Meter
Valves
Meter Couplings | U-Branch Assemblies
11/12
Table of Contents
Page
Page
Outlet Connections......................................................... 2
Accessories
Ball Valve Handles........................................................ 12
Gaskets........................................................................ 12
Meter Coupling
Straight.......................................................................3-5
90º Angle...................................................................... 6
Straight Valves
Ball Style...................................................................... 13
Angle Valves
Angle Valves................................................................... 7
Full Port.......................................................................... 8
Straight.......................................................................... 9
Flanges
Oval & Round Flanges & Test Tee
U-Branches
Oval Meter Flanges....................................................... 10
Round........................................................................... 11
Meter Test Tee.............................................................. 11
Oval Flanged Valves...................................................... 14
Oval Flanged - 1/4 Bend.............................................. 17
U-Branch & Assemblies.......................................... 15-16
Outlet Connections
Flare
2
-22, -33, -44
G & -3G
H & -3H
Q & -3Q
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
T
11-12
Meter Valves
Meter Couplings - Straight
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700 and include hole for wire seal unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
74619
74619F
74620
74620H
End Connection
MNPT
Model #
Description
Lay Length 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
74619 5/8"
Adapter
74619 5/8" x 1/2" Adapter
74619 3/4"
Adapter
74619 3/4" x 1" x 2.18" Adapter
1 15/16
●●
●
●
2.18
●
●
●
●
●
74619 3/4" x 2.43
Adapter
2.43
74619 1"
Adapter
2 1/4
74619 1" x 1 1/4" x 2.12" Adapter
FNPT
5/8" 5/8" x 3/4" or 3/4" 1" 1 1/2" 2"
3/4"
1" Meter
Meter
Meter Meter Meter
●
1 15/16
4620HEX Driving Key
74620 3/4" x 81⁄2"
●
2.12
●
●
●
74619 1 1/2"
Adapter
2
74619 2"
Adapter
3●
74619A 3/4" x 6.2"
Adapter
74619C 1 1/2" Adapter
74619F 3/4"
Coupling nut
74619F 1"
Coupling nut
74620 5/8"
Ribbed tail piece
2 3/8
6.2
●
●
2
●
●
●
74620 5/8" x 3/4"
Ribbed tail piece
2 3/16
Ribbed tail piece
2
●
74620 3/4" x 2 1/4"
Ribbed tail piece
2 1/4
●
●
74620 3/4" x 1/2"
Ribbed tail piece
2 3/8
●
●
●
●
74620 3/4"
Ribbed tail piece
2 1/2
74620 3/4" x 1"
Ribbed tail piece
2 1/2
74620 3/4" x 2 3/4"
Ribbed tail piece
2 3/4
●
●
74620 3/4" x 3"
Ribbed tail piece
3
●
●
●
●
●
●
74620 3/4" x 8 1/2"
Cast w/wrench flats
8 1/2
●
●
74620 3/4" x 12"
Cast w/wrench flats
12
●
●
74620 1"
Ribbed tail piece
74620 1" x 3/4" x 1.75" Ribbed tail piece
2 5/8
1 3/4
●
●
74620 3/4" x 2"
●
●
●
●
●
74620 1" x 3"
Ribbed tail piece
3
●
●
74620 1" x 3 1/2"
Ribbed tail piece
3 1/2
●
●
74620 1" x 8 1/2"
Ribbed tail piece
8 1/2
●
●
74620 1" x 12"
Ribbed tail piece
12
●
●
74620 1 1/2"
74620 2"
Ribbed tail piece
Ribbed tail piece
2 3/4
●
3
●
●
●
74620H 3/4" x 1 7/16" Tail piece w/internal drive hex
1 7/16
●
●
74620H 3/4" x 1 1/2"
1 1/2
●
●
●
●
Tail piece w/internal drive hex
74620H 3/4" x 1 5/8"
Tail piece w/internal drive hex
1 5/8
74620KIT 5/8"
Ribbed tail piece-2 per kit
2 3/8
●
●
●
●
1 5/8
●
1 25/64
●
●●
74620KIT 3/4"
Ribbed tail piece-2 per kit
2 1/2
74620KIT 1"
Ribbed tail piece-2 per kit
2 5/8
74620KIT 1 1/2"
Ribbed tail piece-2 per kit
2 3/4
74620KIT 2"
Ribbed tail piece-2 per kit
●
●
●
●
3
●
●
●
●
4620HEX 5/8"
Hex Driving Key for 4620H
4
-
-
-
-
-
-
●
4620HEX 13/16"
Hex Driving Key for 4628H
4
-
-
-
-
-
-
●
OPTIONS
- Fiber or leather gaskets sold separately.
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
3
Meter Valves
Meter Couplings - Straight
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700 and include hole for wire seal unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
74620MM 74622
74624
74626
End Connection
MNPT
Model #
Description
Lay Length 1/2" 3/4" 1"
74628
74628H
5/8" 5/8" x 3/4" or 3/4" 1"
Meter
Meter
Meter
74620MM 3/4
Meter x Meter Coupling
2 1/4
●
74620TUB 3/4" x 4.00
Tailpiece is copper tube
4.00
●
●
74620TUB 3/4" x 12.50
Tailpiece is copper tube
12.50
●
●
74620TUB 1" x 10.00
Tailpiece is copper tube
10.00
74622 5/8
Ribbed tail piece ▼
2 3/8
74622 3/4
Ribbed tail piece ▼
2 1/2
74622 1
Ribbed tail piece ▼
2 5/8
74624 5/8
Machined tail piece ▼
2 3/8
74624 3/4
Machined tail piece ▼
2 1/2
●
●
74624 3/4 x 1 13/16
Machined tail piece ▼
1 13/16
●
●
74624 3/4 x 2
Machined tail piece ▼
2
●
●
74624 3/4 x 2 1/4
Machined tail piece ▼
2 1/4
●
●
74624 3/4 x 2 11/16
Machined tail piece ▼
2 11/16
●
●
74624 1
Machined tail piece ▼
2 5/8
●
●
74624 1 x 1 13/16
Machined tail piece ▼
1 13/16
●
●
74624 1 x 2
Machined tail piece ▼
2
●
●
74624 1 x 2 11/16
Machined tail piece ▼
74626 5/8
Machined tail piece 2 3/8
74626 3/4
Machined tail piece 2 1/2
74626 1
Machined tail piece 2 5/8
74628 5/8 x 1.25
Machined tail piece 1 1/4
●
●
●
●
●
●
2 11/16
●
●
●
●
●
●
●
●
●
●
●
●
●
●
74628 5/8 x 1.50
Machined tail piece 1 1/2
●
●
74628 5/8 x 2.17
Machined tail piece 2 11/64
●
●
74628 5/8 x 2
Machined tail piece 2
●
●
74628 3/4 x 1.25
Machined tail piece 1 1/4
●
●
74628 3/4 x 2
Machined tail piece 2
● ●
74628 1 x 2
Machined tail piece 2
●
●
74628H 1 x 1.50
Tail piece w/internal driving hex
1 1/2
●
●
74628H 1 x 2
Tail piece w/internal driving hex
2
●
●
74628KIT 5/8 x 1.25
Tail piece w/internal driving hex
1 1/4
74628KIT 3/4 x 1.25
Tail piece w/internal driving hex
1 1/4
● ●
●
End Connection
FNPT
Model #
Description
Lay Length 1 1/2"
2"
74620BB 1 1/2
74620BB 2
Meter Coupling Bushing
Meter Coupling Bushing
●
MNPSMT
2"
2 1/2"
1 1/2
●●
1 3/4
●
For use with
1 1/2" & 2" straight
meter couplings to
facilitate tapped
meter removal
●
74620BB
METER
OPTIONS
▼Swivel nuts without hole for wire seal.
- Fiber or leather gaskets sold separately.
4
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
Meter Couplings - Straight
74638G
For additional end
connection options,
see page 2.
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700,
and include hole for wire seal unless otherwise indicated. EPDM rubber gaskets are
supplied and are standard.
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
74636
Model #
End Connection
74637
5/8" Meter
5/8" x 1/2"
74660M
5/8" x 3/4" or 3/4" Meter
3/4"
3/4" x 1" 3/4" x 1 1/4"
1"
74636
Male Meter Thread
●
74637FNPT
●
●
●
74638
Copper Flare ●
●
74638-22 -22 CTS Compression
●
●
●
●
●
74638G
G CTS Compression
●
●
●
●
74638Q
Q CTS Compression
●
●
●
●
74638T
T CTS Compression
●
●
●
●
74638-33 -33 PEP Compression
●
●
●
74638-3G -3G PEP Compression
●
●
●
74638-3Q -3Q PEP Compression
●
●
●
74638-44 -44 PVC Compression
●
●
●
74638-55 -55 IP Compression
●
●●
74660M
PEP Barbed
●
1" Meter
1" x 1 1/4"
●
●
●
●
●
Single size denotes same size inlet and outlet. When more than one size is listed first size is swivel nut, second is connection.
OPTIONS
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- Fiber or leather gaskets sold separately.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only), i.e. (74638Q = 746638K).
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74638 = 74638L).
-5/09
Flare nuts available with anode connection; add “A” to end of model number, i.e. (74638 = 74638A).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74638Q = 74638QA).
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
5
Meter Valves
Meter Couplings - 90º Angle
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700, and include hole for wire seal, unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
74621
Model #
74632
5/8" Meter5/8" x 3/4" or 3/4" Meter
End Connection
5/8" x 1/2" 5/8" x 3/4" 3/4" x 1/2" 3/4" 3/4" x 1"
74621MNPT ●
●
● 74623▼MNPT
74632FNPT ●
1" Meter
1"
●
●
●
●
●
●
●
Single size denotes same size inlet and outlet. When more than one size is listed first size is swivel nut, second is connection.
74783S
For additional end
connection options,
see page 2.
Model #
End Connection
5/8" Meter 5/8" x 3/4" or 3/4" Meter 1" Meter
3/4" x 5/8" 3/4"
1" x 3/4"
1"
74783S
74783S-22
74783SG
74783SQ
74783ST
74783S-33
74783S-3G
74783S-3Q
Copper Flare ●
●
-22 CTS Compression
●
●
●
G CTS Compression
●
●
Q CTS Compression
●
●
T CTS Compression
●
●
●
-33 PEP Compression
●
-3G PEP Compression
●
-3Q PEP Compression
●
●
●
●
Single size denotes same size inlet and outlet. When more than one size is listed first size is connection, second is swivel nut.
OPTIONS
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- Fiber or leather gaskets sold separately.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only), i.e. (74783SQ = 74783SK).
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74783S = 74783SL).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (74783S = 74783SA).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74783SQ = 74783SQA).
▼Meter nuts without hole for wire seal.
6
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
Angle Valves - Plug Style
100 PSI - LOCKWING | FOR 5/8", 5/8" x 3/4", 3/4", OR 1 " METERS
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700, and include hole for wire seal unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
-Order Meter Valves by Model Number & Valve Size
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
-Angle plug valve operating head rotates 180º open to close.
-Plug valves are directional.
74602
74604*
For additional end
connection options,
see page 2.
Model #
End Connection
74604*FNPT 74602
Copper Flare
74602-22 -22 CTS Compression
74602G
G CTS Compression
74602Q
Q CTS Compression
74602T
T CTS Compression
74602-33 -33 PEP Compression
74602-3G -3G PEP Compression
74602-3Q -3Q PEP Compression
74602-44 -44 PVC Compression
74602-55 -55 IP Compression
5/8" Meter
5/8" x 3/4" or 3/4" Meter
3/4" x 5/8" 1" x 5/8"
3/4"
1" x 3/4"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1" Meter
1"
1 1/4" x 1"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Single size denotes same size inlet and outlet. When more than one size is listed first size is connection, second is swivel nut.
OPTIONS
*Swivel nut includes saddle.
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- Fiber or leather gaskets sold separately.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only), i.e. (74602Q = 74602K).
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74602 = 74602L).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (74602 = 74602A).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74602Q = 74602QA).
- Angle meter valves are available with various ends connections in place of meter swivel nut (see Curb Stop Catalog).
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
7
Meter Valves
Full Port Angle Valves - Ball Style
300 PSI - LOCKWING | FOR 5/8", 5/8" x 3/4", 3/4", OR 1 " METERS
(For Angle Valves for 1 1/2" or 2" Meters, see page 14)
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700, and include hole for wire seal unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
-Order Meter Valves by Model Number & Valve Size
-Angle ball valve operating head rotates 90º open to close.
-Insert stiffeners are required on all flexible plastic -Angle meter ball valves are non-directional
connections, see the Service Fittings catalog for more information.
74602B-22
74604B*
For additional end
connection options,
see page 2.
Model #
End Connection
74604B*FNPT 74602B
Copper Flare
74602B-22 -22 CTS Compression
74602BG
G CTS Compression
74602BQ
Q CTS Compression
74602BT
T CTS Compression
74602B-33 -33 PEP Compression
74602B-3G -3G PEP Compression
74602B-3Q -3Q PEP Compression
74602B-44 -44 PVC Compression
74602B-55 -55 IP Compression
5/8" Meter
5/8" x 3/4" or 3/4" Meter
1" Meter
3/4" x 3/4" x 5/8" 1" x 3/4" x 5/8" 3/4" 1" x 3/4" x 3/4" 1 1/4" x 3/4" x 3/4" 3/4" x 1" x 1" 1" 1 1/4" x 1" x 1"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Single size denotes same size inlet, ball and outlet. When multiple sizes are present first is connection, second is ball, and third is meter swivel nut.
OPTIONS
*Swivel nut includes saddle.
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- Fiber or leather gaskets sold separately.
- For 360º operating head rotation contact factory.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only) i.e. (74602BQ = 74602BK).
- Product available marked for Reclaimed Water, denote at end of model number; “RWC” (integral cap with warning) i.e. (74604B = 74604BRWC) or “RWT” (tagged) i.e. (74604B = 74604BRWT).
- Ball valves available with Double Lock Wing for locking in open or closed position; add “WW” to end of model number, i.e. (74604B = 74604BWW).
- Stainless steel or brass handles sold separately, see page 12. Brass handles available factory installed or integral to operating head; contact factory.
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74602B = 74602BL).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (74602B = 74602BA).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74602BQ = 74602BQA).
- Angle meter valves are available with various ends connections in place of meter swivel nut (see Curb Stop catalog).
8
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
Angle Valves - Standard Port
BALL STYLE - 300 PSI - LOCKWING | FOR 5/8", 5/8" x 3/4", 3/4", OR 1 " METERS
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700, and include hole for wire seal unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
-Order Meter Valves by Model Number & Valve Size
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
74644B*
-Angle ball valve operating head rotates 90º open to close.
-Angle meter ball valves are non-directional
74642B-22
For additional end
connection options,
see page 2.
Model #
End Connection
74644B*FNPT 74642B
Copper Flare
74642B-22 -22 CTS Compression
74642BG
G CTS Compression
74642BQ
Q CTS Compression
74642BT
T CTS Compression
74642B-33 -33 PEP Compression
74642B-3G -3G PEP Compression
74642B-3Q -3Q PEP Compression
74642B-44 -44 PVC Compression
74642B-55 -55 IP Compression
5/8" Meter
5/8" x 3/4" or 3/4" Meter
5/8"
1" x 5/8"
3/4"
1" x 3/4"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1"
●
●
●
●
●
●
●
●
●
●
●
1" Meter
1 1/4" x 1"
●
●
●
●
●
*Single size denotes same size inlet and outlet. When more than one size is listed first size is connection, second is swivel nut.
OPTIONS
*Swivel nut includes saddle.
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- Fiber or leather gaskets sold separately.
- For 360º operating head rotation contact factory.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only) i.e. (74642BQ = 74642BK).
- Product available marked for Reclaimed Water, denote at end of model number; “RWC” (integral cap with warning) i.e. (74644B = 74644BRWC) or “RWT” (tagged) i.e. (74644B = 74644BRWT).
- Ball valves available with Double Lock Wing for locking in open or closed position; add “WW” to end of model number, i.e. (74644B = 74644BWW).
- Stainless steel or brass handles sold separately, see page 12, brass handles available factory installed or integral to operating head; contact factory.
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74642B = 74642BL).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (74642B = 74642BA).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74642BQ = 74642BQA).
- Angle meter valves are available with various ends connections in place of meter swivel nut (see Curb Stop catalog).
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
9
Meter Valves
Oval Meter Flange
11⁄2" & 2" METERS
EPDM rubber gaskets are supplied and are standard unless noted. Oval meter flanges are faced and drilled per AWWA C700. All
7610 model oval flanges in 2” have bolt holes for 2” meter only.
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
7610F
7610FD
7610FN
7610FKIT
7610M
7610MD
7610A-55
7610S
7610SD
7610Q
7610T
7610-22
7610-44
7610-55
-Stainless steel meter support brackets not included.
-Bolt hole diameters on 1 1/2" oval flange = .72, 2" oval flange = .81.
End Connection Oval Meter Flange
Model # Size
Type
Size 1 1/2" 2" 1 1/2" or 2"
7610F 1 1/2"
FNPT
1 1/2" ●
7610F 1 1/2" x 1" FNPT
1 1/2" ●
7610F 2"
FNPT
2"
●
7610FD 2"
FNPT (Dual drilled bolt holes)
2"
●
7610FN 1 1/2"
FNPT (Bulk packed 10 per less gaskets) 1 1/2" ●
7610FN 2"
FNPT (Bulk packed 10 per less gaskets)
2"●
7610FKIT 1 1/2"
FNPT Complete Kit - 2 per package
1 1/2" ●
7610FKIT 2"
FNPT Complete Kit - 2 per package
2"●
7610M 1 1/2"
MNPT
1 1/2" ●
7610M 2" x 2 1/8" MNPT
1 1/2"
●
7610M 2" x 1 15/16" MNPT
2" ●
7610MD 2" x 2 1/8" MNPT (Dual drilled bolt holes)
2"
●
7610MD 2" x 1 15/16" MNPT (Dual drilled bolt holes)
2" ●
7610A-55 1 1/2"
MNPT - Adjustable
1 1/2" ●
7610A-55 2"
MNPT - Adjustable
2"
●
7610S
1 1/2"
Sweat Connection
1 1/2" ●
7610S
2"
Sweat Connection
2"
●
7610SD
2"
Sweat Connection (Dual drilled bolt holes) 2"
●
7610-22 1 1/2"
-22 CTS Compression
1 1/2" ●
7610-22 2"
-22 CTS Compression
2"
●
7610Q
1 1/2"
Q CTS Compression
1 1/2" ●
7610Q
2"
Q CTS Compression
2"
●
7610T
1 1/2"
T CTS Compression
1 1/2" ●
7610T
2"
T CTS Compression
2"
●
7610-44 1 1/2"
-44 PVC Compression
1 1/2" ●
7610-44 2"
-44 PVC Compression
2"
●
7610-55 1 1/2"
-55 IP Compression
1 1/2" ●
7610-55 2"
-55 IP Compression
2"
●
OPTIONS
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (7610Q=7610QA).
- Dual bolt holes are available; contact factory.
10
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
Round Flanges - 3", 4", & 6"
-EPDM rubber gaskets are supplied and are standard.
-Oval meter flanges are faced and drilled per AWWA C700.
7610R
Model #
610RG
End Connection Round Meter Flange
Type
Size 3"
4"
6"
7610R 3" FNPT
7610R4"FNPT
7610R6"FNPT
610RG3"Gasket
610RG4"Gasket
610RG6"Gasket
7610RK 3" Kit - 2 ea.
7610RK 4" Kit - 2 ea.
7610RK 6" Kit - 2 ea.
3"
●
4"
●
6"
●
3"
●
4"
●
6"
●
3"
●
4"
●
6"
●
7611-44
7610RK
Model #
End Connection Type
Size
610BK 3" Bolt Kit
610BK 4" Bolt Kit
610BK 6" Bolt Kit
Round Meter Flange
3"
4"
6"
3"
●
4"
●
6"
●
7611-55
Model # Size
End Connection Type
Size
7611-44 2"
7611-55 2"
-44 PVC Compression
-55 IP Compression
Male Meter Thread
2"
2"
2"
●
●
Meter Test Tee
Test 11⁄2" and 2" meters while in line
- For new installations or for retrofitting existing installations
- Completely assembled
MODEL DESCRIPTION
FLANGEMETER
SIZE
SIZE
720-HT 1 1/2 Tee with two 76101 ball valves
1 1/2" 1 1/2"
720-HT 2
Tee with two 76101 ball valves
2"
REF.
3 1/8"
2"
- Valves available with or without lockwings.
- 6120B handles are optional-see page 12.
- Other end connections available, contact factory.
11-12
A
4 1/2"
B
REF.
SIZEA B
11⁄2"
75⁄16"85⁄8"
2" 713⁄16"91⁄16"
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11
Meter Valves
Accessories
Ball Valve Handles
6120B
Brass Ball Valve Handle
6120
Stainless Steel Handle
For all McDonald Ball Valves
Order by valve size: 5/8", 3/4", & 1"
For all McDonald Ball Valves
Order by valve size:
5/8", 3/4" & 1"
FH
Fixed Handle
6120BS
Brass Ball Valve Handle
6120D
Stainless Steel Handle
To order add “FH” to model number
Example: 76101MFH (shown above)
Must be assembled by factory
Available on all 3/4", 1", 11⁄2", and 2"
non-lockwing ball valves
For all McDonald Ball Valves
Order by valve size: 1 1/2" & 2"
Same as above, except with hole
drilled in handle.
6120BRW
Brass Ball Valve Handle
Reclaimed water
Order by valve size: 3/4" & 1"
6121 1 1/2" & 2"
Flanged Meter Support Bracket
6120BSRW
Brass Ball Valve Handle
Reclaimed water
Order by valve size: 1 1/2" & 2"
Flange Meter
Support Bracket
Comes standard
with every flanged valve.
Gaskets
Model No.
18-G118-G1F
18-G1L
18-G2
18-G2F
18-G2L
Meteral Type RubberFiber Waxed LeatherRubber
Fiber Waxed Leather
Meter Size 5/8"5/8" 5/8" 5/8" x 3/4" or 3/4" 5/8" x 3/4" or 3/4" 5/8" x 3/4" or 3/4"
Thickness
1/8"
1/16"
1/8" 1/8"1/16"1/8"
Drop In Gasket
Model No.
18-G418-G4F 18-G4L
Meteral Type RubberFiberWaxed Leather
Meter Size 1"1" 1"
Thickness 1/8"1/16" 1/8"
Round Rubber Gasket
Model No.
Description
Meter Size
Thickness
12
4620G 1 1/2"
4620G 2"
Round Rubber
Round Rubber
1 1/2"2"
1/8"1/8"
Model No.
18-G6
18-G7
Description
Flange Rubber
Flange Rubber
Meter Size
1 1/2"2"
Thickness1/8" 1/8"
Nut & Bolt Assembly
6121NB 1 1/2 & 2
Contains 2 each 5/8"-11-2 1/2 zinc plated bolts
and 2 ea 5/8-11 zinc plated nuts.
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
Straight Valves - Ball Style
76100M Flathead 76100MW Lockwing
For additional end
connection options,
see page 2.
300 PSI | FOR 5/8", 5/8" x 3/4", 3/4", OR 1 " METERS
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700,
and include hole for wire seal unless otherwise indicated. EPDM rubber gaskets
are supplied and are standard.
-Order Meter Valves by Model Number & Valve Size.
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
-Angle ball valve operating head rotates 90º open to close.
5/8" Meter
5/8" x 3/4" or 3/4" Meter
1" Meter
Model #
End Connection
1/2" x 5/8" x 5/8" 3/4" x 5/8" x 5/8" 3/4" x 3/4" x 5/8" 1" x 3/4" x 5/8" 3/4" x 5/8" x 3/4" 3/4" 1" x 5/8" x 3/4" 1" x 3/4" x 3/4" 1" x 3/4" x 1"
76101MFNPT ●
●
●
●
●
●
●
76101MWFNPT
●
●
●
●
●
●
●
●
76107MWMNPT
●
●
●
●
76100M
Copper Flare
●
●
●
●
●
●
●
76100MW
Copper Flare
●
●
●
●
●
●
●
76100M-22 -22 CTS Compression
●
●
●
●
●
●
●
76100MW-22 -22 CTS Compression
●
●
●
●
●
●
●
●
76100MG
G CTS Compression
●
●
●
●
●
76100MWG G CTS Compression
●
●
●
●
●
●
●
●
76100MQ
Q CTS Compression
●
●
●
●
●
●
76100MWQ Q CTS Compression
●
●
●
●
●
●
●
●
76100MT
T CTS Compression
●
●
●
●
●
●
76100MWT
T CTS Compression
●
●
●
●
●
●
●
●
76100M-33 -33 PEP Compression
●
●
76100MW-33 -33 PEP Compression
●
●
●
76100M-3Q -3Q PEP Compression
●
●
76100MW-3Q -3Q PEP Compression
●
●
●
76100M-3G -3G PEP Compression
●
●
76100MW-3G -3G PEP Compression
●
●
●
76100M-44 -44 PVC Compression
●
●
76100MW-44 -44 PVC Compression
●
●
●
76100M-55 -55 IP Compression
●
●
76100MW-55 -55 IP Compression
●
●
●
*Single size denotes same size inlet, ball and outlet. When multiple sizes are present 1st connection, 2nd ball, and 3rd meter swivel nut.
1" 11⁄4" x 1" x 1"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
OPTIONS
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- Fiber or leather gaskets sold separately.
- For 360º operating head rotation contact factory.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only) i.e. (76100MQ = 76100MK).
- Product available marked for Reclaimed Water, denote at end of model number; “RWC” (integral cap with warning) i.e. (76100M = 76100MRWC) or “RWT” (tagged) i.e. (76100M = 76100MRWT).
- Ball valves available with Double Lock Wing for locking in open or closed position; add “WW” to end of model number, i.e. (76100MW = 76100MWW).
- Stainless steel or brass handles sold separately, see page 12, brass handles available factory installed or integral to operating head; contact factory.
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (76100M = 76100ML).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (76100M = 76100MA).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (76100MQ = 76100MQA).
- For special lay lengths, contact factory.
- Many other combinations available; contact factory.
- Valve available with or without lock wings.
- Other end connections available; contact factory.
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
13
Meter Valves
Oval Flanged Valves
BALL STYLE - 300 PSI - LOCKWING | FOR 1 1/2" & 2" METERS
Stainless steel meter support brackets furnished with all oval flanged meter valves. EPDM rubber gaskets are supplied and are
standard. Oval meter flanges are faced and drilled per AWWA C700.
- Order Meter Valves by Model Number & Valve Size
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
- Angle ball valves operating head rotates 90º open to close.
- Bolt hole diameters on 1 1/2" oval flange = .72, 2” oval flange = .81.
- 2” oval flanged meter valves have slotted bolt holes to accept 1 1/2" or 2” meters.
- Angle meter ball valves are non-directional.
74602BQ
For additional end
connection options,
see page 2.
Angle
76100MQ Flathead 76100MWQ Lockwing
Straight
Model #
End Connection 74604B 74604BCS 74602B 74602B-22 74602BCS-22 74602BG 74602BCSG 74602BQ 74602BCSQ
74602BT
74602BCST
74602B-44 74602B-55
For additional end
connection options,
see page 2.
FNPT
FNPT
Copper Flare
-22 CTS Compression
-22 CTS Compression
G CTS Compression
G CTS Compression
Q CTS Compression
Q CTS Compression
T CTS Compression
TCTS Compression
-44 PVC Compression
-55 IP Compression
Flange Meter
Support Bracket
Comes standard
with every flanged valve.
Oval Meter Flange
11⁄2"11⁄2" or 2"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Model #
End Connection Oval Meter Flange
11⁄2"11⁄2"" or 2"
76101M FNPT
●
●
76101MWFNPT
●
●
76107M MNPT
●
●
76107MWMNPT
●
●
76100M Copper Flare
●
●
76100MW
Copper Flare
●
●
76100M-22 -22 CTS Compression
●
●
76100MW-22 -22 CTS Compression
●
●
76100MG G CTS Compression
●
●
76100MWG
G CTS Compression
●
●
76100MQ Q CTS Compression
●
●
76100MWQ
Q CTS Compression
●
●
76100MT T CTS Compression
●
●
76100MWT
T CTS Compressio
●
●
76100M-44 -44 PVC Compression
●
●
76100MW-44 -44 PVC Compression
●
●
76100M-55
-55 IP Compression
●
●
76100MW-55 -55 IP Compression
●
●
*Oval meter flange size is the same size as the end connection.
OPTIONS
- For Handyloc - Replace "Q" or "-3Q" with "H" or "-3H" in 3/4" & 1" only.
- For 360º operating head rotation contact factory.
- Product available marked for Reclaimed Water, denote at end of model number; “RWC” (integral cap with warning) i.e. (74604B = 74604BRWC) or “RWT” (tagged) i.e. (74604B = 74604BRWT).
- Ball valves available with Double Lock Wing for locking in open or closed position; add “WW” to end of model number, i.e. (74604B = 74604BWW).
- Stainless steel or brass handles sold separately, see page 12, brass handles available factory installed or integral to operating head; contact factory.
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74602B = 74602BL).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (74602B = 74602BA).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74602BQ = 74602BQA).
14
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
U-Branches & Assemblies w/Valves
Meter swivel nuts include saddle, have internal straight threads per AWWA C700, and include hole for wire seal unless otherwise
indicated. EPDM rubber gaskets are supplied and are standard.
-Insert stiffeners are required on all flexible plastic -Angle ball valves operating head rotates 90º open to close.
connections, see the Service Fittings catalog for -U-branch assemblies with yoke valves can be found in Iron more information.
Yoke catalog. i.e. (709UFCW 1x02x7.5)
-Angle plug valve operating head rotates 180º open to close.
To order U-Branch Assemblies: Model No. 709UCAW 1 x 3/4 x 7.5 means:
709
U
C
A
W
1 X 3/4 X 7.5
Lockwing
Type of valve attached
Size
A = Two angle plug valves
Single opening end (Inlet)
Style
B = Two reduced port angle ball valves
X
U = Standard U-branch
C = Two reduced port inline ball valves
Multiple opening end (Outlet)
T = Angle U-branch
E = Two full port angle ball valves
X
F = Two full port inline ball valves
Spread
G = Two reduced port angle ball valves less check
H = Two reduced port inline ball valves less check
J = Two reduced port inline ball valves with saddle nuts
K = Two full port inline ball valves less check
Swivel Nut /
Model
Size
Inlet
Valve Outlets
Meter Size
Spread 709T2AW 1" x 3/4" x 6.5"
1" -22 CTS Comp.
74604
3/4"
5/8" x 3/4" or 3/4"
6 1/2"
709TTBW
709TFBW 1" x 3/4" x 6.5"
1" FNPT
74644B
3/4"
5/8" x 3/4" or 3/4"
6 1/2"
709TFEW 1" x 3/4" x 6.5"
1" FNPT
74604B
3/4"
5/8" x 3/4" or 3/4"
6 1/2"
709TTEW 1" x 3/4" x 6.5"
1" T CTS Comp.
74604B
3/4"
5/8" x 3/4" or 3/4"
6 1/2"
709T2BW 1" x 3/4" x 6.5"
1" -22 CTS Comp.
74644B
3/4"
5/8" x 3/4" or 3/4"
6 1/2"
U-Branch Assembly
709UFBW
709UCBW
709UTBW
OPTIONS
Type of connection-Single opening end
B =-3G PEP Comp
Q =Q CTS Comp.
C =Copper flare
T =T CTS Comp.
F =FNPT
Y =-3H PEP Handyloc
G =G CTS Comp.
Z =-3Q PEP Comp.
H =H CTS Handyloc 2 =-22 CTS Comp.
K =C903 Comp.
3 =-33 PEP Comp.
L =Copper flare,
4 =-44 PVC Comp.
less nut
5 = -55 IP Comp.
M=MNPT
Model
Size
Inlet
Valve Outlets
Swivel Nut /
Meter Size
Spread 709UFF
709UFAW
709UFAW
709UFBW
709UFCW
709UFFW
709UFJW
709UMGW
709UCAW
709UCBW
709UCBW
709UCEW
709UTAW
709UTBW
709UTBW
709UTBW
709UTCW
709UTCW
709UTEW
709UTGW
709UTHW
709UQAW
709UQCW
709UQEW
709UQFW
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
7 1/2"
7 1/2"
14"
7 1/2"
6 1/2"
7 1/2"
6 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
6 1/2"
7 1/2"
7 1/2"
6 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
7 1/2"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 14"
1" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 5/8" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1 1/2" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" FNPT
1" FNPT
1" FNPT
1" FNPT
1" FNPT
1" FNPT
1" FNPT
1" MNPT
1" Copper Flare
1" Copper Flare
1" Copper Flare
1" Copper Flare
1" T CTS Comp.
1" T CTS Comp.
1" T CTS Comp.
1 1/2" T CTS Comp.
1" T CTS Comp.
1" T CTS Comp.
1" T CTS Comp.
1" T CTS Comp.
1" T CTS Comp.
1" Q CTS Comp.
1" Q CTS Comp.
1" Q CTS Comp.
1" Q CTS Comp.
76101M3/4"
746043/4"
74604
3/4"
74644B
3/4"
76101MW 3/4" x 5/8" x 3/4"
76101MW 3/4"
76101MWS 3/4" x 5/8" x 3/4"
74654B3/4"
746043/4"
74644B
5/8"
74644B3/4"
74604B3/4"
746043/4"
74644B3/4"
74644B3/4"
74644B3/4"
76101MW 3/4" x 5/8" x 3/4"
76101MW 3/4" x 5/8" x 3/4"
74604B3/4"
74654B3/4"
76111MW 3/4" x 5/8" x 3/4"
746043/4"
76101MW 3/4" x 5/8" x 3/4"
74604B3/4"
76101MW3/4"
- Fiber or leather gaskets sold separately.
- For 360º operating head rotation contact factory.
- For C903 connection (Aluminum Core PE), replace “Q” in model number with “K” (3/4” & 1” sizes only) i.e. (709UQAW = 709UKAW).
- Product available marked for Reclaimed Water, “RWC” (integral cap with warning) or “RWT” (tagged), Contact Factory.
- Ball valves available with Double Lock Wing for locking in open or closed position; contact factory.
- Stainless steel or brass handles sold separately, see page 12, brass handles available factory installed or integral to operating head; contact factory.
- Flared ends are available less flare nut; replace "C" with "L" in model number (709UCAW = 709ULAW).
- Flare nuts available with anode connection; contact factory.
- “Q” compression nuts are available with anode connection: contact factory.
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
15
Meter Valves
U-Branches & Assemblies w/Valves
Meter swivel nuts include saddle, have internal straight threads per AWWA C700, and include hole
for wire seal unless otherwise indicated. EPDM rubber gaskets are supplied and are standard.
-Insert stiffeners are required on all flexible plastic connections, see the Service Fittings catalog for more information.
-Angle plug valve operating head rotates 180º open to close.
-Angle ball valves operating head rotates 90º open to close.
-U-branch assemblies with yoke valves can be found in Iron Yoke catalog. i.e. (709UFCW 1 x 02 x 7.5)
709U2BW
To order U-Branch Assemblies: Model No. 709UCAW 1 x 3/4 x 7.5 means:
709
U
C
A
W
1 X 3/4 X 7.5
Lockwing
Type of connection-Single opening end
Type of valve attached
Size
A = Two angle plug valves
B=-3G PEP Comp Q =Q CTS Comp.
Single opening end (Inlet)
Style
B = Two reduced port angle ball valves
T =T CTS Comp.
C =Copper flare
X
U = Standard U-branch
Y =-3H PEP Handyloc C = Two reduced port inline ball valves
F
=
F
NPT
Multiple
opening
end (Outlet)
T = Angle U-branch
Z =-3Q PEP Comp. E = Two full port angle ball valves
G=G CTS Comp.
X
F
=
Two
full
port
inline
ball
valves
H=H CTS Handyloc 2 =-22 CTS Comp.
Spread
3 =-33 PEP Comp. G = Two reduced port angle ball valves less check
K =C903 Comp.
4 =-44 PVC Comp. H = Two reduced port inline ball valves less check
L =Copper flare,
J = Two reduced port inline ball valves with saddle nuts
5 = -55 IP Comp.
less nut
K = Two full port inline ball valves less check
M=MNPT
Swivel Nut /
Spread
Model
Size
Inlet
Valve Outlets
Meter Size
U-Branch Assembly
709U2AW
709U2AW
709U2AW
709U2AW
709U2BW
709U2BW
709U2BW
709U2BW
709U2C
709U2CW
709U2CW
709U2CW
709U2CWF
709U2EW
709U2EW
709U2EW
709U2FWF
709U2GW
709U2HW
709U2HW
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1" x 3/4" x 14"
1 1/2" x 3/4" x 7.5"
1" x 5/8" x 7.5"
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1 1/2" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1 1/2" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 3/4" x 14"
1 1/2" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" x 5/8" x 6.5"
1" x 3/4" x 7.5"
1" x 3/4" x 6.5"
1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1 1/2" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1 1/2" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1 1/2" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp. 1" -22 CTS Comp.
1" -22 CTS Comp.
1" -22 CTS Comp.
74604
74604
74604
74604
74644B
74644B
74644B
74644B
76101M
76101MW
76101MW
76101MW
76101W
74604B
74604B
74604B
76101W
74654B
76111MW
76111MW
3/4" 3/4" 3/4" 3/4" 5/8"
3/4"
3/4"
3/4"
3/4" x 5/8" x 3/4"
3/4" x 5/8" x 3/4"
3/4" x 5/8" x 3/4"
3/4" x 5/8" x 3/4"
3/4" x 5/8" x 3/4"
3/4"
3/4"
3/4"
3/4"
5/8"
3/4" x 5/8" x 3/4"
3/4" x 5/8" x 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
3/4" FNPT
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
3/4" FNPT
5/8"
5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
6 1/2"
7 1/2"
14"
7 1/2"
7 1/2"
6 1/2"
7 1/2"
7 1/2"
6 1/2"
7 1/2"
6 1/2"
7 1/2"
7 1/2"
7 1/2"
14"
7 1/2"
7 1/2"
6 1/2"
7 1/2"
6 1/2"
709UZAW
1" x 3/4" x 7.5"
1" -3Q PEP Comp.
74604
3/4"
5/8" x 3/4" or 3/4"
7 1/2"
709U3AW
709U3BW
1" x 3/4" x 7.5"
1" x 3/4" x 7.5"
1" -33 PEP Comp.
1" -33 PEP Comp.
74604
74644B
3/4" 3/4" 5/8" x 3/4" or 3/4"
5/8" x 3/4" or 3/4"
7 1/2"
7 1/2"
709U4EW
1" x 3/4" x 7.5"
1" -44 PVC Comp.
74604B
3/4" 5/8" x 3/4" or 3/4"
7 1/2"
OPTIONS
- Fiber or leather gaskets sold separately.
- For 360º operating head rotation contact factory.
- Product available marked for Reclaimed Water, “RWC” (integral cap with warning) or “RWT” (tagged). Contact factory.
- Ball valves available with Double Lock Wing for locking in open or closed position; contact factory.
- Stainless steel or brass handles sold separately, see page 12, brass handles available factory installed or integral to operating head; contact factory.
- Flared ends are available less flare nut; replace "C" with "L" in model number (709UCAW = 709ULAW).
- Flare nuts available with anode connection; contact factory.
- “Q” compression nuts are available with anode connection: contact factory.
16
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Meter Valves
Oval Flanged - 1/4 Bends
Stainless steel meter support brackets furnished with all oval flanged meter valves. Oval meter flanges are faced and drilled per
AWWA C700. EPDM rubber gaskets are supplied and are standard.
- Insert stiffeners are required on all flexible plastic connections, see the Service Fittings Service Fittings catalog for more information.
- Bolt hole diameters on 1 1/2” oval flange = .72, 2” oval flange = .81.
- 2” oval flanged meter valves have slotted bolt holes to accept 1 1/2” or 2” meters.
74783FF
Model
74783FT 1 1/2"
74783F-22 1 1/2"
74783FF 1 1/2"
74783FQ 1 1/2"
74783F 2"
74783FT 2"
74783F-22 2"
74783F-44 2"
74783FF 2"
74783FQ 2"
74783F-22
Outlet Size / Style
1 1/2" CTS Compression
1 1/2" CTS Compression
1 1/2" FNPT
1 1/2" CTS Compression
2" Copper Flare
2" CTS Compression
2" CTS Compression
2" PVC Compression
2" FNPT
2" CTS Compression
Oval Flange Size
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
Meter Size
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
1 1/2" or 2"
Comes standard
with every flanged valve.
OPTIONS
- Product available marked for Reclaimed Water, denote at end of model number; “RWP” (pinned stamped) i.e. (74783FRWP/RWT) or “RWT” (tagged).
- Flared ends are available less flare nut; add “L” to end of model number, i.e. (74783F = 74783FL).
- Flare nuts available with anode connection; add “A” to end of model number, i.e. (74783F = 74783FA).
- “Q” compression nuts are available with anode connection; add “A” to end of model number, i.e. (74783FQ = 74783FQA).
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
17
Meter Valves
NO-LEAD AHEAD
Are you ready?
WHAT IS No-lead BRASS?
A.Y. McDonald Mfg. Co. No-Lead Brass products meet the requirements of UNS
Copper Alloy C89833 per ASTM B584-09A. UNS Copper Alloy C89833 Mechanical
properties and Chemical composition have been certified by an independent
testing agency and are listed in ASTM specification B584-09A Copper Alloy Sand
Casting for General Applications (compositions and mechanical properties).
A.Y. McDonald’s No-Lead Brass contains a high percentage of copper and three
main alloying elements - Zinc, Tin and Bismuth.
Zinc is a potent alloying element in copper, imparting strength and hardness.
Tin is a potent solid-solution strengthener in copper, even more so than zinc.
Unlike zinc, tin also improves corrosion resistance.
Bismuth acts very much like lead in many respects. Unlike lead, Bismuth is not
known to be toxic in humans. Bismuth is lead’s neighbor on the periodic chart of
elements, making it’s behavior during casting and solidification similar. Bismuth
is nearly insoluble in copper and causes machining chips to break up into small,
easily removed particles.
How Can A.Y. Help?
A.Y. McDonald is committed to educating and assisting our customers with this transition to no-lead brass. We want to ensure
that this law doesn’t negatively impact your bottom line. As the first manufacturer in the industry to offer and market a complete
line of no-lead brass products – we have over 20 years of experience working in no-lead. During that time, we helped the city of
Los Angeles become the first in the country to transition to no-lead brass. Now we want to share our years of knowledge and
experience with you.
For more information on the industry’s switch to no-lead brass and how you can make the transition successfully,
please go to NOLEADBRASS.com.
For more information on NO-LEAD BRASS and how you can make the transition successfully; or for other product, pricing, and
industry information, sign-up to receive AY ALERTS at www.aymcdonald.com
18
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
11-12
Notes
11-12
800.292.2737 | FAX 800.832.9296 | [email protected] | aymcdonald.com
19
A.Y. McDonald Mfg. Co. is a leading manufacturer of Waterworks Brass, Plumbing Valves,
Pumps and Water Systems, and High Pressure Gas Valves and Meter Bars. The Company has
distinguished itself with a proud tradition of quality and reliability since its founding in 1856.
The mission of A.Y. McDonald Mfg. Co., in the words of our founder, is “to make good products
and sell them honestly.” We, the stockholders and employees, accomplish this by extending
the McDonald family culture through excellent customer service and by focusing on our
customers’ needs.
WARNING: It is unlawful in CALIFORNIA & VERMONT (effective 1/1/2010); MARYLAND (effective 1/1/2012); LOUISIANA
(effective 1/1/2013) and the UNITED STATES OF AMERICA (effective 1/4/2014) to use any product in the installation or repair
of any public water system or any plumbing in a facility or system that provides water for human consumption if the wetted surface
area of the product has a weighted average lead content greater than 0.25%. This prohibition does not extend to service saddles used in
California, Louisiana or under USA Public Law 111-380.
More than a brand. We’re a family.
11/12
aymcdonald.com
1-800-292-2737
[email protected]