MLT Micro Cable
ID:
QM00
KABELOVNA Děčín Podmokly s.r.o.
Ústecká 840/33, 405 33 Děčín 5
Czech Republic
DIČ CZ26759993
tel.: +420 412 706 222
www.kabelovna.cz
A-DQ(ZN)2Y 8×1,5 max. 96F
13.8.2012
ver.4
This cable is certified for blowing into tube 14/10
Black HDPE outer jacket, UV stable
FRP Central strength member (OD 2,5 mm)
Gel filled PBT loose tube with optical fibres
Rip-Cord
Fibre colour coding
Order example
According to IEC 60304
1
2
3
4
5
6
Red
Green
Blue
Yellow
White
Grey
7
8
9
10
11
12
Brown
Violet
Turquoise
Black
Orange
Pink
Other fibre colour sequences available on request
Tube colour coding
1 Red
2 Green
3-8 White
in the case of lower number of fibres some tubes are replaced by uncoloured fillers
Other tubes colour sequences available on request
Fibre Type
SMF ITU-T G.657.A (AllWave-Flex)
SMF ITU-T G.657.B3 (AllWave-Flex)
SMF ITU-T G.655 C&D (TrueWave RS)
SMF ITU-T G.655.C&E G.656 (TrueWave Reach)
SMF ITU-T G.652.D - (LWP)
SMF ITU-T G.652.D (AllWave)
See the Fibre Specification sheet
Sheat Marking
Print colour
Print method
Print legend
White
INK-Jet
manufacturer’s name, job number, type of cable, length
marking @ 1 m intervals
Other print legends available on request
2100 m A-DQ(ZN)2Y 96E9/125G.652D jacket colour BLK, cable specification QM00
Mechanical and Environmental properties
Max. tensile strength
Crush resistance
Impact resistance
Min. bend radius
Repeat bending
Kink
Stiffness
Torsion
*E1A
*E3
*E4
*E11A
*E11B
*E6
*E10
*E17
*E7
Moisture resistance
Compound flow
Temperature range
*F5
*E14
*F1
installation
operation
storage
Cable informative nominal weight (calc.)
Standard put-up length
Packaging
Loose tube diameter
Outer jacket thickness
Cable outer diameter
1000 N
1500 N/10cm
3 impacts (w/10N.m)
80 mm
60 mm
100 cycles (100 mm /200N)
60 mm
0,10625 N.m2
10 cycles ±180° , 50 cm / 5 kg
10 cycles ±360° , 50 cm / 5 kg
passed
30 cm / 24h / 70°C passed
-15 °C to + 50 °C
-30 °C to + 70 °C
-40 °C to + 70 °C
40 kg/km
2100 m, 4100 m
Plywood drum
1,5 mm
0,5 mm
6,6± 0,4 mm
* IEC 60794-1-2
Note: When installing or assembly under temperature bellow 5°C cable has to be stock in
temp of 20°C at least 24h before installation.
Cable life time - minimum 30 years
KDP reserves the right to change the values in
​ this document without prior notice.KDP is not responsible for any action taken pursuant to this document.This document is property of KDP.
This document or any of its parts are not alowed to be redistributed without explicit consent of KDP.
Page 1/2
MLT Micro Cable
ID:
QM00
A-DQ2Y 8×1,5 max. 96F
Information contained in this data sheet is subject to change without prior notice. We recommend require the latest version of this specification
Page 2/2
KABELOVNA Děčín Podmokly s.r.o.
Ústecká 840/33, 405 33 Děčín 5
Czech Republic
DIČ CZ26759993
tel.: +420 412 706 222
www.kabelovna.cz
7.2.2012
ver.3