1. Your New Aquarium
People of all ages enjoy looking at aquariums. Aside from the belief that an aquarium
is beautiful, many also believe having an
aquarium can be relaxing, rewarding and a
great conversation piece all at the same
time. You will have many enjoyable hours
with your new aquarium and fish.
AQUARIUM
INSTRUCTIONS
FOR USE
2. Important Safety Instructions
3. Tank Placement


Place the aquarium on a level, strong
surface that is able to support the
weight of the assembled aquarium and
cannot be damaged by water.

The aquarium should be located near
an electrical outlet to provide power
for the light and filter. Use of a GFCI
rated outlet or circuit is recommended.

Never place an aquarium on top of a TV
or other electrical components.

Included in your new Aquarium Kit
1. 3 gallon tank
3. LED light
4. Undergravel filter
Make sure your tank has
not been damaged during
shipping before you start
the setup process.
5. Air pump
6. Airline tubing
4. Filter Set Up
Children under the age of 13 should be
supervised by an adult with the setup,
maintenance and fish care
Add a drip loop in
all electrical cords.
Use of a GFCI rated
outlet or circuit is
recommended.
2. Full hood
KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE
3 Gallon Aquarium Kit
AQ360-34c
Please read Safety Instructions section
before operating this unit. Completely
set up the 3 gallon aquarium kit before
plugging filter and light into electrical
outlet.
5. Adding Gravel
6. LED Light Set Up
6. Hood Functions

Assemble the Undergravel System
inserting the Riser Tube into the Xshaped plate.

Rinse materials in running water –
aquarium, gravel, stones, plastic plants
and other decorations, etc.

Connect one
end of the airline tubing to
the Air Pump,
connecting the
opposite end to
the airstone.

Place gravel, rocks and decorations in the
tank now, spreading the gravel evenly
across the bottom of the aquarium.

Slide the airstone to the bottom of the
Riser Tube.

Be sure to form a drip loop in the airline tubing to prevent back draining in
case of electrical loss.
Gravel and Decorations are not
included with this aquarium kit.

Place the Hood
on top of the
tank and make
sure it is fully
seated.

Insert LED light unit into back of hood,
turning to the right and tighten snuggly
to secure it. Insert power adaptor plug
into the LED light unit.

Plug power adaptor into standard 110
volt wall socket. Use of a GFCI (Ground
Fault Circuit Interrupter) is always
recommended when using electrical
appliances around water.
7. Filling Tank



Fill the aquarium with water to within
one inch of the top of the tank. Do not
overfill since spillage may occur.
Add a tap water conditioner such as
Stress Coat by API to remove chlorine
and other harmful chemicals found in
tap water.
8. Operating LED Light


You can turn on/off the LED light by
pushing the blue button switch on
top of the hood.
To select a specific light color,
continue to press the blue button
until desired color is located.
If you are adding fish right away, it is
recommended to use Quick Start by
API, immediately starts the natural
aquarium cycle allowing for instant
addition of fish.
9. Adding Optional Heater

Optional) If you are adding a heater
(heater not included) remove the section
shown below by using side cutting pliers
and cutting the attached webbing.

Read and follow the heater’s instructions.

Check with your retailer for recommended heater settings.

Adjust heater settings as directed.
KOLLERCRAFT
LIMITED WARRANTY
KOLLERCRAFT a Division of Koller Enterprises,
Inc. warrants this aquarium product to be free
from defects in material and workmanship under
normal use and service and according to the
provisions as specified in the accompanying assembly and operating instructions, for a period of
90 days from date of purchase.
This warranty does not cover and
KOLLERCRAFT is not liable for the cost of repair or replacement of parts which have been
subject to misuse, negligence, accident, improper installation, damage during shipment or handling,
normal deterioration due to wear and
exposure or defects caused by unauthorized
parts or modification.
UNDER NO CIRCUMSTANCES
WILL KOLLERCRAFT BE LIABLE
FOR ACCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LOSS OF
PROPERTY OR EQUIPMENT.
10. Adding Additional Accessories
11. Selecting Fish

Patience is important when establishing your
new aquarium. Begin by talking to an aquatic
professional at your local aquarium store
about which fish are best suited for your
aquarium and are compatible with each other, and how many would be appropriate for
your aquarium. Inform them that you have
just set up a new aquarium so they can recommend hardy fish. Be sure that the fish are
eating and acting normally. Check for ragged
fins that can be caused by harmful bacteria or
white spots caused by parasites. Always
choose healthy looking fish.
You can add additional accessories
by removing one of the two sections
shown below.
Use side-cut pliers to remove
cutouts by cutting attached
sections.
Do not add too many fish at once. Choose a
couple and then wait for two weeks before
adding more. Do not overcrowd.
12. Shopping List
API STRESS COAT®
Makes tap water safe
QUICK START®
Immediately starts the
natural aquarium cycle
allowing for instant
addition of fish
API STRESS ZYME®
Keeps the aquarium clean
API 5 in 1 AQUARIUM TEST
STRIPS
Measures water parameters
Some states do not allow the exclusion or limitation
of incidental or consequential damages, or limitation
on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you. This
warranty gives you the legal rights, which vary from
IF ANY COMPONENTS ARE
DAMAGED OR MISSING
DO NOT RETURN TO AMAZON
CALL (800)-545-1344
Warranty Repairs or Replacement
FOR HELP OR COMMENTS
GO TO [email protected] or
CALL (800) 545-1344
API® items and components are registered trademarks of Mars, Incorporated and its affiliates.
Manufactured and distributed under license by
KOLLER CRAFT Fenton, MO 63026 USA