CMCE 1110 – CONSTRUCTION DRAWING I
Instructor: Prof. Anderson
Drawing #3: Geometric Constructions
On a properly formatted & bordered 18” x 24” piece of drafting vellum (with proper title block in
the lower right corner), you are to construct a series of (9) nine objects using geometric
construction techniques.
• The 18” x 24” will be divided into (3) rows.
o This assignment will have no indents from the borders to the guide boxes.
o The top (2) two rows will be divided into 4 columns. (As a result, each of the top two
rows will have (4) four guide boxes)
o Each guide box will be 5 5/8” square and will have no spacing in between them. (The
guide boxes are also to be given a dark, presentable border).
•
The third row will not be the same dimensions as the top two rows.
o The third row will be directly underneath row #2 and will have only (1) one guide box
in it.
o This guide box will have a measurement of 5 ¾” high x 11 4/16” wide.
Please refer to the handouts to see the exact nature or each exercise that is to be
constructed within each of the (9) nine guide boxes.
Do not wait until the last minute; this assignment will take time!
Assignment Due Date:
1
2