Sandvik DQ500
DQ500
Technical Specification
07256-2
2007-05-01
APPLICATION
The powerpack of DQ500 consists of a Caterpillar
diesel engine and a gearbox, which divides the
power for hydraulic pumps and flushing air compressor. The powerpack is mounted crosswise at the rear
end of the superstructure to keep counterweight on
the opposite side of the boom and feed regardless of
the drilling direction.
DQ500 has an ergonomic cabin to increase operator's safety and visibility. The cabin is certified for
R.O.P.S. (ISO-3471 Roll-Over Protection Structure)
and F.O.P.S. (ISO-3449 Falling Object Protection
Structure). Windows are laminated for added safety.
The noise level in the cabin is less than 80 dB(A). To
keep dust at a minimum, the cabin is fitted with efficient filters for incoming fresh air. Adjustable seat,
good visibility, adequate lighting and an optimum
working temperature are among the many features
ensuring a good operating environment. Drilling functions are proportionally controlled by one hydraulic
joystick. Several routine functions e.g. antijamming
are executed automatically. There are fewer levers
to make it easy to use. Driving, rear jack and winch
control can be done outside the cabin from the optional remote control box.
Sandvik DQ500 is a hydraulic, self-propelled, selfcontained, crawler based surface drilling rig
equipped with a cabin (F.O.P.S. and R.O.P.S.) and
rod handling system. It is meant for pilot hole drilling
in dimensional stone quarries and drills vertical, inclined or horizontal holes with a diameter of 45 - 89
mm (1 ¾" - 3 ½") utilizing 32, 38 or 45 mm (1 ¼", 1
½", or 1 ¾") extension rods.
DQ500 is equipped with HL 510, hydraulic top hammer rock drill. With high rotation torque, sufficient
flushing and sophisticated ergonomic drilling control
system the rig is well suited also in very fractured
rock conditions. The rock drill and articulated boom
are mounted on the turnable superstructure giving a
drilling coverage of 26,4 m2.
DQ500 has a hydraulic roll-over boom which makes
horizontal hole drilling easy. Horizontal holes can be
drilled in any direction. Chain feed and rod handler
are modified to minimize ground clearance. DQ500
has a remote control for boom movements for easy
positioning of the feed.
© 2007 Sandvik Mining and Construction
1/3
Sandvik DQ500
Technical Specification
07256-2
2007-05-01
DRILLING DIMENSIONS
1m
1m
TRANSPORT DIMENSIONS
3200
3600
6525
259
10700
© 2007 Sandvik Mining and Construction
7200
2/3
Sandvik DQ500
Technical Specification
07256-2
2007-05-01
STANDARD COMPONENTS
TRANSPORT DIMENSIONS
1.
2.
Rock drill
Chain feed
3
4.
5.
Rod handler
Hose reel
Boom
Weight (without options)
Width
Height
Total length
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
HL 510, hydraulic
CF 145H with
2 ground supports
RH 714 incl. 1 set of jaws
DB 800 SW, articulated
with roll-over
Carrier
Track mounted, turnable
superstructure 180°
Powerpack
Diesel driven, hydraulic
pumps and on-board compressor
Hydraulic system
Load sensing and open
center
Control system
THC 700, remote control
for boom system
Movable drill steel support
Operator's cabin
F.O.P.S. and R.O.P.S.
Dust collection
DC 800 H, hydraulic
system
Working lights
7 pcs
Gauge set
For accumulator pressure
checking
Reversing alarm
Service and spare
Manuals
parts manuals:
2 x paper copy
2 x CD-ROM (Toolman)
EU-safety devices
14 800 kg
2.5 m
3.6 m / 3.2 m
7.2 m / 10.7 m
THE JAWS FOR DRILL STEELS
1.
Drill steel
type
Extension
rods
2.
MF-rod
3.
Extension
rods
4.
MF-rod
5.
Extension
rods
6.
MF-rod
Note
-
Drill steel
diameter
32 mm
1 ¼"
32 mm
1 ¼"
38 mm
1 ½"
38 mm
1 ½"
45 mm
1 ¾"
45 mm
1 ¾"
Recommended
hole diameter
45 - 57 mm
1 ¾" - 2 ¼"
45 - 57 mm
1 ¾" - 2 ¼"
64 - 70 mm
2 ½" - 2 ¾"
64 - 70 mm
2 ½" - 2 ¾"
76 - 89 mm
3" - 3 ½"
76 - 89 mm
3" - 3 ½"
not with 10' MF-rods
if several jaws selected please specify jaws
assembled
SELECTION OF OPTIONS
1.
2.
3.
Air conditioning
Rod greasing system
P&Q electric vertical angle indicator (± 6 deg.)
4.
6.
Electric angle indicator TIM 2302 with aiming
unit
Measuring system TIM 2303 with aiming unit
- Not for horizontal drilling
Laser based measuring system TIM 2305
7.
8.
16.
Shut down of suction for water holes
17.
Sanrock Mini H hydraulic bit grinder
18.
Primary separator PE 50
19.
Radio with CD player
20.
Central lubrication system
21.
Kit for alternative steels
Electric filling pump for refuelling
22.
Water injection system with tank
23.
Water injection system w/o tank
24.
25.
Biogradeable hydraulic oil, Shell naturelle HFE
46 or HFE 68 (synthetic ester)
Extra manuals
10.
Remote control box; for rear ground support,
driving and oscillation
Remote control box + hydraulic winch with cable
tightness automatics (replaces and includes
previous option)
Hydraulic rear ground support
26.
First service kit for DQ500
11.
Three-bar grouser plates
27.
12.
Towing hook
28.
13.
Guides for grousers
14.
Fuel operated heater for cabin, hydr. oil and engine
Flushing control automatics
Special tools for HL 510, field kit
ID 880 817 19
Special tools for HL 510, complete
ID 152 257 68
Antifreeze for air lines
5.
9
15.
29.
Sandvik Mining and Construction reserves the right to change this specification without further notice.
© 2007 Sandvik
Mining
and Construction
Sandvik
Mining and
Construction
Oy
P.O.Box 100, FIN–33311 Tampere, Finland
Tel. +358 205 44 121, Telefax +358 205 44 4771
www.sandvik.com
3/3