Multi-Function Goniometer
Every tool box needs one
Product Description
Model: YC101T~YC104T
Material : Steel and ABS
Size : 310 x 150 x 20mm
Weight : 250g
Easy and sophisticated internal & external angle measurement.
The perfect angle measuring tool for everyone !
This multi-functional goniometer measures overall angle or half
the overall angle (miter angle) simultaneously.
Copy the inside angle or outside angle, tighten up fastener, and
mark by attaching the wing push bar mounted in the left and
right wing bars to the side of member closely.
Information & Specification
Goniometer – a multi-function tool indispensable in ordinary
family as well as for expert professionals such us:
• cabinet-maker
• carpenter
• joiner
• stonemason
• tiler
• building trade
• DIY center
• hardware store
• shipyard
• vocational school
Model: YCW0804T
Material : Aluminum (die casting) and ABS
Size : 345 x 180 x 20mm
Weight : 600g
Sanagard GmbH | Ramsteinerstrasse 6 | CH-4052 Basel / Switzerland | Tel. +41 (0)61 312 13 60 | Fax +41 (0) 61 312 13 61 | [email protected] | www.sanagard.ch
Specification
Front
345 mm
220
mm
Back
210
mm
20 mm
43
mm
Specification
Overall angle
Left wing
Support
Magnifying glass
Body
Fastener
Shape drawing
Compass support
Handle
Push bar
Overall angle
Half angle
Left wing
Support
Compass hole
Right wing
Handle
Compass support
Body
Fastener
Push bar
Magnifying glass
Compass hole
Right wing
Half angle
Inside Miter
Outside Miter
Detailed Description and Using Method
This multi-functional goniomter measures overall angle or half the overall angle (miter angle) simultaneously.
Inside miter angle working method
Copy the angle of left and right wings by opening them, mount central push bar into the slot of cutter sawing blade by
tightening fastener and set one side wing bar to match the reference face of cutting machine by rotation it.
Detailed Description and Using Method
Two methods of working on outside miter angle
(when used in combination with cutting machine)
(1) Read the numeric on the ruler after copying the outside angle, match the part to the same nimber on the bottom and
cut it by setting it to cutting machine.
(2) Mark outside angle by using plane wood etc., draw line, copy the line and cut the part by mounting it to cutting machine
- a simpler method than (1)
Detailed Description and Using Method
Method of cutting after marking (miter angle)
Tighten the faster after copying outside angle or inside
angle and mark by attaching the Goniometer to the
side of member and the push bar in the center closley.
Overall angle cutting method
Copy the inside angle or outside angle, tighten up
fastener and mark by attaching the wing push bar
mounted in the left and right wing bars to the side of
member closely.