is always available by
telephone. We help you unconventionally also on Sundays and general holidays.
You need it urgently
We have a high stand-by delivery. In combination with our flexible staff we guarantee quickest supply.
Construction site overseas
We don’t let you alone. In many countries our products are adapted to local systems.
GT Cable accessories up to 36 kV
7
CAST RESIN-TECHNIQUE
Cast Resin-Technique
by GT
8
GT Cable accessories up to 36 kV
CAST RESIN-TECHNIQUE
Application:
The range of cast resin accessories includes straight
joints, branch joints, double branch joints and transition
joints. In order to use the wide application range
completely, the joints are delivered without connectors
and clamps. But they can be delivered on request.
Advantages
One system for all voltage ranges:
– For filling or producing of cable accessories or parts of them for:
Telecommunication and signalling
cable, power cable up to 1 kV and
power cable up to 10 kV
– With cast resin optimally adapted
to application
– All cast resins are halogen-free
– Transparent mixing bag for
controlling mixing procedure
– Closed system – no impurities
during mixing possible
– With mold forms of hit-proof,
high-quality, transparent synthetic
material – for visual control during
operation
GT cast resin accessories are longitudinal as well as
cross-waterproof.
All cast resin accessories are qualified for use of
PVC-, PE-X (XLP), and PE-insulated conductors and
cables. We deliver suitable accessories for paperinsulated cables. The kits are usable outdoor, indoor,
in ground, water and installation ducts .
Cast resin type GA
The cast resin type GA is a 2-component-polyurethanic cast resin system
and corresponds to DIN VDE 0291 part
2. It is qualified for nominal voltage up
to 10 kV.
The cast resin will be delivered in a
transparent mixing bag.
After removing the protective bag and
the separator, the 2 components flow
together and must be mixed – in a
closed system – for about 3 minutes.
A threaten of fitter or environment is
thereby excluded. The homogene
mixture can be seen by even clouring.
The bags are high-resistant against
pressure and impacts. Can be delivered
in tins on request.
Features
– High hydrolosis strength
– CO 2 gas producing < 10 ml (Hydrophobia)
– No depositing of filling material
– Excellent adhesive strength on
metal and synthetic material
– Thin-fluid after mixing
– Resistant against UV-rays and
chemical influences
– Soft-elastic after hardening
– Alcalic-resistant
– Longe storage time up to 40 months
– The used mixing bag can be
removed with the normal garbage
Further information can be found in
technical documentation TD102400E.
For special application cast resin
types GB, GW, GC and other are
available.
GT Cable accessories up to 36 kV
9
CAST RESIN-TECHNIQUE
Cast resin-technique, 3-core, 3,6/6 kV
U 0/U (U m) 3,6/6 (7,2) kV
6 kV 3-CORE
Application
– For connecting armored/unarmored three core cable with PVC, PE and XLPE insulation
– Applicable for compression ferrule
– Indoor and outdoor, ground, in water and
installation ducts
Advantages
– With PUR-cast resin type GA
– Cast resin tested according to DIN VDE 0291
– Longitudinal and cross-waterproof
– With solderless earthing material
– Easy and safe mounting
Straight-through joints for polymeric-insulated cable up to 6 kV
Cable Ø
from – up
to mm
Number of cores x
Nominal cross-section
mm2
Dimensions
LxH
mm
Article
Number
Type
23 – 48
32 – 68
45 – 70
50 – 80
3 x 70
3 x 120
3 x 240
3 x 300
430 x 108
530 x 132
700 x 180
900 x 190
010 522
010 628
010 523
010 524
GT-A-5 3/6
GT-A-6 3/6
GT-A-7 3/6
GT-A-8 3/6
Delivered set
– Cast resin type GA in transparent mixing bag
– Transparent shells
– Distance holder (only GT 5)
– Copper braid tube
– Brackets
– Sealing tape (GT 7 and GT 8 foam sealings)
– Protecting gloves
– Mounting instruction
GT 5 3/6 up to GT 6 3/6
10
GT Cable accessories up to 36 kV
Accessories
– Connector
– Cable cleaner type KR
– Cleaning tissue type RT
GT 7 3/6 up to GT 8 3/6
CAST RESIN-TECHNIQUE
Cast resin-technique, 3-core, 3,6/6 kV
U 0/U (U m) 3,6/6 (7,2) kV
6 kV 3-CORE
Application
– For connecting armored/unarmored three core cable with PVC, PE and XLPE insulation to belted cable
– Applicable for compression ferrule
– Indoor and outdoor, ground, in water and
installation ducts
Advantages
– Hit-proofed shells made of polycarbonate
– Big splicing space
– Longitudinal and cross-waterproof
– With hydrolysis-resistant PUR-cast resin type GA
– Mixing procedure can be checked optically
Transition joints from polymeric-insulated cable to belted cable up to 6 kV
Cable Ø
from – up
to mm
Number of cores x
Nominal cross-section
mm2
Dimensions
LxH
mm
Article
Number
Type
23 – 48
32 – 68
45 – 70
50 – 80
3 x 70
3 x 120
3 x 240
3 x 300
430 x 108
530 x 132
700 x 180
900 x 190
010 520
010 625
010 626
010 627
GT-A-Ü 5 3/6
GT-A-Ü 6 3/6
GT-A-Ü 7 3/6
GT-A-Ü 8 3/6
Delivered set
– Cast resin type GA in transparent mixing bag
– Transparent shells
– Distance holder (only GT 5)
– Copper braid tube
– Solderless earthing material
– Oil stop
– Sealing tape (GT 7- and GT 8-sealing)
– Protecting gloves
– Mounting instruction
GT 5 3/6 up to GT 6 3/6
Remarks
Hardened cast resin can be
removed with the normal garbage.
GT 7 3/6 up to GT 8 3/6
GT Cable accessories up to 36 kV
11
HEAT-SHRINK TECHNIQUE
Heat-shrink
Technique
up to 36 kV by GT
12
GT Cable accessories up to 36 kV
HEAT-SHRINK TECHNIQUE
All accessories are subject to the principle that the accessories are as failsafe and reliable as the cable. The high
quality of the product and the detailed mounting instruction correspond to this principle.
The large, complete product range consists of straight-,
transition- and end-joints as well as terminations for
different cable constructions. All accessories comprise
necessary parts for protecting cable elements.
GT shrinking products are produced with high-quality
compounds – are extremely cross-linked – and are coated
alternatively with adhesive. Depending on application the
inner coating consists of formulated hot-melting adhesive
or sealing material.
Strictly observing our production process according to
DIN EN ISO 9001 guarantees a constant quality.
Application
The accessories are suitable for all PVC-, PE-X
(XLPE) and PE-insulated cables. Suitable accessories for paper-insulated as well as for cables
filled with insulating material are also available.
Heat shrinking products show a high mechanical
strength and guarantee a continuous elasticity. The use outdoor, indoor, in the earth or
in installation ducts is ensured for long time.
A detailed mounting instruction is attached
to each combined product and facilitates the
installation. This mounting-friendliness increases
the security additionally.
Advantages
– Easy mounting
– Good resistance against UV-rays
– Wide cross-section area
– Large product range
– Highly resistant against alkaline earths
– Halogen-free
– Free of substances which can jam wetting of lacquer
– Re-opening possible
– Small space necessary
– Cross-waterproof
– Economical
– Unlimited storage
GT Cable accessories up to 36 kV
13
3-CORE 3,6/6 kV
Straight-through joints for 3-core polymeric-insulated armored cable,
without outer conductive layer
Application
– For connecting armored three-core cable with PVC, PE and XLPE insulation
– Suitable for compression ferrule on aluminium- and copper conductor
– Indoor and outdoor, ground, in water and
installation ducts
6 kV 3-CORE
Advantages
– UV-resistant
– Good mechanical stability
– Halogen-free
– Large range of application
– Good resistance against alkaline earths and
chemical influences
– Very good electrical insulation
– Unlimited storage
– Cross-waterproof
Straight-through joints for 3-core polymeric-insulated cable, armored, without outer conductive layer
Number of cores x
Nominal cross-section
mm2
Connector
ø max.
mm
Dimensions
LxD
mm
Article
Number
Type
3 x 25 – 70
3 x 50 – 150
3 x 120 – 300
18
25
34
850 x 85
1000 x 105
1200 x 110
240 001
240 051
240 102
SMB 6/3 25 – 70
SMB 6/3 50 – 150
SMB 6/3 120 – 300
Delivered set
– Outer joint
– Inner jacket joint
– Mastic
– Insulating tubes
– Binding wire
– Constant force springs
– Copper braid tube
– Mounting instruction
14
GT Cable accessories up to 36 kV
Accessories
– Compression ferrule – Cleaning tissue type RT
– Cable cleaner type KR
– Abrasive cloth
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression ferrules
Outer joint with sleeve
3-CORE 3,6/6 kV
Straight-through joints for cable with concentric conductor,
without outer conductive layer
Application
– For connecting unarmored three-core cable with PVC, PE and XLPE insulation
– Indoor and outdoor, ground, in water and
installation ducts
6 kV 3-CORE
Advantages
– UV-resistant
– Good mechanical stability
– Halogen-free
– Large range of application
– Good resistance against alkaline earths and
chemical influences
– Very good electrical insulation
– Unlimited storage
– Cross-waterproof
– With solderless earthing accessories
Straight-through joints for 3-core polymeric-insulated cable, with concentric conductor, without outer
conductive layer
Number of cores x
Nominal cross-section
mm2
Connector
Dimensions
max. Ø
mm
LxD
mm
3 x 25 – 70
3 x 50 – 150
3 x 120 – 300
18
25
34
850 x 85
1000 x 105
1000 x 110
Delivered set
– Outer joint
– Inner jacket joint
– Mastic
– Insulating tubes
– Solderless earthing set
– Cleaning set
– Mounting instruction
Accessories
–Compression ferrule
– Cable cleaner type KR
Article
Number
Type
240 003
240 053
240 103
SMC 6/3 25 – 70
SMC 6/3 50 – 150
SMC 6/3 120 – 300
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression ferrules
Outer joint with sleeve
GT Cable accessories up to 36 kV
15
3-CORE 3,6/6 kV
Straight-through joints for 3-core belted cable
Application
– For connecting 3-core paper-insulated
belted cables
– Suitable for compression ferrule on aluminium- and copper conductor
– Indoor and outdoor, ground, in water and
installation ducts
6 kV 3-CORE
Advantages
– UV-resistant
– Halogen-free
– Good resistance against alkaline earths and
chemical influences
– Very good electrical insulation
– With solderless earthing accessories
Straight-through joints for 3-core paper-insulated belted cable
Number of cores x
Nominal cross-section
mm2
Connector
ø max.
mm
Dimensions
LxD
mm
Article
Number
Type
3 x 16 – 50
3 x 70 – 120
3 x 120 – 300
16
22
34
1300 x 120
1400 x 130
1600 x 140
242 010
242 011
242 012
SMPB 6/3 16 – 50
SMPB 6/3 70 – 120
SMPB 6/3 120 – 300
Delivered set
– Outer joint
– Constant force springs
– Cleaning set
– Earthing set
– Stranded copper wire
– Mounting instruction
16
– Oil-barrier tubes
– Mastic
– Insulating tubes
– Pressure tubes
– Binding wire
GT Cable accessories up to 36 kV
Remark
Connectors with
oil stop have to
be used.
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
–Compression ferrules
– Cable cleaner type KR
On request
With compression ferrules
Outer joint with sleeve
3-CORE 3,6/6 kV
Transition joints from 3-core belted cable to 3-core polymeric-insulated cable
6 kV 3-CORE
Application
– For connecting 3-core paper-insulated
belted cable to 3-core polymeric-insulated cable without outer conductive layer
– Suitable for compression ferrule on aluminium- and copper conductor
– Indoor and outdoor, ground, in water and
installation ducts
Advantages
– UV-resistant
– Halogen-free
– Good resistance against alkaline earths and
chemical influences
– Very good electrical insulation
– With solderless earthing accessories
Transition joints from paper-insulated belted cable to 3-core polymeric-insulated cable
Number of cores x
Nominal cross-section
Connector
ø max.
Dimensions
LxD
mm2
mm
mm
3 x 25 – 120
3 x 120 – 300
3 x 300 – 630
22
34
52
1200 x 120
1200 x 130
1500 x 140
Delivered set
– Outer joint
– Constant force springs
– Cleaning set
– Earthing set
– Spreader cap
– Mounting instruction
– Oil-barrier tubes
– Mastic
– Insulating tubes
– Pressure tubes
– Binding wire
Article
Number
Type
242 019
242 022
242 023
SÜM 6/3/3 25 – 120
SÜM 6/3/3 120 – 300
SÜM 6/3/3 300 – 630
Remark
Connectors with
oil stop have to
be used.
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
–Compression ferrules
– Cable cleaner type KR
On request
With compression ferrules
Outer joint with sleeve
GT Cable accessories up to 36 kV
17
3-CORE 3,6/6 kV
Transition joints from 3-core belted cable to 3 x 1-core polymeric-insulated cable
6 kV 3-CORE
Application
– For connecting 3-core paper-insulated
belted cable to 3 x 1-core polymeric-insulated cable with outer conductive layer
– Suitable for compression ferrule on aluminium- and copper conductor
– Indoor and outdoor, ground, in water and
installation ducts
Advantages
– UV-resistant
– Halogen-free
– Good resistance against alkaline earths and
chemical influences
– Very good electrical insulation
– With solderless earthing accessories
Transition joints from paper-insulated belted cable to 3 x 1-core polymeric-insulated cable
Number of cores x
Nominal cross-section
mm2
Connector
ø max.
mm
Dimensions
LxD
mm
Article
Number
Type
3 x 35 – 120
3 x 120 – 300
3 x 300 – 630
22
34
52
900 x 90
1100 x 140
1400 x 160
242 016
242 017
242 018
SÜM 6/3/1 35 – 120
SÜM 6/3/1 120 – 300
SÜM 6/3/1 300 – 630
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Pressure tubes
– Spreader cap
18
– Oil-barrier tubes
– Constant force springs
– Cleaning set
– Earthing set
– Sealing set
– Mounting instruction
GT Cable accessories up to 36 kV
Remark
Connectors with
oil stop have to
be used.
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
–Compression ferrule
– Cable cleaner type KR
On request
With compression ferrules
Outer joint with sleeve
3-CORE 3,6/6 kV
Terminations for connecting electrical machinery
6 kV 3-CORE
Application
– The terminations are used for connecting polymeric-insulated cables in machine
connection boxes
– The earth connection is performed with a complete solderless earthing set
– The connecting bolts can be insulated additionally with the mold part type SIR
Advantages
– UV-resistant
– Halogen-free
– Very good electrical insulation
Terminations for connecting electrical machinery
Number of cores x
Nominal cross-section
mm2
Dimensions
Length
mm
Article
Number
Type
3 x 35 – 70
3 x 95 – 150
3 x 185 – 240
450
450
450
230 002
230 052
230 151
SMA 6/3 35 – 70
SMA 6/3 95 – 150
SMA 6/3 185 – 240
Delivered set
– Spreader cap
– Mastic
– Insulating tubes
– Earthing set
– Mounting instruction
Accessories
– Cable lugs
– Cleaning tissue type RT
– Cable cleaner type KR
– Abrasive cloth
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression cable lugs
Insulating parts type SIR
GT Cable accessories up to 36 kV
19
3-CORE 3,6/6 kV
Terminations for 3-core polymeric-insulated cable
Application
– For connecting 3-core polymeric-insulated
cable with PVC, PE and XLPE insulation
– Indoor
6 kV 3-CORE
Advantages
– UV-resistant
– Very good electrical insulation
– Economical
– Easy mounting
Indoor-terminations for 3-core polymeric-insulated cable with outer conductive layer, unarmored
Number of cores x
Nominal cross-section
mm2
Dimensions
L
mm
Article
Number
Type
3 x 16 – 70
3 x 16 – 70
3 x 16 – 70
3 x 50 – 150
3 x 50 – 150
3 x 50 – 150
3 x 120 – 300
3 x 120 – 300
3 x 120 – 300
350
500
700
500
700
900
500
700
900
230 168
230 152
230 153
230 154
230 155
230 156
230 157
230 158
230 159
SIEV 6/3 16 – 70/350
SIEV 6/3 16 – 70/500
SIEV 6/3 16 – 70/700
SIEV 6/3 50 – 150/500
SIEV 6/3 50 – 150/700
SIEV 6/3 50 – 150/900
SIEV 6/3 120 – 300/500
SIEV 6/3 120 – 300/700
SIEV 6/3 120 – 300/900
Delivered set
– Spreader cap
– Stress control tubes
– Mastic
– Insulating tubes
– Earthing set
– Mounting instruction
20
Accessories
– Cable lugs
– Cleaning tissue type RT
– Cable cleaner type KR
– Abrasive cloth
GT Cable accessories up to 36 kV
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression cable lugs
3-CORE 3,6/6 kV
Terminations for 3-core polymeric-insulated cable
Application
– For connecting 3-core polymeric-insulated
cable with PVC, PE and XLPE insulation
– Indoor
6 kV 3-CORE
Advantages
– UV-resistant
– Very good electrical insulation
– Economical
– Easy mounting
Indoor-terminations for 3-core polymeric-insulated cable without outer conductive layer, armored
Number of cores x
Nominal cross-section
mm2
Dimensions
L
mm
Article
Number
Type
3 x 16 – 70
3 x 16 – 70
3 x 50 – 150
3 x 50 – 150
3 x 50 – 150
3 x 120 – 300
3 x 120 – 300
3 x 120 – 300
3 x 300 – 400
3 x 300 – 400
3 x 300 – 400
500
700
500
700
900
500
700
900
500
700
900
230 007
230 008
230 009
230 010
230 011
230 012
230 013
230 014
230 015
230 016
230 017
SIEVB 6/3 16 – 70/500
SIEVB 6/3 16 – 70/700
SIEVB 6/3 50 – 150/500
SIEVB 6/3 50 – 150/700
SIEVB 6/3 50 – 150/900
SIEVB 6/3 120 – 300/500
SIEVB 6/3 120 – 300/700
SIEVB 6/3 120 – 300/900
SIEVB 6/3 300 – 400/500
SIEVB 6/3 300 – 400/700
SIEVB 6/3 300 – 400/900
Delivered set
– Spreader cap
– Mastic
– Insulating tubes
– Earthing set
– Mounting instruction
Accessories
– Cable lugs
– Cleaning tissue type RT
– Cable cleaner type KR
– Abrasive cloth
Required ordering information
Voltage, cable type, conductor
material, cross-section On request
With compression cable lugs
GT Cable accessories up to 36 kV
21
1-CORE 6/10 kV
Straight-through joints for 1-core polymeric-insulated cable
Application
– For connecting 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers
– Applicable for compression ferrule
Advantages
– Wide cross-section area
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
10 kV 1- CORE
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers
Number of cores x
Nominal cross-section
Connector
ø max.
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25 – 70
1 x 95 – 185
1 x 240 – 300
1 x 400 – 500
1 x 625
18
28
34
44
52
600 x 45
650 x 55
700 x 65
750 x 75
800 x 80
242 104
242 105
242 106
242 153
242 154
Delivered set
– Outer joints
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Earthing set
– Mounting instruction
22
Remark
For cables with band screen
solderless earthing accessories are
delivered (indicate when ordering).
Accessories
– Compression ferrules
– Cable cleaner type KR
GT Cable accessories up to 36 kV
Type
SM 10/1 25 – 70
SM 10/1 95 – 185
SM 10/1 240 – 300
SM 10/1 400 – 500
SM 10/1 625
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression ferrules
Outer joint with sleeve
1-CORE 6/10 kV
Straight-through joints for 1-core polymeric-insulated cable with aluminium conductor
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with different conductive layers
– With Al-compression ferrule and screen wire compression ferrule
Advantages
– Wide cross-section area
– With connectors
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
Number of cores x
Nominal cross-section
Connector
ø max.
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25
1 x 35
1 x 50
1 x 70
1 x 95
1 x 120
1 x 150
1 x 185
1 x 240
1 x 300
1 x 400
1 x 500
1 x 625
12
14
16
18
22
22
25
28
32
34
38
44
52
600 x 40
600 x 40
600 x 45
600 x 45
650 x 50
650 x 50
650 x 50
650 x 55
700 x 60
700 x 65
750 x 70
750 x 75
800 x 80
242 112
242 115
242 120
242 125
242 130
242 135
242 140
242 145
242 155
242 161
242 165
242 170
242 175
Delivered set
– Outer joints
– Al-compression ferrule
– Screen wire-compression ferrule
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Earthing set
– Mounting instruction
Remark
For cables with band screen
solderless earthing accessories
are delivered (indicate when
ordering).
10 kV 1- CORE
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with Al-compression ferrule and screen wire-compression ferrule
Type
SM 10/1 25V – AL
SM 10/1 35V – AL
SM 10/1 50V – AL
SM 10/1 70V – AL
SM 10/1 95V – AL
SM 10/1 120V – AL
SM 10/1 150V – AL
SM 10/1 185V – AL
SM 10/1 240V – AL
SM 10/1 300V – AL
SM 10/1 400V – AL
SM 10/1 500V – AL
SM 10/1 625V – AL
Required ordering information
Voltage, cable type, conductor
material, cross-section On request
Outer joint with sleeve
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
23
1-CORE 6/10 kV
Straight-through joints for 1-core polymeric-insulated cable with copper conductor
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with different conductive layers
– With Cu-compression ferrule and screen wire-
compression ferrule
Advantages
– Wide cross-section area
– With connectors
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and chemical influences
10 kV 1- CORE
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with Cu-compression ferrule and screen wire-compression ferrule
Number of cores x
Nominal cross-section
Connector
ø max.
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25
1 x 35
1 x 50
1 x 70
1 x 95
1 x 120
1 x 150
1 x 185
1 x 240
1 x 300
1 x 400
1 x 500
1 x 625
10
12
14
16
18
20
22
25
28
32
38
42
44
600 x 40
600 x 40
600 x 45
600 x 45
650 x 50
650 x 50
650 x 50
650 x 55
700 x 60
700 x 65
750 x 70
750 x 75
800 x 80
242 113
242 116
242 121
242 126
242 131
242 136
242 141
242 146
242 156
242 162
242 166
242 171
242 176
Delivered set
– Outer joints
– Cu-compression ferrule
– Screen wire-compression ferrule
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Earthing set
– Mounting instruction
24
GT Cable accessories up to 36 kV
Remark
For cables with band screen
solderless earthing accessories
are delivered (indicate when
ordering).
Accessories
– Cable cleaner type KR
Type
SM 10/1 25V – Cu
SM 10/1 35V – Cu
SM 10/1 50V – Cu
SM 10/1 70V – Cu
SM 10/1 95V – Cu
SM 10/1 120V – Cu
SM 10/1 150V – Cu
SM 10/1 185V – Cu
SM 10/1 240V – Cu
SM 10/1 300V – Cu
SM 10/1 400V – Cu
SM 10/1 500V – Cu
SM 10/1 625V – Cu
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
Outer joint with sleeve
1-CORE 6/10 kV
Straight-through joints for 1-core polymeric insulated cable with Cu- or Al-conductor
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with different conductive layers
– With screw connector and screen wire screw connector
10 kV 1- CORE
Advantages
– Wide cross-section area
– With connectors
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths
and chemical influences
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with screw connector and screen wire-screw connector
Number of cores x
Nominal cross-section
Connector
ø max.
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25 – 95
1 x 35 – 150
1 x 95 – 240
1 x 150 – 300
1 x 240 – 400
1 x 500
1 x 500 – 625
1 x 625
24
28
33
37
42
50
52
50
600 x 50
700 x 55
700 x 60
700 x 65
700 x 70
800 x 80
800 x 80
800 x 80
242 103
242 107
242 114
242 117
242 157
242 158
242 159
242 163
Delivered set
– Outer joints
– Screw connector
– Screen wire-screw connector
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Earthing set
– Mounting instruction
Remark
For cables with band screen
solderless earthing accessories
are delivered (indicate when
ordering).
Type
SM 10/1 25 – 95 SV
SM 10/1 35 – 150 SV
SM 10/1 95 – 240 SV
SM 10/1 150 – 300 SV
SM 10/1 240 – 400 SV
SM 10/1 500 SV
SM 10/1 500 – 625 SV
SM 10/1 625 SV
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
Outer joint with sleeve
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
25
1-CORE 6/10 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
10 kV 1- CORE
Indoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen, unarmored
Number of cores x
Nominal cross-section
Dimensions
L
Article
Number
mm2
mm
Set = 3 pcs.
1 x 10 – 16
1 x 16 – 50
1 x 35 – 120
1 x 95 – 300
1 x 150 – 500
1 x 400 – 1000
340
350
360
390
450
490
231 099
231 100
231 200
231 300
231 400
231 450
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Mounting instruction
Remark
For cables with band screen
solderless earthing accessories
are delivered (indicate when
ordering).
Accessories
– Compression cable lugs
– Cable cleaner type KR
26
GT Cable accessories up to 36 kV
Type
SIEV 10/1 10 – 16
SIEV 10/1 16 – 50
SIEV 10/1 35 – 120
SIEV 10/1 95 – 300
SIEV 10/1 150 – 500
SIEV 10/1 400 – 1000
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression cable lugs
1-CORE 6/10 kV
Terminations for 1-core polymeric-insulated cable with Cu- or Al-conductor
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
– With screw cable lug and
screen wire-screw cable lug
Indoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen,
unarmored, with screw cable lug and screen wire-screw cable lug
Dimensions
L
Article
Number
mm2
mm
Set = 3 pcs.
1 x 25 – 95
1 x 70 – 150
1 x 95 – 240
1 x 185 – 400
380
380
400
420
231 210
231 220
231 310
231 410
Delivered set
– Stress control tubes
– Mastic
–Screw cable lug
–Screen wire-screw cable lug
– Insulating tubes
– Cleaning set
– Mounting instruction
Remark
For cables with band
screen solderless earthing
accessories are delivered
(indicate when ordering).
Type
SIEV 10/1 25 – 95 SR
SIEV 10/1 70 – 150 SR
SIEV 10/1 95 – 240 SR
SIEV 10/1 185 – 400 SR
10 kV 1- CORE
Number of cores x
Nominal cross-section
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
27
1-CORE 6/10 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
10 kV 1- CORE
Outdoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen, unarmored
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1 x 10 – 16
1 x 16 – 50
1 x 35 – 120
1 x 95 – 300
1 x 150 – 500
1 x 400 – 1000
400
410
430
450
450
540
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Screens
– Mounting instruction
28
Number of
screens
Article
Number
Type
Set = 3 pcs.
2
2
2
2
2
2
Remark
For cables with band
screen solderless earthing
accessories are delivered
(indicate when ordering).
Accessories
– Cable lugs
– Cable cleaner type KR
GT Cable accessories up to 36 kV
231 500
231 550
231 600
231 650
231 700
231 750
SFEV 10/1 10 – 16
SFEV 10/1 16 – 50
SFEV 10/1 35 – 120
SFEV 10/1 95 – 300
SFEV 10/1 150 – 500
SFEV 10/1 400 – 1000
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression cable lug
1-CORE 6/10 kV
Terminations for 1-core polymeric-insulated cable with Cu- or Al-conductor
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
– With screw cable lug and
screen wire-screw cable lug
Outdoor-terminations for 1-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen,
unarmored, with screw cable lug and screen wire-screw cable lug
Dimensions
L
mm2
mm
1 x 25 – 95
1 x 70 – 150
1 x 95 – 240
1 x 185 – 400
380
380
400
420
Delivered set
– Stress control tubes
– Mastic
– Screw cable lug
– Screen wire-screw cable lug
– Insulating tubes
– Cleaning set
– Screens
– Mounting instruction
Number of
screens
Article
Number
Type
Set = 3 pcs.
2
2
2
2
231 560
231 610
231 660
231 710
Remark
For cables with band
screen solderless earthing
accessories are delivered
(indicate when ordering).
10 kV 1- CORE
Number of cores x
Nominal cross-section
SFEV 10/1 25 – 95 SR
SFEV 10/1 70 – 150 SR
SFEV 10/1 95 – 240 SR
SFEV 10/1 185 – 400 SR
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
29
3-CORE 6/10 kV
Straight-through joints for 3-core polymeric-insulated cable
Application
– Suitable for connecting 3-core polymeric insulated cable (PE, XLPE, EPR) with
different conductive layers
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
10 kV 3- CORE
Straight-through joints for cables with wire screen per core, unarmored
Number of cores x
Nominal cross-section
mm2
Connector
max. Ø
mm
Dimensions
LxD
mm
Article
Number
Type
3 x 25 – 95
3 x 95 – 240
3 x 240 – 500
22
32
44
1300 x 90
1300 x 100
1400 x 115
241 000
241 050
241 100
SM 10/3 25 – 95
SM 10/3 95 – 240
SM 10/3 240 – 500
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Earthing set
– Cleaning set
– Mounting instruction
30
Remark
For cables with band
screen solderless earthing
accessories are delivered
(indicate when ordering).
Accessories
– Compression ferrule
– Cable cleaner type KR
GT Cable accessories up to 36 kV
Required ordering information
Voltage, cable type, conductor
material, cross-section,
band- or wire screen
On request
With compression ferrules
Outer joint with sleeve
3-CORE 6/10 kV
Straight-through joints for 3-core polymeric-insulated cable
Application
– Suitable for connecting 3-core polymeric insulated cable (PE, XLPE, EPR) with different conductive layers with common screen and armor
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
Number of cores x
Nominal cross-section
mm2
Connector
max. Ø
mm
Dimensions
LxD
mm
Article
Number
Set = 1 pc.
Type
3 x 25 – 95
3 x 95 – 240
3 x 240 – 500
22
32
44
1400 x 100
1400 x 115
1500 x 125
241 001
241 002
241 003
SMB 10/3 25 – 95
SMB 10/3 95 – 240
SMB 10/3 240 – 500
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Earthing set
– Cleaning set
– Mounting instruction
Remark
For cables with band
screen solderless earthing
accessories are delivered
(indicate when ordering).
Staight-through joints for
3-core belted cable 6/10 kV
on request.
10 kV 3- CORE
Straight-through joints for polymeric-insulated cable with common screen and armor
Required ordering information
Voltage, cable type, conductor
material, cross-section,
band- or wire screen
On request
With compression ferrules
Outer joint with sleeve
Accessories
– Compression ferrule
– Cable cleaner type KR
GT Cable accessories up to 36 kV
31
3-CORE 6/10 kV
Transition joints from 3-core belted cable to 3-core polymeric-insulated cable
Application
– Suitable for connecting 3-core belted cable
to 3-core polymeric-insulated cable
(PE, XLPE, EPR) with different conductive layers with single concentric screen without armor
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
10 kV 3- CORE
Transition joints from paper-insulated belted cable to 3-core polymeric-insulated cable,
with single concentric screen, unarmored
Number of cores x
Nominal cross-section
mm2
3 x 25 – 95
Connector
max. Ø
mm
22
Dimensions
LxD
mm
1700 x 100
Article
Number
Set = 1 pc.
241 011
Type
3 x 95 – 150
3 x 150 – 240
3 x 240 – 500
25
32
44
1700 x 110
1700 x 115
1800 x 125
241 013
241 010
241 012
SÜM 10/3/3 95 – 150
SÜM 10/3/3 150 – 240
SÜM 10/3/3 240 – 500
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Spreader cap
– Oil-barrier tubes
– Earthing set
– Cleaning set
– Mounting instruction
Remark
Connectors with oil stop have to be
used.
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Heat-shrink joints for TGL-cable
on request.
Accessories
– Compression ferrule
– Cable cleaner type KR
32
GT Cable accessories up to 36 kV
SÜM 10/3/3 25 – 95
Required ordering information
Voltage, cable types, conductor
material, cross-section,
band- or wire screen
On request
With compression ferrules with
oil stop
Outer joint with sleeve
3-CORE 6/10 kV
Transition joints from 3-core belted cable to 3 x 1-core polymeric insulated cable
Application
– Suitable for connecting 3-core
belted cable to 3 x 1-core polymeric insulated cable (PE, XLPE, EPR)
with different conductive layers
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
Transition joints from paper-insulated belted cable to 3 x 1-core polymeric-insulated cable
Connector
max. Ø
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 1 pc.
25 – 120
70 – 240
240 – 500
22
32
44
1200 x 100
1200 x 115
1300 x 125
241 025
241 017
241 018
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Spreader cap
– Oil-barrier tubes
– Earthing set
– Cleaning set
– Mounting instruction
Remark
Connectors with oil stop have to be
used.
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Heat-shrink joints for TGL-cable
on request.
Type
10 kV 3- CORE
Number of cores x
Nominal cross-section
SÜM 10/3/1 25 – 120
SÜM 10/3/1 70 – 240
SÜM 10/3/1 240 – 500
Required ordering information
Voltage, cable types, conductor
material, cross-section,
band- or wire screen
On request
With compression ferrules with
oil stop
Outer joint with sleeve
Accessories
– Compression ferrule
– Cable cleaner type KR
GT Cable accessories up to 36 kV
33
3-CORE 6/10 kV
Spreading joints from 3-core polymeric-insulated cable to
3 x 1-core polymeric-insulated cable
Application
– Suitable for connecting 3-core polymeric insulated cable to 3 x 1-core polymeric-
insulated cable (PE, XLPE, EPR) with
different conductive layers.
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
10 kV 3- CORE
Spreading joints from 3-core to 3 x 1-core polymeric-insulated cable
Number of cores x
Nominal cross-section
mm2
Connector
max. Ø
mm
Dimensions
LxD
mm
Article
Number
Set = 1 pc.
Type
3 x 25 – 95
3 x 50 – 120
3 x 95 – 240
3 x 240 – 500
22
22
32
44
1200
1200
1200
1200
241 020
241 024
241 030
241 040
SAM 10/3/1 25 – 95
SAM 10/3/1 50 – 120
SAM 10/3/1 95 – 240
SAM 10/3/1 240 – 500
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Earthing set
– Cleaning set
– Mounting instruction
x
x
x
x
85
100
110
130
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Required ordering information
Voltage, cable types, conductor
material, cross-section,
band- or wire-screen
Heat-shrink joints for TGL-cable
on request.
On request
With compression ferrules
Outer joint with sleeve
Accessories
– Compression ferrule
– Cable cleaner type KR
34
GT Cable accessories up to 36 kV
3-CORE 6/10 kV
Terminations for 3-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
Number of cores x
Nominal cross-section
mm2
Dimensions
L
mm
Article
Number
Set = 1 pc.
Type
3 x 16 – 50
3 x 16 – 50
3 x 16 – 50
3 x 35 – 95
3 x 35 – 95
3 x 35 – 95
3 x 95 – 300
3 x 95 – 300
3 x 95 – 300
3 x 240 – 500
3 x 240 – 500
3 x 240 – 500
500
700
900
500
700
900
500
700
900
500
700
900
233 100
233 101
233 102
233 200
233 201
233 202
233 300
233 301
233 302
233 400
233 401
233 402
SIEV 10/3 16 – 50/500
SIEV 10/3 16 – 50/700
SIEV 10/3 16 – 50/900
SIEV 10/3 35 – 95/500
SIEV 10/3 35 – 95/700
SIEV 10/3 35 – 95/900
SIEV 10/3 95 – 300/500
SIEV 10/3 95 – 300/700
SIEV 10/3 95 – 300/900
SIEV 10/3 240 – 500/500
SIEV 10/3 240 – 500/700
SIEV 10/3 240 – 500/900
Delivered set
– Spreader cap
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Mounting instruction
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section,
band- or wire screen
Accessories
– Compression cable lugs
– Cable cleaner type KR
On request
With compression cable lugs
GT Cable accessories up to 36 kV
10 kV 3- CORE
Indoor-terminations for 3-core polymeric-insulated cable, (PE, XLPE, EPR) with wire screen and different
conductive layers, unarmored
35
3-CORE 6/10 kV
Terminations for 3-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
10 kV 3- CORE
Outdoor-terminations for 3-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, unarmored
Number of cores x
Nominal cross-section
mm2
Dimensions
L
mm
Article
Number
Set = 1 pc.
Type
3 x 16 – 50
3 x 16 – 50
3 x 16 – 50
3 x 35 – 95
3 x 35 – 95
3 x 35 – 95
3 x 95 – 300
3 x 95 – 300
3 x 95 – 300
3 x 240 – 500
3 x 240 – 500
3 x 240 – 500
500
700
900
500
700
900
700
900
1200
700
900
1200
233 750
233 751
233 752
233 500
233 501
233 502
233 600
233 601
233 602
233 700
233 701
233 702
SFEV 10/3 16 – 50/500
SFEV 10/3 16 – 50/700
SFEV 10/3 16 – 50/900
SFEV 10/3 35 – 95/500
SFEV 10/3 35 – 95/700
SFEV 10/3 35 – 95/900
SFEV 10/3 95 – 300/700
SFEV 10/3 95 – 300/900
SFEV 10/3 95 – 300/1200
SFEV 10/3 240 – 500/700
SFEV 10/3 240 – 500/900
SFEV 10/3 240 – 500/1200
Delivered set
– Spreader cap
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Cleaning set
– Mounting instruction
36
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section,
band- or wire screen
Accessories
– Compression cable lugs
– Cable cleaner type KR
On request
With compression cable lugs
GT Cable accessories up to 36 kV
1-CORE 12/20 kV
Straight-through joints for 1-core polymeric-insulated cable
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with wire screen and different conductive layers
– Applicable for compression ferrule
– Indoor
– Ground
– Water
– Ducts
20 kV 1- CORE
Advantages
– Wide cross-section area
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers
Number of cores x
Nominal cross-section
Connector
ø max.
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25 – 70
1 x 35 – 120
1 x 95 – 240
1 x 300 – 500
1 x 625 – 800
18
22
32
44
58
650 x 50
700 x 55
700 x 60
800 x 75
800 x 85
242 301
242 351
242 401
242 451
242 457
Delivered set
– Outer joints
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Earthing set
– Mounting instruction
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Accessories
– Compression ferrule
– Cable cleaner type KR
Type
SM 20/1 25 – 70
SM 20/1 35 – 120
SM 20/1 95 – 240
SM 20/1 300 – 500
SM 20/1 625 – 800
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression ferrules
Outer joint with sleeve
GT Cable accessories up to 36 kV
37
1-CORE 12/20 kV
Straight-through joints for 1-core polymeric-insulated cable with aluminium conductor
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with wire screen and different conductive layers
– With Al-compression ferrule and screen wire compression ferrule
Advantages
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
20 kV 1- CORE
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with Al-compression ferrule and screen wire-compression ferrule
Number of cores x
Nominal cross-section
Connector
max. Ø
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25
1 x 35
1 x 50
1 x 70
1 x 95
1 x 120
1 x 150
1 x 185
1 x 240
1 x 300
1 x 400
1 x 500
1 x 630
1 x 800
12
14
16
18
22
22
25
28
32
34
38
44
52
58
650 x 45
650 x 45
650 x 50
650 x 50
700 x 55
700 x 55
700 x 55
700 x 60
700 x 60
800 x 65
800 x 70
800 x 75
800 x 80
800 x 85
242 310
242 320
242 330
242 340
242 361
242 370
243 380
242 390
242 414
242 421
242 430
242 440
242 461
242 470
Delivered set
– Outer joints
– Stress control tubes
– Mastic
– Insulating tubes
– Al-compression ferrule
– Screen wire-compression ferrule
– Cleaning set
– Earthing set
– Mounting instruction
38
Type
SM 20/1 25 V – Al
SM 20/1 35 V – Al
SM 20/1 50 V – Al
SM 20/1 70 V – Al
SM 20/1 95 V – Al
SM 20/1 120 V – Al
SM 20/1 150 V – Al
SM 20/1 185 V – Al
SM 20/1 240 V – Al
SM 20/1 300 V – Al
SM 20/1 400 V – Al
SM 20/1 500 V – Al
SM 20/1 630 V – Al
SM 20/1 800 V – Al
Remark
For cables with band screen solderless
earthing accessories are delivered
(indicate when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Cable cleaner type KR
On request
Outer joint with sleeve
GT Cable accessories up to 36 kV
1-CORE 12/20 kV
Straight-through joints for 1-core polymeric-insulated cable with copper conductor
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with wire screen and different conductive layers
– With Cu-compression ferrule and screen wire compression ferrule
Advantages
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with Cu-compression ferrule and screen wire-compression ferrule
Number of cores x
Nominal cross-section
Connector
max. Ø
mm2
mm
mm
Set = 3 pcs.
1 x 25
1 x 35
1 x 50
1 x 70
1 x 95
1 x 120
1 x 150
1 x 185
1 x 240
1 x 300
1 x 400
1 x 500
1 x 630
1 x 800
10
12
14
16
18
20
22
25
28
32
38
42
44
49
650 x 40
650 x 40
650 x 45
650 x 50
700 x 50
700 x 50
700 x 55
700 x 55
700 x 60
800 x 60
800 x 65
800 x 70
800 x 75
1000 x 90
242 311
242 321
242 331
242 341
242 362
242 371
243 381
242 391
242 415
242 423
242 431
242 441
242 462
242 471
Delivered set
– Outer joints
– Stress control tubes
– Mastic
– Insulating tubes
– Cu-compression ferrule
– Screen wire-compression ferrule
– Cleaning set
– Earthing set
– Mounting instruction
Article
Number
Type
20 kV 1- CORE
Dimensions
LxD
SM 20/1 25 V – Cu
SM 20/1 35 V – Cu
SM 20/1 50 V – Cu
SM 20/1 70 V – Cu
SM 20/1 95 V – Cu
SM 20/1 120 V – Cu
SM 20/1 150 V – Cu
SM 20/1 185 V – Cu
SM 20/1 240 V – Cu
SM 20/1 300 V – Cu
SM 20/1 400 V – Cu
SM 20/1 500 V – Cu
SM 20/1 630 V – Cu
SM 20/1 800 V – Cu
Remark
For cables with band screen solderless
earthing accessories are delivered
(indicate when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Cable cleaner type KR
On request
Outer joint with sleeve
GT Cable accessories up to 36 kV
39
1-CORE 12/20 kV
Straight-through joints for 1-core polymeric-insulated cable with Cu- or Al-conductor
Application
– For connecting 1-core polymeric-insulated cable
(PE, XLPE, EPR) with wire screen and different conductive layers
– With screw connector and screen wire screw connector
20 kV 1- CORE
Advantages
– Wide cross-section area
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with screw connector and screen wire-screw connector
Number of cores x
Nominal cross-section
Connector
max. Ø
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 25 – 95
1 x 35 – 150
1 x 95 – 240
1 x 150 – 300
1 x 300 – 400
1 x 500
1 x 625
24
28
33
37
42
50
50
700 x 55
700 x 60
700 x 65
700 x 70
800 x 75
800 x 80
800 x 80
242 352
242 353
242 402
242 403
242 404
242 405
243 406
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Screw connector
– Screen wire-screw connector
– Cleaning set
– Earthing set
– Mounting instruction
40
Type
SM 20/1 25 – 95 – SV
SM 20/1 35 – 150 – SV
SM 20/1 95 – 240 – SV
SM 20/1 150 – 300 – SV
SM 20/1 300 – 400 – SV
SM 20/1 500 – SV
SM 20/1 625 – SV
Remark
For cables with band screen solderless earthing accessories are delivered (indicate when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Cable cleaner type KR
On request
Outer joint with sleeve
GT Cable accessories up to 36 kV
1-CORE 12/20 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers
Dimensions
L
mm2
mm
1 x 16 – 50
1 x 25 – 95
1 x 70 – 240
1 x 120 – 400
1 x 300 – 800
1 x 500 – 1000
390
410
430
480
540
540
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Cleaning set
– Mounting instruction
Number of
screens
Article
Number
Type
Set = 3 pcs.
1
1
1
1
1
1
232 010
232 000
232 100
232 150
232 200
232 250
SIEV 20/1 16 – 50
SIEV 20/1 25 – 95
SIEV 20/1 70 – 240
SIEV 20/1 120 – 400
SIEV 20/1 300 – 800
SIEV 20/1 500 – 1000
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Compression cable lugs
– Cable cleaner type KR
On request
With compression cable lugs
GT Cable accessories up to 36 kV
20 kV 1- CORE
Number of cores x
Nominal cross-section
41
1-CORE 12/20 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
– With screw cable lug and screen wire screw cable lug
Advantages
– Wide cross-section area
– UV-resistant
20 kV 1- CORE
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers, with screw cable lug and screen wire-screw cable lug
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1 x 25 – 95
1 x 35 – 150
1 x 95 – 240
1 x 300 – 400
470
470
490
510
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Screw cable lug
– Screen wire-screw
cable lug
– Cleaning set
– Mounting instruction
42
Number of
screens
Article
Number
Type
Set = 3 pcs.
1
1
1
1
232 020
232 110
232 160
232 170
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
SIEV 20/1 25 – 95 SR
SIEV 20/1 35 – 150 SR
SIEV 20/1 95 – 240 SR
SIEV 20/1 300 – 400 SR
Required ordering information
Voltage, cable type, conductor
material, cross-section
1-CORE 12/20 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
Outdoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and different
conductive layers
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1 x 16 – 50
1 x 25 – 95
1 x 70 – 240
1 x 120 – 400
1 x 300 – 800
470
480
490
510
510 x 135
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Cleaning set
– Mounting instruction
Number of
screens
Article
Number
Type
3
3
3
3
3
232 600
232 650
232 700
232 750
232 800
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Accessories
– Compression cable lugs
– Cable cleaner type KR
20 kV 1- CORE
Set = 3 pcs.
SFEV 20/1 16 – 50
SFEV 20/1 25 – 95
SFEV 20/1 70 – 240
SFEV 20/1 120 – 400
SFEV 20/1 300 – 800
Required ordering information
Voltage, cable type, conductor
material, cross-section
On request
With compression cable lugs
GT Cable accessories up to 36 kV
43
1-CORE 12/20 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
– With screw cable lug and screen wire screw cable lug
Advantages
– Wide cross-section area
– UV-resistant
20 kV 1- CORE
Outdoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers, with screw cable lug and screen wire-screw cable lug
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1 x 25 – 95
1 x 35 – 150
1 x 95 – 240
1 x 300 – 400
470
470
490
510
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Screw cable lug
– Screen wire screw cable lug
– Cleaning set
– Mounting instruction
44
Number of
screens
Article
Number
Type
Set = 3 pcs.
3
3
3
3
232 610
232 660
232 710
232 760
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
SFEV 20/1 25 – 95 SR
SFEV 20/1 35 – 150 SR
SFEV 20/1 95 – 240 SR
SFEV 20/1 300 – 400 SR
Required ordering information
Voltage, cable type, conductor
material, cross-section
1-CORE 12/20 kV
Spreading joints from 3-core to 3 x 1-core polymeric-insulated cable
Application
– Suitable for connecting 3-core polymeric insulated cable to 3 x 1-core polymeric insulated cable (PE, XLPE, EPR) with different conductive layers
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
Number of cores x
Nominal cross-section
mm2
Connector
max. Ø
mm
Dimensions
LxD
mm
Article
Number
Set = 1 pc.
Type
3 x 25 – 50
3 x 50 – 120
3 x 120 – 300
3 x 300 – 630
16
22
34
52
1200
1200
1200
1200
242 411
242 412
242 410
242 413
SAM 20/3/1 25 – 50
SAM 20/3/1 50 – 120
SAM 20/3/1 120 – 300
SAM 20/3/1 300 – 630
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Earthing set
– Cleaning set
– Mounting instruction
x
x
x
x
85
100
110
130
Remark
For cables with band screen solderless earthing accessories are
delivered (indicate when ordering).
Required ordering information
Voltage, cable types, conductor
material, cross-section,
band- or wire screen
Accessories
– Compression ferrule
– Cable cleaner type KR
On request
With compression ferrules
Outer joint with sleeve
GT Cable accessories up to 36 kV
20 kV 3- CORE
Spreading joints from 3-core to 3 x 1-core polymeric-insulated cable
45
1-CORE 12/20 kV
Transition joints from 3-lead sheath cable to 3 x 1-core polymeric-insulated cable
Application
– S uitable for connecting 3-lead sheath cable
to 3 x 1-core polymeric-insulated cable (PE,
XLPE, EPR) with different conductive layers
20 kV 3-CORE
Advantages
– High resistance against electrical,
mechanical and chemical agents
– Wide cross-section area
– UV-resistant
Transition joints from 3-lead sheath cable to 3 x 1-core polymeric-insulated cable
Number of cores x
Nominal cross-section
mm2
Connector
max. Ø
mm
Dimensions
LxD
mm
Article
Number
Set = 1 pc.
Type
3 x 16 – 50
3 x 50 – 120
3 x 120 – 300
16
22
34
1400 x 85
1400 x 100
1400 x 110
242 368
242 365
242 366
SÜMD 20/3/1 16 – 50
SÜMD 20/3/1 50 – 120
SÜMD 20/3/1 120 – 300
Delivered set
– Outer joint
– Stress control tubes
– Oil-barrier tubes
– Pressure tubes
– Mastic
– Insulating tubes
– Sealing set
– Earthing set
– Cleaning set
– Mounting instruction
46
GT Cable accessories up to 36 kV
Remark
For cables with band screen
solderless earthing accessories are delivered (indicate
when ordering).
Required ordering information
Voltage, cable types, conductor
material, cross-section,
band- or wire screen
Accessories
– Compression ferrule
– Cable cleaner type KR
On request
With compression ferrules
Outer joint with sleeve
1-CORE 18/30 kV
Straight-through joints for 1-core polymeric-insulated cable
Application
– For connecting 1-core polymeric-insulated
cable (PE, XLPE, EPR) with wire screen
and different conductive layers
– Applicable for compression ferrule
30 kV 1–CORE
Advantages
– Wide cross-section area
– Cross-waterproof
– UV-resistant
– Good resistance against alkaline earths and
chemical influences
Straight-through joints for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers
Number of cores x
Nominal cross-section
Connector
max. Ø
Dimensions
LxD
Article
Number
mm2
mm
mm
Set = 3 pcs.
1 x 50 – 150
1 x 150 – 300
1 x 240 – 630
25
34
52
800 x 90
800 x 90
900 x 110
242 500
242 550
242 600
Delivered set
– Outer joint
– Stress control tubes
– Mastic
– Insulating tubes
– Cleaning set
– Earthing set
– Mounting instruction
Type
SM 30/1 50 – 150
SM 30/1 150 – 300
SM 30/1 240 – 630
Remark
For cables with band screen
solderless earthing accessories are delivered (indicate
when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Compression ferrule
– Cable cleaner type KR
On request
With compression ferrules
Outer joint with sleeve
GT Cable accessories up to 36 kV
47
1-CORE 18/30 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
Advantages
– Wide cross-section area
– UV-resistant
30 kV 1-CORE
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1 x 25 – 50
1 x 50 – 120
1 x 95 – 240
1 x 185 – 630
1 x 400 – 1000
490
510
530
610
640
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Cleaning set
– Mounting instruction
48
Number of
screens
Article
Number
Type
Set = 3 pcs.
2
2
2
2
2
232 300
232 350
232 400
232 450
232 500
SIEV 30/1 25 – 50
SIEV 30/1 50 – 120
SIEV 30/1 95 – 240
SIEV 30/1 185 – 630
SIEV 30/1 400 – 1000
Remark
For cables with band screen
solderless earthing accessories are delivered (indicate
when ordering).
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Compression cable lugs
– Cable cleaner type KR
On request
With compression cable lugs
GT Cable accessories up to 36 kV
1-CORE 18/30 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
– With screw cable lug and screen wire screw cable lug
Advantages
– Wide cross-section area
– UV-resistant
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1 x 35 – 95
1 x 35 – 150
1 x 95 – 240
1 x 185 – 400
480
500
530
550
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screw cable lug
– Screen wire screw cable lug
– Screens
– Cleaning set
– Mounting instruction
Number of
screens
Article
Number
30 kV 1–CORE
Indoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers, with screw cable lug and screen wire-screw cable lug
Type
Set = 3 pcs.
2
2
2
2
Remark
For cables with band screen
solderless earthing accessories are delivered (indicate
when ordering).
232 360
232 410
232 420
232 460
SIEV 30/1 35 – 95 SR
SIEV 30/1 35 – 150 SR
SIEV 30/1 95 – 240 SR
SIEV 30/1 185 – 400 SR
Required ordering information
Voltage, cable type, conductor
material, cross-section
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
49
1-CORE 18/30 kV
Terminations for 1-core polymeric-insulated cable
Application
– The terminations are used for connecting
unarmored polymeric-insulated cables
– With screw cable lug and screen wire screw cable lug
Advantages
– Wide cross-section area
– UV-resistant
30 kV 1-CORE
Outdoor-terminations for 1-core polymeric-insulated cable (PE, XLPE, EPR) with wire screen and
different conductive layers, with screw cable lug and screen wire-screw cable lug
Number of cores x
Nominal cross-section
Dimensions
L
mm2
mm
1
1
1
1
630
630
650
670
x
x
x
x
35 – 95
35 – 150
95 – 240
185 – 400
Delivered set
– Stress control tubes
– Mastic
– Insulating tubes
– Screens
– Screw cable lug
– Screen wire screw cable lug
– Cleaning set
– Mounting instruction
50
Number of
screens
Article
Number
Type
Set = 3 pcs.
4
4
4
4
232 905
232 915
232 925
232 935
Remark
For cables with band screen
solderless earthing accessories are delivered (indicate
when ordering).
Accessories
– Cable cleaner type KR
GT Cable accessories up to 36 kV
SFEV
SFEV
SFEV
SFEV
30/1
30/1
30/1
30/1
35 – 95 SR
35 – 150 SR
95 – 240 SR
185 – 400 SR
Required ordering information
Voltage, cable type, conductor
material, cross-section
UP TO 30 kV
Heat-shrinking tubes for bus bar insulation up to 30 kV
Application
– Track-resistant, flexible and weather-proof
heat-shrinking tube for bus bar insulation
in switching and transformer stations
Advantages
– Wide application range
– UV-resistant
– Temperature range – 50°C up to +100 °C
– Dielectric strength >14 kV
– Colour: red
– Halogen-free
– Elongation after free shrinking
0 % up to –10 %
– Spool à 15 m
Heat-shrinking tubes for bus bar insulation
Application range
Application range
R = min. 0,8 m m
Wall thickness
after free shrinking
Article
Number
Type
220 010
220 020
220 030
220 050
SST
SST
SST
SST
a
13 – 25
27 – 45
45 – 75
73 – 120
ø min. – max.
mm
11 – 20
17 – 32
26 – 52
45 – 80
BUS BARS
d
b
a+b
min. – max.
mm
mm
3,0
3,0
3,0
3,0
25 – 10B
40 – 16B
65 – 25B
100 – 40B
Other dimensions on request
GT Cable accessories up to 36 kV
51
UP TO 30 kV
Heat-shrinking tape for bus bar insulation
Application
– Track-resistant, flexible and weather-proof
heat-shrinking tape for bus bar insulation
in switching and transformer stations
Advantages
– UV-resistant
– Dielectric strength >14 kV
– Colour: red
– Halogen-free
– With hotmelt adhesive
– Wall thickness W = 1 mm
– Spool à 10 m
Heat-shrinking tape for bus bar insulation
Application range
Application range
R = min. 0,8 m m
Dimensions
BxL
Article
Number
Type
221 000
221 001
SSLB 25
SSLB 50
a
d
b
a+b
min. – max.
mm
BUS BARS
10 – 60
40 – 130
52
ø min. – max.
mm
8 – 40
30 – 80
GT Cable accessories up to 36 kV
mm
25 x 10000
50 x 10000
UP TO 30 kV
Track-resistant insulating tube
Application
– Universal application for insulation
up to 36 kV
Advantages
– UV-resistant
– Halogen-free
– Temperature range: - 30°C up to +110 °C
– Semi-flexible
– High tensile strength
– Colour: red
– Standard length 1000 mm or spools à 15 m
– Very good electrical characteristics
– Non-corrosive
Shrinkage
D ø D *
mm
Length
Article
Number
Type
mm
Wall thickness
W *
mm
20 – 7
30 – 10
36 – 12
45 – 18
54 – 25
60 – 30
76 – 40
100 – 50
1000
1000
1000
1000
1000
1000
1000
1000
2,5
2,8
2,8
3,0
3,0
3,0
3,0
3,0
220 101
220 201
220 301
220 403
220 502
220 601
220 701
220 801
SSKF 20 – 7/1000
SSKF 30 – 10/1000
SSKF 36 – 12/1000
SSKF 45 – 18/1000
SSKF 54 – 25/1000
SSKF 60 – 30/1000
SSKF 76 – 40/1000
SSKF 100 – 50/1000
HEAT-SHRINKING TUBES
Track-resistant heat-shrinking tubes – type SSKF
Track-resistant heat-shrinking tubes – type SSKF on spool à 15 m
Shrinkage
D ø D *
Spool
à 15 m
Wall thickness
W *
mm
mm
20 – 7
30 – 10
36 – 12
45 – 18
54 – 25
60 – 30
76 – 40
100 – 50
2,5
2,8
2,8
3,0
3,0
3,0
3,0
3,0
Article
Number
Type
220 102
220 202
220 302
220 404
220 504
220 602
220 702
220 802
SSKF 20 – 7B
SSKF 30 – 10B
SSKF 36 – 12B
SSKF 45 – 18B
SSKF 54 – 25B
SSKF 60 – 30B
SSKF 76 – 40B
SSKF 100 – 50B
GT Cable accessories up to 36 kV
53
UP TO 20 kV
Track-resistant insulating mold parts
Application
– Track-resistant, flexible and weather proof mold part for insulating e. g.
motor connections
Advantages
– UV-resistant
– Temperature range – 50°C up to +105 °C
– Dielectric strength >13 kV
– Colour: red
– Halogen-free
– Coated with hotmelt adhesive
– Wall thickness 4 mm
Mold PARTS
Track-resistant insulating mold parts
Dimensions
Dimensions
Dimensions
D – D *
E – E *
LxH
mm
mm
mm
100 – 32
130 – 60
145 – 60
50 – 25
60 – 30
60 – 30
110 x 135
150 x 155
150 x 155
Adhesive coating
54
GT Cable accessories up to 36 kV
Article
Number
Type
210 025
210 026
210 027
SIR 1
SIR 2
SIR 3
Mold PARTS
up to 20 kV
GT Cable accessories up to 36 kV
55
EleCtro-TAPES
Electro-tapes
by GT
56
GT Cable accessories up to 36 kV
HV-EleCtro-TAPES
High voltage-splice tape no. 40
Application
– Usable for conductor insulation up to 69 kV
Advantages
– UV-resistant
– Good electrical and
physical characteristics
– High resistance to weathering
– Quick welding to a homogeneous mass
– With protective film
Splice tape no. 40
Thickness
mm
Width
mm
Length
m
Colour
Article
Number
Type
0,76
19
9,1
black
300 039
No. 40
Characteristics
Value
Continuous operating temperature
Short-time
Elongation at break
Tensile strength
Corrosion
Water absorption
Flammability
UV-resistance
Ozone resistance
Dielectric constant
Volume resistivity
+ 90 °C
+ 130 °C
750%
2,0 N/mm 2
none
0,06 %
EPR
passed
passed
2,7
10 16 Ω ∙ cm
EleCtro-TAPES
Technical data
GT Cable accessories up to 36 kV
57
HV-EleCtro-TAPES High voltage-insulation tape no. 30
Application
– For installation of terminations and for
bus bar insulation
Advantages
– UV-resistant
– Good electrical characteristics
– High resistance to corrosion and chemical influences
High voltage-insulation tape no. 30
Thickness
mm
Width
mm
Colour
Length
m
Article
Number
Type
0,8
19
black
9,1
300 038
No. 30
EleCtro-TAPES
Technical data
58
Characteristics
Value
Continuous operating temperature
Short-time
+ 90°C
+ 100 °C
Elongation at break
Tensile strength
Corrosion
Water absorption
Flammability
UV-resistance
Ozone resistance
Dielectric strength
Dielectric constant
Dissipation factor
Volume resistivity
200 %
3,0 N/mm2
none
0,06 %
EPR
passed
passed
> 36 kV/mm
2,9
–
10 16 Ω ∙ cm
GT Cable accessories up to 36 kV
HV-EleCtro-TAPES
Semi-conducting tape no. 50
Application
– For smoothing of extruded semi-conductive
layersand for equalizing rough parts on
connectors and cable lugs
– In order to avoid confusion, the tape is labelled with printed protective paper
Advantages
– Very good electrical and mechanical
characteristics
– Highly elastic
– Basic material EPR
– UV-resistant
Colour: black
Semi-conducting tape no. 50
Width
mm
Length
m
Colour
Article
Number
Type
0,76
19
4,6
black
300 040
No. 50
EleCtro-TAPES
Thickness
mm
Technical data
Characteristics
Value
Continuous operating temperature
Short-time
Elongation at break
Tensile strength
Corrosion
Water absorption
Flammability
Volume resistivity
+ 90 °C
+ 130 °C
500 %
3,0 N/mm2
none
0,02 %
flammable
10 4 Ω ∙ cm
GT Cable accessories up to 36 kV
59
EleCtro-TAPES
Sealing tapes
Application
– When warming-up, the tape flows and reaches
good adhesive- and sealing properties
nschaften
Farbe
Artikelnummer
rot
rot
300 048
300 049
VPE
Stück
1
1
Typ
MHB
MHB
Sealing tape type MHB
Thickness
mm
Width
mm
Length
mm
Colour
Article
Number
Type
0,8
25
500
red
300 048
MHB
asst sich
EleCtro-TAPES
Sealing tape type MCM
Farbe
Artikelnummer
schwarz
300 050
VPE
Stück
1
Typ
MCM
Application
– When warming-up, the tape flows and is
under pressure self-fitting to the surfaces
und
aften auf
Sealing tape type MCM
Thickness
mm
Width
mm
Length
mm
Colour
Article
Number
Type
3,0
38
500
black
300 050
MCM
Farbe
Artikelnummer
gelb
160 005
60
VPE
Stück
1
GT Cable accessories up to 36 kV
Typ
HB
EleCtro-TAPES
Hotmelt adhesive tape
Application
– When warming-up, the adhesive tape flows and
reaches good adhesive- and sealing properties on metals and plastics
Hotmelt adhesive tape type HB
Width
mm
Length
m
Colour
Article
Number
Type
0,7
25
1,8
yellow
160 005
HB
EleCtro-TAPES
Thickness
mm
GT Cable accessories up to 36 kV
61
EleCtro-TAPES
Cable insulation compound no. 35
Application
– A tape made of butyl-caoutchouc for filling,
sealing, molding and bedding
– Adhesion surfaces must be clean, dry, sound and
free from dust and release agents
Advantages
– Ageing resistance
– Self-amalgamating
– High corrosion resistance
– UV-resistant
– Permanently elastic
– Solvent-free
– Resistance against fats and many solvents
– High adhesion to metal, plastic, glass and rubber
Colour: black
EleCtro-TAPES
Insulation compound no. 35
Thickness
mm
Width
mm
Length
m
Colour
Article
Number
Type
3,0
38
1,5
black
300 035
No. 35
Technical data
62
Characteristics
Value
Operating temperature
Specific gravity
Service temperature
Ignition temperature
Shore hardness 00 scale
Solids content
Volume resistivity
+ 5 ° up to + 30 °C
ca. 1,2 g/cm3
- 50 ° up to +100 °C
> 440 °C
ca. 55
> 99 %
2,4 ∙ 1013 Ω ∙ cm
GT Cable accessories up to 36 kV
EleCtro-TAPES
Glass fabric reinforced tape no. 70
Application
– For short-circuit-proof bundling of cores
and cables
– Also usable as protective wrapping against
heat energy
Advantages
– High tensile-strength
– Very good abrasion resistance
– Self-adhesive
– Cross-linked by heat
Colour: white
Glass fabric reinforced tape no. 70
Thickness
mm
Width
mm
Length
m
Colour
Article
Number
Type
0,18
19
20
white
300 041
No. 70
Characteristics
Value
Continuous operating temperature
Tensile strength
Corrosion
Water absorption
UV-resistance
Ozone resistance
Dielectric strength
Volume resistivity
+ 130 °C
275 N/mm2
none
0,1 %
passed
passed
2,5 kV/mm
10 13 Ω ∙ cm
EleCtro-TAPES
Technical data
GT Cable accessories up to 36 kV
63
EleCtro-TAPES
Copper braid tape no. 60
Application
– For connecting of earthings
and shieldings
Colour: silver
Advantages
– Highly flexible
– Tin-plated
– Made of braided copper wires
– Break-proofed
– In tube-form
Copper braid tape no. 60
Thickness
mm
Width
mm
Length
m
Colour
Article
Number
Type
1,0
60
7,0
silver
160 016
No. 60
Copper braid tube no. 61
EleCtro-TAPES
Application
– For connecting of earthings
and shieldings
Advantages
– Highly flexible
– Tin-plated
– Made of braided copper wires
– In tube-form
Colour: silver
Copper braid tube no. 61
64
Cross-section
mm2
Colour
Article
Number
Type
16
35
50
silver
silver
silver
300 051
300 052
300 053
No. 61
No. 61
No. 61
GT Cable accessories up to 36 kV
EleCtro-TAPES
EleCtro-TAPES
GT Cable accessories up to 36 kV
65
MOUNTING TECHNIQUE
Mounting Technique
by GT
66
GT Cable accessories up to 36 kV
MOUNTING TECHNIQUE
Constant force springs
Application
– Applicable for heat-shrink and cast resin joints
Advantages
– Solderless shielding- and armoring connection
– Easy mounting
– Constant contact pressure
– Non-corrosive
Constant force springs
Width
mm
Article
Number
Type
9 – 15
13 – 22
17 – 28
23 – 39
32 – 49
44 – 70
58 – 92
16
16
16
16
16
20
20
160 009
160 010
160 011
160 012
160 013
160 014
160 015
RFS 0
RFS 1
RFS 2
RFS 3
RFS 4
RFS 5
RFS 6
MOUNTING TECHNIQUE
For cable
ø mm
Remark: Constant force springs are not current-carrying elements.
GT Cable accessories up to 36 kV
67
MOUNTING ASSISTANCE
Mounting Assistance
by GT
68
GT Cable accessories up to 36 kV
MOUNTING ASSISTANCE
Cleaning tissue
Application
– For cleaning insulation,
drenched in isopropyl alcohol
Advantages
– Effective
– Practical
Cleaning tissue
Article Number
Type
160 006
RT
Cable cleaning agent
Application
– For cleaning insulation
Advantages
– Halogen-free
– Good biologically decompostable
– Comfortable in canisters
– Flashpoint 60 °C
Content l
Article Number
Type
2
10
160 007
160 008
KR 2
KR 10
MOUNTING ASSISTANCE
Cable cleaning agent
Cable lubricant gel
Application
– Reduces frictional resistance
between protecting pipe and cable jacket
Cable lubricant gel
Advantages
– Avoids damages of cable jackets
– Applicable for fibre optics
– High slipping properties also at low temperatures
– 100 % biologically decompostable
– Hydrocarbon-free
– Minimum 2 years storage life
– Dilutable with water
Colour
Content l
Article Number
Type
blue
blue
2
20
160 017.2
160 017.20
KG 2
KG 20
Other packages on request.
GT Cable accessories up to 36 kV
69
CONNECTING
TECHNIQUE
Connecting
Technique by GT
70
GT Cable accessories up to 36 kV
CONNECTING
TECHNIQUE
Screw connectors with 2, 4 or 6 shear-off head bolts
Advantages
– Tin-plated
– Aluminium alloy
– Screws: brass, tin-plated
– Surface of connection body: tin-plated
– Centre rings are parts of the connectors
Screw connectors with shear-off head bolts
Cross-section
mm2
Nos.
Heads
Size
L1
Size
D2
Size
D1
Size
L2
Article
Number
Type
16 – 95
50 – 150
50 – 150/16 – 95
95 – 240
95 – 240/16 – 95
120 – 300
120 – 300/16 – 95
120 – 300/95 – 240
185 – 400
2
2
2
4
3
4
3
4
6
70
85
85
120
120
142
142
142
170
24
30
30
33
33
38
38
38
42
12,5
15,5
15,5/12,5
20,0
20,0/12,5
25,0
25,0/12,5
25,0/20,0
26,0
32
35
35/32
56
56/32
67
67/32
67/56
82
07 290
07 291
07 292
07 293
07 294
07 295
07 297
07 298
07 296
ZSV 36 16 – 95
ZSV 36 50 – 150
ZSV 36 50 – 150/16 – 95
ZSV 36 95 – 240
ZSV 36 95 – 240/16 – 95
ZSV 36 120 – 300
ZSV 36 120 – 300/16 – 95
ZSV 36 120 – 300/95 – 240
ZSV 36 185 – 400
Screen wire connector with shear-off head bolts
Advantages
– Connection body: brass
– Screws: brass, tin-plated
– For copper screen wires
– For max. 13 aluminium flat wires 5,2 x 1 mm
Screen wire connector with shear-off head bolts
øD
mm
Length L
mm
Article
Number
Type
10 – 50
16
40
07 065
ZSDV 50
CONNECTING
TECHNIQUE
Cross-section
mm2
Screen wire cable lug with shear-off head bolt
Advantages
– Material: brass, tin-plated
– Screws: brass, tin-plated
– For copper screen wires
– For max. 13 aluminium flat wires 5,2 x 1 mm
Screen wire cable lug with shear-off head bolt
Cross-section
mm2
ø D1
mm
ø D2
mm
Length L
mm
10 – 50
16
10,5
39
Article
Number
07 066
Type
ZSDK 50
GT Cable accessories up to 36 kV
71
CONNECTING
TECHNIQUE
Cu-compression ferrules non-tension
Application
– For copper cores
according to DIN VDE 0295
Advantages
– Material: copper
– Surface: uncoated
Cu-compression ferrules
Cross-section
mm2
Core ø
mm
Die code no.
hexagonal round
Dimensions D x L
mm
Article
Number
Type
25
35
50
70
95
120
150
185
240
300
5,6 – 6,5
6,6 – 7,5
7,7 – 8,6
9,3 – 10,2
11,0 – 12,0
12,5 – 13,5
13,9 – 15,0
15,5 – 16,8
17,8 – 19,2
20,0 – 21,6
10
12
14
16
18
20
22
25
28
32
7,0 x 50
8,2 x 50
10,0 x 65
11,5 x 65
13,5 x 90
15,5 x 90
17,0 x 106
19,0 x 106
21,5 x 110
24,5 x 116
07 299
07 300
07 301
07 302
07 303
07 304
07 305
07 306
07 307
07 308
ZPVC 36 25
ZPVC 36 35
ZPVC 36 50
ZPVC 36 70
ZPVC 36 95
ZPVC 36 120
ZPVC 36 150
ZPVC 36 185
ZPVC 36 240
ZPVC 36 300
11 HR
12 HR
14 HR
16 HR
18 HR
21 HR
22 HR
25 HR
Sector shaped conductors must be prerounded. Other cross-sections on request.
Cu-compression ferrules with oil stop
Application
– For copper cores according
to DIN VDE 0295
Advantages
– Material: copper
– Surface: uncoated
CONNECTING
TECHNIQUE
Cu-compression ferrules with oil stop
Cross-section
mm2
Core ø
mm
Die code no.
hexagonal round
Dimensions D x L
mm
Article
Number
Type
25
35
50
70
95
120
150
185
240
300
5,6 – 6,5
6,6 – 7,5
7,7 – 8,6
9,3 – 10,2
11,0 – 12,0
12,5 – 13,5
13,9 – 15,0
15,5 – 16,8
17,8 – 19,2
20,0 – 21,6
10
12
14
16
18
20
22
25
28
32
7,0 x 55
8,2 x 55
10,0 x 70
11,5 x 70
13,5 x 95
15,5 x 95
17,0 x 111
19,0 x 111
21,5 x 115
24,5 x 121
07 310
07 311
07 312
07 313
07 314
07 315
07 316
07 317
07 318
07 319
ZPVCT 36 25
ZPVCT 36 35
ZPVCT 36 50
ZPVCT 36 70
ZPVCT 36 95
ZPVCT 36 120
ZPVCT 36 150
ZPVCT 36 185
ZPVCT 36 240
ZPVCT 36 300
11 HR
12 HR
14 HR
16 HR
18 HR
21 HR
22 HR
25 HR
Sector shaped conductors must be prerounded. Other cross-sections on request.
72
GT Cable accessories up to 36 kV
CONNECTING
TECHNIQUE
Cu-reduction compression ferrules with oil stop
Advantages
– Material: copper
– Surface: uncoated
Application
– For copper cores
according to DIN VDE 0295
Cu-reduction compression ferrules
Cross-section
Core ø
mm
Die code no.
Compr. insert
mm2
D1
D2
hexag.
35 – 25
50 – 25
50 – 35
70 – 35
70 – 50
95 – 50
95 – 70
120 – 70
120 – 95
150 – 95
150 – 120
185 – 120
185 – 150
240 – 150
240 – 185
300 – 185
300 – 240
6,6 – 7,5
7,7 – 8,6
7,7 – 8,6
9,3 – 10,2
9,3 – 10,2
11,0 – 12,0
11,0 – 12,0
12,5 – 13,5
12,5 – 13,5
13,9 – 15,0
13,9 – 15,0
15,5 – 16,8
15,5 – 16,8
17,8 – 19,2
17,8 – 19,2
20,0 – 21,6
20,0 – 21,6
5,6 – 6,5
5,6 – 6,5
6,6 – 7,5
6,6 – 7,5
7,7 – 8,6
7,7 – 8,6
9,3 – 10,2
9,3 – 10,2
11,0 – 12,0
11,0 – 12,0
12,5 – 13,5
12,5 – 13,5
13,9 – 15,0
13,9 – 15,0
15,5 – 16,8
15,5 – 16,8
17,8 – 19,2
12
14
14
16
16
18
18
20
20
22
22
25
25
28
28
32
32
Dimensions
mm
round
hydr.
D1
11 R
12 R
12 R
14 R
14 R
16 R
16 R
18 R
18 R
21 R
21 R
22 R
22 R
25 R
25 R
8,2
10,0
10,0
11,5
11,5
13,5
13,5
15,5
15,5
17,0
17,0
19,0
19,0
21,5
21,5
24,5
24,5
D2
L
7,0
7,0
8,2
8,2
10,0
10,0
11,5
11,5
13,5
13,5
15,5
15,5
17,0
17,0
19,0
19,0
21,5
55
70
70
70
70
95
95
95
95
111
111
111
111
115
115
121
121
Article
Number
Type
07 320
07 321
07 322
07 323
07 324
07 325
07 326
07 327
07 328
07 329
07 330
07 331
07 332
07 333
07 334
07 335
07 336
ZPVC 36 3525
ZPVC 36 5025
ZPVC 36 5035
ZPVC 36 7035
ZPVC 36 7050
ZPVC 36 9550
ZPVC 36 9570
ZPVC 36 12070
ZPVC 36 12095
ZPVC 36 15095
ZPVC 36 150120
ZPVC 36 185120
ZPVC 36 185150
ZPVC 36 240150
ZPVC 36 240185
ZPVC 36 300185
ZPVC 36 300240
CONNECTING
TECHNIQUE
Sector shaped conductors must be prerounded. Other cross-sections on request.
GT Cable accessories up to 36 kV
73
CONNECTING
TECHNIQUE
Al-compression ferrules non-tension
Application
– For aluminium cores
according to DIN VDE 0295
Advantages
– Material: aluminium
– Surface: uncoated
Al-compression ferrules non-tension
Cross-section
mm2
Core ø
mm
Die code no.
Compr. insert
hexagonal
Dimensions mm
D
L
Article
Number
Type
25
35
50
70
95
120
150
185
240
300
5,6 – 6,7
6,6 – 7,8
7,7 – 8,6
9,3 – 10,2
11,0 – 12,0
12,5 – 13,5
13,9 – 15,0
15,5 – 16,8
17,8 – 19,2
20,0 – 21,6
12
14
16
18
22
22
25
28
32
34
6,8
8,0
9,8
11,2
13,2
14,7
16,3
18,3
21,0
23,3
07 270
07 271
07 272
07 273
07 274
07 275
07 276
07 277
07 278
07 279
ZPVA 36 25
ZPVA 36 35
ZPVA 36 50
ZPVA 36 70
ZPVA 36 95
ZPVA 36 120
ZPVA 36 150
ZPVA 36 185
ZPVA 36 240
ZPVA 36 300
90
90
90
95
100
105
105
125
125
125
Al-compression ferrules with oil stop
Advantages
– Material: aluminium
– Surface: uncoated
Application
– For aluminium cores
according to
DIN VDE 0295
CONNECTING
TECHNIQUE
Al-compression ferrules with oil stop
Cross-section
mm2
Core ø
mm
Die code no.
Compr. insert
hexagonal
Dimensions mm
D
L
Article
Number
Type
35
50
70
95
120
150
185
240
300
6,6 – 7,8
7,7 – 8,6
9,3 – 10,2
11,0 – 12,0
12,5 – 13,5
13,9 – 15,0
15,5 – 16,8
17,8 – 19,2
20,0 – 21,6
14
16
18
22
22
25
28
32
34
8,3
10,0
11,3
13,6
14,8
16,5
18,3
21,0
23,3
07 340
07 341
07 342
07 343
07 344
07 345
07 346
07 347
07 348
ZPVAT 36 35
ZPVAT 36 50
ZPVAT 36 70
ZPVAT 36 95
ZPVAT 36 120
ZPVAT 36 150
ZPVAT 36 185
ZPVAT 36 240
ZPVAT 36 300
95
95
100
105
110
110
130
130
135
When using round stranded, compressed (RMV) conductors 185/240 mm ² , the use of connectors with aligned
inner diameter is recommended. The Compression ferrules are filled with contact grease. Sector shaped conductors must be prerounded. Other cross-sections on request.
74
GT Cable accessories up to 36 kV
CONNECTING
TECHNIQUE
Al-reduction compression ferrules with oil stop
Advantages
– Material: aluminium
– Surface: uncoated
Application
– For aluminium cores
according to DIN VDE 0295
Al-reduction compression ferrules with oil stop
Cross-section
mm2
Core ø
mm
D1
35 – 25
50 – 25
50 – 35
70 – 35
70 – 50
95 – 50
95 – 70
120 – 70
120 – 95
150 – 95
150 – 120
185 – 120
185 -150
240 – 150
240 – 185
300 – 185
300 – 240
6,6 – 7,8
7,7 – 8,6
7,7 – 8,6
9,3 – 10,2
9,3 – 10,2
11,0 – 12,0
11,0 – 12,0
12,5 – 13,5
12,5 – 13,5
13,9 – 15,0
13,9 – 15,0
15,5 – 16,8
15,5 – 16,8
17,8 – 19,2
17,8 – 19,2
20,0 – 21,6
20,0 – 21,6
D2
Die code no.
Compr. insert
hexagonal
Dimensions
mm
D1
D2
L
5,6 – 6,7
5,6 – 6,7
6,6 – 7,8
6,6 – 7,8
7,7 – 8,6
7,7 – 8,6
9,3 – 10,2
9,3 – 10,2
11,0 – 12,0
11,0 – 12,0
12,5 – 13,5
12,5 – 13,5
13,9 – 15,0
13,9 – 15,0
15,5 – 16,8
15,5 – 16,8
17,8 – 19,2
14
16
16
18
18
22
22
22
22
25
25
28
28
32
32
34
34
8,3
10,0
10,0
11,3
11,3
13,6
13,6
14,8
14,8
16,5
16,5
18,3
18,3
21,0
21,0
23,3
23,3
95
95
95
100
100
105
105
110
110
110
110
130
130
130
130
135
135
7,0
7,0
8,3
8,3
10,0
10,0
11,3
11,3
13,5
13,5
14,8
14,8
16,5
16,5
18,3
18,3
21,0
Article
Number
Type
07 350
07 351
07 352
07 353
07 354
07 355
07 356
07 357
07 358
07 359
07 360
07 361
07 362
07 363
07 364
07 365
07 366
ZPVA 36 3525
ZPVA 36 5025
ZPVA 36 5035
ZPVA 36 7035
ZPVA 36 7050
ZPVA 36 9550
ZPVA 36 9570
ZPVA 36 12070
ZPVA 36 12095
ZPVA 36 15095
ZPVA 36 150120
ZPVA 36 185120
ZPVA 36 185150
ZPVA 36 240150
ZPVA 36 240185
ZPVA 36 300185
ZPVA 36 300240
CONNECTING
TECHNIQUE
When using round stranded, compressed (RMV) conductors 185/240 mm ² , the use of connectors with aligned
inner diameter is recommended. The Compression ferrules are filled with contact grease. Sector shaped conductors must be prerounded. Other cross-sections on request.
GT Cable accessories up to 36 kV
75
CONNECTING
TECHNIQUE
Al-Cu-compression ferrules non-tension
Advantages
– Material: pure aluminium and copper
– Surface: uncoated
Application
– For aluminium- and
copper cores
according to DIN VDE 0295
Al-Cu-compression ferrules
Cross-section
Al
Cu
Die code no.
Compression insert
Dimensions
mm
mm2
Al
Cu
D1
D2
L
70 – 35
70 – 50
70 – 70
95 – 35
95 – 50
95 – 70
95 – 95
120 – 35
120 – 50
120 – 70
120 – 95
120 – 120
150 – 70
150 – 95
150 – 120
150 – 150
185 – 70
185 – 95
185 – 120
185 – 150
185 – 185
240 – 120
240 – 150
240 – 185
240 – 240
300 – 150
300 – 185
300 – 240
18
18
18
22
22
22
22
22
22
22
22
22
25
25
25
25
28
28
28
28
28
32
32
32
32
34
34
34
12
14
16
12
14
16
18
12
14
16
18
20
16
18
20
22
16
18
20
22
25
20
22
25
28
22
25
28
11,2
11,2
11,2
13,2
13,2
13,2
13,2
14,7
14,7
14,7
14,7
14,7
16,3
16,3
16,3
16,3
18,3
18,3
18,3
18,3
18,3
21,0
21,0
21,0
21,0
23,3
23,3
23,3
8,2
10,0
11,5
8,2
10,0
11,5
13,5
8,2
10,0
11,5
13,5
15,5
11,5
13,5
15,5
17,0
11,5
13,5
15,5
17,0
19,0
15,5
17,0
19,0
21,5
17,0
19,0
21,5
86
94
94
91
98
98
112
95
101
101
114
114
103
116
116
125
117
128
128
137
139
138
138
143
143
138
143
143
Article
Number
Type
07 370
07 371
07 372
07 373
07 374
07 375
07 376
07 377
07 378
07 379
07 380
07 381
07 382
07 383
07 384
07 385
07 386
07 387
07 388
07 389
07 390
07 391
07 392
07 393
07 394
07 395
07 396
07 397
ZPAC 36 7035
ZPAC 36 7050
ZPAC 36 7070
ZPAC 36 9535
ZPAC 36 9550
ZPAC 36 9570
ZPAC 36 9595
ZPAC 36 12035
ZPAC 36 12050
ZPAC 36 12070
ZPAC 36 12095
ZPAC 36 120120
ZPAC 36 15070
ZPAC 36 15095
ZPAC 36 150120
ZPAC 36 150150
ZPAC 36 18570
ZPAC 36 18595
ZPAC 36 185120
ZPAC 36 185150
ZPAC 36 185185
ZPAC 36 240120
ZPAC 36 240150
ZPAC 36 240185
ZPAC 36 240240
ZPAC 36 300150
ZPAC 36 300185
ZPAC 36 300240
CONNECTING
TECHNIQUE
hexagonal
When using round stranded, compressed (RMV) conductors 185/240 mm ² , the use of connectors with aligned
inner diameter is recommended. The Compression ferrules are filled with contact grease. Sector shaped conductors must be prerounded. Other cross-sections on request.
76
GT Cable accessories up to 36 kV
CONNECTING
TECHNIQUE
Cu-compression cable lugs
Advantages
– Material: copper
– Surface: uncoated
Application
– For copper cores
according to DIN VDE 0295
Cross-section
Core
mm2
16 x 6
16 x 8
16 x 10
25 x 8
25 x 10
25 x 12
25 x 16
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
50 x 16
70 x 8
70 x 10
70 x 12
70 x 16
70 x 20
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
120 x 20
150 x 10
150 x 12
150 x 16
150 x 20
185 x 10
185 x 12
185 x 16
185 x 20
240 x 12
240 x 16
240 x 20
300 x 16
300 x 20
Flat hole diameter
mm
Die code no.
Compr. insert
hexagonal
Dimensions
mm
D
L
W
6,5
8,5
10,5
8,5
10,5
13,0
17,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
8,5
10,5
13,0
17,0
21,0
10,5
13,0
17,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
13,0
17,0
21,0
17,0
21,0
8
8
8
10
10
10
10
12
12
12
14
14
14
14
16
16
16
16
16
18
18
18
20
20
20
20
22
22
22
22
25
25
25
25
28
28
28
32
32
5,5
5,5
5,5
7,0
7,0
7,0
7,0
8,2
8,2
8,2
10,0
10,0
10,0
10,0
11,5
11,5
11,5
11,5
11,5
13,5
13,5
13,5
15,5
15,5
15,5
15,5
17,0
17,0
17,0
17,0
19,0
19,0
19,0
19,0
21,5
21,5
21,5
24,5
24,5
13,0
13,0
17,0
16,0
17,0
19,0
25,0
17,0
19,0
21,0
20,0
22,0
24,0
28,0
24,0
24,0
24,0
30,0
32,0
28,0
28,0
32,0
32,0
32,0
32,0
38,0
34,0
34,0
34,0
40,0
37,0
37,0
37,0
40,0
42,0
42,0
45,0
48,0
48,0
36,0
36,0
36,0
38,0
38,0
38,0
38,0
42,0
42,0
42,0
52,0
52,0
52,0
52,0
55,0
55,0
55,0
55,0
55,0
65,0
65,0
65,0
70,0
70,0
70,0
70,0
78,0
78,0
78,0
78,0
82,0
82,0
82,0
82,0
92,0
92,0
92,0
100,0
100,0
Article
Number
Type
07 118
07 102
07 119
07 120
07 103
07 121
07 122
07 123
07 104
07 124
07 125
07 105
07 126
07 127
07 128
07 129
07 106
07 130
07 131
07 132
07 107
07 133
07 134
07 108
07 135
07 136
07 137
07 109
07 138
07 139
07 140
07 141
07 110
07 142
07 143
07 111
07 144
07 112
07 145
ZPKCU 16/6
ZPKCU 16/8
ZPKCU 16/10
ZPKCU 25/8
ZPKCU 25/10
ZPKCU 25/12
ZPKCU 25/16
ZPKCU 35/8
ZPKCU 35/10
ZPKCU 35/12
ZPKCU 50/8
ZPKCU 50/10
ZPKCU 50/12
ZPKCU 50/16
ZPKCU 70/8
ZPKCU 70/10
ZPKCU 70/12
ZPKCU 70/16
ZPKCU 70/20
ZPKCU 95/10
ZPKCU 95/12
ZPKCU 95/16
ZPKCU 120/10
ZPKCU 120/12
ZPKCU 120/16
ZPKCU 120/20
ZPKCU 150/10
ZPKCU 150/12
ZPKCU 150/16
ZPKCU 150/20
ZPKCU 185/10
ZPKCU 185/12
ZPKCU 185/16
ZPKCU 185/20
ZPKCU 240/12
ZPKCU 240/16
ZPKCU 240/20
ZPKCU 300/16
ZPKCU 300/20
GT Cable accessories up to 36 kV
CONNECTING
TECHNIQUE
Cu-compression cable lugs
77
CONNECTING
TECHNIQUE
k
Cu-compression cable lugs
Application
– For copper cores
according to DIN VDE 0295
Advantages
– Material: copper
– Surface: tin-plated
CONNECTING
TECHNIQUE
Cu-compression cable lugs
78
Cross-section
Core
mm2
16 x 6
16 x 8
16 x 10
25 x 8
25 x 10
25 x 12
25 x 16
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
50 x 16
70 x 8
70 x 10
70 x 12
70 x 16
70 x 20
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
120 x 20
150 x 10
150 x 12
150 x 16
150 x 20
185 x 10
185 x 12
185 x 16
185 x 20
240 x 12
240 x 16
240 x 20
300 x 16
300 x 20
Flat hole diameter
mm
Die code no.
Compr. insert
hexagonal
Dimensions
mm
D
L
W
6,5
8,5
10,5
8,5
10,5
13,0
17,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
8,5
10,5
13,0
17,0
21,0
10,5
13,0
17,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
13,0
17,0
21,0
17,0
21,0
8
8
8
10
10
10
10
12
12
12
14
14
14
14
16
16
16
16
16
18
18
18
20
20
20
20
22
22
22
22
25
25
25
25
28
28
28
32
32
5,5
5,5
5,5
7,0
7,0
7,0
7,0
8,2
8,2
8,2
10,0
10,0
10,0
10,0
11,5
11,5
11,5
11,5
11,5
13,5
13,5
13,5
15,5
15,5
15,5
15,5
17,0
17,0
17,0
17,0
19,0
19,0
19,0
19,0
21,5
21,5
21,5
24,5
24,5
13,0
13,0
17,0
16,0
17,0
19,0
25,0
17,0
19,0
21,0
20,0
22,0
24,0
28,0
24,0
24,0
24,0
30,0
32,0
28,0
28,0
32,0
32,0
32,0
32,0
38,0
34,0
34,0
34,0
40,0
37,0
37,0
37,0
40,0
42,0
42,0
45,0
48,0
48,0
GT Cable accessories up to 36 kV
36,0
36,0
36,0
38,0
38,0
38,0
38,0
42,0
42,0
42,0
52,0
52,0
52,0
52,0
55,0
55,0
55,0
55,0
55,0
65,0
65,0
65,0
70,0
70,0
70,0
70,0
78,0
78,0
78,0
78,0
82,0
82,0
82,0
82,0
92,0
92,0
92,0
100,0
100,0
Article
Number
Type
07 400
07 401
07 402
07 403
07 404
07 405
07 406
07 407
07 408
07 409
07 410
07 411
07 412
07 413
07 414
07 415
07 416
07 417
07 418
07 419
07 420
07 421
07 422
07 423
07 424
07 425
07 426
07 427
07 428
07 429
07 430
07 431
07 432
07 433
07 434
07 435
07 436
07 437
07 438
ZPKCUV 16/6
ZPKCUV 16/8
ZPKCUV 16/10
ZPKCUV 25/8
ZPKCUV 25/10
ZPKCUV 25/12
ZPKCUV 25/16
ZPKCUV 35/8
ZPKCUV 35/10
ZPKCUV 35/12
ZPKCUV 50/8
ZPKCUV 50/10
ZPKCUV 50/12
ZPKCUV 50/16
ZPKCUV 70/8
ZPKCUV 70/10
ZPKCUV 70/12
ZPKCUV 70/16
ZPKCUV 70/20
ZPKCUV 95/10
ZPKCUV 95/12
ZPKCUV 95/16
ZPKCUV 120/10
ZPKCUV 120/12
ZPKCUV 120/16
ZPKCUV 120/20
ZPKCUV 150/10
ZPKCUV 150/12
ZPKCUV 150/16
ZPKCUV 150/20
ZPKCUV 185/10
ZPKCUV 185/12
ZPKCUV 185/16
ZPKCUV 185/20
ZPKCUV 240/12
ZPKCUV 240/16
ZPKCUV 240/20
ZPKCUV 300/16
ZPKCUV 300/20
Vek
CONNECTING
TECHNIQUE
Cu-compression cable lugs, longitudinal water-proof
Application
– For copper cores
according to DIN VDE 0295
Advantages
– Material: copper
– Surface: uncoated
Cross-section
Core
mm2
16 x 8
16 x 10
16 x 12
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
70 x 8
70 x 10
70 x 12
70 x 16
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
120 x 20
150 x 10
150 x 12
150 x 16
150 x 20
185 x 10
185 x 12
185 x 16
185 x 20
240 x 12
240 x 16
240 x 20
300 x 16
300 x 20
Flat hole diameter
mm
Die code no. Dimensions
Compr. insert mm
hexagonal
D
L
W
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
13,0
17,0
21,0
17,0
21,0
8
8
8
10
10
10
12
12
12
14
14
14
16
16
16
16
18
18
18
20
20
20
20
22
22
22
22
25
25
25
25
28
28
28
32
32
20,0
20,0
20,0
20,0
20,0
24,0
20,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
30,0
25,0
25,0
30,0
30,0
30,0
30,0
38,0
30,0
30,0
30,0
38,0
30,0
30,0
30,0
38,0
38,0
38,0
38,0
38,0
38,0
5,5
5,5
5,5
7,0
7,0
7,0
8,2
8,2
8,2
10,0
10,0
10,0
11,5
11,5
11,5
11,5
13,5
13,5
13,5
15,5
15,5
15,5
15,5
17,0
17,0
17,0
17,0
19,0
19,0
19,0
19,0
21,5
21,5
21,5
24,5
24,5
36,0
36,0
36,0
38,5
38,5
38,5
40,0
40,0
40,0
48,0
48,0
48,0
49,0
49,0
49,0
53,0
56,0
56,0
60,0
62,0
62,0
62,0
66,0
63,0
63,0
63,0
67,0
69,0
69,0
69,0
73,0
74,0
74,0
74,0
85,0
85,0
Article
Number
Type
07 440
07 441
07 442
07 443
07 444
07 445
07 446
07 447
07 448
07 449
07 450
07 451
07 452
07 453
07 454
07 455
07 456
07 457
07 458
07 459
07 460
07 461
07 462
07 463
07 464
07 465
07 466
07 467
07 468
07 469
07 470
07 471
07 472
07 473
07 474
07 475
ZPKCUL 16/8
ZPKCUL 16/10
ZPKCUL 16/12
ZPKCUL 25/8
ZPKCUL 25/10
ZPKCUL 25/12
ZPKCUL 35/8
ZPKCUL 35/10
ZPKCUL 35/12
ZPKCUL 50/8
ZPKCUL 50/10
ZPKCUL 50/12
ZPKCUL 70/8
ZPKCUL 70/10
ZPKCUL 70/12
ZPKCUL 70/16
ZPKCUL 95/10
ZPKCUL 95/12
ZPKCUL 95/16
ZPKCUL 120/10
ZPKCUL 120/12
ZPKCUL 120/16
ZPKCUL 120/20
ZPKCUL 150/10
ZPKCUL 150/12
ZPKCUL 150/16
ZPKCUL 150/20
ZPKCUL 185/10
ZPKCUL 185/12
ZPKCUL 185/16
ZPKCUL 185/20
ZPKCUL 240/12
ZPKCUL 240/16
ZPKCUL 240/20
ZPKCUL 300/16
ZPKCUL 300/20
CONNECTING
TECHNIQUE
Cu-compression cable lugs
Sector shaped conductors must be prerounded.
GT Cable accessories up to 36 kV
79
CONNECTING
TECHNIQUE
Cu-compression cable lugs, longitudinal water-proof
Application
– For copper cores
according to DIN VDE 0295
Advantages
– Material: copper
– Surface: tin-plated
CONNECTING
TECHNIQUE
Cu-compression cable lugs
Cross-section
Core
mm2
16 x 8
16 x 10
16 x 12
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
70 x 8
70 x 10
70 x 12
70 x 16
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
120 x 20
150 x 10
150 x 12
150 x 16
150 x 20
185 x 10
185 x 12
185 x 16
185 x 20
240 x 12
240 x 16
240 x 20
300 x 16
300 x 20
Flat hole diameter
mm
Die code no. Dimensions
Compr. insert mm
hexagonal
D
L
W
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
10,5
13,0
17,0
21,0
13,0
17,0
21,0
17,0
21,0
8
8
8
10
10
10
12
12
12
14
14
14
16
16
16
16
18
18
18
20
20
20
20
22
22
22
22
25
25
25
25
28
28
28
32
32
20,0
20,0
20,0
20,0
20,0
24,0
20,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
30,0
25,0
25,0
30,0
30,0
30,0
30,0
38,0
30,0
30,0
30,0
38,0
30,0
30,0
30,0
38,0
38,0
38,0
38,0
38,0
38,0
Sector shaped conductors must be prerounded.
80
GT Cable accessories up to 36 kV
5,5
5,5
5,5
7,0
7,0
7,0
8,2
8,2
8,2
10,0
10,0
10,0
11,5
11,5
11,5
11,5
13,5
13,5
13,5
15,5
15,5
15,5
15,5
17,0
17,0
17,0
17,0
19,0
19,0
19,0
19,0
21,5
21,5
21,5
24,5
24,5
36,0
36,0
36,0
38,5
38,5
38,5
40,0
40,0
40,0
48,0
48,0
48,0
49,0
49,0
49,0
53,0
56,0
56,0
60,0
62,0
62,0
62,0
66,0
63,0
63,0
63,0
67,0
69,0
69,0
69,0
73,0
7 4,0
7 4,0
7 4,0
85,0
85,0
Article
Number
Type
07 480
07 481
07 482
07 483
07 484
07 485
07 486
07 487
07 488
07 489
07 490
07 491
07 492
07 493
07 494
07 495
07 496
07 497
07 498
07 499
07 500
07 501
07 502
07 503
07 504
07 505
07 506
07 507
07 508
07 509
07 510
07 511
07 512
07 513
07 514
07 515
ZPKCULV 16/8
ZPKCULV 16/10
ZPKCULV 16/12
ZPKCULV 25/8
ZPKCULV 25/10
ZPKCULV 25/12
ZPKCULV 35/8
ZPKCULV 35/10
ZPKCULV 35/12
ZPKCULV 50/8
ZPKCULV 50/10
ZPKCULV 50/12
ZPKCULV 70/8
ZPKCULV 70/10
ZPKCULV 70/12
ZPKCULV 70/16
ZPKCULV 95/10
ZPKCULV 95/12
ZPKCULV 95/16
ZPKCULV 120/10
ZPKCULV 120/12
ZPKCULV 120/16
ZPKCULV 120/20
ZPKCULV 150/10
ZPKCULV 150/12
ZPKCULV 150/16
ZPKCULV 150/20
ZPKCULV 185/10
ZPKCULV 185/12
ZPKCULV 185/16
ZPKCULV 185/20
ZPKCULV 240/12
ZPKCULV 240/16
ZPKCULV 240/20
ZPKCULV 300/16
ZPKCULV 300/20
CONNECTING
TECHNIQUE
Al-compression cable lugs
Application
– For aluminium cores
according to DIN VDE 0295
Advantages
– Material: aluminium
– Surface: uncoated
Cross-section
Core
mm2
16 x 8
16 x 10
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
70 x 10
70 x 12
70 x 16
95 x 10
95 x 12
95 x 16
120 x 12
120 x 16
150 x 12
150 x 16
150 x 20
185 x 12
185 x 16
185 x 20
240 x 12
240 x 16
240 x 20
300 x 16
300 x 20
Flat hole diameter
mm
Die code no.
Compr. insert
hexagonal
Dimensions
mm
D
L
W
8,5
10,5
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
10,5
13,0
17,0
10,5
13,5
17,0
13,0
17,0
13,0
17,0
21,0
13,0
17,0
21,0
13,0
17,0
21,0
17,0
21,0
12
12
12
12
12
14
14
14
16
16
16
18
18
18
22
22
22
22
22
25
25
25
28
28
28
32
32
32
34
34
5,6
5,6
7,0
7,0
7,0
8,3
8,3
8,3
10,0
10,0
10,0
11,5
11,5
11,5
13,5
13,5
13,5
14,8
14,8
16,5
16,5
16,5
18,3
18,3
18,3
21,0
21,0
21,0
23,4
23,4
18,0
18,0
19,0
19,0
23,0
22,0
24,0
24,0
23,0
23,0
23,0
28,0
28,0
28,0
34,0
34,0
34,0
33,0
33,0
37,0
37,0
41,0
41,0
41,0
43,0
45,0
47,0
47,0
50,0
50,0
53,0
53,0
60,0
60,0
60,0
64,0
66,0
66,0
72,0
72,0
72,0
83,0
83,0
83,0
92,0
92,0
92,0
89,0
89,0
97,0
100,0
100,0
105,0
105,0
105,0
116,0
119,0
119,0
125,0
125,0
Article
Number
Type
07 164
07 165
07 166
07 167
07 168
07 169
07 150
07 170
07 171
07 151
07 172
07 173
07 152
07 174
07 175
07 153
07 176
07 154
07 177
07 155
07 178
07 179
07 180
07 156
07 181
07 182
07 157
07 183
07 158
07 184
ZPKAL 16/8
ZPKAL 16/10
ZPKAL 25/8
ZPKAL 25/10
ZPKAL 25/12
ZPKAL 35/8
ZPKAL 35/10
ZPKAL 35/12
ZPKAL 50/8
ZPKAL 50/10
ZPKAL 50/12
ZPKAL 70/10
ZPKAL 70/12
ZPKAL 70/16
ZPKAL 95/10
ZPKAL 95/12
ZPKAL 95/16
ZPKAL 120/12
ZPKAL 120/16
ZPKAL 150/12
ZPKAL 150/16
ZPKAL 150/20
ZPKAL 185/12
ZPKAL 185/16
ZPKAL 185/20
ZPKAL 240/12
ZPKAL 240/16
ZPKAL 240/20
ZPKAL 300/16
ZPKAL 300/20
CONNECTING
TECHNIQUE
Al-compression cable lugs
Sector shaped conductors must be prerounded.
GT Cable accessories up to 36 kV
81
CONNECTING
TECHNIQUE
Al-compression cable lugs
Application
– For aluminium cores
according to DIN VDE 0295
Advantages
– Material: aluminium
– Surface: tin-plated
CONNECTING
TECHNIQUE
Al-compression cable lugs
Cross-section
Core
mm2
16 x 8
16 x 10
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
70 x 10
70 x 12
70 x 16
95 x 10
95 x 12
95 x 16
120 x 12
120 x 16
150 x 12
150 x 16
150 x 20
185 x 12
185 x 16
185 x 20
240 x 12
240 x 16
240 x 20
300 x 16
300 x 20
Flat hole diameter
mm
Die code no.
Compr. insert
hexagonal
Dimensions
mm
D
L
W
8,5
10,5
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
10,5
13,0
17,0
10,5
13,5
17,0
13,0
17,0
13,0
17,0
21,0
13,0
17,0
21,0
13,0
17,0
21,0
17,0
21,0
12
12
12
12
12
14
14
14
16
16
16
18
18
18
22
22
22
22
22
25
25
25
28
28
28
32
32
32
34
34
5,6
5,6
7,0
7,0
7,0
8,3
8,3
8,3
10,0
10,0
10,0
11,5
11,5
11,5
13,5
13,5
13,5
14,8
14,8
16,5
16,5
16,5
18,3
18,3
18,3
21,0
21,0
21,0
23,4
23,4
18,0
18,0
19,0
19,0
23,0
22,0
24,0
24,0
23,0
23,0
23,0
28,0
28,0
28,0
34,0
34,0
34,0
33,0
33,0
37,0
37,0
41,0
41,0
41,0
43,0
45,0
47,0
47,0
50,0
50,0
Sector shaped conductors must be prerounded.
82
GT Cable accessories up to 36 kV
53,0
53,0
60,0
60,0
60,0
64,0
66,0
66,0
72,0
72,0
72,0
83,0
83,0
83,0
92,0
92,0
92,0
89,0
89,0
97,0
100,0
100,0
105,0
105,0
105,0
116,0
119,0
119,0
125,0
125,0
Article
Number
Type
07 520
07 521
07 522
07 523
07 524
07 525
07 526
07 527
07 528
07 529
07 530
07 531
07 532
07 533
07 534
07 535
07 536
07 537
07 538
07 539
07 540
07 541
07 542
07 543
07 544
07 545
07 546
07 547
07 548
07 549
ZPKALV 16/8
ZPKALV 16/10
ZPKALV 25/8
ZPKALV 25/10
ZPKALV 25/12
ZPKALV 35/8
ZPKALV 35/10
ZPKALV 35/12
ZPKALV 50/8
ZPKALV 50/10
ZPKALV 50/12
ZPKALV 70/10
ZPKALV 70/12
ZPKALV 70/16
ZPKALV 95/10
ZPKALV 95/12
ZPKALV 95/16
ZPKALV 120/12
ZPKALV 120/16
ZPKALV 150/12
ZPKALV 150/16
ZPKALV 150/20
ZPKALV 185/12
ZPKALV 185/16
ZPKALV 185/20
ZPKALV 240/12
ZPKALV 240/16
ZPKALV 240/20
ZPKALV 300/16
ZPKALV 300/20
CONNECTING
TECHNIQUE
Al-compression cable lugs, longitudinal water-proof
Application
– For aluminium cores
according to DIN VDE 0295
Advantages
– Material: aluminium
– Surface: uncoated
Cross-section
Core
mm2
16 x 8
16 x 10
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
70 x 8
70 x 10
70 x 12
95 x 8
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
150 x 10
150 x 12
150 x 16
185 x 10
185 x 12
185 x 16
240 x 12
240 x 16
240 x 20
300 x 12
300 x 16
300 x 20
Flat hole diameter
mm
Die code no. Dimensions
hexagonal
mm
D
L
W
8,5
10,5
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
13,0
17,0
21,0
13,0
17,0
21,0
12
12
12
12
12
14
14
14
16
16
16
18
18
18
22
22
22
22
22
22
22
25
25
25
28
28
28
32
32
32
34
34
34
20,0
20,0
20,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
38,0
38,0
38,0
38,0
38,0
38,0
5,4
5,4
6,8
6,8
6,8
8,0
8,0
8,0
9,8
9,8
9,8
11,2
11,2
11,2
13,2
13,2
13,2
13,2
14,7
14,7
14,7
16,3
16,3
16,3
18,3
18,3
18,3
21,0
21,0
21,0
23,3
23,3
23,3
50,0
50,0
50,0
50,0
50,0
62,0
62,0
62,0
62,0
62,0
62,0
72,0
72,0
72,0
75,0
75,0
75,0
80,0
80,0
80,0
80,0
90,0
90,0
90,0
91,0
91,0
91,0
103,0
103,0
103,0
103,0
103,0
103,0
Article
Number
Type
07 555
07 556
07 557
07 558
07 559
07 560
07 561
07 562
07 563
07 564
07 565
07 566
07 567
07 568
07 569
07 570
07 571
07 572
07 573
07 574
07 575
07 576
07 577
07 578
07 579
07 580
07 581
07 582
07 583
07 584
07 585
07 586
07 587
ZPKALL 16/8
ZPKALL 16/10
ZPKALL 25/8
ZPKALL 25/10
ZPKALL 25/12
ZPKALL 35/8
ZPKALL 35/10
ZPKALL 35/12
ZPKALL 50/8
ZPKALL 50/10
ZPKALL 50/12
ZPKALL 70/8
ZPKALL 70/10
ZPKALL 70/12
ZPKALL 95/8
ZPKALL 95/10
ZPKALL 95/12
ZPKALL 95/16
ZPKALL 120/10
ZPKALL 120/12
ZPKALL 120/16
ZPKALL 150/10
ZPKALL 150/12
ZPKALL 150/16
ZPKALL 185/10
ZPKALL 185/12
ZPKALL 185/16
ZPKALL 240/12
ZPKALL 240/16
ZPKALL 240/20
ZPKALL 300/12
ZPKALL 300/16
ZPKALL 300/20
CONNECTING
TECHNIQUE
Al-compression cable lugs
Sector shaped conductors must be prerounded.
GT Cable accessories up to 36 kV
83
CONNECTING
TECHNIQUE
Al-compression cable lugs, longitudinal water-proof
Application
– For aluminium cores
according to DIN VDE 0295
– According to DIN 46 329
Advantages
– Material: aluminium
– Surface: tin-plated
CONNECTING
TECHNIQUE
Al-compression cable lugs
Cross-section
Core
mm2
16 x 8
16 x 10
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
50 x 8
50 x 10
50 x 12
70 x 8
70 x 10
70 x 12
95 x 8
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
150 x 10
150 x 12
150 x 16
185 x 10
185 x 12
185 x 16
240 x 12
240 x 16
240 x 20
300 x 12
300 x 16
300 x 20
Flat hole diameter
mm
Die code no.
Compr. insert
hexagonal
Dimensions
mm
D
L
W
8,5
10,5
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
13,0
17,0
21,0
13,0
17,0
21,0
12,0
12,0
12,0
12,0
12,0
14,0
14,0
14,0
16,0
16,0
16,0
18,0
18,0
18,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
25,0
25,0
25,0
28,0
28,0
28,0
32,0
32,0
32,0
34,0
34,0
34,0
5,4
5,4
6,8
6,8
6,8
8,0
8,0
8,0
9,8
9,8
9,8
11,2
11,2
11,2
13,2
13,2
13,2
13,2
14,7
14,7
14,7
16,3
16,3
16,3
18,3
18,3
18,3
21,0
21,0
21,0
23,3
23,3
23,3
20,0
20,0
20,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
38,0
38,0
38,0
38,0
38,0
38,0
Sector shaped conductors must be prerounded.
84
GT Cable accessories up to 36 kV
50,0
50,0
50,0
50,0
50,0
62,0
62,0
62,0
62,0
62,0
62,0
72,0
72,0
72,0
75,0
75,0
75,0
80,0
80,0
80,0
80,0
90,0
90,0
90,0
91,0
91,0
91,0
103,0
103,0
103,0
103,0
103,0
103,0
Article
Number
Type
07 590
07 591
07 592
07 593
07 594
07 595
07 596
07 597
07 598
07 599
07 600
07 601
07 602
07 603
07 605
07 604
07 606
07 607
07 608
07 609
07 610
07 611
07 612
07 613
07 614
07 615
07 616
07 617
07 618
07 619
07 620
07 621
07 622
ZPKALLV 16/8
ZPKALLV 16/10
ZPKALLV 25/8
ZPKALLV 25/10
ZPKALLV 25/12
ZPKALLV 35/8
ZPKALLV 35/10
ZPKALLV 35/12
ZPKALLV 50/8
ZPKALLV 50/10
ZPKALLV 50/12
ZPKALLV 70/8
ZPKALLV 70/10
ZPKALLV 70/12
ZPKALLV 95/8
ZPKALLV 95/10
ZPKALLV 95/12
ZPKALLV 95/16
ZPKALLV 120/10
ZPKALLV 120/12
ZPKALLV 120/16
ZPKALLV 150/10
ZPKALLV 150/12
ZPKALLV 150/16
ZPKALLV 185/10
ZPKALLV 185/12
ZPKALLV 185/16
ZPKALLV 240/12
ZPKALLV 240/16
ZPKALLV 240/20
ZPKALLV 300/12
ZPKALLV 300/16
ZPKALLV 300/20
CONNECTING
TECHNIQUE
Al-Cu-compression cable lugs, longitudinal water-proof
Application
– For aluminium cores
according to DIN VDE 0295
Advantages
– Sleeve: pure aluminium
– Plate: massive copper
– Surface: uncoated
Cross-section
Core
mm2
16 x 8
16 x 10
16 x 12
25 x 8
25 x 10
25 x 12
35 x 8
35 x 10
35 x 12
35 x 16
50 x 8
50 x 10
50 x 12
50 x 16
70 x 8
70 x 10
70 x 12
70 x 16
95 x 10
95 x 12
95 x 16
120 x 10
120 x 12
120 x 16
150 x 10
150 x 12
150 x 16
185 x 10
185 x 12
185 x 16
240 x 12
240 x 16
240 x 20
300 x 12
300 x 16
300 x 20
Flat hole diameter
mm
Die code no. Dimensions
Compr. insert mm
hexagonal
D
L
W
8,5
10,5
13,0
8,5
10,5
13,0
8,5
10,5
13,0
17,0
8,5
10,5
13,0
17,0
8,5
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
10,5
13,0
17,0
13,0
17,0
21,0
13,0
17,0
21,0
12,0
12,0
12,0
12,0
12,0
12,0
14,0
14,0
14,0
14,0
16,0
16,0
16,0
16,0
18,0
18,0
18,0
18,0
22,0
22,0
22,0
22,0
22,0
22,0
25,0
25,0
25,0
28,0
28,0
28,0
32,0
32,0
32,0
34,0
34,0
34,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
30,0
25,0
25,0
25,0
30,0
25,0
25,0
25,0
30,0
25,0
25,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
30,0
38,0
38,0
38,0
38,0
38,0
38,0
5,4
5,4
5,4
6,8
6,8
6,8
8,0
8,0
8,0
8,0
9,8
9,8
9,8
9,8
11,2
11,2
11,2
11,2
13,2
13,2
13,2
14,7
14,7
14,7
16,3
16,3
16,3
18,3
18,3
18,3
21,0
21,0
21,0
23,3
23,3
23,3
63,5
63,5
63,5
63,5
63,5
63,5
74,5
74,5
74,5
79,0
75,5
75,5
75,5
80,0
83,5
83,5
83,5
88,0
86,5
86,5
91,0
92,0
92,0
92,0
105,0
105,0
105,0
107,0
107,0
107,0
120,0
120,0
120,0
124,0
124,0
124,0
Article
Number
Type
07 630
07 631
07 632
07 633
07 634
07 635
07 636
07 637
07 638
07 639
07 640
07 641
07 642
07 643
07 644
07 645
07 646
07 647
07 648
07 649
07 650
07 651
07 652
07 653
07 654
07 655
07 656
07 657
07 658
07 659
07 660
07 661
07 662
07 663
07 664
07 665
ZPKACL 16/8
ZPKACL 16/10
ZPKACL 16/12
ZPKACL 25/8
ZPKACL 25/10
ZPKACL 25/12
ZPKACL 35/8
ZPKACL 35/10
ZPKACL 35/12
ZPKACL 35/16
ZPKACL 50/8
ZPKACL 50/10
ZPKACL 50/12
ZPKACL 50/16
ZPKACL 70/8
ZPKACL 70/10
ZPKACL 70/12
ZPKACL 70/16
ZPKACL 95/10
ZPKACL 95/12
ZPKACL 95/16
ZPKACL 120/10
ZPKACL 120/12
ZPKACL 120/16
ZPKACL 150/10
ZPKACL 150/12
ZPKACL 150/16
ZPKACL 185/10
ZPKACL 185/12
ZPKACL 185/16
ZPKACL 240/12
ZPKACL 240/16
ZPKACL 240/20
ZPKACL 300/12
ZPKACL 300/16
ZPKACL 300/20
CONNECTING
TECHNIQUE
Al-Cu-compression cable lugs
Sector shaped conductors must be prerounded.
GT Cable accessories up to 36 kV
85
TOOLS
Tools by GT
86
GT Cable accessories up to 36 kV
TOOLS
Tools for medium voltage cables
Tool set
– For cutting cable jackets
– For peeling the extruded outer conductive layer
– For chamfering the edges
– For cross-sections from 35 mm² up to 500 mm²
– Complete in a tool case
– Easy handling
– Practical and safe
Consisting of:
Jacket- and edge cutter, peeling tool
Article Number
Set
pc.
Type
Tool case with padding
270 120
1
WSS
Tool case
Content
Article Number
Set
pc.
Type
With foam insert
Without tools
270 121
1
WSKO
Jacket cutter
for removing the cable jacket
Up to 50 mm cable diameter
Bottom
Top
Feed unit
Knife holder
Idle pulley set
Knife set
Knife set
Plastic prism
Content
Article Number
Set
pcs.
Type
Complete
Spare part
Spare part
Spare part
Spare part
Spare part
Spare part
Spare part
Spare part
270 122
270 123
270 124
270 125
270 126
270 127
270 128
270 129
270 130
1
1
1
1
1
1
5
5
1
WSMT
WSMTU
WSMTO
WSMTV
WSMTM
WSMTL
WSMS1
WSMS2
WSMK
Jacket cutter
for removing the cable jacket
Cable Ø 32 up to 70 mm
Content
Article Number
Set
pc.
Type
Complete
270 136
1
WSMT 70
GT Cable accessories up to 36 kV
TOOLS
Tool set - spare parts
87
TOOLS
Tools for medium voltage cables
Application
– Universal edge cutter for chamfering the
shortened XLPE-isolation
Advantages
– For cross-sections up to 300 mm 2
– Reduced slip-on strengths
Edge cutter
for chamfering the conductor isolation
Cable Ø up to 42 mm
Replacement blade
Content
Article Number
Set
pc.
Type
Complete
270 131
270 132
1
1
WSKS
WSKSM
Application
– For controlled peeling of the
extruded conductive layer
Advantages
– Operating range 10 – 50 mm
– Peeling knife made of carbide
– Peeling depth can be adjusted manually
from 0 mm up to 1,2 mm
– Beginning of peeling directly at the cable end
– Automatic feed
Content
Article Number
Set
pc.
Type
For removing the extruded conductive layer
Stop ring set
Knife set
Complete
Spare part
Spare part
270 133
270 134
270 135
1
1
1
WSSG
WSSGA
WSSGM
TOOLS
Peeling tool
88
GT Cable accessories up to 36 kV
TOOLS
Tools for medium voltage cables
Application
– Universal peeling tool for
peeling the extruded conductive layer
Advantages
– Cable Ø 34 – 60 mm
– Reduced slip-on strengths necessary
Peeling tool
for removing the extruded conductive layer
Cable Ø 34 – 60 mm
Stop ring set consisting of 8 pcs.
Content
Article Number
Set
pc.
Type
Complete
Spare part
270 137
270 139
1
1
WSSG 60
WSSGA 60
Jacket cutter
for removing the cable jacket
Cable Ø 32 – 70 mm
Content
Article Number
Set
pc.
Type
Complete
270 136
1
WSMT 70
Transport case for:
Jacket cutter type WSMT 70
and peeling tool type WSSG 60
Transport case with foam insert
Article Number
Set
Type
pc.
270 138
1
WSS 2
TOOLS
Remark
Jacket cutter and peeling tool for 110 kV cables on request.
GT Cable accessories up to 36 kV
89
TOOLS
Shrink burner
Advantages
– Very fast piezo ignition
– One keypress and the burner is ignited
– Gas supply only with pressed grip button and mounted burner
– Bayonet lock: quick exchange of the burner without tools
– Infinitely adjustable flame
– Turnable hose connection
Extensive accessories
Shrink-tool set type SWS 1
Content: Gas bottle, suspension hook, decanting nozzle, pressure controller, hose line length 4 m according to
DIN 4815, piezo handhold, 2 spanners SW 17 – 19, fine-pointed burner for precision solderings, hot-air burner,
shrink burner with 60° curve for shrink operations up to 150 mm diameter, in a practical and stable tool case.
Shrink-tool set, complete
Article Number
Type
270 000
SWS 1
Shrink-tool set Type SWS 2
Content: Security controller 1,5 bar/1,5 kg/h, hose line length 4 m according to DIN 4815, piezo handhold,
2 spanners SW 17 – 19, fine-pointed burner for precision solderings, hot-air burner, shrink burner with 60°
curve for shrink operations up to 150 mm diameter, in a practical and stable tool case.
Shrink-tool set
Article Number
Type
270 001
SWS 2
Completion of shrink-tool set
Article
Number
Type
Flat-jet top part
Shrink burner (for tubes up to Ø 50 mm)
Shrink burner (for tubes Ø > 150 mm)
Cyclone burner (for hard-soldering, max. Ø 22 mm, soft-soldering max. Ø 44 mm)
Cyclone burner (for hard-soldering, max. Ø 28 mm, soft-soldering max. Ø 60 mm)
270 002
270 004
270 005
270 006
270 007
SW
SW
SW
SW
SW
10
21
22
41
51
TOOLS
Spare parts
Spare parts for shrink-tool set
type SWS
Tool case
Security controller 1,5 bar /1,5 kg/h
Pressure controller 2,0 bar, R 3/8“ LH
Piezo handhold
Hose rupture protection 2,0 bar, on/off R 3/8“
Hose line DIN 4815, length 4 m
Gas bottle, content 425 g, empty
Fine-pointed burner 9 mm hard-soldering up to Ø 22 mm
Hot-air burner, shielded flame
Shrink burner for tubes Ø < 150 mm
Decanting nozzle
90
GT Cable accessories up to 36 kV
Article
Number
Type
270 008
270 009
270 010
270 011
270 012
270 013
270 014
270 019
270 020
270 021
270 022
SW
SW
SW
SW
SW
SW
SW
SW
SW
SW
SW
0
1
2
3
4
5
6
12
13
14
15
TOOLS
TOOLS
GT Cable accessories up to 36 kV
91
Index
92
Article-no. Type
Page
Article-no. Type
Page
010
010
010
010
010
010
010
010
160
160
160
160
160
160
160
160
160
160
160
160
160
160
210
210
210
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
13
12
12
12
13
13
13
12
221
221
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
231
231
231
231
231
231
231
231
231
231
231
231
231
231
231
231
231
231
231
231
54
54
21
23
23
23
23
23
23
23
23
23
23
23
21
21
22
22
22
22
22
22
22
22
22
28
28
28
29
29
28
29
28
29
28
30
30
31
30
31
30
31
30
31
30
520
GT-A-Ü 5 3/6
522
GT-A-5 3/6
523
GT-A-7 3/6
524
GT-A-8 3/6
625
GT-A-Ü 6 3/6
626
GT-A-Ü 7 3/6
627
GT-A-Ü 8 3/6
628
GT-A-6 3/6
005
HB 63
006
RT 71
007
KR 2
008
KR 10
009
RFS 0
010
RFS 1
011
RFS 2
012
RFS 3
013
RFS 4
014
RFS 5
015
RFS 6
016
Nr. 60
017.2 KG 2
017.20 KG 10
025
SIR 1
026
SIR 2
027
SIR 3
010
SST 25 – 10B
020
SST 40 – 16B
030
SST 65 – 25B
050
SST 100 – 40B
101
SSKF 20 – 7/1000
102
SSKF 20 – 7B
201
SSKF 30 – 10/1000
202
SSKF 30 – 10B
301
SSKF 36 – 12/1000
302
SSKF 36 – 12B
403
SSKF 45 – 18/1000
404
SSKF 45 – 18B
502
SSKF 54 – 25/1000
504
SSKF 54 – 25B
601
SSKF 60 – 30/1000
602
SSKF 60 – 30B
701
SSKF 76 – 40/1000
702
SSKF 76 – 40B
801
SSKF 100 – 50/1000 802
SSKF 100 – 50B
GT Cable accessories up to 36 kV
71
71
69
69
69
69
69
69
69
66
71
71
56
56
56
53
53
53
53
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
000
001
002
007
008
009
010
011
012
013
014
015
016
017
052
151
152
153
154
155
156
157
158
159
168
099
100
200
210
220
300
310
400
410
450
500
550
560
600
610
650
660
700
710
750
SSLB 25
SSLB 50
SMA 6/3 35 – 70
SIEVB 6/3 16 – 70/500
SIEVB 6/3 16 – 70/700
SIEVB 6/3 50 – 150/500
SIEVB 6/3 50 – 150/700
SIEVB 6/3 50 – 150/900
SIEVB 6/3 120 – 300/500
SIEVB 6/3 120 – 300/700
SIEVB 6/3 120 – 300/900
SIEVB 6/3 300 – 400/500
SIEVB 6/3 300 – 400/700
SIEVB 6/3 300 – 400/900
SMA 6/3 95 – 150
SMA 6/3 185 – 240
SIEV 6/3 16 – 70/500
SIEV 6/3 16 – 70/700
SIEV 6/3 50 – 150/500
SIEV 6/3 50 – 150/700
SIEV 6/3 50 – 150/900
SIEV 6/3 120 – 300/500
SIEV 6/3 120 – 300/700
SIEV 6/3 120 – 300/900
SIEV 6/3 16 – 70/350
SIEV 10/1 10 – 16
SIEV 10/1 16 – 50
SIEV 10/1 35 – 120
SIEV 10/1 25 – 95 SR
SIEV 10/1 70 – 150 SR
SIEV 10/1 95 – 300
SIEV 10/1 95 – 240 SR
SIEV 10/1 150 – 500
SIEV 10/1 185 – 400 SR
SIEV 10/1 400 – 1000
SFEV 10/1 10 – 16
SFEV 10/1 16 – 50
SFEV 10/1 25 – 95 SR
SFEV 10/1 35 – 120
SFEV 10/1 70 – 150 SR
SFEV 10/1 95 – 300
SFEV 10/1 95 – 240 SR
SFEV 10/1 150 – 500
SFEV 10/1 185 – 400 SR
SFEV 10/1 400 – 1000
Index
Article-no. Type
Page
Article-no. Type
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
233
233
233
233
233
233
233
233
233
233
233
233
233
43
43
44
43
44
43
44
44
43
43
50
50
51
50
51
51
50
51
50
45
46
45
46
45
46
45
46
45
52
52
52
52
37
37
37
37
37
37
37
37
37
37
37
37
38
233
233
233
233
233
233
233
233
233
233
233
240
240
240
240
240
240
241
241
241
241
241
241
241
241
241
241
241
241
241
241
241
241
241
242
242
242
242
242
242
242
242
242
242
242
000
010
020
100
110
150
160
170
200
250
300
350
360
400
410
420
450
460
500
600
610
650
660
700
710
750
760
800
905
915
925
935
100
101
102
200
201
202
300
301
302
400
401
402
500
SIEV 20/1 25 – 95
SIEV 20/1 16 – 50
SIEV 20/1 25 – 95 SR
SIEV 20/1 70 – 240
SIEV 20/1 35 – 150 SR
SIEV 20/1 120 – 400
SIEV 20/1 95 – 240 SR
SIEV 20/1 300 – 400 SR
SIEV 20/1 300 – 800
SIEV 20/1 500 – 1000
SIEV 30/1 25 – 50
SIEV 30/1 50 – 120
SIEV 30/1 35 – 95 SR
SIEV 30/1 95 – 240 SIEV 30/1 35 – 150 SR
SIEV 30/1 95 – 240 SR
SIEV 30/1 185 – 630 SIEV 30/1 185 – 400 SR
SIEV 30/1 400 – 1000
SFEV 20/1 16 – 50
SFEV 20/1 25 – 95 SR
SFEV 20/1 25 – 95
SFEV 20/1 35 – 150 SR
SFEV 20/1 70 – 240
SFEV 20/1 95 – 240 SR
SFEV 20/1 120 – 400
SFEV 20/1 300 – 400 SR
SFEV 20/1 300 – 800
SFEV 30/1 35 – 95 SR
SFEV 30/1 35 – 150 SR
SFEV 30/1 95 – 240 SR
SFEV 30/1 185 – 400 SR
SIEV 10/3 16 – 50/500
SIEV 10/3 16 – 50/700
SIEV 10/3 16 – 50/900
SIEV 10/3 35 – 95/500
SIEV 10/3 35 – 95/700
SIEV 10/3 35 – 95/900
SIEV 10/3 95 – 300/500
SIEV 10/3 95 – 300/700
SIEV 10/3 95 – 300/900
SIEV 10/3 240 – 500/500
SIEV 10/3 240 – 500/700
SIEV 10/3 240 – 500/900
SFEV 10/3 35 – 95/500
501
502
600
601
602
700
701
702
750
751
752
001
003
051
053
102
103
000
001
002
003
010
011
012
013
017
018
020
024
025
030
040
050
100
010
011
012
016
017
018
019
022
023
103
104
Page
SFEV 10/3 35 – 95/700
38
SFEV 10/3 35 – 95/900
38
SFEV 10/3 95 – 300/700 38
SFEV 10/3 95 – 300/900 38
SFEV 10/3 95 – 300/1200 38
SFEV 10/3 240 – 500/700 38
SFEV 10/3 240 – 500/900 38
SFEV 10/3 240 – 500/120038
SFEV 10/3 16 – 50/500
38
SFEV 10/3 16 – 50/700
38
SFEV 10/3 16 – 50/900
38
SMB 6/3 25 – 70
16
SMC 6/3 25 – 70
17
SMB 6/3 50 – 150
16
SMC 6/3 50 – 150
17
SMB 6/3 120 – 300
16
SMC 6/3 120 – 300
17
SM 10/3 25 – 95
32
SMB 10/3 25 – 95
33
SMB 10/3 95 – 240
33
SMB 10/3 240 – 500
33
SÜM 10/3/3 150 – 240
34
SÜM 10/3/3 25 – 95
34
SÜM 10/3/3 240 – 500
34
SÜM 10/3/3 95 – 150
34
SÜM 10/3/1 70 – 240
35
SÜM 10/3/1 240 – 500
35
SAM 10/3/1 25 – 95
36
SAM 10/3/1 50 – 120
36
SÜM 10/3/1 25 – 120
35
SAM 10/3/1 95 – 240
36
SAM 10/3/1 240 – 500
36
SM 10/3 95 – 240
32
SM 10/3 240 – 500
32
SMPB 6/3 16 – 50
18
SMPB 6/3 70 – 120
18
SMPB 6/3 120 – 300
18
SÜM 6/3/1 35 – 120
20
SÜM 6/3/1 120 – 300
20
SÜM 6/3/1 300 – 630
20
SÜM 6/3/3 25 – 120
19
SÜM 6/3/3 120 – 300
19
SÜM 6/3/3 300 – 630
19
SM 10/1 25 – 95 SV
27
SM 10/1 25 – 70
24
GT Cable accessories up to 36 kV
93
Index
Article-no. Type
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
94
105
106
107
112
113
114
115
116
117
120
121
125
126
130
131
135
136
140
141
145
146
153
154
155
156
157
158
159
161
162
163
165
166
170
171
175
176
301
310
311
320
321
330
331
340
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
SM
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
10/1
20/1
20/1
20/1
20/1
20/1
20/1
20/1
20/1
95 – 185
240 – 300
35 – 150 SV
25V – AL
25V – Cu
95 – 240 SV
35V – AL
35V – Cu
150 – 300 SV
50V – AL
50V – Cu
70V – AL
70V – Cu
95V – AL
95V – Cu
120V – AL
120V – Cu
150V – AL
150V – Cu
185V – AL
185V – Cu
400 – 500
625
240V – AL
240V – Cu
240 – 400 SV
500 SV
500 – 625 SV
300V – AL
300V – Cu
625 SV
400V – AL
400V – Cu
500V – AL
500V – Cu
625V – AL
625V – Cu
25 – 70
25 V – Al
25 V – Cu
35 V – Al
35 V – Cu
50 V – Al
50 V – Cu
70 V – Al
GT Cable accessories up to 36 kV
Page
Article-no. Type
Page
24
24
27
25
26
27
25
26
27
25
26
25
26
25
26
25
26
25
26
25
26
24
24
25
26
27
27
27
25
26
27
25
26
25
26
25
26
39
40
41
40
41
40
41
40
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
243
243
243
270
270
270
41
39
42
42
40
41
48
48
48
40
41
40
41
39
42
42
42
42
47
47
47
47
40
41
40
41
40
41
40
41
39
39
40
41
41
40
49
49
49
40
41
42
92
92
92
341
351
352
353
361
362
365
366
368
370
371
390
391
401
402
403
404
405
410
411
412
413
414
415
421
423
430
431
440
441
451
457
461
462
471
470
500
550
600
380
381
406
000
001
002
SM 20/1 70 V – Cu
SM 20/1 35 – 120
SM 20/1 25 – 95 – SV
SM 20/1 35 – 150 – SV
SM 20/1 95 V – Al
SM 20/1 95 V – Cu
SÜMD 20/3/1 50 – 120
SÜMD 20/3/1 120 – 300
SÜMD 20/3/1 16 – 50
SM 20/1 120 V – Al
SM 20/1 120 V – Cu
SM 20/1 185 V – Al
SM 20/1 185 V – Cu
SM 20/1 95 – 240
SM 20/1 95 – 240 – SV
SM 20/1 150 – 300 – SV
SM 20/1 300 – 400 – SV
SM 20/1 500 – SV
SAM 20/3/1 120 – 300
SAM 20/3/1 25 – 50
SAM 20/3/1 50 – 120
SAM 20/3/1 300 – 630
SM 20/1 240 V – Al
SM 20/1 240 V – Cu
SM 20/1 300 V – Al
SM 20/1 300 V – Cu
SM 20/1 400 V – Al
SM 20/1 400 V – Cu
SM 20/1 500 V – Al
SM 20/1 500 V – Cu
SM 20/1 300 – 500
SM 20/1 625 – 800
SM 20/1 630 V – Al
SM 20/1 630 V – Cu
SM 20/1 800 V – Cu
SM 20/1 800 V – Al
SM 30/1 50 – 150
SM 30/1 150 – 300
SM 30/1 240 – 630
SM 20/1 150 V – Al
SM 20/1 150 V – Cu
SM 20/1 625 – SV
SWS 1
SWS 2
SW 10
Index
Article-no. Type
Page
Article-no. Type
Page
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
300
300
300
300
300
300
300
300
300
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
89
89
89
89
89
89
89
89
89
89
89
90
90
90
90
90
89
91
91
91
91
64
60
59
61
65
62
62
66
66
300 053
07 065
07 066
07 102
07 103
07 104
07 105
07 106
07 107
07 108
07 109
07 110
07 111
07 112
07 118
07 119
07 120
07 121
07 122
07 123
07 124
07 125
07 126
07 127
07 128
07 129
07 130
07 131
07 132
07 133
07 134
07 135
07 136
07 137
07 138
07 139
07 140
07 141
07 142
07 143
07 144
07 145
07 150
07 151
07 152
66
73
73
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
83
83
83
004
005
006
007
008
009
010
011
012
013
014
019
020
021
022
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
136
137
138
139
035
038
039
040
041
048
050
051
052
SW 21
SW 22
SW 41
SW 51
SW 0
SW 1
SW 2
SW 3
SW 4
SW 5
SW 6
SW 12
SW 13
SW 14
SW 15
WSS
WSKO WSMT
WSMTU
WSMTO
WSMTV
WSMTM
WSMTL
WSMS1
WSMS2
WSMK WSKS
WSKSM
WSSG
WSSGA
WSSGM
WSMT 70
WSMT 70 WSSG 60
WSS 2
WSSGA 60
Nr. 35
Nr. 30
Nr. 40
Nr. 50
Nr. 70
MHB
MCM
Nr. 61
Nr. 61
Nr. 61
ZSDV 70
ZSDK 70
ZPKCU 16/8
ZPKCU 25/10
ZPKCU 35/10
ZPKCU 50/10
ZPKCU 70/12
ZPKCU 95/12
ZPKCU 120/12
ZPKCU 150/12
ZPKCU 185/16
ZPKCU 240/16
ZPKCU 300/16
ZPKCU 16/6
ZPKCU 16/10
ZPKCU 25/8
ZPKCU 25/12
ZPKCU 25/16
ZPKCU 35/8
ZPKCU 35/12
ZPKCU 50/8
ZPKCU 50/12
ZPKCU 50/16
ZPKCU 70/8
ZPKCU 70/10
ZPKCU 70/16
ZPKCU 70/20
ZPKCU 95/10
ZPKCU 95/16
ZPKCU 120/10
ZPKCU 120/16
ZPKCU 120/20
ZPKCU 150/10
ZPKCU 150/16
ZPKCU 150/20
ZPKCU 185/10
ZPKCU 185/12
ZPKCU 185/20
ZPKCU 240/12
ZPKCU 240/20
ZPKCU 300/20
ZPKAL 35/10
ZPKAL 50/10
ZPKAL 70/12
GT Cable accessories up to 36 kV
95
Index
Article-no. Type
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
96
153
154
155
156
157
158
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
270
271
272
273
274
275
276
277
278
279
290
291
292
293
294
295
297
298
Page
ZPKAL 95/12
83
ZPKAL 120/12
83
ZPKAL 150/12
83
ZPKAL 185/16
83
ZPKAL 240/16
83
ZPKAL 300/16
83
ZPKAL 16/8
83
ZPKAL 16/10
83
ZPKAL 25/8
83
ZPKAL 25/10
83
ZPKAL 25/12
83
ZPKAL 35/8
83
ZPKAL 35/12
83
ZPKAL 50/8
83
ZPKAL 50/12
83
ZPKAL 70/10
83
ZPKAL 70/16
83
ZPKAL 95/10
83
ZPKAL 95/16
83
ZPKAL 120/16
83
ZPKAL 150/16
83
ZPKAL 150/20
83
ZPKAL 185/12
83
ZPKAL 185/20
83
ZPKAL 240/12
83
ZPKAL 240/20
83
ZPKAL 300/20
83
ZPVA 36 25
76
ZPVA 36 35
76
ZPVA 36 50
76
ZPVA 36 70
76
ZPVA 36 95
76
ZPVA 36 120
76
ZPVA 36 150
76
ZPVA 36 185
76
ZPVA 36 240
76
ZPVA 36 300
76
ZSV 36 16 – 95
73
ZSV 36 50 – 150
73
ZSV 36 50 – 150/16 – 95 73
ZSV 36 95 – 240
73
ZSV 36 95 – 240/16 – 95 73
ZSV 36 120 – 300
73
ZSV 36 120 – 300/16 – 95 73
ZSV 36 120 – 300/95 – 24073
GT Cable accessories up to 36 kV
Article-no. Type
Page
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
73
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
76
76
76
76
76
76
76
296
299
300
301
302
303
304
305
306
307
308
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
340
341
342
343
344
345
346
ZSV 36 185 – 400
ZPVC 36 25
ZPVC 36 35
ZPVC 36 50
ZPVC 36 70
ZPVC 36 95
ZPVC 36 120
ZPVC 36 150
ZPVC 36 185
ZPVC 36 240
ZPVC 36 300
ZPVCT 36 25
ZPVCT 36 35
ZPVCT 36 50
ZPVCT 36 70
ZPVCT 36 95
ZPVCT 36 120
ZPVCT 36 150
ZPVCT 36 185
ZPVCT 36 240
ZPVCT 36 300
ZPVC 36 3525
ZPVC 36 5025
ZPVC 36 5035
ZPVC 36 7035
ZPVC 36 7050
ZPVC 36 9550
ZPVC 36 9570
ZPVC 36 12070
ZPVC 36 12095
ZPVC 36 15095
ZPVC 36 150120
ZPVC 36 185120
ZPVC 36 185150
ZPVC 36 240150
ZPVC 36 240185
ZPVC 36 300185
ZPVC 36 300240
ZPVAT 36 35
ZPVAT 36 50
ZPVAT 36 70
ZPVAT 36 95
ZPVAT 36 120
ZPVAT 36 150
ZPVAT 36 185
Index
Article-no. Type
Page
Article-no. Type
Page
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
76
76
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
78
78
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
81
81
81
81
347
348
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
ZPVAT 36 240
ZPVAT 36 300
ZPVA 36 3525
ZPVA 36 5025
ZPVA 36 5035
ZPVA 36 7035
ZPVA 36 7050
ZPVA 36 9550
ZPVA 36 9570
ZPVA 36 12070
ZPVA 36 12095
ZPVA 36 15095
ZPVA 36 150120
ZPVA 36 185120
ZPVA 36 185150
ZPVA 36 240150
ZPVA 36 240185
ZPVA 36 300185
ZPVA 36 300240
ZPAC 36 7035
ZPAC 36 7050
ZPAC 36 7070
ZPAC 36 9535
ZPAC 36 9550
ZPAC 36 9570
ZPAC 36 9595
ZPAC 36 12035
ZPAC 36 12050
ZPAC 36 12070
ZPAC 36 12095
ZPAC 36 120120
ZPAC 36 15070
ZPAC 36 15095
ZPAC 36 150120
ZPAC 36 150150
ZPAC 36 18570
ZPAC 36 18595
ZPAC 36 185120
ZPAC 36 185150
ZPAC 36 185185
ZPAC 36 240120
ZPAC 36 240150
ZPAC 36 240185
ZPAC 36 240240
ZPAC 36 300150
396
397
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
440
441
442
443
ZPAC 36 300185
ZPAC 36 300240
ZPKCUV 16/6
ZPKCUV 16/8
ZPKCUV 16/10
ZPKCUV 25/8
ZPKCUV 25/10
ZPKCUV 25/12
ZPKCUV 25/16
ZPKCUV 35/8
ZPKCUV 35/10
ZPKCUV 35/12
ZPKCUV 50/8
ZPKCUV 50/10
ZPKCUV 50/12
ZPKCUV 50/16
ZPKCUV 70/8
ZPKCUV 70/10
ZPKCUV 70/12
ZPKCUV 70/16
ZPKCUV 70/20
ZPKCUV 95/10
ZPKCUV 95/12
ZPKCUV 95/16
ZPKCUV 120/10
ZPKCUV 120/12
ZPKCUV 120/16
ZPKCUV 120/20
ZPKCUV 150/10
ZPKCUV 150/12
ZPKCUV 150/16
ZPKCUV 150/20
ZPKCUV 185/10
ZPKCUV 185/12
ZPKCUV 185/16
ZPKCUV 185/20
ZPKCUV 240/12
ZPKCUV 240/16
ZPKCUV 240/20
ZPKCUV 300/16
ZPKCUV 300/20
ZPKCUL 16/8
ZPKCUL 16/10
ZPKCUL 16/12
ZPKCUL 25/8
GT Cable accessories up to 36 kV
97
Index
98
Article-no. Type
Page
Article-no. Type
Page
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
82
82
82
82
82
82
82
82
82
82
82
82
82
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
480
481
482
483
484
485
486
487
488
489
490
491
492
ZPKCUL 25/10
ZPKCUL 25/12
ZPKCUL 35/8
ZPKCUL 35/10
ZPKCUL 35/12
ZPKCUL 50/8
ZPKCUL 50/10
ZPKCUL 50/12
ZPKCUL 70/8
ZPKCUL 70/10
ZPKCUL 70/12
ZPKCUL 70/16
ZPKCUL 95/10
ZPKCUL 95/12
ZPKCUL 95/16
ZPKCUL 120/10
ZPKCUL 120/12
ZPKCUL 120/16
ZPKCUL 120/20
ZPKCUL 150/10
ZPKCUL 150/12
ZPKCUL 150/16
ZPKCUL 150/20
ZPKCUL 185/10
ZPKCUL 185/12
ZPKCUL 185/16
ZPKCUL 185/20
ZPKCUL 240/12
ZPKCUL 240/16
ZPKCUL 240/20
ZPKCUL 300/16
ZPKCUL 300/20
ZPKCULV 16/8
ZPKCULV 16/10
ZPKCULV 16/12
ZPKCULV 25/8
ZPKCULV 25/10
ZPKCULV 25/12
ZPKCULV 35/8
ZPKCULV 35/10
ZPKCULV 35/12
ZPKCULV 50/8
ZPKCULV 50/10
ZPKCULV 50/12
ZPKCULV 70/8
GT Cable accessories up to 36 kV
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
ZPKCULV 70/10
ZPKCULV 70/12
ZPKCULV 70/16
ZPKCULV 95/10
ZPKCULV 95/12
ZPKCULV 95/16
ZPKCULV 120/10
ZPKCULV 120/12
ZPKCULV 120/16
ZPKCULV 120/20
ZPKCULV 150/10
ZPKCULV 150/12
ZPKCULV 150/16
ZPKCULV 150/20
ZPKCULV 185/10
ZPKCULV 185/12
ZPKCULV 185/16
ZPKCULV 185/20
ZPKCULV 240/12
ZPKCULV 240/16
ZPKCULV 240/20
ZPKCULV 300/16
ZPKCULV 300/20
ZPKALV 16/8
ZPKALV 16/10
ZPKALV 25/8
ZPKALV 25/10
ZPKALV 25/12
ZPKALV 35/8
ZPKALV 35/10
ZPKALV 35/12
ZPKALV 50/8
ZPKALV 50/10
ZPKALV 50/12
ZPKALV 70/10
ZPKALV 70/12
ZPKALV 70/16
ZPKALV 95/10
ZPKALV 95/12
ZPKALV 95/16
ZPKALV 120/12
ZPKALV 120/16
ZPKALV 150/12
ZPKALV 150/16
ZPKALV 150/20
Index
Article-no. Type
Page
Article-no. Type
Page
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
84
84
84
84
84
84
84
84
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
86
86
86
86
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
542
543
544
545
546
547
548
549
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
590
591
592
593
ZPKALV 185/12
ZPKALV 185/16
ZPKALV 185/20
ZPKALV 240/12
ZPKALV 240/16
ZPKALV 240/20
ZPKALV 300/16
ZPKALV 300/20
ZPKALL 16/8
ZPKALL 16/10
ZPKALL 25/8
ZPKALL 25/10
ZPKALL 25/12
ZPKALL 35/8
ZPKALL 35/10
ZPKALL 35/12
ZPKALL 50/8
ZPKALL 50/10
ZPKALL 50/12
ZPKALL 70/8
ZPKALL 70/10
ZPKALL 70/12
ZPKALL 95/8
ZPKALL 95/10
ZPKALL 95/12
ZPKALL 95/16
ZPKALL 120/10
ZPKALL 120/12
ZPKALL 120/16
ZPKALL 150/10
ZPKALL 150/12
ZPKALL 150/16
ZPKALL 185/10
ZPKALL 185/12
ZPKALL 185/16
ZPKALL 240/12
ZPKALL 240/16
ZPKALL 240/20
ZPKALL 300/12
ZPKALL 300/16
ZPKALL 300/20
ZPKALLV 16/8
ZPKALLV 16/10
ZPKALLV 25/8
ZPKALLV 25/10
594
595
596
597
598
599
600
601
602
603
605
604
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
ZPKALLV 25/12
ZPKALLV 35/8
ZPKALLV 35/10
ZPKALLV 35/12
ZPKALLV 50/8
ZPKALLV 50/10
ZPKALLV 50/12
ZPKALLV 70/8
ZPKALLV 70/10
ZPKALLV 70/12
ZPKALLV 95/8
ZPKALLV 95/10
ZPKALLV 95/12
ZPKALLV 95/16
ZPKALLV 120/10
ZPKALLV 120/12
ZPKALLV 120/16
ZPKALLV 150/10
ZPKALLV 150/12
ZPKALLV 150/16
ZPKALLV 185/10
ZPKALLV 185/12
ZPKALLV 185/16
ZPKALLV 240/12
ZPKALLV 240/16
ZPKALLV 240/20
ZPKALLV 300/12
ZPKALLV 300/16
ZPKALLV 300/20
ZPKACL 16/8
ZPKACL 16/10
ZPKACL 16/12
ZPKACL 25/8
ZPKACL 25/10
ZPKACL 25/12
ZPKACL 35/8
ZPKACL 35/10
ZPKACL 35/12
ZPKACL 35/16
ZPKACL 50/8
ZPKACL 50/10
ZPKACL 50/12
ZPKACL 50/16
ZPKACL 70/8
ZPKACL 70/10
GT Cable accessories up to 36 kV
99
Index
Article-no. Type
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
07
100
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
ZPKACL
Page
70/12
70/16
95/10
95/12
95/16
120/10
120/12
120/16
150/10
150/12
150/16
185/10
185/12
185/16
240/12
240/16
240/20
300/12
300/16
300/20
GT Cable accessories up to 36 kV
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
The herein given information corresponds to our actual knowledge and are according to our knowledge correct and
reliable. But they do not represent binding properties. The user of these products has to decide autonomously about
application in the provided range.
For delivered material which we also recognised as understandard, we will only bear material costs; all additional costs
for application must be refused.
GT Cable accessories up to 36 kV
101
GT ...
certainly the better connection
Tel. +49 77 41 92 25 - 0
Fax +49 77 41 92 25 - 29
[email protected]
www.gt-gmbh.com
102
GT Cable accessories up to 36 kV
TD105900E 2009-12
GT Elektrotechnische Produkte GmbH
Kupferschmidstraße 86
79761 Waldshut-Tiengen/Germany