BALL
Load capacity up to 40kg
RIG
WHEEL
Made of stamped steel with single ball raceway
and a Chrome-Plated finish. Rivetted wheel axle.
NP - Polypropylene Hardness: 65 Shore D. (-20ºC to + 70ºC)
Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit
ratio. They present a good resistance to chemicals and moderate impacts.
Nominal working speed is up to 4km/h. Produced with recycled materials.
Wheel Options
Swivel Caster
Swivel Caster
with Brake
Reference
Reference
(mm)
(mm)
(pol)
GLBP 210 NP CR
GLBP 210 NP CR SL
50
47
1/4”
BP
UP
GEL
80 Shore A
90 Shore A
95 Shore A
Axle Type
KG
(bearing)
Plain Bearing
40
(mm)
w/o brake
(mm)
w/ brake FP
(mm)
65
47
62
Fittings/Accessories
Stem
Stem
Nylon Socket
Nylon Socket
Nylon Socket
3/8” X 50mm
ø7/16” X 50mm
ø7/16” X 20mm
ø10 X 28mm
ø12 X 28mm
ø15 X 32mm
E
EX
EL
ELT
ELSH
ELSK
ELSJ
Top Plate
Brake Option
42
NyloN SoCkeT FiTTiNg
Ø4.5
SIZE (mm)
ø38
ø30
ø25
40 x 40
32
Plate P
SL
43
Swivel Sections
P
Threaded Stem
3/8” X 25mm
42
Reference
Threaded Stem
32
Top Plate
REFERENCE
S1
S2
S3
S4