compact pop up display set up instructions
Frame Assembly
1
2
Prepare frame for assembly by locating
the blue buttons on top of the frame.
3
Stretch frame to size.
4
Lock connecting arms into place.
Attach hinged channel bar to the top red
button. Then connect channel bar to
bottom button.
*Tabletop frames have individual channel bars.
Graphic Application
5
Once the top and bottom of a channel bar
are connected, snap middle connectors
into place. Apply all channel bars.
3
Continue attaching the remaining
panels by hooking to blue buttons.
Make sure panel edges align with middle
line on channel bars.
1
6
Frame is assembled.
To attach panels, start with the left
curved endcap panel, hook panel on
blue button. Attach rest of panel to
magnetic channel bar.
1
4
Graphic application is complete.
Unit may be tipped forward for easy
light installation.
2
Attach right curved endcap panel.
compact pop up xcase packing instructions
Roll counter wrap
Frame, channel bar bag, and foam pad
Plastic divider panel
foam pad is added to bottom
of case with graphics only.
XCASE Lid
counter top
instructions
lights
Lights
packing instructions
1. Roll counter wrap
with plastic facing out
and place inside the
case against the outside
wall.
2. Individually roll
panels and place inside
case until all panels are
in the case and against
the outside wall.
(fabric to fabric/magnet
to magnet)
3. Roll and insert the
plastic divider panel.
4. Pack channel bar into
the storage bag. Then
release magnetic
locking arms to collapse
the frame.
5. Place foam pad in the
bottom of case and
pack frame and bag in
the center.
6. Counter top snaps
inside lid holding the
lights in place.
*Allow lights to cool
before packing.
10