4” LED CYLINDER WITH DOWNLIGHT
TYPE :
PROJECT:
ORDER NUMBER:
Finish
LEDs
Dimming
Downlight
6307–2 ft.
6308 –3 ft.
6309–4 ft.
S– Silver
W–White
Red
Blue
SQ–RGB
BDMXMOD
B4MR16LED
6307–2 ft.
6308 –3 ft.
6309–4 ft.
S– Silver
W–White
W30
W35
W40
BDIM-W1
BDIM-W2
BDIM-W11
6300 - 4” LED
Model#
Example:
S
W35
BDIM-W2
B4MR16
Other Options:
☐ RD–remote driver
☐ BLA/RD–remote driver with ball aligner
☐ BLA–pipe mount
☐ RBRD–red braided cord (in inches):
☐ XP–extra pendant length (in inches):
☐ BTRAXW – Traxon Light Drive, white* (order separately) Enter quantity:
CONSTRUCTION
LEDs, COLOR
CANOPY
• W–white or S–silver, with matching cord.
Model LengthRed/BlueRGB
WattsWatts
6307
2 ft.
1836
6308 3 ft.
27
54
6309
4 ft.
36
72
LED DRIVERS
•Order BDIM ( W 1, W 2, or W11)for dimming; RD for
Specify LED color:
SQ –RGB sequencer
Red
Blue
• Matte white acrylic diffuser.
• cUL listed for dry locations only.
• Standard mount is 8 ft. adjustable power cord.
Order XP for extra pendant length.
• Hard stem also available. Order BLA .
remote in accessible ceilings or panels.
• Emergency not available. If EM is required,
use inverter (by others).
• Standard color LED options include Red and Blue,
as well as SQ –RGBsequencing, controlled with a
DMX 512 interface (BDMXMOD). Optional wall box
control offered separately (see Traxon, back page.)
• Color LED drivers and DMX modules mounted
inside 3” diameter, 19” long, tube housing at
ceiling. Mounts to all standard J-boxes.
• DMX wall box control options are available
(see Traxon, next page).
• White LED standard and dimming drivers
mounted inside 3” diameter, 12” long tube housing
at ceiling. Mounts to all standard J-boxes.
LEDs, color
• Flexible 5050 universal voltage LED
tape light.
• SQ –RGB =24V. Single color (Red or Blue)=12V.
LEDs, white
• Nichia Corp. NFSL757 linear board chips, available in
white color temperatures of W30 (3000º K),
W35 (3500º K), and W40 (4000º K); matching the
traditional CCT of existing incandescent, fluorescent,
and metal halide lamps.
*Ht.
LEDs, WHITE
ModelLengthWatts
6307
2 ft.
21
6308 3 ft.
42
6309
4 ft.
56
Specify LED color:
W30–White (3000º K)
W35–White (3500º K)
W40–White (4000º K)
28.4”/40.2”/52”
Driver canopy dimensions:
BURBANK,
ConfigurationHt.*
Standard12.0”
MR1616.3”
RGB20.3”
MR16 + RGB
21.8”
CALIFORNIA,
91505
W W W.
OPTIONAL DOWNLIGHT
•Order B4MR16LED.
• 9W max.
• Uses LED MR16, DC 12V, GU5.3
lamps (by others).
•Downlight does not dim.
DELRAY
4”
LIGHTING.
COM
MAR 2017
6309
LED
MR16
6309.W35 - 4 ft.
OPTIONS
B4MR16LED –4” downlight.
RGB INTERFACE CONTROL OPTIONS
9W max.
BDMXMOD
• Osram part no. OTDMXRGB supplied.
• DMX control interface for RGB LED.
• Provides DMX control with protocols that meet USITT DMX-512A
or DMX512 (DIN 56930-2). No converter is required. DMX controls
by others.
• A second 4-conductor control cable to fixture canopy is supplied.
TRAXON LIGHT-DRIVE RGB (order separately)
M R 16 L E D C P D I S T R I B U T I O N
2
90∞
1
2751
5502
CP DISTRIBUTION
524
180°
393
11005
• Standalone, wall-mounted
(12V power supply included)
DMX controller for RGB
LED that provides direct access
to fixtures.
• Tune color and brightness with
the Light-Drive wheel.
• Two sequence modes enable
continuous replay of all saved
color settings, as well as a preset
color-phase function, which can
be adjusted in replay speed.
• Fully dimmable white
mode button.
• See www.traxon-usa.com
for details.
50∞
8254
150°
BTRAXW –white controller
MOUNTING OPTIONS
30∞
120°
MOUNT OPTIONS
REMOTE DRIVER
262
262
60°
393
524
30°
Vertical plane thru Horiz. 0 – 180°
Horiz. cone thru Vert. angle 85°
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
107
93
83
75
68
62
56
52
48
45
42
107
87
73
63
55
48
43
38
35
31
29
NOTES
6309.W35 - 4 ft.
3500º K white LED
Total lumens: 5,977
CRI: 90.0
R9 ≥ 50.0
• 0–10V dimming to 10%.
•Utilizes 100W/24V, 0–10V
120/277 constant voltage driver.
• Use with 0–10V, purple/gray wire
analog dimmers; with low end
trim pot, and adjust low end
to above flicker threshold.
BDIM-W2
COEFFICIENTS
0
1
2
3
4
5
6
7
8
9
10
BDIM-W1
107
81
65
54
45
39
34
29
26
23
21
Pipe longer than 8 ft. will be shipped
in two pieces—one 8 ft. section plus
a second section for the balance—
supplied with a painted, threaded
pipe coupler, with set screws.
Ball aligner. Order BLA.
• 0–10V dimming to 1%.
• System utilizes 100W/24V,
120/277 constant voltage driver,
with the Eldo LIN211D1-LN
module.
• Required for use with digital
architecture/networking
systems like Acuity nLight,
Eaton Greengate, and similar
management systems.
0000000000000
2” x 2” x 23.5”
000000000000
000
2” x 2” x 23.5”
With ball aligner,
order BLA/RB.
Max. Wiring Distance (at full load)
BDIM-W11
• Lutron LD3096W24U
dimming driver module.
• 0.1% dimming and fade-to-off,
with Lutron dimming systems.
• For remote driver install only.
000000000000
000
0000000000000
Red braided
power cord.
Order RBRD.
Wire Size (AWG)
Distance (ft.)
18
16
14
12
10
18
29
46
71
120
NOTE: Multiple drivers must be
ACRYLIC DIFFUSER CLEANING
Warning: Do not clean with
ammonia based cleaners
(e.g. Windex®). Use only water
or cleaners specifically
formulated for cleaning plastics.
mounted no less than 4 inches
apart side-by-side, and 1 inch
apart end-to-end, to avoid
overheating.
MAR 2017
131
• For white LEDs only.
Install driver enclosure (supplied)
maximum 18 ft. from fixture;
must remain accessible.
Order RD.
00
90°
0
Order BLA mount for 3/8” IPS pipe.
Length must be specified.
Includes ball aligner canopy rated
for 75 lbs. and mounts to standard
J-boxes. Not for windy locations.
00
DIMMING DRIVERS
131
6300 SLIM TUBES – LED CANOPY DIMENSIONS
PENDANT STANDARD
With Downlight
5.5
With Downlight
5.1
PENDANT WITH DMX
No Downlight
5.1
15.7
14.3
12.8
5.5
No Downlight
19
No Downlight
PIPE MOUNT WITH SWIVEL CANOPY
RD – REMOTE DRIVER OPTION
With Downlight
5.5
Pendant
5.5
Pipe Mount
4.375
5.1
21.8
23.62
3.4
3.9
1.9
20.33
2
0.25
Remote Driver Housing
Adjustable bar hanger brackets are removable.
2