Unit 2–A
Basic Tools and Equipment
Written Test
Name ______________________________________________________
Date _____________________________________ Score___________
Objective 1
Match the terms with their definitions.
1.
2.
3.
Cutting tool
Equipment
Hammer
4.
5.
6.
Hand tool
Pliers
Power tool
7.
8.
Puller
Wrench
_____ a. Tool used to help disassemble or remove tight-fitting parts (such as
pulleys and gears from shafts)
Objective 2
____
b. Small hand-held device operated only by manual effort for various
tasks
____
c. Large implements or machines used for various operations or
tasks; may be mechanically, electrically, or electronically operated
____
d. Any edged tool used to remove material from a workpiece
____
e. Tool used to pound or strike a blow to another object
____
f. Hand-held device operated with electrical, hydraulic, or air
assistance for various tasks
____
g. Small pinching tool used to hold small parts, bend thin metal, or cut
wire
Identify the following types of cutting tools. Write your answers in the blanks
provided.
a.
______________________
MAVCC—Diesel Technology: Introduction
b.
______________________
T 2A–9
Written Test
Objective 3
T 2A–10
c.
______________________
e.
______________________
d.
______________________
Identify the following types of hammers. Write your answers in the blanks
provided.
a.
______________________
c.
______________________
b.
______________________
MAVCC—Diesel Technology: Introduction
Written Test
Objective 4
Objective 5
Identify the following types of pliers. Write your answers in the blanks provided.
a.
______________________
b.
______________________
c.
______________________
d.
______________________
e.
______________________
f.
______________________
Identify the following types of pullers. Write your answers in the blanks provided.
a.
______________________
MAVCC—Diesel Technology: Introduction
b.
______________________
T 2A–11
Written Test
Objective 6
T 2A–12
c.
______________________
d.
______________________
e.
______________________
f.
______________________
Identify the following types of screwdrivers. Write your answers in the blanks
provided.
a.
______________________
b.
______________________
c.
______________________
d.
______________________
MAVCC—Diesel Technology: Introduction
Written Test
Objective 7
Objective 8
Identify the following types of wrenches. Write your answers in the blanks
provided.
a.
______________________
b.
______________________
c.
______________________
d.
______________________
e.
______________________
f.
______________________
Identify the following parts of a socket wrench set. Write your answers in the
blanks provided.
a.
______________________
b.
______________________
c.
______________________
d.
______________________
MAVCC—Diesel Technology: Introduction
T 2A–13
Written Test
Objective 9
T 2A–14
e.
______________________
f.
______________________
g.
______________________
h.
______________________
Identify the following basic power tools. Write your answers in the blanks
provided.
a.
______________________
b.
______________________
c.
______________________
d.
______________________
e.
______________________
f.
______________________
MAVCC—Diesel Technology: Introduction
Written Test
g.
Objective 10
______________________
h.
______________________
Identify the following basic shop equipment. Write your answers in the blanks
provided.
a.
______________________
b.
______________________
c.
______________________
d.
______________________
MAVCC—Diesel Technology: Introduction
T 2A–15
Written Test
Objective 11
e.
______________________
f.
______________________
g.
______________________
h.
______________________
Identify the following general shop tools and equipment. Write your answers in
the blanks provided.
a.
T 2A–16
______________________
b.
______________________
MAVCC—Diesel Technology: Introduction
Written Test
c.
______________________
d.
______________________
e.
______________________
f.
______________________
g.
______________________
h.
______________________
i.
______________________
j.
______________________
k.
______________________
l.
______________________
MAVCC—Diesel Technology: Introduction
T 2A–17
Written Test
Objective 12
Distinguish between correct and incorrect methods of using and maintaining
basic hand tools by placing:
•
•
C = next to correct methods of using and maintaining basic hand tools.
I = next to incorrect methods of using and maintaining basic hand tools.
_____ a. When using a hacksaw, make sure that the teeth point toward the
handle and that the blade is loose.
Objective 13
____
b. Always hit a surface with the edge of a hammer’s striking face.
____
c. Clean a file by using a file card.
____
d. Use pliers on the shank of a screwdriver to loosen a screw.
____
e. Dress dull cutting edges to the original shape and 60°-65° angle.
____
f. When using an adjustable wrench, adjust the wrench to fit the flat
surfaces of the nut.
____
g. Pliers may be used to remove damaged screws, but never use
pliers to loosen nuts and bolts.
____
h. Use a cold chisel with a mushroomed head.
____
i. Use a bar or pipe to extend a wrench handle.
____
j. When using an adjustable wrench, exert force against the large jaw
of the wrench (so that the large jaw is opposite the direction of
force).
Complete statements concerning safety guidelines to follow when using power
tools and equipment by filling in the blanks with the correct answers.
a. Always wear your _____________________ when using power tools and
equipment.
b. Remove _____________________ when operating power tools and
equipment.
c. Obey all _____________________ provided by the
manufacturer, plus any additional ones used by your shop.
equipment
d. Keep _____________________ in place on all equipment.
e. _____________________ to the supervisor/instructor any defective tools or
equipment.
f. _____________________ power equipment when not in use.
*Permission to duplicate this test is granted.
T 2A–18
MAVCC—Diesel Technology: Introduction