EC6000
Stellar® Service Crane
EC6000
TECHNICAL SPECIFICATION GUIDE
Our People. Our Products.
EC6000
TECHNICAL SPECIFICATION GUIDE
SPECIFICATION INFORMATION
Crane Rating: Standard Boom Length:
38,000 ft-lbs (5.25 ton-meters)
11’ (3.35 m) from CL of Crane
Boom Extension:
• 1st stage:
• 2nd stage:
Hydraulic 60” (152.4 cm)
Manual 60” (152.4 cm)
Max. Horizontal Reach:
21’ (6.40 m) from CL of Crane
Maximum Vertical Lift:
(from crane base)
22’ 10” (6.96 m)
Boom Elevation:
-5 to +80 degree
Stowed Height:
(crane only)
34.41” (87.40 cm)
Mounting Space Required:
20” x 21” (50.8 x 53.3 cm)
Shipping Weight:
1600 lbs (725 kg)
Controls:
Radio control standard for all
functions
Winch
• Rope Length:
• Rope Diameter:
• Line pull speed:
• Max. single part line:
• Max. double part line:
90’ (27.4 m)
5/16” (.79 cm)
16 ft/min (4.88 m/min)
3000 lbs (1360 Kg)
6000 lbs (2720 Kg)
Rotation:
400 degree power
(worm gear)
Lifting Capacities:
6000 lbs @ 6’4” (2720 Kg @ 1.9 m)
1810 lbs @ 21’ (820 Kg @ 6.4 m)
Power Supply Required:
12 volt power unit
2.0 gpm @ 2900 psi
(7.57 lpm @ 200 bars)
Min. Rec. Chassis (GVRW)
16,000
NOTE: All Stellar® cranes meet ANSI B30.5 and OSHA 1910.180 specifications.
Specifications subject to change without notification.
DEFINING CHARACTERISTICS
Planetary Drive Winch System
The winch is equipped with a 2.5 HP permanent
magnet electric motor with a 199:1 planetary gear
reduction system. This ensures that your winch
will never quit lifting before it reaches the full rated
capacity.
Double Boom Design
The double boom design makes it nearly twice as
strong as the nearest competitor.
Gear Bearing Rotation
No plastic bushings or brass gears in the rotation
system. It uses a high strength steel ball bearing
turntable gear, a high strength steel worm gear, and
a cast steel worm gear housing.
Integral Rotation Stop
400 degrees of rotation with an integrated rotation
stop. Integrated stops allow the best performance
while protecting wires and hoses from damage.
21’ of Reach
Hydraulic 1st stage extension. Manual 2nd stage
extension.
Radio Remote
Comes standard with a radio remote control.
Environmentally Friendly Hydraulic Oil
Stellar Industries uses environmentally friendly
hydraulic oil in their EC Series of cranes, that is
non-toxic, non-carcinogenic and that is recyclable
and biodegradable.
stellarindustries.com
EC6000 CAPACITY CHART
6000 lbs
2720 kg
GEOMETRIC DIMENSIONS
Reach in Feet/Meters
Capacity in Pounds/Kilograms
6000 lbs
2720 kg
21.42
22'10"
6.96m
24.77
3600 lbs
1630 kg
18'
5.49m
6000 lbs
2720 kg
6000 lbs
2545 lbs
2720 kg
1150 kg
4715 lbs
2135 kg
15'
4.57m
149.74
3340 lbs
6000 lbs
2720 kg
2080 lbs
1510 kg
6000 lbs
80º
940 kg
2720 kg
6000 lbs
75º
136.72
12'
3.66m
2720 kg
60º
CG
2730 lbs
4845 lbs
1235 kg
2195 kg
45º
9'
2.74m
18.06
1870 lbs
3965 lbs
845 kg
1795 kg
2450 lbs
30º
6'
1.83m
1110 kg
36.69
3560 lbs
15º
34.41
1610 kg
3'
.914 m
3450 lbs
1560 kg
0'
3'
.914 m
6'
1.83m
9'
2.74m
Weight of load handling devices are
part of
lifted and
mustare
be
Weight
of the
loadload
handling
devices
deducted
from
the and
capacity.
part
of the load
lifted
must be
deducted from the capacity.
11'
3.35m
2375 lbs
1075 kg
16'
4.87m
1810 lbs
820 kg
0'
21'
6.40m
Maximum 1 - part line capacity is
3000
lbs (1360
kg). line
For capacity
greater loads,
Maximum
1 - part
is
use 2 - part line.
3000 lbs. (1360 kg). For greater
loads, use 2 - part line.
ROTATIONAL CLEARANCE
HOLE MOUNTING DETAIL
Motor
Ø1.063
4 Places
14.75
Ø6.00
7.38
7.38
14.75
30.38” (77.17 cm)
®
SERVICE BODY MOUNT
Mounts on 20” deep (or larger) side packs.
2
1
Item Part
Description
Qty.
1
42985 Cap Scr 0.88-9x1.75 HHGR8ZY 4
2
8648
Washer 0.88 SAE GR8
4
Your local distributor:
®
Our People. Our Products.
190 State Street
P.O. Box 169
Garner, IA 50438
Telephone: (641) 923-3741 • (800) 321-3741
Fax: (641) 923-2812
Internet: www.stellarindustries.com
Email: [email protected]
For the most up to date version of this brochure, please visit www.stellarindustries.com.
An Employee Owned Company.
Copyright © 2016 Stellar Industries, Inc.
STL000074 9/16