PROJECT INFORMATION
MEDMASTER™
Surgical Suite Luminaires
Job Name
Fixture Type
M3SE SERIES – LF
Catalog Number
2×2
PRODUCT FEATURES:
Approved by
»» Recessed grid ceiling mount for 1.0” and 1.5” T-Bar – 2'×2', 2'×4'
»» High output Exam lighting up to 8 lamps (2×4)
»» Symmetrical high reflectance powder coat reflectors
»» Sureshield™ mesh filter reduces radiated emissions
2×4
SPECIFICATIONS
HOUSING: .050" aluminum. Hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Antimicrobial finish is
standard on exposed painted surfaces of installed luminaire.
HOUSING FLANGE: .050" aluminum. Mitered and welded corners then spot-welded to housing before painting.
DOORFRAME: 18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe
secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. Antimicrobial finish is standard on exposed painted surfaces of installed
luminaire. Doorframe Gasket: One-piece closed cell extruded nitrile gasket seals doorframe to housing.
LENS: Two piece design. Smooth lens exterior is .125" clear acrylic, sealed to doorframe with silicone sealant. Interior lens is .030" acrylic micro linear prism, both lenses mechanically secured in
place. See options for alternate lens.
OPTICS: Symmetric reflectors are CRS with a high reflectance powder coated surface.
SURESHIELD™: Stainless steel mesh filter reduces radiated emissions.
ELECTRICAL: Electronic ballast <10% THD. Standard with RFI suppressors. Lamps by others.
INSTALLATION: 1.0" and 1.5" T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-bar ceilings.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and
FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Radiated and conducted emissions controlled as per MIL-STD-461F (listing standard with RS ballast). CCEA Approved.
IP65
K230
ISO 5
Class 100
MIL STD
461F
CCEA
Approved
ORDERING INFORMATION (Ex: M3SEGI24-8-54-RS-120-2F-PAH-MLP)
Model
Lamp Qty/Type
Ballast Type
Voltage
Doorframe
Housing
RS
Model
M3SEGI22 2×2
M3SEGI24 2×4
Lamp Qty/Type
2×2
6-24 Six F24T5HO
2×4
8-54 Eight F54T5HO
Lens Type
Options
PAH
Ballast Type
RS Rapid Start Electronic <10% THD
Housing Option
PAH .050" Painted
Antimicrobial Aluminum
Voltage
120 120 Volts
277 277 Volts
Options
EL* Standard Lumen EL Pack
PEL* High Lumen EL Pack
SEL* Specified EL Pack
FS Fuse & Holder
GL Green Phosphor Lamps
(54W T5HO, 550nm only, 2 lamps included)
HD Hinged Door (w/o NSF listings)
HJ Sealed Wireway
RFI Additional RFI filter (1)
EC Earthquake Clips
TC T-Bar Clips
Lens Type
MLP Micro Linear Prism (STD)
SL Specified Lens
Doorframe Options
2F 18-Ga CRS Painted Antimicrobial (STD)
AF Anodized Aluminum
PAF Painted (Antimicrobial) Fabricated Aluminum
5F 18-Ga Type 304 SS Brushed
*Remote mounted; adds 3" height to fixture
DIMENSIONAL DATA
GASKET PROFILE
CROSS SECTION
T-BAR INTERFACE
A
Housing
Doorfame
Fixture
Housing
D
Housing
7.63"
T-Bar Grid
Max 1.5"
Gasket
E
F
B
Doorframe
Flange
C
Flange
DIMENSIONAL DATA (IN INCHES)
2×2
2×4
A
B
C
DEF
22.60×24.0022.20×22.2023.75×23.75 24.00
22.60×48.0022.20×46.2023.75×49.27 48.00
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
22.60
46.60
23.75
47.75
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
M3SEGI_22_24-012714