User Manual & Assembly Instructions
Fixed & Adjustable Leg Height
Examination Couches
Introduction
This User Manual is designed to ensure that users are equipped with the information
required to competently and responsibly operate the couch. It is IMPORTANT that the User
Manual is read in its entirety prior to assembly and operation.
It is recommended that the User Manual be kept in an easily assessable place for quick
reference. Warnings within this manual should be strictly adhered to as failure to do so could
result in harm to the patient, or the operator.
Ease of use, functionality and cleaning practicality are key features of the CareTek
examination couches. The couches are manufactured to comply with the essential
requirements of the Medical Devices Directive 93/42 EEC and where applicable take in
elements of the International Standard IEC 60601-2-38.
Parts Identification
Before beginning the assembly process check that all parts are correct to the below
diagram which is showing the adjustable leg height couch. If you have purchased a fixed
height couch then the head and foot frame assemblies will look slightly different to the
assemblies shown below. If any parts are missing please contact your supplier.
1 x Head End Assembly Frame
1 x Foot End Assembly Frame
1 x Couch Top Main Assembly Frame
2 x M5 x 20 Cap Screws and 2 x M5 Nylock Nuts
4 x M8 x 15 Cap Screws
1 x M8 Allen key 1 x M5 Allen key 1 x M5 Spanner for assembly.
1 x Head End
Assembly Frame
1 x Foot End
Assembly Frame
2 x M5 x 20 Cap Screws
2 x M5 Nylock Nuts
1 x Couch Top
Assembly Frame
4 x M8 x 15 Cap Screws
Diagram 1
Flat Pack Delivery Assembly Instructions
WARNING: To prevent the risk of injury it is strongly recommended that the assembly process
be carried out by two people as some parts of the couch assembly are heavy and can be
awkward to manipulate into position.
(1)
Carefully remove the couch parts from the box.
(2)
Lay the couch top assembly frame on its back so as to expose the underside frame work
of the couch. It is recommended that this process be carried out on a carpeted floor, or
on a blanket to safe guard the upholstery.
(3)
The head and foot frame assemblies are not
interchangeable, but the paper towel rail is.
Factory setting is to the head end frame.
Diagram 2
Simply insert the head and foot panels into the
main frame corner sockets as shown in
(diagram 2). Using the M8 x 15 Cap Screws (2
per end) fix the two assemblies in place by
tightening the bolts securely.
(4)
Accessory Towel Rail can be positioned at
either head or foot end of the couch. Reposition
the rail by removing one black knob, withdraw
the rod from the leg assembly and reverse the
procedure at the opposite end.
(5)
If you have purchased an Adjustable Leg
Height couch it is strongly recommended that
leg positioning be carried out with the couch on
its back. Simply pull the knob to release the
spring tensioned pin. Adjust the leg to desired
height, release the pin to secure the position.
Diagram 2 shows the legs at their lowest height.
(6)
Backrest Lock Assembly - It is recommended
that the couch be placed on its side, or on its
feet for this procedure. Place the locking rods
through the lock plates by raising the backrest
to a position that allows the rods to slide
through. Lower the backrest to a position where
the bolt holes are exposed. Fix in place using
the M5 x 20 cap screws and nylock nuts.
To operate take the weight of the backrest with
one hand, pull the release handle up with the
other. Releasing the handle will fix the backrest
in to the desired position.
WARNING do not use the couch
without axle stop bolts in place.
WARNINGS & RECOMMENDATIONS
Read the user manual carefully before assembling and using the couch.
It is recommended that the assembly process be carried out by two people.
It is recommended that leg height adjustments be carried out with the couch on its back.
It is recommended that the couch is cleaned on a regular basis.
DO NOT use the couch without the backrest friction lock rod bolts securely in place.
DO NOT exceed the safe working load (SWL) of 170Kg 27 stone.
DO NOT allow children to play on or under the couch.
Cleaning
Wipe all surfaces with a soft cloth moistened with hot water and mild detergent. It is
recommended that the cloth be a white material to prevent bleeding of die colours. Rinse
with clean water and a dry clean cloth. To remove potentially infectious materials such as
body fluids, or when the couch has been used by someone with a known infection. Clean
with NaDCC (e.g. Presept, Actichlor) at 10,000 ppm of available chlorine. Rinse and dry.
Examination Couch Specifications (Fixed Height)
Overall Length
1830mm
Overall Width
600mm
Overall Height
775mm
Backrest Angle Adjustment
0º to 70º
Total Weight
37 Kg
Safe Working Load (SWL)
170 Kg
Examination Couch (Adjustable Leg Height)
Height Range
Low Height 550mm to 595, 640, 685, 750, 775mm
Warranty
CareTek standard terms and conditions apply to all sales. A copy of the terms and conditions which provides the full details of warranty terms and statutory rights of the customer
can be obtained upon request.
For service, maintenance and any questions regarding this or any other CareTek product
please contact CareTek directly.
CareTek Medical
Unit 1/37 Discovery Drive
Bibra Lake, WA 6163
Tel: +61 8 9418 2111
Fax: +61 8 9418 2114
Email: [email protected]
A Division of
CBLGROUP
AUSTRALIA PTY LTD
www.cblgroup.com.au