R
RESIDENTIAL
philihardware.com
New
The IP/IS Series
Interconnected
Lock is a new
addition to our
contemporary locks.
They are designed
to fit with ADA
requirements.
1
Security Features
200B Series ANSI Grade 3 Certified Deadbolt
(ANSI/BHMA A156.5-2001) for Auxiliary Lock and Associated Products
Product meets and exceeds ANSI Grade 3 requirements for auxiliary locks
CONSTRUCTION
Steel construction for
long-lasting operation.
Exposed trim finish meets or exceeds
96hrs Salt Spray test required by
ANSI (American National
Standard Institute.)
OUTSIDE COVER
Wrought brass or
stainless steel cover.
Twisting the latch bolt to adjust the backset.
SCREWS
Combination screws suitable
for both wood door or metal
door mounting.
STRIKE
Standard 1-3/4” x 2-1/4”
full lip strike.
CYLINDER
5pins tumbler cylinder
LATCH
Precision cylinder
construction provides
excellent operative
durability and reliability.
¼” dia hardened steel
rod insert to resist
sawing and cutting.
Pre-drilled construction
hole for construction
keying.
Full 1” throw antirust
stainless steel latch bolt.
Nickel plated solid brass key.
1” x 2-1/4” Mortise in
deadlatch, adjustable
for both 2-3/8” and 2-3/4”
backset requirement.
500T Series ANSI Grade 3 Certified Leverset
(ANSI/BHMA A156.2-2003) for bored & preassembled locks & latches
Product meets and exceeds ANSI Grade 3 requirements for single-point locks and latches
LEVER
ROSETTE
Solid Zinc lever.
Wrought brass or stainless
steel cover.
Reversible lever design for
both right-hand and left-hand
door mounting.
CONSTRUCTION
Steel construction with square
spindle mechanism for long lasting
operation.
Multiple design and finish to
meet variety demands.
(Please refer to page 9-10 for detail)
Exposed trim finish meets or exceeds
96hrs Salt Spray test required by ANSI
(American National Standard Institute).
Interior and exterior aligning tabs.
For mounting on ø2-1/8" standard
door prep.
SCREWS
Combination screws
suitable for both wood
door or metal door mounting.
STRIKE
Standard 1-3/4” x 2-1/4”
full lip strike with
adjustable tab.
CYLINDER
5pins tumbler cylinder
LATCH
Precision cylinder construction
provides excellent operative
durability and reliability
1” x 2-1/4” Mortise in latch,
adjustable for both 2-3/8”
and 2-3/4” backset requirement.
Pre-drilled construction
hole for construction keying.
Industrial standard
1/2” throw latch bolt.
Nickel plated solid brass key.
2
Contemporary Design
KELLINGTON
HANDLESET
AM SERIES LEVER
HOLLYWOOD (HW)
US15
2-23/64"
2-3/8"~2-3/4"
1/2”
3-15/16"
3-15/16"
2-33/64"
1-3/8"~2"
2-1/4"
37/64"
1"
1-3/8"~2"
1-3/8”~1-3/4”
1-1/8”
1”
2”
2-9/16” 5” or 5-1/2”
2-1/4”
4-1/2”
3-1/2”
2-1/4”
2-3/8”~2-3/4”
2-3/4”
1”
SOHO RC (SH) US26
Round Rosette
2-31/64”
8-27/64”
13-15/16”
2-3/4”
2-11/32"
1/2”
3-15/16"
KELLINGTON (KN)
US15
SOHO SQ (SH) US15
Square Rosette
1-3/8"~2"
FINISHES
US15
Satin Nickel
3
US26
US26D
Polish Chrome Satin Chrome
(Soho & Deadbolt only)
AUSTIN (AT)
US26
ANSI Grade 3
UL
5-1/2” CTC
INTERCONNECTED
LOCK
R
LISTED
200LT DEADBOLT
NEW!
LTR
US26
IP
US26
SPECIFICATIONS
Door Prep
Door Fitting
Cylinder
Latch
Latch Bolt
Strike
Door Handing
ADA
IS
US26
2-1/8” cross bore, 1” edge bore.
Handleset: 1-3/8”~1-3/4”, 2” door with thick door kit.
Deadbolt/Lever 1-3/8”~2”.
KW1 standard, SC1 optional.
2-3/8” and 2-3/4” adjustable.
UL latch for IS/IP series.
Deadbolt: 1” throw.
Lever: 1/2” throw.
2-1/4” full lip round corner.
Handleset/Privacy Lever: handed (specify LH or RH when ordering).
Deadbolt Interior turn piece & Privacy Lever with Push Button.
Meets 4.13.9 ADA requirements.
LTS
US26
R
by PHILADELPHIA HARDWARE GROUP
4
Interconnected
ENTRANCE HANDLESETS
NEW!
CHATEAU (CH)
US10B
FAIRMONT (FT)
US15
1-3/8” ~ 2”
2-27/32”
5-1/2”
2-3/8” and 2-3/4”
15-29/32”
4-7/32”
Ruby
Venezia
7-15/16”
2-9/16”
2-3/4”
2-53/64”
2-3/8” and 2-3/4”
2-3/8” and 2-3/4”
2-27/32”
1-3/8” ~ 2”
3-1/8”
1-3/8” ~ 2”
4-9/64”
2-9/16”
7-15/16”
Royal
7-15/16”
2-9/16”
15-27/32”
5-1/2”
2-13/32”
16-3/4”
10-9/32”
5-1/2”
3-1/16”
2-53/64”
RICHMOND (RI)
PVD
5
HAMPTON (HA)
US12P
4-1/16”
Hartford
Solid Brass
500TB SERIES LEVERSETS
HARTFORD (HD)
US12P
ANSI Grade 3
2-9/32”
1-3/8” ~ 1-3/4”
2-9/32”
2-9/16”
4-7/32”
FASCINITE (FE)
US15A
1-3/8” ~ 1-3/4”
2-31/64”
2-13/32”
2-9/16”
4-11/64”
LAFAYETTE (LA)
US15
2-7/8”
1-3/8” ~ 1-3/4”
2-19/32”
2-9/16”
4-7/32”
2-13/32”
1-3/8” ~ 1-3/4”
2-13/32”
VENEZIA (VA)
US10B
2-9/16”
4-1/16”
R
by PHILADELPHIA HARDWARE GROUP
6
Interconnected
IL SERIES
UL
R
LISTED
301IL-CT
Charlotte (CT) Lever
US15
300IL-RY
Royal (RY) Lever
US15
300IL-SD
San Diego (SD) Lever
US15
3-5/16”
4”
7-15/16”
3-5/16”
4”
4-43/64”
4-39/64”
1-3/8” ~ 1-3/4”
1-5/8” ~ 2”
7
Mounting without
Exterior Escutcheon Plate
ANSI Grade 2
IZ SERIES
UL
R
NEW!
LISTED
2-53-64”
1-5/64”
1-3/8” ~ 1-3/4”
17/32”
45/64”
5-1/2’”
2-61/64”
9-19/32”
1-57/64”
2-9/16”
2-3/8”
2-3/4”
2-41/64”
2-9/16”
4-9/64”
301IZ-CT
Charlotte (CT) Lever
US15
7/16” 23/64”
27/64” 11/32”
301IZ-CT-US15
Charlotte (CT) Lever
301IZ-SD-US15
San Diego (SD) Lever
INTERIOR APPLICATION
South Bay
Escort
R
by PHILADELPHIA HARDWARE GROUP
8
Handlesets & Levers
400 SERIES HANDLESETS
500T SERIES LOCKSETS
ROYAL (RY)
US10B
MANHATTAN (MH)
US5
ESCORT (ET)
US3
MAYFAIR (MA)
US10B
PALMER (PA)
US26
IMPERIAL (IM)
US15
KELLINGTON (KN)
US12P
9
SHELBY (SY)
US12P
Lever Design
ANSI Grade 3
500T SERIES LOCKSETS
CAMBER (CM)
US15
JURAN (JU)
US15A
NEW!
Knob Design
100T SERIES LOCKSETS
RUBY (RB)
US12P
OLYMPUS (OS)
US10B
COMBOSET
300T Series
300T
US32D
BALA (BA)
US32D
GUARDIAN (GN)
US32D
ESCUTCHEON PLATE
5” CENTER TO CENTER
US3
R
by PHILADELPHIA HARDWARE GROUP
10
Deadbolt
200B SERIES
SINGLE CYLINDER
US3
DOUBLE CYLINDER
US3
ONE SIDED (Full Bore) ONE SIDED (Half Bore)
US32D
US32D
Sliding
DOOR LOCK
2-3/4”
SPECIFICATIONS
US3
2-1/4”
Passage
US15
Door Prep
Door Fitting
Exposed Trim
Strike
2-1/4” H x 1-3/4” W notch.
1-3/8” ~ 1-3/4” door thick.
Brass, stainless steel, or zinc alloy.
1” x 2-1/4” rectangular.
Privacy
NEW!
Fits 2-1/8” cross bore
2-3/8” fixed
backset latch
US15
Passage
US15
Privacy
FINISHES
PVD
Lifetime
US3
Polish Brass
US5
Antique Brass
US10B
US12P
Oil Rubbed Bronze Tuscany Bronze
Not all styles available in all finishes. See finish chart on page 12 for details.
11
US15
Satin Nickel
US15A
Pewter
US26
Polish Chrome
Finish
AVAILABILITY
SERIES
ITEM
Abbrev
PVD US3 US5 US10B US12P US15 US15A US26 US26D US32D
505
605
609
613 619
620
625
626
Interconnected Handleset and Solid Brass Levers
CHATEAU
(CH)
400
FAIRMONT
Interconnected
(FT)
HAMPTON
(HA)
RICHMOND
(RI)
500TB
FASCINITE
(FE)
HARTFORD
(HD)
Solid Brass
LAFAYETTE
(LA)
VENEZIA
(VA)
Handleset, Interconnected Lock, Levers, Knob, Deadbolt and Combo Pack
400
IMPERIAL
(IM)
KELLINGTON
(KN)
2PC Type
MAYFAIR
(MA)
500T
CAMBER
(CM)
ESCORT
(ET)
JURAN
(JU)
MANHATTAN
(MH)
PALMER
(PA)
ROYAL
(RY)
SHELBY
(SY)
300IL 4”CTC
300IZ 5-1/2CTC
200B
DEADBOLT
BALA
100T
(BA)
GUARDIAN
(GN)
OLYMPUS
(OS)
RUBY
(RB)
300T/310T Combo
Contemporary Interconnected Lock, Levers and Deadbolt
500AM
AUSTIN
(AT)
Contemporary
HOLLYWOOD
(HW)
SOHO
(SH)
301IP 5-1/2” CTC
301IS 5-1/2” CTC
200TS
DEADBOLT
200TR
DEADBOLT
Product avaialble in stock. Please refer to price book for details. Other finishes may be available upon request. Please allow longer lead time, min. 300 lock order.
Accessories
Lock Strikes
630
9101
9102
9103
9108
9125
1-1/8” x 2-3/4”
“T” type with tab
1-3/4” x 2-1/4”
Full lip with tab
square corner
1-3/4” x 2-1/4”
Full lip with tab
1/4” radius round corner
1-3/4” full round with
tab for tubular type
drive-in latch
1-1/4” x 2-3/4”
“T” type adjustable
9111
9112
9113
9117
9119
1-1/8” x 2-3/4”
Rectangular
square corner
1” x 2-1/4”
Rectangular
square corner
1” x 2-1/4”
Rectangular
1/4” radius round corner
1-3/4” x 2-1/4”
Full lip
1/4” radius round corner
1-1/4” x 3-5/8”
Security strike
1/4” radius round corner
Deadbolt Strikes
Keys
KW1 5-Pins
TE5
HK5
SC1 5-Pins
SC5
SC4 6-Pins
HK6
SC6
9301-K
KW1
9301-S
SC1 & SC4
R
by PHILADELPHIA HARDWARE GROUP
12
Accessories
Dead Latches for
100T Entrance
Latches for 200B
Optional: 9091 square corner
9091UL UL square corner
9092UL UL round corner
Optional: 9071 square corner
9073
Mortise Dead Latch
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
Dead Latches for
500TB Entrance
Mortise Deadbolt Latch
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
Optional: 9050 square corner
9050UL UL square corner
9050RUL UL round corner
9075
9093
9050R
Drive-in Dead Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
D904
9092
Mortise Dead Latch (Brass Bolt)
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
Dead latch drive-in cap for converting
mortise latch to Drive-in Latch
9050C
Spring Latches for
101T, 102T, 501TZ, 502TZ
Drive-in Dead Latch (Brass Bolt)
2-3/8” or 2-3/4” adjustable backset
1” Diameter
Optional: 9072 square corner
Drive-in Deadbolt Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
D909
Deadbolt latch drive-in cap for converting mortise latch to Drive-in Latch
Spring Latches for
400 Handleset (MA/IM/CA/KN)
Optional: 9080 square corner
9080UL UL square corner
9080RUL UL round corner
9080R
9074
Mortise Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
9076
Drive-in Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
D907
Spring latch drive-in cap for converting
mortise latch to Drive-in Latch
Dead Latches for
500TZ Entrance
(VA/HD/FE/LA)
9080C
Drive-in Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
Spring Latches for
AM Series (SH/HW/AT)
Optional: 9079 square corner
9079UL UL square corner
9079RUL UL round corner
Optional: G90A3T square corner
9079R
Optional: 9045 square corner
Mortise Dead Latch
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
Dead latch drive-in cap for converting
mortise latch to Drive-in Latch
Mortise Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
G90A3C
9079C
Drive-in Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
Drive-in Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
9045C
Drive-in Dead Latch
2-3/8” or 2-3/4” adjustable backset
1” Diameter
G90A3R
Mortise Spring Latch (Brass Bolt)
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
9045R
D924
Mortise Spring Latch
2-3/8” or 2-3/4” adjustable backset
1” x 2-1/4” Round Corner Faceplate
Spring Latches for
400 Interconnected
Handleset (RI/CH/HA/FT),
501TB, 502TB, and
400 Handleset (MA/IM/KN)
with Solid Brass lever
D927
Spring latch drive-in cap for converting
mortise latch to Drive-in Latch
D927
Spring latch drive-in cap for converting
mortise latch to Drive-in Latch
Parts
9782
4-way plate is available for
converting drive-in latch to
1” x 2-1/4” square mortise latch.
13
Functions
400 Series Handleset – ANSI A156.2, Series 4000, Grade 3
400
410
501T
502TP
400 Single Cylinder Interconnected Handleset (ANSI F102)
Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever.
Both deadbolt and latch bolt are retracted to unlocked position by operating inside lever.
410 Double Cylinder Handleset
Deadbolt thrown or retracted by key from either side. Latch retracted by thumbpiece from outside or by inside knob/lever.
405
500T
400 Single Cylinder Handleset
Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever.
500TP
405 Dummy Handleset
For use as door pull or as dummy trim on inactive leaf of double door. Fixed thumbpiece and inside knob/lever. Dummy cylinder with inside plate.
500T Series Lever Lock – ANSI A156.2, Series 4000, Grade 3
500T Entrance
Turn button lock/unlock outside lever. Key lock/unlock from outside.
500TP Entrance (Push Button)
Push inside button locks outside lever. Key lock/unlock from outside. Unlock by push down inside lever.
502T
501T Passage
Both levers always unlocked.
502T Privacy
Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism.
515T
500TP/502TP
Push Button
available
502TP Privacy (Push Button)
Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism. Unlock by push down inside lever.
515T Dummy
Dummy trim for one side on door. Used for door pull or matching inactive trim.
100T Series Knob Lock – ANSI A156.2, Series 4000, Grade 3
100T
100T Entrance
Turn button lock/unlock outside knob. Key lock/unlock from outside.
101T Passage
Both knobs always unlocked.
101T
102T
102T Privacy
Turn inside button locks outside knob. Can be opened from outside using outside turn mechanism.
115T Dummy
Dummy trim for one side on door. Used for door pull or matching inactive trim.
115T
200
210
200 Series Deadbolt Lock – ANSI A156.36, Grade 3
200 Single Cylinder
Deadbolt thrown or retracted by key from outside or by inside turnpiece.
210 Double Cylinder
Deadbolt thrown or retracted by key from either side.
205
205 One-sided Half-Bore
Deadbolt thrown or retracted by thumbpiece from inside.
206 One-sided Full-Bore
Deadbolt thrown or retracted by thumbpiece from inside. Cover plate outside.
206
301
300 Series Interconnected Locks – ANSI A156.12, Grade 3
301 Entrance Single Locking, ANSI F95
Latch bolt operated by lever from either side. Deadbolt operated by turn from inside or key from outside. Operating inside lever retracted both
deadbolt and latch bolt.
300 Entrance Double Locking, ANSI F97
Deadbolt operated by key from outside or by turnpiece inside. Deadlatch is locked by key from outside or by push button from inside. Turn inside
lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed.
300
304
304 Storeroom Double Locking, ANSI F98
Deadbolt operated by key from outside or by turnpiece inside. Outside lever is fixed, entrance by key only. Turn inside lever to release deadbolt
and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed.
R
by PHILADELPHIA HARDWARE GROUP
14
DISTRIBUTION BY:
Philadelphia Hardware Group Inc.
SAN DIEGO DISTRIBUTION CENTER
(Home Office)
6590 Top Gun Street
San Diego, CA 92121
Tel: (858) 642-0450
Fax: (858) 642-0454
Toll Free Tel: 1-800-545-2309
Toll Free Fax: 1-800-828-0988
www.philihardware.com
CHICAGO DISTRIBUTION CENTER
3687 Darlene Court
Aurora, IL 60504
Toll Free Tel: 1-800-545-2309
Copyright ©2015 Philadelphia Hardware Group Inc. All rights reserved.
ATLANTA DISTRIBUTION CENTER
2319 Defoor Hills Road N.W.
Atlanta, GA 30318
Toll Free Tel: 1-800-545-2309