C60 & C75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • No Drainboard
specifications
LIFETIME GUARANTEE
ITEM#
C _ _ -1_ _ - 0 0
MODEL#
PROJECT
C60 C75 (specify)
MODEL
D
A
AXB
D
E
-178-00
12” x 18”
16”
22½”
-154-00
15” x 24”
19”
28½”
-168-00
16” x 18”
20”
22½”
-161-00
16” x 21”
20”
25½”
-188-00
18” x 18”
22”
22½”
-181-00
18” x 21”
22”
25½”
-184-00
18” x 24”
22”
28½”
-121-00
20” x 21”
24”
25½”
-124-00
20” x 24”
24”
28½”
-123-00
20” x 30”
24”
34½”
-144-00
24” x 24”
28”
28½”
-143-00
24” x 30”
28”
34½”
R3/4"
B E
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-1XX-00
[1]-1
C60 & C75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • Lt Drainboard
specifications
LIFETIME GUARANTEE
D
C
A
R3/4"
B E
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
C _ _ -1_ _ - _ 0
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-80
-178-40
-30
-80
-154-40
-30
-80
-168-40
-30
-80
-161-40
-30
-80
-188-40
-30
-80
-181-40
-30
-80
-184-40
-30
-80
-121-40
-30
-80
-124-40
-30
-80
-123-40
-30
-80
-144-40
-30
-80
-143-40
-30
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
32”
38”
44”
35”
41”
47”
36”
42”
48”
36”
42”
48”
38”
44”
50”
38”
44”
50”
38”
44”
50”
40”
46”
52”
40”
46”
52”
40”
46”
52”
44”
50”
56”
44”
50”
56”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-1XX-XO
[1]-2
ITEM#
C60 & C75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • Rt Drainboard
specifications
LIFETIME GUARANTEE
D
A
C
R3/4"
E
B
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
ITEM#
C _ _ -1_ _ - 0 _
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-08
-178-04
-03
-08
-154-04
-03
-08
-168-04
-03
-08
-161-04
-03
-08
-188-04
-03
-08
-181-04
-03
-08
-184-04
-03
-08
-121-04
-03
-08
-124-04
-03
-08
-123-04
-03
-08
-144-04
-03
-08
-143-04
-03
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
32”
38”
44”
35”
41”
47”
36”
42”
48”
36”
42”
48”
38”
44”
50”
38”
44”
50”
38”
44”
50”
40”
46”
52”
40”
46”
52”
40”
46”
52”
44”
50”
56”
44”
50”
56”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-1XX-0X
[1]-3
C60 & C75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • L&R Drainboards
specifications
LIFETIME GUARANTEE
D
A
C
C
R3/4"
E
B
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
C _ _ -1_ _ - _ _
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-88
-178-44
-33
-88
-154-44
-33
-88
-168-44
-33
-88
-161-44
-33
-88
-188-44
-33
-88
-181-44
-33
-88
-184-44
-33
-88
-121-44
-33
-88
-124-44
-33
-88
-123-44
-33
-88
-144-44
-33
-88
-143-44
-33
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
48”
60”
72”
51”
63”
75”
52”
64”
76”
52”
64”
76”
54”
66”
78”
54”
66”
78”
54”
66”
78”
56”
68”
80”
56”
68”
80”
56”
68”
80”
60”
72”
84”
60”
72”
84”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-1XX-XX
[1]-4
ITEM#
C60 & C75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • No Drainboard
specifications
LIFETIME GUARANTEE
C _ _ -2 _ _ - 0 0
MODEL#
PROJECT
C60 C75 (specify)
MODEL
D
A
ITEM#
A
AXB
D
E
-278-00
12” x 18”
29”
22½”
-254-00
15” x 24”
35”
28½”
-268-00
16” x 18”
37”
22½”
-261-00
16” x 21”
37”
25½”
-288-00
18” x 18”
41”
22½”
-281-00
18” x 21”
41”
25½”
-284-00
18” x 24”
41”
28½”
-221-00
20” x 21”
45”
25½”
-224-00
20” x 24”
45”
28½”
-223-00
20” x 30”
45”
34½”
-244-00
24” x 24”
53”
28½”
-243-00
24” x 30”
53”
34½”
R3/4"
B E
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-2XX-00
[1]-5
C60 & C75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • Lt Drainboard
specifications
LIFETIME GUARANTEE
D
A
C
A
R3/4"
E
B
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
C _ _ -2 _ _ - _ 0
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-80
-278-40
-30
-80
-254-40
-30
-80
-268-40
-30
-80
-261-40
-30
-80
-288-40
-30
-80
-281-40
-30
-80
-284-40
-30
-80
-221-40
-30
-80
-224-40
-30
-80
-223-40
-30
-80
-244-40
-30
-80
-243-40
-30
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
45”
51”
57”
51”
57”
63”
53”
59”
65”
53”
59”
65”
57”
63”
69”
57”
63”
69”
57”
63”
69”
61”
67”
73”
61”
67”
73”
61”
67”
73”
69”
75”
81”
69”
75”
81”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-2XX-XO
[1]-6
ITEM#
C60 & C75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • Rt Drainboard
specifications
LIFETIME GUARANTEE
D
A
A
C
R3/4"
E
B
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
ITEM#
C _ _ -2 _ _ - 0 _
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-08
-278-04
-03
-08
-254-04
-03
-08
-268-04
-03
-08
-261-04
-03
-08
-288-04
-03
-08
-281-04
-03
-08
-284-04
-03
-08
-221-04
-03
-08
-224-04
-03
-08
-223-04
-03
-08
-244-04
-03
-08
-243-04
-03
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
45”
51”
57”
51”
57”
63”
53”
59”
65”
53”
59”
65”
57”
63”
69”
57”
63”
69”
57”
63”
69”
61”
67”
73”
61”
67”
73”
61”
67”
73”
69”
75”
81”
69”
75”
81”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-2XX-0X
[1]-7
C60 & C75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • L&R Drainboards
specifications
LIFETIME GUARANTEE
D
C
A
A
C
R3/4"
E
B
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
C _ _ -2 _ _ - _ _
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-88
-278-44
-33
-88
-254-44
-33
-88
-268-44
-33
-88
-261-44
-33
-88
-288-44
-33
-88
-281-44
-33
-88
-284-44
-33
-88
-221-44
-33
-88
-224-44
-33
-88
-223-44
-33
-88
-244-44
-33
-88
-243-44
-33
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
61”
73”
85”
67”
79”
91”
69”
81”
93”
69”
81”
93”
73”
85”
97”
73”
85”
97”
73”
85”
97”
77”
89”
101”
77”
89”
101”
77”
89”
101”
85”
97”
109”
85”
97”
109”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-2XX-XX
[1]-8
ITEM#
C60 & C75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • No Drainboard
specifications
LIFETIME GUARANTEE
D
A
A
ITEM#
C _ _-3_ _- 00
MODEL#
PROJECT
C60 C75 (specify)
MODEL
A
AXB
D
E
-378-00
12” x 18”
42”
22½”
-354-00
15” x 24”
51”
28½”
-368-00
16” x 18”
54”
22½”
-361-00
16” x 21”
54”
25½”
-388-00
18” x 18”
60”
22½”
-381-00
18” x 21”
60”
25½”
-384-00
18” x 24”
60”
28½”
-321-00
20” x 21”
66”
25½”
-324-00
20” x 24”
66”
28½”
-323-00
20” x 30”
66”
34½”
-344-00
24” x 24”
78”
28½”
-343-00
24” x 30”
78”
34½”
R3/4"
B E
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-3XX-00
[1]-9
C60 & C75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • Lt Drainboard
specifications
LIFETIME GUARANTEE
D
C
A
A
A
R3/4"
E
B
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
C _ _-3_ _-_0
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-80
-378-40
-30
-80
-354-40
-30
-80
-368-40
-30
-80
-361-40
-30
-80
-388-40
-30
-80
-381-40
-30
-80
-384-40
-30
-80
-321-40
-30
-80
-324-40
-30
-80
-323-40
-30
-80
-344-40
-30
-80
-343-40
-30
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
58”
64”
70”
67”
73”
79”
70”
76”
82”
70”
76”
82”
76”
82”
88”
76”
82”
88”
76”
82”
88”
82”
88”
94”
82”
88”
94”
82”
88”
94”
94”
100”
106”
94”
100”
106”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-3XX-X0
[1]-10
ITEM#
C60 & C75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • Rt Drainboard
specifications
LIFETIME GUARANTEE
D
A
A
A
C
R3/4"
E
B
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
ITEM#
C _ _-3_ _- 0_
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-08
-378-04
-03
-08
-354-04
-03
-08
-368-04
-03
-08
-361-04
-03
-08
-388-04
-03
-08
-381-04
-03
-08
-384-04
-03
-08
-321-04
-03
-08
-324-04
-03
-08
-323-04
-03
-08
-344-04
-03
-08
-343-04
-03
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
58”
64”
70”
67”
73”
79”
70”
76”
82”
70”
76”
82”
76”
82”
88”
76”
82”
88”
76”
82”
88”
82”
88”
94”
82”
88”
94”
82”
88”
94”
94”
100”
106”
94”
100”
106”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-3XX-0X
[1]-11
C60 & C75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • L&R Drainboards
specifications
C
LIFETIME GUARANTEE
D
A
A
A
C
R3/4"
B
E
Ø3 1/2"
Ø1 1/8"
8"
ROUGH-IN
SECTION
2"
1 1/2"
9"
2"
14"
22"
B/2 +
2 1/2"
FAUCET
38"
SCREW HOLES
42 1/2"
MATERIAL
y C60 Series 16 gauge, type 304 stainless
y C75 Series 14 gauge, type 304 stainless
-Sink bowl(s)
-Drainboard(s)1
-Backsplash
y Type 304 stainless steel
-Basket drains
-Apron front2
-Leg sockets
-Sink legs & feet
MECHANICAL
y Backsplash is 9” tall with a 2” wide return.
y Tile edge is 1” tall with pre-punched
mounting holes, ¼” diameter.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
43"
36"
2 1/2"
FEATURES
y Sink bowl(s) are ‘True Gauge’, not drawn.
y Sanitary rolled rim is 2” tall x 1½” wide.
y Coved compartments are ¾” radius, both
horizontal and vertical.
y Unitized construction. Stiffeners welded
directly to sink bowls ensure maximum
rigidity.2
y Full front apron enclosure is standard.2
y Leg sockets are welded directly to sink
bowl providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y Tile edge is provided with pre-punched
mounting holes to securely fasten sink to
the wall.
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Custom configurations are available.
y NSF approved.
y Lifetime warranty.
y Proudly made in the USA.
1 n/a when drainboards are not present.
2 n/a for one compartment sinks.
C _ _-3_ _-_ _
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-88
-378-44
-33
-88
-354-44
-33
-88
-368-44
-33
-88
-361-44
-33
-88
-388-44
-33
-88
-381-44
-33
-88
-384-44
-33
-88
-321-44
-33
-88
-324-44
-33
-88
-323-44
-33
-88
-344-44
-33
-88
-343-44
-33
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
74”
86”
98”
83”
95”
107”
86”
98”
110”
86”
98”
110”
92”
104”
116”
92”
104”
116”
92”
104”
116”
98”
110”
122”
98”
110”
122”
98”
110”
122”
110”
122”
134”
110”
122”
134”
E
22½”
28½”
22½”
25½”
22½”
25½”
28½”
25½”
28½”
34½”
28½”
34½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
CXX-3XX-XX
[1]-12
ITEM#
T60 & T75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • No Drainboard
specifications
LIFETIME GUARANTEE
ITEM#
T_ _ -1_ _ - 0 0
MODEL#
PROJECT
T60 T75 (specify)
D
A
B E
MODEL
AXB
D
E
-188-00
18” x 18”
21”
21½”
-181-00
18” x 21”
21”
24½”
-148-00
24” x 18”
27”
21½”
-144-00
24” x 24”
27”
27½”
-138-00
30” x 18”
33”
21½”
-134-00
30” x 24”
33”
27½”
-194-00
36” x 24”
39”
27½”
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
1 applicable when drainboards are present.
TXX-1XX-00
[1]-13
T60 & T75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • Lt Drainboard
specifications
LIFETIME GUARANTEE
T_ _ -1_ _ - _ 0
MODEL#
PROJECT
T60 T75 (specify)
D
C
ITEM#
A
MODEL
AXB
-80
-188-40
B E
Ø3 1/2"
Ø1 1/8"
SECTION
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
42"
36"
2"
18” x 21”
30” 49½”
-80
18” 43½”
24” x 18”
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series reversible
drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
30” 55½”
-80
18” 43½”
24” x 24”
30” 55½”
-80
18” 49½”
30” x 18”
24” 55½” 21½”
-30
30” 61½”
-80
18” 49½”
30” x 24”
24” 55½” 27½”
-30
30” 61½”
-80
18” 55½”
-194-40
36” x 24”
24” 61½” 27½”
30” 67½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
www.griffinproducts.com
© 2006 Griffin Products, Inc.
TXX-1XX-XO
[1]-14
24” 49½” 27½”
-30
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
1 applicable when drainboards are present.
24” 49½” 21½”
-30
-30
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
24” 43½” 24½”
-30
-134-40
12"
24” 43½” 21½”
18” 37½”
-138-40
2"
1 1/2"
18” x 18”
-80
-144-40
E
18” 37½”
30” 49½”
-148-40
ROUGH-IN
D
-30
-181-40
8"
C
T60 & T75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • Rt Drainboard
specifications
LIFETIME GUARANTEE
ITEM#
T_ _ -1_ _ - 0 _
MODEL#
PROJECT
T60 T75 (specify)
D
A
C
MODEL
AXB
-08
-188-04
E
B
Ø3 1/2"
8"
SECTION
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
42"
36"
2"
18” x 21”
30” 49½”
-08
18” 43½”
24” x 18”
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
24” 49½” 21½”
-03
30” 55½”
-08
18” 43½”
24” x 24”
24” 49½” 27½”
-03
30” 55½”
-08
18” 49½”
30” x 18”
24” 55½” 21½”
-03
30” 61½”
-08
18” 49½”
30” x 24”
24” 55½” 27½”
-03
30” 61½”
-08
18” 55½”
-194-04
36” x 24”
-03
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
24” 43½” 24½”
-03
-134-04
12"
24” 43½” 21½”
18” 37½”
-138-04
2"
1 1/2"
18” x 18”
-08
-144-04
E
18” 37½”
30” 49½”
-148-04
ROUGH-IN
D
-03
-181-04
Ø1 1/8"
C
24” 61½” 27½”
30” 67½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
1 applicable when drainboards are present.
TXX-1XX-0X
[1]-15
T60 & T75
SERIES
SCULLERY SINKS
SERIES
1-Compartment • L&R Drainboards
specifications
LIFETIME GUARANTEE
ITEM#
T_ _ -1_ _ - _ _
MODEL#
PROJECT
T60 T75 (specify)
D
A
C
MODEL
C
AXB
C
D
18”
54”
24”
66” 21½”
-33
30”
78”
-88
18”
54”
24”
66” 24½”
-33
30”
78”
-88
18”
60”
24”
72” 21½”
-33
30”
84”
-88
18”
60”
24”
72” 27½”
-33
30”
84”
-88
18”
66”
24”
78” 21½”
-33
30”
90”
-88
18”
66”
24”
78” 27½”
-33
30”
90”
-88
18”
72”
24”
84” 27½”
30”
96”
-88
-188-44
E
B
Ø3 1/2"
-181-44
8"
Ø1 1/8"
-148-44
-144-44
ROUGH-IN
SECTION
-138-44
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
-134-44
12"
42"
36"
2"
-194-44
18” x 18”
18” x 21”
24” x 18”
24” x 24”
30” x 18”
30” x 24”
36” x 24”
-33
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series reversible
drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
www.griffinproducts.com
© 2006 Griffin Products, Inc.
TXX-1XX-XX
[1]-16
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
1 applicable when drainboards are present.
E
T60 & T75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • No Drainboard
specifications
LIFETIME GUARANTEE
T_ _ -2 _ _ - 0 0
MODEL#
PROJECT
T60 T75 (specify)
MODEL
D
A
ITEM#
A
AXB
D
E
-254-00
15” x 24”
33”
27½”
-288-00
18” x 18”
39”
21½”
-281-00
18” x 21”
39”
24½”
-284-00
18” x 24”
39”
27½”
-241-00
24” x 21”
51”
24½”
-244-00
24” x 24”
51”
27½”
-231-00
30” x 21”
63”
24½”
-234-00
30” x 24”
63”
27½”
-233-00
30” x 30”
63”
33½”
B E
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
1 applicable when drainboards are present.
TXX-2XX-00
[1]-17
T60 & T75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • Lt Drainboard
specifications
LIFETIME GUARANTEE
D
A
C
A
B E
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series reversible
drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
T_ _ -2 _ _ - _ 0
MODEL#
PROJECT
T60 T75 (specify)
MODEL
-80
-254-40
-30
-80
-288-40
-30
-80
-281-40
-30
-80
-284-40
-30
-80
-241-40
-30
-80
-244-40
-30
-80
-231-40
-30
-80
-234-40
-30
-80
-233-40
-30
AXB
15” x 24”
18” x 18”
18” x 21”
18” x 24”
24” x 21”
24” x 24”
30” x 21”
30” x 24”
30” x 30”
www.griffinproducts.com
© 2006 Griffin Products, Inc.
TXX-2XX-XO
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
49½”
55½”
61½”
55½”
61½”
67½”
55½”
61½”
67½”
55½”
61½”
67½”
67½”
73½”
79½”
67½”
73½”
79½”
79½”
85½”
91½”
79½”
85½”
91½”
79½”
85½”
91½”
E
27½”
21½”
24½”
27½”
24½”
27½”
24½”
27½”
33½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
1 applicable when drainboards are present.
[1]-18
ITEM#
T60 & T75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • Rt Drainboard
specifications
LIFETIME GUARANTEE
D
A
A
C
E
B
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
ITEM#
T_ _ -2 _ _ - 0 _
MODEL#
PROJECT
T60 T75 (specify)
MODEL
-08
-254-04
-03
-08
-288-04
-03
-08
-281-04
-03
-08
-284-04
-03
-08
-241-04
-03
-08
-244-04
-03
-08
-231-04
-03
-08
-234-04
-03
-08
-233-04
-03
AXB
15” x 24”
18” x 18”
18” x 21”
18” x 24”
24” x 21”
24” x 24”
30” x 21”
30” x 24”
30” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
49½”
55½”
61½”
55½”
61½”
67½”
55½”
61½”
67½”
55½”
61½”
67½”
67½”
73½”
79½”
67½”
73½”
79½”
79½”
85½”
91½”
79½”
85½”
91½”
79½”
85½”
91½”
E
27½”
21½”
24½”
27½”
24½”
27½”
24½”
27½”
33½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
1 applicable when drainboards are present.
TXX-2XX-0X
[1]-19
T60 & T75
SERIES
SCULLERY SINKS
SERIES
2-Compartments • L&R Drainboards
specifications
LIFETIME GUARANTEE
D
C
A
A
C
E
B
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series reversible
drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
T_ _ -2 _ _ - _ _
MODEL#
PROJECT
T60 T75 (specify)
MODEL
-88
-254-44
-33
-88
-288-44
-33
-88
-281-44
-33
-88
-284-44
-33
-88
-241-44
-33
-88
-244-44
-33
-88
-231-44
-33
-88
-234-44
-33
-88
-233-44
-33
AXB
15” x 24”
18” x 18”
18” x 21”
18” x 24”
24” x 21”
24” x 24”
30” x 21”
30” x 24”
30” x 30”
www.griffinproducts.com
© 2006 Griffin Products, Inc.
TXX-2XX-XX
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
66”
78”
90”
72”
84”
96”
72”
84”
96”
72”
84”
96”
84”
96”
108”
84”
96”
108”
96”
108”
120”
96”
108”
120”
96”
108”
120”
E
27½”
21½”
24½”
27½”
24½”
27½”
24½”
27½”
33½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
1 applicable when drainboards are present.
[1]-20
ITEM#
T60 & T75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • No Drainboard
specifications
LIFETIME GUARANTEE
PROJECT
AXB
D
E
-378-00
12” x 18”
39”
21½”
-371-00
12” x 21”
39”
24½”
-354-00
15” x 24”
48”
27½”
-368-00
16” x 18”
51”
21½”
-361-00
16” x 21”
51”
24½”
-388-00
18” x 18”
57”
21½”
-381-00
18” x 21”
57”
24½”
-384-00
18” x 24”
57”
27½”
-321-00
20” x 21”
63”
24½”
-324-00
20” x 24”
63”
27½”
-323-00
20” x 30”
63”
33½”
-341-00
24” x 21”
75”
24½”
-344-00
24” x 24”
75”
27½”
-343-00
24” x 30”
75”
33½”
-334-00
30” x 24”
93”
27½”
-333-00
30” x 30”
93”
33½”
A
B E
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
B/2 + 2"
FAUCET
38"
22"
T_ _ -3 _ _ - 0 0
MODEL#
T60 T75 (specify)
MODEL
D
A
A
ITEM#
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
1 applicable when drainboards are present.
TXX-3XX-00
[1]-21
T60 & T75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • Lt Drainboard
specifications
LIFETIME GUARANTEE
D
C
A
A
A
B E
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series reversible
drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
T_ _ -3 _ _ - _ 0
MODEL#
PROJECT
T60 T75 (specify)
MODEL
-80
-378-40
-30
-80
-354-40
-30
-80
-368-40
-30
-80
-361-40
-30
-80
-388-40
-30
-80
-381-40
-30
-80
-384-40
-30
-80
-321-40
-30
-80
-324-40
-30
-80
-323-40
-30
-80
-344-40
-30
-80
-343-40
-30
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
www.griffinproducts.com
© 2006 Griffin Products, Inc.
TXX-3XX-XO
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
E
55½”
61½” 21½”
67½”
64½”
70½” 27½”
76½”
67½”
73½” 21½”
79½”
67½”
73½” 24½”
79½”
73½”
79½” 21½”
85½”
73½”
79½” 24½”
85½”
73½”
79½” 27½”
85½”
79½”
85½” 24½”
91½”
79½”
85½” 27½”
91½”
79½”
85½” 33½”
91½”
91½”
97½” 27½”
103½”
91½”
97½” 33½”
103½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
1 applicable when drainboards are present.
[1]-22
ITEM#
T60 & T75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • Rt Drainboard
specifications
LIFETIME GUARANTEE
D
A
A
A
C
E
B
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
ITEM#
T_ _ -3 _ _ - 0 _
MODEL#
PROJECT
T60 T75 (specify)
MODEL
-08
-378-04
-03
-08
-354-04
-03
-08
-368-04
-03
-08
-361-04
-03
-08
-388-04
-03
-08
-381-04
-03
-08
-384-04
-03
-08
-321-04
-03
-08
-324-04
-03
-08
-323-04
-03
-08
-344-04
-03
-08
-343-04
-03
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
E
55½”
61½” 21½”
67½”
64½”
70½” 27½”
76½”
67½”
73½” 21½”
79½”
67½”
73½” 24½”
79½”
73½”
79½” 21½”
85½”
73½”
79½” 24½”
85½”
73½”
79½” 27½”
85½”
79½”
85½” 24½”
91½”
79½”
85½” 27½”
91½”
79½”
85½” 33½”
91½”
91½”
97½” 27½”
103½”
91½”
97½” 33½”
103½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
www.griffinproducts.com
© 2006 Griffin Products, Inc.
1 applicable when drainboards are present.
TXX-3XX-0X
[1]-23
T60 & T75
SERIES
SCULLERY SINKS
SERIES
3-Compartments • L&R Drainboards
specifications
C
LIFETIME GUARANTEE
D
A
A
A
C
E
B
Ø3 1/2"
8"
Ø1 1/8"
ROUGH-IN
SECTION
2"
1 1/2"
8"
2"
14"
22"
B/2 + 2"
FAUCET
38"
MATERIAL
y T60 Series 16 gauge, type 304 stainless
y T75 Series 14 gauge, type 304 stainless
-Sink compartment(s)
-Backsplash
-Drainboard(s)1
y Type 304 stainless steel
-Basket drains
-Sink legs
-Leg sockets
-Bullet feet
MECHANICAL
y Backsplash is 8” tall (relative to partition
and drainboard) with a 2” wide return.
y Faucet holes are 11/8” diameter on 8” centers (sinks with cumulative A dimension
greater than 54” are provided two sets of
faucet holes).
y Sink legs are 15/8” dia. with adjustable feet.
y Drain openings are 3½”, recessed.
y Basket drains are 1½” IPS.
y Supply is ½” IPS, hot and cold.
12"
42"
36"
2"
FEATURES
y Unibody construction provides maximum
durability.
y Sanitary rolled rim is 1½” wide and 2” tall.1
y Sink compartments are square corner.
y Leg sockets are welded directly to sink
body providing proper load support.
y Drainboard(s) are pitched to drain into
adjacent sink bowl.1
y All seams are TIG welded and ground to a
smooth #4 satin finish.
y Flood level is 14”.
y Compatibile with DR series reversible
drainboards.
y Custom configurations are available.
y Lifetime warranty.
y Proudly made in the USA.
T_ _ -3 _ _ - _ _
MODEL#
PROJECT
C60 C75 (specify)
MODEL
-88
-378-44
-33
-88
-354-44
-33
-88
-368-44
-33
-88
-361-44
-33
-88
-388-44
-33
-88
-381-44
-33
-88
-384-44
-33
-88
-321-44
-33
-88
-324-44
-33
-88
-323-44
-33
-88
-344-44
-33
-88
-343-44
-33
AXB
12” x 18”
15” x 24”
16” x 18”
16” x 21”
18” x 18”
18” x 21”
18” x 24”
20” x 21”
20” x 24”
20” x 30”
24” x 24”
24” x 30”
www.griffinproducts.com
© 2006 Griffin Products, Inc.
TXX-3XX-XX
C
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
18”
24”
30”
D
72”
84”
96”
81”
93”
105”
84”
96”
108”
84”
96”
108”
90”
102”
114”
90”
102”
114”
90”
102”
114”
96”
108”
120”
96”
108”
120”
96”
108”
120”
108”
120”
132”
108”
120”
132”
E
21½”
27½”
21½”
24½”
21½”
24½”
27½”
24½”
27½”
33½”
27½”
33½”
ACCESSORIES
y FS-108 8” swing spout faucet
y FS-112 12” swing spout faucet
y FS-114 14” swing spout faucet
y FA-100 Wrist blade handles
y FA-200 Articulating swing arm
y FR-128 Pre-rinse spray.
y WL-200 2” IPS lever drain
y WL-201 2” IPS lever drain w/ overflow
We welcome the opportunity to help you
design and configure equipment to suit your
specific needs.
In keeping with our policy of continuing
product improvement, we reserve the right
to change product specifications without
notice.
GRIFFIN PRODUCTS, INC.
303 Blue Bird Parkway
Wills Point, TX 75169
(800) 379-9709 tel
(903) 873-6389 fax
1 applicable when drainboards are present.
[1]-24
ITEM#