Upright ™
Supportive Shopping Cart Cover
Instruction Manual
IMPORTANT!
KEEP INSTRUCTIONS FOR FUTURE USE.
Read all instructions before assembling and using this product. Failure to follow each
instruction can result in serious injury or death to your baby.
WARNING:
Possible entanglement or strangulation injury. This product
and its straps are not toys. Do not leave child unattended with product or straps at any time.
Keep straps out of child’s reach. Do not attach this product or its straps to a crib or playpen.
The safety harness is only intended for use with this product. Adult assembly required.
WARNING:
Do not use this seat cover as a child restraint in a motor
vehicle. This product will not properly restrain your child in the event of a crash.
KEEP AWAY from fire and strong sources of heat.
Always secure the child into the seat cover with the safety harness, and always secure the
seat cover onto the restaurant highchair or shopping cart as directed. Not following these
instructions can result in serious injury.
This box contains: 1-shopping cart cover 1-safety harness
Care Instruction for Cart Cover:
Remove safety harness before washing. Machine wash cold, gentle cycle. Drip dry.
Instructions: Shopping Cart
1. Position the UprightTM, pattern
side up, over the child seat area
of the shopping cart. Place the
back cushion against the back
of the seat as shown.
4. Feed safety harness around the
back of the shopping cart and
back through the buttonhole.
Pull on belt to be sure the cover
is attached to the cart.
2. Slide the front elastic flap
over the front of the shopping cart. The leg hole area
will match up to cart when
positioned correctly.
5. Place baby in seat and secure
safety harness around them and
buckle. Listen for the audible
“click” to ensure buckle has
latched securely.
3. You can position the side
bumpers on either the
inside of the cart for more
stability, or over the sides of
the cart for older babies.
6. To use the smart device activity
pocket, simply slide your smart
device into the pocket. Secure
by closing the top flap.
Instructions: Highchair
1. Position the UprightTM, (pattern side up),
over the child seat area of the highchair.
Place the back pillow cushion in the
chair and drape the cover over the
entire seat as shown. Leg hole area will
match up to highchair when positioned
correctly. Drape the side bumpers over
the sides of the highchair.
2. To secure cover to highchair,
feed safety harness around
the back of the highchair and
back through buttonhole.
3. Place baby in seat and
secure harness around
them and buckle. Listen
for the audible “click” to
ensure buckle has latched
securely.
Instructions: Storage
You can either fold product as you wish or roll up and secure with carry straps.
1. Remove UrpightTM from shopping
cart or highchair.
2. Follow these images to see
how to fold the cover up.
When complete, secure with
the two elastic bands on the
underside of the cover.
© 2012 Infantino, LLC
4920 Carroll Canyon Road, Suite 200 | San Diego, CA 92121 USA
www.infantino.com
BEFORE USING THIS PRODUCT: Review and save the Instruction Manual for future reference. Please call Infantino at
1-800-840-4916 (for US or Canada) with any questions or visit our website www.infantino.com. Made in China.