View in Browser
View as PDF
New Metrology Products from Mad City Labs
August 2014
Mad City Labs recently expanded its line of
nanopositioning systems for metrology
applications with several high speed, high
stability, low position noise, picometer precision
products.
The Nano-METZ is a compact z-axis
nanopositioning system designed for high speed
scanning and ultra-low noise characteristics for
demanding AFM and metrology applications.
The innovative design of the Nano- METZ
coupled with our proprietary PicoQ® sensor
technology yields a resonant frequency of
14.5kHz and a noise floor of 400 femtometers/
√Hz. The result: unparalled speed, response
and precision for the most demanding and
discerning metrology applications.
The Nano-MET2 and Nano-MET3 are ultra-low
noise, high precision nanopositioning systems
with picometer positioning resolution. Internal
position sensors utilizing proprietary PicoQ®
technology provide absolute, repeatable position
measurement under closed loop control. The
ultra-low position noise (4 picometers/√Hz in XY
and 400 femtometers/√Hz in Z) of these
nanopositioning systems make them ideal for
demanding metrology applications. With a
resonant frequency of 13.5kHz, the z-axis of the
Nano-MET3 offers ultra-fast response needed for
demanding AFM applications.
The Nano-MET10 and Nano-MET20 are compact,
single axis nanopositioning systems with
exceptional resonant frequency and low noise
characteristics. The Nano-MET10 and NanoMET20 have picometer positioning resolution.
Internal position sensors utilizing proprietary
PicoQ® technology provide absolute, repeatable
position measurement under closed loop
control.
The low noise characteristics and high resonant
frequencies make the Nano-MET10 and NanoMET20 ideal for demanding metrology
applications that require noise floors less than
10 picometers and high speed performance.
The Nano-HS3M is a high speed, XYZ precision
nanopositioning system with picometer
positioning resolution. Offering maximum
versatility, the Nano- HS3M is designed for
demanding metrology applications. Internal
position sensors utilizing proprietary PicoQ®
technology provide absolute, repeatable position
measurement under closed loop control. The
compact footprint, ultra-low noise
characteristics, and a Z-axis resonant frequency
of 13.5kHz make it ideal for metrology
applications that require picometer noise floors
and high speed performance.
Features
Applications
•
•
•
•
•
•
•
•
•
High speed
Ultra-low noise performance
High stability
Closed loop control
Picometer positioning resolution
Nano-METZ
Brochure
High speed, high resolution positioning
Metrology
AFM
SPM
Nano-MET Series
Brochure
Nano-MET10 &
Nano-MET20 Brochure
SPIE Optics and Photonics in San Diego, Booth 739
August 19-21, Mad City Labs will be showcasing the MMP series precision, stepper motor driven,
micropositioning systems; Nano-MTA series single axis and two axis piezoelectric mirror tip/tilt
actuators; Nano-OP Series versitile, high speed, single axis nanopositioners; and more. Stop by to see
us in Booth 739.
Product Catalog
Unsubscribe
You are receiving this message because you have
expressed interest in Mad City Labs products. If you
do not wish to receive future newsletters, please click
on the red unsubscribe link above or reply to this
message with "Unsubscribe from Metrology
Newsletter" in the subject.
Website
2524 Todd Drive
Madison, WI 53713 USA
USA +1 (608) 298-0855
Europe +41 (0)58 269 8017
[email protected]
www.madcitylabs.com
© 2014