TECHNICAL & SAFETY DATA SPECIFICATION : KL520
Product Name:
KL520 Anti-Corrosion Protective Wax (Aerosol ) 400 ml
AEROSOL CLASSIFICATION: PRODUCTS ARE HIGHLY FLAMMABLE - CAN UNDER PRESSURE KEEP IN WELL VENTILATED, DRY AREAS – STORE OUT OF DIRECT SUNLIGHT AND BELOW 50
DEG. C. - DO NOT PUNCTURE OR INCINERATE ANY AEROSOL PRODUCTS - KEEP AWAY FROM
CHILDREN, PETS, FOOD AND IRRESPONSIBLE PEOPLE
USE IN WELL VENTILATED
AREAS.
Ingredients: Protect.
Saponified oxygenated waxes, inhibitors, hydrocarbons diluents and surfactants.
Applications:
Used for the lasting prevention of rusting and corrosion at the coast or in areas of high humidity.
Vehicles
: For, panels, doors, and box sections.
Moulds
: For use on all injection moulds, rotational moulds, die sets or similar components when
placed in storage.
Machinery
: When machinery or plant is mothballed, or operates under conditions of high humidity.
Batteries
: For use on the terminals of automotive type batteries.
Directions for Use: Spray from a distance of 200 mm onto the surface to be protected. Apply a light
even coat and allow to dry for 1 hour. Surface sprayed will dry to a light brown waxy semi hard touch dry
finish, but will not dry through. Use the separate nozzle and red extension tube supplied to spray into
difficult areas or boxes sections. To remove use paraffin or similar solvent.
Product Data.
Product
UN No.
Density
Flammability
Ozone Friendly
pH Value
Hydroscopic
Water Solubility
Viscosity
Flash Point
Auto Ignition Temp
Oxidising Properties
Toxicity
Chlorinated agents
Shelf Life
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Anti-Corrosion Protective Wax.
1011
0.796 g / ml at 25 deg. C
Highly Flammable
Yes
Neutral
No
Not soluble
81.0 (cSt) @ 40 deg C
(See Fire & Explosion Data)
(See Fire & Explosion Data)
None.
Not applicable under normal usage.
None.
2 Years.
Storage
Spillage
Transportation
:
:
:
Cool dry place below 50 deg. C.
Absorb with sand. Dispose in accordance with local laws.
In accordance with "flammable aerosol product "regulations.
Aerosol Data.
Aerosol can type
:
Valve
:
Actuator
:
Propellant
:
Fill Ratio
:
Propellant Pressure :
Propellant Flammable :
3-piece tin plate.
Standard Precision Valve.
Standard Precision Actuator.
Butane / Propane
Max 75 % by volume.
480Kpa at 25Deg C.
Yes.
PROPELLANT COMPOSITION:
Mixtures of butane and propane (Pressures range from approximately 213 to 853 kPa at 21 degrees C)
Sprayflow aerosol propellants are high purity hydrocarbons derived from the distillation of crude oil. These
propellants are essentially free of unsaturates and sulphur, and are odourless.
PROPELLANT REACTIVITY:
This propellant is stable. Incompatible with strong oxidising agents and concentrated nitric acid. No
hazardous decomposition or combustion products, burning produces carbon monoxide and carbon dioxide.
FIRST AID PROCEDURES: (Always seek medical attention)
Product in Eyes
Product on Skin
Product swallowed
Product inhaled
:
:
:
:
Flood with clean water for 10 minutes keeping the eye open.
Remove clothing, wash with mild soap, flood with water.
Do not induce vomiting. Seek immediate medical attention.
Rest patient until breathing returns to normal.
FIRE AND EXPLOSION DATA (Aerosol):
Flash point
Auto ignition
Flammable limits
:
:
:
Less than – 18 degrees C.
n Butane 372 deg C. Propane 450 deg C.
Upper 10. % U/U Lower 1.8
HAZARD – Fire / Explosion.




This product is highly flammable.
Exposure to fire or temperatures above 50 deg. C may cause containers to rupture / explode.
Exploding containers that have ignited may travel considerable distances and may cause secondary
fires.
Incomplete combustion may cause carbon monoxide.
FIRE FIGHTING MEASURES:
Use CO2, Dry Powder or water Mist.