: 2 COMP. POLYESTER FILLERS
tics
Pla
s
A lu
min
ium
Ga
lvan
ise
d
GR
P
Filler Range
S te
el
PROPERTIES
AND APPLICATION
2c
om
p. P
olye
ste
2c
r Fi
om
llers
p. E
pox
Wo
yF
od
iller
s
RANGE OF PRODUCTS
Hardening Time
(sandable)
depending on temperature and depth of fill
Can be stoved
up to
Colour
Fineness
Application Area
MULTI
Polyester
Multifunctional Filler
-
800C
beige
fine
Multi is a multi functional filler for use as a general purpose or fine filler.
It has excellent adhesion to many different surfaces. It spreads easily,
provides a porous free surface and is very easy to sand.
20 - 30 min.
MULTI Soft
Polyester
Multifunctional Filler
-
80 C
0
super
light grey fine
Multi Soft is a multi functional filler for use as a general purpose or fine
filler. It has excellent adhesion to many different surfaces. It provides a
finer surface compared to the Multi filler and is very easy to sand.
15 - 20 min.
MULTI Light
Polyester
Multifunctional Filler
-
80 C
0
beige
fine
Multi Light is an ultra lightweight polyester filler made using the latest
technology. A multi functional filler for use on many surfaces. Its formulation and absolutely tack free surface improve sanding by up to 40 %.
For filling deep dents on vehicle panels on automobiles, trucks, buses and
railway carriages.
Multi Silver Light is a multi functional filler for use as a general body filler
or fine filler. It spreads very easily and has excellent adhesion to sanded
metal surfaces especially galvanised sheet steel and aluminium. Excellent
sandability. For filling deep dents on vehicle panels on automobiles, trucks,
buses and railway carriages.
20 - 30 min.
MULTI Silver Light
Polyester
Multifunctional Filler
-
80 C
silver
fine
80 C
white
beige
super
fine
Elastic white/beige is a fine filler for filling small imperfections such as
scratches on vehicles. For use on our basic fillers.
0
15 - 20 min.
ELASTIC weiss/beige
Polyester
Fine Filler
- -
-
-
0
15 - 20 min.
SOFT
Polyester
Body Filler
- -
-
-
800C
beige
fine
Soft is a polyester filler for filling deep dents on vehicle panels on
automobiles, trucks, buses and railway carriages. Suitable for use on our
standard and glassfibre fillers.
80 C
grey
fine
Fill is a polyester filler for filling deep dents on vehicle panels on automobiles, trucks, buses and railway carriages.
80 C
silver
fine
Metallic is a polyester filler for filling deep dents on vehicle panels on
automobiles, trucks, buses and railway carriages.
fine
Steel is a specially formulated hard polyester filler for filling vehicle
edges. Also for filling deep dents, welding seams and as a replacement
for solder.
15 - 20 min.
FILL
Polyester
Body Filler
- - - -
- -
0
15 - 20 min.
METALLIC
Polyester
Body Filler
- - - -
- -
0
20 - 30 min.
STEEL
Polyester
Body Filler
- - - - - -
80 C
0
silver
15 - 20 min.
GLAS
Polyester
Fibreglass Reinforced Filler
- -
-
- -
80 C
green
fine
Glas is a polyester filler containing chopped strands of glassfibre which
provide added strength. For filling deep dents on vehicle panels on
automobiles, trucks, buses and railway carriages. Ideally for repairing
parts made of GRP.
80 C
black /
grey
fine
Flex is a filler for plastic surfaces and contours. Fills fine scratches on
plastic surfaces (bumpers/fenders).
80 C
beige
fine
Top is a polyester surface coating filler for treating small areas and
difficult contours such as angles, edges, curves etc.
0
20 - 30 min.
FLEX
Contour Filler
for Plastics
- - -
- - -
0
20 - 30 min.
TOP
Polyester Brushable Filler
- -
-
- -
0
20 - 30 min.
SPRAY
2K - Polyester
Spray Filler
SPRAY plus
2K - Polyester
Spray Filler
www.carsystem.org
- - -
-
- - -
For further information please refer to our technical data sheets!
As a basic principle infrared drying is not suitable for polyester fillers!
All our fillers need a reaction temperature of min. +5°C!
Carry out a test on aluminium and galvanised sheet steel surfaces.
200C 120-180 min.
60 min.
400C
0
30 min.
60 C
15 min.
800C
800C
fine,
nongrey
porous
very fine,
light grey nonporous
Spray is a polyester spray filler for filling superficial imperfections
(sanding marks, pinholes, blisters etc.) on vehicle panels on automobiles
and trucks.
Spray plus is a polyester spray filler for filling superficial imperfections
(sanding marks, pinholes, blisters etc.) on vehicle panels on automobiles
and trucks.
a trademark of