Primary Type: Formative Assessment
Status: Published
This is a resource from CPALMS (www.cpalms.org) where all educators go for bright ideas!
Resource ID#: 59737
Regular Hexagon in a Circle
Students are asked to construct a regular hexagon inscribed in a circle.
Subject(s): Mathematics
Grade Level(s): 9, 10, 11, 12
Intended Audience: Educators
Freely Available: Yes
Keywords: MFAS, construction, regular hexagon, inscribed, circle, compass, straightedge, arc, line segment
Resource Collection: MFAS Formative Assessments
ATTACHMENTS
MFAS_RegularHexagonInACircle_Worksheet.docx
FORMATIVE ASSESSMENT TASK
Instructions for Implementing the Task
Note: MAFS.912.G-CO.4.13 does not indicate specific construction tools and methods. This task and rubric assume the use of a compass and straightedge but can be
adapted for use with other tools such as reflective devices, paper folding, dynamic geometric software, etc. Throughout the geometry course, students should be exposed
to a variety of construction tools and methods.
This task can be implemented individually, with small groups, or with the whole class.
1. The teacher asks the student to complete the construction on the Regular Hexagon in a Circle worksheet.
2. The teacher asks follow-up questions as needed.
TASK RUBRIC
Getting Started
Misconception/Error
The student does not have an effective strategy for completing the construction.
Examples of Student Work at this Level
The student:
Uses the straightedge to draw six segments with vertices inside (or on) the circle.
page 1 of 5 Does not understand how to use a compass and straightedge.
Questions Eliciting Thinking
What is the difference between drawing and constructing?
When doing a geometric construction, what tools are typically used?
What is the difference between a straightedge and a ruler?
What is it that you are supposed to construct?
Can you describe a strategy for constructing a regular hexagon inside a circle? How can the radius of a circle help you with this construction?
Instructional Implications
Explain to the student the difference between drawing and constructing. Show the student the tools traditionally used in geometric constructions and explain the purpose
of each. Be sure the student understands the difference between a ruler and a straightedge.
Guide the student through the steps of the construction. (One method is described below.) Prompt the student to justify each step. Have the student remove any
unnecessary marks or marks made in error from his or her paper. Ask the student to write out the steps of the construction and keep them for future reference.
Construction: Use consecutive 60° arcs to construct a regular hexagon inscribed a circle.
Step 1: Use the given center and the straightedge to construct a radius of the circle. Use the compass to measure the radius.
Step 2: Using this radius, place the point of the compass at the endpoint of the radius on the circle and make an arc that intersects the circle.
Step 3: Keeping the same radius, place the point of the compass at the point of intersection of the arc (from step 2) and make another arc that intersects the circle.
Step 4: Continue making consecutive arcs around the circle as described in step 3 until the circle has been divided into six 60º arcs.
Step 5: Construct the sides of the regular hexagon by connecting the endpoints of the consecutive 60° arcs.
Allow the student to visualize the construction process. This link provides a step-by-step process for constructing a regular hexagon inscribed in a circle using a compass and
straight edge (http://www.mathopenref.com/constinhexagon.html).
Websites such as www.mathopenref.com show the steps of many different constructions. The student is able to watch the construction unfold but can also pause it when
necessary.
Have the student construct a regular hexagon inscribed in a circle using paper folding:
Step 1: Given a circle on translucent paper, fold the paper so that two halves of the circle coincide. The crease of the fold is a diameter of the circle. Label the endpoints of
the diameter C and F.
Step 2: Fold so that endpoint F coincides with the center of the circle and make a firm crease. This fold produces two vertices of the regular hexagon on the circle. Label
these vertices A and E.
Step 3: Repeat step 2 by folding endpoint C so that it coincides with the center of the circle and make a firm crease. This fold produces two more vertices of the regular
hexagon on the circle. Label the vertex between points A and C (in minor arc
), point B. Label the remaining vertex D.
Step 4: Use a straightedge and pencil to construct the sides of regular hexagon ABCDE.
Ask the student to compare the paper folding method to the compass and straightedge construction above.
Moving Forward
Misconception/Error
The student attempts an effective strategy but makes a significant error.
Examples of Student Work at this Level
The student constructs six consecutive 60° arcs on the circle but:
Does not use the intersection of each arc with the circle for the vertices of the hexagon.
Does not maintain the same radius setting on the compass for the six arcs.
Questions Eliciting Thinking
Can you explain how you constructed your regular hexagon?
You constructed six arcs around the circle. What is the next step in the construction process?
Why did you construct the arcs around the circle but your hexagon is drawn inside the circle? Where should the vertices of the hexagon be?
page 2 of 5 What type of hexagon are you constructing? What does it mean for a geometric figure to be regular?
What must be true of the setting on your compass in order to ensure that the sides of the hexagon are congruent and the vertices lie on the circle?
How did you determine the radius setting on your compass?
You drew a number of arcs on your paper. Were all of them necessary for this construction?
Instructional Implications
Review how to use a compass to measure the radius of a circle and then guide the student through the part(s) of the construction that contain errors. Have the student
remove any unnecessary marks or marks made in error. Ask the student to write out the steps of the construction and keep them for future reference.
Explain to the student the need to precisely locate points in constructions. Help the student find a way to hold the compass so as not to inadvertently change the radius
setting.
Allow the student to view the construction process on a website such as www.mathopenref.com. The student is able to watch the construction unfold but can also pause
it when necessary. To view a step-by-step process for constructing a regular hexagon in a circle using a compass and straight edge go to:
http://www.mathopenref.com/constinhexagon.html.
Assist the student in developing a justification for the construction strategy used. Ask the student to use postulates, definitions, or theorems to explain the results of each
step of the construction and to justify why the strategy results in a regular hexagon. Provide feedback as needed.
Almost There
Misconception/Error
The student’s construction lacks precision.
Examples of Student Work at this Level
The student uses an effective strategy to construct a regular hexagon inscribed in a circle but:
Draws large dots where each arc intersects the circle, reducing the level of precision.
Does not use the exact point where each arc intersects the circle to connect the sides of the hexagon.
Leaves unnecessary construction marks on the paper.
Questions Eliciting Thinking
Can you explain the steps of your construction?
How did you locate the points you used to construct the sides of the hexagon? Did you draw the sides so that they contain these points?
Are there any adjustments you could make to your construction to make it more precise?
What do these arcs (or markings) represent? Did you use them in your construction?
page 3 of 5 Instructional Implications
Explain to the student the need to precisely locate and connect points in constructions. Emphasize that drawing large dots at intersections reduces the precision of the
construction. Ask the student to explain why large dots (or any at all) can affect the precision of a geometric construction.
Ask the student to remove any unnecessary marks or marks made in error from his or her paper.
Allow the student to view the construction process on a website such as www.mathopenref.com. The student is able to watch the construction unfold but can also pause
it when necessary. Written step-by-step descriptions are also provided.
Ask the student to use postulates, definitions, or theorems to explain the results of each step of the construction and to justify why the strategy results in an equilateral
triangle.
Got It
Misconception/Error
The student provides complete and correct responses to all components of the task.
Examples of Student Work at this Level
The student correctly constructs an equilateral triangle inscribed in the circle using an effective strategy. The student’s construction is precise and contains no unnecessary
marks or marks made in error.
Questions Eliciting Thinking
Why does this approach enable one to construct a regular hexagon in a circle? Why does this method work?
Can you think of another strategy for constructing a regular hexagon in a circle?
How can you expand your construction of a regular hexagon to construct a regular dodecagon with twelve congruent sides?
Instructional Implications
Ask the student to use postulates, definitions, or theorems to explain the results of each step of the construction and to justify why the strategy results in a regular
hexagon.
Challenge the student to use other theorems or definitions to find other methods to construct a regular hexagon inscribed in a circle.
Challenge the student to expand this construction process to include steps for constructing a regular dodecagon with twelve congruent sides.
Consider implementing other G-CO.4.13 tasks.
ACCOMMODATIONS & RECOMMENDATIONS
Special Materials Needed:
Regular Hexagon in a Circle worksheet
Compass and straightedge,
Translucent paper,
Reflective devices, or
Dynamic geometry software
SOURCE AND ACCESS INFORMATION
Contributed by: MFAS FCRSTEM
Name of Author/Source: MFAS FCRSTEM
District/Organization of Contributor(s): Okaloosa
Is this Resource freely Available? Yes
Access Privileges: Public
License: CPALMS License - no distribution - non commercial
Related Standards
Name
MAFS.912.G-CO.4.13:
Description
Construct an equilateral triangle, a square, and a regular hexagon inscribed in a circle.
page 4 of 5 page 5 of 5