Surfboard Blank Catalog
Mail: P.O. Box 486
Gardena, CA 90248
Phone: (310) 225-6774
Fax: (310) 225-6922
E-Mail: [email protected]
Web: www.usblanks.com
July 2012
WELCOME
Welcome to the Product Selection Catalog of US Blanks. We are dedicated to offering unmatched value
through quality, selection, and service. The products we offer represent the latest in foam technology and
design, both classic and contemporary.
Our mission at US Blanks is to establish a close partnership with our customers to produce the best
surfboard possible. We have a commitment to stay constantly on the leading edge of current design &
technology and to maintain the highest level of quality while offering a wide range of products for custom
ordered blanks, including an extensive variety of blank sizes, weights, stringers, rockers and glue colors.
If there is anything we can help you with at any time, please let us know. Our success will only be measured when we have satisfied your needs to the best of our abilities.
OUR COMPANY
The US Blanks team is comprised of former Clark Foam employees and leaders in the surf industry, with
over 135 years combined experience in making polyurethane foam surfboard blanks.
We chose to operate in California to provide the best possible service to our customers. Prior to establishing our factory we obtained all the permits required to operate a polyurethane plant in California. We
believe we are the only blank manufacturer that is 100% legal to operate in California. Due to the highly
profiled nature of using the various chemicals required to manufacture polyurethane foam, it was very
important to us that we exercised ALL environmental and safety precautions and requirements to ensure
the safety of our employees and neighboring areas, and to solidify the longevity of our company in the
marketplace. At US Blanks, we will continue to take all necessary steps to ensure our position at the
forefront of environmental and safety standards.
BLANK PICTURES
All blank pictures in this catalog are drawn to the actual scale of the blanks. The wire frame diagrams are
derived from the blanks and are drawn on a scale of 1:12 for blank sizes shorter than 8’0”, and 1:16 for
blank sizes 8’0” and longer. The rocker is taken from the “natural” rocker template and is also to scale.
These measurements should enable you to pick the optimum size blank for each board.
The measurements along side the blank picture showing Rocker, Thickness and Width are spaced 6”
and 12” apart starting at the nose and tail. The nose and tail rockers are measured from the bottom of
the blank to the bottom of the nose and bottom of the tail. You may find the actual measurements of the
blanks vary slightly. This is due to the use of mold release, unpredictable shrinkage during molding, rail
fill and rough rails. All of these factors can cause slight measurement variations from blank to blank.
Volume measurements are also listed for each blank size. These measurements are calculated using the
Shape 3D scan method created from each model. Shape 3D and AKU computer files for each blank size
are also available upon request. Please call our office for more details.
FOAM SELECTION
US Blanks manufactures a water blown, Toluene Diisocyanate based polyester polyurethane blank. We
feel this combination provides the best physical properties required by a surfboard, resulting in the strongest blank possible, and yields the best performance qualities. The quality, stability and consistency of a
TDI based polyurethane blank has long made it the choice of the majority of board builders.
While there are many formulations available for a TDI based blank, we believe our formulation provides
the optimum strength while maintaining ease of shaping and maximum flex. We are continuously fine
tuning our formulation to supply the shaper with a blank that exceeds industry standards for these characteristics.
US Blanks has also spent considerable time and resources exploring alternate technologies in surfboard
manufacturing. The rapidly progressing developments of epoxies have brought forth a very viable alternative for many board builders. As a result of our extensive research and development we now offer our
alternative product line of “Superfused Molded EPS Foam Blanks.” These blanks are currently produced
in 6 different sizes, 2 different densities (1.7 pcf and 2.0 pcf) as well as several different thicknesses giving
unlimited options to the shaper. Recognizing the importance of this technology we wanted to ensure that
our customers are provided with the very best EPS foam on the market. Our SUPERFUSED EPS product
line has set a new industry standard and we look forward to advancing and developing this technology
even further into the future. Our EPS molded blanks can be found immediately following the Polyurethane
Blank Section in this catalog.
We also offer EPS blanks cut from high quality block foam in two densities, offering an unlimited selection of sizes. Our block / billet material is the highest quality “surf specifec” material on the market and is
only available through US Blanks. Our stock sizes are listed toward the back of this catalog, In addition,
custom cut files may be submitted in either Shape 3D or AKU Shaper formats. Available stock densities
are 1.5 pcf and 2.0 pcf. with mimimum quantity. 1.0 pcf can also be custom ordered.
DENSITY COMPARISON
To provide a truly custom polyurethane blank, we offer several densities from which to choose. At this
time we offer most blank sizes in every weight, however not all weights will be stocked in all sizes. Sales
will dictate what sizes are stocked in what density.
Actual pounds per cubic foot of a given weight foam will vary with blank size due to mold compaction and
skin to core ratio. The comparisons listed are based on the difference in pounds of foam used to pour
each density and is an average among blank sizes.
The density of a blank will be identified by the color of the paint on the nose.
Densities are listed from lightest to heaviest:
ORANGE, approximately 12% - 13% lighter than BLUE. Currently only available in short boards.
RED, approximately 6% - 7% lighter than BLUE.
BLUE is considered our stock density and is the basis for comparison.
GREEN, approximately 9% - 10% heavier than BLUE
CLASSIC, approximately 30% - 32% heavier than BLUE. These blanks will be identified with a brown
tipped nose.
TOW-IN, approximately 205% heavier than BLUE. These blanks will be identified with a black tipped
nose.
BLANK SIZE AVAILABILITY
Our processing cycle limits the number of molds that can be in production at any given time. Any blank
size that is not in production relies on factory stocking to fill orders. There are a number of sizes which
remain in constant production; all others will rotate in and out of production based on inventory and order
levels.
When a mold is removed from production we try to stock for anticipated orders up to the time it should rotate back into production. Almost all blank sizes are inventoried in RED and BLUE densities, with most of
the short boards also inventoried in ORANGE and the longer boards also inventoried in GREEN. A limited
quantity of CLASSIC will be stocked for a select few long board sizes. TOW-IN density is by custom order
only. Our entire blank inventory is stocked unglued therefore all blanks are “glued to order”.
colored foam
US Blanks offers colored foam for stringers and full colored foam blanks.
Our colored stringer foam is made in Classic density and is available in stock colors of Blue, Red, Yellow,
Green, Black, Pink and Gray. We formulate our colors to be bright and bold. Occasionally we may have
additional colors available.
Colored blanks are available for all sizes and all densities on a custom order basis. We offer colored
blanks in the same colors as our stringer foam, and can also formulate any shade of the stock colors.
Custom colors are available for minimum quantity orders. Let your imagination run wild as we can create
unlimited colored blank combinations. Mix and match colors in any given blank - even with your parabolic
rails!
It may be possible to develop a proprietary custom color. Please contact our office for information.
STRINGER SELECTION
US Blanks currently offers five wood types for stringer selection: basswood, red cedar, balsa, colored 3
ply bass plywood, and three different combinations of 4mm unidirectional plywood.
Our in-house mill capabilities allow us to offer any thickness of bass or cedar wood stringer, including
wedges. Some limits are set by the length or width of wood available. Our red cedar comes 6” wide and
will not fit all rockers, and our plywood has a length limit of 8’1”.
Multiple stringer T-bands, off-set stringers, and Models A’s are all part of our custom stringer capability,
along with any conceivable straight cut.
Parabolic rail stringer configurations are also available in a variety of different blank sizes. Our standard
parabolic templates can be used in any of our shortboard sizes to suit your finished board dimensions and
requirements. For a list of our template outlines and configurations please refer to the parabolic specification pages at the end of this catalog.
ROCKER SELECTION
Everyone knows how important rocker is to the performance of a surfboard. US Blanks offers custom
rockers at no charge, including private rocker templates.
While our master plugs were designed with a Natural Rocker that fits a variety of designs, we know
that individual style and design will require adjustments.
At US Blanks we use the deck line to adjust rocker, and all adjustments are referenced to the Natural
Rocker. If desired we can adjust rocker to the bottom. Adjustments can be made from almost any
point on a blank and from one blank size to another. Unless instructed, all rocker adjustments will
be made from the center of the blank. If the adjustment is made from a point other than center, the
adjustment point will be part of the description. Rockers transferred from one blank size to another
will require a match point. Radical rocker adjustments may result in bumps or dips created in the deck
line.
Private rocker templates will be named and used only upon permission of the owner.
Rocker adjustments on block cut EPS blanks may be charged a slight fee, based on complexity of
file adjustment required.
QUALITY GUARANTEE
US Blanks will stand behind the quality of our blanks. If you receive a blank that has been determined to
be an inferior product, based on US Blanks quality standards, we will replace the blank. In addition, if that
blank has been shaped we will credit the customer with an additional blank OR a scheduled shaping fee.
In order to be eligible for either credit, the inferior blank must be returned to US Blanks. We will not cover
the costs of any work on the blank completed after the first notice of a problem. Refer to the US Blanks
Sales Policy for specific details.
Call (310) 225-6774 or visit www.usblanks.com
BLANK CODE DESCRIPTION
WEIGHT / DENSITY
COLOR CODE
SIZE
POURER’S NAME
77A
SAL
SURF
CUSTOMER’S MARK
+1/2N
1/8 BASS
ANY SPECIAL ROCKER /
STRINGERS
**
** NOTE: UNDER THE NAME/
STRINGER INFO ARE NUBMERS
USED INTERNALLY AT THE
FACTORY
123
MATERIAL BATCH #
LOGO
BLANK QUALITY
US
GLUE TEAM LEADMAN’S
INITIALS (ON RAIL)
*
Call (310) 225-6774 or visit www.usblanks.com
5'9"P
Overall Bottom Length: 5'10 1/4" (178.44 cm)
Tip-to-tip Deck Length: 5'9 5/8" (176.85 cm)
Maximum Width: 19 3/8"
(49.21 cm)
Maximum Thickness: 2 7/16"
ROCKER
"
4 3/4
12.07 cm
"
2 3/4
6.99 cm
"
1 1/2
3.81 cm
"
3
/4
1.91 cm
"
5
/16
0.79 cm
WIDTH
THICKNESS
—
"
3.02 cm
— 1 5/8 "
4.13 cm
—
2"
5.08 cm
— 2 5/16"
5.87 cm
(32.2 L)
— 3 1/2 "
13/16
2.06 cm
— 1 3/16"
Displacement: 1.14 ft³
(6.19 cm)
8.89 cm
6"
12 "
18 "
24 "
Introduced: April 2006
— 9 7/8 "
25.10 cm
Available Rockers: Refer to Rocker Catalog
— 13 11/16"
34.77 cm
— 16 7/16 "
41.75 cm
— 18 3/16"
46.20 cm
Shaper's Comments: This is an ideal “Grom”
blank with medium volume. It has an excellent
natural rocker which will also work very well in
the 6’0P and 6’2P matched from the nose. A
perfect hand shape blank that can also be used
on the machine.
— 2 7/16"
Center
"
— 2 5/16"
24 "
— 18 1/ 2 "
"
— 2 1/16"
18 "
— 17 1/16"
"
—
1 3/4
4.45 cm
"
12 "
— 14 13/16 "
"
—
1 3/8
3.49 cm
"
6"
— 11 9/16 "
"
—
15/16
2.38 cm
6.19 cm
1
/4
0.64 cm
1
/2
1.27 cm
13
/16
2.06 cm
1 3/8
3.49 cm
2
5.08 cm
5.87 cm
5.24 cm
"
Designed and shaped by:
— 19 3/8 "
49.21 cm
46.99 cm
43.34 cm
37.62 cm
29.37 cm
—5
"
1/2
13.97 cm
Timmy Patterson
5'10"RP
*
Call (310) 225-6774 or visit www.usblanks.com
Overall Bottom Length: 5'11 1/4" (180.98 cm)
Tip-to-tip Deck Length: 5'10 3/4" (179.71 cm)
Maximum Width: 24 7/8"
(63.18 cm)
Maximum Thickness: 2 15/16"
Displacement: 1.91 ft³
(7.46 cm)
(54.1 L)
Introduced: October 2008. Designed for the
ongoing fish revolution.
This follow through
design flows from the universally accepted 6’2”C
ROCKER
5
"
4 /8
11.75 cm
THICKNESS
—1
1/4
3.18 cm
WIDTH
"
8"
—
from 1994.
Rockers: Natural
20.32 cm
Classic Frye (-1”N24”)
2 5/8
6.67 cm
"
— 1 11/16"
6"
"
—2
3/16
"
"
—2
9/16
"
"
— 2 3/4 "
4.29 cm
"
14
13/16
12 "
— 19
5 16
18 "
— 22
3/16
24 "
— 23
7/8
37.62 cm
Small Frye (-1/2”N24”)
Island Lis (+7/16”N9” +1/8”T)
1 3/8
3.49 cm
5.56 cm
/
49.05 cm
"
Shaper's Comments: Versatile. Designed for
the modern hand shaper drawing on input from
5
/8
1.59 cm
6.51 cm
56.36 cm
"
each of the “Fish Fry” events attended (American,
Australian, European, as well as Japan). Modi-
1
/4
0.64 cm
6.99 cm
60.64 cm
"
fied and updated for machine use. Will easily net
5’10” deck measurement with high performance
rockers and thickness profiles. With much time
—2
"
15/16
7.46 cm
Center
— 24
7/8
63.18 cm
"
abroad put in at the line ups of Africa, South
America, elsewhere and beyond the the 5’10”RP
integrates input from many of surf designs most
traveled exponents minds. We enjoy this blank
1
/4
0.64 cm
"
"
1
/2
1.27 cm
"
—2
3/4
6.99 cm
—2
1/2
6.35 cm
"
24 "
18 "
— 23
3
/4
60.33 cm
— 22
1
/2
57.15 cm
"
removed for our vision of the high performance
"
"
—2
"
12 "
— 20
"
1 5/16
3.33 cm
"
—1
"
6"
— 17
"
"
—1
"
1 15/16
4.92 cm
3/4
4.45 cm
3
/4
45.09 cm
—
5/16
3.33 cm
Designed and shaped by:
3/
8
51.75 cm
fish. Inspired by the futuristic surfing of Daniel
“TOMO” Thomson.
7
/8
1.75 cm
3/16
5.56 cm
in the “Greenroom Guild” setting with 4” of center
14 "
35.56 cm
Rich Pavel
*
Call (310) 225-6774 or visit www.usblanks.com
6'0"P
Overall Bottom Length: 6'0 3/4" (184.15 cm)
Tip-to-tip Deck Length: 6'0 1/4" (182.88 cm)
Maximum Width: 20"
(50.80 cm)
Maximum Thickness: 2 1/2"
ROCKER
—
2 11/16"
—
11.75 cm
6.83 cm
1 1/2
WIDTH
THICKNESS
4 5 /8 "
7/8
"
—
2.22 cm
"
1 1/4
3.18 cm
4"
Displacement: 1.23 ft³
(6.35 cm)
(34.9 L)
10.16 cm
6"
— 101/16"
Introduced: January 2007
25.56 cm
"
— 1 5/8 "
12 "
— 141/16"
Available Rockers: Refer to Rocker Catalog
"
—
"
18 "
— 1613/16"
Shaper's Comments: This is a close to medium
3.81 cm
13
/16
2.06 cm
"
5
/16
0.79 cm
4.13 cm
2
5.08 cm
— 2 1/4 "
5.72 cm
24 "
35.72 cm
42.70 cm
— 18 9/16"
47.15 cm
tolerance blank excellent for Junior sizes. Adjusted
thickness flow in the nose and tail makes this a
perfect quick shape blank. The design was based
off the 6’2P.
—
20"
— 2 1/2 "
Center
"
— 2 5/16"
24 "
— 18 15/16"
"
— 2 1/8 "
18 "
— 17 11/16"
3
/4
1.91 cm
"
— 1 7/8 "
12 "
— 15 9/16 "
1 3/16"
— 1 7/16"
6"
— 12 3/8 "
1 11/16"
— 1"
6.35 cm
3
/16
0.48 cm
7
/16
1.11 cm
3.02 cm
4.29 cm
5.87 cm
5.40 cm
4.76 cm
3.65 cm
2.54 cm
Designed and shaped by:
50.80 cm
48.10 cm
44.93 cm
39.53 cm
31.43 cm
— 6 3/4 "
17.15 cm
Timmy Patterson
*
Call (310) 225-6774 or visit www.usblanks.com
6'0"R
Overall Bottom Length: 6' 0 1/2" (184.15 cm)
Tip-to-tip Deck Length: 5' 11 3/4" (182.25 cm)
ROCKER
4 7/16"
11.27 cm
2 7/16 "
6.19 cm
1 3/8
"
3.49 cm
3
/4
"
1.91 cm
/16 "
5
0.79 cm
WIDTH
THICKNESS
—
1
1/4
"
—
3.18 cm
"
5"
— 12 3/8 "
— 2 3/16"
12 "
— 16 3/8 "
— 2 9/16"
18 "
— 18 7/8 "
— 2 13/16 "
24 "
— 20 7/16"
1 5/8
4.13 cm
5.56 cm
6.51 cm
7.14 cm
(54.93 cm)
Maximum Thickness: 3"
(7.62 cm)
Displacement: 1.667 ft³
(47.2 L)
12.70 cm
6"
—
Maximum Width: 21 5/8"
Introduced: March 2011
31.43 cm
Available Rockers: Refer to Rocker Catalog
41.59 cm
47.94 cm
51.91 cm
Shaper's Comments:
Designed to be a versatile blank for shorter, wider,
relaxed rockered boards. Somewhere between
a fish and performance short board. Semi-flat
deck, and thicker on the ends should provide a
wide range of options.
—
3"
Center
— 21 5/8 "
7.62 cm
54.93 cm
"
— 2 13/16"
24 "
— 20 5/8 "
"
— 2 9/16"
18 "
— 19 1/4 "
15
/16
2.38 cm
"
— 2 1/4 "
12 "
— 17 1/8 "
1 7/16"
— 1 3/4 "
6"
— 13 3/4 "
"
— 1 1/4 "
1
/4
0.64 cm
1
/2
1.27 cm
3.65 cm
2 1/8
5.4 cm
7.14 cm
6.51 cm
5.72 cm
4.45 cm
3.18 cm
Designed and shaped by:
52.39 cm
48.90 cm
43.50 cm
34.93 cm
— 8 1/2 "
21.59 cm
Rusty Preisendorfer
10
*
Call (310) 225-6774 or visit www.usblanks.com
6'2"A
Overall Bottom Length: 6' 2 3/4" (189.87 cm)
Tip-to-tip Deck Length: 6' 2" (187.96 cm)
Maximum Width: 23 1/2"
(59.69 cm)
Maximum Thickness: 2 15/16"
ROCKER
"
THICKNESS
4 3/4
12.07 cm
1 1/ 8
2.86 cm
2 7/ 8
7.30 cm
"
1 5/8
4.13 cm
1 11/16"
"
4.29 cm
15
/16
2.38 cm
7
/16"
1.11 cm
8
"
"
Displacement: 1.95 ft³
20.32 cm
"
6"
2 1/8
5.40 cm
"
12 "
2 1/2
6.35 cm
"
18 "
21 1/4
53.97 cm
"
24 "
22 5/8
2 3/4
6.99 cm
(7.46 cm)
WIDTH
"
15 3/16
38.58 cm
19 "
(55.1 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
48.26 cm
"
"
57.47 cm
Shaper's Comments: This is my version of the
previous 6’2”C fish blank. I designed this one
as to be able to easily net a 6’2” by the bottom
measurement. Bottom rocker is a shorter version
of the natural rocker of the 6’9”A I made in 2002.
This blank can be ordered wider or narrower as to
2 /16"
15
7.46 cm
Center
23 1/2
"
59.69 cm
allow for stronger decks/rails near the perimeter
of the board outline, and less waste.
"
1/
4
0.64 cm
2 9/16
6.51 cm
"
2 5/16
5.87 cm
"
9
/16
1.43 cm
"
"
"
15
/16
2.38 cm
33.81 cm
1 5/16"
1 11/16"
3.33 cm
4.29 cm
1 13/16 "
1 1/4
3.18 cm
4.60 cm
2
24 "
"
18 "
20 1/2
52.07 cm
12 "
18 9/16
47. 15 cm
6"
16 1/8
40.96 cm
"
Designed and shaped by:
22 "
55.88 cm
"
"
12 1/2
"
31.75 cm
Pat Rawson
ALSO AVAILABLE IN
11
*
Call (310) 225-6774 or visit www.usblanks.com
6'2"P
Overall Bottom Length: 6' 2 1/2" (189.23 cm)
Tip-to-tip Deck Length: 6' 1 7/8"
Maximum Width: 20 1/2"
(52.07 cm)
Maximum Thickness: 2 1/2"
ROCKER
4 7/16"
/4
1.91 cm
2 1/ 2 "
1 1/4
3.18 cm
"
1 5/8
4.13 cm
6.35 cm
1 1/2
3.81 cm
"
13
/16
2.06 cm
3
/8
"
0.95 cm
"
"
2"
5.08 cm
2 1/4
"
"
11.27 cm
"
5.72 cm
(6.35 cm)
WIDTH
THICKNESS
3
(187.64 cm)
4 1/2
11.43 cm
Displacement: 1.31 ft³
10 "
6"
25.40 cm
12 "
35.56 cm
18 "
16 3/4
42.55 cm
24 "
14 "
"
18 5/8 "
47.31 cm
(37.2 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: Blank is designed for team
boards and production shaping. It is a shorter version of the 6’7”P, which has a little more thickness
in the nose and tail than the original. A medium
tolerance blank.
2 1/2
"
Center
20 1/ 2
52.07 cm
6.35 cm
"
"
5/
16
0.79 cm
"
2 3/8
6.03 cm
"
24 "
19 7/16
49.37 cm
5
/8
1.59 cm
"
2 3/16
5.57 cm
"
18 "
17 7/8
45.40 cm
1 1/16"
1 7/8
4.76 cm
"
12 "
15 7/16
39.21 cm
"
6"
11 7/8
30.16 cm
2.70 cm
1 5/8
"
4.13 cm
"
2 1/4
5.72 cm
1 3/8
3.49 cm
1"
2.54 cm
Designed and shaped by:
"
"
"
"
6 1/8
15.58 cm
Timmy Patterson
ALSO AVAILABLE IN
12
*
Call (310) 225-6774 or visit www.usblanks.com
6'3"EA
Overall Bottom Length: 6' 4 1/8"
(193.36 cm)
Tip-to-tip Deck Length: 6' 3 1/4"
(191.14 cm)
Maximum Width: 20 5/8"
ROCKER
"
5 1/2
13.97 cm
"
THICKNESS
WIDTH
1 1/4
3.18 cm
1 13/16"
1 11/16
4.29 cm
12 "
2"
18 "
"
15
/16
2.38 cm
"
7
/16
1.11 cm
"
6"
"
5.08 cm
"
"
9
/16
1.43 cm
"
19 "
"
24 "
19 1/4 "
"
18 "
17 11/16"
12 "
15 7/16"
6"
12 7/16"
"
4.13 cm
1
1 /4 "
3.18 cm
Designed and shaped by:
(39.2 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
"
43.50 cm
2 5/16
5.87 cm
1 5/8 "
"
17 1/8
Center
1 7/16"
2 1/16
5.24 cm
36.04 cm
2 9/16"
2 3/16
5.56 cm
Displacement: 1.38 ft³
14 3/16"
24 "
1 7/ 8
4.76 cm
3.65 cm
25.72 cm
"
15
/16
2.38 cm
(6.51 cm)
10 1/8 "
2 5/16
5.87 cm
6.51 cm
5/
16
0.79 cm
Maximum Thickness: 2 9/16"
"
4 1/ 8
10.48 cm
"
3
/4
1.91 cm
3 5/16
10.00 cm
4.60 cm
(52.39 cm)
Shaper's Comments: This is a thinner version
of the 6’4” EA.
48.26 cm
20 5/8 "
52.39 cm
48.90 cm
44.93 cm
39.21 cm
31.59 cm
8"
20.32 cm
Eric Arakawa
13
*
Call (310) 225-6774 or visit www.usblanks.com
6'4"EA
Overall Bottom Length: 6' 4 1/4" (193.66 cm)
Tip-to-tip Deck Length: 6' 3 1/2" (191.14 cm)
Maximum Width: 20 5/8"
THICKNESS
"
5 1/2
13.97 cm
WIDTH
"
—
15
/16
2.38 cm
3 5/16
8.41 cm
1 5/16
3.33 cm
6"
1 13/16"
1 3/4 "
12 "
"
4.60 cm
"
15
/16
2.38 cm
"
7
/16
1.11 cm
"
"
2 1/8
5.40 cm
"
2 7/16
6.19 cm
18 "
24 "
Maximum Thickness: 2 3/4"
(6.99 cm)
"
4 1/8
10.48 cm
Displacement: 1.49 ft³
(42.3 L)
—10 1/ 8 "
25.72 cm
4.45 cm
(52.39 cm)
Introduced: July 2006
— 14 3/16 "
36.04 cm
— 17
Available Rockers: Refer to Rocker Catalog
"
1
/8
43.50 cm
Shaper's Comments: Designed to be a versatile
blank for boards 6’2” and under. I added a little
— 19 "
48.26 cm
nose width to accommodate most modern full
nose short boards.
"
Center
2 3/4
6.99 cm
— 20
"
5
/8
52.39 cm
"
2 1/2
6.35 cm
"
24 "
— 19 1/4"
"
2 5/16"
18 "
— 17 11/16 "
2"
12 "
— 15
"
6"
— 12
"
5
/16
0.79 cm
9
/16
1.43 cm
"
15
/16
2.38 cm
5.87 cm
5.08 cm
"
11
1 /16"
"
1 5/16"
1 7/16
3.65 cm
2 1/16
5.24 cm
4.29 cm
3.33 cm
Designed and shaped by:
48.90 cm
44.93 cm
7/
16
39.21 cm
7
/16
31.59 cm
—
8"
20.32 cm
Eric Arakawa
ALSO AVAILABLE IN
14
*
Call (310) 225-6774 or visit www.usblanks.com
6'5"A
Overall Bottom Length: 6' 5 1/2"
(196.85 cm)
Tip-to-tip Deck Length: 6' 4 7/8"
(195.26 cm)
Maximum Width: 23 1/2"
ROCKER
THICKNESS
—
1
3 3/16"
—
1 11/16"
12.86 cm
8.10 cm
1 7/8
"
4.76 cm
1 1/16"
2.70 cm
9
/16"
1.43 cm
1/4
3.16 cm
WIDTH
"
5 /16"
1
—
7
1/2
"
— 14 3/4 "
— 2 3/16"
12 "
— 18
2 5/8 "
18 "
— 21 1/8 "
"
24 "
— 22 1/2 "
5.56 cm
—
6.67 cm
—2
7/8
7.30 cm
Maximum Thickness: 3 1/8"
(7.94 cm)
19.05 cm
6"
4.29 cm
(59.69 cm)
Displacement: 2.15 ft³
(60.9 L)
37.47 cm
7/8
47.94 cm
"
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
53.66 cm
57.15 cm
Shaper's Comments: This is my longer version
of the previous 6’2”C fish blank. I designed this
one as to be able to easily net a 6’5” by the bottom
measurement. Bottom rocker is a shorter version
of the natural rocker of the 6’9”A I made in 2002.
—
3 1/8 "
Center
— 23 1/2 "
59.69 cm
7.94 cm
I basically “shrunk down” the 6’9”A for this mold
design. This blank can be ordered wider or narrower as to allow for stronger decks/rails near the
perimeter of the board outline, and less waste.
"
— 2 11/16"
24 "
— 21 3/4 "
9
/16
1.43 cm
"
—
"
18 "
— 20 1/4 "
7
/8
2.22 cm
"
—
"
12 "
— 18 3/8 "
1 5/16"
—
"
6"
—
1 3/ 4 "
—
"
5
/16
0.79 cm
3.33 cm
4.45 cm
6.83 cm
2 1/2
6.35 cm
2 1/8
5.40 cm
1 3/4
4.45 cm
1 1/2
3.81 cm
Designed and shaped by:
55.25 cm
51.44 cm
46.67 cm
16 "
40.64 cm
— 12 1/2 "
31.75 cm
Pat Rawson
ALSO AVAILABLE IN
15
*
Call (310) 225-6774 or visit www.usblanks.com
Overall Bottom Length: 6' 5 1/2" (196.85 cm)
New “R” series
available now!
ROCKER
4 11/16"
11.91 cm
1
3/8
Tip-to-tip Deck Length: 6' 4 3/4" (194.95 cm)
Maximum Width: 21 3/4"
WIDTH
THICKNESS
6'5"R
Maximum Thickness: 3 1/4"
15.88 cm
3.49 cm
6.51 cm
1
"
15/16
4.92 cm
(8.26 cm)
6 1/4 "
"
Displacement: 1.98 ft³
2 9/16"
(55.25 cm)
6"
(56.0 L)
"
13
1/8
16
7/ 8
33.34 cm
Introduced: April 2011
9
"
1 /16
3.97 cm
7
/8
"
2.22 cm
2 3/8 "
6.03 cm
12
"
42.86 cm
Available Rockers: Refer to Rocker Catalog
2
/4 "
3
18 "
6.99 cm
19 1/4 "
48.90 cm
Shaper's Comments:
3
/8
"
0.95 cm
3"
24 "
7.62 cm
20
3/4
"
52.71 cm
This is the larger version of the 6’0R.
Designed to be a versatile blank for shorter, wider,
relaxed rockered boards. Somewhere between
a fish and a performance short board. Semi-flat
3 1/ 4 "
Center
8.62 cm
20 5/8
52.39 cm
"
18 "
19 1/8
48.58 cm
2 7/16
6.19 cm
"
12 "
2"
6"
"
2 13/16
7.14 cm
"
11
/16
1.75 cm
"
1 7/16
3.65 cm
"
2 1/4
5.72 cm
5.08 cm
"
1 3/8
3.49 cm
Designed and shaped by:
deck, and thicker on the ends should provide a
wide range of options.
"
24 "
3 1/16
7.78 cm
9
/16
1.43 cm
55.25 cm
"
"
1
/4
0.64 cm
21 3/4 "
"
17 "
43.18 cm
14 "
35.56 cm
"
9 1/4
23.50 cm
Rusty Preisendorfer
16
*
Call (310) 225-6774 or visit www.usblanks.com
6'6"EA
Overall Bottom Length: 6' 6 1/8" (198.44 cm)
Tip-to-tip Deck Length: 6' 5 3/8" (196.22 cm)
Maximum Width: 21 1/4"
ROCKER
5 /16"
5
13.49 cm
3 5/16"
WIDTH
THICKNESS
4 1/4 "
1"
2.54 cm
1 3/8 "
6"
10 9/16"
"
Displacement: 1.65 ft³
3.49 cm
1 7/8 "
1 7/ 8
4.76 cm
12
14 5/8
2 1/4 "
18 "
17 5/8
44.77 cm
24 "
19 9/16"
"
1 1/16
2.70 cm
1
/2
"
1.27 cm
5.72 cm
2 9/16"
6.51 cm
"
Center
2 15/16
7.46 cm
"
49.69 cm
19 3/4 "
"
2 3/8
6.03 cm
"
18 "
18 1/8
46.04 cm
1 1/16
2.70 cm
"
2 1/16
5.23 cm
"
12 "
15 3/4 "
1 9/16
3.97 cm
"
1 5/8
4.13 cm
6"
12 1/2 "
"
1 5/16
3.33 cm
"
Designed and shaped by:
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: This fills the gap between
the 6’3” EA and the 6’9” EA.
53.98 cm
24 "
2 3/16
5.56 cm
(46.7 L)
21 1/4 "
"
"
"
37.15 cm
2 5/8
6.67 cm
5
/8
1.59 cm
(7.46 cm)
26.83 cm
"
5
/16
0.79 cm
Maximum Thickness: 2 15/16"
10.80 cm
8.41 cm
4.76 cm
(53.98 cm)
50.17 cm
"
40.01 cm
31.75 cm
"
7 1/2
19.05 cm
Eric Arakawa
ALSO AVAILABLE IN
17
*
Call (310) 225-6774 or visit www.usblanks.com
6'7"P
Overall Bottom Length: 6' 7 1/8"
(200.66 cm)
Tip-to-tip Deck Length: 6' 6 1/2"
(198.76cm)
Maximum Width: 21 1/2"
ROCKER
1
5 /4
"
13.34 cm
THICKNESS
3/4
1 1/8
"
2.86 cm
"
9
/16
1.43 cm
(6.99 cm)
11.11 cm
"
6"
10 1/4"
Displacement: 1.54 ft³
1 9/16
3.97 cm
"
12 "
14 1/2 "
Introduced: July 2006
2"
18 "
17 3/8"
Available Rockers: Refer to Rocker Catalog
24 "
19 7/16"
Shaper's Comments: Blank is designed for team
1 15/16"
4.92 cm
Maximum Thickness: 2 3/4"
4 3/8 "
1.91 cm
1 1/8
2.86 cm
8.26 cm
WIDTH
"
"
3 1/4
(54.61 cm)
5.08 cm
"
2 5/16
5.87 cm
(43.6 L)
26.04 cm
36.83 cm
44.13 cm
49.37 cm
boards and production shaping. It has a little more
thickness in the nose and tail than the original
6’6”P. A medium tolerance blank.
2 3/4
6.99 cm
"
Center
"
24 "
19 15/16"
21 1/2 "
54.61 cm
"
2 7/16
6.19 cm
3
/4
1.91 cm
"
2 3/16
5.56 cm
"
18 "
18 3/8 "
1 3/16"
1 13/16"
12 "
15 7/8
40.32 cm
6"
12 1/2"
3
/8
0.95 cm
3.02 cm
1 3/4
"
4.45 cm
2 3/8
"
6.03 cm
4.60 cm
"
1 3/8
3.49 cm
1"
2.54 cm
Designed and shaped by:
50.64 cm
46.67 cm
"
31.75 cm
"
6 3/4
17.15 cm
Timmy Patterson
18
*
Call (310) 225-6774 or visit www.usblanks.com
6'8"A
Overall Bottom Length: 6' 7 3/4"
68A’X’ also available
+ 3/8” thicker
Tip-to-tip Deck Length: 6' 7"
Maximum Width: 21 7/8"
(202.57 cm)
(200.66 cm)
(55.56 cm)
Maximum Thickness: 2 15/16"
(7.46 cm)
“X” VERSION AVAILABLE
ROCKER
"
5 5/16
13.49 cm
3
"
7.62 cm
1 5/8
"
4.13 cm
THICKNESS
WIDTH
1"
"
2.54 cm
1 11/16"
4.29 cm
2 3/16"
5.56 cm
6"
12 "
+3/8” THICKER (3 5/16" CENTER)
3 3/4
9.53 cm
Displacement: 1.95 ft³
10 7/8"
Available Rockers: Refer to Rocker Catalog
(55.3 L)
Introduced: July 2006
27.62 cm
"
15 9/16
39.53 cm
Shaper's Comments:
I have listened to many people over the years on this one
blank. This newly made 6’7”A blank was lengthened to net
"
7
/8
2.22 cm
2 1/2 "
6.35 cm
18 "
18 3/8 "
a 6’7” bottom length. I re-designed the rail shape for less
46.67 cm
waste and stronger foam, and I also widened the nose
"
7
/16
1.11 cm
2 3/4
"
6.99 cm
24 "
20 1/8 "
@ 12” by 2’ 1/2”, the wide point by 1/2”, and the tail @
51.12 cm
12” by 1”, as to be a more useful blank in this size range.
The new natural rocker in this mold design is the popular
6’7”A +1/2” nose, +1/4” tail. This rocker being shaped in
instead of glued up, will allow for a much more accurate
"
15/16
7.46 cm
2
Center
"
21 7/8
55.56 cm
finished rocker, due to no “spring back”. I have the old
6’7”A natural rocker if anyone still wants it. All the “A” series
blanks are designed to take the majority of thickness off
the bottom, leaving small adjustments in the nose and tail
rocker and their thicknesses. This blank can be ordered
5
/16"
2
/16"
11
24 "
20 1/16"
0.79 cm
6.83 cm
9
/16
1.43 cm
"
2 1/2 "
18 "
18 9/16"
"
2 1/4 "
12 "
16 3/4 "
"
1 7/8
"
6"
13 7/8 "
"
1 1/2
"
7
/8
2.22 cm
1 1/4
3.18 cm
1 3/4
4.45 cm
6.35 cm
5.72 cm
4.76 cm
the perimeter of the board outline, and less waste.
47.15 cm
42.55 cm
35.24 cm
"
9 1/2
24.13 cm
3.81 cm
Designed and shaped by:
50.96 cm
wider or narrower as to allow for stronger decks/rails near
Pat Rawson
19
*
Call (310) 225-6774 or visit www.usblanks.com
6'8"P
Overall Bottom Length: 6' 7 1/2"
(201.93 cm)
Tip-to-tip Deck Length: 6' 6 3/4"
(200.03 cm)
Maximum Width: 21 3/8"
ROCKER
(54.29 cm)
WIDTH
THICKNESS
4 1/2
11.43 cm
Maximum Thickness: 2 3/4"
6"
10 1/2 "
Displacement: 1.57 ft³
1 11/16"
12 "
14 1/ 2"
Introduced: July 2006
5 1/16"
12.86 cm
7/
8
2.22 cm
3 1/16"
1 3/16"
7.78 cm
3.02 cm
1 13/16
4.60 cm
"
"
"
1.69 cm
(6.99 cm)
(44.4 L)
26.67 cm
36.83 cm
1"
2 1/16"
17 1/4 "
Available Rockers: Refer to Rocker Catalog
5.24 cm
18 "
2.54 cm
"
2 3/8"
24 "
19 1/4 "
Shaper's Comments: Blank is designed for team
1
/2
1.27 cm
6.03 cm
43.82 cm
48.90 cm
boards and production shaping. It has slightly
adjusted dimensions from the 6’7”P. A medium
tolerance blank.
"
3/ 4
6.99 cm
2
Center
21 3/ 8 "
54.29 cm
"
2 7/16
6.19 cm
"
24 "
19 3/4 "
"
2 3/ 16 "
18 "
18 3/16"
1 1/8
2.86 cm
"
1 7/ 8
4.76 cm
"
12 "
15 11/16"
1 5/8 "
1 1/ 2
3.81 cm
"
6"
12 1/16"
3
/8
0.95 cm
11
/16
1.75 cm
4.13 cm
"
2 3/16
5.56 cm
5.56 cm
1"
2.54 cm
Designed and shaped by:
50.17 cm
46.19 cm
39.85 cm
30.64 cm
"
6 1/ 2
16.51 cm
Timmy Patterson
20
*
Call (310) 225-6774 or visit www.usblanks.com
6'8"RP
Overall Bottom Length: 6' 9 1/2" (207.01 cm)
Tip-to-tip Deck Length: 6' 8 3/4" (205.11 cm)
Maximum Width: 25 1/8"
Maximum Thickness: 3 "
Displacement: 2.25 ft³
ROCKER
"
5
12.70 cm
3 1/16"
7.78 cm
THICKNESS
WIDTH
7 1/2 "
— 1 1/4 "
19.05 cm
3.18 cm
— 1 11/16"
6"
14 5/16"
4.29 cm
36.35 cm
"
—
2 1/8
5.40 cm
"
12 "
18 9/16 "
/16"
—
2 7/16"
18 "
21 1/ 2 "
—
2 11/16"
24 "
23 3/8 "
1 3/4
4.45 cm
15
2.38 cm
/16"
7
1.11 cm
6.19 cm
6.83 cm
47.15 cm
54.61 cm
59.37 cm
(63.82 cm)
(7.62 cm)
(63.8 L)
Introduced: November 2008. Very versatile.
Excellent for contemporary Lis-Fish. Big brother to
5’10”RP. Modified / updated for machine use.
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: Designed with input from
some of surfiing’s best designs minds the 6’8”RP
is influenced by a universal rocker with profiles
that are integrated and timeless. The 6’8”RP will
play an important role in the current generation of
hand shapers emerging not only as technicians, but
also designers at the genesis of what is possible in
their craft. This in turn will set a new precendent
for the next era of surfing. Paying close attention
—
3"
Center
25
1/ 8
"
63.82 cm
7.62 cm
to and working with all the elements in design in
the 6’8”RP opens the door to a new level of performance and self expression for all shapers and
designers. Will cleanly net a 6’8” deck measurement with high performance rockers and thickness
2 3/4 "
24 "
23 3/8 "
"
18 "
21 15/16"
"
12 "
"
6"
"
—
5
/8
1.59 cm
"
—
2 1/2
1 1/16
2.70 cm
"
—
2 3/16
5.56 cm
1 1/2
3.81 cm
"
—
1 13/16
4.60 cm
2 1/8
5.40 cm
"
—
1 7/16
3.65 cm
3
/8
0.95 cm
6.96cm
6.35 cm
on “the state of the art Lis - Fish”.
55.72 cm
20 "
50.80 cm
17 3/8 "
44.13 cm
13 3/4 "
"
Designed and shaped by:
59.37 cm
profiles. Inspired by the modern surfing of Rasta
34.93 cm
Rich Pavel
21
*
Call (310) 225-6774 or visit www.usblanks.com
6'9"EA
Overall Bottom Length: 6' 9"
(205.74 cm)
Tip-to-tip Deck Length: 6' 8"
(203.20 cm)
Maximum Width: 21 5/16"
ROCKER
THICKNESS
"
4"
"
15/16
2.38 cm
3 7/16
8.73 cm
"
1 3/8
"
6"
10 1/8"
2"
1 7/8
"
12 "
14 1/8 "
"
2 3/16"
18 "
17 1/16"
"
2 1/2
"
24 "
19 1/8"
5 9/16
14.13 cm
5.08 cm
1 1/8
2.86 cm
9
/16
1.43 cm
3.49 cm
4.76 cm
5.56 cm
6.35 cm
(54.13 cm)
WIDTH
10.16 cm
25.72 cm
35.88 cm
43.34 cm
48.58 cm
Maximum Thickness: 2 15/16"
Displacement: 1.71 ft³
(7.46 cm)
(48.3 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: This blank is designed to
yield most modern short board designs. The
thicker nose and tail give it added versatility for
machining. I designed the rocker and foil to accommodate low and full rocker designs.
"
Center
"
2 5/8 "
24 "
19 9/16"
"
2 3/8 "
18 "
17 7/8 "
2"
12 "
15 5/ 8"
"
1 5/8 "
6"
12 3/8 "
"
1 1/8 "
2
15/16
7.46cm
7
/16
1.11 cm
3
/4
1.91 cm
1 3/16
3.02 cm
1 3/4
4.45 cm
2 1/ 2
6.35 cm
"
6.67 cm
6.03 cm
5.08 cm
4.13 cm
2.86 cm
Designed and shaped by:
21
5/16
"
54.13 cm
49.69 cm
45.40 cm
39.69 cm
31.43 cm
7”
17.78 cm
Eric Arakawa
ALSO AVAILABLE IN
22
*
Call (310) 225-6774 or visit www.usblanks.com
6'10"A
Overall Bottom Length: 6' 10" (208.28 cm)
Tip-to-tip Deck Length: 6' 9 1/2" (207.01 cm)
ROCKER
5"
12.70 cm
"
3 3/16
8.10 cm
2
5.08 cm
"
"
1 3/16
3.02 cm
5
/8
1.59 cm
"
WIDTH
THICKNESS
Maximum Width: 24"
(60.96 cm)
8"
"
1 3/8
3.49 cm
20.32 cm
"
1 7/8
4.76 cm
6"
2 3/8 "
12 "
6.03 cm
"
2 7/8
7.30 cm
18 "
3 1/8 "
24 "
7.94 cm
Maximum Thickness: 3 1/2"
(8.89 cm)
15 1/16"
38.26 cm
Displacement: 2.52 ft³ (71.4 L)
"
19 1/16
48.42 cm
Introduced: July 2006
"
21 3/8
54.29 cm
Available Rockers: Refer to Rocker Catalog
"
22 7/8
58.10 cm
Shaper's Comments: This is the 6’9”A mold design again…same everything! This blank can be
ordered wider or narrower as to allow for stronger
1
/16"
0.16 cm
3
/64
0.12 cm
3
/8
0.95 cm
"
"
36 "
3 7/16
8.73 cm
"
Center
3 3/8
8.57 cm
"
36 "
23 3/4
60.33 cm
3"
24 "
21 3/4
55.25 cm
18 "
20 1/16
50.96 cm
8.89 cm
24 "
60.96 cm
7.62 cm
24 "
"
"
"
"
2
"
2 5/16
5.87 cm
12 "
18 1/8
46.04 cm
"
1 15/16"
6"
15 3/4 "
"
1 1/2
3.81 cm
1 1/16
2.70 cm
1 7/ 16
3.65cm
11/16
6.83 cm
and less waste.
60.96 cm
"
11
/16
1.75 cm
1 7/ 8
4.76cm
decks/rails near the perimeter of the board outline,
"
3 1/2
"
4.92 cm
40.01 cm
12 "
"
Designed and shaped by:
"
30.48 cm
Pat Rawson
ALSO AVAILABLE IN
23
*
Call (310) 225-6774 or visit www.usblanks.com
7'0"A
Overall Bottom Length: 6' 11 1/2" (212.09 cm)
Tip-to-tip Deck Length: 6' 10 3/4" (210.19 cm)
Maximum Width: 22 1/8"
(56.20 cm)
Maximum Thickness: 3 3/16"
ROCKER
THICKNESS
5 /2 "
1"
1
13.97 cm
WIDTH
4 5/8 "
2.54 cm
11.75 cm
3 1/8 "
1 9/16"
11 7/16"
7.94 cm
3.97 cm
6"
1 3/ 4 "
2 1/16"
4.45 cm
5.24 cm
12 "
15 5/8 "
1"
2 1/ 2 "
18 "
18 3/8 "
2 13/16"
24 "
20 1/8 "
Displacement: 2.12 ft³
(8.10 cm)
(60.0 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
29.05 cm
39.69 cm
Shaper's Comments:
This newly made 7’0”A blank is the original 6’11’A
lengthened to net a 6’11 bottom length. I re-designed
2.54 cm
6.35 cm
46.67 cm
the rail shape for less waste and stronger foam, and I
also widened the nose @ 12” by 2 1/2”, the wide point
1
/2
1.27 cm
"
7.14 cm
51.12 cm
by 1/4”, and the tail @ 12” by 1”, as to be a more useful
blank in this size range. The new natural rocker in this
mold design is the popular 7’0”A +1/2” nose, +1/2” tail.
This rocker being shaped in instead of glued up, will
1
/32"
0.08 cm
3 1/ 8 "
36 "
21 7/8 "
3 3/16 "
Center
22 1/16"
3 1/8 "
36 "
7.94 cm
8.10 cm
1
/16"
0.16 cm
7.94 cm
55.56 cm
56.04 cm
21 9/16"
54.77 cm
allow for a much more accurate finished rocker, due to
no “spring back”. The original 6’11”A natural rocker is
still available. All the “A” series blanks are designed to
take the majority of thickness off the bottom, leaving
small adjustments in the nose and tail rocker and their
thicknesses. This blank can be ordered wider or narrower
as to allow for stronger decks/rails near the perimeter
7
"
3/
4
6.99 cm
24 "
19 5/ 8 "
"
2 1/2 "
18 "
17 7/8 "
"
2 3/16
5.56 cm
"
12 "
15 3/4 "
"
1 7/8 "
6"
12 3/ 4 "
2"
1 3/8"
/16"
1.11 cm
11
/16
1.75 cm
1 1/16
2.70 cm
1 1/2
3.81 cm
5.08 cm
2
6.35 cm
4.76 cm
49.85 cm
45.40 cm
40.00 cm
32.39 cm
"
8 1/2
21.59 cm
3.49 cm
Designed and shaped by:
of the board outline, and less waste.
Pat Rawson
24
*
Call (310) 225-6774 or visit www.usblanks.com
7'1"A
Overall Bottom Length: 7' 0 7/8"
Tip-to-tip Deck Length: 6' 11"
ROCKER
THICKNESS
WIDTH
4 1/2"
5 11/16"
1 1/8 "
3 1/2 "
1 3/4 "
6"
2 1/16"
2 3/16"
12 "
1 1/4 "
2 1/2 "
/16"
2 3/4 "
14.45 cm
8.89 cm
5.24 cm
3.18 cm
11
1.75 cm
11.43 cm
2.86 cm
4.45 cm
5.56 cm
6.35 cm
6.99 cm
18 "
24 "
11 1/8 "
(215.58 cm)
(213.04 cm)
Maximum Width: 22 3/16"
(56.36 cm)
Maximum Thickness: 3 "
(7.62 cm)
Displacement: 2.05 ft³
(58.1 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
28.26 cm
15 1/ 2 "
39.37 cm
18 3/8 "
46.67 cm
20 3/16"
51.28 cm
Shaper's Comments:
This newly made 7’1”A blank is the original 7’0”A
lengthened to net a 7’0 bottom length. I re-designed
the rail shape for less waste and stronger foam, and I
also widened the nose @ 12” by 2”, the wide point by
3/4”, and the tail @ 12” by 1”, as to be a more useful
blank in this size/volume range. The new natural rocker
in this mold design is the popular 70A +1/2” nose, +1/2”
/32"
3
0.24 cm
3"
7.62 cm
3"
36 "
Center
/16"
0.16 cm
2 15/16 "
7.46 cm
56.04 cm
22 3/16"
56.36 cm
7.62 cm
1
22 1/16"
36 "
21 3/4"
55.25 cm
tail. This rocker being shaped in instead of glued up, will
allow for a much more accurate finished rocker, due to
no “spring back”. The original 7’0”A natural rocker is still
available. All the “A” series blanks are designed to take
the majority of thickness off the bottom, leaving small
adjustments in the nose and tail rocker and their thicknesses. This blank can be ordered wider or narrower
as to allow for stronger decks/rails near the perimeter
"
2 5/8 "
24 "
19 9/16"
"
2 7/16 "
18 "
17 13/16"
1"
2 1/8"
12 "
15 5/8 "
1 7/16
3.65 cm
"
1 13/16"
6"
12 3/4 "
2 1/16"
1 5/16"
3
/8
0.95 cm
11
/16
1.75 cm
2.cm
5. cm
6.67 cm
6.19 cm
5.40 cm
4.60 cm
44.69
45.24 cm
39.69 cm
32.39 cm
9"
3.33 cm
Designed and shaped by:
of the board outline, and less waste.
22.86 cm
Pat Rawson
25
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
5 3/8 "
13.65 cm
THICKNESS
7/8
"
3 1/4 "
2.22 cm
"
12 "
"
2 3/8 "
18 "
"
2
"
1 1/8
2.86 cm
9
/16
1.43 cm
3.49 cm
2
(214.63 cm)
Tip-to-tip Deck Length: 6'11 3/4"
(212.73 cm)
Maximum Width: 22 9/16"
(57.31 cm)
Maximum Thickness: 3"
(7.62 cm)
8.26 cm
6"
1 15/16
4.92 cm
Overall Bottom Length: 7' 0 1/2"
WIDTH
1 1/2"
"
3 5/16
8.41 cm
7'1"EA
11 1/8 "
28.26 cm
5.08 cm
Displacement: 1.93 ft³
15 3/ 4"
(54.6 L)
40.01 cm
6.03 cm
Introduced: July 2006
18 5/ 8 "
47.31 cm
"
11/16
6.83 cm
24 "
20 7/16"
Available Rockers: Refer to Rocker Catalog
51.91 cm
Shaper's Comments: This is the shorter version
of the 7’6” EA.
"
1
/32
0.08 cm
2 15/16"
7.46 cm
3"
36 "
22 5/16
56.67 cm
Center
22 9/16
57.31 cm
7.62 cm
"
"
"
2 15/16"
36 "
22 5/16
56.67 cm
"
2 11/16 "
24 "
20 1/ 2
52.07 cm
"
2 7/16"
18 "
18 11/16 "
1"
2 1/8 "
12 "
16 1/ 4
41.28 cm
"
"
1 5/8 "
6"
12 7/16
31.59 cm
"
1
/16
0.16 cm
5
/16
0.79 cm
5
/8
1.59 cm
2.54 cm
1 1/ 2
3.81 cm
"
2 1/4
5.72 cm
7.46 cm
6.83 cm
6.19 cm
5.40 cm
4.13 cm
1"
2.54 cm
Designed and shaped by:
"
"
47.47 cm
6"
15.24 cm
Eric Arakawa
ALSO AVAILABLE IN
26
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
THICKNESS
3 1/2 "
"
"
15/
16
2.38 cm
3 7/8
9.84 cm
"
1 5/16
3.33 cm
6"
9 1/4
23.50 cm
2 5/16
5.87 cm
"
1 13/16"
12 "
13 1/4"
"
2 1/ 4
5.72 cm
"
18 "
16 1/4 "
"
2 9/16
6.51 cm
"
24 "
18 9/16"
1 1/4
3.18 cm
5
/8
1.59 cm
4.60 cm
Overall Bottom Length: 7' 2 1/2"
(219.71 cm)
Tip-to-tip Deck Length: 7' 1 7/8"
(218.12 cm)
WIDTH
6 1/16
15.40 cm
"
7'2"EA
Maximum Width: 21 5/8"
8.89 cm
"
(54.93 cm)
Maximum Thickness: 2 15/16"
Displacement: 1.89 ft³
33.66 cm
(7.46 cm)
(53.4 L)
Introduced: April 2007
41.28 cm
Available Rockers: Refer to Rocker Catalog
47.15 cm
Shaper's Comments: This blank is a versatile
high performance semi-gun which was designed in
1
"
/16
0.16 cm
"
7
2 /8
7.30 cm
36 "
21 /16"
3
53.82 cm
series with the 7’8 EA. The rocker and foil will accommodate a wide variety of bottom contours.
2 15/16"
Center
"
21 5/8 "
54.93 cm
7.46 cm
"
2 7/8
7.30 cm
36 "
21 7/16"
"
2 5/ 8
6.67 cm
"
24 "
19 3/ 8"
"
2 3/ 8
6.03 cm
"
18 "
17
1 5/16
3.33 cm
"
2 1/16
5.24 cm
"
12 "
15 1/ 4 "
1 15/16"
1 11/16
4.29 cm
"
6"
11 15/ 16"
2 9/16"
1 3/8
3.49 cm
1
/16
0.16 cm
1
/2
1.27 cm
13
/16
2.06 cm
4.92 cm
6.51 cm
"
Designed and shaped by:
54.45 cm
49.21 cm
"
9/16
44.61 cm
38.74 cm
30.32 cm
"
6 1/ 4
15.88 cm
Eric Arakawa
27
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
THICKNESS
Overall Bottom Length: 7' 2 7/8" (220.66 cm)
WIDTH
"
1 3/8
3.49 cm
"
"
1 7/8
4.76 cm
"
6"
14 1/2
36.83 cm
"
2 7/16
6.19 cm
"
12 "
18 1/2
46.99 cm
1 3/8
3.49 cm
"
2 7/8
7.30 cm
"
18 "
"
3 3/16
8.10 cm
"
24 "
5 5/16
13.49 cm
3 1/2
8.89 cm
2 1/4
5.72 cm
3
/4
1.91 cm
7'3"A
"
7 3/8
18.73 cm
"
"
21"
Tip-to-tip Deck Length: 7' 2 3/8"
Maximum Width: 24"
(60.96 cm)
Maximum Thickness: 3 5/8"
Displacement: 2.74 ft³
(219.39 cm)
(9.21 cm)
(77.7 L)
Introduced: July 2006
53.34 cm
"
22 1/2
57.15 cm
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: This is my enlarged ver1
/8
"
0.32 cm
3 9/16"
9.05 cm
36 "
sion of the 6’9”A fish blank. I designed this one
24 "
as to be able to easily net a 7’3” by the bottom
60.96 cm
measurement. Bottom rocker is a longer version
"
3 9/16
9.05 cm
Center
24"
of the natural rocker of the 6’9”A I made in 2002. I
60.96 cm
basically “blew up” the 6’9”A concept for this mold
/32"
3
0.24 cm
"
3 7/16
8.73 cm
36 "
23 1/2 "
59.69 cm
design. This blank can be ordered wider or narrower as to allow for stronger decks/rails near the
perimeter of the board outline, and less waste.
"
1
/2
1.27 cm
3"
24 "
21 3/8
54.29 cm
7.62 cm
"
"
2 11/16
6.83 cm
"
18 "
19 13/16
50.32 cm
1 3/16
3.02 cm
"
2 5/16
5.87 cm
"
12 "
17 3/4
45.09 cm
1 5/8
4.13 cm
"
1 15/16
4.92 cm
"
6"
15 1/16
38.52 cm
"
1 1/2
3.81 cm
13
/16
2.06 cm
2 1/16
5.24 cm
"
Designed and shaped by:
"
"
"
11 "
27.94 cm
Pat Rawson
28
*
Call (310) 225-6774 or visit www.usblanks.com
7'5"A
Overall Bottom Length: 7' 4 1/2" (224.79 cm)
Tip-to-tip Deck Length: 7' 3 7/16" (222.09 cm)
ROCKER
6"
15.24 cm
"
3 9/16
9.05 cm
"
2 1/16
5.24 cm
"
1 3/16
3.02 cm
11
/16
1.75 cm
"
THICKNESS
WIDTH
"
4 3/4
12.07 cm
1"
2.54 cm
"
1 1/2
3.81 cm
6"
2"
12 "
5.08 cm
2 3/8 "
6.03 cm
"
2 5/8
6.67 cm
18 "
24 "
Maximum Width: 21 7/8"
(55.56 cm)
Maximum Thickness: 3"
(7.62 cm)
Displacement: 2.13 ft³
(60.2 L)
Introduced: July 2006
11 "
27.94 cm
Available Rockers: Refer to Rocker Catalog
"
15 3/16
38.58 cm
Shaper's Comments:
18 "
This newly made 7’5A” blank is the original 7’3”A length-
45.72 cm
ened to easily net a 7’4” bottom length. I re-designed
"
19 11/16
50.01 cm
the rail shape for less waste and stronger foam, and I
also widened the nose @ 12” by 2”, the wide point by
3/8”, and the tail @ 12” by 1”, as to be a more useful
blank in this size/volume range. The new natural rocker
"
1
/8
0.32 cm
"
2 15/16
7.46 cm
36 "
"
21 5/8
54.93 cm
in this mold design is the 7’3”A +1/2” nose, +3/8” tail.
This rocker being shaped in instead of glued up, will
allow for a much more accurate finished rocker, due to
3"
Center
7.62 cm
21
7/8
"
55.56 cm
no “spring back”. We have the old 7’3”A natural rocker
if anyone still wants it. All the “A” series blanks are de-
3
/32"
0.24 cm
"
2 7/8
7.30 cm
36 "
"
21 1/4
53.96 cm
signed to take the majority of thickness off the bottom,
leaving small adjustments in the nose and tail rocker
and their thicknesses. This blank can be ordered wider
or narrower as to allow for stronger decks/rails near the
"
2 9/16
6.51 cm
"
24 "
19 3/16
48.74 cm
"
2 3/8
6.03 cm
"
18 "
17 1/ 2
44.45 cm
1 3/16
3.02 cm
"
2 1/16
5.24 cm
"
12 "
15 3/8
39.05 cm
1 5/8
4.13 cm
"
1 3/4
4.45 cm
"
6"
12 11/16
32.23 cm
2 1/8
"
1
/2
1.27 cm
13
/16
2.06 cm
5.40 cm
"
perimeter of the board outline, and less waste.
"
"
"
"
1 3/8
3.49 cm
Designed and shaped by:
"
8 1/2
21.59 cm
Pat Rawson
29
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
THICKNESS
5 3/ 8 "
— 1 1/ 16"
3 7/16"
—1
1/ 2
2 1/16 "
—2
1/ 16
"
—2
1/
/16"
—2
3/ 4
13.65 cm
8.73 cm
5.24 cm
1 1/4
3.18 cm
11
1.75 cm
3.81 cm
5.24 cm
2
6.35cm
6.99 cm
Overall Bottom Length: 7' 6"
WIDTH
2 7/ 8"
2.70 cm
7'6"EA
(228.60 cm)
Tip-to-tip Deck Length: 7' 5 3/8" (227.01 cm)
7.30 cm
"
6"
"
12 "
"
18 "
"
24 "
10 15/16"
Maximum Width: 23"
(58.42 cm)
27.78 cm
15 5/8 "
Maximum Thickness: 3 3/16"
(8.10 cm)
39.69 cm
18 11/16"
Displacement: 2.28 ft³
(64.6 L)
47.47 cm
20 5/8 "
Introduced: July 2006
52.39 cm
Available Rockers: Refer to Rocker Catalog
1
/8
"
.32 cm
—3
"
1/
8
7.94 cm
36 "
22 5/ 8"
57.47 cm
Shaper's Comments: This is primarily designed
for making fun boards. It comes with a moderate
but continuous even rocker and foil to make “posi-
—3
3/16
8.10 cm
"
Center
22 15/16"
58.26 cm
“
—3
"
36 "
22 7/16
56.99 cm
"
— 2 11/16"
24 "
20 3/8
51.75 cm
7
/8
2.22 cm
"
—2
"
18 "
18 1/2
46.99 cm
"
"
—2
"
12 "
16 1/8
40.96 cm
"
3
/4
4.45 cm
"
—1
"
6"
12 5/8
32.07 cm
2 5/16"
—1
"
1
/8
.32 cm
1
/2
1.27 cm
1 1/4
3.18 cm
1
5.87 cm
1/
16
7.78 cm
6.83 cm
7/ 16
6.19 cm
1/
8
5.40 cm
3/ 4
4.45 cm
3/
8
3.49 cm
Designed and shaped by:
tioning” the blank for the shape process easy.
"
"
"
"
6 5/ 8
16.83 cm
Eric Arakawa
ALSO AVAILABLE IN
30
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
6"
15.24 cm
4"
10.16 cm
2 9/16 "
6.51 cm
"
1 5/8
4.13 cm
"
15
/16
2.38 cm
THICKNESS
1 3/8
3.50 cm
1 5/8
4.13cm
"
2 5/16
5.87 cm
"
2 3/ 4
6.99 cm
"
3 1/16
7.78 cm
"
Overall Bottom Length: 7' 6 5/8"
WIDTH
"
4 3/4
12 "
18 "
24 "
Tip-to-tip Deck Length: 7' 6"
Maximum Width: 22 7/8"
"
12.07 cm
6"
7'7"A
"
Displacement: 2.63 ft³
(228.60 cm)
(58.10 cm)
Maximum Thickness: 3 7/16"
1113/16
30.00 cm
(230.19 cm)
(8.73 cm)
(74.6 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
"
16 1/4
41.28 cm
Shaper's Comments:
This newly made 7’7”A blank is the original 7’5”A
19 "
48.26 cm
20 3/4
52.71 cm
lengthened to easily net a 7’6” bottom length. I re-
"
designed the rail shape for less waste and stronger
foam and also widened the nose @ 12” by 2”, the
wide point by 1”, and the tail @ 12” by 1”, as to be a
more useful blank in this size/volume range. The new
"
3
/16
.48 cm
3 7/16
8.73 cm
"
36 "
"
22 11/16
57.63 cm
natural rocker in this mold design is the 7’5”A +1/2”
nose, +3/8” tail. This rocker being shaped in instead of
glued up, will allow for a much more accurate finished
3 7/16"
Center
8.73 cm
22 7/8 "
58.10 cm
rocker, due to no “spring back”. We have the old 7’5”A
natural rocker if anyone still wants it. All the “A” series
blanks are designed to take the majority of thickness
1
/8
"
.32 cm
3 5/16"
8.41 cm
36 "
22 1/8 "
56.20 cm
off the bottom, leaving small adjustments in the nose
and tail rocker and their thicknesses. This blank can
be ordered wider or narrower as to allow for stronger
decks/rails near the perimeter of the board outline,
2 7/8
1.43 cm
7.30 cm
"
24 "
"
2 5/8
6.67 cm
"
18 "
18 1/8
46.04 cm
"
2 5/16
5.87 cm
"
12 "
16 1/8
40.96 cm
"
1 15/16
4.92 cm
"
6"
13 1/2
34.29 cm
2 3/16"
1 1/ 2
3.81 cm
"
/16 "
9
13
/16
2.06 cm
1 1/4
3.18 cm
1
11
/16
4.29 cm
5.56 cm
Designed and shaped by:
19 15/16"
and less waste.
50.64 cm
"
"
"
"
9 3/4
24.77 cm
Pat Rawson
31
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
6 3/16"
"
1
2.54 cm
"
1 3/8
3.49 cm
"
1 13/16
4.60 cm
4
10.16 cm
2 1/2
6.35 cm
"
1 1/2
3.81 cm
"
13
/16
2.06 cm
Overall Bottom Length: 7' 9"
"
3 3/16
8.01 cm
"
6"
8 7/8
22.54 cm
"
12 "
12 3/ 4 "
"
18 "
16 "
"
24 "
18 3/16"
2 1/4
5.72 cm
2 9/16
6.51 cm
(236.22 cm)
WIDTH
THICKNESS
15.72 cm
7'8"EA
"
32.39 cm
40.64 cm
46.20 cm
Tip-to-tip Deck Length: 7' 8 3/16" (234.16 cm)
Maximum Width: 21 7/8"
(55.56 cm)
Maximum Thickness: 3"
(7.62 cm)
Displacement: 2.03 ft³
(57.5 L)
Introduced: June 2007
Available Rockers: Refer to Rocker Catalog
"
1
/8
0.32 cm
"
3
7.62 cm
36 "
21 "
Shaper's Comments: Designed in series with the
53.34 cm
7’2 EA to yield guns in the 7’0 to 7’7 range.
3"
21 7/8
55.56 cm
"
36 "
21 1/8
53.66 cm
"
2 7/ 8
7.30 cm
"
2 9/16
6.51 cm
"
24 "
18 13/16
47.78 cm
"
2 5/16
5.87 cm
"
18 "
16 7/ 8
42.86 cm
2"
12 "
14 1/2
36.83 cm
6"
11 3/8
28.89 cm
1
/8
0.32 cm
5
/8
1.59 cm
1
"
Center
7.62 cm
2.54 cm
1 3/ 8 "
3.49 cm
5.08 cm
"
15
/16
4.92 cm
"
1 5/ 8
4.13 cm
"
1 3/8
3.49 cm
1
2 5/8
6.67 cm
"
Designed and shaped by:
"
"
"
"
"
"
6 9/16
16.67 cm
Eric Arakawa
32
79H’X’ also available
+ 3/8” thicker
3 1/2
"
8.89 cm
THICKNESS
1 1/8
2.86 cm
"
"
12 "
19 3/ 4
50.17 cm
2 5/16"
18 "
21 1/2"
2 1/16
5.24 cm
1 5/16 "
3.33 cm
7
/8
"
2.22 cm
Tip-to-tip Deck Length: 7' 8 3/8"
16 1/4
41.28 cm
"
4.76 cm
WIDTH
6"
1 11/16
4.29 cm
1 7/8
Overall Bottom Length: 7' 8 5/8" (235.27 cm)
"
2 9/16 "
6.51 cm
*
5.87 cm
2 5/8
6.67 cm
"
7'9"H
24 "
"
Maximum Width: 23 9/16"
"
(234.63 cm)
(59.85 cm)
Maximum Thickness: 3 3/16"
(8.10 cm)
“X” VERSION ALSO AVAILABLE
+3/8” THICKER
54.61 cm
Displacement: 2.51 ft³
22 5/8"
(71.2 L)
57.47 cm
Introduced: July 2006
/16 "
3
.48 cm
3"
36 "
7.62 cm
Available Rockers: Refer to Rocker Catalog
23 1/2 "
59.69 cm
Shaper's Comments: Designed for retro funshapes. Based on feedback from 7’11”H and
3 3/16
8.10 cm
"
Center
"
23 9 /16
59.85 cm
8’4”H, improvements were made in the thickness
and foil. Should accomodate many rockers and be
an easy hand or machine shape blank.
"
"
3 1/16
7.78 cm
"
36 "
22 3/ 4
57.79 cm
13
/16
2.06 cm
"
2 5/8
6.67 cm
"
24 "
20 7/8
53.02 cm
1 3/16"
2 3/8
6.03 cm
"
18 "
19 1 /4
48.90 cm
3
/16
.48 cm
3.02 cm
"
"
"
1
"
2 1/16
5.24 cm
"
12 "
17 1/16
43.34 cm
2 1/4
"
1 5/8
4.13 cm
"
6"
13 11/16
34.77 cm
2 15/16"
1 3/16
3.02 cm
"
11
/16
4.29 cm
5.40 cm
7.46 cm
Designed and shaped by:
"
"
8 1/2
21.59 cm
Roger Hinds
33
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
7
"
6 /16
16.38 cm
THICKNESS
1
1/8
WIDTH
"
"
3 1/2
8.89 cm
2.86 cm
7'11"A
Overall Bottom Length: 7' 11 1/2" (242.57 cm)
Tip-to-tip Deck Length: 7' 10 11/16" (240.51cm)
Maximum Width: 21 7/8"
4 /16"
13
"
"
1 11/16
4.24 cm
6"
9 1/8
23.18 cm
6.83 cm
2 1/ 8 "
5.40 cm
12 "
13 1/4 "
1 11/16"
4.29 cm
2 7/16"
6.19 cm
18 "
1 1/16 "
2 11/16"
24 "
10.64 cm
Maximum Thickness: 3 1/8"
Displacement: 2.32 ft³
2
/16"
11
33.66 cm
(55.56 cm)
(7.94 cm)
(65.7 L)
Introduced: September 2006
Available Rockers: Refer to Rocker Catalog
16 3/8 "
41.59 cm
Shaper's Comments:
This newly made 7’11”A blank was lengthened to
2.70 cm
6.83 cm
18 5/8 "
47.31 cm
easily net a 7’10” bottom length. I redesigned the
rail shape for less waste and stronger foam. I also
widened the nose @12” by ½”, the wide point by
3/8”, and the tail @12” by ½”, as to be a more useful
/4 "
1
0.64 cm
3 1/16"
7.78 cm
36 "
21 5/16"
54.13 cm
blank in this size/volume range. The new natural
rocker in this mold design is the 7’11”A +½” nose,
+3/8” tail. This rocker being shaped in instead of
3 1/8 "
Center
7.94 cm
21 7/ 8 "
55.56 cm
glued up, will allow for a much more accurate finished rocker, due to no “spring back.” I have the old
7’11”A natural rocker if anyone still wants it. All the
“A” series blanks are designed to take the majority of
1
/8
"
0.32 cm
3"
7.62 cm
36 "
20 5/8 "
52.39 cm
thickness of the bottom, leaving small adjustments
in the nose and tail rocker and their thicknesses.
This blank can be ordered wider or narrower as to
allow for stronger decks/rails near the perimeter of
5
/8
"
2 5/8 "
24 "
"
18 "
16 3/8
41.59 cm
"
12 "
14 1/8
35.88 cm
"
6"
11 1/4
28.58 cm
1.59 cm
6.99 cm
15
/16
2.38 cm
"
2 3/8
6.03 cm
1 3/ 8
3.49 cm
"
2 1/8
5.40 cm
1 7/ 8 "
1 3/4
4.45 cm
2 1/ 2 "
1 7/16
3.65 cm
4.76 cm
6.35cm
"
Designed and shaped by:
18 1/8 "
the board outline, and less waste.
46.04 cm
"
"
"
"
7 1/8
18.10 cm
Pat Rawson
34
*
Call (310) 225-6774 or visit www.usblanks.com
8'0"H
Overall Bottom Length: 8' 0 1/8" (244.16 cm)
Tip-to-tip Deck Length: 7' 11 5/8" (242.89 cm)
Maximum Width: 23 5/8"
(60.01 cm)
Maximum Thickness: 3 5/16"
THICKNESS
3 9/16"
15/16
"
WIDTH
Displacement: 2.77 ft³
"
Introduced: July 2006
9.05 cm
2.38 cm
2 5/8 "
1 3/4
4.45 cm
"
6"
15 3/8
39.05 cm
1 7/8 "
2 1/8
5.40 cm
"
12 "
4.76 cm
19 1/16
48.42 cm
1 /4 "
1/2
"
18 "
21 1/16
53.50 cm
2 13/16"
24 "
6.67 cm
1
3.18 cm
3
/4 "
1.91 cm
2
6.35 cm
7.14 cm
(8.41 cm)
(78.4 L)
"
Available Rockers: Refer to Rocker Catalog
"
22 3/16"
56.36 cm
Shaper's Comments: Designed for retro funshapes. Based on feedback from 7’11”H and
8’4”H, improvements were made in the thickness
/16"
3
.48 cm
3 3/16"
8.10 cm
36 "
59.53 cm
"
Center
23 5/8
60.01 cm
"
36 "
22 5/8
57.47 cm
"
24 "
20 1/2
52.07 cm
"
3 3/16
8.10 cm
13
/16
2.06 cm
"
2 3/4
6.99 cm
1 1/4 "
2 7/16
6.19 cm
"
18 "
18 13/16
47.78 cm
1 3/ 4 "
2 1/8
5.40 cm
"
12 "
16 7/16
41.75 cm
2 7/ 8 "
1 3/4
4.45 cm
“
6"
.64 cm
3.18 cm
4.45 cm
7.30 cm
3 1/8 "
7.94 cm
"
"
"
13 "
33.02 cm
"
"
6 3/4
17.15 cm
1 5/16
3.33cm
Designed and shaped by:
an easy hand or machine shape blank.
"
3 5/16
8.41 cm
/4 "
1
and foil. Should accomodate many rockers and be
23 7/16"
Roger Hinds
35
*
Call (310) 225-6774 or visit www.usblanks.com
8'1"EA
Overall Bottom Length: 8' 0 5/8" (245.43 cm)
Tip-to-tip Deck Length: 7' 11 3/4" (243.21 cm)
Maximum Width: 24 1/16"
(61.19 cm)
Maximum Thickness: 3 3/8"
6 7/16"
16.35 cm
THICKNESS
WIDTH
Displacement: 2.66 ft³
— 3 3/8 "
— 1"
6"
— 12 1/8 "
— 1 15/16"
12 "
— 17 1/16"
1 /16"
—2
18 "
—
4.60 cm
6.19 cm
"
1 1/16"
— 2 13/16"
24 "
— 21 9/16"
—1
2 7/8 "
11.11 cm
7.30 cm
13
2.70 cm
(75.3 L)
8.57 cm
2.54 cm
4 3/8 "
(8.57 cm)
7/16
3.65 cm
"
4.92 cm
7/16
7.14 cm
30.80 cm
43.34 cm
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
"
19 13/16
50.32 cm
54.77 cm
Shaper's Comments: This is the bigger version
of the 7’6” EA. I added width forward to accommodate wider noses.
—3
"
—3
"
3
/16
.48 cm
"
—3
"
5
/8
1.59 cm
"
—2
"
"
—2
7/16
"
1
/4
.64 cm
5/16
8.41 cm
3/8
8.57 cm
15
/16
2.38 cm
3/16
8.10 cm
3/4
6.99 cm
"
6.19 cm
36 "
— 23 7/16"
59.53 cm
Center
— 24 1/16"
36 "
— 23 7/16"
24 "
— 21 1/8 "
18 "
— 19 1/4 "
61.12 cm
59.53 cm
53.66 cm
48.90 cm
1 3/8 "
— 2 1/8 "
12 "
— 16 3/4"
6"
— 13 3/8"
3.49 cm
5.40 cm
2"
— 1 11/16"
5.08 cm
4.29 cm
2 11/16"
— 1 5/16"
6.83 cm
3.33 cm
Designed and shaped by:
42.55 cm
33.97 cm
— 7 3/4 "
19.69 cm
Eric Arakawa
36
*
Call (310) 225-6774 or visit www.usblanks.com
8'2"A
Overall Bottom Length: 8' 2 1/2" (250.19 cm)
82A’X’ also available
+ 3/8” thicker
Tip-to-tip Deck Length: 8' 1 1/2" (247.65 cm)
Maximum Width: 25"
(63.50 cm)
Maximum Thickness: 4 1/16"
ROCKER
—
4"
6"
— 12
1/ 2
"
12 "
— 17
"
3"
18 "
— 20
24 "
— 22
—1
"
— 1 13/16"
"
—2
"
—
4 3/8
11.11 cm
11
/16
6.83 cm
1 11/16
4.29 cm
1"
2.54 cm
WIDTH
"
"
6 5/8
16.83 cm
2
THICKNESS
5/
16
3.33 cm
4.60 cm
7/
16
6.19 cm
—
7.62 cm
"
3 3/8
8.57 cm
10.16 cm
31.75 cm
"
3/8
44.13 cm
1/4
"
(10.32 cm)
“X” VERSION ALSO AVAILABLE
+3/8” THICKER
Displacement: 3.59 ft³ (101.7 L)
Introduced: July 2008
Available Rockers: Refer to Rocker Catalog
52.07 cm
"
7/16
56.99 cm
Shaper's Comments: I designed the 8’2A to be a
serious “big guy” blank for either high performance,
retro’s, or fun gun styles. I desinged this blank
1
"
/4
0.64 cm
—3
"
15/16
10.00 cm
36 "
— 24
"
7/16
62.07 cm
with a performance bottom curve and enough
volume for 300 lb. surfers. It should be able to
yield 8’0 x 24 x 3 3/4 with ability to position the
— 4 1/16"
10.32 cm
Center
— 63.5025cm"
overall rocker and nose widths as needed. Cutting
2” length off the nose will enable a 18 1/2” nose
width at 12” back, and facilitate well for big guy fish
3
/16"
0.48 cm
—3
/8 "
7
36 "
— 24
"
1/16
61.12 cm
9.84 cm
designs. MY SPECIAL THANKS TO BEN AIPA
who provided inspiration on the overall design of
this blank and the new 9’3A.
"
—3
"
—
"
—2
2"
—2
11
/16
1.75 cm
1 1/16
2.70 cm
1 1/2
3.81 cm
5.08 cm
"
2 9/16
6.51 cm
"
24 "
— 21 7/8 "
3"
18 "
— 20
"
12 "
— 17 11/16"
"
6"
3/8
8.57 cm
7.62 cm
5
/8
6.68 cm
1/
8
5.40 cm
— 1 3/4 "
4.45 cm
Designed and shaped by:
55.56 cm
"
1/8
51.12 cm
44.93 cm
— 14
"
—
"
5/16
36.35 cm
Pat Rawson
9 1/2
24.13 cm
37
*
Call (310) 225-6774 or visit www.usblanks.com
8'3"H
Overall Bottom Length: 8' 3 1/8"
(251.78 cm)
Tip-to-tip Deck Length: 8' 2 5/8"
(250.51 cm)
Maximum Width: 23 5/8"
ROCKER
THICKNESS
10.48 cm
"
1 1/4
3.18 cm
3"
5/8
4 1/8
7.62 cm
2 1/8 "
5.40 cm
"
1
"
12 "
"
18 "
5.24 cm
"
2 3/4
6.99 cm
15
/16
2.38 cm
6"
2 1/16"
2 7/16
6.19 cm
Maximum Thickness: 3 3/8"
Displacement: 2.74 ft³
4.13 cm
1 7/16"
3.65 cm
WIDTH
"
24 "
(60.01 cm)
(8.57 cm)
(77.6 L)
"
15 1/8
38.42 cm
18 3/4 "
Introduced: July 2006
47.63 cm
"
20 3/4
52.71 cm
22 "
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: Designed for retro fun-
55.88 cm
shapes. Based on feedback from 7’11”H and
/4 "
1
.64 cm
3 3/16 "
8.10 cm
36 "
23 5/16"
59.21 cm
8’4”H, improvements were made in the thickness
and foil. Should accomodate many rockers and be
an easy hand or machine shape blank.
"
Center
23 5/8
60.01 cm
"
36 "
22 5 /8
57.47 cm
"
"
3 3/8
8.57 cm
"
"
3 3/16
8.10 cm
13
/16
2.06 cm
"
2 13/16
7.14 cm
"
24 "
20 1/ 2
52.07 cm
1 1/ 4 "
2 7/16
6.19 cm
"
18 "
18 3/4
47.63 cm
1 7/8 "
2 1/16
5.24 cm
"
12 "
16 5/16
41.43 cm
2 1/ 2 "
1 11/16
4.29 cm
6"
12 7/8
32.70 cm
7
/32
.56 cm
3.18 cm
4.76 cm
6.35 cm
3 3/16"
8.10 cm
"
"
"
"
"
1 1/8
2.86 cm
Designed and shaped by:
"
7 5/8
19.37 cm
Roger Hinds
38
*
Call (310) 225-6774 or visit www.usblanks.com
8'4"SP
Overall Bottom Length: 8' 4 7/16" (255.11 cm)
84SP’X’ also available
+ 3/8” thicker
Tip-to-tip Deck Length: 8' 3 13/16" (253.52 cm)
Maximum Width: 24 3/16"
ROCKER
4 3/4 "
12.07 cm
3
1/4
"
THICKNESS
2 5/32"
5.48 cm
2 1/4
5.72 cm
"
9/16
/16"
13
2.06 cm
"
1 /
4.60 cm
3.49 cm
WIDTH
"
+3/8” THICKER
6"
15
13/16
40.16 cm
19 1/4
48.90 cm
"
18 "
21 3/16
53.82 cm
2 13/16"
24 "
22 1/2"
2
7.14 cm
"
Displacement: 2.97 ft³
(84.0 L)
"
12 "
6.51 cm
(8.57 cm)
“X” VERSION ALSO AVAILABLE
3.33 cm
8.26 cm
1 3/8
Maximum Thickness: 3 3/8"
1 5/16"
13 16
(61.44 cm)
Introduced: May 2009
"
Available Rockers: Refer to Rocker Catalog
57.15 cm
Shaper's Comments: This collaboration is the
/16"
3
.48 cm
3 3/16"
8.10 cm
36 "
23 7/8 "
60.64 cm
lastest product of three decades of working together in one form or another. The 8’4SP was
modeled after the Clark 8’3E with slightly more
width in the nose for noserider style templates.
3
"
3/8
8.57 cm
Center
24
"
1/16
61.12 cm
Neutral tail rocker and improved curve in the bottom rocker from center to nose provide versatility
for boards in the 8’0” to 8’4” size range.
36 "
22 7/8
58.10 cm
"
24 "
20 5/8
52.39 cm
"
18 "
18 13/16
47.78 cm
12 "
16 1/2
41.91 cm
"
3 1/4
8.26 cm
3
/4
1.91 cm
"
2 7/8
7.30 cm
"
2 5/8
6.67 cm
1 9/16"
2 1/4
5.72 cm
"
1 7/8
4.76 cm
1 1/8
2.86 cm
3.97 cm
2 1/8
5.40 cm
2 13/16"
7.14cm
"
"
1
/4
.66 cm
"
"
"
1 3/8
3.49 cm
Designed and shaped by:
6"
"
"
"
13 "
33.02 cm
"
5 1/4
13.34 cm
Charlie Smith & Tom Parrish
39
*
Call (310) 225-6774 or visit www.usblanks.com
8'5"A
Overall Bottom Length: 8' 6 3/8"
(260.03 cm)
Tip-to-tip Deck Length: 8' 5 1/2" (257.81 cm)
Maximum Width: 22"
(55.88 cm)
Maximum Thickness: 3 3/8"
Displacement: 2.70 ft³
(8.57 cm)
(76.5 L)
Introduced: September 2006
ROCKER
"
3
6 /4
17.15 cm
4 9/16"
11.59 cm
"
THICKNESS
1
12 "
12 15/16
32.86 cm
"
18 "
16 "
"
24 "
2
"
11/16
6.83 cm
3
This newly made 8’5’’A blank was lengthened to
/8 "
"
4.45 cm
1 11/16"
1
Shaper's Comments:
6"
2 3/16
5.56 cm
2.54 cm
"
"
1 3/4
7.62 cm
Available Rockers: Refer to Rocker Catalog
3 1/2
8.89 cm
3.18 cm
2 7/8
7.30 cm
4.29 cm
WIDTH
"
1/4
8
7
22.54 cm
easily net an 8’6’’ bottom length. I redesigned the
"
widened the nose @12 by ½”, and pumped up the
40.64 cm
18
rail shape for less waste and stronger foam. I also
3/ 8
max thickness to 3 3/8”, to make it a more useful
"
46.67 cm
blank in this size/volume range. The new natural
rocker in this mold design is the 8’5’’A +½” nose,
+3/8” tail. This rocker being shaped in instead of
"
9
/32
0.71 cm
"
3 5/16
8.41 cm
36 "
"
21 1/16
53.50 cm
glued up, will allow for a much more accurate finished
rocker, due to no “spring back.” I have the old 8’5’’A
natural rocker if anyone still wants it. All the “A”
3 3/8
"
Center
8.57 cm
21 15/16"
55.72 cm
series of blanks are designed to take the majority of
thickness of the bottom, leaving small adjustments
in the nose and tail rocker and their thicknesses.
This blank can be ordered wider or narrower as to
/32"
7
3 3/16"
0.56 cm
8.10 cm
"
2 3/4
6.99 cm
1"
2 1/2
6.35 cm
"
2 3/16
5.56 cm
"
1 13/16
4.60 cm
"
1 7/16
3.65 cm
5
/8
1.59 cm
2.54 cm
1 3/8
3.49 cm
7
/8
4.76 cm
1
2 7/16
6.19 cm
36 "
allow for stronger decks/rails near the perimeter of
20 1/2"
52.07 cm
the board outline, and less waste.
"
24 "
17 15/16
45.56 cm
"
18 "
16 1/8
40.96 cm
"
12 "
13 11/16
34.77 cm
"
6"
10 9/16
26.83 cm
"
Designed and shaped by:
"
"
"
"
"
6 1/2
16.51 cm
Pat Rawson
40
*
Call (310) 225-6774 or visit www.usblanks.com
8'6"EA
Overall Bottom Length: 8' 6"
(259.08 cm)
Tip-to-tip Deck Length: 8' 5 1/8"
Maximum Width: 24 1/16"
THICKNESS
"
6 9/16
16.67 cm
4 7/16 "
11.27 cm
"
1 9/16"
3.97 cm
2 1/2
6.35 cm
"
18 "
19 1/2
49.53 cm
"
24 "
21 3/8
54.29 cm
"
2 7/ 8
7.30 cm
1 5/32
2.94 cm
(77.0 L)
29.25 cm
16 1/2
41.91 cm
"
7
/8
4.76 cm
Displacement: 2.72 ft³
11 1/2 "
12 "
2 1/16
5.24 cm
1
6"
(8.57 cm)
"
"
"
2 7/ 8
7.30 cm
2 1/2
6.35 cm
1 1/16
2.70 cm
(61.12cm)
Maximum Thickness: 3 3/8"
WIDTH
(257.81 cm)
Introduced: September 2006
"
"
Available Rockers: Refer to Rocker Catalog
"
Shaper's Comments: This blank is designed to
yield big fun boards and big guy guns.
"
5
/16
0.79 cm
"
36 "
23 5/16
59.21 cm
"
Center
24 1/16
61.12 cm
"
36 "
3 5/16
8.41 cm
3 3/8
8.57 cm
"
"
23 "
7
/32
0.56 cm
"
3 1/8
7.94 cm
"
2 3/4
6.99 cm
"
24 "
20 1/2
52.07 cm
1"
2 1/2
6.35 cm
"
18 "
18 5/8
47.31 cm
1 7/16
3.65 cm
"
2 3/16
5.56 cm
"
12 "
16 3/16
41.12 cm
1 31/32"
1 3/4
4.45 cm
"
6"
12 11/16
32.23 cm
"
1 1/4
3.18 cm
11
/16
1.75 cm
2.54 cm
5.00 cm
2 5/8
6.67 cm
"
Designed and shaped by:
58.42 cm
"
"
"
"
"
7 1/8
18.10 cm
Eric Arakawa
41
*
Call (310) 225-6774 or visit www.usblanks.com
8'9"Y
Overall Bottom Length: 8' 9"
89Y’X’ also available
+ 3/8” thicker
Tip-to-tip Deck Length: 8' 8 1/2"
Maximum Width: 24 13/16"
ROCKER
"
4 1/8
10.48 cm
"
3
THICKNESS
3.33 cm
"
6"
"
12 "
20 1/2
52.07 cm
"
18 "
22 1/8
56.20 cm
24 "
23 3/16
58.90 cm
1 7/8
9.05 cm
4.76 cm
2 1/8 "
2 5/16
5.87 cm
"
2 5/8
6.67 cm
"
2 13/16
7.14 cm
5.40 cm
7
/16
3.65 cm
1
15
/16
2.38 cm
"
9
/32
0.71 cm
WIDTH
1 5/16"
"
"
36 "
3 1/8
7.94 cm
(266.70 cm)
(265.43 cm)
(63.02cm)
Maximum Thickness: 3 3/8"
(8.57 cm)
“X” VERSION ALSO AVAILABLE
17 3/8 "
+3/8” THICKER
44.13 cm
Displacement: 3.25 ft³
"
"
(92.1 L)
Introduced: April 2007
"
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: Not much different than the
"
24 1/2
62.23 cm
9’3Y, just less volume, 6” shorter, 1/4” narrower,
1/8” thinner and a little wider in the tail area. Good
"
48 "
24 13/16
63.02 cm
"
Center
24 11/16
62.71 cm
"
48 "
24 1/2
62.23 cm
"
36 "
23 7/16
59.53 cm
"
24 "
21 9/16
54.77 cm
"
18 "
20 1/8
51.12 cm
"
12 "
3 5/16
8.41 cm
3 3/8
8.57 cm
3 5/16
8.41 cm
"
3 3/16
8.10 cm
"
2 7/ 8
7.30 cm
"
2 5/ 8
6.67 cm
"
2 5/16
5.87 cm
"
1 15/16
5.08cm
"
1 5/16
3.33cm
5
/16
0.79 cm
13
/16
2.06 cm
1 1/4
3.18 cm
1 3/4
4.45 cm
2 3/8
6.03 cm
3 3/16
8.10 cm
"
"
Designed and shaped by:
6"
"
for 8’6” long boards.
"
"
"
"
"
18
"
45.72 cm
"
14 5/8
37.15 cm
9
"
22.86 cm
Rennie Yater
42
*
Call (310) 225-6774 or visit www.usblanks.com
9'2"A
Overall Bottom Length: 9' 3"
(281.94 cm)
Tip-to-tip Deck Length: 9' 2"
(279.40 cm)
Maximum Width: 22 1/4"
(56.52 cm)
Maximum Thickness: 3 /2"
1
ROCKER
5
"
7 /8
19.37 cm
THICKNESS
1
6"
8 3/4
22.23 cm
"
12 "
12 5/8
32.07 cm
"
18 "
15 3/4 "
3 /8
9.21 cm
"
2 3/16
5.56 cm
2 3/8 "
2 5/8
5
6.03 cm
9
"
1 /16
3.97 cm
2.67 cm
"
"
1 11/16
4.29 cm
13.65 cm
4"
10.16 cm
3.33 cm
"
5 3/8
WIDTH
"
5/16
3"
7.62 cm
24 "
"
Displacement: 3.12 ft³
(8.89 cm)
(88.3 L)
Introduced: September 2006
Available Rockers: Refer to Rocker Catalog
Shaper's Comments:
This newly made 9’2”A blank was lengthened to easily
net a 9’2” bottom length. I redesigned the rail shape
40.01 cm
for less waste and stronger foam, and I also widened
18 "
the nose @12” by ½”, the wide point by 5/8”, and the
45.72 cm
tail @12” by ½”, as to be a more useful blank in this
size/volume range. The new natural rocker in this
1
"
/2
1.27 cm
"
3 3/8
8.57 cm
36 "
21 "
53.34 cm
mold design is the original 9’1”A +3/8” nose, +1/2”
tail. This rocker being shaped in instead of glued up,
will allow for a much more accurate finished rocker,
due to no “spring back.” We have the original 9’1”A
natural rocker if anyone still wants it. All the “A”
"
3 1/2
8.89 cm
Center
22 1/4"
56.52 cm
series blanks are designed to take the majority of
thickness of the bottom, leaving small adjustments
in the nose and tail rocker and their thicknesses.
This blank can be ordered wider or narrower as to
3
/8
"
0.95 cm
36 "
"
24 "
17 1/8
43.50 cm
"
18 "
15 1/8
38.42 cm
"
12 "
12 3/4
32.38 cm
"
6"
9 3/4
24.77 cm
7.94 cm
"
2 5/8
6.67 cm
"
2 3/8
6.03 cm
"
2 1/16
5.24 cm
"
1 11/16
4.29 cm
"
1 3/8
3.49 cm
7
/8
2.22 cm
1 1/4
3.18 cm
1 9/16
3.97 cm
2 1/8
5.40 cm
2 3/4
6.99 cm
allow for stronger decks/rails near the perimeter of
3 1/8 "
"
Designed and shaped by:
20 "
50.80 cm
the board outline, and less waste.
"
"
"
"
6
"
15.24 cm
Pat Rawson
43
*
Call (310) 225-6774 or visit www.usblanks.com
Overall Bottom Length: 9' 3 9/16" (283.37 cm)
93A’X’ also available
+ 3/8” thicker
ROCKER
—1
"
—1
"
19.56 cm
5 1/2
13.97 cm
3 3/4
9.53 cm
"
2 1/2
6.35 cm
"
1 9/16
3.97 cm
3/8
Tip-to-tip Deck Length: 9' 2 5/8" (280.99 cm)
WIDTH
THICKNESS
7 /16"
11
—
"
"
4
"
6"
— 12 5/16"
— 2 1/4 "
12 "
— 17 1/8 "
—2
"
18 "
— 20 1/4 "
—3
"
24 "
— 22
5.72 cm
7/
8
7.30 cm
7/16
8.73 cm
Maximum Width: 25 1/2"
(64.77 cm)
10.16 cm
3.49 cm
11
/16
4.29 cm
9'3"A
Maximum Thickness: 4 5/16"
31.27 cm
(10.95 cm)
“X” VERSION ALSO AVAILABLE
+3/8” THICKER
43.50 cm
Displacement: 4.30 ft³
(121.7 L)
51.44 cm
"
1
/4
56.52 cm
Introduced: July 2008
Available Rockers: Refer to Rocker Catalog
1
/2
"
1.27 cm
—
4"
36 "
— 24
/2"
1
62.23 cm
10.16 cm
Shaper's Comments: I designed the 9’3A to be
a very serious “big guy” longer version of the 8’2A
blank for either high performance, retro’s or fun gun
/16"
1
0.16 cm
"
48 "
— 25
4 5/16"
Center
— 25
4 3/16"
48 "
—
4 1/4
—
—
10.80 cm
10.95 cm
/32"
3
0.24 cm
10.64 cm
"
5/16
64.29 cm
"
1
/2
64.77 cm
25 1/8"
— 63.82
cm
styles. Designed with a performance bottom curve
and enough volume for 375 lb. surfers. It should be
able to yield 9’0 x 24.5 x 4 also with ability to position the overall rocker and nose widths as needed.
Cutting 2” of length off the nose will enable an 18
3/4” nose width at 12” back, and facilitate well for
big guy fish designs. MY SPECIAL THANKS TO
/16"
7
1.11 cm
—3
7/8
"
36 "
— 23
"
7/
8
60.64 cm
9.84 cm
1"
—3
"
24 "
— 21
"
"
—3
"
18 "
— 19
"
"
—2
"
12 "
— 16 15/16"
"
—2
"
6"
— 13
"
"
— 1 3/4 "
—
"
2.54 cm
1 3/8
3.49 cm
1 7/8
4.76 cm
2 7/16
6.19 cm
3 1/16
7.78 cm
3/
8
8.57 cm
1/16
7.78 cm
3
/4
6.96 cm
1/4
5.72 cm
design of this blank and the new 8’2A.
3/8
54.29 cm
7/16
49.37 cm
43.02 cm
5
/8
34.61 cm
8 1/2
21.59 cm
4.45 cm
Designed and shaped by:
BEN AIPA who provided inspiration on the overall
Pat Rawson
44
*
Call (310) 225-6774 or visit www.usblanks.com
9'3"Y
Overall Bottom Length: 9' 3" (281.94 cm)
Tip-to-tip Deck Length: 9' 2 5/8"
ROCKER
4 /16"
5
10.95 cm
3 3/16
8.10 cm
"
1
3/
WIDTH
8"
"
6"
17 1/ 2
44.45 cm
"
12 "
20 5/8
52.39 cm
2"
5.08 cm
"
2 3/8
6.03 cm
"
2 11/16
6.83 cm
"
18 "
22 3/16
56.36 cm
2 7/ 8 "
24 "
23 5/16"
1 1/16"
2.70 cm
Maximum Width: 25 1/16"
(63.66 cm)
3.49 cm
"
2 5/16
5.87 cm
1 5/8
4.13 cm
THICKNESS
(280.99cm)
7.30 cm
Maximum Thickness: 3 1/2"
Displacement: 3.70 ft³
(8.89 cm)
(104.7 L)
"
Introduced: July 2006
59.21 cm
Available Rockers: Refer to Rocker Catalog
"
3
/8
0.95 cm
"
3 1/4
8.26 cm
36 "
"
24 9/16
62.39 cm
Shaper's Comments: The original 10’1’Y was
returned to me and I cleaned it up and the best
/16"
1
0.16 cm
3 3/ 8
"
48 "
3 1/2
"
Center
8.57 cm
/16"
0.16 cm
63.66 cm
24 15/16"
63.34 cm
8.89 cm
1
25 1/16"
3 7/16"
48 "
"
36 "
23 3/8
59.37 cm
"
24 "
21 3/8
54.29 cm
8.73 cm
24 1/2 "
62.23 cm
"
3 1/4
8.26 cm
"
2 15/16
7.46 cm
"
2 11/16
6.83 cm
"
18 "
19 7/8
50.48 cm
"
2 3/8
6.03 cm
"
12 "
17 5/8
44.77 cm
2 9/16
6.51 cm
"
2 1/16
5.24 cm
"
6"
14 3/8
36.51 cm
3 1/4
8.26 cm
"
1 7/16
3.65 cm
1 5/16
3.33 cm
1 13/16
4.60 cm
"
Designed and shaped by:
to machine cut the 9’3”Y, 9’8”Y, and the 10’8”Y
plugs. The natural rocker is about in the middle of
the demand curve. But remember, the further you
change the natural rocker curve the wider the wood
stringer it needed to hold it from spring back.
"
3
/8
0.95 cm
15
/16
2.38 cm
side was scanned. That program has been used
"
"
"
"
"
9 1/4
23.50 cm
Rennie Yater
45
*
Call (310) 225-6774 or visit www.usblanks.com
9'4"B
Overall Bottom Length: 9' 3 1/2"
(283.21 cm)
Tip-to-tip Deck Length: 9' 3 1/16" (282.10 cm)
ROCKER
3
4 /4
"
12.07 cm
3 /2
"
2 1/2
"
1 3/4
"
1
8.89 cm
6.35 cm
4.45 cm
1 3/16"
3.02 cm
WIDTH
THICKNESS
1
"
Maximum Width: 25 1/16"
(63.66 cm)
5/16
3.33 cm
"
1 11/16
4.28 cm
2"
6"
Maximum Thickness: 3 5/16"
17 "
"
12 "
20 5/16
51.59 cm
"
18 "
22 3/16
56.36 cm
2 5/8 "
24 "
5.08 cm
2 3/8
6.03 cm
6.67 cm
(8.41 cm)
43.18 cm
Displacement: 3.42 ft³
(96.7 L)
"
23 7/16 "
Introduced: July 2006
59.53 cm
Available Rockers: Refer to Rocker Catalog
"
7
/16
1.11 cm
3"
36 "
7.62 cm
"
24 13/16
63.02 cm
Shaper's Comments: From the original 9’4”B
plug, with thickness added to the tail area of the
/16"
1
.16 cm
3 1/4 "
48 "
3 5/16"
Center
8.26 cm
8.41 cm
"
3
/32
.24 cm
"
7
/16
1.11 cm
3 1/4
8.26 cm
"
3"
7.62 cm
25 1/16"
63.66 cm
24 7/8 "
63.18 cm
24 1/8
61.28 cm
36 "
22 5/8
57.47 cm
24 "
20 1/4
51.44 cm
1 9/16"
2 3/8
6.03 cm
"
18 "
18 9/16
47.15 cm
2 1/8 "
2 1/8
5.40 cm
"
12 "
16 5/16
41.43 cm
6"
13 1/4
33.66 cm
2 3/4 "
1 3/4
4.45 cm
"
"
1 1/2
3.81 cm
"
6.96 cm
3 1/2
8.89 cm
Designed and shaped by:
well with this blank.
"
"
5.40 cm
Bottom rockers from the previous 9’4”B will work
"
2 5/8
6.67 cm
3.97 cm
close tolerance for strength, will net 24” x 3 1/8“.
"
48 "
1 3/32"
2.78 cm
deck to make it a more shaper friendly blank,
"
"
"
"
7 1/2
19.05 cm
Bruce Jones
46
*
Call (310) 225-6774 or visit www.usblanks.com
9'5"M
Overall Bottom Length: 9' 4 7/16" (285.59 cm)
Tip-to-tip Deck Length: 9' 3 3/4" (283.85 cm)
ROCKER
4
/16"
13
THICKNESS
1 3/8
"
12.22 cm
3.49 cm
3 7/16"
1 3/4
4.45 cm
2 7/16"
2 1/16
5.24 cm
"
2 3/8
6.03 cm
"
2 5/8
6.67 cm
8.73 cm
6.19 cm
1
3
/4
4.45 cm
1 3/16
3.02 cm
WIDTH
"
"
6"
16 5/8
42.23 cm
"
12 "
20 1/4
51.44 cm
"
18 "
22 /8 "
"
24 "
Maximum Width: 24 11/16"
(62.71 cm)
Maximum Thickness: 3 3/16"
(8.10 cm)
"
Displacement: 3.27 ft³
(92.7 L)
1
56.20 cm
Introduced: August 2007
"
23 3/16
58.90 cm
Available Rockers: Refer to Rocker Catalog
"
7
/16
1.11 cm
"
2 15/16
7.46 cm
36 "
"
24 7/16
62.07 cm
Shaper's Comments: This is a versatile high
performance longboard blank designed to ac-
"
1
/16
0.16 cm
"
3 3/16
8.10 cm
48 "
3 3/16"
Center
/16"
0.16 cm
"
7
/16
1.11 cm
24 7/16"
62.07 cm
8.10 cm
1
"
24 11/16
62.71 cm
3 3/16"
48 "
23 7/ 8 "
"
36 "
22 7/16
56.99 cm
8.10 cm
3
7.62 cm
24 "
20 1/16
50.96 cm
1 9/16"
2 7/16
6.19 cm
"
18 "
18 5/16
46.51 cm
"
2 1/8
5.40 cm
"
12 "
"
1 3 /4
"
6"
"
1 3/8
3.49 cm
2 13/16
7.14 cm
3 5/8
9.21 cm
4.45 cm
"
Designed and shaped by:
slightly more volume in the nose and tail to allow
more rocker to be shaped in if desired.
"
"
2 1/8
5.40 cm
toward the tail to ensure maximum strength. It has
"
2 11/16
6.83 cm
3.97 cm
The deck is moderately flat with a slight taper out
60.64 cm
1 1/8 "
2.86 cm
commodate both machine and hand shaping.
"
16 "
40.64 cm
"
12 3/4
32.39 cm
6
"
15.24 cm
Matt Yerxa
47
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
4 1/2
11.43 cm
3 /16"
5
8.41 cm
2 3/8
6.03 cm
"
1 11/16
4.29 cm
1 1/ 8
2.86 cm
"
"
"
7
/16
1.11 cm
THICKNESS
WIDTH
9'8"Y
Overall Bottom Length: 9' 8 1/8"
(294.96 cm)
Tip-to-tip Deck Length: 9' 7 3/4"
(294.01 cm)
"
1 5/8
4.13 cm
Maximum Width: 25 1/4"
2 1/8 "
6"
2 1/ 2 "
12 "
2 13/16
7.14 cm
"
18 "
22 3/16"
"
24 "
23 5/16"
5.40 cm
6.35 cm
3
7.62 cm
"
3 1/4
8.26 cm
36 "
(64.14 cm)
17 /16"
5
43.97 cm
20 3/ 4 "
Maximum Thickness: 3 5/8"
(9.21 cm)
52.71 cm
56.36 cm
59.21 cm
"
24 5/8
62.55 cm
Displacement: 4.19 ft³
(118.7 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: The original 10’1’Y was
/16"
1
0.16 cm
3 1/2
8.89 cm
"
3 5/8
9.21 cm
"
48 "
"
25 1/4
64.14 cm
returned to me and I cleaned it up and the best
side was scanned. That program has been used
to machine cut the 9’3”Y, 9’8”Y, and the 10’8”Y
Center
3
"
25 /16
63.98 cm
plugs. The natural rocker is about in the middle of
the demand curve. But remember, the further you
"
1
/8
3 9/16"
48 "
"
36 "
23 1/2
59.69 cm
24 "
21 1/2
54.61 cm
0.38 cm
9.05 cm
"
3 3/8
8.57 cm
1
/2
1.27 cm
"
1 1/8
2.86 cm
3"
7.62 cm
24 5/8 "
62.55 cm
"
2 3/4
6.96 cm
"
18 "
19 3/4
50.17 cm
"
2 1/2
6.35 cm
"
12 "
5
17 / 8
44.77 cm
"
2 3/16
5.56 cm
"
6"
14 1/4
36.20 cm
"
1 1/2
3.81 cm
2 1/8
5.40 cm
2 3/4
6.99 cm
3 5/8
9.21 cm
"
Designed and shaped by:
stringer it needed to hold it from spring back.
"
"
1 5/ 8
4.13 cm
change the natural rocker curve the wider the wood
"
"
"
"
9 1/8
23.18 cm
Rennie Yater
48
*
Call (310) 225-6774 or visit www.usblanks.com
99A’X’ also available +3/8” thicker
ROCKER
THICKNESS
WIDTH
7 /16
19.53 cm
"
"
5 7/16
13.81 cm
"
1 3/4
4.46 cm
"
6"
8 5/8
21.91 cm
3 3/4 "
2 1/8
"
12 "
12 7/16"
"
18 "
15 5/16
38.89 cm
24 "
17 /8 "
9.53 cm
5.40 cm
"
2 1/2
6.35 cm
1 11/16"
2 15/16
7.46 cm
2 1/2
6.35 cm
4.29 cm
"
Overall Bottom Length: 9' 9 1/4"
(297.82 cm)
Tip-to-tip Deck Length: 9' 8 3/8"
(295.59 cm)
Maximum Width: 22 7/16"
1 3/8
3.49 cm
11
9'9"A
3"
7.62 cm
"
31.59 cm
"
5
44.77 cm
(56.99 cm)
Maximum Thickness: 3 11/16"
(9.37 cm)
“X” VERSION ALSO AVAILABLE
+3/8” THICKER
Displacement: 3.23 ft³
(91.5 L)
Introduced: September 2006
Available Rockers: Refer to Rocker Catalog
Shaper's Comments:
This newly made 9’9”A blank was lengthened to
easily net a 9’9” bottom length. I redesigned the rail
shape for less waste and stronger foam, and I also
/8 "
5
1.59 cm
"
3 3/8
8.57 cm
36 "
20 11/16"
52.55 cm
widened the nose @12” by ½”, the wide point by ¼”,
and the tail @12” by ½” as to be a more useful blank
in this size/volume range. The new natural rocker in
5
/32"
0.40 cm
"
3 5/8
9.21 cm
48 "
22
3/16
56.36 cm
"
this mold design is the 9’9”A +3/8” nose, +1/2” tail.
This rocker being shaped in instead of glued up,
"
3 5/8
9.21 cm
Center
"
22 7/16
56.99 cm
will allow for a much more accurate finished rocker,
due to no “spring back.” I have the old 9’9”A natural
rocker if anyone still wants it. All the “A” series blanks
1
"
/8
0.32 cm
7
"
3 /16
8.73 cm
48 "
"
3
21 /4
55.25 cm
are designed to take the majority of thickness off the
bottom, leaving small adjustments in the nose and
tail rocker and their thicknesses. This blank can be
1
"
/2
1.27 cm
1
"
3 /16
7.78 cm
36 "
1
"
20 /16
50.96 cm
ordered wider or narrower as to allow for stronger
decks/rails near the perimeter of the board outline,
and less waste.
1
24 "
"
18 "
15 1/4
38.74 cm
"
12 "
12 3/4
32.39 cm
"
6"
9 13/16
24.92 cm
2 /8
6.67 cm
"
2 5/16
5.87 cm
1 1/2
3.81 cm
"
1 15/16
4.92 cm
2 1/2
"
17 3/16
43.66 cm
"
1 /8
2.86 cm
5
2
5.08 cm
"
1 3/4
4.45 cm
"
1 7/16
3.65 cm
6.35 cm
3 1/8
7.94 cm
"
Designed and shaped by:
"
"
"
"
"
5 1/2
13.97 cm
Pat Rawson
49
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
7
4 /16
11.27 cm
THICKNESS
1
1/4
1
13
3.18 cm
"
8.57 cm
4.60 cm
1
"
2 1/4
5.72 cm
3
/4
4.45 cm
"
1
"
2
/2
6.35 cm
1
/4
3.18 cm
1
Overall Bottom Length: 9' 9 5/8" (298.77 cm)
6"
(297.50cm)
(63.34 cm)
41.59 cm
"
12 "
19 15/16
50.64 cm
2 11/16
6.83 cm
"
18 "
7
21 / 8
55.56 cm
"
24 "
3
Maximum Width: 24 15/16"
16 3/8 "
"
7.62 cm
Tip-to-tip Deck Length: 9' 9 1/8"
WIDTH
"
/16"
3 3/8
9'9"B
1
Maximum Thickness: 3 3/4"
"
Displacement: 4.022 ft³
(9.53 cm)
(113.9 L)
"
23 /16
58.58 cm
Introduced: July 2006
"
3 1/2
8.89 cm
"
36 "
"
3/4
"
48 "
1
/2
1.27 cm
"
24 7/16
62.07 cm
Available Rockers: Refer to Rocker Catalog
Shaper's Comments: Intended for longboard
3
/32
.24 cm
3
9.53 cm
15
24 /16
63.34 cm
"
shapes from 9’2” to 9’6”, this is a close tolerance
blank that will net 24” x 3 1/4 “ maximum dimen-
3 11/16"
24 13/16"
Center
9.37 cm
63.02 cm
sions. Natural rocker will make a nice all-around
longboard shape. Rockers from the previous 9’8”
will work well with this blank.
/8
.32 cm
"
3 5/8
9.21 cm
"
48 "
24 1/4
61.60 cm
1
/2
1.27 cm
"
3 5/16
8.41 cm
"
36 "
22 7/ 8
58.10 cm
"
2 7/ 8
7.30 cm
"
24 "
9
20 /16
52.23 cm
1
"
2 9/16
6.51 cm
"
18 "
18 7/8
47.94 cm
3
/8
6.03 cm
"
2 1/4
5.72 cm
"
12 "
16 7/16
41.75 cm
"
1 7/8
4.76 cm
"
6"
"
1 7/16
3.65 cm
"
1
3
/16
3.02 cm
1
11
/16
4.29 cm
2
3
/16
8.10 cm
3
1
/8
10.48 cm
4
Designed and shaped by:
"
"
"
"
"
13 "
33.02 cm
"
1
7 /2
19.05 cm
Bruce Jones
50
*
102B’X’ also available +1/4” thicker
ROCKER
THICKNESS
Overall Bottom Length: 10' 2 1/4" (310.52 cm)
WIDTH
4
"
1 3/8
3.49 cm
"
5
/8
9.21 cm
"
1 7/8
4.76 cm
"
6"
"
12 "
"
18 "
22 5/16
56.67 cm
2 15/16"
24 "
7
23 /16"
13/
16
12.22 cm
3
2
"
5
/8
6.67 cm
1
/8 "
7
4.76 cm
1
/16"
5
3.33 cm
2
5/16
5.87 cm
2 11/16
6.83 cm
7.46cm
10'2"B
Tip-to-tip Deck Length: 10' 1 1/2" (308.61 cm)
"
17 1/2
44.45 cm
20
"
Maximum Width: 25 3/16"
52.71 cm
"
59.53 cm
Maximum Thickness: 3 1/2"
"
5
/32"
0.40 cm
"
36 "
3 7/16"
48 "
3 1/4
8.26 cm
8.73 cm
"
24 5/8
62.63 cm
25 3/16"
(8.89 cm)
“X” VERSION ALSO AVAILABLE
+1/4” THICKER
Displacement: 4.26 ft³
9
/16
1.43 cm
(63.98 cm)
3/4
(120.6 L)
Introduced: July 2006
Available Rockers: Refer to Rocker Catalog
63.98 cm
Shaper's Comments: Intended for longboard
shapes from 9’8” to 10’0”, this is a close tolerance
3 1/2
8.89 cm
"
Center
"
25 1/8
63.82 cm
blank to net 24” x 3 3/8“ maximum dimensions.
Rockers from the previous 10’1” will work well
with this blank. 10’1”Y natural rocker is available
1
/16"
0.16 cm
3 7/16
8.73cm
"
48 "
1
24 /2
62.23 cm
"
"
"
3 1/4
8.26 cm
"
36 "
23 7/16
59.53 cm
"
2 7/8
7.30 cm
"
24 "
3
21 /8
54.29 cm
"
2 5/8
6.67 cm
"
18 "
19 13/16
50.32 cm
1
13
/16
4.60 cm
"
2 1/4
5.72 cm
"
12 "
17 9/16
44.61 cm
2 1/2
6.35 cm
"
1 13/16
4.60 cm
"
6"
14 1/4
36.20 cm
7
/16
8.73 cm
"
1 5/16
3.33 cm
3
/8
0.95 cm
15
/16
2.38 cm
1 5/16
3.33 cm
3
"
Designed and shaped by:
for this blank.
"
"
"
"
"
9 1/4
23.50 cm
Bruce Jones
51
106A’X’ also available +1/2” thicker
ROCKER
8 3/16"
20.80 cm
THICKNESS
8 /16
21.43 cm
"
12 "
12 3/8
31.43 cm
"
18 "
15 /8
39.05 cm
2 15/16"
24 "
17 3/4 "
2 1/8
5.40 cm
"
7.94 cm
2 3/16"
5.56 cm
3
1
2 /2
6.35 cm
7.46 cm
7
Tip-to-tip Deck Length: 10' 5 7/8" (319.72 cm)
(58.90 cm)
Maximum Thickness: 3 /4"
3
(9.53 cm)
“X” VERSION ALSO AVAILABLE
"
3
Overall Bottom Length: 10' 6 3/4" (321.95 cm)
Maximum Width: 23 3/16"
"
6"
"
3 /8
10.16 cm
"
1 /4
4.45 cm
1
4"
3.65 cm
"
4 7/16
11.27 cm
WIDTH
1 7/16"
6 /32
15.64 cm
5
*
10'6"A
+1/2” THICKER
"
Displacement: 3.77 ft³
(106.8 L)
Introduced: September 2006
Available Rockers: Refer to Rocker Catalog
45.09 cm
Shaper's Comments:
1"
2.54 cm
"
7
3 /16
8.73cm
36 "
This newly made 10’6”A blank was lengthened to
"
21 1/16
53.50 cm
easily net a 10’6” bottom length. Using parts of the
old 10’6” as a start, I kept the rail shape the same
5
/16"
0.79 cm
3 3/4 "
9.53 cm
48 "
"
13/
16
57.94 cm
22
for less waste and stronger foam, and widened the
point by 3/8”. The new natural rocker in this mold
design is the 10’6”A +5/8” nose, +3/4” tail. This
rocker being shaped in instead of glued up, will
"
3 3/4
9.53 cm
Center
allow for a much more accurate finished rocker,
"
23 3/16
58.90 cm
due to no “spring back.” I have the old 10’6” natural
rocker if anyone still wants it. All the “A” series of
blanks are designed to take the majority of thick-
1
"
/4
0.64 cm
"
1
3 /2
8.89 cm
48 "
7
21 /8
55.56 cm
"
ness off the bottom, leaving small adjustments
in the nose and tail rocker and their thicknesses.
This blank can be ordered wider or narrower as to
"
3
/4
1.91 cm
3 1/16
7.78 cm
"
24 "
16 3/4
42.55 cm
2 5/16
5.87 cm
"
18 "
14 3/4
37.47 cm
2"
12 "
12 3/8
31.43 cm
6"
9 3/8
23.81 cm
"
2 9/16
6.51 cm
"
15
/16
4.92 cm
2 3/8 "
6.03 cm
5.08 cm
"
2 7/ 8
7.30 cm
"
1 13/16
4.60 cm
"
1 1/2
3.81 cm
3 7/16
8.73 cm
"
19 13/16
50.32 cm
"
1 1/2
3.81 cm
1
36 "
"
Designed and shaped by:
allow for stronger decks/rails near the perimeter
of the board outline, and less waste.
"
"
"
"
6"
Pat Rawson
15.24 cm
52
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
5 1/4
13.34 cm
3 15/16"
THICKNESS
WIDTH
"
1 9/16
3.97 cm
2 1/8
"
6"
17
5.40 cm
"
2 9/16
6.51 cm
"
12 "
20 1/ 2
52.07 cm
"
2 7/8
7.30 cm
"
18 "
22 3/16
56.36 cm
24 "
23 5/16
59.21 cm
15
/16
7.46 cm
2
2 3/16
5.56 cm
9
1 /16
3.97cm
"
"
1/
3 8
7.94 cm
Overall Bottom Length: 10' 7 7/8" (324.80 cm)
Tip-to-tip Deck Length: 10' 7 5/16" (323.37 cm)
"
10.00 cm
10'8"Y
43.18 cm
"
Maximum Width: 25 1/2"
"
Maximum Thickness: 3 3/4"
"
36 "
24 11/16
62.71 cm
"
48 "
7
"
3 7/16
8.73 cm
"
3 9/16
9.05 cm
(9.53 cm)
"
Displacement: 4.77 ft³
11
/16
1.75 cm
(64.77 cm)
"
(135.2 L)
Introduced: September 2006
Available Rockers: Refer to Rocker Catalog
1
/4
0.64 cm
"
25 /16
64.61 cm
Shaper's Comments: The original 10’1’Y was
returned to me and I cleaned it up and the best
side was scanned. That program has been used
"
3 3/4
9.53 cm
Center
25
/2 "
1
to machine cut the 9’3”Y, 9’8”Y, and the 10’8”Y
64.77 cm
plugs. The natural rocker is about in the middle of
the demand curve. But remember, the further you
change the natural rocker curve the wider the wood
/16"
3
3 5/8 "
48 "
24 9/16
62.39 cm
"
36 "
23 1/4
59.06 cm
"
24 "
21 3/16
53.82 cm
"
"
18 "
19 9/16
49.69 cm
"
"
12 "
17 3/8
44.13 cm
"
6"
14 3/16
36.04 cm
0.48 cm
9.21 cm
"
3 1/2
8.89 cm
"
3 1/8
7.94 cm
"
2 7/8
7.30 cm
"
2 1/2
6.35 cm
"
2 3/16
5.56 cm
"
1 1/2
3.81 cm
9
/16
1.43 cm
1 1/4
3.18 cm
1 5/ 8
4.13cm
2 3/16
5.56 cm
13
/16
7.14 cm
2
3 5/8
9.21 cm
"
Designed and shaped by:
"
stringer it needed to hold it from spring back.
"
"
"
"
8 1/4
20.96 cm
Rennie Yater
53
*
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
5 1/8
13.02 cm
"
—
1 7/8
4.76 cm
—2
"
6"
— 21
"
"
—2
"
12 "
— 25
"
"
—3
"
18 "
— 27
"
"
—
"
24 "
— 29 "
10.48 cm
7.94 cm
2 5/16
5.87 cm
11
WIDTH
"
4 1/8
3 1/8
THICKNESS
1 /16
4.29 cm
3/
8
6.03 cm
7/
8
7.30 cm
1/
4
8.26 cm
3 5/8
9.21 cm
1/
4
53.98 cm
3
/8
64.45 cm
9/
16
70.01 cm
10'10"T
Overall Bottom Length: 10' 9 3/8" (328.61 cm)
Tip-to-tip Deck Length: 10' 9" (327.66 cm)
Maximum Width: 32 1/16"
(81.44 cm)
Maximum Thickness: 5"
(12.70 cm)
73.66 cm
Displacement: 8.31 ft³
"
11
/16
1.75 cm
—4
5/
16
10.95 cm
"
36 "
— 30 11/16 "
—
"
48 "
— 31
77.95 cm
(235.3 L)
Introduced: August 2008
Available Rockers: Refer to Rocker Catalog
3
"
/16
0.48 cm
4 3/4
12.07 cm
3
/4
80.65 cm
"
Shaper's Comments:
I tried to make this Stand Up blank as versatile
as possible. It has plenty of width and thickness
—
"
5
Center
— 32 1/16"
81.44 cm
12.70 cm
to do just about anything in a Stand Up Paddle
surfboard. The rocker should also allow shapers
a wide range of options.
1
/4
0.64 cm
"
—4
3/
4
12.07 cm
"
48 "
— 31 1/16 "
"
—4
1
/2
11.43 cm
"
36 "
— 29
"
"
—4
"
24 "
— 26
"
"
— 3 13/16"
18 "
— 24
"
—3
"
12 "
— 21 15/16"
"
—
"
6"
— 18 11/16"
"
—2
11
/16
1.75 cm
1 5/16
3.33 cm
1 11/16
4.29 cm
2 1/16
5.24 cm
9
/16
6.51 cm
2
3 1/16
7.79 cm
1/
16
10.32 cm
9.68 cm
9
/16
9.05 cm
3 1/4
8.26 cm
"
11/
16
6.83 cm
Designed and shaped by:
78.90 cm
1/
2
74.93 cm
5/8
67.63 cm
"
9
/16
62.39 cm
55.72 cm
47.47 cm
—
Jeff Timpone
13
"
33.02 cm
54
"
5 3/8
13.65 cm
"
4 1/4
10.80 cm
3 /16
8.41 cm
"
2 1/2
"
5
6.35 cm
1 7/8
4.76 cm
"
THICKNESS
"
1 7/16
3.65 cm
2"
Overall Bottom Length: 11' 2 1/2" (341.63 cm)
6"
5.08 cm
"
12 "
2 7/8
7.30 cm
"
18 "
3 1/4
8.26 cm
"
24 "
2
7/16
6.19 cm
*
WIDTH
11'3"D
15 5/8 "
39.69 cm
19
Maximum Width: 26 7/8 "
"
9/16
49.69 cm
"
21 7/8
55.56 cm
23
1/2
Tip-to-tip Deck Length: 11' 2" (340.36 cm)
(68.26 cm)
Maximum Thickness: 4 7/32"
Displacement: 5.74 ft³
(10.72 cm)
(162.7 L)
Introduced: January 1990. Has proved to be as
"
59.69 cm
versatile as outlined in comments. Good proportions for long guns.
Available Rockers: Refer to Rocker Catalog
"
13
/16
2.06 cm
3
"
13/16
9.68 cm
36 "
5/
"
25 8
65.09 cm
Shaper's Comments: “Shaper’s Delight” will yield
an excellently proportioned 10’6”. When finished,
"
1
/4
0.64 cm
"
4 1/8
10.48 cm
48 "
26
1/2
"
67.31 cm
it will easily float persons up to 250 lbs. An excellent rental board. Nose rocker can be adjusted
up to 6 1/2 “ or lowered to 4 1/2 “. Tail rocker can
be adjusted up to 1” or down 1/2 “. Excellent fam-
4 3/16"
Center
10.64 cm
26 7/8"
68.26 cm
ily board. Perfect San Onofre board or for those
crowded days at your favorite point break. Great
for giving lessons. Perfect for noseriding. May be
used for guns with rocker adjustment and width
removed from center prior to gluing. Suggested
3
/16"
0.48 cm
4 1/16"
10.32 cm
48 "
26 1/16"
66.20 cm
minimum stringer thickness: 3/16 “.
Special note: All rockers for this blank will not fit
on redwood or cedar.
9
/16
1.43 cm
"
3 3/4
9.53 cm
"
36 "
1 1/8
2.86 cm
"
3 3/8
8.57 cm
"
24 "
22 1/8
56.20 cm
1 9/16
3.97 cm
"
3 1/16
7.78 cm
"
18 "
20 5/16
51.59 cm
2 1/16
5.24 cm
"
2 11/16
6.83 cm
12 "
17 9/16
44.61 cm
2 5/8
6.67 cm
"
2 5/16
5.87 cm
6"
13 5/8
34.61 cm
3 1/4
8.26cm
"
1 5/8
4.13 cm
"
"
"
Designed and shaped by:
"
24 5/8
62.55 cm
"
"
"
"
"
7 1/2
19.05 cm
George Downing & Dale Velzy
55
ROCKER
"
8 1/2
21.59 cm
THICKNESS
"
12 5/8
32.07 cm
"
12 "
16 9/16
42.07 cm
2 13/16"
18 "
18 7/8
47.94 cm
"
24 "
20 1/ 2
52.07 cm
"
36 "
2 3/8
6.03 cm
8.73 cm
"
6"
"
3 7/16"
Overall Bottom Length: 11' 2 1/2" (341.63 cm)
"
1 11/16
4.29 cm
4 3/4
12.07 cm
*
WIDTH
1 3/8
3.49 cm
"
6 7/16
16.35 cm
11'3"d-g
7.14 cm
2 3/8
6.03 cm
"
3 3/16
8.10 cm
1
"
13/16
Tip-to-tip Deck Length: 11' 1 1/2" (339.09 cm)
"
"
"
Maximum Width: 24"
(60.96 cm)
Maximum Thickness: 4 3/16"
Displacement: 5.05 ft³
1 /16
2.70 cm
3
9.68 cm
5/
(10.64 cm)
(143.0 L)
"
22 8
57.47 cm
Introduced: August 2009
"
5
/16
0.31 cm
"
4 1/16
10.32 cm
48 "
"
23 1/2
59.69 cm
Rockers: 11’3 DG Rocker (10’6A matched Bottom to Nose and Tail)
Shaper's Comments: This blank is a 3” nar4 3/16"
Center
10.64 cm
"
1
/4
0.64 cm
4"
10.16 cm
"
24
60.96 cm
23 1/16
58.58 cm
21 5/8
54.93 cm
"
3 3/4
9.53 cm
"
36 "
1 3/8
3.49 cm
"
3 5/16
8.41 cm
"
24 "
19 1/8
48.58 cm
1 13/16
4.60 cm
"
18 "
17 5/16
43.97 cm
"
12 "
14 9/16
36.99 cm
"
6"
10 5/8
26.99 cm
"
2 11/16
6.83 cm
"
2 1/4
5.72 cm
"
1 3/16
3.02 cm
2 5/16
5.87 cm
2 15/16
7.46 cm
3"
3 5/8
9.21 cm
"
Designed and shaped by:
rocker.
"
48 "
5
/8
1.59 cm
7.62 cm
rower version of the 11’3D with appropriate gun
"
"
"
"
"
"
4 1/2
11.43 cm
George Downing & Dale Velzy
56
ROCKER
"
6 5/16
16.03 cm
"
4 11/16
11.91 cm
"
1
3 /2
8.89 cm
2 1/2 "
6.35 cm
1 11/16
4.29 cm
"
11
"
THICKNESS
"
2"
Overall Bottom Length: 11' 2 1/2" (341.63 cm)
6"
"
12 "
2 7/8
"
18 "
3 1/4
8.26 cm
"
24 "
"
36 "
2
7/16
6.19 cm
7.30 cm
*
WIDTH
1 7/16
3.65 cm
5.08 cm
11'3"d-s
"
18 5/ 8
47.31 cm
22
Tip-to-tip Deck Length: 11' 2" (340.36 cm)
"
9/16
57.31 cm
24 7/ 8"
Maximum Width: 29 15/16"
63.18 cm
"
26 1/2
67.31 cm
Maximum Thickness: 4 7/32"
Displacement: 6.48 ft³
/16
1.75 cm
13
3 /16
9.68 cm
(76.04 cm)
5/
(10.72 cm)
(183.4 L)
"
28 8
72.71 cm
Introduced: August 2009
"
3
/16
0.48 cm
"
4 1/8
10.48 cm
48 "
"
29 1/2
74.93 cm
Rockers: SUP (+1” N last 18”)
Shaper's Comments: This blank is a 3” wider
version of the 11’3D with appropriate Stand-Up
4 3/16"
Center
29 7/ 8 "
75.88 cm
10.64 cm
"
48 "
29 1/16
73.82 cm
3 3/4
9.53 cm
"
36 "
27 5/8
70.17 cm
"
3 3/ 8
8.57 cm
"
24 "
25 1/8
63.82 cm
1 1/2
3.81 cm
"
3 1/16
7.78 cm
"
18 "
23 5/16
59.21 cm
2 1/16
5.24 cm
"
2 11/16
6.83 cm
"
12 "
20 9/16
52.23 cm
2 9/16
6.51 cm
"
2 5/16
5.87 cm
"
6"
16 5/8
42.23 cm
"
1 5/8
4.13 cm
"
4 1/16
10.32 cm
9
/16
1.43 cm
"
1 1/8
2.86 cm
3
/16
0.48 cm
3 1/8
7.97 cm
"
Designed and shaped by:
rocker.
"
"
"
"
"
"
"
10 1/2
26.67 cm
George Downing & Dale Velzy
57
Superfused EPS
After extensive research and development US Blanks is proud to announce the introduction of our Superfused Molded EPS. Our proprietary bead and revolutionary molding and production techniques have
allowed us to develop a surfboard specific product that is superior to any other EPS foam on the market
today. Our newly developed EPS technology allows us to achieve superior bead fusion, consistency and
quality. Combined with our progressive new mold designs, we have taken epoxy board building to a whole
new level.
What makes US Blanks Superfused EPS different? Unlike most other manufacturers our blanks are
shape molded under extreme pressure. This allows for superior penetration and bead fusion during the
molding process that cannot be achieved in block molding. Combined with our proprietary bead and industry leading production techniques, our process generates fusion characteristics that simply cannot be
achieved through other methods. The tight fusion means the foam is considerably more air tight and water
tight than any of its predecessors thus eliminating the need for taping or spackling before machining, or
spackling / seal coating before glassing. As a result it glasses up lighter and stronger as it absorbs less
resin but maintains a superior mechanical bond due to its incredible surface properties.
Our shape molded blanks result in less work for the shaper as our outlines, rockers, and crowned decks
allow the craftsman to zero in on the finished shape much more quickly and easily. Our molding capabilities also allow us to produce each blank size in different thicknesses which means you can chose the
blank that best suits your shape while cutting down on shaping time and waste.
Due to the incredible strength and memory characteristics of EPS foam many shapers have experienced
“spring back” problems in the past when applying forced rocker adjustments to this particular type of foam.
By not applying any post induced surface tensions we have eliminated these known “spring back” problems. We accomplish this by starting with an excellent rocker along with increased volume in the nose and
tail areas allowing the shaper to accommodate proprietary custom rocker configurations without having to
make physical adjustments during the glue up process.
Another extremely important aspect of shape molding is the fact that it cuts down on waste and all EPS
scraps are 100% recyclable. Please do your part and check with your local city to see if they offer a recycling program which you can participate in.
Most of our sizes are offered in both 1.7 pcf and 2.0 pcf densities. Combined with our variable thickness
capabilities, US Blanks Superfused EPS has quickly become the most user friendly, versatile, industry
leading EPS on the market, and has set a new standard world wide.
58
6'5"EPs
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
Overall Bottom Length: 6' 5 13/16" (197.64 cm)
max. thickness 2-1/2”
ROCKER
"
"
1 1/8
2.86 cm
3 3/8
8.57 cm
"
1 3/8
3.49 cm
1 7/8
4.76 cm
"
1
"
7
/16
1.11 cm
"
WIDTH
THICKNESS
5 1/2
13.97 cm
2.54 cm
Tip-to-tip Deck Length: 6' 4 13/16" (195.10 cm)
"
"
1 3/4
4.45 cm
"
2 1/16
5.24 cm
"
2 1/4
3
12 "
18 "
24 "
5.72 cm
(51.75 cm)
"
7.62 cm
6"
Maximum Width: 20 3/8"
Maximum Thickness: 2 1/2"
(6.35 cm)
"
9 1/2
24.13 cm
Displacement: Forthcoming
"
13 9/16
34.45 cm
Introduced: October 2007
"
16 3/8
41.59 cm
Rockers: Natural
"
18 7/16
46.83 cm
Available Densities: 1.7 PCF and 2.0 PCF
Shaper's Comments: This blank is designed
for high performance short boards up to 20-1/4”
"
2 1/2
6.35 cm
Center
"
20 3/8
51.75 cm
in width. At 2-1/’2” thick it is perfectly suited for
the hand shaper, and still works well for machine
shapes due to the increased volume in the nose
and tail.
5
/16
0.79 cm
"
5
/8
0.79 cm
"
2 1/8
5.40 cm
1 1/16
2.7 cm
"
1 7/8
4.76 cm
1 5/8
4.13 cm
"
1 1/2
3.81 cm
2 3/8
6.03 cm
"
1 1/8
2.86 cm
24 "
— 18
"
"
18 "
— 17
"
"
12 "
—
"
"
Designed and shaped by:
6"
7/8
47.94 cm
1/4
43.82 cm
15
"
38.1 cm
— 11
"
—
"
7/
8
30.16 cm
6 1/2
16.51 cm
Eric Arakawa
59
6'5x"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
“X” model
Max. thickness 2-3/4”
ROCKER
"
THICKNESS
1 3/8
3.49 cm
3 3/8
8.57 cm
"
1 5/8
4.13 cm
1 7/8
4.76 cm
"
1
"
7
/16
1.11 cm
"
Tip-to-tip Deck Length: 6' 4 13/16" (195.10 cm)
WIDTH
"
5 1/2
13.97 cm
2.54 cm
Overall Bottom Length: 6' 5 13/16" (197.64 cm)
"
"
2
5.08 cm
"
2 5/16
5.87 cm
"
2 1/2
6.51 cm
3
12 "
18 "
24 "
(51.75 cm)
"
7.62 cm
6"
Maximum Width: 20 3/8"
Maximum Thickness: 2 3/4"
(6.99 cm)
"
9 1/2
24.13 cm
Displacement: Forthcoming
"
13 9/16
34.45 cm
Introduced: October 2007
"
16 3/8
41.59 cm
Rockers: Natural
"
18 7/16
46.83 cm
Available Densities: 1.7 PCF and 2.0 PCF
Shaper's Comments:
At 2-3/4” maximum
thickness, this blank is identical to the previous
"
2 3/4
6.99 cm
Center
"
20 3/8
51.75 cm
version with 1/4” additional thickness along the
entire length. Designed for high performance
short boards up to 20-1/4” in width, and will also
accommodate small Fish models due to the extra
thickness. An ideal blank for machine shaping.
"
24 "
— 18
"
"
18 "
— 17
"
"
12 "
—
"
6"
5
/16
0.79 cm
"
2 5/8
6.67 cm
5
/8
0.79 cm
"
2 3/8
6.03 cm
1 1/16
2.7 cm
"
2 1/8
5.40 cm
1 5/8
4.13 cm
"
1 3/4
4.45 cm
2 3/8
6.03 cm
"
1 3/8
3.50 cm
"
Designed and shaped by:
7/8
47.94 cm
1/4
43.82 cm
15
"
38.1 cm
— 11
"
—
"
7/
8
30.16 cm
6 1/2
16.51 cm
Eric Arakawa
60
6'8"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
max. thickness 2-7/8”
ROCKER
5 3/8 "
WIDTH
THICKNESS
4"
/16"
15
2.38 cm
3 5/16"
1 5/16"
6"
1 7/8 "
1 13/16"
12 "
"
2 1/4 "
18 "
"
2 1/2 "
24 "
8.41 cm
4.76 cm
1
2.54 cm
1
/2
1.27 cm
4.60 cm
5.72 cm
6.35 cm
(205.74 cm)
Tip-to-tip Deck Length: 6' 8"
(203.20 cm)
Maximum Width: 21 7/16"
(54.45 cm)
10.16 cm
13.65 cm
3.33 cm
Overall Bottom Length: 6' 9"
10 5/8 "
Maximum Thickness: 2 7/8"
(7.30 cm)
26.99 cm
14 9/16"
Displacement: Forthcoming
36.99 cm
17 3/8"
Introduced: February ‘08
44.13 cm
19 3/8"
Rockers: Natural
49.21 cm
Available Densities: 1.7 PCF and 2.0 PCF
/16"
1
0.16 cm
"
36 "
"
Center
"
36 "
13/
16
7.14 cm
2
2 7/8
7.32 cm
"
1
/32
0.08 cm
13
/16
7.14 cm
2
21 1/4"
53.98 cm
21
/16"
7
54.45 cm
"
21 5/16
54.13 cm
Shaper's Comments: Designed for versatility to
accommodate a wide range of board styles from
Fishes to Big Guy short boards. The manufacturing process ensures uniform density and fusion
throughout, thus allowing the shaper to use the
maximum width of the blank if necessary.
A
closer tolerance version to yeild a quick shape
"
"
2 9/16"
24 "
19 5/8
49.85 cm
3
/4
1.91 cm
"
2 5/16"
18 "
17 3/16
43.66 cm
1 3/32"
1 7/8 "
12 "
15 5/8
39.69 cm
1 11/16"
1 3/8 "
6"
12 1/4
31.12 cm
3
/8
0.95 cm
2.78 cm
4.29 cm
"
2 3/8
6.03 cm
6.50 cm
5.87 cm
4.76 cm
3.49 cm
1
"
2.54 cm
Designed and shaped by:
and generate less waste.
"
"
"
"
6 3/4
17.15 cm
Eric Arakawa
61
6’8X"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
“X” model
max. thickness 3-1/4”
ROCKER
5 3/8 "
13.65 cm
3 5/16"
8.41 cm
1 7/8 "
4.76 cm
1
"
2.54 cm
1
/2
"
1.27 cm
WIDTH
THICKNESS
4"
1 1/4 "
1 5/8 "
6"
2 3/16"
12 "
2 9/16"
18 "
"
24 "
5.56 cm
6.51 cm
7/
8
7.30 cm
2
(205.74 cm)
Tip-to-tip Deck Length: 6' 8"
(203.20 cm)
Maximum Width: 21 7/16"
(54.45 cm)
10.16 cm
3.18 cm
4.13 cm
Overall Bottom Length: 6' 9"
10 5/8 "
Maximum Thickness: 3 1/4"
(8.57 cm)
26.99 cm
14 9/16"
Displacement: Forthcoming
36.99 cm
17 3/8"
Introduced: April 2007
44.13 cm
19 3/8"
Rockers: Natural
49.21 cm
Available Densities: 1.7 PCF and 2.0 PCF
/16"
1
0.16 cm
36 "
"
Center
21 /16
54.45 cm
accommodate a wide range of board styles from
"
36 "
21 5/16
54.13 cm
"
Fishes to Big Guy short boards. The manufactur-
8.10 cm
3 1/4
8.26 cm
"
1
/32
0.08 cm
Shaper's Comments: “ Maximum Volume
3 3/16"
3 3/16
8.10 cm
21 1/4"
53.98 cm
7
"
Version” - Designed for maximum versatility to
ing process ensures uniform density and fusion
throughout, thus allowing the shaper to use the
maximum width of the blank if necessary. The
"
3
/8
0.95 cm
"
2 7/8
7.30 cm
18 "
17 3/16
43.66 cm
"
12 "
15 5/8
39.69 cm
"
6"
12 1/4
31.12 cm
"
2 5/8
6.67 cm
1 3/32"
2 1/4
5.72 cm
1 11/16"
1 13/16
4.60 cm
"
1 3/8
3.49 cm
4.29 cm
2 3/8
6.03 cm
"
19 5/8
49.85 cm
"
3
/4
1.91 cm
2.78 cm
24 "
"
Designed and shaped by:
nose and tail have added volume to yield most
types of rockers. A real workhorse blank.
"
"
"
"
6 3/4
17.15 cm
Eric Arakawa
62
7'2"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
max. thickness 2-15/16”
ROCKER
5 /16"
13
WIDTH
THICKNESS
1"
2
3/4
9
5/8
Overall Bottom Length: 7' 2 3/4"
(220.35 cm)
Tip-to-tip Deck Length: 7' 1 3/4"
(217.81 cm)
"
14.76 cm
2.54 cm
"
1 5/16
3.33 cm
2 /16"
1 7/8
4.76 cm
"
12 "
13 3/4
34.93 cm
"
2 1/4 "
18 "
16 3/4"
6.99 cm
Maximum Width: 21 9/16"
1
3 /2
8.89 cm
"
6"
(54.77 cm)
"
24.45 cm
Maximum Thickness: 2 15/16” (7.46 cm)
1
5.24 cm
"
Displacement: Forthcoming
1 1/8
2.86 cm
5.72 cm
42.55 cm
Introduced: October 2008
/16"
9
1.43 cm
2 9/16"
6.51 cm
24 "
18 13/16"
47.78 cm
Rockers: Natural
/16"
1
0.16 cm
2 7/8 "
7.30 cm
Available Densities: 1.7 PCF and 2.0 PCF
36 "
21 1/8"
53.66 cm
Shaper's Comments: Designed for high per2 /16"
15
Center
7.46 cm
21
"
9/16
54.77 cm
formance semi-guns. The added volume in the
nose and tail will accommodate a wide variety
"
2 7/8
7.30 cm
"
36 "
21 1/4
53.98 cm
1
/2
1.27 cm
"
2 9/16
6.51 cm
"
24 "
19 1/4
48.90 cm
13
/16
2.06 cm
"
2 3/16
5.56 cm
"
18 "
17 5/8
44.77 cm
"
2 1/8
5.40 cm
"
12 "
14 13/16
37.62 cm
"
1 9/16"
6"
11 5/16
28.73 cm
"
1 1/8
2.86 cm
1
/16
0.16 cm
1 1/4
3.18 cm
15
/16
4.92 cm
1
2 7/8
7.30 cm
3.97 cm
"
Designed and shaped by:
"
of rockers.
"
"
"
"
5
"
12.7 cm
Eric Arakawa
63
7’2X"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
“X” model
max. thickness 3-5/16”
ROCKER
5 /16"
13
14.76 cm
THICKNESS
WIDTH
"
1
3/8
1
11/16
2
1/4
2
3/4
9
5/8
13
3/4
Overall Bottom Length: 7' 2 3/4"
(220.35 cm)
Tip-to-tip Deck Length: 7' 1 3/4"
(217.81 cm)
"
6.99 cm
3.49 cm
Maximum Width: 21 9/16"
"
1
3 /2
8.89 cm
"
6"
"
12 "
2 5/8 "
18 "
2 15/16"
24 "
4.29 cm
(54.77 cm)
"
24.45 cm
Maximum Thickness: 3 5/16"
2 /16"
1
5.24 cm
5.72 cm
(8.41 cm)
"
34.93 cm
Displacement: Forthcoming
"
1 1/8
2.86 cm
6.67 cm
16 3/4"
42.55 cm
Introduced: June 2007
/16"
9
1.43 cm
7.46 cm
18 13/16"
47.78 cm
Rockers: Natural
Available Densities: 1.7 PCF and 2.0 PCF
/16"
1
0.16 cm
3 1/4 "
8.26 cm
36 "
21 1/8"
53.66 cm
Shaper's Comments: “Maximum Volume Ver3
"
5/16
Center
8.41 cm
21
"
9/16
54.77 cm
sion” - Designed for high performance semi-guns.
The added volume in the nose and tail will accom-
"
3 1/4 "
36 "
21 1/4
53.98 cm
1
/2
1.27 cm
"
2 13/16
7.14 cm
"
24 "
19 1/4
48.90 cm
13
/16
2.06 cm
"
2 9/16
6.51 cm
"
18 "
17 5/8
44.77 cm
"
2 1/2
6.35 cm
"
12 "
14 13/16
37.62 cm
"
1 15/16"
6"
11 5/16
28.73 cm
"
1 1/2
3.81 cm
1
/16
0.16 cm
1 1/4
3.18 cm
15
/16
4.92 cm
1
2 7/8
7.30 cm
8.26 cm
4.92 cm
"
Designed and shaped by:
"
modate a wide variety of rockers.
"
"
"
"
5
"
12.7 cm
Eric Arakawa
64
7'8"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
5 9/16
14.13 cm
3 11/16
9.37 cm
"
2 3/16"
5.57 cm
"
1 1/4
3.18 cm
"
11
/16
1.75 cm
THICKNESS
WIDTH
1 1/16
2.70 cm
10.16 cm
"
4
"
6"
1 1/2
3.81 cm
"
12 "
2 1/16
5.24 cm
"
2 7 /16
6.19 cm
2
13 /16
7.14 cm
"
18 "
24 "
Overall Bottom Length: 7' 9 "
(236.22 cm)
"
Tip-to-tip Deck Length: 7' 7 7/8"
(233.36 cm)
"
11 1/16
28.10 cm
Maximum Width: 23 1/4"
(59.06 cm)
"
15 3/8
39.05 cm
Maximum Thickness: 3 1/4"
(8.26 cm)
"
18 3/8
46.67 cm
Displacement: Forthcoming
"
20 7/16
51.91 cm
Introduced: March 2009
Rockers: Natural
"
1
/8
0.32 cm
3 3/16
8.10 cm
3 1/4
"
"
36 "
Center
22 11/16
57.63 cm
"
23 1/4 "
59.06 cm
8.26 cm
Available Densities: 1.7 PCF and 2.0 PCF
Shaper's Comments: This is a multi-purpose
blank which can be used for Fun Boards, Big Guy
boards and Guns. The extra volume will accommodate a wide variety or rocker configurations.
1
"
/8
0.32 cm
36 "
22 /4
57.79 cm
2 3/4
6.99 cm
"
24 "
20 5/8
52.39 cm
"
2 1/2
"
18 "
18 5/8
47.31 cm
"
2 3/16
5.56 cm
"
12 "
"
1 3/4
4.45 cm
"
6"
"
1 3 /8
3.49 cm
13
/16
2.06 cm
3.18 cm
1 7/8
4.76 cm
9
/16
6.51 cm
2
"
"
7.94 cm
3
"
1
/2
1.27 cm
1 1/4
3
1/8
6.35 cm
"
Designed and shaped by:
"
"
16
"
40.64 cm
"
12 1/4
31.12 cm
"
5 1/4
13.34 cm
Eric Arakawa
65
7’8X"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
9
5 /16
14.13 cm
11
3 /16
9.37 cm
"
2 3/16"
5.57 cm
“X” model
WIDTH
THICKNESS
4
"
1 7/16
3.65 cm
"
1 7/8
4.76 cm
Tip-to-tip Deck Length: 7' 7 7/8"
"
12 "
"
(59.06 cm)
"
15 3/8
39.05 cm
Maximum Thickness: 3 5/8"
"
1
"
2 13/16
7.14 cm
11
"
3
1 /4
3.18 cm
18 "
(233.36 cm)
11 1/16
28.10 cm
Maximum Width: 23 1/4"
2 7/16
6.19 cm
(236.22 cm)
"
10.16 cm
6"
Overall Bottom Length: 7' 9 "
(9.21 cm)
"
18 3/8
46.67 cm
Displacement: Forthcoming
/16
1.75 cm
"
3 /16
8.10 cm
24 "
"
20 7/16
51.91 cm
Introduced: June 2007
Rockers: Natural
1
"
/8
0.32 cm
9
"
3 /16
9.05 cm
36 "
22 11/16
57.63 cm
"
Available Densities: 1.7 PCF and 2.0 PCF
3 5/8 "
Center
9.21 cm
"
23 1/4
59.06 cm
Shaper's Comments: “Maximum Volume Version” - This is a multi-purpose blank which can be
used for Fun Boards, Big Guy boards and Guns.
The extra volume will accommodate a wide variety
/8
0.32 cm
"
3 /2
8.89 cm
"
36 "
22 /4
57.79 cm
"
3 1/8
7.94 cm
"
24 "
20 5/8
52.39 cm
13
/16
2.06 cm
"
2 7/8 "
18 "
18 5/8
47.31 cm
"
2 9/16
6.51 cm
"
12 "
"
2 1/8
5.40 cm
"
6"
"
1 3/4
4.45 cm
1
1
/2
1.27 cm
1 1/4
3.18 cm
1 7/8
4.76 cm
9
/16
6.51 cm
2
1
7.30 cm
"
Designed and shaped by:
3
"
or rocker configurations.
"
"
16
"
40.64 cm
"
12 1/4
31.12 cm
"
5 1/4
13.34 cm
Eric Arakawa
66
8'8"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
Overall Bottom Length: 8' 7 7/8"
Tip-to-tip Deck Length: 8' 7"
Maximum Width: 25 1/4"
(263.84 cm)
(261.62 cm)
(64.14 cm)
Maximum Thickness: 3 3/16" (8.10 cm)
ROCKER
4 1/4
"
10.80 cm
3 3/16"
THICKNESS
WIDTH
"
1 1/4
3.18 cm
"
1 3/ 4
6 3/4
17.15 cm
6"
8.10 cm
4.45 cm
2 3/16"
2 1/ 4
5.72 cm
"
"
2
5/8
"
18 "
2
7/8
"
24 "
5.56 cm
1
1 /2
3.81 cm
15
/16"
2.38 cm
6.67 cm
7.30 cm
"
12 "
1713/16 "
45.24 cm
"
211/16
53.50 cm
22
3/4
"
57.79 cm
23 3/4 "
60.33 cm
Displacement: Forthcoming
Introduced: March 2009
Rockers: Natural
Available Densities: 1.7 PCF and 2.0 PCF
Shaper's Comments:
This blank is a scaled
down version of the 9’8 EPS. The goal was to
design an EPS mold plug that would accomodate
any longboard shape program in the 7’10” to
8’6” range for machine cutting purposes. After
analyzing all the rocker templates from the Clark
"
1
/4
0.64 cm
"
3 1/8
7.94 cm
36 "
25
"
63.50 cm
Foam data base we came up with a “middle of
the road” rocker profile, and added thickness to
the nose and tail to allow for straight to extreme
3 3/16"
48 "
3 3/16"
Center
8.10 cm
3/16
3
"
48 "
"
rocker profiles. The plan shape and width have
"
also been maximized. This blank will be offered
"
in 2 different thicknesses to accomodate for both
251/4
64.14 cm
253/16
63.98 cm
25 1/8
63.82 cm
machine shaping and hand shaping.
"
3 1/8
7.94 cm
"
36 "
245/16
61.75 cm
"
2 7/8
7.30 cm
"
24 "
223/8
56.83 cm
"
2 5/8
6.67 cm
"
18 "
203/4
52.71 cm
1 5/16
3.33 cm
"
2 5/16
5.87 cm
"
12 "
181/2
46.99 cm
1 15/16"
1 7/8
4.76 cm
"
6"
151/4
38.74 cm
"
1 3/8
3.43 cm
"
1
/8
0.32 cm
1
/2
1.27 cm
13
/16
2.06 cm
4.92 cm
2 1/8
5.40 cm
Designed and shaped by:
"
"
"
"
"
"
9 1/2
24.13 cm
Rennie Yater
67
9'8"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
Max. thickness 3”
ROCKER
4 9/16"
11.59 cm
THICKNESS
"
1
8.73 cm
4.29 cm
2 9/16"
2 1/16"
6.51 cm
13
"
/16
4.60 cm
1
"
1 3/16
3.02 cm
7 1/2 "
19.05 cm
3.49 cm
3 /16"
7
WIDTH
"
1 3/8
11/16
5.24 cm
2 3/8
6"
17 3/8
44.13 cm
12 "
20 3/4 "
"
18 "
"
24 "
6.03 cm
2 5/8
6.67 cm
Overall Bottom Length: 9' 8"
"
52.71 cm
22 1/2 "
57.15 cm
"
23 1/2
59.69 cm
Tip-to-tip Deck Length: 9' 7 1/4"
(274.32 cm)
(274.96 cm)
Maximum Width: 25 1/4"
(64.14 cm)
Maximum Thickness: 3"
(7.62 cm)
Displacement: Forthcoming
Introduced: December 2007
Rockers: Natural
Available Densities: 2.0 PCF
Shaper's Comments:
“Minimum Volume
Version” - This blank is the result of input by
several people within the surfboard manufacturing
1
/2
"
1.27 cm
2 13/16"
7.14 cm
36 "
24 3/4 "
62.87 cm
industry. The goal was to design an EPS mold plug
that would accomodate any longboard shape program in the 8’10” to 9’6” range for machine cutting
"
1
/16
0.16 cm
3"
7.62 cm
3"
7.62 cm
48 "
Center
"
25 1/4
64.14 cm
25 1/8 "
63.82 cm
purposes. After analyzing all the rocker templates
from the Clark Foam data base we came up with
a “middle of the road” rocker profile, and added
thickness to the nose and tail to allow for straight
to extreme rocker profiles. The plan shape and
"
3
/32
0.24 cm
3"
7.62 cm
48 "
"
24 7/8
63.18 cm
width have also been maximized. This blank is
offered in 3 different thicknesses to accomodate
for both machine shaping and hand shaping.
"
7
/16
1.11 cm
"
1 1/16
2.70 cm
2 1/4
2 9/16"
24 "
21 7/8
55.56 cm
20 3/16"
6.51 cm
"
18 "
"
2 1/16"
12 "
"
1 3/4
4.45 cm
"
1 1/4
3.18 cm
7.62 cm
4
23 7/8
60.65 cm
2 3/8
6.03 cm
5.72 cm
3
36 "
7.14 cm
"
1 9/16
3.97 cm
10.16 cm
"
2 13/16"
5.24 cm
"
"
Designed and shaped by:
6"
"
51.28 cm
18
"
45.72 cm
14 13/16"
37.62 cm
"
9 1/2
24.13 cm
Rennie Yater
68
9’8X"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
“X” model
Max. thickness 3-3/8”
ROCKER
4 9/16"
11.59 cm
THICKNESS
1 3/4
6"
17 3/8
44.13 cm
2 7/16"
12 "
20 3/4 "
3/4
"
18 "
3
"
24 "
2
8.73 cm
5.24 cm
2 9/16"
6.51 cm
13
"
/16
4.60 cm
1
"
1 3/16
3.02 cm
19.05 cm
4.46 cm
"
WIDTH
7 1/2 "
"
3 /16"
7
Overall Bottom Length: 9' 8"
1/16
6.19 cm
2
6.99 cm
7.62 cm
"
52.71 cm
22
/2 "
1
57.15 cm
"
23 1/2
59.69 cm
(274.32 cm)
Tip-to-tip Deck Length: 9' 7 1/4"
Maximum Width: 25 1/4"
(274.96 cm)
(64.14 cm)
Maximum Thickness: 3 3/8"
(8.57 cm)
Displacement: Forthcoming
Introduced: December 2007
Rockers: Natural
Available Densities: 2.0 PCF
Shaper's Comments:
“Medium Volume
Version” - This blank is the result of input by
several people within the surfboard manufacturing
1
/2
"
1.27 cm
3 3/16"
8.10 cm
36 "
24 3/4 "
62.87 cm
industry. The goal was to design an EPS mold plug
that would accomodate any longboard shape program in the 8’10” to 9’6” range for machine cutting
/16"
1
0.16 cm
3 3/8 "
8.57 cm
3 3/8 "
48 "
Center
8.57 cm
"
25 1/4
64.14 cm
25 1/8 "
63.82 cm
purposes. After analyzing all the rocker templates
from the Clark Foam data base we came up with
a “middle of the road” rocker profile, and added
thickness to the nose and tail to allow for straight
to extreme rocker profiles. The plan shape and
"
3
/32
0.24 cm
3 3/8
"
8.57 cm
48 "
"
24 7/8
63.18 cm
width have also been maximized. This blank is
offered in 3 different thicknesses to accomodate
for both machine shaping and hand shaping.
"
7
/16
1.11 cm
"
1 1/16
2.70 cm
3 3/16"
24 "
21 7/8
55.56 cm
20 3/16"
7.46 cm
"
18 "
"
2 7/16"
12 "
"
2 1/8
5.40 cm
"
1 5/8
4.13 cm
7.62 cm
4
23 7/8
60.65 cm
2 3/4
6.99 cm
5.72 cm
3
36 "
8.10 cm
"
1 9/16
3.97 cm
2 1/4
3 3/16"
10.16 cm
6.19 cm
"
"
Designed and shaped by:
6"
"
"
51.28 cm
18
"
45.72 cm
14 13/16"
37.62 cm
"
9 1/2
24.13 cm
Rennie Yater
69
9’8X2"EPS
SUPERFUSED
Call (310) 225-6774 or visit www.usblanks.com
“X2” model
Max. thickness 3-3/4”
ROCKER
4 9/16"
11.59 cm
THICKNESS
WIDTH
7 1/2 "
2 1/8 "
19.05 cm
5.40 cm
"
Overall Bottom Length: 9' 8"
3 /16"
2 /16
6.19 cm
6"
8.73 cm
17 3/8
44.13 cm
2 9/16"
2 13/16"
12 "
20 3/4 "
"
3 1/8
7.94 cm
"
18 "
"
3 3/8"
24 "
7
6.51 cm
13
/16
4.60 cm
1
1 3/16
3.02 cm
7
7.14 cm
8.57 cm
"
52.71 cm
22 1/2 "
57.15 cm
"
23 1/2
59.69 cm
(274.32 cm)
Tip-to-tip Deck Length: 9' 7 1/4"
Maximum Width: 25 1/4"
(274.96 cm)
(64.14 cm)
Maximum Thickness: 3 3/4"
(9.53 cm)
Displacement: Forthcoming
Introduced: December 2007
Rockers: Natural
Available Densities: 2.0 PCF
Shaper's Comments:
“Maximum Volume
Version” - This blank is the result of input by
several people within the surfboard manufacturing
1
/2
"
1.27 cm
3 9/16"
9.05 cm
36 "
24 3/4 "
62.87 cm
industry. The goal was to design an EPS mold plug
that would accomodate any longboard shape program in the 8’10” to 9’6” range for machine cutting
"
1
/16
0.16 cm
3 3/4"
9.53 cm
3 3/4 "
9.53 cm
48 "
Center
"
25 1/4
64.14 cm
25 1/8 "
63.82 cm
purposes. After analyzing all the rocker templates
from the Clark Foam data base we came up with
a “middle of the road” rocker profile, and added
thickness to the nose and tail to allow for straight
to extreme rocker profiles. The plan shape and
"
3
/32
0.24 cm
3 3/4 "
9.53 cm
48 "
"
24 7/8
63.18 cm
width have also been maximized. This blank is
offered in 3 different thicknesses to accomodate
for both machine shaping and hand shaping.
"
7
/16
1.11 cm
3 9/16"
36 "
23 7/8
60.65 cm
1 1/16
2.70 cm
3 5/16"
24 "
21 7/8
55.56 cm
1 9/16"
3 1/8
7.94 cm
"
18 "
20 3/16"
"
2 13/16"
12 "
"
2 1/2"
"
3.97 cm
2 1/4
5.72 cm
3
7.62 cm
4
"
10.16 cm
9.05 cm
8.41 cm
7.14 cm
6.35 cm
2
5.08 cm
"
Designed and shaped by:
6"
"
"
51.28 cm
18
"
45.72 cm
14 13/16"
37.62 cm
"
9 1/2
24.13 cm
Rennie Yater
70
EPS BLOCK
CUT BLANKS
Manufactured from White Hot Surfboard Foam Billets
Available in 1.5 lb. or 2.0 lb. Density
Size
Type-Shaper Standard Length Width
Stringer Nose Tail Center Nose Tail
Rocker Rocker Thick. Thick. Thick.
6’0”P Short Board - Patterson
Ply
73.00 20.06
4.63 1.69 2.38
0.88
1.06
6’2”A Fish - Rawson
Ply
74.25 23.50
4.75 1.81 3.15
1.35
1.45
6’3”RS Short Board - Rusty
Ply
75.00 21.00
4.87 2.00 2.62
1.25
1.37
63RSX Short Board - Rusty
Ply
75.00 21.00
4.87 2.00 2.90
1.50
1.65
6’3”WH Short Board - Rusty
Ply
75.75 20.60
5.60 1.73 2.75
1.40
1.50
6’3”WHX Short Board - Rusty
Ply
75.75 20.60
5.60 1.73 3.15
1.75
1.87
6’5”A Fish - Rawson
Ply
77.25 23.50
5.25 1.81 3.35
1.13
1.38
6’8”WH Short Board - Rusty
Ply
79.00 21.75
5.25 2.34 2.88
1.15
1.25
6’8”WHX Short Board - Rusty
Ply
79.00 21.75
5.25 2.34 3.50
1.75
1.85
6’9”RS Short Board - Rusty
Ply
81.00 22.00
5.81 2.40 2.87
1.75
1.25
69RSX Short Board - Rusty
Ply
81.00 22.00
5.81 2.40 3.18
1.50
1.50
6’10”A Fish - Rawson
Ply
81.67 24.13
5.19 2.00 3.50
1.38
1.65
7’3”A Fish - Rawson
1/8” Bass 87.04 24.11
5.50 2.13 3.63
1.38
1.50
7’5”A Short Board - Rawson 1/8” Bass 87.96 22.06
6.13 2.19 3.00
0.88
1.38
8’1”EA Short Board - Arakawa 1/8” Bass 96.05 24.14
6.44 2.57 3.44
1.00
1.32
9’2”A Gun - Rawson
1/8” Bass 110.40 22.46
7.57 2.75 3.57
1.39
1.28
9’3”Y Long Board - Yater 1/8” Bass 111.30 24.50
4.38 3.50 3.25
1.73
1.41
9’4”B Long Board - Jones 1/8” Bass 111.44 24.50
4.88 3.63 3.25
0.90
1.32
9’8”Y Long Board - Yater 1/8” Bass 116.40 24.50
4.50 3.69 3.63
1.45
1.55
9’9”A Gun - Rawson
1/8” Bass 116.90 22.50
7.75 3.25 3.69
1.38
1.44
10’2”B Long Board - Jones 1/8” Bass 122.22 24.50
4.82 3.82 3.73
1.27
1.58
9’6”A SUP
1/8” Bass 114.00 32.00
5.25 4.25 4.93
2.25
1.25
10’0” SUP
1/8” Bass 120.00 32.00
5.50 4.31 4.93
2.25
1.31
10’4”A SUP
1/8” Bass 124.00 32.00
4.56 3.75 4.88
2.06
1.81
10’4”B SUP
1/8” Bass 124.00 32.00
6.25 4.38 4.81
2.31
1.69
11’2”A SUP
1/8” Bass 134.00 32.00
5.25 4.19 5.00
1.86
1.86
11’2”B SUP
1/8” Bass 134.00 32.00
6.75 4.75 5.06
2.50
1.81
12’1” SUP
1/8” Bass 145.00 32.00
6.13 3.38 5.19
2.56
2.50
12’6”A SUP
1/8” Bass 150.00 32.00
6.31 3.50 5.50
2.86
2.75
310-225-6774 OR
www.usblanks.com
71
9'6"EPS
SUP
Call (310) 225-6774 or visit www.usblanks.com
Overall Bottom Length: 9' 6 5/8" (291.15 cm)
WIDTH
THICKNESS
5 1/4
"
13.35 cm
"
2 1/4
32 "
5.72 cm
Tip-to-tip Deck Length: 9' 6" (289.56 cm)
81.28cm
Maximum Width: 32"
"
3 1/2
"
12 "
1 1/16"
4 1/4
"
24 "
2 5/16
5.87 cm
2.70 cm
8.89 cm
10.80 cm
(81.28 cm)
Maximum Thickness: 4 15/16"
(12.54 cm)
Available Density: 1.5 PCF or 2.0 PCF
Introduced: January 2011
"
3
/8
0.95 cm
"
36 "
"
48 "
4 11/16
11.91 cm
4
7/8
12.38 cm
"
4 15/16
12.54 cm
Center
4 7/ 8
12.38 cm
"
48 "
1
/16
0.16 cm
"
4 5/8
11.75 cm
"
36 "
1 1/16"
4 1/16
10.32 cm
"
24 "
2 1 /16"
3 1/8
7.94 cm
"
12 "
"
1 1/4
3.18 cm
2.70 cm
5.24 cm
4 1/4
10.80 cm
"
Rockers: Natural
Notes: Forthcoming
32 "
81.28 cm
32 "
81.28 cm
72
10'0"EPS
SUP
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
5 1/2
13.97 cm
2 5/8
6.67 cm
"
THICKNESS
WIDTH
"
2 1/4
32 "
5.72 cm
81.28 cm
3 7/16"
8.73 cm
Overall Bottom Length: 10' 0 3/4" (306.71 cm)
12 "
Tip-to-tip Deck Length: 10' 0" (304.8 cm)
Maximum Width: 32"
(81.28 cm)
Maximum Thickness: 4 15/16"
1 1/4
"
3.18 cm
"
1
/2
1.27 cm
4 3/16
10.64 cm
24 "
"
36 "
"
(12.54 cm)
Available Density: 1.5 PCF or 2.0 PCF
4 5/8
11.75 cm
Introduced: January 2011
Rockers: Natural
"
1
/8
0.32 cm
"
4 13/16
12.22 cm
48 "
Notes: Forthcoming
"
Center
4 15/16
12.54 cm
"
4 3/ 4
12.07 cm
"
48 "
5
/8
1.59 cm
"
4 7/16
11.27 cm
"
36 "
1 7/16"
3 13/16
9.68 cm
"
24 "
2 9 /16"
2 7/8
7.30 cm
"
12 "
4 5/16"
1 5/16
3.33 cm
1
/8
0.32 cm
3.65 cm
6.51 cm
10.95 cm
"
32 "
81.28 cm
32 "
81.28 cm
73
10'4"EPS
A-SUP
Call (310) 225-6774 or visit www.usblanks.com
THICKNESS
9
"
4 /16
11.59 cm
WIDTH
"
32 "
2 1/16
5.24 cm
81.28 cm
Overall Bottom Length: 10' 5 1/4" (318.14 cm)
Tip-to-tip Deck Length: 10' 4" (314.96 cm)
2 1/8
5.40 cm
"
"
3 3/8
8.57 cm
12 "
Maximum Width: 32"
"
15
/16
2.38 cm
"
24 "
4 1/8
10.48 cm
(81.28 cm)
Maximum Thickness: 4 7/8"
(12.38 cm)
Available Density: 1.5 PCF or 2.0 PCF
"
5
/16
0.79 cm
"
4 9/16
11.59 cm
36 "
Introduced: August 2009
"
4 3/4
12.07 cm
48 "
Rockers: Natural
Notes: Forthcoming
"
4 7/8
12.38 cm
Center
"
4 5/ 8
11.75 cm
"
48 "
"
4 3/8
11.11 cm
"
36 "
"
3 15/16
10.00 cm
"
24 "
2 3 /16"
3 1/4
8.26 cm
"
12 "
"
1 13/16
4.60 cm
1
/4
0.64 cm
5
/8
1.59 cm
1 1/4
3.18 cm
5.56 cm
3 3/4
9.53 cm
"
32 "
81.28 cm
32 "
81.28 cm
74
10'4"EPS
B-SUP
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
1
"
6 /4
15.88 cm
THICKNESS
2
5/16
WIDTH
"
32 "
5.87 cm
81.28 cm
Overall Bottom Length: 10' 5 1/4" (318.14 cm)
Tip-to-tip Deck Length: 10' 4" (314.96 cm)
3 1/16
7.78 cm
"
"
3 5/16
8.41 cm
12 "
Maximum Width: 32"
1 1/2
"
3.81 cm
3 15/16
10.00 cm
"
24 "
(81.28 cm)
Maximum Thickness: 4 13/16"
(12.22 cm)
Available Density: 1.5 PCF or 2.0 PCF
"
"
5
/8
1.59 cm
4 7/16
11.27 cm
"
4 11/16
11.91 cm
3
/16
0.48 cm
36 "
Introduced: August 2009
"
48 "
Rockers: Natural
Notes: Forthcoming
"
4 13/16
12.22 cm
4 3/4
12.07 cm
"
48 "
"
4 1/2
11.43 cm
"
36 "
"
3 15/16
10.00 cm
"
24 "
"
12 "
11
/16
1.75 cm
3.81 cm
2 11/16"
6.83 cm
4 3/8
"
11.11 cm
3 1/8
7.94 cm
"
11/
16
4.29 cm
1
32 "
81.28 cm
"
3
/16
0.48 cm
1 1/2
Center
32 "
81.28 cm
75
11'2"EPS
A-SUP
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
5 1/4
13.34cm
THICKNESS
WIDTH
"
32 "
1 7/8
4.76 cm
81.28 cm
Overall Bottom Length: 11' 3 1/2" (344.17 cm)
Tip-to-tip Deck Length: 11' 2" (340.36 cm)
1
"
2 /2
6.35 cm
3
3/8
"
8.57 cm
12 "
Maximum Width: 32"
1 1/4
"
3.18 cm
4 3/16"
10.64 cm
24 "
(81.28 cm)
Maximum Thickness: 5"
(12.7 cm)
Available Densities: 1.5 PCF or 2.0 PCF
9
"
/16
1.43 cm
4
5/8
"
11.75 cm
36 "
Introduced: August 2009
"
1
/8
0.32 cm
"
4 7/8
12.38 cm
48 "
Rockers: Natural
Notes: Forthcoming
5"
Center
12.70 cm
"
4 13/16
12.22 cm
"
48 "
"
4 9/16
11.59 cm
"
36 "
"
4 1/8
10.48 cm
"
24 "
"
3 3/8
"
12 "
1
/4
0.64 cm
5
/8
1.59 cm
1 1/4
3.18 cm
2 1/4
5.72 cm
8.57 cm
4 3/16"
1 7/8 "
10.64 cm
4.76 cm
32 "
81.28 cm
32 "
81.28 cm
76
11'2"EPS
B-SUP
Call (310) 225-6774 or visit www.usblanks.com
ROCKER
"
3
THICKNESS
WIDTH
"
6 /4
17.15 cm
2
1/2
6.35 cm
"
3
7/16
32 "
81.28 cm
Overall Bottom Length: 11' 3 1/2" (344.17 cm)
Tip-to-tip Deck Length: 11' 2" (340.36 cm)
7
3 /16
8.73 cm
"
8.73 cm
12 "
Maximum Width: 32"
1 7/8
"
4.76 cm
"
4 1/8
10.48 cm
24 "
(81.28 cm)
Maximum Thickness: 5 1/16"
(12.86 cm)
Available Densities: 1.5 PCF or 2.0 PCF
7
"
/8
2.22 cm
4
9/16
"
11.59 cm
36 "
Introduced: August 2009
"
5
/16
0.79 cm
"
4 7/8
12.38 cm
48 "
Rockers: Natural
Notes: Forthcoming
"
5 1/16
12.86 cm
"
4 15/16
12.54 cm
"
48 "
"
4 9/16
11.59 cm
"
36 "
"
4 1/16
10.32 cm
"
24 "
"
12 "
5
/16
0.79 cm
7
/8
2.22 cm
1 3/4
4.45 cm
3"
6.83 cm
4 3/4
Center
"
12.07 cm
3 1/4
8.26 cm
1 13/16"
4.60 cm
32 "
81.28 cm
32 "
81.28 cm
77
"
6 1/8
15.56 cm
"
3
3 /16
7.94 cm
32 "
"
2 9/16
6.51 cm
3
5/8
9.21cm
"
81.28 cm
12'1"EPS
SUP
Overall Bottom Length: 12' 2 1/8" (371.16 cm)
12 "
Tip-to-tip Deck Length: 12' 1" (368.3 cm)
1 3/4 "
4.29 cm
7
/8
"
2.22 cm
4 5/16 "
10.95 cm
4
3/4
"
12.07 cm
24 "
Maximum Width: 32"
(81.28 cm)
Maximum Thickness: 5 3/16"
(13.18 cm)
36 "
Available Densities: 1.5 PCF or 2.0 PCF
"
5
/16
0.79 cm
5"
48 "
12.70 cm
Introduced: August 2009
Rockers: Natural
Notes: Forthcoming
"
5 3/16
13.18 cm
"
1
/4
0.64 cm
5"
"
36 "
4 5/16
10.95 cm
"
24 "
"
12 "
"
4 3/4
12.07 cm
1 1/16"
1 7/8
"
3 5/8
"
2 1/2 "
4.76 cm
3 3/8
8.57 cm
32 "
81.28 cm
48 "
12.70 cm
9
/16
1.43 cm
2.70 cm
Center
9.21 cm
6.35 cm
32 "
81.28 cm
78
"
6 5/16
16.03 cm
2 7/8
7.30 cm
3 5/16"
3 15/16"
"
8.41 cm
32 "
81.28 cm
10.00cm
12'6"EPS
SUP
Overall Bottom Length: 12' 7 1/2" (384.81 cm)
12 "
Tip-to-tip Deck Length: 12' 6" (381.0 cm)
1 13/16"
4.60 cm
/16"
15
2.38 cm
4 5/8
"
11.75 cm
5 1/16"
12.86 cm
24 "
Maximum Width: 32"
(81.28 cm)
Maximum Thickness: 5 1/2"
36 "
(13.97 cm)
Available Density: 1.5 PCF or 2.0 PCF
"
3
/8
0.95 cm
"
5 3/8
13.65 cm
48 "
Introduced: January 2011
Rockers: Natural
Notes: Forthcoming
"
Center
5 1/2
13.97 cm
"
5 3/8
13.65 cm
"
48 "
5
/8
1.59 cm
"
5 1/16
12.86 cm
"
36 "
1 3/16"
"
4 5/8
11.75 cm
24 "
3.02 cm
2"
3 15/16"
12 "
5
/16
0.79 cm
5.08 cm
3 1/2
"
8.89 cm
10.00 cm
2 3/4 "
6.96cm
32 "
81.28 cm
32 "
81.28 cm
79
Parabolic Stringers
The parabolic template outlines depicted on the following pages are drawn to scale and are representative of the curvature positioning related to the given blank sizes. All templates are named based on their
overall length from end to end. When ordering please specify the specific template to be used based on
the finished board length. Any short board template can be used in any blank as long as the template is
smaller than the blank itself (this does not apply to fish templates). For example, you can request to use
the 6’0 parabolic template in the 6’6EA blank. As a general rule the maximum length template that can be
used in a blank will be one size smaller than the blank itself (eg. 6’0 template in the 6’2P or the 6’4 template in the 6’6EA, etc.) We will only use the same length template in a blank when specifically requested
by a customer. All templates can also be used in our Superfused EPS blanks.
Our “stock” parabolic templates can be adjusted in or out in the tail to accomodate a narrower or wider outline. Be aware that all dimensions from nose to tail will be affected when making this adjustment. Upon
request customers may also submit “custom” templates to be kept as private outlines. Custom template
set up will be subject to a one-time surcharge.
The most common stringer thicknesses in parabolic blanks are 3/32”, 1/8” and 4mm ply (5/32”). The allowed maximum stringer thickness used for the 5’11 Fish and 6’4 Fish outlines is 3/32”.
We suggest using the “natural” rocker in all parabolic blanks whenever possible. Parabolic stringers do
not react to (or hold) rocker adjustments in the same manner as when adjusted from a center stringer.
For this reason will not guarantee precise tolerances when making “custom rocker adjustments” in
parabolic blanks.
Parabolic Polyurethane blanks can also be ordered in colored foam. When ordering colored parabolic
blanks with different colored rails we require that you order a minimum of 2 blanks (one of each color) as
the colors will be exchanged between the 2 blanks.
80
Call (310) 225-6774 or visit www.usblanks.com
5'9"P
PARABOLIC
Overall Template Length: 5' 8" (172.72 cm)
Blank Width: 19 1/16"
(48.42 cm)
( 1/2" narrower than standard 5’9P)
Notes: This template is suitable for high performance shortboard shapes 5’8 and under.
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
9"
narrower due to the thickness of material removed
22.86 cm
during the cutting process.
Available Rockers:
13
1/4
"
5’9P Parabolic Natural Rocker - 5’8 template
33.66 cm
"
14 5/8
37.15 cm
5’8”
172.72 cm
"
14 1/4
36.20 cm
"
11 3/8
28.90 cm
4"
10.16 cm
310-225-6774 OR
www.usblanks.com
81
Call (310) 225-6774 or visit www.usblanks.com
6'0"P
PARABOLIC
Overall Template Length: 5' 10" (177.80 cm)
Blank Width: 19 9/16" (49.69 cm)
( 1/2" narrower than standard 6’0P )
Notes: This template is suitable for high performance short board shapes 5’10” and under.
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
"
for thickness of stringers. Overall blank width is
9 5/8
24.45 cm
narrower due to the thickness of material removed
during the cutting process.
Available Rockers:
14 1/2 "
36.83 cm
15 5/8 "
39.69 cm
6’0P Parabolic Natural Rocker - 5’10 template
5’10”
177.8 cm
15 3/8 "
39.05 cm
12 1/4 "
31.12 cm
"
4 1/4
10.80 cm
310-225-6774 OR
www.usblanks.com
82
Call (310) 225-6774 or visit www.usblanks.com
6'2"A
PARABOLIC
Overall Template Length: 5' 11" (180.34 cm)
Blank Width: 23 1/8" (58.74 cm)
( 1/2" narrower than standard 6’2A )
Notes: This template is suitable for high performance FISH board shapes 5’11” and under.
Maximum stringer thickess allowed = 3/32”
9 3/8"
23.81 cm
* * All parabolic dimensions are “inside widths”
13 3/8"
measured across from cut to cut. Extra width
33.97 cm
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
narrower due to the thickness of material removed
16 9/16"
during the cutting process.
42.07 cm
Available Rockers:
16 15/16"
43.02 cm
5’11”
180.34 cm
6’2A Parabolic Natural Rocker - 5’11 FISH template
15 3/4"
40.01 cm
12 9/16"
31.91 cm
"
9 13/16
24.92 cm
"
5 1/4
13.34 cm
310-225-6774 OR
www.usblanks.com
83
Call (310) 225-6774 or visit www.usblanks.com
6'2"P
PARABOLIC
Overall Template Length: 6' 0" (182.88 cm)
Blank Width: 20 1/8" (51.12 cm)
( 1/2" narrower than standard 6’2P )
Notes: This template is suitable for high performance short board shapes 6’0” and under.
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
9 3/4
must be added to the dimensions listed to account
"
for thickness of stringers. Overall blank width is
24.77 cm
narrower due to the thickness of material removed
during the cutting process.
"
14 3/8
Available Rockers:
36.51 cm
6’2P Parabolic Natural Rocker - 6’0 template
6’2P Parabolic +1/2”N18” Rocker - 6’0 template
15 7/8
"
40.32 cm
15 3/8
6’0”
6’2P Parabolic Natural Rocker - 5’10 template
182.88 cm
"
39.05 cm
12 1/4
"
31.12 cm
"
4 5/8
11.75cm
310-225-6774 OR
www.usblanks.com
84
Call (310) 225-6774 or visit www.usblanks.com
6'3"EA
PARABOLIC
Overall Template Length: 6' 2" (187.96 cm)
Blank Width: 20 5/16" (51.59 cm)
( 1/2" narrower than standard 6’3 EA )
Notes: This template is suitable for high performance short board shapes 6’2” and under.
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
"
must be added to the dimensions listed to account
9 3/8
23.81 cm
for thickness of stringers. Overall blank width is
narrower due to the thickness of material removed
during the cutting process.
13 7/8
"
35.24 cm
Available Rockers:
6’3EA Parabolic Natural Rocker - 6’2 template
6’3EA Parabolic Natural Rocker - 6’0 template
15 7/8
"
40.32cm
15 1/4
"
12 1/8
"
6’2”
6’3EA Parabolic Natural Rocker - 5’10 template
187.96 cm
38.74 cm
30.80 cm
4 9/16"
11.56 cm
310-225-6774 OR
www.usblanks.com
85
Call (310) 225-6774 or visit www.usblanks.com
6'5"A
PARABOLIC
Overall Template Length: 6' 4" (193.04 cm)
Blank Width: 23 1/8" (58.74 cm)
( 1/2" narrower than standard 6’5A )
Notes: This template is suitable for high performance FISH board shapes 6’4” and under.
8 1/16"
Maximum stringer thickness allowed = 3/32”
20.48 cm
12 "
30.48 cm
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
16"
40.64 cm
narrower due to the thickness of material removed
during the cutting process.
Available Rockers:
17 5/16"
43.97 cm
6’4”
193.04 cm
6’5A Parabolic Natural Rocker - 6’4 Fish template
16"
40.64 cm
12 3/4
"
32.39 cm
10 3/16"
25.88 cm
6 11/16"
16.99 cm
310-225-6774 OR
www.usblanks.com
86
Call (310) 225-6774 or visit www.usblanks.com
6'6"EA
PARABOLIC
Overall Template Length: 6' 4" (193.04 cm)
Blank Width: 20 15/16" (53.18 cm)
( 1/2" narrower than standard 6’6EA )
Notes: This template is suitable for high performance short board shapes 6’4” and under.
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
9"
22.86 cm
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
narrower due to the thickness of material removed
during the cutting process.
13 7/16"
34.13 cm
Available Rockers:
6’6EA Parabolic Natural Rocker - 6’4 template
6’6EA Parabolic Natural Rocker - 6’2 template
15 /16"
11
39.85 cm
6’4”
193.04 cm
6’6EA Parabolic Natural Rocker - 6’0 template
6’6EA Parabolic Natural Rocker - 5’10 template
15 "
38.10 cm
11 3/8
"
28.89 cm
"
4 3/8
11.11 cm
310-225-6774 OR
www.usblanks.com
87
Call (310) 225-6774 or visit www.usblanks.com
6'7"P
PARABOLIC
Overall Template Length: 6' 6" (198.12 cm)
Blank Width: 21" (53.34 cm)
( 1/2" narrower than standard 6’7P )
Notes: This template is suitable for high performance short board shapes 6’6” and under.
* * All parabolic dimensions are “inside widths”
3
"
8 /4
22.22 cm
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
narrower due to the thickness of material removed
13 /16"
5
during the cutting process.
33.81 cm
Available Rockers:
6’7P Parabolic Natural Rocker - 6’6 template
6’7P Parabolic +1/4”T20” Rocker - 6’4 template
15 /8 "
7
40.32 cm
6’6”
198.12 cm
15 3/16"
38.58 cm
12"
30.48 cm
4 1/8
"
10.48 cm
310-225-6774 OR
www.usblanks.com
88
Call (310) 225-6774 or visit www.usblanks.com
6'9"EA
PARABOLIC
Overall Template Length: 6' 8" (203.20 cm)
Blank Width: 20 13/16" (49.69 cm)
( 1/2" narrower than standard 6’9EA )
Notes: This template is suitable for high performance short board shapes 6’8” and under.
* * All parabolic dimensions are “inside widths”
"
8 15/16
22.70 cm
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
narrower due to the thickness of material removed
13 9/16"
34.45 cm
during the cutting process.
Available Rockers:
6’9EA Parabolic Natural Rocker - 6’8 template
16 1/8 "
40.96 cm
6’8”
6’9EA Parabolic Natural Rocker - 6’6 template
203.20 cm
14 13/16"
37.63 cm
10 15/16"
27.78 cm
3 1/4"
8.26 cm
310-225-6774 OR
www.usblanks.com
89
Call (310) 225-6774 or visit www.usblanks.com
7'1"EA
PARABOLIC
Overall Template Length: 7’ 0" (213.36 cm)
Blank Width: 22 3/16" (57.63 cm)
( 1/2" narrower than standard 7’1EA )
Notes: This template is suitable for high performance short board shapes 7’0” and under.
3
"
8 /4
22.23 cm
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
13 /2"
1
for thickness of stringers. Overall blank width is
34.29 cm
narrower due to the thickness of material removed
during the cutting process.
15 3/4 "
Available Rockers:
40.01 cm
7’1EA Parabolic Natural Rocker - 7’0 template
16 /16"
3
41.12 cm
7’0”
213.36 cm
16 3/16"
41.12 cm
14 3/4"
37.47 cm
11 1/4"
28.58 cm
4 3/4"
12.07 cm
310-225-6774 OR
www.usblanks.com
90
Call (310) 225-6774 or visit www.usblanks.com
9'4"B
PARABOLIC
Overall Template Length: 9' 4" (284.48 cm)
Outline “A”
6"
15.24 cm
Outline “B”
Blank Width: 24 11/16" (62.71 cm)
8"
( 1/2" narrower than standard 9’4B )
20.32 cm
Notes: This template is suitable for long board
"
14 1/4
36.20 cm
16 "
40.64 cm
shapes 9’4” and under.
This outline can be used on the following
blanks:
93Y, 94B, 95M, 98Y and 98EPS
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
for thickness of stringers. Overall blank width is
narrower due to the thickness of material removed
19"
48.26 cm
20 "
50.80 cm
during the cutting process.
Available Rockers:
94B Natural Rocker
11 1/4
28.58 cm
"
11 1/2
29.21 cm
4 1/2"
4 1/2"
11.43 cm
11.43 cm
310-225-6774 OR
"
www.usblanks.com
91
MULTI BOARD BOXES WITH BOX ENDS
INSIDE DIMENSIONS
BOX SIZE:
LENGTH
WIDTH
HEIGHT
1. 7’4”
7’2” (2.24 m)
25” (63.5 cm) 12” (30.5 cm)
2. 8'4"
8'2" (2.49 m)
25" (63.5 cm) 12" (30.5 cm)
3. 10'8"
10'6" (3.32 m) 26" (76.2 cm) 14" (35.5 cm)
4. 12'5"
12'3" (3.73 m) 33" (83.8 cm) 12.5" (31.6 cm)
BOXES ARE A GLUED TUBE MADE OF 275# KRAFT
ENDS STAPLE IN FOR A STRUCTUAL FIT.
BOXES ARE PLAIN WITH NO LOGO.
92